drivers/net/zorro8390.c

   1 /*
   2  *  Amiga Linux/m68k and Linux/PPC Zorro NS8390 Ethernet Driver
   3  *
   4  *  (C) Copyright 1998-2000 by some Elitist 680x0 Users(TM)
   5  *
   6  *  ---------------------------------------------------------------------------
   7  *
   8  *  This program is based on all the other NE2000 drivers for Linux
   9  *
  10  *  ---------------------------------------------------------------------------
  11  *
  12  *  This file is subject to the terms and conditions of the GNU General Public
  13  *  License.  See the file COPYING in the main directory of the Linux
  14  *  distribution for more details.
  15  *
  16  *  ---------------------------------------------------------------------------
  17  *
  18  *  The Ariadne II and X-Surf are Zorro-II boards containing Realtek RTL8019AS
  19  *  Ethernet Controllers.
  20  */
  21
  22 #include <linux/module.h>
  23 #include <linux/kernel.h>
  24 #include <linux/errno.h>
  25 #include <linux/init.h>
  26 #include <linux/delay.h>
  27 #include <linux/netdevice.h>
  28 #include <linux/etherdevice.h>
  29 #include <linux/zorro.h>
  30 #include <linux/jiffies.h>
  31
  32 #include <asm/system.h>
  33 #include <asm/irq.h>
  34 #include <asm/amigaints.h>
  35 #include <asm/amigahw.h>
  36
  37 #define EI_SHIFT(x)     (ei_local->reg_offset[x])
  38 #define ei_inb(port)   in_8(port)
  39 #define ei_outb(val,port)  out_8(port,val)
  40 #define ei_inb_p(port)   in_8(port)
  41 #define ei_outb_p(val,port)  out_8(port,val)
  42
  43 static const char version[] =
  44     "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
  45
  46 #include "lib8390.c"
  47
  48 #define DRV_NAME        "zorro8390"
  49
  50 #define NE_BASE         (dev->base_addr)
  51 #define NE_CMD          (0x00*2)
  52 #define NE_DATAPORT     (0x10*2)        /* NatSemi-defined port window offset. */
  53 #define NE_RESET        (0x1f*2)        /* Issue a read to reset, a write to clear. */
  54 #define NE_IO_EXTENT    (0x20*2)
  55
  56 #define NE_EN0_ISR      (0x07*2)
  57 #define NE_EN0_DCFG     (0x0e*2)
  58
  59 #define NE_EN0_RSARLO   (0x08*2)
  60 #define NE_EN0_RSARHI   (0x09*2)
  61 #define NE_EN0_RCNTLO   (0x0a*2)
  62 #define NE_EN0_RXCR     (0x0c*2)
  63 #define NE_EN0_TXCR     (0x0d*2)
  64 #define NE_EN0_RCNTHI   (0x0b*2)
  65 #define NE_EN0_IMR      (0x0f*2)
  66
  67 #define NESM_START_PG   0x40    /* First page of TX buffer */
  68 #define NESM_STOP_PG    0x80    /* Last page +1 of RX ring */
  69
  70
  71 #define WORDSWAP(a)     ((((a)>>8)&0xff) | ((a)<<8))
  72
  73
  74 static struct card_info {
  75     zorro_id id;
  76     const char *name;
  77     unsigned int offset;
  78 } cards[] __devinitdata = {
  79     { ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, "Ariadne II", 0x0600 },
  80     { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, "X-Surf", 0x8600 },
  81 };
  82
  83 static int __devinit zorro8390_init_one(struct zorro_dev *z,
  84                                         const struct zorro_device_id *ent);
  85 static int __devinit zorro8390_init(struct net_device *dev,
  86                                     unsigned long board, const char *name,
  87                                     unsigned long ioaddr);
  88 static int zorro8390_open(struct net_device *dev);
  89 static int zorro8390_close(struct net_device *dev);
  90 static void zorro8390_reset_8390(struct net_device *dev);
  91 static void zorro8390_get_8390_hdr(struct net_device *dev,
  92                                    struct e8390_pkt_hdr *hdr, int ring_page);
  93 static void zorro8390_block_input(struct net_device *dev, int count,
  94                                   struct sk_buff *skb, int ring_offset);
  95 static void zorro8390_block_output(struct net_device *dev, const int count,
  96                                    const unsigned char *buf,
  97                                    const int start_page);
  98 static void __devexit zorro8390_remove_one(struct zorro_dev *z);
  99
 100 static struct zorro_device_id zorro8390_zorro_tbl[] __devinitdata = {
 101     { ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, },
 102     { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, },
 103     { 0 }
 104 };
 105
 106 static struct zorro_driver zorro8390_driver = {
 107     .name       = "zorro8390",
 108     .id_table   = zorro8390_zorro_tbl,
 109     .probe      = zorro8390_init_one,
 110     .remove     = __devexit_p(zorro8390_remove_one),
