Revert "USB: xhci: Use GFP_ATOMIC under spin_lock"
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / mm / proc-macros.S
blob7d63beaf97456541c0718c84b475b844194156e6
1 /*
2  * We need constants.h for:
3  *  VMA_VM_MM
4  *  VMA_VM_FLAGS
5  *  VM_EXEC
6  */
7 #include <asm/asm-offsets.h>
8 #include <asm/thread_info.h>
11  * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
12  */
13         .macro  vma_vm_mm, rd, rn
14         ldr     \rd, [\rn, #VMA_VM_MM]
15         .endm
18  * vma_vm_flags - get vma->vm_flags
19  */
20         .macro  vma_vm_flags, rd, rn
21         ldr     \rd, [\rn, #VMA_VM_FLAGS]
22         .endm
24         .macro  tsk_mm, rd, rn
25         ldr     \rd, [\rn, #TI_TASK]
26         ldr     \rd, [\rd, #TSK_ACTIVE_MM]
27         .endm
30  * act_mm - get current->active_mm
31  */
32         .macro  act_mm, rd
33         bic     \rd, sp, #8128
34         bic     \rd, \rd, #63
35         ldr     \rd, [\rd, #TI_TASK]
36         ldr     \rd, [\rd, #TSK_ACTIVE_MM]
37         .endm
40  * mmid - get context id from mm pointer (mm->context.id)
41  */
42         .macro  mmid, rd, rn
43         ldr     \rd, [\rn, #MM_CONTEXT_ID]
44         .endm
47  * mask_asid - mask the ASID from the context ID
48  */
49         .macro  asid, rd, rn
50         and     \rd, \rn, #255
51         .endm
53         .macro  crval, clear, mmuset, ucset
54 #ifdef CONFIG_MMU
55         .word   \clear
56         .word   \mmuset
57 #else
58         .word   \clear
59         .word   \ucset
60 #endif
61         .endm
64  * cache_line_size - get the cache line size from the CSIDR register
65  * (available on ARMv7+). It assumes that the CSSR register was configured
66  * to access the L1 data cache CSIDR.
67  */
68         .macro  dcache_line_size, reg, tmp
69         mrc     p15, 1, \tmp, c0, c0, 0         @ read CSIDR
70         and     \tmp, \tmp, #7                  @ cache line size encoding
71         mov     \reg, #16                       @ size offset
72         mov     \reg, \reg, lsl \tmp            @ actual cache line size
73         .endm
77  * Sanity check the PTE configuration for the code below - which makes
78  * certain assumptions about how these bits are layed out.
79  */
80 #ifdef CONFIG_MMU
81 #if L_PTE_SHARED != PTE_EXT_SHARED
82 #error PTE shared bit mismatch
83 #endif
84 #if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\
85      L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
86 #error Invalid Linux PTE bit settings
87 #endif
88 #endif  /* CONFIG_MMU */
91  * The ARMv6 and ARMv7 set_pte_ext translation function.
92  *
93  * Permission translation:
94  *  YUWD  APX AP1 AP0   SVC     User
95  *  0xxx   0   0   0    no acc  no acc
96  *  100x   1   0   1    r/o     no acc
97  *  10x0   1   0   1    r/o     no acc
98  *  1011   0   0   1    r/w     no acc
99  *  110x   0   1   0    r/w     r/o
100  *  11x0   0   1   0    r/w     r/o
101  *  1111   0   1   1    r/w     r/w
102  */
103         .macro  armv6_mt_table pfx
104 \pfx\()_mt_table:
105         .long   0x00                                            @ L_PTE_MT_UNCACHED
106         .long   PTE_EXT_TEX(1)                                  @ L_PTE_MT_BUFFERABLE
107         .long   PTE_CACHEABLE                                   @ L_PTE_MT_WRITETHROUGH
108         .long   PTE_CACHEABLE | PTE_BUFFERABLE                  @ L_PTE_MT_WRITEBACK
109         .long   PTE_BUFFERABLE                                  @ L_PTE_MT_DEV_SHARED
110         .long   0x00                                            @ unused
111         .long   0x00                                            @ L_PTE_MT_MINICACHE (not present)
112         .long   PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE @ L_PTE_MT_WRITEALLOC
113         .long   0x00                                            @ unused
114         .long   PTE_EXT_TEX(1)                                  @ L_PTE_MT_DEV_WC
115         .long   0x00                                            @ unused
116         .long   PTE_CACHEABLE | PTE_BUFFERABLE                  @ L_PTE_MT_DEV_CACHED
117         .long   PTE_EXT_TEX(2)                                  @ L_PTE_MT_DEV_NONSHARED
118         .long   0x00                                            @ unused
