?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ath9k: work around gcc ICEs (again)
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / serial / bfin_5xx.c
blobefcd44344fb1e011e9b6b926a67dfd5d0d2d6443
1 /*
2 * Blackfin On-Chip Serial Driver
3 *
4 * Copyright 2006-2007 Analog Devices Inc.
5 *
6 * Enter bugs at http://blackfin.uclinux.org/
7 *
8 * Licensed under the GPL-2 or later.
9 */
10
11 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
12 #define SUPPORT_SYSRQ
13 #endif
14
15 #include <linux/module.h>
16 #include <linux/ioport.h>
17 #include <linux/init.h>
18 #include <linux/console.h>
19 #include <linux/sysrq.h>
20 #include <linux/platform_device.h>
21 #include <linux/tty.h>
22 #include <linux/tty_flip.h>
23 #include <linux/serial_core.h>
24
25 #ifdef CONFIG_KGDB_UART
26 #include <linux/kgdb.h>
27 #include <asm/irq_regs.h>
28 #endif
29
30 #include <asm/gpio.h>
31 #include <asm/mach/bfin_serial_5xx.h>
32
33 #ifdef CONFIG_SERIAL_BFIN_DMA
34 #include <linux/dma-mapping.h>
35 #include <asm/io.h>
36 #include <asm/irq.h>
37 #include <asm/cacheflush.h>
38 #endif
39
40 /* UART name and device definitions */
41 #define BFIN_SERIAL_NAME "ttyBF"
42 #define BFIN_SERIAL_MAJOR 204
43 #define BFIN_SERIAL_MINOR 64
44
45 /*
46 * Setup for console. Argument comes from the menuconfig
47 */
48 #define DMA_RX_XCOUNT 512
49 #define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT)
50
51 #define DMA_RX_FLUSH_JIFFIES (HZ / 50)
52 #define CTS_CHECK_JIFFIES (HZ / 50)
53
54 #ifdef CONFIG_SERIAL_BFIN_DMA
55 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
56 #else
57 static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
58 #endif
59
60 static void bfin_serial_mctrl_check(struct bfin_serial_port *uart);
61
62 /*
63 * interrupts are disabled on entry
64 */
65 static void bfin_serial_stop_tx(struct uart_port *port)
66 {
67 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
68 struct circ_buf *xmit = &uart->port.info->xmit;
69
70 while (!(UART_GET_LSR(uart) & TEMT))
71 cpu_relax();
72
73 #ifdef CONFIG_SERIAL_BFIN_DMA
74 disable_dma(uart->tx_dma_channel);
75 xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
76 uart->port.icount.tx += uart->tx_count;
77 uart->tx_count = 0;
78 uart->tx_done = 1;
79 #else
80 #ifdef CONFIG_BF54x
81 /* Clear TFI bit */
82 UART_PUT_LSR(uart, TFI);
83 #endif
84 UART_CLEAR_IER(uart, ETBEI);
85 #endif
86 }
87
88 /*
89 * port is locked and interrupts are disabled
90 */
91 static void bfin_serial_start_tx(struct uart_port *port)
92 {
93 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
94
95 #ifdef CONFIG_SERIAL_BFIN_DMA
96 if (uart->tx_done)
97 bfin_serial_dma_tx_chars(uart);
98 #else
99 UART_SET_IER(uart, ETBEI);
100 bfin_serial_tx_chars(uart);
101 #endif
102 }
103
104 /*
105 * Interrupts are enabled
106 */
107 static void bfin_serial_stop_rx(struct uart_port *port)
108 {
109 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
110 #ifdef CONFIG_KGDB_UART
111 if (uart->port.line != CONFIG_KGDB_UART_PORT)
112 #endif
113 UART_CLEAR_IER(uart, ERBFI);
114 }
115
116 /*
117 * Set the modem control timer to fire immediately.