 111 };
 112
 113 static int __devinit zorro8390_init_one(struct zorro_dev *z,
 114                                         const struct zorro_device_id *ent)
 115 {
 116     struct net_device *dev;
 117     unsigned long board, ioaddr;
 118     int err, i;
 119
 120     for (i = ARRAY_SIZE(cards)-1; i >= 0; i--)
 121         if (z->id == cards[i].id)
 122             break;
 123     board = z->resource.start;
 124     ioaddr = board+cards[i].offset;
 125     dev = alloc_ei_netdev();
 126     if (!dev)
 127         return -ENOMEM;
 128     if (!request_mem_region(ioaddr, NE_IO_EXTENT*2, DRV_NAME)) {
 129         free_netdev(dev);
 130         return -EBUSY;
 131     }
 132     if ((err = zorro8390_init(dev, board, cards[i].name,
 133                               ZTWO_VADDR(ioaddr)))) {
 134         release_mem_region(ioaddr, NE_IO_EXTENT*2);
 135         free_netdev(dev);
 136         return err;
 137     }
 138     zorro_set_drvdata(z, dev);
 139     return 0;
 140 }
 141
 142 static const struct net_device_ops zorro8390_netdev_ops = {
 143         .ndo_open               = zorro8390_open,
 144         .ndo_stop               = zorro8390_close,
 145         .ndo_start_xmit         = ei_start_xmit,
 146         .ndo_tx_timeout         = ei_tx_timeout,
 147         .ndo_get_stats          = ei_get_stats,
 148         .ndo_set_multicast_list = ei_set_multicast_list,
 149         .ndo_validate_addr      = eth_validate_addr,
 150         .ndo_set_mac_address    = eth_mac_addr,
 151         .ndo_change_mtu         = eth_change_mtu,
 152 #ifdef CONFIG_NET_POLL_CONTROLLER
 153         .ndo_poll_controller    = ei_poll,
 154 #endif
 155 };
 156
 157 static int __devinit zorro8390_init(struct net_device *dev,
 158                                     unsigned long board, const char *name,
 159                                     unsigned long ioaddr)
 160 {
 161     int i;
 162     int err;
 163     unsigned char SA_prom[32];
 164     int start_page, stop_page;
 165     static u32 zorro8390_offsets[16] = {
 166         0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e,
 167         0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e,
 168     };
 169
 170     /* Reset card. Who knows what dain-bramaged state it was left in. */
 171     {
 172         unsigned long reset_start_time = jiffies;
 173
 174         z_writeb(z_readb(ioaddr + NE_RESET), ioaddr + NE_RESET);
 175
 176         while ((z_readb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
 177             if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
 178                 printk(KERN_WARNING " not found (no reset ack).\n");
 179                 return -ENODEV;
 180             }
 181
 182         z_writeb(0xff, ioaddr + NE_EN0_ISR);            /* Ack all intr. */
 183     }
 184
 185     /* Read the 16 bytes of station address PROM.
 186        We must first initialize registers, similar to NS8390_init(eifdev, 0).
 187        We can't reliably read the SAPROM address without this.
 188        (I learned the hard way!). */
 189     {
 190         struct {
 191             u32 value;
 192             u32 offset;
 193         } program_seq[] = {
 194             {E8390_NODMA+E8390_PAGE0+E8390_STOP, NE_CMD}, /* Select page 0*/
 195             {0x48,      NE_EN0_DCFG},   /* Set byte-wide (0x48) access. */
 196             {0x00,      NE_EN0_RCNTLO}, /* Clear the count regs. */
 197             {0x00,      NE_EN0_RCNTHI},
 198             {0x00,      NE_EN0_IMR},    /* Mask completion irq. */
 199             {0xFF,      NE_EN0_ISR},
 200             {E8390_RXOFF, NE_EN0_RXCR}, /* 0x20  Set to monitor */
 201             {E8390_TXOFF, NE_EN0_TXCR}, /* 0x02  and loopback mode. */
 202             {32,        NE_EN0_RCNTLO},
 203             {0x00,      NE_EN0_RCNTHI},
 204             {0x00,      NE_EN0_RSARLO}, /* DMA starting at 0x0000. */
 205             {0x00,      NE_EN0_RSARHI},
 206             {E8390_RREAD+E8390_START, NE_CMD},
 207         };
 208         for (i = 0; i < ARRAY_SIZE(program_seq); i++) {
 209             z_writeb(program_seq[i].value, ioaddr + program_seq[i].offset);
 210         }
 211     }
 212     for (i = 0; i < 16; i++) {
 213         SA_prom[i] = z_readb(ioaddr + NE_DATAPORT);
 214         (void)z_readb(ioaddr + NE_DATAPORT);
 215     }
 216
 217     /* We must set the 8390 for word mode. */
 218     z_writeb(0x49, ioaddr + NE_EN0_DCFG);
 219     start_page = NESM_START_PG;
