tcp: Fix race in tcp_poll
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / watchdog / i6300esb.c
blob7ba0b11ec525d2bd84f4ebfe72b4e0e5912ff2b4
1 /*
2 * i6300esb: Watchdog timer driver for Intel 6300ESB chipset
4 * (c) Copyright 2004 Google Inc.
5 * (c) Copyright 2005 David Härdeman <david@2gen.com>
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
12 * based on i810-tco.c which is in turn based on softdog.c
14 * The timer is implemented in the following I/O controller hubs:
15 * (See the intel documentation on http://developer.intel.com.)
16 * 6300ESB chip : document number 300641-004
18 * 2004YYZZ Ross Biro
19 * Initial version 0.01
20 * 2004YYZZ Ross Biro
21 * Version 0.02
22 * 20050210 David Härdeman <david@2gen.com>
23 * Ported driver to kernel 2.6
27 * Includes, defines, variables, module parameters, ...
30 #include <linux/module.h>
31 #include <linux/types.h>
32 #include <linux/kernel.h>
33 #include <linux/fs.h>
34 #include <linux/mm.h>
35 #include <linux/miscdevice.h>
36 #include <linux/watchdog.h>
37 #include <linux/platform_device.h>
38 #include <linux/init.h>
39 #include <linux/pci.h>
40 #include <linux/ioport.h>
41 #include <linux/uaccess.h>
42 #include <linux/io.h>
44 /* Module and version information */
45 #define ESB_VERSION "0.04"
46 #define ESB_MODULE_NAME "i6300ESB timer"
47 #define ESB_DRIVER_NAME ESB_MODULE_NAME ", v" ESB_VERSION
48 #define PFX ESB_MODULE_NAME ": "
50 /* PCI configuration registers */
51 #define ESB_CONFIG_REG 0x60 /* Config register */
52 #define ESB_LOCK_REG 0x68 /* WDT lock register */
54 /* Memory mapped registers */
55 #define ESB_TIMER1_REG (BASEADDR + 0x00)/* Timer1 value after each reset */
56 #define ESB_TIMER2_REG (BASEADDR + 0x04)/* Timer2 value after each reset */
57 #define ESB_GINTSR_REG (BASEADDR + 0x08)/* General Interrupt Status Register */
58 #define ESB_RELOAD_REG (BASEADDR + 0x0c)/* Reload register */
60 /* Lock register bits */
61 #define ESB_WDT_FUNC (0x01 << 2) /* Watchdog functionality */
62 #define ESB_WDT_ENABLE (0x01 << 1) /* Enable WDT */
63 #define ESB_WDT_LOCK (0x01 << 0) /* Lock (nowayout) */
65 /* Config register bits */
66 #define ESB_WDT_REBOOT (0x01 << 5) /* Enable reboot on timeout */
67 #define ESB_WDT_FREQ (0x01 << 2) /* Decrement frequency */
68 #define ESB_WDT_INTTYPE (0x11 << 0) /* Interrupt type on timer1 timeout */
70 /* Reload register bits */
71 #define ESB_WDT_TIMEOUT (0x01 << 9) /* Watchdog timed out */
72 #define ESB_WDT_RELOAD (0x01 << 8) /* prevent timeout */
74 /* Magic constants */
75 #define ESB_UNLOCK1 0x80 /* Step 1 to unlock reset registers */
76 #define ESB_UNLOCK2 0x86 /* Step 2 to unlock reset registers */
78 /* internal variables */
79 static void __iomem *BASEADDR;
80 static DEFINE_SPINLOCK(esb_lock); /* Guards the hardware */
81 static unsigned long timer_alive;
82 static struct pci_dev *esb_pci;
83 static unsigned short triggered; /* The status of the watchdog upon boot */
84 static char esb_expect_close;
85 static struct platform_device *esb_platform_device;
87 /* module parameters */
88 /* 30 sec default heartbeat (1 < heartbeat < 2*1023) */
89 #define WATCHDOG_HEARTBEAT 30
90 static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
91 module_param(heartbeat, int, 0);
92 MODULE_PARM_DESC(heartbeat,
93 "Watchdog heartbeat in seconds. (1<heartbeat<2046, default="
94 __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
96 static int nowayout = WATCHDOG_NOWAYOUT;
97 module_param(nowayout, int, 0);
98 MODULE_PARM_DESC(nowayout,
99 "Watchdog cannot be stopped once started (default="
100 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
103 * Some i6300ESB specific functions
107 * Prepare for reloading the timer by unlocking the proper registers.
