arch/arm/mach-pxa/include/mach/pxa-regs.h

   1 /*
   2  *  arch/arm/mach-pxa/include/mach/pxa-regs.h
   3  *
   4  *  Author:     Nicolas Pitre
   5  *  Created:    Jun 15, 2001
   6  *  Copyright:  MontaVista Software Inc.
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12
  13 #ifndef __PXA_REGS_H
  14 #define __PXA_REGS_H
  15
  16
  17 /*
  18  * PXA Chip selects
  19  */
  20
  21 #define PXA_CS0_PHYS    0x00000000
  22 #define PXA_CS1_PHYS    0x04000000
  23 #define PXA_CS2_PHYS    0x08000000
  24 #define PXA_CS3_PHYS    0x0C000000
  25 #define PXA_CS4_PHYS    0x10000000
  26 #define PXA_CS5_PHYS    0x14000000
  27
  28
  29 /*
  30  * Personal Computer Memory Card International Association (PCMCIA) sockets
  31  */
  32
  33 #define PCMCIAPrtSp     0x04000000      /* PCMCIA Partition Space [byte]   */
  34 #define PCMCIASp        (4*PCMCIAPrtSp) /* PCMCIA Space [byte]             */
  35 #define PCMCIAIOSp      PCMCIAPrtSp     /* PCMCIA I/O Space [byte]         */
  36 #define PCMCIAAttrSp    PCMCIAPrtSp     /* PCMCIA Attribute Space [byte]   */
  37 #define PCMCIAMemSp     PCMCIAPrtSp     /* PCMCIA Memory Space [byte]      */
  38
  39 #define PCMCIA0Sp       PCMCIASp        /* PCMCIA 0 Space [byte]           */
  40 #define PCMCIA0IOSp     PCMCIAIOSp      /* PCMCIA 0 I/O Space [byte]       */
  41 #define PCMCIA0AttrSp   PCMCIAAttrSp    /* PCMCIA 0 Attribute Space [byte] */
  42 #define PCMCIA0MemSp    PCMCIAMemSp     /* PCMCIA 0 Memory Space [byte]    */
  43
  44 #define PCMCIA1Sp       PCMCIASp        /* PCMCIA 1 Space [byte]           */
  45 #define PCMCIA1IOSp     PCMCIAIOSp      /* PCMCIA 1 I/O Space [byte]       */
  46 #define PCMCIA1AttrSp   PCMCIAAttrSp    /* PCMCIA 1 Attribute Space [byte] */
  47 #define PCMCIA1MemSp    PCMCIAMemSp     /* PCMCIA 1 Memory Space [byte]    */
  48
  49 #define _PCMCIA(Nb)                     /* PCMCIA [0..1]                   */ \
  50                         (0x20000000 + (Nb)*PCMCIASp)
  51 #define _PCMCIAIO(Nb)   _PCMCIA (Nb)    /* PCMCIA I/O [0..1]               */
  52 #define _PCMCIAAttr(Nb)                 /* PCMCIA Attribute [0..1]         */ \
  53                         (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
  54 #define _PCMCIAMem(Nb)                  /* PCMCIA Memory [0..1]            */ \
  55                         (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
  56
  57 #define _PCMCIA0        _PCMCIA (0)     /* PCMCIA 0                        */
  58 #define _PCMCIA0IO      _PCMCIAIO (0)   /* PCMCIA 0 I/O                    */
  59 #define _PCMCIA0Attr    _PCMCIAAttr (0) /* PCMCIA 0 Attribute              */
  60 #define _PCMCIA0Mem     _PCMCIAMem (0)  /* PCMCIA 0 Memory                 */
  61
  62 #define _PCMCIA1        _PCMCIA (1)     /* PCMCIA 1                        */
  63 #define _PCMCIA1IO      _PCMCIAIO (1)   /* PCMCIA 1 I/O                    */
  64 #define _PCMCIA1Attr    _PCMCIAAttr (1) /* PCMCIA 1 Attribute              */
  65 #define _PCMCIA1Mem     _PCMCIAMem (1)  /* PCMCIA 1 Memory                 */
  66
  67
  68
  69 /*
  70  * DMA Controller
  71  */
  72 #define DCSR(x)         __REG2(0x40000000, (x) << 2)
  73
  74 #define DCSR_RUN        (1 << 31)       /* Run Bit (read / write) */
  75 #define DCSR_NODESC     (1 << 30)       /* No-Descriptor Fetch (read / write) */
  76 #define DCSR_STOPIRQEN  (1 << 29)       /* Stop Interrupt Enable (read / write) */
  77 #define DCSR_REQPEND    (1 << 8)        /* Request Pending (read-only) */
  78 #define DCSR_STOPSTATE  (1 << 3)        /* Stop State (read-only) */
  79 #define DCSR_ENDINTR    (1 << 2)        /* End Interrupt (read / write) */
  80 #define DCSR_STARTINTR  (1 << 1)        /* Start Interrupt (read / write) */
  81 #define DCSR_BUSERR     (1 << 0)        /* Bus Error Interrupt (read / write) */
  82
  83 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
  84 #define DCSR_EORIRQEN   (1 << 28)       /* End of Receive Interrupt Enable (R/W) */
  85 #define DCSR_EORJMPEN   (1 << 27)       /* Jump to next descriptor on EOR */
  86 #define DCSR_EORSTOPEN  (1 << 26)       /* STOP on an EOR */
  87 #define DCSR_SETCMPST   (1 << 25)       /* Set Descriptor Compare Status */
  88 #define DCSR_CLRCMPST   (1 << 24)       /* Clear Descriptor Compare Status */
  89 #define DCSR_CMPST      (1 << 10)       /* The Descriptor Compare Status */
  90 #define DCSR_EORINTR    (1 << 9)        /* The end of Receive */
  91 #endif
  92
  93 #define DALGN           __REG(0x400000a0)  /* DMA Alignment Register */
  94 #define DINT            __REG(0x400000f0)  /* DMA Interrupt Register */
  95
  96 #define DRCMR(n)        (*(((n) < 64) ? \
  97                         &__REG2(0x40000100, ((n) & 0x3f) << 2) : \
  98                         &__REG2(0x40001100, ((n) & 0x3f) << 2)))
  99
 100 #define DRCMR_MAPVLD    (1 << 7)        /* Map Valid (read / write) */
 101 #define DRCMR_CHLNUM    0x1f            /* mask for Channel Number (read / write) */
 102
 103 #define DDADR(x)        __REG2(0x40000200, (x) << 4)
 104 #define DSADR(x)        __REG2(0x40000204, (x) << 4)
 105 #define DTADR(x)        __REG2(0x40000208, (x) << 4)
 106 #define DCMD(x)         __REG2(0x4000020c, (x) << 4)
 107
 108 #define DDADR_DESCADDR  0xfffffff0      /* Address of next descriptor (mask) */
 109 #define DDADR_STOP      (1 << 0)        /* Stop (read / write) */
 110
 111 #define DCMD_INCSRCADDR (1 << 31)       /* Source Address Increment Setting. */
 112 #define DCMD_INCTRGADDR (1 << 30)       /* Target Address Increment Setting. */
 113 #define DCMD_FLOWSRC    (1 << 29)       /* Flow Control by the source. */
 114 #define DCMD_FLOWTRG    (1 << 28)       /* Flow Control by the target. */
 115 #define DCMD_STARTIRQEN (1 << 22)       /* Start Interrupt Enable */
 116 #define DCMD_ENDIRQEN   (1 << 21)       /* End Interrupt Enable */
 117 #define DCMD_ENDIAN     (1 << 18)       /* Device Endian-ness. */
 118 #define DCMD_BURST8     (1 << 16)       /* 8 byte burst */
 119 #define DCMD_BURST16    (2 << 16)       /* 16 byte burst */
 120 #define DCMD_BURST32    (3 << 16)       /* 32 byte burst */
 121 #define DCMD_WIDTH1     (1 << 14)       /* 1 byte width */
 122 #define DCMD_WIDTH2     (2 << 14)       /* 2 byte width (HalfWord) */
 123 #define DCMD_WIDTH4     (3 << 14)       /* 4 byte width (Word) */