 220     stop_page = NESM_STOP_PG;
 221
 222     dev->base_addr = ioaddr;
 223     dev->irq = IRQ_AMIGA_PORTS;
 224
 225     /* Install the Interrupt handler */
 226     i = request_irq(IRQ_AMIGA_PORTS, __ei_interrupt, IRQF_SHARED, DRV_NAME, dev);
 227     if (i) return i;
 228
 229     for(i = 0; i < ETHER_ADDR_LEN; i++)
 230         dev->dev_addr[i] = SA_prom[i];
 231
 232 #ifdef DEBUG
 233     printk("%pM", dev->dev_addr);
 234 #endif
 235
 236     ei_status.name = name;
 237     ei_status.tx_start_page = start_page;
 238     ei_status.stop_page = stop_page;
 239     ei_status.word16 = 1;
 240
 241     ei_status.rx_start_page = start_page + TX_PAGES;
 242
 243     ei_status.reset_8390 = &zorro8390_reset_8390;
 244     ei_status.block_input = &zorro8390_block_input;
 245     ei_status.block_output = &zorro8390_block_output;
 246     ei_status.get_8390_hdr = &zorro8390_get_8390_hdr;
 247     ei_status.reg_offset = zorro8390_offsets;
 248
 249     dev->netdev_ops = &zorro8390_netdev_ops;
 250     __NS8390_init(dev, 0);
 251     err = register_netdev(dev);
 252     if (err) {
 253         free_irq(IRQ_AMIGA_PORTS, dev);
 254         return err;
 255     }
 256
 257     printk(KERN_INFO "%s: %s at 0x%08lx, Ethernet Address %pM\n",
 258            dev->name, name, board, dev->dev_addr);
 259
 260     return 0;
 261 }
 262
 263 static int zorro8390_open(struct net_device *dev)
 264 {
 265     __ei_open(dev);
 266     return 0;
 267 }
 268
 269 static int zorro8390_close(struct net_device *dev)
 270 {
 271     if (ei_debug > 1)
 272         printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name);
 273     __ei_close(dev);
 274     return 0;
 275 }
 276
 277 /* Hard reset the card.  This used to pause for the same period that a
 278    8390 reset command required, but that shouldn't be necessary. */
 279 static void zorro8390_reset_8390(struct net_device *dev)
 280 {
 281     unsigned long reset_start_time = jiffies;
 282
 283     if (ei_debug > 1)
 284         printk(KERN_DEBUG "resetting the 8390 t=%ld...\n", jiffies);
 285
 286     z_writeb(z_readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
 287
 288     ei_status.txing = 0;
 289     ei_status.dmaing = 0;
 290
 291     /* This check _should_not_ be necessary, omit eventually. */
 292     while ((z_readb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
 293         if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
 294             printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n",
 295                    dev->name);
 296             break;
 297         }
 298     z_writeb(ENISR_RESET, NE_BASE + NE_EN0_ISR);        /* Ack intr. */
 299 }
 300
 301 /* Grab the 8390 specific header. Similar to the block_input routine, but
 302    we don't need to be concerned with ring wrap as the header will be at
 303    the start of a page, so we optimize accordingly. */
 304
 305 static void zorro8390_get_8390_hdr(struct net_device *dev,
 306                                    struct e8390_pkt_hdr *hdr, int ring_page)
 307 {
 308     int nic_base = dev->base_addr;
 309     int cnt;
 310     short *ptrs;
 311
 312     /* This *shouldn't* happen. If it does, it's the last thing you'll see */
 313     if (ei_status.dmaing) {
 314         printk(KERN_ERR "%s: DMAing conflict in ne_get_8390_hdr "
 315            "[DMAstat:%d][irqlock:%d].\n", dev->name, ei_status.dmaing,
 316            ei_status.irqlock);
 317         return;
 318     }
 319
 320     ei_status.dmaing |= 0x01;
 321     z_writeb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
 322     z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
 323     z_writeb(sizeof(struct e8390_pkt_hdr), nic_base + NE_EN0_RCNTLO);
 324     z_writeb(0, nic_base + NE_EN0_RCNTHI);
 325     z_writeb(0, nic_base + NE_EN0_RSARLO);              /* On page boundary */
 326     z_writeb(ring_page, nic_base + NE_EN0_RSARHI);
 327     z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
 328
 329     ptrs = (short*)hdr;
 330     for (cnt = 0; cnt < (sizeof(struct e8390_pkt_hdr)>>1); cnt++)
 331         *ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
 332
 333     z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
 334
 335     hdr->count = WORDSWAP(hdr->count);
 336
 337     ei_status.dmaing &= ~0x01;
 338 }
 339
 340 /* Block input and output, similar to the Crynwr packet driver.  If you
 341    are porting to a new ethercard, look at the packet driver source for hints.