118 */
119 static void bfin_serial_enable_ms(struct uart_port *port)
120 {
121 }
122
123 #ifdef CONFIG_KGDB_UART
124 static int kgdb_entry_state;
125
126 void kgdb_put_debug_char(int chr)
127 {
128 struct bfin_serial_port *uart;
129
130 if (CONFIG_KGDB_UART_PORT < 0
131 || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
132 uart = &bfin_serial_ports[0];
133 else
134 uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
135
136 while (!(UART_GET_LSR(uart) & THRE)) {
137 SSYNC();
138 }
139
140 UART_CLEAR_DLAB(uart);
141 UART_PUT_CHAR(uart, (unsigned char)chr);
142 SSYNC();
143 }
144
145 int kgdb_get_debug_char(void)
146 {
147 struct bfin_serial_port *uart;
148 unsigned char chr;
149
150 if (CONFIG_KGDB_UART_PORT < 0
151 || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
152 uart = &bfin_serial_ports[0];
153 else
154 uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
155
156 while(!(UART_GET_LSR(uart) & DR)) {
157 SSYNC();
158 }
159 UART_CLEAR_DLAB(uart);
160 chr = UART_GET_CHAR(uart);
161 SSYNC();
162
163 return chr;
164 }
165 #endif
166
167 #if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO)
168 # define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold)
169 # define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v))
170 #else
171 # define UART_GET_ANOMALY_THRESHOLD(uart) 0
172 # define UART_SET_ANOMALY_THRESHOLD(uart, v)
173 #endif
174
175 #ifdef CONFIG_SERIAL_BFIN_PIO
176 static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
177 {
178 struct tty_struct *tty = uart->port.info->port.tty;
179 unsigned int status, ch, flg;
180 static struct timeval anomaly_start = { .tv_sec = 0 };
181
182 status = UART_GET_LSR(uart);
183 UART_CLEAR_LSR(uart);
184
185 ch = UART_GET_CHAR(uart);
186 uart->port.icount.rx++;
187
188 #ifdef CONFIG_KGDB_UART
189 if (uart->port.line == CONFIG_KGDB_UART_PORT) {
190 struct pt_regs *regs = get_irq_regs();
191 if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */
192 kgdb_breakkey_pressed(regs);
193 return;
194 } else if (kgdb_entry_state == 0 && ch == '$') {/* connection from KGDB */
195 kgdb_entry_state = 1;
196 } else if (kgdb_entry_state == 1 && ch == 'q') {
197 kgdb_entry_state = 0;
198 kgdb_breakkey_pressed(regs);
199 return;
200 } else if (ch == 0x3) {/* Ctrl + C */
201 kgdb_entry_state = 0;
202 kgdb_breakkey_pressed(regs);
203 return;
204 } else {
205 kgdb_entry_state = 0;
206 }
207 }
208 #endif
209
210 if (ANOMALY_05000363) {
211 /* The BF533 (and BF561) family of processors have a nice anomaly
212 * where they continuously generate characters for a "single" break.
213 * We have to basically ignore this flood until the "next" valid
214 * character comes across. Due to the nature of the flood, it is
215 * not possible to reliably catch bytes that are sent too quickly
216 * after this break. So application code talking to the Blackfin
217 * which sends a break signal must allow at least 1.5 character
218 * times after the end of the break for things to stabilize. This
219 * timeout was picked as it must absolutely be larger than 1
220 * character time +/- some percent. So 1.5 sounds good. All other
221 * Blackfin families operate properly. Woo.
222 */
223 if (anomaly_start.tv_sec) {
224 struct timeval curr;
225 suseconds_t usecs;
226
227 if ((~ch & (~ch + 1)) & 0xff)
228 goto known_good_char;
229
230 do_gettimeofday(&curr);
231 if (curr.tv_sec - anomaly_start.tv_sec > 1)
232 goto known_good_char;
233
234 usecs = 0;
235 if (curr.tv_sec != anomaly_start.tv_sec)
236 usecs += USEC_PER_SEC;
237 usecs += curr.tv_usec - anomaly_start.tv_usec;
238
239 if (usecs > UART_GET_ANOMALY_THRESHOLD(uart))
240 goto known_good_char;
241
242 if (ch)
243 anomaly_start.tv_sec = 0;
244 else
245 anomaly_start = curr;
246
247 return;
248
249 known_good_char:
250 anomaly_start.tv_sec = 0;
251 }
252 }
253
254 if (status & BI) {
255 if (ANOMALY_05000363)
256 if (bfin_revid() < 5)
257 do_gettimeofday(&anomaly_start);
258 uart->port.icount.brk++;
259 if (uart_handle_break(&uart->port))
260 goto ignore_char;
261 status &= ~(PE | FE);
262 }
263 if (status & PE)
264 uart->port.icount.parity++;
265 if (status & OE)
266 uart->port.icount.overrun++;
267 if (status & FE)
268 uart->port.icount.frame++;
269
270 status &= uart->port.read_status_mask;
271
272 if (status & BI)
273 flg = TTY_BREAK;
274 else if (status & PE)
275 flg = TTY_PARITY;
276 else if (status & FE)
277 flg = TTY_FRAME;
278 else
279 flg = TTY_NORMAL;
280
281 if (uart_handle_sysrq_char(&uart->port, ch))
282 goto ignore_char;
283
284 uart_insert_char(&uart->port, status, OE, ch, flg);
285
286 ignore_char:
287 tty_flip_buffer_push(tty);
288 }
289
290 static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
291 {
292 struct circ_buf *xmit = &uart->port.info->xmit;
293
294 /*
295 * Check the modem control lines before
296 * transmitting anything.