 124 #define DCMD_LENGTH     0x01fff         /* length mask (max = 8K - 1) */
 125
 126
 127 /*
 128  * UARTs
 129  */
 130
 131 /* Full Function UART (FFUART) */
 132 #define FFUART          FFRBR
 133 #define FFRBR           __REG(0x40100000)  /* Receive Buffer Register (read only) */
 134 #define FFTHR           __REG(0x40100000)  /* Transmit Holding Register (write only) */
 135 #define FFIER           __REG(0x40100004)  /* Interrupt Enable Register (read/write) */
 136 #define FFIIR           __REG(0x40100008)  /* Interrupt ID Register (read only) */
 137 #define FFFCR           __REG(0x40100008)  /* FIFO Control Register (write only) */
 138 #define FFLCR           __REG(0x4010000C)  /* Line Control Register (read/write) */
 139 #define FFMCR           __REG(0x40100010)  /* Modem Control Register (read/write) */
 140 #define FFLSR           __REG(0x40100014)  /* Line Status Register (read only) */
 141 #define FFMSR           __REG(0x40100018)  /* Modem Status Register (read only) */
 142 #define FFSPR           __REG(0x4010001C)  /* Scratch Pad Register (read/write) */
 143 #define FFISR           __REG(0x40100020)  /* Infrared Selection Register (read/write) */
 144 #define FFDLL           __REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
 145 #define FFDLH           __REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
 146
 147 /* Bluetooth UART (BTUART) */
 148 #define BTUART          BTRBR
 149 #define BTRBR           __REG(0x40200000)  /* Receive Buffer Register (read only) */
 150 #define BTTHR           __REG(0x40200000)  /* Transmit Holding Register (write only) */
 151 #define BTIER           __REG(0x40200004)  /* Interrupt Enable Register (read/write) */
 152 #define BTIIR           __REG(0x40200008)  /* Interrupt ID Register (read only) */
 153 #define BTFCR           __REG(0x40200008)  /* FIFO Control Register (write only) */
 154 #define BTLCR           __REG(0x4020000C)  /* Line Control Register (read/write) */
 155 #define BTMCR           __REG(0x40200010)  /* Modem Control Register (read/write) */
 156 #define BTLSR           __REG(0x40200014)  /* Line Status Register (read only) */
 157 #define BTMSR           __REG(0x40200018)  /* Modem Status Register (read only) */
 158 #define BTSPR           __REG(0x4020001C)  /* Scratch Pad Register (read/write) */
 159 #define BTISR           __REG(0x40200020)  /* Infrared Selection Register (read/write) */
 160 #define BTDLL           __REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
 161 #define BTDLH           __REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
 162
 163 /* Standard UART (STUART) */
 164 #define STUART          STRBR
 165 #define STRBR           __REG(0x40700000)  /* Receive Buffer Register (read only) */
 166 #define STTHR           __REG(0x40700000)  /* Transmit Holding Register (write only) */
 167 #define STIER           __REG(0x40700004)  /* Interrupt Enable Register (read/write) */
 168 #define STIIR           __REG(0x40700008)  /* Interrupt ID Register (read only) */
 169 #define STFCR           __REG(0x40700008)  /* FIFO Control Register (write only) */
 170 #define STLCR           __REG(0x4070000C)  /* Line Control Register (read/write) */
 171 #define STMCR           __REG(0x40700010)  /* Modem Control Register (read/write) */
 172 #define STLSR           __REG(0x40700014)  /* Line Status Register (read only) */
 173 #define STMSR           __REG(0x40700018)  /* Reserved */
 174 #define STSPR           __REG(0x4070001C)  /* Scratch Pad Register (read/write) */
 175 #define STISR           __REG(0x40700020)  /* Infrared Selection Register (read/write) */
 176 #define STDLL           __REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
 177 #define STDLH           __REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
 178
 179 /* Hardware UART (HWUART) */
 180 #define HWUART          HWRBR
 181 #define HWRBR           __REG(0x41600000)  /* Receive Buffer Register (read only) */
 182 #define HWTHR           __REG(0x41600000)  /* Transmit Holding Register (write only) */
 183 #define HWIER           __REG(0x41600004)  /* Interrupt Enable Register (read/write) */
 184 #define HWIIR           __REG(0x41600008)  /* Interrupt ID Register (read only) */
 185 #define HWFCR           __REG(0x41600008)  /* FIFO Control Register (write only) */
 186 #define HWLCR           __REG(0x4160000C)  /* Line Control Register (read/write) */
 187 #define HWMCR           __REG(0x41600010)  /* Modem Control Register (read/write) */
 188 #define HWLSR           __REG(0x41600014)  /* Line Status Register (read only) */
 189 #define HWMSR           __REG(0x41600018)  /* Modem Status Register (read only) */
 190 #define HWSPR           __REG(0x4160001C)  /* Scratch Pad Register (read/write) */
 191 #define HWISR           __REG(0x41600020)  /* Infrared Selection Register (read/write) */
 192 #define HWFOR           __REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
 193 #define HWABR           __REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
 194 #define HWACR           __REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
 195 #define HWDLL           __REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
 196 #define HWDLH           __REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
 197
 198 #define IER_DMAE        (1 << 7)        /* DMA Requests Enable */
 199 #define IER_UUE         (1 << 6)        /* UART Unit Enable */
 200 #define IER_NRZE        (1 << 5)        /* NRZ coding Enable */
 201 #define IER_RTIOE       (1 << 4)        /* Receiver Time Out Interrupt Enable */
 202 #define IER_MIE         (1 << 3)        /* Modem Interrupt Enable */
 203 #define IER_RLSE        (1 << 2)        /* Receiver Line Status Interrupt Enable */
 204 #define IER_TIE         (1 << 1)        /* Transmit Data request Interrupt Enable */
 205 #define IER_RAVIE       (1 << 0)        /* Receiver Data Available Interrupt Enable */
 206
 207 #define IIR_FIFOES1     (1 << 7)        /* FIFO Mode Enable Status */
 208 #define IIR_FIFOES0     (1 << 6)        /* FIFO Mode Enable Status */
 209 #define IIR_TOD         (1 << 3)        /* Time Out Detected */
 210 #define IIR_IID2        (1 << 2)        /* Interrupt Source Encoded */
 211 #define IIR_IID1        (1 << 1)        /* Interrupt Source Encoded */