108 * This is performed by first writing 0x80 followed by 0x86 to the
109 * reload register. After this the appropriate registers can be written
110 * to once before they need to be unlocked again.
112 static inline void esb_unlock_registers(void)
114 writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
115 writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
118 static int esb_timer_start(void)
120 u8 val;
122 spin_lock(&esb_lock);
123 esb_unlock_registers();
124 writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
125 /* Enable or Enable + Lock? */
126 val = ESB_WDT_ENABLE | (nowayout ? ESB_WDT_LOCK : 0x00);
127 pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
128 spin_unlock(&esb_lock);
129 return 0;
132 static int esb_timer_stop(void)
134 u8 val;
136 spin_lock(&esb_lock);
137 /* First, reset timers as suggested by the docs */
138 esb_unlock_registers();
139 writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
140 /* Then disable the WDT */
141 pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x0);
142 pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val);
143 spin_unlock(&esb_lock);
145 /* Returns 0 if the timer was disabled, non-zero otherwise */
146 return val & ESB_WDT_ENABLE;
149 static void esb_timer_keepalive(void)
151 spin_lock(&esb_lock);
152 esb_unlock_registers();
153 writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
154 /* FIXME: Do we need to flush anything here? */
155 spin_unlock(&esb_lock);
158 static int esb_timer_set_heartbeat(int time)
160 u32 val;
162 if (time < 0x1 || time > (2 * 0x03ff))
163 return -EINVAL;
165 spin_lock(&esb_lock);
167 /* We shift by 9, so if we are passed a value of 1 sec,
168 * val will be 1 << 9 = 512, then write that to two
169 * timers => 2 * 512 = 1024 (which is decremented at 1KHz)
171 val = time << 9;
173 /* Write timer 1 */
174 esb_unlock_registers();
175 writel(val, ESB_TIMER1_REG);
177 /* Write timer 2 */
178 esb_unlock_registers();
179 writel(val, ESB_TIMER2_REG);
181 /* Reload */
182 esb_unlock_registers();
183 writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
185 /* FIXME: Do we need to flush everything out? */
187 /* Done */
188 heartbeat = time;
189 spin_unlock(&esb_lock);
190 return 0;
194 * /dev/watchdog handling
197 static int esb_open(struct inode *inode, struct file *file)
199 /* /dev/watchdog can only be opened once */
200 if (test_and_set_bit(0, &timer_alive))
201 return -EBUSY;
203 /* Reload and activate timer */
204 esb_timer_start();
206 return nonseekable_open(inode, file);
209 static int esb_release(struct inode *inode, struct file *file)
211 /* Shut off the timer. */
212 if (esb_expect_close == 42)
213 esb_timer_stop();
214 else {
215 printk(KERN_CRIT PFX
216 "Unexpected close, not stopping watchdog!\n");
217 esb_timer_keepalive();
219 clear_bit(0, &timer_alive);
220 esb_expect_close = 0;
221 return 0;
224 static ssize_t esb_write(struct file *file, const char __user *data,
225 size_t len, loff_t *ppos)
227 /* See if we got the magic character 'V' and reload the timer */
228 if (len) {
229 if (!nowayout) {
230 size_t i;
232 /* note: just in case someone wrote the magic character
233 * five months ago... */
234 esb_expect_close = 0;
236 /* scan to see whether or not we got the
237 * magic character */
238 for (i = 0; i != len; i++) {
239 char c;
240 if (get_user(c, data + i))
241 return -EFAULT;
242 if (c == 'V')
243 esb_expect_close = 42;
247 /* someone wrote to us, we should reload the timer */
248 esb_timer_keepalive();
250 return len;
253 static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
255 int new_options, retval = -EINVAL;
256 int new_heartbeat;
257 void __user *argp = (void __user *)arg;
258 int __user *p = argp;
259 static struct watchdog_info ident = {
260 .options = WDIOF_SETTIMEOUT |
261 WDIOF_KEEPALIVEPING |
262 WDIOF_MAGICCLOSE,
263 .firmware_version = 0,
264 .identity = ESB_MODULE_NAME,
267 switch (cmd) {
268 case WDIOC_GETSUPPORT:
269 return copy_to_user(argp, &ident,
270 sizeof(ident)) ? -EFAULT : 0;
272 case WDIOC_GETSTATUS:
273 return put_user(0, p);
275 case WDIOC_GETBOOTSTATUS:
276 return put_user(triggered, p);
278 case WDIOC_SETOPTIONS:
280 if (get_user(new_options, p))
281 return -EFAULT;
283 if (new_options & WDIOS_DISABLECARD) {
284 esb_timer_stop();
285 retval = 0;
288 if (new_options & WDIOS_ENABLECARD) {
289 esb_timer_start();
290 retval = 0;
292 return retval;
294 case WDIOC_KEEPALIVE:
295 esb_timer_keepalive();
296 return 0;
298 case WDIOC_SETTIMEOUT:
300 if (get_user(new_heartbeat, p))
301 return -EFAULT;
302 if (esb_timer_set_heartbeat(new_heartbeat))
303 return -EINVAL;
304 esb_timer_keepalive();
305 /* Fall */
307 case WDIOC_GETTIMEOUT:
308 return put_user(heartbeat, p);
309 default:
310 return -ENOTTY;
315 * Kernel Interfaces
318 static const struct file_operations esb_fops = {
319 .owner = THIS_MODULE,
320 .llseek = no_llseek,
321 .write = esb_write,
322 .unlocked_ioctl = esb_ioctl,
323 .open = esb_open,
324 .release = esb_release,
327 static struct miscdevice esb_miscdev = {
328 .minor = WATCHDOG_MINOR,
329 .name = "watchdog",
330 .fops = &esb_fops,
334 * Data for PCI driver interface
336 * This data only exists for exporting the supported
337 * PCI ids via MODULE_DEVICE_TABLE. We do not actually
338 * register a pci_driver, because someone else might one day
339 * want to register another driver on the same PCI id.
341 static struct pci_device_id esb_pci_tbl[] = {
342 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
343 { 0, }, /* End of list */
345 MODULE_DEVICE_TABLE(pci, esb_pci_tbl);
348 * Init & exit routines
351 static unsigned char __devinit esb_getdevice(void)
354 * Find the PCI device
357 esb_pci = pci_get_device(PCI_VENDOR_ID_INTEL,
358 PCI_DEVICE_ID_INTEL_ESB_9, NULL);
360 if (!esb_pci)
361 return 0;
363 if (pci_enable_device(esb_pci)) {
364 printk(KERN_ERR PFX "failed to enable device\n");
365 goto err_devput;
368 if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
369 printk(KERN_ERR PFX "failed to request region\n");
370 goto err_disable;
373 BASEADDR = pci_ioremap_bar(esb_pci, 0);
374 if (BASEADDR == NULL) {
375 /* Something's wrong here, BASEADDR has to be set */
376 printk(KERN_ERR PFX "failed to get BASEADDR\n");
377 goto err_release;
380 /* Done */
381 return 1;
383 err_release:
384 pci_release_region(esb_pci, 0);
385 err_disable:
386 pci_disable_device(esb_pci);
387 err_devput:
388 pci_dev_put(esb_pci);
389 return 0;
392 static void __devinit esb_initdevice(void)
394 u8 val1;
395 u16 val2;
398 * Config register:
399 * Bit 5 : 0 = Enable WDT_OUTPUT
400 * Bit 2 : 0 = set the timer frequency to the PCI clock
401 * divided by 2^15 (approx 1KHz).
402 * Bits 1:0 : 11 = WDT_INT_TYPE Disabled.
403 * The watchdog has two timers, it can be setup so that the
404 * expiry of timer1 results in an interrupt and the expiry of
405 * timer2 results in a reboot. We set it to not generate
406 * any interrupts as there is not much we can do with it
407 * right now.
409 pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);
411 /* Check that the WDT isn't already locked */
412 pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
413 if (val1 & ESB_WDT_LOCK)
414 printk(KERN_WARNING PFX "nowayout already set\n");
416 /* Set the timer to watchdog mode and disable it for now */
417 pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
419 /* Check if the watchdog was previously triggered */
420 esb_unlock_registers();
421 val2 = readw(ESB_RELOAD_REG);
422 if (val2 & ESB_WDT_TIMEOUT)
423 triggered = WDIOF_CARDRESET;
425 /* Reset WDT_TIMEOUT flag and timers */
426 esb_unlock_registers();
427 writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG);
429 /* And set the correct timeout value */
430 esb_timer_set_heartbeat(heartbeat);
433 static int __devinit esb_probe(struct platform_device *dev)
435 int ret;
437 /* Check whether or not the hardware watchdog is there */
438 if (!esb_getdevice() || esb_pci == NULL)
439 return -ENODEV;
441 /* Check that the heartbeat value is within it's range;
442 if not reset to the default */
443 if (heartbeat < 0x1 || heartbeat > 2 * 0x03ff) {
444 heartbeat = WATCHDOG_HEARTBEAT;
445 printk(KERN_INFO PFX
446 "heartbeat value must be 1<heartbeat<2046, using %d\n",
447 heartbeat);
450 /* Initialize the watchdog and make sure it does not run */
451 esb_initdevice();
453 /* Register the watchdog so that userspace has access to it */
454 ret = misc_register(&esb_miscdev);
455 if (ret != 0) {
456 printk(KERN_ERR PFX
457 "cannot register miscdev on minor=%d (err=%d)\n",
458 WATCHDOG_MINOR, ret);
459 goto err_unmap;
461 printk(KERN_INFO PFX
462 "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
463 BASEADDR, heartbeat, nowayout);
464 return 0;
466 err_unmap:
467 iounmap(BASEADDR);
468 pci_release_region(esb_pci, 0);
469 pci_disable_device(esb_pci);
470 pci_dev_put(esb_pci);
471 return ret;
474 static int __devexit esb_remove(struct platform_device *dev)
476 /* Stop the timer before we leave */
477 if (!nowayout)
478 esb_timer_stop();
480 /* Deregister */
481 misc_deregister(&esb_miscdev);
482 iounmap(BASEADDR);
483 pci_release_region(esb_pci, 0);
484 pci_disable_device(esb_pci);
485 pci_dev_put(esb_pci);
486 return 0;
489 static void esb_shutdown(struct platform_device *dev)
491 esb_timer_stop();
494 static struct platform_driver esb_platform_driver = {
495 .probe = esb_probe,
496 .remove = __devexit_p(esb_remove),
497 .shutdown = esb_shutdown,
498 .driver = {
499 .owner = THIS_MODULE,
500 .name = ESB_MODULE_NAME,
504 static int __init watchdog_init(void)
506 int err;
508 printk(KERN_INFO PFX "Intel 6300ESB WatchDog Timer Driver v%s\n",
509 ESB_VERSION);
511 err = platform_driver_register(&esb_platform_driver);
512 if (err)
513 return err;
515 esb_platform_device = platform_device_register_simple(ESB_MODULE_NAME,
516 -1, NULL, 0);
517 if (IS_ERR(esb_platform_device)) {
518 err = PTR_ERR(esb_platform_device);
519 goto unreg_platform_driver;
522 return 0;
524 unreg_platform_driver:
525 platform_driver_unregister(&esb_platform_driver);
526 return err;
529 static void __exit watchdog_cleanup(void)
531 platform_device_unregister(esb_platform_device);
532 platform_driver_unregister(&esb_platform_driver);
533 printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
536 module_init(watchdog_init);
537 module_exit(watchdog_cleanup);
539 MODULE_AUTHOR("Ross Biro and David Härdeman");
540 MODULE_DESCRIPTION("Watchdog driver for Intel 6300ESB chipsets");
541 MODULE_LICENSE("GPL");
542 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);