297 */
298 bfin_serial_mctrl_check(uart);
299
300 if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
301 bfin_serial_stop_tx(&uart->port);
302 return;
303 }
304
305 if (uart->port.x_char) {
306 UART_PUT_CHAR(uart, uart->port.x_char);
307 uart->port.icount.tx++;
308 uart->port.x_char = 0;
309 }
310
311 while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
312 UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
313 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
314 uart->port.icount.tx++;
315 SSYNC();
316 }
317
318 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
319 uart_write_wakeup(&uart->port);
320
321 if (uart_circ_empty(xmit))
322 bfin_serial_stop_tx(&uart->port);
323 }
324
325 static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
326 {
327 struct bfin_serial_port *uart = dev_id;
328
329 spin_lock(&uart->port.lock);
330 while (UART_GET_LSR(uart) & DR)
331 bfin_serial_rx_chars(uart);
332 spin_unlock(&uart->port.lock);
333
334 return IRQ_HANDLED;
335 }
336
337 static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
338 {
339 struct bfin_serial_port *uart = dev_id;
340
341 spin_lock(&uart->port.lock);
342 if (UART_GET_LSR(uart) & THRE)
343 bfin_serial_tx_chars(uart);
344 spin_unlock(&uart->port.lock);
345
346 return IRQ_HANDLED;
347 }
348 #endif
349
350 #ifdef CONFIG_SERIAL_BFIN_DMA
351 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
352 {
353 struct circ_buf *xmit = &uart->port.info->xmit;
354
355 uart->tx_done = 0;
356
357 /*
358 * Check the modem control lines before
359 * transmitting anything.
360 */
361 bfin_serial_mctrl_check(uart);
362
363 if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
364 uart->tx_count = 0;
365 uart->tx_done = 1;
366 return;
367 }
368
369 if (uart->port.x_char) {
370 UART_PUT_CHAR(uart, uart->port.x_char);
371 uart->port.icount.tx++;
372 uart->port.x_char = 0;
373 }
374
375 uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
376 if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail))
377 uart->tx_count = UART_XMIT_SIZE - xmit->tail;
378 blackfin_dcache_flush_range((unsigned long)(xmit->buf+xmit->tail),
379 (unsigned long)(xmit->buf+xmit->tail+uart->tx_count));
380 set_dma_config(uart->tx_dma_channel,
381 set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
382 INTR_ON_BUF,
383 DIMENSION_LINEAR,
384 DATA_SIZE_8,
385 DMA_SYNC_RESTART));
386 set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail));
387 set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
388 set_dma_x_modify(uart->tx_dma_channel, 1);
389 enable_dma(uart->tx_dma_channel);
390
391 UART_SET_IER(uart, ETBEI);
392 }
393
394 static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
395 {
396 struct tty_struct *tty = uart->port.info->port.tty;
397 int i, flg, status;
398
399 status = UART_GET_LSR(uart);
400 UART_CLEAR_LSR(uart);
401
402 uart->port.icount.rx +=
403 CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail,
404 UART_XMIT_SIZE);
405
406 if (status & BI) {
407 uart->port.icount.brk++;
408 if (uart_handle_break(&uart->port))
409 goto dma_ignore_char;
410 status &= ~(PE | FE);
411 }
412 if (status & PE)
413 uart->port.icount.parity++;
414 if (status & OE)
415 uart->port.icount.overrun++;
416 if (status & FE)
417 uart->port.icount.frame++;
418
419 status &= uart->port.read_status_mask;
420
421 if (status & BI)
422 flg = TTY_BREAK;
423 else if (status & PE)
424 flg = TTY_PARITY;
425 else if (status & FE)
426 flg = TTY_FRAME;
427 else
428 flg = TTY_NORMAL;
429
430 for (i = uart->rx_dma_buf.tail; i != uart->rx_dma_buf.head; i++) {
431 if (i >= UART_XMIT_SIZE)
432 i = 0;
433 if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i]))
434 uart_insert_char(&uart->port, status, OE,
435 uart->rx_dma_buf.buf[i], flg);
436 }
437
438 dma_ignore_char:
439 tty_flip_buffer_push(tty);
440 }
441
442 void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
443 {
444 int x_pos, pos;
445
446 uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
447 x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
448 uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
449 if (uart->rx_dma_nrows == DMA_RX_YCOUNT)
450 uart->rx_dma_nrows = 0;
451 x_pos = DMA_RX_XCOUNT - x_pos;
452 if (x_pos == DMA_RX_XCOUNT)
453 x_pos = 0;
454
455 pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos;
456 if (pos != uart->rx_dma_buf.tail) {
457 uart->rx_dma_buf.head = pos;
458 bfin_serial_dma_rx_chars(uart);
459 uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
460 }
461
462 mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
463 }
464
465 static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
466 {
467 struct bfin_serial_port *uart = dev_id;
468 struct circ_buf *xmit = &uart->port.info->xmit;
469
470 spin_lock(&uart->port.lock);
471 if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
472 disable_dma(uart->tx_dma_channel);
473 clear_dma_irqstat(uart->tx_dma_channel);
474 UART_CLEAR_IER(uart, ETBEI);
475 xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
476 uart->port.icount.tx += uart->tx_count;
477
478 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
479 uart_write_wakeup(&uart->port);
480
481 bfin_serial_dma_tx_chars(uart);
482 }
483
484 spin_unlock(&uart->port.lock);
485 return IRQ_HANDLED;
486 }
487
488 static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
489 {
490 struct bfin_serial_port *uart = dev_id;
491 unsigned short irqstat;
492
493 spin_lock(&uart->port.lock);
494 irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
495 clear_dma_irqstat(uart->rx_dma_channel);
496 spin_unlock(&uart->port.lock);
497
498 mod_timer(&(uart->rx_dma_timer), jiffies);
499
500 return IRQ_HANDLED;
501 }
502 #endif
503
504 /*
505 * Return TIOCSER_TEMT when transmitter is not busy.