 212 #define IIR_IP          (1 << 0)        /* Interrupt Pending (active low) */
 213
 214 #define FCR_ITL2        (1 << 7)        /* Interrupt Trigger Level */
 215 #define FCR_ITL1        (1 << 6)        /* Interrupt Trigger Level */
 216 #define FCR_RESETTF     (1 << 2)        /* Reset Transmitter FIFO */
 217 #define FCR_RESETRF     (1 << 1)        /* Reset Receiver FIFO */
 218 #define FCR_TRFIFOE     (1 << 0)        /* Transmit and Receive FIFO Enable */
 219 #define FCR_ITL_1       (0)
 220 #define FCR_ITL_8       (FCR_ITL1)
 221 #define FCR_ITL_16      (FCR_ITL2)
 222 #define FCR_ITL_32      (FCR_ITL2|FCR_ITL1)
 223
 224 #define LCR_DLAB        (1 << 7)        /* Divisor Latch Access Bit */
 225 #define LCR_SB          (1 << 6)        /* Set Break */
 226 #define LCR_STKYP       (1 << 5)        /* Sticky Parity */
 227 #define LCR_EPS         (1 << 4)        /* Even Parity Select */
 228 #define LCR_PEN         (1 << 3)        /* Parity Enable */
 229 #define LCR_STB         (1 << 2)        /* Stop Bit */
 230 #define LCR_WLS1        (1 << 1)        /* Word Length Select */
 231 #define LCR_WLS0        (1 << 0)        /* Word Length Select */
 232
 233 #define LSR_FIFOE       (1 << 7)        /* FIFO Error Status */
 234 #define LSR_TEMT        (1 << 6)        /* Transmitter Empty */
 235 #define LSR_TDRQ        (1 << 5)        /* Transmit Data Request */
 236 #define LSR_BI          (1 << 4)        /* Break Interrupt */
 237 #define LSR_FE          (1 << 3)        /* Framing Error */
 238 #define LSR_PE          (1 << 2)        /* Parity Error */
 239 #define LSR_OE          (1 << 1)        /* Overrun Error */
 240 #define LSR_DR          (1 << 0)        /* Data Ready */
 241
 242 #define MCR_LOOP        (1 << 4)
 243 #define MCR_OUT2        (1 << 3)        /* force MSR_DCD in loopback mode */
 244 #define MCR_OUT1        (1 << 2)        /* force MSR_RI in loopback mode */
 245 #define MCR_RTS         (1 << 1)        /* Request to Send */
 246 #define MCR_DTR         (1 << 0)        /* Data Terminal Ready */
 247
 248 #define MSR_DCD         (1 << 7)        /* Data Carrier Detect */
 249 #define MSR_RI          (1 << 6)        /* Ring Indicator */
 250 #define MSR_DSR         (1 << 5)        /* Data Set Ready */
 251 #define MSR_CTS         (1 << 4)        /* Clear To Send */
 252 #define MSR_DDCD        (1 << 3)        /* Delta Data Carrier Detect */
 253 #define MSR_TERI        (1 << 2)        /* Trailing Edge Ring Indicator */
 254 #define MSR_DDSR        (1 << 1)        /* Delta Data Set Ready */
 255 #define MSR_DCTS        (1 << 0)        /* Delta Clear To Send */
 256
 257 /*
 258  * IrSR (Infrared Selection Register)
 259  */
 260 #define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
 261 #define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
 262 #define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
 263 #define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
 264 #define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
 265
 266
 267 /*
 268  * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
 269  */
 270
 271 /*
 272  * Serial Audio Controller
 273  */
 274
 275 #define SACR0           __REG(0x40400000)  /* Global Control Register */
 276 #define SACR1           __REG(0x40400004)  /* Serial Audio I 2 S/MSB-Justified Control Register */
 277 #define SASR0           __REG(0x4040000C)  /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
 278 #define SAIMR           __REG(0x40400014)  /* Serial Audio Interrupt Mask Register */
 279 #define SAICR           __REG(0x40400018)  /* Serial Audio Interrupt Clear Register */
 280 #define SADIV           __REG(0x40400060)  /* Audio Clock Divider Register. */
 281 #define SADR            __REG(0x40400080)  /* Serial Audio Data Register (TX and RX FIFO access Register). */
 282
 283 #define SACR0_RFTH(x)   ((x) << 12)     /* Rx FIFO Interrupt or DMA Trigger Threshold */
 284 #define SACR0_TFTH(x)   ((x) << 8)      /* Tx FIFO Interrupt or DMA Trigger Threshold */
 285 #define SACR0_STRF      (1 << 5)        /* FIFO Select for EFWR Special Function */
 286 #define SACR0_EFWR      (1 << 4)        /* Enable EFWR Function  */
 287 #define SACR0_RST       (1 << 3)        /* FIFO, i2s Register Reset */
 288 #define SACR0_BCKD      (1 << 2)        /* Bit Clock Direction */
 289 #define SACR0_ENB       (1 << 0)        /* Enable I2S Link */
 290 #define SACR1_ENLBF     (1 << 5)        /* Enable Loopback */
 291 #define SACR1_DRPL      (1 << 4)        /* Disable Replaying Function */
 292 #define SACR1_DREC      (1 << 3)        /* Disable Recording Function */
 293 #define SACR1_AMSL      (1 << 0)        /* Specify Alternate Mode */
 294
 295 #define SASR0_I2SOFF    (1 << 7)        /* Controller Status */
 296 #define SASR0_ROR       (1 << 6)        /* Rx FIFO Overrun */
 297 #define SASR0_TUR       (1 << 5)        /* Tx FIFO Underrun */
 298 #define SASR0_RFS       (1 << 4)        /* Rx FIFO Service Request */
 299 #define SASR0_TFS       (1 << 3)        /* Tx FIFO Service Request */
 300 #define SASR0_BSY       (1 << 2)        /* I2S Busy */
 301 #define SASR0_RNE       (1 << 1)        /* Rx FIFO Not Empty */
 302 #define SASR0_TNF       (1 << 0)        /* Tx FIFO Not Empty */
 303
 304 #define SAICR_ROR       (1 << 6)        /* Clear Rx FIFO Overrun Interrupt */
 305 #define SAICR_TUR       (1 << 5)        /* Clear Tx FIFO Underrun Interrupt */
 306
 307 #define SAIMR_ROR       (1 << 6)        /* Enable Rx FIFO Overrun Condition Interrupt */
 308 #define SAIMR_TUR       (1 << 5)        /* Enable Tx FIFO Underrun Condition Interrupt */
 309 #define SAIMR_RFS       (1 << 4)        /* Enable Rx FIFO Service Interrupt */
 310 #define SAIMR_TFS       (1 << 3)        /* Enable Tx FIFO Service Interrupt */
 311
 312 /*
 313  * AC97 Controller registers
 314  */
 315
 316 #define POCR            __REG(0x40500000)  /* PCM Out Control Register */
 317 #define POCR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */
 318 #define POCR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */
 319
 320 #define PICR            __REG(0x40500004)  /* PCM In Control Register */
 321 #define PICR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */
 322 #define PICR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */
 323
 324 #define MCCR            __REG(0x40500008)  /* Mic In Control Register */