119         .long   0x00                                            @ unused
120         .long   0x00                                            @ unused
121         .endm
123         .macro  armv6_set_pte_ext pfx
124         str     r1, [r0], #-2048                @ linux version
126         bic     r3, r1, #0x000003fc
127         bic     r3, r3, #PTE_TYPE_MASK
128         orr     r3, r3, r2
129         orr     r3, r3, #PTE_EXT_AP0 | 2
131         adr     ip, \pfx\()_mt_table
132         and     r2, r1, #L_PTE_MT_MASK
133         ldr     r2, [ip, r2]
135         tst     r1, #L_PTE_WRITE
136         tstne   r1, #L_PTE_DIRTY
137         orreq   r3, r3, #PTE_EXT_APX
139         tst     r1, #L_PTE_USER
140         orrne   r3, r3, #PTE_EXT_AP1
141         tstne   r3, #PTE_EXT_APX
142         bicne   r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
144         tst     r1, #L_PTE_EXEC
145         orreq   r3, r3, #PTE_EXT_XN
147         orr     r3, r3, r2
149         tst     r1, #L_PTE_YOUNG
150         tstne   r1, #L_PTE_PRESENT
151         moveq   r3, #0
153         str     r3, [r0]
154         mcr     p15, 0, r0, c7, c10, 1          @ flush_pte
155         .endm
159  * The ARMv3, ARMv4 and ARMv5 set_pte_ext translation function,
160  * covering most CPUs except Xscale and Xscale 3.
162  * Permission translation:
163  *  YUWD   AP   SVC     User
164  *  0xxx  0x00  no acc  no acc
165  *  100x  0x00  r/o     no acc
166  *  10x0  0x00  r/o     no acc
167  *  1011  0x55  r/w     no acc
168  *  110x  0xaa  r/w     r/o
169  *  11x0  0xaa  r/w     r/o
170  *  1111  0xff  r/w     r/w
171  */
172         .macro  armv3_set_pte_ext wc_disable=1
173         str     r1, [r0], #-2048                @ linux version
175         eor     r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
177         bic     r2, r1, #PTE_SMALL_AP_MASK      @ keep C, B bits
178         bic     r2, r2, #PTE_TYPE_MASK
179         orr     r2, r2, #PTE_TYPE_SMALL
181         tst     r3, #L_PTE_USER                 @ user?
182         orrne   r2, r2, #PTE_SMALL_AP_URO_SRW
184         tst     r3, #L_PTE_WRITE | L_PTE_DIRTY  @ write and dirty?
185         orreq   r2, r2, #PTE_SMALL_AP_UNO_SRW
187         tst     r3, #L_PTE_PRESENT | L_PTE_YOUNG        @ present and young?
188         movne   r2, #0
190         .if     \wc_disable
191 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
192         tst     r2, #PTE_CACHEABLE
193         bicne   r2, r2, #PTE_BUFFERABLE
194 #endif
195         .endif
196         str     r2, [r0]                        @ hardware version
197         .endm
201  * Xscale set_pte_ext translation, split into two halves to cope
202  * with work-arounds.  r3 must be preserved by code between these
203  * two macros.
205  * Permission translation:
206  *  YUWD  AP    SVC     User
207  *  0xxx  00    no acc  no acc
208  *  100x  00    r/o     no acc
209  *  10x0  00    r/o     no acc
210  *  1011  01    r/w     no acc
211  *  110x  10    r/w     r/o
212  *  11x0  10    r/w     r/o
213  *  1111  11    r/w     r/w
214  */
215         .macro  xscale_set_pte_ext_prologue
216         str     r1, [r0], #-2048                @ linux version
218         eor     r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
220         bic     r2, r1, #PTE_SMALL_AP_MASK      @ keep C, B bits
221         orr     r2, r2, #PTE_TYPE_EXT           @ extended page
223         tst     r3, #L_PTE_USER                 @ user?
224         orrne   r2, r2, #PTE_EXT_AP_URO_SRW     @ yes -> user r/o, system r/w
226         tst     r3, #L_PTE_WRITE | L_PTE_DIRTY  @ write and dirty?
227         orreq   r2, r2, #PTE_EXT_AP_UNO_SRW     @ yes -> user n/a, system r/w
228                                                 @ combined with user -> user r/w
229         .endm
231         .macro  xscale_set_pte_ext_epilogue
232         tst     r3, #L_PTE_PRESENT | L_PTE_YOUNG        @ present and young?
233         movne   r2, #0                          @ no -> fault
235         str     r2, [r0]                        @ hardware version
236         mov     ip, #0
237         mcr     p15, 0, r0, c7, c10, 1          @ clean L1 D line
238         mcr     p15, 0, ip, c7, c10, 4          @ data write barrier
239         .endm