506 */
507 static unsigned int bfin_serial_tx_empty(struct uart_port *port)
508 {
509 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
510 unsigned short lsr;
511
512 lsr = UART_GET_LSR(uart);
513 if (lsr & TEMT)
514 return TIOCSER_TEMT;
515 else
516 return 0;
517 }
518
519 static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
520 {
521 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
522 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
523 if (uart->cts_pin < 0)
524 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
525
526 if (UART_GET_CTS(uart))
527 return TIOCM_DSR | TIOCM_CAR;
528 else
529 #endif
530 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
531 }
532
533 static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
534 {
535 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
536 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
537 if (uart->rts_pin < 0)
538 return;
539
540 if (mctrl & TIOCM_RTS)
541 UART_CLEAR_RTS(uart);
542 else
543 UART_SET_RTS(uart);
544 #endif
545 }
546
547 /*
548 * Handle any change of modem status signal since we were last called.
549 */
550 static void bfin_serial_mctrl_check(struct bfin_serial_port *uart)
551 {
552 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
553 unsigned int status;
554 struct uart_info *info = uart->port.info;
555 struct tty_struct *tty = info->port.tty;
556
557 status = bfin_serial_get_mctrl(&uart->port);
558 uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
559 if (!(status & TIOCM_CTS)) {
560 tty->hw_stopped = 1;
561 uart->cts_timer.data = (unsigned long)(uart);
562 uart->cts_timer.function = (void *)bfin_serial_mctrl_check;
563 uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES;
564 add_timer(&(uart->cts_timer));
565 } else {
566 tty->hw_stopped = 0;
567 }
568 #endif
569 }
570
571 /*
572 * Interrupts are always disabled.
573 */
574 static void bfin_serial_break_ctl(struct uart_port *port, int break_state)
575 {
576 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
577 u16 lcr = UART_GET_LCR(uart);
578 if (break_state)
579 lcr |= SB;
580 else
581 lcr &= ~SB;
582 UART_PUT_LCR(uart, lcr);
583 SSYNC();
584 }
585
586 static int bfin_serial_startup(struct uart_port *port)
587 {
588 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
589
590 #ifdef CONFIG_SERIAL_BFIN_DMA
591 dma_addr_t dma_handle;
592
593 if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) {
594 printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n");
595 return -EBUSY;
596 }
597
598 if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) {
599 printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n");
600 free_dma(uart->rx_dma_channel);
601 return -EBUSY;
602 }
603
604 set_dma_callback(uart->rx_dma_channel, bfin_serial_dma_rx_int, uart);
605 set_dma_callback(uart->tx_dma_channel, bfin_serial_dma_tx_int, uart);
606
607 uart->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA);
608 uart->rx_dma_buf.head = 0;
609 uart->rx_dma_buf.tail = 0;
610 uart->rx_dma_nrows = 0;
611
612 set_dma_config(uart->rx_dma_channel,
613 set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
614 INTR_ON_ROW, DIMENSION_2D,
615 DATA_SIZE_8,
616 DMA_SYNC_RESTART));
617 set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT);
618 set_dma_x_modify(uart->rx_dma_channel, 1);
619 set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT);
620 set_dma_y_modify(uart->rx_dma_channel, 1);
621 set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf);
622 enable_dma(uart->rx_dma_channel);
623
624 uart->rx_dma_timer.data = (unsigned long)(uart);
625 uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout;
626 uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
627 add_timer(&(uart->rx_dma_timer));
628 #else
629 if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
630 "BFIN_UART_RX", uart)) {
631 # ifdef CONFIG_KGDB_UART
632 if (uart->port.line != CONFIG_KGDB_UART_PORT) {
633 # endif
634 printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
635 return -EBUSY;
636 # ifdef CONFIG_KGDB_UART
637 }
638 # endif
639 }
640
641 if (request_irq
642 (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
643 "BFIN_UART_TX", uart)) {
644 printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n");