 325 #define MCCR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */
 326 #define MCCR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */
 327
 328 #define GCR             __REG(0x4050000C)  /* Global Control Register */
 329 #ifdef CONFIG_PXA3xx
 330 #define GCR_CLKBPB      (1 << 31)       /* Internal clock enable */
 331 #endif
 332 #define GCR_nDMAEN      (1 << 24)       /* non DMA Enable */
 333 #define GCR_CDONE_IE    (1 << 19)       /* Command Done Interrupt Enable */
 334 #define GCR_SDONE_IE    (1 << 18)       /* Status Done Interrupt Enable */
 335 #define GCR_SECRDY_IEN  (1 << 9)        /* Secondary Ready Interrupt Enable */
 336 #define GCR_PRIRDY_IEN  (1 << 8)        /* Primary Ready Interrupt Enable */
 337 #define GCR_SECRES_IEN  (1 << 5)        /* Secondary Resume Interrupt Enable */
 338 #define GCR_PRIRES_IEN  (1 << 4)        /* Primary Resume Interrupt Enable */
 339 #define GCR_ACLINK_OFF  (1 << 3)        /* AC-link Shut Off */
 340 #define GCR_WARM_RST    (1 << 2)        /* AC97 Warm Reset */
 341 #define GCR_COLD_RST    (1 << 1)        /* AC'97 Cold Reset (0 = active) */
 342 #define GCR_GIE         (1 << 0)        /* Codec GPI Interrupt Enable */
 343
 344 #define POSR            __REG(0x40500010)  /* PCM Out Status Register */
 345 #define POSR_FIFOE      (1 << 4)        /* FIFO error */
 346 #define POSR_FSR        (1 << 2)        /* FIFO Service Request */
 347
 348 #define PISR            __REG(0x40500014)  /* PCM In Status Register */
 349 #define PISR_FIFOE      (1 << 4)        /* FIFO error */
 350 #define PISR_EOC        (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
 351 #define PISR_FSR        (1 << 2)        /* FIFO Service Request */
 352
 353 #define MCSR            __REG(0x40500018)  /* Mic In Status Register */
 354 #define MCSR_FIFOE      (1 << 4)        /* FIFO error */
 355 #define MCSR_EOC        (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
 356 #define MCSR_FSR        (1 << 2)        /* FIFO Service Request */
 357
 358 #define GSR             __REG(0x4050001C)  /* Global Status Register */
 359 #define GSR_CDONE       (1 << 19)       /* Command Done */
 360 #define GSR_SDONE       (1 << 18)       /* Status Done */
 361 #define GSR_RDCS        (1 << 15)       /* Read Completion Status */
 362 #define GSR_BIT3SLT12   (1 << 14)       /* Bit 3 of slot 12 */
 363 #define GSR_BIT2SLT12   (1 << 13)       /* Bit 2 of slot 12 */
 364 #define GSR_BIT1SLT12   (1 << 12)       /* Bit 1 of slot 12 */
 365 #define GSR_SECRES      (1 << 11)       /* Secondary Resume Interrupt */
 366 #define GSR_PRIRES      (1 << 10)       /* Primary Resume Interrupt */
 367 #define GSR_SCR         (1 << 9)        /* Secondary Codec Ready */
 368 #define GSR_PCR         (1 << 8)        /*  Primary Codec Ready */
 369 #define GSR_MCINT       (1 << 7)        /* Mic In Interrupt */
 370 #define GSR_POINT       (1 << 6)        /* PCM Out Interrupt */
 371 #define GSR_PIINT       (1 << 5)        /* PCM In Interrupt */
 372 #define GSR_ACOFFD      (1 << 3)        /* AC-link Shut Off Done */
 373 #define GSR_MOINT       (1 << 2)        /* Modem Out Interrupt */
 374 #define GSR_MIINT       (1 << 1)        /* Modem In Interrupt */
 375 #define GSR_GSCI        (1 << 0)        /* Codec GPI Status Change Interrupt */
 376
 377 #define CAR             __REG(0x40500020)  /* CODEC Access Register */
 378 #define CAR_CAIP        (1 << 0)        /* Codec Access In Progress */
 379
 380 #define PCDR            __REG(0x40500040)  /* PCM FIFO Data Register */
 381 #define MCDR            __REG(0x40500060)  /* Mic-in FIFO Data Register */
 382
 383 #define MOCR            __REG(0x40500100)  /* Modem Out Control Register */
 384 #define MOCR_FEIE       (1 << 3)        /* FIFO Error */
 385 #define MOCR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */
 386
 387 #define MICR            __REG(0x40500108)  /* Modem In Control Register */
 388 #define MICR_FEIE       (1 << 3)        /* FIFO Error */
 389 #define MICR_FSRIE      (1 << 1)        /* FIFO Service Request Interrupt Enable */
 390
 391 #define MOSR            __REG(0x40500110)  /* Modem Out Status Register */
 392 #define MOSR_FIFOE      (1 << 4)        /* FIFO error */
 393 #define MOSR_FSR        (1 << 2)        /* FIFO Service Request */
 394
 395 #define MISR            __REG(0x40500118)  /* Modem In Status Register */
 396 #define MISR_FIFOE      (1 << 4)        /* FIFO error */
 397 #define MISR_EOC        (1 << 3)        /* DMA End-of-Chain (exclusive clear) */
 398 #define MISR_FSR        (1 << 2)        /* FIFO Service Request */
 399
 400 #define MODR            __REG(0x40500140)  /* Modem FIFO Data Register */
 401
 402 #define PAC_REG_BASE    __REG(0x40500200)  /* Primary Audio Codec */
 403 #define SAC_REG_BASE    __REG(0x40500300)  /* Secondary Audio Codec */
 404 #define PMC_REG_BASE    __REG(0x40500400)  /* Primary Modem Codec */
 405 #define SMC_REG_BASE    __REG(0x40500500)  /* Secondary Modem Codec */
 406
 407
 408 /*
 409  * Fast Infrared Communication Port
 410  */
 411
 412 #define FICP            __REG(0x40800000)  /* Start of FICP area */
 413 #define ICCR0           __REG(0x40800000)  /* ICP Control Register 0 */
 414 #define ICCR1           __REG(0x40800004)  /* ICP Control Register 1 */
 415 #define ICCR2           __REG(0x40800008)  /* ICP Control Register 2 */
 416 #define ICDR            __REG(0x4080000c)  /* ICP Data Register */
 417 #define ICSR0           __REG(0x40800014)  /* ICP Status Register 0 */
 418 #define ICSR1           __REG(0x40800018)  /* ICP Status Register 1 */
 419
 420 #define ICCR0_AME       (1 << 7)        /* Address match enable */
 421 #define ICCR0_TIE       (1 << 6)        /* Transmit FIFO interrupt enable */
 422 #define ICCR0_RIE       (1 << 5)        /* Recieve FIFO interrupt enable */
 423 #define ICCR0_RXE       (1 << 4)        /* Receive enable */
 424 #define ICCR0_TXE       (1 << 3)        /* Transmit enable */
 425 #define ICCR0_TUS       (1 << 2)        /* Transmit FIFO underrun select */
 426 #define ICCR0_LBM       (1 << 1)        /* Loopback mode */
 427 #define ICCR0_ITR       (1 << 0)        /* IrDA transmission */
 428
 429 #define ICCR2_RXP       (1 << 3)        /* Receive Pin Polarity select */
 430 #define ICCR2_TXP       (1 << 2)        /* Transmit Pin Polarity select */
 431 #define ICCR2_TRIG      (3 << 0)        /* Receive FIFO Trigger threshold */
 432 #define ICCR2_TRIG_8    (0 << 0)        /*      >= 8 bytes */
 433 #define ICCR2_TRIG_16   (1 << 0)        /*      >= 16 bytes */
 434 #define ICCR2_TRIG_32   (2 << 0)        /*      >= 32 bytes */
 435
 436 #ifdef CONFIG_PXA27x
 437 #define ICSR0_EOC       (1 << 6)        /* DMA End of Descriptor Chain */
 438 #endif
 439 #define ICSR0_FRE       (1 << 5)        /* Framing error */
 440 #define ICSR0_RFS       (1 << 4)        /* Receive FIFO service request */
 441 #define ICSR0_TFS       (1 << 3)        /* Transnit FIFO service request */
 442 #define ICSR0_RAB       (1 << 2)        /* Receiver abort */
 443 #define ICSR0_TUR       (1 << 1)        /* Trunsmit FIFO underun */
 444 #define ICSR0_EIF       (1 << 0)        /* End/Error in FIFO */
 445
 446 #define ICSR1_ROR       (1 << 6)        /* Receiver FIFO underrun  */
 447 #define ICSR1_CRE       (1 << 5)        /* CRC error */
 448 #define ICSR1_EOF       (1 << 4)        /* End of frame */
 449 #define ICSR1_TNF       (1 << 3)        /* Transmit FIFO not full */
 450 #define ICSR1_RNE       (1 << 2)        /* Receive FIFO not empty */
 451 #define ICSR1_TBY       (1 << 1)        /* Tramsmiter busy flag */
 452 #define ICSR1_RSY       (1 << 0)        /* Recevier synchronized flag */
 453
 454
 455 /*
 456  * Real Time Clock
 457  */
 458
 459 #define RCNR            __REG(0x40900000)  /* RTC Count Register */
 460 #define RTAR            __REG(0x40900004)  /* RTC Alarm Register */
 461 #define RTSR            __REG(0x40900008)  /* RTC Status Register */
 462 #define RTTR            __REG(0x4090000C)  /* RTC Timer Trim Register */
 463 #define PIAR            __REG(0x40900038)  /* Periodic Interrupt Alarm Register */
 464
 465 #define RTSR_PICE       (1 << 15)       /* Periodic interrupt count enable */
 466 #define RTSR_PIALE      (1 << 14)       /* Periodic interrupt Alarm enable */
 467 #define RTSR_HZE        (1 << 3)        /* HZ interrupt enable */
 468 #define RTSR_ALE        (1 << 2)        /* RTC alarm interrupt enable */
 469 #define RTSR_HZ         (1 << 1)        /* HZ rising-edge detected */
 470 #define RTSR_AL         (1 << 0)        /* RTC alarm detected */
 471
 472
 473 /*
 474  * OS Timer & Match Registers
 475  */
 476
 477 #define OSMR0           __REG(0x40A00000)  /* */
 478 #define OSMR1           __REG(0x40A00004)  /* */
 479 #define OSMR2           __REG(0x40A00008)  /* */
 480 #define OSMR3           __REG(0x40A0000C)  /* */
 481 #define OSMR4           __REG(0x40A00080)  /* */
 482 #define OSCR            __REG(0x40A00010)  /* OS Timer Counter Register */
 483 #define OSCR4           __REG(0x40A00040)  /* OS Timer Counter Register */
 484 #define OMCR4           __REG(0x40A000C0)  /* */
 485 #define OSSR            __REG(0x40A00014)  /* OS Timer Status Register */
 486 #define OWER            __REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
 487 #define OIER            __REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
 488
 489 #define OSSR_M3         (1 << 3)        /* Match status channel 3 */
 490 #define OSSR_M2         (1 << 2)        /* Match status channel 2 */
 491 #define OSSR_M1         (1 << 1)        /* Match status channel 1 */
 492 #define OSSR_M0         (1 << 0)        /* Match status channel 0 */
 493
 494 #define OWER_WME        (1 << 0)        /* Watchdog Match Enable */
 495
 496 #define OIER_E3         (1 << 3)        /* Interrupt enable channel 3 */
 497 #define OIER_E2         (1 << 2)        /* Interrupt enable channel 2 */
 498 #define OIER_E1         (1 << 1)        /* Interrupt enable channel 1 */
 499 #define OIER_E0         (1 << 0)        /* Interrupt enable channel 0 */
 500
 501
 502 /*
 503  * Pulse Width Modulator
 504  */
 505
 506 #define PWM_CTRL0       __REG(0x40B00000)  /* PWM 0 Control Register */
 507 #define PWM_PWDUTY0     __REG(0x40B00004)  /* PWM 0 Duty Cycle Register */
 508 #define PWM_PERVAL0     __REG(0x40B00008)  /* PWM 0 Period Control Register */
 509
 510 #define PWM_CTRL1       __REG(0x40C00000)  /* PWM 1Control Register */
 511 #define PWM_PWDUTY1     __REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
 512 #define PWM_PERVAL1     __REG(0x40C00008)  /* PWM 1 Period Control Register */
 513
 514
 515 /*
 516  * Interrupt Controller
 517  */
 518
 519 #define ICIP            __REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
 520 #define ICMR            __REG(0x40D00004)  /* Interrupt Controller Mask Register */
 521 #define ICLR            __REG(0x40D00008)  /* Interrupt Controller Level Register */
 522 #define ICFP            __REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
 523 #define ICPR            __REG(0x40D00010)  /* Interrupt Controller Pending Register */
 524 #define ICCR            __REG(0x40D00014)  /* Interrupt Controller Control Register */
 525
 526 #define ICIP2           __REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
 527 #define ICMR2           __REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
 528 #define ICLR2           __REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
 529 #define ICFP2           __REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
 530 #define ICPR2           __REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
 531
 532 /*
 533  * General Purpose I/O
 534  */
 535
 536 #define GPIO0_BASE      ((void __iomem *)io_p2v(0x40E00000))
 537 #define GPIO1_BASE      ((void __iomem *)io_p2v(0x40E00004))
 538 #define GPIO2_BASE      ((void __iomem *)io_p2v(0x40E00008))
 539 #define GPIO3_BASE      ((void __iomem *)io_p2v(0x40E00100))
 540
 541 #define GPLR_OFFSET     0x00
 542 #define GPDR_OFFSET     0x0C
 543 #define GPSR_OFFSET     0x18
 544 #define GPCR_OFFSET     0x24
 545 #define GRER_OFFSET     0x30
 546 #define GFER_OFFSET     0x3C
 547 #define GEDR_OFFSET     0x48
 548
 549 #define GPLR0           __REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
 550 #define GPLR1           __REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
 551 #define GPLR2           __REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
 552
 553 #define GPDR0           __REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
 554 #define GPDR1           __REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
 555 #define GPDR2           __REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */
 556
 557 #define GPSR0           __REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
 558 #define GPSR1           __REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
 559 #define GPSR2           __REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */
 560
 561 #define GPCR0           __REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
 562 #define GPCR1           __REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
 563 #define GPCR2           __REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */
 564
 565 #define GRER0           __REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
 566 #define GRER1           __REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
 567 #define GRER2           __REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */
 568
 569 #define GFER0           __REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
 570 #define GFER1           __REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
 571 #define GFER2           __REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */
 572
 573 #define GEDR0           __REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
 574 #define GEDR1           __REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
 575 #define GEDR2           __REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */
 576
 577 #define GAFR0_L         __REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
 578 #define GAFR0_U         __REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
 579 #define GAFR1_L         __REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
 580 #define GAFR1_U         __REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
 581 #define GAFR2_L         __REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
 582 #define GAFR2_U         __REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO<95-80> */
 583 #define GAFR3_L         __REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
 584 #define GAFR3_U         __REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
 585
 586 #define GPLR3           __REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
 587 #define GPDR3           __REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
 588 #define GPSR3           __REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
 589 #define GPCR3           __REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
 590 #define GRER3           __REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
 591 #define GFER3           __REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
 592 #define GEDR3           __REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */
 593
 594 /* More handy macros.  The argument is a literal GPIO number. */
 595
 596 #define GPIO_bit(x)     (1 << ((x) & 0x1f))
 597
 598 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 599
 600 /* Interrupt Controller */
 601
 602 #define _GPLR(x)        __REG2(0x40E00000, ((x) & 0x60) >> 3)
 603 #define _GPDR(x)        __REG2(0x40E0000C, ((x) & 0x60) >> 3)
 604 #define _GPSR(x)        __REG2(0x40E00018, ((x) & 0x60) >> 3)
 605 #define _GPCR(x)        __REG2(0x40E00024, ((x) & 0x60) >> 3)
 606 #define _GRER(x)        __REG2(0x40E00030, ((x) & 0x60) >> 3)
 607 #define _GFER(x)        __REG2(0x40E0003C, ((x) & 0x60) >> 3)
 608 #define _GEDR(x)        __REG2(0x40E00048, ((x) & 0x60) >> 3)
 609 #define _GAFR(x)        __REG2(0x40E00054, ((x) & 0x70) >> 2)
 610
 611 #define GPLR(x)         (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
 612 #define GPDR(x)         (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
 613 #define GPSR(x)         (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
 614 #define GPCR(x)         (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
 615 #define GRER(x)         (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
 616 #define GFER(x)         (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
 617 #define GEDR(x)         (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
 618 #define GAFR(x)         (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
 619                          ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
 620 #else
 621
 622 #define GPLR(x)         __REG2(0x40E00000, ((x) & 0x60) >> 3)
 623 #define GPDR(x)         __REG2(0x40E0000C, ((x) & 0x60) >> 3)
 624 #define GPSR(x)         __REG2(0x40E00018, ((x) & 0x60) >> 3)
 625 #define GPCR(x)         __REG2(0x40E00024, ((x) & 0x60) >> 3)
 626 #define GRER(x)         __REG2(0x40E00030, ((x) & 0x60) >> 3)
 627 #define GFER(x)         __REG2(0x40E0003C, ((x) & 0x60) >> 3)
 628 #define GEDR(x)         __REG2(0x40E00048, ((x) & 0x60) >> 3)
 629 #define GAFR(x)         __REG2(0x40E00054, ((x) & 0x70) >> 2)
 630
 631 #endif
 632
 633 /*
 634  * Power Manager - see pxa2xx-regs.h
 635  */
 636
 637 /*
 638  * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h
 639  */
 640
 641 /*
 642  * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
 643  */
 644
 645 /*
 646  * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
 647  */
 648
 649 #ifdef CONFIG_PXA27x
 650
 651 /* Camera Interface */
 652 #define CICR0           __REG(0x50000000)
 653 #define CICR1           __REG(0x50000004)
 654 #define CICR2           __REG(0x50000008)
 655 #define CICR3           __REG(0x5000000C)
 656 #define CICR4           __REG(0x50000010)
 657 #define CISR            __REG(0x50000014)
 658 #define CIFR            __REG(0x50000018)
 659 #define CITOR           __REG(0x5000001C)
 660 #define CIBR0           __REG(0x50000028)
 661 #define CIBR1           __REG(0x50000030)
 662 #define CIBR2           __REG(0x50000038)
 663
 664 #define CICR0_DMAEN     (1 << 31)       /* DMA request enable */
 665 #define CICR0_PAR_EN    (1 << 30)       /* Parity enable */
 666 #define CICR0_SL_CAP_EN (1 << 29)       /* Capture enable for slave mode */
 667 #define CICR0_ENB       (1 << 28)       /* Camera interface enable */
 668 #define CICR0_DIS       (1 << 27)       /* Camera interface disable */
 669 #define CICR0_SIM       (0x7 << 24)     /* Sensor interface mode mask */
 670 #define CICR0_TOM       (1 << 9)        /* Time-out mask */
 671 #define CICR0_RDAVM     (1 << 8)        /* Receive-data-available mask */
 672 #define CICR0_FEM       (1 << 7)        /* FIFO-empty mask */
 673 #define CICR0_EOLM      (1 << 6)        /* End-of-line mask */
 674 #define CICR0_PERRM     (1 << 5)        /* Parity-error mask */
 675 #define CICR0_QDM       (1 << 4)        /* Quick-disable mask */
 676 #define CICR0_CDM       (1 << 3)        /* Disable-done mask */
 677 #define CICR0_SOFM      (1 << 2)        /* Start-of-frame mask */
 678 #define CICR0_EOFM      (1 << 1)        /* End-of-frame mask */
 679 #define CICR0_FOM       (1 << 0)        /* FIFO-overrun mask */
 680
 681 #define CICR1_TBIT      (1 << 31)       /* Transparency bit */
 682 #define CICR1_RGBT_CONV (0x3 << 29)     /* RGBT conversion mask */
 683 #define CICR1_PPL       (0x7ff << 15)   /* Pixels per line mask */
 684 #define CICR1_RGB_CONV  (0x7 << 12)     /* RGB conversion mask */
 685 #define CICR1_RGB_F     (1 << 11)       /* RGB format */
 686 #define CICR1_YCBCR_F   (1 << 10)       /* YCbCr format */
 687 #define CICR1_RGB_BPP   (0x7 << 7)      /* RGB bis per pixel mask */
 688 #define CICR1_RAW_BPP   (0x3 << 5)      /* Raw bis per pixel mask */
 689 #define CICR1_COLOR_SP  (0x3 << 3)      /* Color space mask */
 690 #define CICR1_DW        (0x7 << 0)      /* Data width mask */
 691
 692 #define CICR2_BLW       (0xff << 24)    /* Beginning-of-line pixel clock
 693                                            wait count mask */
 694 #define CICR2_ELW       (0xff << 16)    /* End-of-line pixel clock
 695                                            wait count mask */
 696 #define CICR2_HSW       (0x3f << 10)    /* Horizontal sync pulse width mask */
 697 #define CICR2_BFPW      (0x3f << 3)     /* Beginning-of-frame pixel clock
 698                                            wait count mask */
 699 #define CICR2_FSW       (0x7 << 0)      /* Frame stabilization
 700                                            wait count mask */
 701
 702 #define CICR3_BFW       (0xff << 24)    /* Beginning-of-frame line clock
 703                                            wait count mask */
 704 #define CICR3_EFW       (0xff << 16)    /* End-of-frame line clock
 705                                            wait count mask */
 706 #define CICR3_VSW       (0x3f << 10)    /* Vertical sync pulse width mask */
 707 #define CICR3_BFPW      (0x3f << 3)     /* Beginning-of-frame pixel clock
 708                                            wait count mask */
 709 #define CICR3_LPF       (0x7ff << 0)    /* Lines per frame mask */
 710
 711 #define CICR4_MCLK_DLY  (0x3 << 24)     /* MCLK Data Capture Delay mask */
 712 #define CICR4_PCLK_EN   (1 << 23)       /* Pixel clock enable */
 713 #define CICR4_PCP       (1 << 22)       /* Pixel clock polarity */
 714 #define CICR4_HSP       (1 << 21)       /* Horizontal sync polarity */
 715 #define CICR4_VSP       (1 << 20)       /* Vertical sync polarity */
 716 #define CICR4_MCLK_EN   (1 << 19)       /* MCLK enable */
 717 #define CICR4_FR_RATE   (0x7 << 8)      /* Frame rate mask */
 718 #define CICR4_DIV       (0xff << 0)     /* Clock divisor mask */
 719
 720 #define CISR_FTO        (1 << 15)       /* FIFO time-out */
 721 #define CISR_RDAV_2     (1 << 14)       /* Channel 2 receive data available */
 722 #define CISR_RDAV_1     (1 << 13)       /* Channel 1 receive data available */
 723 #define CISR_RDAV_0     (1 << 12)       /* Channel 0 receive data available */
 724 #define CISR_FEMPTY_2   (1 << 11)       /* Channel 2 FIFO empty */
 725 #define CISR_FEMPTY_1   (1 << 10)       /* Channel 1 FIFO empty */
 726 #define CISR_FEMPTY_0   (1 << 9)        /* Channel 0 FIFO empty */
 727 #define CISR_EOL        (1 << 8)        /* End of line */
 728 #define CISR_PAR_ERR    (1 << 7)        /* Parity error */
 729 #define CISR_CQD        (1 << 6)        /* Camera interface quick disable */
 730 #define CISR_CDD        (1 << 5)        /* Camera interface disable done */
 731 #define CISR_SOF        (1 << 4)        /* Start of frame */
 732 #define CISR_EOF        (1 << 3)        /* End of frame */
 733 #define CISR_IFO_2      (1 << 2)        /* FIFO overrun for Channel 2 */
 734 #define CISR_IFO_1      (1 << 1)        /* FIFO overrun for Channel 1 */
 735 #define CISR_IFO_0      (1 << 0)        /* FIFO overrun for Channel 0 */
 736
 737 #define CIFR_FLVL2      (0x7f << 23)    /* FIFO 2 level mask */
 738 #define CIFR_FLVL1      (0x7f << 16)    /* FIFO 1 level mask */
 739 #define CIFR_FLVL0      (0xff << 8)     /* FIFO 0 level mask */
 740 #define CIFR_THL_0      (0x3 << 4)      /* Threshold Level for Channel 0 FIFO */
 741 #define CIFR_RESET_F    (1 << 3)        /* Reset input FIFOs */
 742 #define CIFR_FEN2       (1 << 2)        /* FIFO enable for channel 2 */
 743 #define CIFR_FEN1       (1 << 1)        /* FIFO enable for channel 1 */
 744 #define CIFR_FEN0       (1 << 0)        /* FIFO enable for channel 0 */
 745
 746 #define SRAM_SIZE               0x40000 /* 4x64K  */
 747
 748 #define SRAM_MEM_PHYS           0x5C000000
 749
 750 #define IMPMCR          __REG(0x58000000) /* IM Power Management Control Reg */
 751 #define IMPMSR          __REG(0x58000008) /* IM Power Management Status Reg */
 752
 753 #define IMPMCR_PC3              (0x3 << 22) /* Bank 3 Power Control */
 754 #define IMPMCR_PC3_RUN_MODE     (0x0 << 22) /*   Run mode */
 755 #define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /*   Standby mode */
 756 #define IMPMCR_PC3_AUTO_MODE    (0x3 << 22) /*   Automatically controlled */
 757
 758 #define IMPMCR_PC2              (0x3 << 20) /* Bank 2 Power Control */
 759 #define IMPMCR_PC2_RUN_MODE     (0x0 << 20) /*   Run mode */
 760 #define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /*   Standby mode */
 761 #define IMPMCR_PC2_AUTO_MODE    (0x3 << 20) /*   Automatically controlled */
 762
 763 #define IMPMCR_PC1              (0x3 << 18) /* Bank 1 Power Control */
 764 #define IMPMCR_PC1_RUN_MODE     (0x0 << 18) /*   Run mode */
 765 #define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /*   Standby mode */
 766 #define IMPMCR_PC1_AUTO_MODE    (0x3 << 18) /*   Automatically controlled */
 767
 768 #define IMPMCR_PC0              (0x3 << 16) /* Bank 0 Power Control */
 769 #define IMPMCR_PC0_RUN_MODE     (0x0 << 16) /*   Run mode */
 770 #define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /*   Standby mode */
 771 #define IMPMCR_PC0_AUTO_MODE    (0x3 << 16) /*   Automatically controlled */
 772
 773 #define IMPMCR_AW3              (1 << 11) /* Bank 3 Automatic Wake-up enable */
 774 #define IMPMCR_AW2              (1 << 10) /* Bank 2 Automatic Wake-up enable */
 775 #define IMPMCR_AW1              (1 << 9)  /* Bank 1 Automatic Wake-up enable */
 776 #define IMPMCR_AW0              (1 << 8)  /* Bank 0 Automatic Wake-up enable */
 777
 778 #define IMPMCR_DST              (0xFF << 0) /* Delay Standby Time, ms */
 779
 780 #define IMPMSR_PS3              (0x3 << 6) /* Bank 3 Power Status: */
 781 #define IMPMSR_PS3_RUN_MODE     (0x0 << 6) /*    Run mode */
 782 #define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /*    Standby mode */
 783
 784 #define IMPMSR_PS2              (0x3 << 4) /* Bank 2 Power Status: */
 785 #define IMPMSR_PS2_RUN_MODE     (0x0 << 4) /*    Run mode */
 786 #define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /*    Standby mode */
 787
 788 #define IMPMSR_PS1              (0x3 << 2) /* Bank 1 Power Status: */
 789 #define IMPMSR_PS1_RUN_MODE     (0x0 << 2) /*    Run mode */
 790 #define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /*    Standby mode */
 791
 792 #define IMPMSR_PS0              (0x3 << 0) /* Bank 0 Power Status: */
 793 #define IMPMSR_PS0_RUN_MODE     (0x0 << 0) /*    Run mode */
 794 #define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /*    Standby mode */
 795
 796 #endif
 797
 798 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 799 /*
 800  * UHC: USB Host Controller (OHCI-like) register definitions
 801  */
 802 #define UHC_BASE_PHYS   (0x4C000000)
 803 #define UHCREV          __REG(0x4C000000) /* UHC HCI Spec Revision */
 804 #define UHCHCON         __REG(0x4C000004) /* UHC Host Control Register */
 805 #define UHCCOMS         __REG(0x4C000008) /* UHC Command Status Register */
 806 #define UHCINTS         __REG(0x4C00000C) /* UHC Interrupt Status Register */
 807 #define UHCINTE         __REG(0x4C000010) /* UHC Interrupt Enable */
 808 #define UHCINTD         __REG(0x4C000014) /* UHC Interrupt Disable */
 809 #define UHCHCCA         __REG(0x4C000018) /* UHC Host Controller Comm. Area */
 810 #define UHCPCED         __REG(0x4C00001C) /* UHC Period Current Endpt Descr */
 811 #define UHCCHED         __REG(0x4C000020) /* UHC Control Head Endpt Descr */
 812 #define UHCCCED         __REG(0x4C000024) /* UHC Control Current Endpt Descr */
 813 #define UHCBHED         __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
 814 #define UHCBCED         __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
 815 #define UHCDHEAD        __REG(0x4C000030) /* UHC Done Head */
 816 #define UHCFMI          __REG(0x4C000034) /* UHC Frame Interval */
 817 #define UHCFMR          __REG(0x4C000038) /* UHC Frame Remaining */
 818 #define UHCFMN          __REG(0x4C00003C) /* UHC Frame Number */
 819 #define UHCPERS         __REG(0x4C000040) /* UHC Periodic Start */
 820 #define UHCLS           __REG(0x4C000044) /* UHC Low Speed Threshold */
 821
 822 #define UHCRHDA         __REG(0x4C000048) /* UHC Root Hub Descriptor A */
 823 #define UHCRHDA_NOCP    (1 << 12)       /* No over current protection */
 824
 825 #define UHCRHDB         __REG(0x4C00004C) /* UHC Root Hub Descriptor B */
 826 #define UHCRHS          __REG(0x4C000050) /* UHC Root Hub Status */
 827 #define UHCRHPS1        __REG(0x4C000054) /* UHC Root Hub Port 1 Status */
 828 #define UHCRHPS2        __REG(0x4C000058) /* UHC Root Hub Port 2 Status */
 829 #define UHCRHPS3        __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
 830
 831 #define UHCSTAT         __REG(0x4C000060) /* UHC Status Register */
 832 #define UHCSTAT_UPS3    (1 << 16)       /* USB Power Sense Port3 */
 833 #define UHCSTAT_SBMAI   (1 << 15)       /* System Bus Master Abort Interrupt*/
 834 #define UHCSTAT_SBTAI   (1 << 14)       /* System Bus Target Abort Interrupt*/
 835 #define UHCSTAT_UPRI    (1 << 13)       /* USB Port Resume Interrupt */
 836 #define UHCSTAT_UPS2    (1 << 12)       /* USB Power Sense Port 2 */
 837 #define UHCSTAT_UPS1    (1 << 11)       /* USB Power Sense Port 1 */
 838 #define UHCSTAT_HTA     (1 << 10)       /* HCI Target Abort */
 839 #define UHCSTAT_HBA     (1 << 8)        /* HCI Buffer Active */
 840 #define UHCSTAT_RWUE    (1 << 7)        /* HCI Remote Wake Up Event */
 841
 842 #define UHCHR           __REG(0x4C000064) /* UHC Reset Register */
 843 #define UHCHR_SSEP3     (1 << 11)       /* Sleep Standby Enable for Port3 */
 844 #define UHCHR_SSEP2     (1 << 10)       /* Sleep Standby Enable for Port2 */
 845 #define UHCHR_SSEP1     (1 << 9)        /* Sleep Standby Enable for Port1 */
 846 #define UHCHR_PCPL      (1 << 7)        /* Power control polarity low */
 847 #define UHCHR_PSPL      (1 << 6)        /* Power sense polarity low */
 848 #define UHCHR_SSE       (1 << 5)        /* Sleep Standby Enable */
 849 #define UHCHR_UIT       (1 << 4)        /* USB Interrupt Test */
 850 #define UHCHR_SSDC      (1 << 3)        /* Simulation Scale Down Clock */
 851 #define UHCHR_CGR       (1 << 2)        /* Clock Generation Reset */
 852 #define UHCHR_FHR       (1 << 1)        /* Force Host Controller Reset */
 853 #define UHCHR_FSBIR     (1 << 0)        /* Force System Bus Iface Reset */
 854
 855 #define UHCHIE          __REG(0x4C000068) /* UHC Interrupt Enable Register*/
 856 #define UHCHIE_UPS3IE   (1 << 14)       /* Power Sense Port3 IntEn */
 857 #define UHCHIE_UPRIE    (1 << 13)       /* Port Resume IntEn */
 858 #define UHCHIE_UPS2IE   (1 << 12)       /* Power Sense Port2 IntEn */
 859 #define UHCHIE_UPS1IE   (1 << 11)       /* Power Sense Port1 IntEn */
 860 #define UHCHIE_TAIE     (1 << 10)       /* HCI Interface Transfer Abort
 861                                            Interrupt Enable*/
 862 #define UHCHIE_HBAIE    (1 << 8)        /* HCI Buffer Active IntEn */
 863 #define UHCHIE_RWIE     (1 << 7)        /* Remote Wake-up IntEn */
 864
 865 #define UHCHIT          __REG(0x4C00006C) /* UHC Interrupt Test register */
 866
 867 #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
 868
 869 /* PWRMODE register M field values */
 870
 871 #define PWRMODE_IDLE            0x1
 872 #define PWRMODE_STANDBY         0x2
 873 #define PWRMODE_SLEEP           0x3
 874 #define PWRMODE_DEEPSLEEP       0x7
 875
 876 #endif