 342    The NEx000 doesn't share the on-board packet memory -- you have to put
 343    the packet out through the "remote DMA" dataport using z_writeb. */
 344
 345 static void zorro8390_block_input(struct net_device *dev, int count,
 346                                  struct sk_buff *skb, int ring_offset)
 347 {
 348     int nic_base = dev->base_addr;
 349     char *buf = skb->data;
 350     short *ptrs;
 351     int cnt;
 352
 353     /* This *shouldn't* happen. If it does, it's the last thing you'll see */
 354     if (ei_status.dmaing) {
 355         printk(KERN_ERR "%s: DMAing conflict in ne_block_input "
 356            "[DMAstat:%d][irqlock:%d].\n",
 357            dev->name, ei_status.dmaing, ei_status.irqlock);
 358         return;
 359     }
 360     ei_status.dmaing |= 0x01;
 361     z_writeb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
 362     z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
 363     z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
 364     z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
 365     z_writeb(ring_offset & 0xff, nic_base + NE_EN0_RSARLO);
 366     z_writeb(ring_offset >> 8, nic_base + NE_EN0_RSARHI);
 367     z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
 368     ptrs = (short*)buf;
 369     for (cnt = 0; cnt < (count>>1); cnt++)
 370         *ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
 371     if (count & 0x01)
 372         buf[count-1] = z_readb(NE_BASE + NE_DATAPORT);
 373
 374     z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
 375     ei_status.dmaing &= ~0x01;
 376 }
 377
 378 static void zorro8390_block_output(struct net_device *dev, int count,
 379                                    const unsigned char *buf,
 380                                    const int start_page)
 381 {
 382     int nic_base = NE_BASE;
 383     unsigned long dma_start;
 384     short *ptrs;
 385     int cnt;
 386
 387     /* Round the count up for word writes.  Do we need to do this?
 388        What effect will an odd byte count have on the 8390?
 389        I should check someday. */
 390     if (count & 0x01)
 391         count++;
 392
 393     /* This *shouldn't* happen. If it does, it's the last thing you'll see */
 394     if (ei_status.dmaing) {
 395         printk(KERN_ERR "%s: DMAing conflict in ne_block_output."
 396            "[DMAstat:%d][irqlock:%d]\n", dev->name, ei_status.dmaing,
 397            ei_status.irqlock);
 398         return;
 399     }
 400     ei_status.dmaing |= 0x01;
 401     /* We should already be in page 0, but to be safe... */
 402     z_writeb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
 403
 404     z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
 405
 406    /* Now the normal output. */
 407     z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
 408     z_writeb(count >> 8,   nic_base + NE_EN0_RCNTHI);
 409     z_writeb(0x00, nic_base + NE_EN0_RSARLO);
 410     z_writeb(start_page, nic_base + NE_EN0_RSARHI);
 411
 412     z_writeb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
 413     ptrs = (short*)buf;
 414     for (cnt = 0; cnt < count>>1; cnt++)
 415         z_writew(*ptrs++, NE_BASE+NE_DATAPORT);
 416
 417     dma_start = jiffies;
 418
 419     while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
 420         if (time_after(jiffies, dma_start + 2*HZ/100)) {        /* 20ms */
 421                 printk(KERN_ERR "%s: timeout waiting for Tx RDC.\n",
 422                        dev->name);
 423                 zorro8390_reset_8390(dev);
 424                 __NS8390_init(dev,1);
 425                 break;
 426         }
 427
 428     z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr. */
 429     ei_status.dmaing &= ~0x01;
 430     return;
 431 }
 432
 433 static void __devexit zorro8390_remove_one(struct zorro_dev *z)
 434 {
 435     struct net_device *dev = zorro_get_drvdata(z);
 436
 437     unregister_netdev(dev);
 438     free_irq(IRQ_AMIGA_PORTS, dev);
 439     release_mem_region(ZTWO_PADDR(dev->base_addr), NE_IO_EXTENT*2);
 440     free_netdev(dev);
 441 }
 442
 443 static int __init zorro8390_init_module(void)
 444 {
 445     return zorro_register_driver(&zorro8390_driver);
 446 }
 447
 448 static void __exit zorro8390_cleanup_module(void)
 449 {
 450     zorro_unregister_driver(&zorro8390_driver);
 451 }
 452
 453 module_init(zorro8390_init_module);
 454 module_exit(zorro8390_cleanup_module);
 455
 456 MODULE_LICENSE("GPL");