645 free_irq(uart->port.irq, uart);
646 return -EBUSY;
647 }
648 #endif
649 UART_SET_IER(uart, ERBFI);
650 return 0;
651 }
652
653 static void bfin_serial_shutdown(struct uart_port *port)
654 {
655 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
656
657 #ifdef CONFIG_SERIAL_BFIN_DMA
658 disable_dma(uart->tx_dma_channel);
659 free_dma(uart->tx_dma_channel);
660 disable_dma(uart->rx_dma_channel);
661 free_dma(uart->rx_dma_channel);
662 del_timer(&(uart->rx_dma_timer));
663 dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0);
664 #else
665 #ifdef CONFIG_KGDB_UART
666 if (uart->port.line != CONFIG_KGDB_UART_PORT)
667 #endif
668 free_irq(uart->port.irq, uart);
669 free_irq(uart->port.irq+1, uart);
670 #endif
671 }
672
673 static void
674 bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
675 struct ktermios *old)
676 {
677 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
678 unsigned long flags;
679 unsigned int baud, quot;
680 unsigned short val, ier, lcr = 0;
681
682 switch (termios->c_cflag & CSIZE) {
683 case CS8:
684 lcr = WLS(8);
685 break;
686 case CS7:
687 lcr = WLS(7);
688 break;
689 case CS6:
690 lcr = WLS(6);
691 break;
692 case CS5:
693 lcr = WLS(5);
694 break;
695 default:
696 printk(KERN_ERR "%s: word lengh not supported\n",
697 __func__);
698 }
699
700 if (termios->c_cflag & CSTOPB)
701 lcr |= STB;
702 if (termios->c_cflag & PARENB)
703 lcr |= PEN;
704 if (!(termios->c_cflag & PARODD))
705 lcr |= EPS;
706 if (termios->c_cflag & CMSPAR)
707 lcr |= STP;
708
709 port->read_status_mask = OE;
710 if (termios->c_iflag & INPCK)
711 port->read_status_mask |= (FE | PE);
712 if (termios->c_iflag & (BRKINT | PARMRK))
713 port->read_status_mask |= BI;
714
715 /*
716 * Characters to ignore
717 */
718 port->ignore_status_mask = 0;
719 if (termios->c_iflag & IGNPAR)
720 port->ignore_status_mask |= FE | PE;
721 if (termios->c_iflag & IGNBRK) {
722 port->ignore_status_mask |= BI;
723 /*
724 * If we're ignoring parity and break indicators,
725 * ignore overruns too (for real raw support).
726 */
727 if (termios->c_iflag & IGNPAR)
728 port->ignore_status_mask |= OE;
729 }
730
731 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
732 quot = uart_get_divisor(port, baud);
733 spin_lock_irqsave(&uart->port.lock, flags);
734
735 UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
736
737 /* Disable UART */
738 ier = UART_GET_IER(uart);
739 UART_DISABLE_INTS(uart);
740
741 /* Set DLAB in LCR to Access DLL and DLH */
742 UART_SET_DLAB(uart);
743
744 UART_PUT_DLL(uart, quot & 0xFF);
745 UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
746 SSYNC();
747
748 /* Clear DLAB in LCR to Access THR RBR IER */
749 UART_CLEAR_DLAB(uart);
750
751 UART_PUT_LCR(uart, lcr);
752
753 /* Enable UART */
754 UART_ENABLE_INTS(uart, ier);
755
756 val = UART_GET_GCTL(uart);
757 val |= UCEN;
758 UART_PUT_GCTL(uart, val);
759
760 spin_unlock_irqrestore(&uart->port.lock, flags);
761 }
762
763 static const char *bfin_serial_type(struct uart_port *port)
764 {
765 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
766
767 return uart->port.type == PORT_BFIN ? "BFIN-UART" : NULL;
768 }
769
770 /*
771 * Release the memory region(s) being used by 'port'.
772 */
773 static void bfin_serial_release_port(struct uart_port *port)
774 {
775 }
776
777 /*
778 * Request the memory region(s) being used by 'port'.
779 */
780 static int bfin_serial_request_port(struct uart_port *port)
781 {
782 return 0;
783 }
784
785 /*
786 * Configure/autoconfigure the port.
787 */
788 static void bfin_serial_config_port(struct uart_port *port, int flags)
789 {
790 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
791
792 if (flags & UART_CONFIG_TYPE &&
793 bfin_serial_request_port(&uart->port) == 0)
794 uart->port.type = PORT_BFIN;
795 }
796
797 /*
798 * Verify the new serial_struct (for TIOCSSERIAL).
799 * The only change we allow are to the flags and type, and
800 * even then only between PORT_BFIN and PORT_UNKNOWN
801 */
802 static int
803 bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
804 {
805 return 0;
806 }
807
808 /*
809 * Enable the IrDA function if tty->ldisc.num is N_IRDA.
810 * In other cases, disable IrDA function.
811 */
812 static void bfin_serial_set_ldisc(struct uart_port *port)
813 {
814 int line = port->line;
815 unsigned short val;
816
817 if (line >= port->info->port.tty->driver->num)
818 return;
819
820 switch (port->info->port.tty->termios->c_line) {
821 case N_IRDA:
822 val = UART_GET_GCTL(&bfin_serial_ports[line]);
823 val |= (IREN | RPOLC);
824 UART_PUT_GCTL(&bfin_serial_ports[line], val);
825 break;
826 default:
827 val = UART_GET_GCTL(&bfin_serial_ports[line]);
828 val &= ~(IREN | RPOLC);
829 UART_PUT_GCTL(&bfin_serial_ports[line], val);
830 }
831 }
832
833 static struct uart_ops bfin_serial_pops = {
834 .tx_empty = bfin_serial_tx_empty,
835 .set_mctrl = bfin_serial_set_mctrl,
836 .get_mctrl = bfin_serial_get_mctrl,
837 .stop_tx = bfin_serial_stop_tx,
838 .start_tx = bfin_serial_start_tx,
839 .stop_rx = bfin_serial_stop_rx,
840 .enable_ms = bfin_serial_enable_ms,
841 .break_ctl = bfin_serial_break_ctl,
842 .startup = bfin_serial_startup,
843 .shutdown = bfin_serial_shutdown,
844 .set_termios = bfin_serial_set_termios,
845 .set_ldisc = bfin_serial_set_ldisc,
846 .type = bfin_serial_type,
847 .release_port = bfin_serial_release_port,
848 .request_port = bfin_serial_request_port,
849 .config_port = bfin_serial_config_port,
850 .verify_port = bfin_serial_verify_port,
851 };
852
853 static void __init bfin_serial_init_ports(void)
854 {
855 static int first = 1;
856 int i;
857
858 if (!first)
859 return;
860 first = 0;
861
862 for (i = 0; i < nr_ports; i++) {
863 bfin_serial_ports[i].port.uartclk = get_sclk();
864 bfin_serial_ports[i].port.ops = &bfin_serial_pops;
865 bfin_serial_ports[i].port.line = i;
866 bfin_serial_ports[i].port.iotype = UPIO_MEM;
867 bfin_serial_ports[i].port.membase =
868 (void __iomem *)bfin_serial_resource[i].uart_base_addr;
869 bfin_serial_ports[i].port.mapbase =
870 bfin_serial_resource[i].uart_base_addr;
871 bfin_serial_ports[i].port.irq =
872 bfin_serial_resource[i].uart_irq;
873 bfin_serial_ports[i].port.flags = UPF_BOOT_AUTOCONF;
874 #ifdef CONFIG_SERIAL_BFIN_DMA
875 bfin_serial_ports[i].tx_done = 1;
876 bfin_serial_ports[i].tx_count = 0;
877 bfin_serial_ports[i].tx_dma_channel =
878 bfin_serial_resource[i].uart_tx_dma_channel;
879 bfin_serial_ports[i].rx_dma_channel =
880 bfin_serial_resource[i].uart_rx_dma_channel;
881 init_timer(&(bfin_serial_ports[i].rx_dma_timer));
882 #endif
883 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
884 init_timer(&(bfin_serial_ports[i].cts_timer));
885 bfin_serial_ports[i].cts_pin =
886 bfin_serial_resource[i].uart_cts_pin;
887 bfin_serial_ports[i].rts_pin =
888 bfin_serial_resource[i].uart_rts_pin;
889 #endif
890 bfin_serial_hw_init(&bfin_serial_ports[i]);
891 }
892
893 }
894
895 #ifdef CONFIG_SERIAL_BFIN_CONSOLE
896 /*
897 * If the port was already initialised (eg, by a boot loader),
898 * try to determine the current setup.
899 */
900 static void __init
901 bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
902 int *parity, int *bits)
903 {
904 unsigned short status;
905
906 status = UART_GET_IER(uart) & (ERBFI | ETBEI);
907 if (status == (ERBFI | ETBEI)) {
908 /* ok, the port was enabled */
909 u16 lcr, dlh, dll;
910
911 lcr = UART_GET_LCR(uart);
912
913 *parity = 'n';
914 if (lcr & PEN) {
915 if (lcr & EPS)
916 *parity = 'e';
917 else
918 *parity = 'o';
919 }
920 switch (lcr & 0x03) {
921 case 0: *bits = 5; break;
922 case 1: *bits = 6; break;
923 case 2: *bits = 7; break;
924 case 3: *bits = 8; break;
925 }
926 /* Set DLAB in LCR to Access DLL and DLH */
927 UART_SET_DLAB(uart);
928
929 dll = UART_GET_DLL(uart);
930 dlh = UART_GET_DLH(uart);
931
932 /* Clear DLAB in LCR to Access THR RBR IER */
933 UART_CLEAR_DLAB(uart);
934
935 *baud = get_sclk() / (16*(dll | dlh << 8));
936 }
937 pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits);
938 }
939 #endif
940
941 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
942 static struct uart_driver bfin_serial_reg;
943
944 static int __init
945 bfin_serial_console_setup(struct console *co, char *options)
946 {
947 struct bfin_serial_port *uart;
948 # ifdef CONFIG_SERIAL_BFIN_CONSOLE
949 int baud = 57600;
950 int bits = 8;
951 int parity = 'n';
952 # ifdef CONFIG_SERIAL_BFIN_CTSRTS
953 int flow = 'r';
954 # else
955 int flow = 'n';
956 # endif
957 # endif
958
959 /*
960 * Check whether an invalid uart number has been specified, and
961 * if so, search for the first available port that does have
962 * console support.
963 */
964 if (co->index == -1 || co->index >= nr_ports)
965 co->index = 0;
966 uart = &bfin_serial_ports[co->index];
967
968 # ifdef CONFIG_SERIAL_BFIN_CONSOLE
969 if (options)
970 uart_parse_options(options, &baud, &parity, &bits, &flow);
971 else
972 bfin_serial_console_get_options(uart, &baud, &parity, &bits);
973
974 return uart_set_options(&uart->port, co, baud, parity, bits, flow);
975 # else
976 return 0;
977 # endif
978 }
979 #endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) ||
980 defined (CONFIG_EARLY_PRINTK) */
981
982 #ifdef CONFIG_SERIAL_BFIN_CONSOLE
983 static void bfin_serial_console_putchar(struct uart_port *port, int ch)
984 {
985 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
986 while (!(UART_GET_LSR(uart) & THRE))
987 barrier();
988 UART_PUT_CHAR(uart, ch);
989 SSYNC();
990 }
991
992 /*
993 * Interrupts are disabled on entering
994 */
995 static void
996 bfin_serial_console_write(struct console *co, const char *s, unsigned int count)
997 {
998 struct bfin_serial_port *uart = &bfin_serial_ports[co->index];
999 int flags = 0;
1000
1001 spin_lock_irqsave(&uart->port.lock, flags);
1002 uart_console_write(&uart->port, s, count, bfin_serial_console_putchar);
1003 spin_unlock_irqrestore(&uart->port.lock, flags);
1004
1005 }
1006
1007 static struct console bfin_serial_console = {
1008 .name = BFIN_SERIAL_NAME,
1009 .write = bfin_serial_console_write,
1010 .device = uart_console_device,
1011 .setup = bfin_serial_console_setup,
1012 .flags = CON_PRINTBUFFER,
1013 .index = -1,
1014 .data = &bfin_serial_reg,
1015 };
1016
1017 static int __init bfin_serial_rs_console_init(void)
1018 {
1019 bfin_serial_init_ports();
1020 register_console(&bfin_serial_console);
1021 #ifdef CONFIG_KGDB_UART
1022 kgdb_entry_state = 0;
1023 init_kgdb_uart();
1024 #endif
1025 return 0;
1026 }
1027 console_initcall(bfin_serial_rs_console_init);
1028
1029 #define BFIN_SERIAL_CONSOLE &bfin_serial_console
1030 #else
1031 #define BFIN_SERIAL_CONSOLE NULL
1032 #endif /* CONFIG_SERIAL_BFIN_CONSOLE */
1033
1034
1035 #ifdef CONFIG_EARLY_PRINTK
1036 static __init void early_serial_putc(struct uart_port *port, int ch)
1037 {
1038 unsigned timeout = 0xffff;
1039 struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
1040
1041 while ((!(UART_GET_LSR(uart) & THRE)) && --timeout)
1042 cpu_relax();
1043 UART_PUT_CHAR(uart, ch);
1044 }
1045
1046 static __init void early_serial_write(struct console *con, const char *s,
1047 unsigned int n)
1048 {
1049 struct bfin_serial_port *uart = &bfin_serial_ports[con->index];
1050 unsigned int i;
1051
1052 for (i = 0; i < n; i++, s++) {
1053 if (*s == '\n')
1054 early_serial_putc(&uart->port, '\r');
1055 early_serial_putc(&uart->port, *s);
1056 }
1057 }
1058
1059 static struct __init console bfin_early_serial_console = {
1060 .name = "early_BFuart",
1061 .write = early_serial_write,
1062 .device = uart_console_device,
1063 .flags = CON_PRINTBUFFER,
1064 .setup = bfin_serial_console_setup,
1065 .index = -1,
1066 .data = &bfin_serial_reg,
1067 };
1068
1069 struct console __init *bfin_earlyserial_init(unsigned int port,
1070 unsigned int cflag)
1071 {
1072 struct bfin_serial_port *uart;
1073 struct ktermios t;
1074
1075 if (port == -1 || port >= nr_ports)
1076 port = 0;
1077 bfin_serial_init_ports();
1078 bfin_early_serial_console.index = port;
1079 uart = &bfin_serial_ports[port];
1080 t.c_cflag = cflag;
1081 t.c_iflag = 0;
1082 t.c_oflag = 0;
1083 t.c_lflag = ICANON;
1084 t.c_line = port;
1085 bfin_serial_set_termios(&uart->port, &t, &t);
1086 return &bfin_early_serial_console;
1087 }
1088
1089 #endif /* CONFIG_SERIAL_BFIN_CONSOLE */
1090
1091 static struct uart_driver bfin_serial_reg = {
1092 .owner = THIS_MODULE,
1093 .driver_name = "bfin-uart",
1094 .dev_name = BFIN_SERIAL_NAME,
1095 .major = BFIN_SERIAL_MAJOR,
1096 .minor = BFIN_SERIAL_MINOR,
1097 .nr = BFIN_UART_NR_PORTS,
1098 .cons = BFIN_SERIAL_CONSOLE,
1099 };
1100
1101 static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state)
1102 {
1103 struct bfin_serial_port *uart = platform_get_drvdata(dev);
1104
1105 if (uart)
1106 uart_suspend_port(&bfin_serial_reg, &uart->port);
1107
1108 return 0;
1109 }
1110
1111 static int bfin_serial_resume(struct platform_device *dev)
1112 {
1113 struct bfin_serial_port *uart = platform_get_drvdata(dev);
1114
1115 if (uart)
1116 uart_resume_port(&bfin_serial_reg, &uart->port);
1117
1118 return 0;
1119 }
1120
1121 static int bfin_serial_probe(struct platform_device *dev)
1122 {
1123 struct resource *res = dev->resource;
1124 int i;
1125
1126 for (i = 0; i < dev->num_resources; i++, res++)
1127 if (res->flags & IORESOURCE_MEM)
1128 break;
1129
1130 if (i < dev->num_resources) {
1131 for (i = 0; i < nr_ports; i++, res++) {
1132 if (bfin_serial_ports[i].port.mapbase != res->start)
1133 continue;
1134 bfin_serial_ports[i].port.dev = &dev->dev;
1135 uart_add_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
1136 platform_set_drvdata(dev, &bfin_serial_ports[i]);
1137 }
1138 }
1139
1140 return 0;
1141 }
1142
1143 static int bfin_serial_remove(struct platform_device *pdev)
1144 {
1145 struct bfin_serial_port *uart = platform_get_drvdata(pdev);
1146
1147
1148 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
1149 gpio_free(uart->cts_pin);
1150 gpio_free(uart->rts_pin);
1151 #endif
1152
1153 platform_set_drvdata(pdev, NULL);
1154
1155 if (uart)
1156 uart_remove_one_port(&bfin_serial_reg, &uart->port);
1157
1158 return 0;
1159 }
1160
1161 static struct platform_driver bfin_serial_driver = {
1162 .probe = bfin_serial_probe,
1163 .remove = bfin_serial_remove,
1164 .suspend = bfin_serial_suspend,
1165 .resume = bfin_serial_resume,
1166 .driver = {
1167 .name = "bfin-uart",
1168 .owner = THIS_MODULE,
1169 },
1170 };
1171
1172 static int __init bfin_serial_init(void)
1173 {
1174 int ret;
1175 #ifdef CONFIG_KGDB_UART
1176 struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
1177 struct ktermios t;
1178 #endif
1179
1180 pr_info("Serial: Blackfin serial driver\n");
1181
1182 bfin_serial_init_ports();
1183
1184 ret = uart_register_driver(&bfin_serial_reg);
1185 if (ret == 0) {
1186 ret = platform_driver_register(&bfin_serial_driver);
1187 if (ret) {
1188 pr_debug("uart register failed\n");
1189 uart_unregister_driver(&bfin_serial_reg);
1190 }
1191 }
1192 #ifdef CONFIG_KGDB_UART
1193 if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) {
1194 request_irq(uart->port.irq, bfin_serial_rx_int,
1195 IRQF_DISABLED, "BFIN_UART_RX", uart);
1196 pr_info("Request irq for kgdb uart port\n");
1197 UART_SET_IER(uart, ERBFI);
1198 SSYNC();
1199 t.c_cflag = CS8|B57600;
1200 t.c_iflag = 0;
1201 t.c_oflag = 0;
1202 t.c_lflag = ICANON;
1203 t.c_line = CONFIG_KGDB_UART_PORT;
1204 bfin_serial_set_termios(&uart->port, &t, &t);
1205 }
1206 #endif
1207 return ret;
1208 }
1209
1210 static void __exit bfin_serial_exit(void)
1211 {
1212 platform_driver_unregister(&bfin_serial_driver);
1213 uart_unregister_driver(&bfin_serial_reg);
1214 }
1215
1216 module_init(bfin_serial_init);
1217 module_exit(bfin_serial_exit);
1218
1219 MODULE_AUTHOR("Aubrey.Li <aubrey.li@analog.com>");
1220 MODULE_DESCRIPTION("Blackfin generic serial port driver");
1221 MODULE_LICENSE("GPL");
1222 MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR);
1223 MODULE_ALIAS("platform:bfin-uart");
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree