1 /******************************************************************************
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
32 #include <linux/kernel.h>
33 #include <linux/module.h>
34 #include <linux/init.h>
35 /* TODO: remove include to PCI*.h when no PCI will be needed here */
36 #include <linux/pci.h>
37 #include <linux/pci-aspm.h>
38 #include <linux/slab.h>
39 #include <linux/dma-mapping.h>
40 #include <linux/delay.h>
41 #include <linux/sched.h>
42 #include <linux/skbuff.h>
43 #include <linux/netdevice.h>
44 #include <linux/wireless.h>
45 #include <linux/firmware.h>
46 #include <linux/etherdevice.h>
47 #include <linux/if_arp.h>
49 #include <net/mac80211.h>
51 #include <asm/div64.h>
53 #include "iwl-eeprom.h"
57 #include "iwl-helpers.h"
59 #include "iwl-agn-calib.h"
64 /******************************************************************************
68 ******************************************************************************/
71 * module name, copyright, version, etc.
73 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
75 #ifdef CONFIG_IWLWIFI_DEBUG
81 #define DRV_VERSION IWLWIFI_VERSION VD
84 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
85 MODULE_VERSION(DRV_VERSION
);
86 MODULE_AUTHOR(DRV_COPYRIGHT
" " DRV_AUTHOR
);
87 MODULE_LICENSE("GPL");
89 static int iwlagn_ant_coupling
;
90 static bool iwlagn_bt_ch_announce
= 1;
92 void iwl_update_chain_flags(struct iwl_priv
*priv
)
94 struct iwl_rxon_context
*ctx
;
96 if (priv
->cfg
->ops
->hcmd
->set_rxon_chain
) {
97 for_each_context(priv
, ctx
) {
98 priv
->cfg
->ops
->hcmd
->set_rxon_chain(priv
, ctx
);
99 if (ctx
->active
.rx_chain
!= ctx
->staging
.rx_chain
)
100 iwlagn_commit_rxon(priv
, ctx
);
105 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
106 static void iwl_set_beacon_tim(struct iwl_priv
*priv
,
107 struct iwl_tx_beacon_cmd
*tx_beacon_cmd
,
108 u8
*beacon
, u32 frame_size
)
111 struct ieee80211_mgmt
*mgmt
= (struct ieee80211_mgmt
*)beacon
;
114 * The index is relative to frame start but we start looking at the
115 * variable-length part of the beacon.
117 tim_idx
= mgmt
->u
.beacon
.variable
- beacon
;
119 /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
120 while ((tim_idx
< (frame_size
- 2)) &&
121 (beacon
[tim_idx
] != WLAN_EID_TIM
))
122 tim_idx
+= beacon
[tim_idx
+1] + 2;
124 /* If TIM field was found, set variables */
125 if ((tim_idx
< (frame_size
- 1)) && (beacon
[tim_idx
] == WLAN_EID_TIM
)) {
126 tx_beacon_cmd
->tim_idx
= cpu_to_le16(tim_idx
);
127 tx_beacon_cmd
->tim_size
= beacon
[tim_idx
+1];
129 IWL_WARN(priv
, "Unable to find TIM Element in beacon\n");
132 int iwlagn_send_beacon_cmd(struct iwl_priv
*priv
)
134 struct iwl_tx_beacon_cmd
*tx_beacon_cmd
;
135 struct iwl_host_cmd cmd
= {
136 .id
= REPLY_TX_BEACON
,
143 * We have to set up the TX command, the TX Beacon command, and the
147 lockdep_assert_held(&priv
->mutex
);
149 if (!priv
->beacon_ctx
) {
150 IWL_ERR(priv
, "trying to build beacon w/o beacon context!\n");
154 if (WARN_ON(!priv
->beacon_skb
))
157 /* Allocate beacon command */
158 if (!priv
->beacon_cmd
)
159 priv
->beacon_cmd
= kzalloc(sizeof(*tx_beacon_cmd
), GFP_KERNEL
);
160 tx_beacon_cmd
= priv
->beacon_cmd
;
164 frame_size
= priv
->beacon_skb
->len
;
166 /* Set up TX command fields */
167 tx_beacon_cmd
->tx
.len
= cpu_to_le16((u16
)frame_size
);
168 tx_beacon_cmd
->tx
.sta_id
= priv
->beacon_ctx
->bcast_sta_id
;
169 tx_beacon_cmd
->tx
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
170 tx_beacon_cmd
->tx
.tx_flags
= TX_CMD_FLG_SEQ_CTL_MSK
|
171 TX_CMD_FLG_TSF_MSK
| TX_CMD_FLG_STA_RATE_MSK
;
173 /* Set up TX beacon command fields */
174 iwl_set_beacon_tim(priv
, tx_beacon_cmd
, priv
->beacon_skb
->data
,
177 /* Set up packet rate and flags */
178 rate
= iwl_rate_get_lowest_plcp(priv
, priv
->beacon_ctx
);
179 priv
->mgmt_tx_ant
= iwl_toggle_tx_ant(priv
, priv
->mgmt_tx_ant
,
180 priv
->hw_params
.valid_tx_ant
);
181 rate_flags
= iwl_ant_idx_to_flags(priv
->mgmt_tx_ant
);
182 if ((rate
>= IWL_FIRST_CCK_RATE
) && (rate
<= IWL_LAST_CCK_RATE
))
183 rate_flags
|= RATE_MCS_CCK_MSK
;
184 tx_beacon_cmd
->tx
.rate_n_flags
= iwl_hw_set_rate_n_flags(rate
,
188 cmd
.len
[0] = sizeof(*tx_beacon_cmd
);
189 cmd
.data
[0] = tx_beacon_cmd
;
190 cmd
.dataflags
[0] = IWL_HCMD_DFL_NOCOPY
;
191 cmd
.len
[1] = frame_size
;
192 cmd
.data
[1] = priv
->beacon_skb
->data
;
193 cmd
.dataflags
[1] = IWL_HCMD_DFL_NOCOPY
;
195 return iwl_send_cmd_sync(priv
, &cmd
);
198 static void iwl_bg_beacon_update(struct work_struct
*work
)
200 struct iwl_priv
*priv
=
201 container_of(work
, struct iwl_priv
, beacon_update
);
202 struct sk_buff
*beacon
;
204 mutex_lock(&priv
->mutex
);
205 if (!priv
->beacon_ctx
) {
206 IWL_ERR(priv
, "updating beacon w/o beacon context!\n");
210 if (priv
->beacon_ctx
->vif
->type
!= NL80211_IFTYPE_AP
) {
212 * The ucode will send beacon notifications even in
213 * IBSS mode, but we don't want to process them. But
214 * we need to defer the type check to here due to
215 * requiring locking around the beacon_ctx access.
220 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
221 beacon
= ieee80211_beacon_get(priv
->hw
, priv
->beacon_ctx
->vif
);
223 IWL_ERR(priv
, "update beacon failed -- keeping old\n");
227 /* new beacon skb is allocated every time; dispose previous.*/
228 dev_kfree_skb(priv
->beacon_skb
);
230 priv
->beacon_skb
= beacon
;
232 iwlagn_send_beacon_cmd(priv
);
234 mutex_unlock(&priv
->mutex
);
237 static void iwl_bg_bt_runtime_config(struct work_struct
*work
)
239 struct iwl_priv
*priv
=
240 container_of(work
, struct iwl_priv
, bt_runtime_config
);
242 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
245 /* dont send host command if rf-kill is on */
246 if (!iwl_is_ready_rf(priv
))
248 priv
->cfg
->ops
->hcmd
->send_bt_config(priv
);
251 static void iwl_bg_bt_full_concurrency(struct work_struct
*work
)
253 struct iwl_priv
*priv
=
254 container_of(work
, struct iwl_priv
, bt_full_concurrency
);
255 struct iwl_rxon_context
*ctx
;
257 mutex_lock(&priv
->mutex
);
259 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
262 /* dont send host command if rf-kill is on */
263 if (!iwl_is_ready_rf(priv
))
266 IWL_DEBUG_INFO(priv
, "BT coex in %s mode\n",
267 priv
->bt_full_concurrent
?
268 "full concurrency" : "3-wire");
271 * LQ & RXON updated cmds must be sent before BT Config cmd
272 * to avoid 3-wire collisions
274 for_each_context(priv
, ctx
) {
275 if (priv
->cfg
->ops
->hcmd
->set_rxon_chain
)
276 priv
->cfg
->ops
->hcmd
->set_rxon_chain(priv
, ctx
);
277 iwlagn_commit_rxon(priv
, ctx
);
280 priv
->cfg
->ops
->hcmd
->send_bt_config(priv
);
282 mutex_unlock(&priv
->mutex
);
286 * iwl_bg_statistics_periodic - Timer callback to queue statistics
288 * This callback is provided in order to send a statistics request.
290 * This timer function is continually reset to execute within
291 * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
292 * was received. We need to ensure we receive the statistics in order
293 * to update the temperature used for calibrating the TXPOWER.
295 static void iwl_bg_statistics_periodic(unsigned long data
)
297 struct iwl_priv
*priv
= (struct iwl_priv
*)data
;
299 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
302 /* dont send host command if rf-kill is on */
303 if (!iwl_is_ready_rf(priv
))
306 iwl_send_statistics_request(priv
, CMD_ASYNC
, false);
310 static void iwl_print_cont_event_trace(struct iwl_priv
*priv
, u32 base
,
311 u32 start_idx
, u32 num_events
,
315 u32 ptr
; /* SRAM byte address of log data */
316 u32 ev
, time
, data
; /* event log data */
317 unsigned long reg_flags
;
320 ptr
= base
+ (4 * sizeof(u32
)) + (start_idx
* 2 * sizeof(u32
));
322 ptr
= base
+ (4 * sizeof(u32
)) + (start_idx
* 3 * sizeof(u32
));
324 /* Make sure device is powered up for SRAM reads */
325 spin_lock_irqsave(&priv
->reg_lock
, reg_flags
);
326 if (iwl_grab_nic_access(priv
)) {
327 spin_unlock_irqrestore(&priv
->reg_lock
, reg_flags
);
331 /* Set starting address; reads will auto-increment */
332 iwl_write32(priv
, HBUS_TARG_MEM_RADDR
, ptr
);
336 * "time" is actually "data" for mode 0 (no timestamp).
337 * place event id # at far right for easier visual parsing.
339 for (i
= 0; i
< num_events
; i
++) {
340 ev
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
341 time
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
343 trace_iwlwifi_dev_ucode_cont_event(priv
,
346 data
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
347 trace_iwlwifi_dev_ucode_cont_event(priv
,
351 /* Allow device to power down */
352 iwl_release_nic_access(priv
);
353 spin_unlock_irqrestore(&priv
->reg_lock
, reg_flags
);
356 static void iwl_continuous_event_trace(struct iwl_priv
*priv
)
358 u32 capacity
; /* event log capacity in # entries */
359 u32 base
; /* SRAM byte address of event log header */
360 u32 mode
; /* 0 - no timestamp, 1 - timestamp recorded */
361 u32 num_wraps
; /* # times uCode wrapped to top of log */
362 u32 next_entry
; /* index of next entry to be written by uCode */
364 base
= priv
->device_pointers
.error_event_table
;
365 if (priv
->cfg
->ops
->lib
->is_valid_rtc_data_addr(base
)) {
366 capacity
= iwl_read_targ_mem(priv
, base
);
367 num_wraps
= iwl_read_targ_mem(priv
, base
+ (2 * sizeof(u32
)));
368 mode
= iwl_read_targ_mem(priv
, base
+ (1 * sizeof(u32
)));
369 next_entry
= iwl_read_targ_mem(priv
, base
+ (3 * sizeof(u32
)));
373 if (num_wraps
== priv
->event_log
.num_wraps
) {
374 iwl_print_cont_event_trace(priv
,
375 base
, priv
->event_log
.next_entry
,
376 next_entry
- priv
->event_log
.next_entry
,
378 priv
->event_log
.non_wraps_count
++;
380 if ((num_wraps
- priv
->event_log
.num_wraps
) > 1)
381 priv
->event_log
.wraps_more_count
++;
383 priv
->event_log
.wraps_once_count
++;
384 trace_iwlwifi_dev_ucode_wrap_event(priv
,
385 num_wraps
- priv
->event_log
.num_wraps
,
386 next_entry
, priv
->event_log
.next_entry
);
387 if (next_entry
< priv
->event_log
.next_entry
) {
388 iwl_print_cont_event_trace(priv
, base
,
389 priv
->event_log
.next_entry
,
390 capacity
- priv
->event_log
.next_entry
,
393 iwl_print_cont_event_trace(priv
, base
, 0,
396 iwl_print_cont_event_trace(priv
, base
,
397 next_entry
, capacity
- next_entry
,
400 iwl_print_cont_event_trace(priv
, base
, 0,
404 priv
->event_log
.num_wraps
= num_wraps
;
405 priv
->event_log
.next_entry
= next_entry
;
409 * iwl_bg_ucode_trace - Timer callback to log ucode event
411 * The timer is continually set to execute every
412 * UCODE_TRACE_PERIOD milliseconds after the last timer expired
413 * this function is to perform continuous uCode event logging operation
416 static void iwl_bg_ucode_trace(unsigned long data
)
418 struct iwl_priv
*priv
= (struct iwl_priv
*)data
;
420 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
423 if (priv
->event_log
.ucode_trace
) {
424 iwl_continuous_event_trace(priv
);
425 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
426 mod_timer(&priv
->ucode_trace
,
427 jiffies
+ msecs_to_jiffies(UCODE_TRACE_PERIOD
));
431 static void iwl_bg_tx_flush(struct work_struct
*work
)
433 struct iwl_priv
*priv
=
434 container_of(work
, struct iwl_priv
, tx_flush
);
436 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
439 /* do nothing if rf-kill is on */
440 if (!iwl_is_ready_rf(priv
))
443 IWL_DEBUG_INFO(priv
, "device request: flush all tx frames\n");
444 iwlagn_dev_txfifo_flush(priv
, IWL_DROP_ALL
);
448 * iwl_rx_handle - Main entry function for receiving responses from uCode
450 * Uses the priv->rx_handlers callback function array to invoke
451 * the appropriate handlers, including command responses,
452 * frame-received notifications, and other notifications.
454 static void iwl_rx_handle(struct iwl_priv
*priv
)
456 struct iwl_rx_mem_buffer
*rxb
;
457 struct iwl_rx_packet
*pkt
;
458 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
466 /* uCode's read index (stored in shared DRAM) indicates the last Rx
467 * buffer that the driver may process (last buffer filled by ucode). */
468 r
= le16_to_cpu(rxq
->rb_stts
->closed_rb_num
) & 0x0FFF;
471 /* Rx interrupt, but nothing sent from uCode */
473 IWL_DEBUG_RX(priv
, "r = %d, i = %d\n", r
, i
);
475 /* calculate total frames need to be restock after handling RX */
476 total_empty
= r
- rxq
->write_actual
;
478 total_empty
+= RX_QUEUE_SIZE
;
480 if (total_empty
> (RX_QUEUE_SIZE
/ 2))
488 /* If an RXB doesn't have a Rx queue slot associated with it,
489 * then a bug has been introduced in the queue refilling
490 * routines -- catch it here */
491 if (WARN_ON(rxb
== NULL
)) {
492 i
= (i
+ 1) & RX_QUEUE_MASK
;
496 rxq
->queue
[i
] = NULL
;
498 dma_unmap_page(priv
->bus
.dev
, rxb
->page_dma
,
499 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
503 len
= le32_to_cpu(pkt
->len_n_flags
) & FH_RSCSR_FRAME_SIZE_MSK
;
504 len
+= sizeof(u32
); /* account for status word */
505 trace_iwlwifi_dev_rx(priv
, pkt
, len
);
507 /* Reclaim a command buffer only if this packet is a response
508 * to a (driver-originated) command.
509 * If the packet (e.g. Rx frame) originated from uCode,
510 * there is no command buffer to reclaim.
511 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
512 * but apparently a few don't get set; catch them here. */
513 reclaim
= !(pkt
->hdr
.sequence
& SEQ_RX_FRAME
) &&
514 (pkt
->hdr
.cmd
!= REPLY_RX_PHY_CMD
) &&
515 (pkt
->hdr
.cmd
!= REPLY_RX
) &&
516 (pkt
->hdr
.cmd
!= REPLY_RX_MPDU_CMD
) &&
517 (pkt
->hdr
.cmd
!= REPLY_COMPRESSED_BA
) &&
518 (pkt
->hdr
.cmd
!= STATISTICS_NOTIFICATION
) &&
519 (pkt
->hdr
.cmd
!= REPLY_TX
);
522 * Do the notification wait before RX handlers so
523 * even if the RX handler consumes the RXB we have
524 * access to it in the notification wait entry.
526 if (!list_empty(&priv
->_agn
.notif_waits
)) {
527 struct iwl_notification_wait
*w
;
529 spin_lock(&priv
->_agn
.notif_wait_lock
);
530 list_for_each_entry(w
, &priv
->_agn
.notif_waits
, list
) {
531 if (w
->cmd
== pkt
->hdr
.cmd
) {
534 w
->fn(priv
, pkt
, w
->fn_data
);
537 spin_unlock(&priv
->_agn
.notif_wait_lock
);
539 wake_up_all(&priv
->_agn
.notif_waitq
);
541 if (priv
->pre_rx_handler
)
542 priv
->pre_rx_handler(priv
, rxb
);
544 /* Based on type of command response or notification,
545 * handle those that need handling via function in
546 * rx_handlers table. See iwl_setup_rx_handlers() */
547 if (priv
->rx_handlers
[pkt
->hdr
.cmd
]) {
548 IWL_DEBUG_RX(priv
, "r = %d, i = %d, %s, 0x%02x\n", r
,
549 i
, get_cmd_string(pkt
->hdr
.cmd
), pkt
->hdr
.cmd
);
550 priv
->isr_stats
.rx_handlers
[pkt
->hdr
.cmd
]++;
551 priv
->rx_handlers
[pkt
->hdr
.cmd
] (priv
, rxb
);
553 /* No handling needed */
555 "r %d i %d No handler needed for %s, 0x%02x\n",
556 r
, i
, get_cmd_string(pkt
->hdr
.cmd
),
561 * XXX: After here, we should always check rxb->page
562 * against NULL before touching it or its virtual
563 * memory (pkt). Because some rx_handler might have
564 * already taken or freed the pages.
568 /* Invoke any callbacks, transfer the buffer to caller,
569 * and fire off the (possibly) blocking iwl_send_cmd()
570 * as we reclaim the driver command queue */
572 iwl_tx_cmd_complete(priv
, rxb
);
574 IWL_WARN(priv
, "Claim null rxb?\n");
577 /* Reuse the page if possible. For notification packets and
578 * SKBs that fail to Rx correctly, add them back into the
579 * rx_free list for reuse later. */
580 spin_lock_irqsave(&rxq
->lock
, flags
);
581 if (rxb
->page
!= NULL
) {
582 rxb
->page_dma
= dma_map_page(priv
->bus
.dev
, rxb
->page
,
583 0, PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
585 list_add_tail(&rxb
->list
, &rxq
->rx_free
);
588 list_add_tail(&rxb
->list
, &rxq
->rx_used
);
590 spin_unlock_irqrestore(&rxq
->lock
, flags
);
592 i
= (i
+ 1) & RX_QUEUE_MASK
;
593 /* If there are a lot of unused frames,
594 * restock the Rx queue so ucode wont assert. */
599 iwlagn_rx_replenish_now(priv
);
605 /* Backtrack one entry */
608 iwlagn_rx_replenish_now(priv
);
610 iwlagn_rx_queue_restock(priv
);
613 /* tasklet for iwlagn interrupt */
614 static void iwl_irq_tasklet(struct iwl_priv
*priv
)
620 #ifdef CONFIG_IWLWIFI_DEBUG
624 spin_lock_irqsave(&priv
->lock
, flags
);
626 /* Ack/clear/reset pending uCode interrupts.
627 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
629 /* There is a hardware bug in the interrupt mask function that some
630 * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
631 * they are disabled in the CSR_INT_MASK register. Furthermore the
632 * ICT interrupt handling mechanism has another bug that might cause
633 * these unmasked interrupts fail to be detected. We workaround the
634 * hardware bugs here by ACKing all the possible interrupts so that
635 * interrupt coalescing can still be achieved.
637 iwl_write32(priv
, CSR_INT
, priv
->_agn
.inta
| ~priv
->inta_mask
);
639 inta
= priv
->_agn
.inta
;
641 #ifdef CONFIG_IWLWIFI_DEBUG
642 if (iwl_get_debug_level(priv
) & IWL_DL_ISR
) {
644 inta_mask
= iwl_read32(priv
, CSR_INT_MASK
);
645 IWL_DEBUG_ISR(priv
, "inta 0x%08x, enabled 0x%08x\n ",
650 spin_unlock_irqrestore(&priv
->lock
, flags
);
652 /* saved interrupt in inta variable now we can reset priv->_agn.inta */
655 /* Now service all interrupt bits discovered above. */
656 if (inta
& CSR_INT_BIT_HW_ERR
) {
657 IWL_ERR(priv
, "Hardware error detected. Restarting.\n");
659 /* Tell the device to stop sending interrupts */
660 iwl_disable_interrupts(priv
);
662 priv
->isr_stats
.hw
++;
663 iwl_irq_handle_error(priv
);
665 handled
|= CSR_INT_BIT_HW_ERR
;
670 #ifdef CONFIG_IWLWIFI_DEBUG
671 if (iwl_get_debug_level(priv
) & (IWL_DL_ISR
)) {
672 /* NIC fires this, but we don't use it, redundant with WAKEUP */
673 if (inta
& CSR_INT_BIT_SCD
) {
674 IWL_DEBUG_ISR(priv
, "Scheduler finished to transmit "
675 "the frame/frames.\n");
676 priv
->isr_stats
.sch
++;
679 /* Alive notification via Rx interrupt will do the real work */
680 if (inta
& CSR_INT_BIT_ALIVE
) {
681 IWL_DEBUG_ISR(priv
, "Alive interrupt\n");
682 priv
->isr_stats
.alive
++;
686 /* Safely ignore these bits for debug checks below */
687 inta
&= ~(CSR_INT_BIT_SCD
| CSR_INT_BIT_ALIVE
);
689 /* HW RF KILL switch toggled */
690 if (inta
& CSR_INT_BIT_RF_KILL
) {
692 if (!(iwl_read32(priv
, CSR_GP_CNTRL
) &
693 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
))
696 IWL_WARN(priv
, "RF_KILL bit toggled to %s.\n",
697 hw_rf_kill
? "disable radio" : "enable radio");
699 priv
->isr_stats
.rfkill
++;
701 /* driver only loads ucode once setting the interface up.
702 * the driver allows loading the ucode even if the radio
703 * is killed. Hence update the killswitch state here. The
704 * rfkill handler will care about restarting if needed.
706 if (!test_bit(STATUS_ALIVE
, &priv
->status
)) {
708 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
710 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
711 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
, hw_rf_kill
);
714 handled
|= CSR_INT_BIT_RF_KILL
;
717 /* Chip got too hot and stopped itself */
718 if (inta
& CSR_INT_BIT_CT_KILL
) {
719 IWL_ERR(priv
, "Microcode CT kill error detected.\n");
720 priv
->isr_stats
.ctkill
++;
721 handled
|= CSR_INT_BIT_CT_KILL
;
724 /* Error detected by uCode */
725 if (inta
& CSR_INT_BIT_SW_ERR
) {
726 IWL_ERR(priv
, "Microcode SW error detected. "
727 " Restarting 0x%X.\n", inta
);
728 priv
->isr_stats
.sw
++;
729 iwl_irq_handle_error(priv
);
730 handled
|= CSR_INT_BIT_SW_ERR
;
733 /* uCode wakes up after power-down sleep */
734 if (inta
& CSR_INT_BIT_WAKEUP
) {
735 IWL_DEBUG_ISR(priv
, "Wakeup interrupt\n");
736 iwl_rx_queue_update_write_ptr(priv
, &priv
->rxq
);
737 for (i
= 0; i
< priv
->hw_params
.max_txq_num
; i
++)
738 iwl_txq_update_write_ptr(priv
, &priv
->txq
[i
]);
740 priv
->isr_stats
.wakeup
++;
742 handled
|= CSR_INT_BIT_WAKEUP
;
745 /* All uCode command responses, including Tx command responses,
746 * Rx "responses" (frame-received notification), and other
747 * notifications from uCode come through here*/
748 if (inta
& (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
|
749 CSR_INT_BIT_RX_PERIODIC
)) {
750 IWL_DEBUG_ISR(priv
, "Rx interrupt\n");
751 if (inta
& (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
)) {
752 handled
|= (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
);
753 iwl_write32(priv
, CSR_FH_INT_STATUS
,
756 if (inta
& CSR_INT_BIT_RX_PERIODIC
) {
757 handled
|= CSR_INT_BIT_RX_PERIODIC
;
758 iwl_write32(priv
, CSR_INT
, CSR_INT_BIT_RX_PERIODIC
);
760 /* Sending RX interrupt require many steps to be done in the
762 * 1- write interrupt to current index in ICT table.
764 * 3- update RX shared data to indicate last write index.
766 * This could lead to RX race, driver could receive RX interrupt
767 * but the shared data changes does not reflect this;
768 * periodic interrupt will detect any dangling Rx activity.
771 /* Disable periodic interrupt; we use it as just a one-shot. */
772 iwl_write8(priv
, CSR_INT_PERIODIC_REG
,
773 CSR_INT_PERIODIC_DIS
);
777 * Enable periodic interrupt in 8 msec only if we received
778 * real RX interrupt (instead of just periodic int), to catch
779 * any dangling Rx interrupt. If it was just the periodic
780 * interrupt, there was no dangling Rx activity, and no need
781 * to extend the periodic interrupt; one-shot is enough.
783 if (inta
& (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
))
784 iwl_write8(priv
, CSR_INT_PERIODIC_REG
,
785 CSR_INT_PERIODIC_ENA
);
787 priv
->isr_stats
.rx
++;
790 /* This "Tx" DMA channel is used only for loading uCode */
791 if (inta
& CSR_INT_BIT_FH_TX
) {
792 iwl_write32(priv
, CSR_FH_INT_STATUS
, CSR_FH_INT_TX_MASK
);
793 IWL_DEBUG_ISR(priv
, "uCode load interrupt\n");
794 priv
->isr_stats
.tx
++;
795 handled
|= CSR_INT_BIT_FH_TX
;
796 /* Wake up uCode load routine, now that load is complete */
797 priv
->ucode_write_complete
= 1;
798 wake_up_interruptible(&priv
->wait_command_queue
);
801 if (inta
& ~handled
) {
802 IWL_ERR(priv
, "Unhandled INTA bits 0x%08x\n", inta
& ~handled
);
803 priv
->isr_stats
.unhandled
++;
806 if (inta
& ~(priv
->inta_mask
)) {
807 IWL_WARN(priv
, "Disabled INTA bits 0x%08x were pending\n",
808 inta
& ~priv
->inta_mask
);
811 /* Re-enable all interrupts */
812 /* only Re-enable if disabled by irq */
813 if (test_bit(STATUS_INT_ENABLED
, &priv
->status
))
814 iwl_enable_interrupts(priv
);
815 /* Re-enable RF_KILL if it occurred */
816 else if (handled
& CSR_INT_BIT_RF_KILL
)
817 iwl_enable_rfkill_int(priv
);
820 /*****************************************************************************
824 *****************************************************************************/
826 #ifdef CONFIG_IWLWIFI_DEBUG
829 * The following adds a new attribute to the sysfs representation
830 * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
831 * used for controlling the debug level.
833 * See the level definitions in iwl for details.
835 * The debug_level being managed using sysfs below is a per device debug
836 * level that is used instead of the global debug level if it (the per
837 * device debug level) is set.
839 static ssize_t
show_debug_level(struct device
*d
,
840 struct device_attribute
*attr
, char *buf
)
842 struct iwl_priv
*priv
= dev_get_drvdata(d
);
843 return sprintf(buf
, "0x%08X\n", iwl_get_debug_level(priv
));
845 static ssize_t
store_debug_level(struct device
*d
,
846 struct device_attribute
*attr
,
847 const char *buf
, size_t count
)
849 struct iwl_priv
*priv
= dev_get_drvdata(d
);
853 ret
= strict_strtoul(buf
, 0, &val
);
855 IWL_ERR(priv
, "%s is not in hex or decimal form.\n", buf
);
857 priv
->debug_level
= val
;
858 if (iwl_alloc_traffic_mem(priv
))
860 "Not enough memory to generate traffic log\n");
862 return strnlen(buf
, count
);
865 static DEVICE_ATTR(debug_level
, S_IWUSR
| S_IRUGO
,
866 show_debug_level
, store_debug_level
);
869 #endif /* CONFIG_IWLWIFI_DEBUG */
872 static ssize_t
show_temperature(struct device
*d
,
873 struct device_attribute
*attr
, char *buf
)
875 struct iwl_priv
*priv
= dev_get_drvdata(d
);
877 if (!iwl_is_alive(priv
))
880 return sprintf(buf
, "%d\n", priv
->temperature
);
883 static DEVICE_ATTR(temperature
, S_IRUGO
, show_temperature
, NULL
);
885 static ssize_t
show_tx_power(struct device
*d
,
886 struct device_attribute
*attr
, char *buf
)
888 struct iwl_priv
*priv
= dev_get_drvdata(d
);
890 if (!iwl_is_ready_rf(priv
))
891 return sprintf(buf
, "off\n");
893 return sprintf(buf
, "%d\n", priv
->tx_power_user_lmt
);
896 static ssize_t
store_tx_power(struct device
*d
,
897 struct device_attribute
*attr
,
898 const char *buf
, size_t count
)
900 struct iwl_priv
*priv
= dev_get_drvdata(d
);
904 ret
= strict_strtoul(buf
, 10, &val
);
906 IWL_INFO(priv
, "%s is not in decimal form.\n", buf
);
908 ret
= iwl_set_tx_power(priv
, val
, false);
910 IWL_ERR(priv
, "failed setting tx power (0x%d).\n",
918 static DEVICE_ATTR(tx_power
, S_IWUSR
| S_IRUGO
, show_tx_power
, store_tx_power
);
920 static struct attribute
*iwl_sysfs_entries
[] = {
921 &dev_attr_temperature
.attr
,
922 &dev_attr_tx_power
.attr
,
923 #ifdef CONFIG_IWLWIFI_DEBUG
924 &dev_attr_debug_level
.attr
,
929 static struct attribute_group iwl_attribute_group
= {
930 .name
= NULL
, /* put in device directory */
931 .attrs
= iwl_sysfs_entries
,
934 /******************************************************************************
936 * uCode download functions
938 ******************************************************************************/
940 static void iwl_free_fw_desc(struct iwl_priv
*priv
, struct fw_desc
*desc
)
943 dma_free_coherent(priv
->bus
.dev
, desc
->len
,
944 desc
->v_addr
, desc
->p_addr
);
949 static void iwl_free_fw_img(struct iwl_priv
*priv
, struct fw_img
*img
)
951 iwl_free_fw_desc(priv
, &img
->code
);
952 iwl_free_fw_desc(priv
, &img
->data
);
955 static void iwl_dealloc_ucode(struct iwl_priv
*priv
)
957 iwl_free_fw_img(priv
, &priv
->ucode_rt
);
958 iwl_free_fw_img(priv
, &priv
->ucode_init
);
961 static int iwl_alloc_fw_desc(struct iwl_priv
*priv
, struct fw_desc
*desc
,
962 const void *data
, size_t len
)
969 desc
->v_addr
= dma_alloc_coherent(priv
->bus
.dev
, len
,
970 &desc
->p_addr
, GFP_KERNEL
);
975 memcpy(desc
->v_addr
, data
, len
);
979 struct iwlagn_ucode_capabilities
{
980 u32 max_probe_length
;
981 u32 standard_phy_calibration_size
;
985 static void iwl_ucode_callback(const struct firmware
*ucode_raw
, void *context
);
986 static int iwl_mac_setup_register(struct iwl_priv
*priv
,
987 struct iwlagn_ucode_capabilities
*capa
);
989 #define UCODE_EXPERIMENTAL_INDEX 100
990 #define UCODE_EXPERIMENTAL_TAG "exp"
992 static int __must_check
iwl_request_firmware(struct iwl_priv
*priv
, bool first
)
994 const char *name_pre
= priv
->cfg
->fw_name_pre
;
998 #ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
999 priv
->fw_index
= UCODE_EXPERIMENTAL_INDEX
;
1000 strcpy(tag
, UCODE_EXPERIMENTAL_TAG
);
1001 } else if (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
) {
1003 priv
->fw_index
= priv
->cfg
->ucode_api_max
;
1004 sprintf(tag
, "%d", priv
->fw_index
);
1007 sprintf(tag
, "%d", priv
->fw_index
);
1010 if (priv
->fw_index
< priv
->cfg
->ucode_api_min
) {
1011 IWL_ERR(priv
, "no suitable firmware found!\n");
1015 sprintf(priv
->firmware_name
, "%s%s%s", name_pre
, tag
, ".ucode");
1017 IWL_DEBUG_INFO(priv
, "attempting to load firmware %s'%s'\n",
1018 (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
)
1019 ? "EXPERIMENTAL " : "",
1020 priv
->firmware_name
);
1022 return request_firmware_nowait(THIS_MODULE
, 1, priv
->firmware_name
,
1024 GFP_KERNEL
, priv
, iwl_ucode_callback
);
1027 struct iwlagn_firmware_pieces
{
1028 const void *inst
, *data
, *init
, *init_data
;
1029 size_t inst_size
, data_size
, init_size
, init_data_size
;
1033 u32 init_evtlog_ptr
, init_evtlog_size
, init_errlog_ptr
;
1034 u32 inst_evtlog_ptr
, inst_evtlog_size
, inst_errlog_ptr
;
1037 static int iwlagn_load_legacy_firmware(struct iwl_priv
*priv
,
1038 const struct firmware
*ucode_raw
,
1039 struct iwlagn_firmware_pieces
*pieces
)
1041 struct iwl_ucode_header
*ucode
= (void *)ucode_raw
->data
;
1042 u32 api_ver
, hdr_size
;
1045 priv
->ucode_ver
= le32_to_cpu(ucode
->ver
);
1046 api_ver
= IWL_UCODE_API(priv
->ucode_ver
);
1051 if (ucode_raw
->size
< hdr_size
) {
1052 IWL_ERR(priv
, "File size too small!\n");
1055 pieces
->build
= le32_to_cpu(ucode
->u
.v2
.build
);
1056 pieces
->inst_size
= le32_to_cpu(ucode
->u
.v2
.inst_size
);
1057 pieces
->data_size
= le32_to_cpu(ucode
->u
.v2
.data_size
);
1058 pieces
->init_size
= le32_to_cpu(ucode
->u
.v2
.init_size
);
1059 pieces
->init_data_size
= le32_to_cpu(ucode
->u
.v2
.init_data_size
);
1060 src
= ucode
->u
.v2
.data
;
1066 if (ucode_raw
->size
< hdr_size
) {
1067 IWL_ERR(priv
, "File size too small!\n");
1071 pieces
->inst_size
= le32_to_cpu(ucode
->u
.v1
.inst_size
);
1072 pieces
->data_size
= le32_to_cpu(ucode
->u
.v1
.data_size
);
1073 pieces
->init_size
= le32_to_cpu(ucode
->u
.v1
.init_size
);
1074 pieces
->init_data_size
= le32_to_cpu(ucode
->u
.v1
.init_data_size
);
1075 src
= ucode
->u
.v1
.data
;
1079 /* Verify size of file vs. image size info in file's header */
1080 if (ucode_raw
->size
!= hdr_size
+ pieces
->inst_size
+
1081 pieces
->data_size
+ pieces
->init_size
+
1082 pieces
->init_data_size
) {
1085 "uCode file size %d does not match expected size\n",
1086 (int)ucode_raw
->size
);
1091 src
+= pieces
->inst_size
;
1093 src
+= pieces
->data_size
;
1095 src
+= pieces
->init_size
;
1096 pieces
->init_data
= src
;
1097 src
+= pieces
->init_data_size
;
1102 static int iwlagn_wanted_ucode_alternative
= 1;
1104 static int iwlagn_load_firmware(struct iwl_priv
*priv
,
1105 const struct firmware
*ucode_raw
,
1106 struct iwlagn_firmware_pieces
*pieces
,
1107 struct iwlagn_ucode_capabilities
*capa
)
1109 struct iwl_tlv_ucode_header
*ucode
= (void *)ucode_raw
->data
;
1110 struct iwl_ucode_tlv
*tlv
;
1111 size_t len
= ucode_raw
->size
;
1113 int wanted_alternative
= iwlagn_wanted_ucode_alternative
, tmp
;
1116 enum iwl_ucode_tlv_type tlv_type
;
1119 if (len
< sizeof(*ucode
)) {
1120 IWL_ERR(priv
, "uCode has invalid length: %zd\n", len
);
1124 if (ucode
->magic
!= cpu_to_le32(IWL_TLV_UCODE_MAGIC
)) {
1125 IWL_ERR(priv
, "invalid uCode magic: 0X%x\n",
1126 le32_to_cpu(ucode
->magic
));
1131 * Check which alternatives are present, and "downgrade"
1132 * when the chosen alternative is not present, warning
1133 * the user when that happens. Some files may not have
1134 * any alternatives, so don't warn in that case.
1136 alternatives
= le64_to_cpu(ucode
->alternatives
);
1137 tmp
= wanted_alternative
;
1138 if (wanted_alternative
> 63)
1139 wanted_alternative
= 63;
1140 while (wanted_alternative
&& !(alternatives
& BIT(wanted_alternative
)))
1141 wanted_alternative
--;
1142 if (wanted_alternative
&& wanted_alternative
!= tmp
)
1144 "uCode alternative %d not available, choosing %d\n",
1145 tmp
, wanted_alternative
);
1147 priv
->ucode_ver
= le32_to_cpu(ucode
->ver
);
1148 pieces
->build
= le32_to_cpu(ucode
->build
);
1151 len
-= sizeof(*ucode
);
1153 while (len
>= sizeof(*tlv
)) {
1156 len
-= sizeof(*tlv
);
1159 tlv_len
= le32_to_cpu(tlv
->length
);
1160 tlv_type
= le16_to_cpu(tlv
->type
);
1161 tlv_alt
= le16_to_cpu(tlv
->alternative
);
1162 tlv_data
= tlv
->data
;
1164 if (len
< tlv_len
) {
1165 IWL_ERR(priv
, "invalid TLV len: %zd/%u\n",
1169 len
-= ALIGN(tlv_len
, 4);
1170 data
+= sizeof(*tlv
) + ALIGN(tlv_len
, 4);
1173 * Alternative 0 is always valid.
1175 * Skip alternative TLVs that are not selected.
1177 if (tlv_alt
!= 0 && tlv_alt
!= wanted_alternative
)
1181 case IWL_UCODE_TLV_INST
:
1182 pieces
->inst
= tlv_data
;
1183 pieces
->inst_size
= tlv_len
;
1185 case IWL_UCODE_TLV_DATA
:
1186 pieces
->data
= tlv_data
;
1187 pieces
->data_size
= tlv_len
;
1189 case IWL_UCODE_TLV_INIT
:
1190 pieces
->init
= tlv_data
;
1191 pieces
->init_size
= tlv_len
;
1193 case IWL_UCODE_TLV_INIT_DATA
:
1194 pieces
->init_data
= tlv_data
;
1195 pieces
->init_data_size
= tlv_len
;
1197 case IWL_UCODE_TLV_BOOT
:
1198 IWL_ERR(priv
, "Found unexpected BOOT ucode\n");
1200 case IWL_UCODE_TLV_PROBE_MAX_LEN
:
1201 if (tlv_len
!= sizeof(u32
))
1202 goto invalid_tlv_len
;
1203 capa
->max_probe_length
=
1204 le32_to_cpup((__le32
*)tlv_data
);
1206 case IWL_UCODE_TLV_PAN
:
1208 goto invalid_tlv_len
;
1209 capa
->flags
|= IWL_UCODE_TLV_FLAGS_PAN
;
1211 case IWL_UCODE_TLV_FLAGS
:
1212 /* must be at least one u32 */
1213 if (tlv_len
< sizeof(u32
))
1214 goto invalid_tlv_len
;
1215 /* and a proper number of u32s */
1216 if (tlv_len
% sizeof(u32
))
1217 goto invalid_tlv_len
;
1219 * This driver only reads the first u32 as
1220 * right now no more features are defined,
1221 * if that changes then either the driver
1222 * will not work with the new firmware, or
1223 * it'll not take advantage of new features.
1225 capa
->flags
= le32_to_cpup((__le32
*)tlv_data
);
1227 case IWL_UCODE_TLV_INIT_EVTLOG_PTR
:
1228 if (tlv_len
!= sizeof(u32
))
1229 goto invalid_tlv_len
;
1230 pieces
->init_evtlog_ptr
=
1231 le32_to_cpup((__le32
*)tlv_data
);
1233 case IWL_UCODE_TLV_INIT_EVTLOG_SIZE
:
1234 if (tlv_len
!= sizeof(u32
))
1235 goto invalid_tlv_len
;
1236 pieces
->init_evtlog_size
=
1237 le32_to_cpup((__le32
*)tlv_data
);
1239 case IWL_UCODE_TLV_INIT_ERRLOG_PTR
:
1240 if (tlv_len
!= sizeof(u32
))
1241 goto invalid_tlv_len
;
1242 pieces
->init_errlog_ptr
=
1243 le32_to_cpup((__le32
*)tlv_data
);
1245 case IWL_UCODE_TLV_RUNT_EVTLOG_PTR
:
1246 if (tlv_len
!= sizeof(u32
))
1247 goto invalid_tlv_len
;
1248 pieces
->inst_evtlog_ptr
=
1249 le32_to_cpup((__le32
*)tlv_data
);
1251 case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE
:
1252 if (tlv_len
!= sizeof(u32
))
1253 goto invalid_tlv_len
;
1254 pieces
->inst_evtlog_size
=
1255 le32_to_cpup((__le32
*)tlv_data
);
1257 case IWL_UCODE_TLV_RUNT_ERRLOG_PTR
:
1258 if (tlv_len
!= sizeof(u32
))
1259 goto invalid_tlv_len
;
1260 pieces
->inst_errlog_ptr
=
1261 le32_to_cpup((__le32
*)tlv_data
);
1263 case IWL_UCODE_TLV_ENHANCE_SENS_TBL
:
1265 goto invalid_tlv_len
;
1266 priv
->enhance_sensitivity_table
= true;
1268 case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE
:
1269 if (tlv_len
!= sizeof(u32
))
1270 goto invalid_tlv_len
;
1271 capa
->standard_phy_calibration_size
=
1272 le32_to_cpup((__le32
*)tlv_data
);
1275 IWL_DEBUG_INFO(priv
, "unknown TLV: %d\n", tlv_type
);
1281 IWL_ERR(priv
, "invalid TLV after parsing: %zd\n", len
);
1282 iwl_print_hex_dump(priv
, IWL_DL_FW
, (u8
*)data
, len
);
1289 IWL_ERR(priv
, "TLV %d has invalid size: %u\n", tlv_type
, tlv_len
);
1290 iwl_print_hex_dump(priv
, IWL_DL_FW
, tlv_data
, tlv_len
);
1296 * iwl_ucode_callback - callback when firmware was loaded
1298 * If loaded successfully, copies the firmware into buffers
1299 * for the card to fetch (via DMA).
1301 static void iwl_ucode_callback(const struct firmware
*ucode_raw
, void *context
)
1303 struct iwl_priv
*priv
= context
;
1304 struct iwl_ucode_header
*ucode
;
1306 struct iwlagn_firmware_pieces pieces
;
1307 const unsigned int api_max
= priv
->cfg
->ucode_api_max
;
1308 const unsigned int api_min
= priv
->cfg
->ucode_api_min
;
1312 struct iwlagn_ucode_capabilities ucode_capa
= {
1313 .max_probe_length
= 200,
1314 .standard_phy_calibration_size
=
1315 IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE
,
1318 memset(&pieces
, 0, sizeof(pieces
));
1321 if (priv
->fw_index
<= priv
->cfg
->ucode_api_max
)
1323 "request for firmware file '%s' failed.\n",
1324 priv
->firmware_name
);
1328 IWL_DEBUG_INFO(priv
, "Loaded firmware file '%s' (%zd bytes).\n",
1329 priv
->firmware_name
, ucode_raw
->size
);
1331 /* Make sure that we got at least the API version number */
1332 if (ucode_raw
->size
< 4) {
1333 IWL_ERR(priv
, "File size way too small!\n");
1337 /* Data from ucode file: header followed by uCode images */
1338 ucode
= (struct iwl_ucode_header
*)ucode_raw
->data
;
1341 err
= iwlagn_load_legacy_firmware(priv
, ucode_raw
, &pieces
);
1343 err
= iwlagn_load_firmware(priv
, ucode_raw
, &pieces
,
1349 api_ver
= IWL_UCODE_API(priv
->ucode_ver
);
1350 build
= pieces
.build
;
1353 * api_ver should match the api version forming part of the
1354 * firmware filename ... but we don't check for that and only rely
1355 * on the API version read from firmware header from here on forward
1357 /* no api version check required for experimental uCode */
1358 if (priv
->fw_index
!= UCODE_EXPERIMENTAL_INDEX
) {
1359 if (api_ver
< api_min
|| api_ver
> api_max
) {
1361 "Driver unable to support your firmware API. "
1362 "Driver supports v%u, firmware is v%u.\n",
1367 if (api_ver
!= api_max
)
1369 "Firmware has old API version. Expected v%u, "
1370 "got v%u. New firmware can be obtained "
1371 "from http://www.intellinuxwireless.org.\n",
1376 sprintf(buildstr
, " build %u%s", build
,
1377 (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
)
1382 IWL_INFO(priv
, "loaded firmware version %u.%u.%u.%u%s\n",
1383 IWL_UCODE_MAJOR(priv
->ucode_ver
),
1384 IWL_UCODE_MINOR(priv
->ucode_ver
),
1385 IWL_UCODE_API(priv
->ucode_ver
),
1386 IWL_UCODE_SERIAL(priv
->ucode_ver
),
1389 snprintf(priv
->hw
->wiphy
->fw_version
,
1390 sizeof(priv
->hw
->wiphy
->fw_version
),
1392 IWL_UCODE_MAJOR(priv
->ucode_ver
),
1393 IWL_UCODE_MINOR(priv
->ucode_ver
),
1394 IWL_UCODE_API(priv
->ucode_ver
),
1395 IWL_UCODE_SERIAL(priv
->ucode_ver
),
1399 * For any of the failures below (before allocating pci memory)
1400 * we will try to load a version with a smaller API -- maybe the
1401 * user just got a corrupted version of the latest API.
1404 IWL_DEBUG_INFO(priv
, "f/w package hdr ucode version raw = 0x%x\n",
1406 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime inst size = %Zd\n",
1408 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime data size = %Zd\n",
1410 IWL_DEBUG_INFO(priv
, "f/w package hdr init inst size = %Zd\n",
1412 IWL_DEBUG_INFO(priv
, "f/w package hdr init data size = %Zd\n",
1413 pieces
.init_data_size
);
1415 /* Verify that uCode images will fit in card's SRAM */
1416 if (pieces
.inst_size
> priv
->hw_params
.max_inst_size
) {
1417 IWL_ERR(priv
, "uCode instr len %Zd too large to fit in\n",
1422 if (pieces
.data_size
> priv
->hw_params
.max_data_size
) {
1423 IWL_ERR(priv
, "uCode data len %Zd too large to fit in\n",
1428 if (pieces
.init_size
> priv
->hw_params
.max_inst_size
) {
1429 IWL_ERR(priv
, "uCode init instr len %Zd too large to fit in\n",
1434 if (pieces
.init_data_size
> priv
->hw_params
.max_data_size
) {
1435 IWL_ERR(priv
, "uCode init data len %Zd too large to fit in\n",
1436 pieces
.init_data_size
);
1440 /* Allocate ucode buffers for card's bus-master loading ... */
1442 /* Runtime instructions and 2 copies of data:
1443 * 1) unmodified from disk
1444 * 2) backup cache for save/restore during power-downs */
1445 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_rt
.code
,
1446 pieces
.inst
, pieces
.inst_size
))
1448 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_rt
.data
,
1449 pieces
.data
, pieces
.data_size
))
1452 /* Initialization instructions and data */
1453 if (pieces
.init_size
&& pieces
.init_data_size
) {
1454 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_init
.code
,
1455 pieces
.init
, pieces
.init_size
))
1457 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_init
.data
,
1458 pieces
.init_data
, pieces
.init_data_size
))
1462 /* Now that we can no longer fail, copy information */
1465 * The (size - 16) / 12 formula is based on the information recorded
1466 * for each event, which is of mode 1 (including timestamp) for all
1467 * new microcodes that include this information.
1469 priv
->_agn
.init_evtlog_ptr
= pieces
.init_evtlog_ptr
;
1470 if (pieces
.init_evtlog_size
)
1471 priv
->_agn
.init_evtlog_size
= (pieces
.init_evtlog_size
- 16)/12;
1473 priv
->_agn
.init_evtlog_size
=
1474 priv
->cfg
->base_params
->max_event_log_size
;
1475 priv
->_agn
.init_errlog_ptr
= pieces
.init_errlog_ptr
;
1476 priv
->_agn
.inst_evtlog_ptr
= pieces
.inst_evtlog_ptr
;
1477 if (pieces
.inst_evtlog_size
)
1478 priv
->_agn
.inst_evtlog_size
= (pieces
.inst_evtlog_size
- 16)/12;
1480 priv
->_agn
.inst_evtlog_size
=
1481 priv
->cfg
->base_params
->max_event_log_size
;
1482 priv
->_agn
.inst_errlog_ptr
= pieces
.inst_errlog_ptr
;
1484 priv
->new_scan_threshold_behaviour
=
1485 !!(ucode_capa
.flags
& IWL_UCODE_TLV_FLAGS_NEWSCAN
);
1487 if ((priv
->cfg
->sku
& EEPROM_SKU_CAP_IPAN_ENABLE
) &&
1488 (ucode_capa
.flags
& IWL_UCODE_TLV_FLAGS_PAN
)) {
1489 priv
->valid_contexts
|= BIT(IWL_RXON_CTX_PAN
);
1490 priv
->sta_key_max_num
= STA_KEY_MAX_NUM_PAN
;
1492 priv
->sta_key_max_num
= STA_KEY_MAX_NUM
;
1494 if (priv
->valid_contexts
!= BIT(IWL_RXON_CTX_BSS
))
1495 priv
->cmd_queue
= IWL_IPAN_CMD_QUEUE_NUM
;
1497 priv
->cmd_queue
= IWL_DEFAULT_CMD_QUEUE_NUM
;
1500 * figure out the offset of chain noise reset and gain commands
1501 * base on the size of standard phy calibration commands table size
1503 if (ucode_capa
.standard_phy_calibration_size
>
1504 IWL_MAX_PHY_CALIBRATE_TBL_SIZE
)
1505 ucode_capa
.standard_phy_calibration_size
=
1506 IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE
;
1508 priv
->_agn
.phy_calib_chain_noise_reset_cmd
=
1509 ucode_capa
.standard_phy_calibration_size
;
1510 priv
->_agn
.phy_calib_chain_noise_gain_cmd
=
1511 ucode_capa
.standard_phy_calibration_size
+ 1;
1513 /**************************************************
1514 * This is still part of probe() in a sense...
1516 * 9. Setup and register with mac80211 and debugfs
1517 **************************************************/
1518 err
= iwl_mac_setup_register(priv
, &ucode_capa
);
1522 err
= iwl_dbgfs_register(priv
, DRV_NAME
);
1524 IWL_ERR(priv
, "failed to create debugfs files. Ignoring error: %d\n", err
);
1526 err
= sysfs_create_group(&(priv
->bus
.dev
->kobj
),
1527 &iwl_attribute_group
);
1529 IWL_ERR(priv
, "failed to create sysfs device attributes\n");
1533 /* We have our copies now, allow OS release its copies */
1534 release_firmware(ucode_raw
);
1535 complete(&priv
->_agn
.firmware_loading_complete
);
1539 /* try next, if any */
1540 if (iwl_request_firmware(priv
, false))
1542 release_firmware(ucode_raw
);
1546 IWL_ERR(priv
, "failed to allocate pci memory\n");
1547 iwl_dealloc_ucode(priv
);
1549 complete(&priv
->_agn
.firmware_loading_complete
);
1550 device_release_driver(priv
->bus
.dev
);
1551 release_firmware(ucode_raw
);
1554 static const char *desc_lookup_text
[] = {
1559 "NMI_INTERRUPT_WDG",
1563 "HW_ERROR_TUNE_LOCK",
1564 "HW_ERROR_TEMPERATURE",
1565 "ILLEGAL_CHAN_FREQ",
1568 "NMI_INTERRUPT_HOST",
1569 "NMI_INTERRUPT_ACTION_PT",
1570 "NMI_INTERRUPT_UNKNOWN",
1571 "UCODE_VERSION_MISMATCH",
1572 "HW_ERROR_ABS_LOCK",
1573 "HW_ERROR_CAL_LOCK_FAIL",
1574 "NMI_INTERRUPT_INST_ACTION_PT",
1575 "NMI_INTERRUPT_DATA_ACTION_PT",
1577 "NMI_INTERRUPT_TRM",
1578 "NMI_INTERRUPT_BREAK_POINT"
1585 static struct { char *name
; u8 num
; } advanced_lookup
[] = {
1586 { "NMI_INTERRUPT_WDG", 0x34 },
1587 { "SYSASSERT", 0x35 },
1588 { "UCODE_VERSION_MISMATCH", 0x37 },
1589 { "BAD_COMMAND", 0x38 },
1590 { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
1591 { "FATAL_ERROR", 0x3D },
1592 { "NMI_TRM_HW_ERR", 0x46 },
1593 { "NMI_INTERRUPT_TRM", 0x4C },
1594 { "NMI_INTERRUPT_BREAK_POINT", 0x54 },
1595 { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
1596 { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
1597 { "NMI_INTERRUPT_HOST", 0x66 },
1598 { "NMI_INTERRUPT_ACTION_PT", 0x7C },
1599 { "NMI_INTERRUPT_UNKNOWN", 0x84 },
1600 { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
1601 { "ADVANCED_SYSASSERT", 0 },
1604 static const char *desc_lookup(u32 num
)
1607 int max
= ARRAY_SIZE(desc_lookup_text
);
1610 return desc_lookup_text
[num
];
1612 max
= ARRAY_SIZE(advanced_lookup
) - 1;
1613 for (i
= 0; i
< max
; i
++) {
1614 if (advanced_lookup
[i
].num
== num
)
1617 return advanced_lookup
[i
].name
;
1620 #define ERROR_START_OFFSET (1 * sizeof(u32))
1621 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
1623 void iwl_dump_nic_error_log(struct iwl_priv
*priv
)
1626 struct iwl_error_event_table table
;
1628 base
= priv
->device_pointers
.error_event_table
;
1629 if (priv
->ucode_type
== IWL_UCODE_INIT
) {
1631 base
= priv
->_agn
.init_errlog_ptr
;
1634 base
= priv
->_agn
.inst_errlog_ptr
;
1637 if (!priv
->cfg
->ops
->lib
->is_valid_rtc_data_addr(base
)) {
1639 "Not valid error log pointer 0x%08X for %s uCode\n",
1641 (priv
->ucode_type
== IWL_UCODE_INIT
)
1646 iwl_read_targ_mem_words(priv
, base
, &table
, sizeof(table
));
1648 if (ERROR_START_OFFSET
<= table
.valid
* ERROR_ELEM_SIZE
) {
1649 IWL_ERR(priv
, "Start IWL Error Log Dump:\n");
1650 IWL_ERR(priv
, "Status: 0x%08lX, count: %d\n",
1651 priv
->status
, table
.valid
);
1654 priv
->isr_stats
.err_code
= table
.error_id
;
1656 trace_iwlwifi_dev_ucode_error(priv
, table
.error_id
, table
.tsf_low
,
1657 table
.data1
, table
.data2
, table
.line
,
1658 table
.blink1
, table
.blink2
, table
.ilink1
,
1659 table
.ilink2
, table
.bcon_time
, table
.gp1
,
1660 table
.gp2
, table
.gp3
, table
.ucode_ver
,
1661 table
.hw_ver
, table
.brd_ver
);
1662 IWL_ERR(priv
, "0x%08X | %-28s\n", table
.error_id
,
1663 desc_lookup(table
.error_id
));
1664 IWL_ERR(priv
, "0x%08X | uPc\n", table
.pc
);
1665 IWL_ERR(priv
, "0x%08X | branchlink1\n", table
.blink1
);
1666 IWL_ERR(priv
, "0x%08X | branchlink2\n", table
.blink2
);
1667 IWL_ERR(priv
, "0x%08X | interruptlink1\n", table
.ilink1
);
1668 IWL_ERR(priv
, "0x%08X | interruptlink2\n", table
.ilink2
);
1669 IWL_ERR(priv
, "0x%08X | data1\n", table
.data1
);
1670 IWL_ERR(priv
, "0x%08X | data2\n", table
.data2
);
1671 IWL_ERR(priv
, "0x%08X | line\n", table
.line
);
1672 IWL_ERR(priv
, "0x%08X | beacon time\n", table
.bcon_time
);
1673 IWL_ERR(priv
, "0x%08X | tsf low\n", table
.tsf_low
);
1674 IWL_ERR(priv
, "0x%08X | tsf hi\n", table
.tsf_hi
);
1675 IWL_ERR(priv
, "0x%08X | time gp1\n", table
.gp1
);
1676 IWL_ERR(priv
, "0x%08X | time gp2\n", table
.gp2
);
1677 IWL_ERR(priv
, "0x%08X | time gp3\n", table
.gp3
);
1678 IWL_ERR(priv
, "0x%08X | uCode version\n", table
.ucode_ver
);
1679 IWL_ERR(priv
, "0x%08X | hw version\n", table
.hw_ver
);
1680 IWL_ERR(priv
, "0x%08X | board version\n", table
.brd_ver
);
1681 IWL_ERR(priv
, "0x%08X | hcmd\n", table
.hcmd
);
1684 #define EVENT_START_OFFSET (4 * sizeof(u32))
1687 * iwl_print_event_log - Dump error event log to syslog
1690 static int iwl_print_event_log(struct iwl_priv
*priv
, u32 start_idx
,
1691 u32 num_events
, u32 mode
,
1692 int pos
, char **buf
, size_t bufsz
)
1695 u32 base
; /* SRAM byte address of event log header */
1696 u32 event_size
; /* 2 u32s, or 3 u32s if timestamp recorded */
1697 u32 ptr
; /* SRAM byte address of log data */
1698 u32 ev
, time
, data
; /* event log data */
1699 unsigned long reg_flags
;
1701 if (num_events
== 0)
1704 base
= priv
->device_pointers
.log_event_table
;
1705 if (priv
->ucode_type
== IWL_UCODE_INIT
) {
1707 base
= priv
->_agn
.init_evtlog_ptr
;
1710 base
= priv
->_agn
.inst_evtlog_ptr
;
1714 event_size
= 2 * sizeof(u32
);
1716 event_size
= 3 * sizeof(u32
);
1718 ptr
= base
+ EVENT_START_OFFSET
+ (start_idx
* event_size
);
1720 /* Make sure device is powered up for SRAM reads */
1721 spin_lock_irqsave(&priv
->reg_lock
, reg_flags
);
1722 iwl_grab_nic_access(priv
);
1724 /* Set starting address; reads will auto-increment */
1725 iwl_write32(priv
, HBUS_TARG_MEM_RADDR
, ptr
);
1728 /* "time" is actually "data" for mode 0 (no timestamp).
1729 * place event id # at far right for easier visual parsing. */
1730 for (i
= 0; i
< num_events
; i
++) {
1731 ev
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
1732 time
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
1736 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
1737 "EVT_LOG:0x%08x:%04u\n",
1740 trace_iwlwifi_dev_ucode_event(priv
, 0,
1742 IWL_ERR(priv
, "EVT_LOG:0x%08x:%04u\n",
1746 data
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
1748 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
1749 "EVT_LOGT:%010u:0x%08x:%04u\n",
1752 IWL_ERR(priv
, "EVT_LOGT:%010u:0x%08x:%04u\n",
1754 trace_iwlwifi_dev_ucode_event(priv
, time
,
1760 /* Allow device to power down */
1761 iwl_release_nic_access(priv
);
1762 spin_unlock_irqrestore(&priv
->reg_lock
, reg_flags
);
1767 * iwl_print_last_event_logs - Dump the newest # of event log to syslog
1769 static int iwl_print_last_event_logs(struct iwl_priv
*priv
, u32 capacity
,
1770 u32 num_wraps
, u32 next_entry
,
1772 int pos
, char **buf
, size_t bufsz
)
1775 * display the newest DEFAULT_LOG_ENTRIES entries
1776 * i.e the entries just before the next ont that uCode would fill.
1779 if (next_entry
< size
) {
1780 pos
= iwl_print_event_log(priv
,
1781 capacity
- (size
- next_entry
),
1782 size
- next_entry
, mode
,
1784 pos
= iwl_print_event_log(priv
, 0,
1788 pos
= iwl_print_event_log(priv
, next_entry
- size
,
1789 size
, mode
, pos
, buf
, bufsz
);
1791 if (next_entry
< size
) {
1792 pos
= iwl_print_event_log(priv
, 0, next_entry
,
1793 mode
, pos
, buf
, bufsz
);
1795 pos
= iwl_print_event_log(priv
, next_entry
- size
,
1796 size
, mode
, pos
, buf
, bufsz
);
1802 #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
1804 int iwl_dump_nic_event_log(struct iwl_priv
*priv
, bool full_log
,
1805 char **buf
, bool display
)
1807 u32 base
; /* SRAM byte address of event log header */
1808 u32 capacity
; /* event log capacity in # entries */
1809 u32 mode
; /* 0 - no timestamp, 1 - timestamp recorded */
1810 u32 num_wraps
; /* # times uCode wrapped to top of log */
1811 u32 next_entry
; /* index of next entry to be written by uCode */
1812 u32 size
; /* # entries that we'll print */
1817 base
= priv
->device_pointers
.log_event_table
;
1818 if (priv
->ucode_type
== IWL_UCODE_INIT
) {
1819 logsize
= priv
->_agn
.init_evtlog_size
;
1821 base
= priv
->_agn
.init_evtlog_ptr
;
1823 logsize
= priv
->_agn
.inst_evtlog_size
;
1825 base
= priv
->_agn
.inst_evtlog_ptr
;
1828 if (!priv
->cfg
->ops
->lib
->is_valid_rtc_data_addr(base
)) {
1830 "Invalid event log pointer 0x%08X for %s uCode\n",
1832 (priv
->ucode_type
== IWL_UCODE_INIT
)
1837 /* event log header */
1838 capacity
= iwl_read_targ_mem(priv
, base
);
1839 mode
= iwl_read_targ_mem(priv
, base
+ (1 * sizeof(u32
)));
1840 num_wraps
= iwl_read_targ_mem(priv
, base
+ (2 * sizeof(u32
)));
1841 next_entry
= iwl_read_targ_mem(priv
, base
+ (3 * sizeof(u32
)));
1843 if (capacity
> logsize
) {
1844 IWL_ERR(priv
, "Log capacity %d is bogus, limit to %d entries\n",
1849 if (next_entry
> logsize
) {
1850 IWL_ERR(priv
, "Log write index %d is bogus, limit to %d\n",
1851 next_entry
, logsize
);
1852 next_entry
= logsize
;
1855 size
= num_wraps
? capacity
: next_entry
;
1857 /* bail out if nothing in log */
1859 IWL_ERR(priv
, "Start IWL Event Log Dump: nothing in log\n");
1863 /* enable/disable bt channel inhibition */
1864 priv
->bt_ch_announce
= iwlagn_bt_ch_announce
;
1866 #ifdef CONFIG_IWLWIFI_DEBUG
1867 if (!(iwl_get_debug_level(priv
) & IWL_DL_FW_ERRORS
) && !full_log
)
1868 size
= (size
> DEFAULT_DUMP_EVENT_LOG_ENTRIES
)
1869 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES
: size
;
1871 size
= (size
> DEFAULT_DUMP_EVENT_LOG_ENTRIES
)
1872 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES
: size
;
1874 IWL_ERR(priv
, "Start IWL Event Log Dump: display last %u entries\n",
1877 #ifdef CONFIG_IWLWIFI_DEBUG
1880 bufsz
= capacity
* 48;
1883 *buf
= kmalloc(bufsz
, GFP_KERNEL
);
1887 if ((iwl_get_debug_level(priv
) & IWL_DL_FW_ERRORS
) || full_log
) {
1889 * if uCode has wrapped back to top of log,
1890 * start at the oldest entry,
1891 * i.e the next one that uCode would fill.
1894 pos
= iwl_print_event_log(priv
, next_entry
,
1895 capacity
- next_entry
, mode
,
1897 /* (then/else) start at top of log */
1898 pos
= iwl_print_event_log(priv
, 0,
1899 next_entry
, mode
, pos
, buf
, bufsz
);
1901 pos
= iwl_print_last_event_logs(priv
, capacity
, num_wraps
,
1902 next_entry
, size
, mode
,
1905 pos
= iwl_print_last_event_logs(priv
, capacity
, num_wraps
,
1906 next_entry
, size
, mode
,
1912 static void iwl_rf_kill_ct_config(struct iwl_priv
*priv
)
1914 struct iwl_ct_kill_config cmd
;
1915 struct iwl_ct_kill_throttling_config adv_cmd
;
1916 unsigned long flags
;
1919 spin_lock_irqsave(&priv
->lock
, flags
);
1920 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
,
1921 CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT
);
1922 spin_unlock_irqrestore(&priv
->lock
, flags
);
1923 priv
->thermal_throttle
.ct_kill_toggle
= false;
1925 if (priv
->cfg
->base_params
->support_ct_kill_exit
) {
1926 adv_cmd
.critical_temperature_enter
=
1927 cpu_to_le32(priv
->hw_params
.ct_kill_threshold
);
1928 adv_cmd
.critical_temperature_exit
=
1929 cpu_to_le32(priv
->hw_params
.ct_kill_exit_threshold
);
1931 ret
= iwl_send_cmd_pdu(priv
, REPLY_CT_KILL_CONFIG_CMD
,
1932 sizeof(adv_cmd
), &adv_cmd
);
1934 IWL_ERR(priv
, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1936 IWL_DEBUG_INFO(priv
, "REPLY_CT_KILL_CONFIG_CMD "
1938 "critical temperature enter is %d,"
1940 priv
->hw_params
.ct_kill_threshold
,
1941 priv
->hw_params
.ct_kill_exit_threshold
);
1943 cmd
.critical_temperature_R
=
1944 cpu_to_le32(priv
->hw_params
.ct_kill_threshold
);
1946 ret
= iwl_send_cmd_pdu(priv
, REPLY_CT_KILL_CONFIG_CMD
,
1949 IWL_ERR(priv
, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1951 IWL_DEBUG_INFO(priv
, "REPLY_CT_KILL_CONFIG_CMD "
1953 "critical temperature is %d\n",
1954 priv
->hw_params
.ct_kill_threshold
);
1958 static int iwlagn_send_calib_cfg_rt(struct iwl_priv
*priv
, u32 cfg
)
1960 struct iwl_calib_cfg_cmd calib_cfg_cmd
;
1961 struct iwl_host_cmd cmd
= {
1962 .id
= CALIBRATION_CFG_CMD
,
1963 .len
= { sizeof(struct iwl_calib_cfg_cmd
), },
1964 .data
= { &calib_cfg_cmd
, },
1967 memset(&calib_cfg_cmd
, 0, sizeof(calib_cfg_cmd
));
1968 calib_cfg_cmd
.ucd_calib_cfg
.once
.is_enable
= IWL_CALIB_INIT_CFG_ALL
;
1969 calib_cfg_cmd
.ucd_calib_cfg
.once
.start
= cpu_to_le32(cfg
);
1971 return iwl_send_cmd(priv
, &cmd
);
1976 * iwl_alive_start - called after REPLY_ALIVE notification received
1977 * from protocol/runtime uCode (initialization uCode's
1978 * Alive gets handled by iwl_init_alive_start()).
1980 int iwl_alive_start(struct iwl_priv
*priv
)
1983 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
1985 iwl_reset_ict(priv
);
1987 IWL_DEBUG_INFO(priv
, "Runtime Alive received.\n");
1989 /* After the ALIVE response, we can send host commands to the uCode */
1990 set_bit(STATUS_ALIVE
, &priv
->status
);
1992 /* Enable watchdog to monitor the driver tx queues */
1993 iwl_setup_watchdog(priv
);
1995 if (iwl_is_rfkill(priv
))
1998 /* download priority table before any calibration request */
1999 if (priv
->cfg
->bt_params
&&
2000 priv
->cfg
->bt_params
->advanced_bt_coexist
) {
2001 /* Configure Bluetooth device coexistence support */
2002 priv
->bt_valid
= IWLAGN_BT_ALL_VALID_MSK
;
2003 priv
->kill_ack_mask
= IWLAGN_BT_KILL_ACK_MASK_DEFAULT
;
2004 priv
->kill_cts_mask
= IWLAGN_BT_KILL_CTS_MASK_DEFAULT
;
2005 priv
->cfg
->ops
->hcmd
->send_bt_config(priv
);
2006 priv
->bt_valid
= IWLAGN_BT_VALID_ENABLE_FLAGS
;
2007 iwlagn_send_prio_tbl(priv
);
2009 /* FIXME: w/a to force change uCode BT state machine */
2010 ret
= iwlagn_send_bt_env(priv
, IWL_BT_COEX_ENV_OPEN
,
2011 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2
);
2014 ret
= iwlagn_send_bt_env(priv
, IWL_BT_COEX_ENV_CLOSE
,
2015 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2
);
2019 if (priv
->hw_params
.calib_rt_cfg
)
2020 iwlagn_send_calib_cfg_rt(priv
, priv
->hw_params
.calib_rt_cfg
);
2022 ieee80211_wake_queues(priv
->hw
);
2024 priv
->active_rate
= IWL_RATES_MASK
;
2026 /* Configure Tx antenna selection based on H/W config */
2027 if (priv
->cfg
->ops
->hcmd
->set_tx_ant
)
2028 priv
->cfg
->ops
->hcmd
->set_tx_ant(priv
, priv
->cfg
->valid_tx_ant
);
2030 if (iwl_is_associated_ctx(ctx
)) {
2031 struct iwl_rxon_cmd
*active_rxon
=
2032 (struct iwl_rxon_cmd
*)&ctx
->active
;
2033 /* apply any changes in staging */
2034 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
2035 active_rxon
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
2037 struct iwl_rxon_context
*tmp
;
2038 /* Initialize our rx_config data */
2039 for_each_context(priv
, tmp
)
2040 iwl_connection_init_rx_config(priv
, tmp
);
2042 if (priv
->cfg
->ops
->hcmd
->set_rxon_chain
)
2043 priv
->cfg
->ops
->hcmd
->set_rxon_chain(priv
, ctx
);
2046 if (!priv
->cfg
->bt_params
|| (priv
->cfg
->bt_params
&&
2047 !priv
->cfg
->bt_params
->advanced_bt_coexist
)) {
2049 * default is 2-wire BT coexexistence support
2051 priv
->cfg
->ops
->hcmd
->send_bt_config(priv
);
2054 iwl_reset_run_time_calib(priv
);
2056 set_bit(STATUS_READY
, &priv
->status
);
2058 /* Configure the adapter for unassociated operation */
2059 ret
= iwlagn_commit_rxon(priv
, ctx
);
2063 /* At this point, the NIC is initialized and operational */
2064 iwl_rf_kill_ct_config(priv
);
2066 IWL_DEBUG_INFO(priv
, "ALIVE processing complete.\n");
2068 return iwl_power_update_mode(priv
, true);
2071 static void iwl_cancel_deferred_work(struct iwl_priv
*priv
);
2073 static void __iwl_down(struct iwl_priv
*priv
)
2077 IWL_DEBUG_INFO(priv
, DRV_NAME
" is going down\n");
2079 iwl_scan_cancel_timeout(priv
, 200);
2081 exit_pending
= test_and_set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2083 /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
2084 * to prevent rearm timer */
2085 del_timer_sync(&priv
->watchdog
);
2087 iwl_clear_ucode_stations(priv
, NULL
);
2088 iwl_dealloc_bcast_stations(priv
);
2089 iwl_clear_driver_stations(priv
);
2091 /* reset BT coex data */
2092 priv
->bt_status
= 0;
2093 if (priv
->cfg
->bt_params
)
2094 priv
->bt_traffic_load
=
2095 priv
->cfg
->bt_params
->bt_init_traffic_load
;
2097 priv
->bt_traffic_load
= 0;
2098 priv
->bt_full_concurrent
= false;
2099 priv
->bt_ci_compliance
= 0;
2101 /* Wipe out the EXIT_PENDING status bit if we are not actually
2102 * exiting the module */
2104 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2106 if (priv
->mac80211_registered
)
2107 ieee80211_stop_queues(priv
->hw
);
2109 /* Clear out all status bits but a few that are stable across reset */
2110 priv
->status
&= test_bit(STATUS_RF_KILL_HW
, &priv
->status
) <<
2112 test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) <<
2113 STATUS_GEO_CONFIGURED
|
2114 test_bit(STATUS_FW_ERROR
, &priv
->status
) <<
2116 test_bit(STATUS_EXIT_PENDING
, &priv
->status
) <<
2117 STATUS_EXIT_PENDING
;
2119 iwlagn_stop_device(priv
);
2121 dev_kfree_skb(priv
->beacon_skb
);
2122 priv
->beacon_skb
= NULL
;
2125 static void iwl_down(struct iwl_priv
*priv
)
2127 mutex_lock(&priv
->mutex
);
2129 mutex_unlock(&priv
->mutex
);
2131 iwl_cancel_deferred_work(priv
);
2134 #define HW_READY_TIMEOUT (50)
2136 /* Note: returns poll_bit return value, which is >= 0 if success */
2137 static int iwl_set_hw_ready(struct iwl_priv
*priv
)
2141 iwl_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
2142 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY
);
2144 /* See if we got it */
2145 ret
= iwl_poll_bit(priv
, CSR_HW_IF_CONFIG_REG
,
2146 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY
,
2147 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY
,
2150 IWL_DEBUG_INFO(priv
, "hardware%s ready\n", ret
< 0 ? " not" : "");
2154 /* Note: returns standard 0/-ERROR code */
2155 int iwl_prepare_card_hw(struct iwl_priv
*priv
)
2159 IWL_DEBUG_INFO(priv
, "iwl_prepare_card_hw enter\n");
2161 ret
= iwl_set_hw_ready(priv
);
2165 /* If HW is not ready, prepare the conditions to check again */
2166 iwl_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
2167 CSR_HW_IF_CONFIG_REG_PREPARE
);
2169 ret
= iwl_poll_bit(priv
, CSR_HW_IF_CONFIG_REG
,
2170 ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE
,
2171 CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE
, 150000);
2176 /* HW should be ready by now, check again. */
2177 ret
= iwl_set_hw_ready(priv
);
2183 #define MAX_HW_RESTARTS 5
2185 static int __iwl_up(struct iwl_priv
*priv
)
2187 struct iwl_rxon_context
*ctx
;
2190 lockdep_assert_held(&priv
->mutex
);
2192 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
2193 IWL_WARN(priv
, "Exit pending; will not bring the NIC up\n");
2197 for_each_context(priv
, ctx
) {
2198 ret
= iwlagn_alloc_bcast_station(priv
, ctx
);
2200 iwl_dealloc_bcast_stations(priv
);
2205 ret
= iwlagn_run_init_ucode(priv
);
2207 IWL_ERR(priv
, "Failed to run INIT ucode: %d\n", ret
);
2211 ret
= iwlagn_load_ucode_wait_alive(priv
,
2215 IWL_ERR(priv
, "Failed to start RT ucode: %d\n", ret
);
2219 ret
= iwl_alive_start(priv
);
2225 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2227 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2229 IWL_ERR(priv
, "Unable to initialize device.\n");
2234 /*****************************************************************************
2236 * Workqueue callbacks
2238 *****************************************************************************/
2240 static void iwl_bg_run_time_calib_work(struct work_struct
*work
)
2242 struct iwl_priv
*priv
= container_of(work
, struct iwl_priv
,
2243 run_time_calib_work
);
2245 mutex_lock(&priv
->mutex
);
2247 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
) ||
2248 test_bit(STATUS_SCANNING
, &priv
->status
)) {
2249 mutex_unlock(&priv
->mutex
);
2253 if (priv
->start_calib
) {
2254 iwl_chain_noise_calibration(priv
);
2255 iwl_sensitivity_calibration(priv
);
2258 mutex_unlock(&priv
->mutex
);
2261 static void iwlagn_prepare_restart(struct iwl_priv
*priv
)
2263 struct iwl_rxon_context
*ctx
;
2264 bool bt_full_concurrent
;
2265 u8 bt_ci_compliance
;
2269 lockdep_assert_held(&priv
->mutex
);
2271 for_each_context(priv
, ctx
)
2276 * __iwl_down() will clear the BT status variables,
2277 * which is correct, but when we restart we really
2278 * want to keep them so restore them afterwards.
2280 * The restart process will later pick them up and
2281 * re-configure the hw when we reconfigure the BT
2284 bt_full_concurrent
= priv
->bt_full_concurrent
;
2285 bt_ci_compliance
= priv
->bt_ci_compliance
;
2286 bt_load
= priv
->bt_traffic_load
;
2287 bt_status
= priv
->bt_status
;
2291 priv
->bt_full_concurrent
= bt_full_concurrent
;
2292 priv
->bt_ci_compliance
= bt_ci_compliance
;
2293 priv
->bt_traffic_load
= bt_load
;
2294 priv
->bt_status
= bt_status
;
2297 static void iwl_bg_restart(struct work_struct
*data
)
2299 struct iwl_priv
*priv
= container_of(data
, struct iwl_priv
, restart
);
2301 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2304 if (test_and_clear_bit(STATUS_FW_ERROR
, &priv
->status
)) {
2305 mutex_lock(&priv
->mutex
);
2306 iwlagn_prepare_restart(priv
);
2307 mutex_unlock(&priv
->mutex
);
2308 iwl_cancel_deferred_work(priv
);
2309 ieee80211_restart_hw(priv
->hw
);
2315 static void iwl_bg_rx_replenish(struct work_struct
*data
)
2317 struct iwl_priv
*priv
=
2318 container_of(data
, struct iwl_priv
, rx_replenish
);
2320 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2323 mutex_lock(&priv
->mutex
);
2324 iwlagn_rx_replenish(priv
);
2325 mutex_unlock(&priv
->mutex
);
2328 static int iwl_mac_offchannel_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
,
2329 struct ieee80211_channel
*chan
,
2330 enum nl80211_channel_type channel_type
,
2333 struct iwl_priv
*priv
= hw
->priv
;
2336 /* Not supported if we don't have PAN */
2337 if (!(priv
->valid_contexts
& BIT(IWL_RXON_CTX_PAN
))) {
2342 /* Not supported on pre-P2P firmware */
2343 if (!(priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
&
2344 BIT(NL80211_IFTYPE_P2P_CLIENT
))) {
2349 mutex_lock(&priv
->mutex
);
2351 if (!priv
->contexts
[IWL_RXON_CTX_PAN
].is_active
) {
2353 * If the PAN context is free, use the normal
2354 * way of doing remain-on-channel offload + TX.
2360 /* TODO: queue up if scanning? */
2361 if (test_bit(STATUS_SCANNING
, &priv
->status
) ||
2362 priv
->_agn
.offchan_tx_skb
) {
2368 * max_scan_ie_len doesn't include the blank SSID or the header,
2369 * so need to add that again here.
2371 if (skb
->len
> hw
->wiphy
->max_scan_ie_len
+ 24 + 2) {
2376 priv
->_agn
.offchan_tx_skb
= skb
;
2377 priv
->_agn
.offchan_tx_timeout
= wait
;
2378 priv
->_agn
.offchan_tx_chan
= chan
;
2380 ret
= iwl_scan_initiate(priv
, priv
->contexts
[IWL_RXON_CTX_PAN
].vif
,
2381 IWL_SCAN_OFFCH_TX
, chan
->band
);
2383 priv
->_agn
.offchan_tx_skb
= NULL
;
2385 mutex_unlock(&priv
->mutex
);
2393 static int iwl_mac_offchannel_tx_cancel_wait(struct ieee80211_hw
*hw
)
2395 struct iwl_priv
*priv
= hw
->priv
;
2398 mutex_lock(&priv
->mutex
);
2400 if (!priv
->_agn
.offchan_tx_skb
) {
2405 priv
->_agn
.offchan_tx_skb
= NULL
;
2407 ret
= iwl_scan_cancel_timeout(priv
, 200);
2411 mutex_unlock(&priv
->mutex
);
2416 /*****************************************************************************
2418 * mac80211 entry point functions
2420 *****************************************************************************/
2422 static const struct ieee80211_iface_limit iwlagn_sta_ap_limits
[] = {
2425 .types
= BIT(NL80211_IFTYPE_STATION
),
2429 .types
= BIT(NL80211_IFTYPE_AP
),
2433 static const struct ieee80211_iface_limit iwlagn_2sta_limits
[] = {
2436 .types
= BIT(NL80211_IFTYPE_STATION
),
2440 static const struct ieee80211_iface_limit iwlagn_p2p_sta_go_limits
[] = {
2443 .types
= BIT(NL80211_IFTYPE_STATION
),
2447 .types
= BIT(NL80211_IFTYPE_P2P_GO
) |
2448 BIT(NL80211_IFTYPE_AP
),
2452 static const struct ieee80211_iface_limit iwlagn_p2p_2sta_limits
[] = {
2455 .types
= BIT(NL80211_IFTYPE_STATION
),
2459 .types
= BIT(NL80211_IFTYPE_P2P_CLIENT
),
2463 static const struct ieee80211_iface_combination
2464 iwlagn_iface_combinations_dualmode
[] = {
2465 { .num_different_channels
= 1,
2466 .max_interfaces
= 2,
2467 .beacon_int_infra_match
= true,
2468 .limits
= iwlagn_sta_ap_limits
,
2469 .n_limits
= ARRAY_SIZE(iwlagn_sta_ap_limits
),
2471 { .num_different_channels
= 1,
2472 .max_interfaces
= 2,
2473 .limits
= iwlagn_2sta_limits
,
2474 .n_limits
= ARRAY_SIZE(iwlagn_2sta_limits
),
2478 static const struct ieee80211_iface_combination
2479 iwlagn_iface_combinations_p2p
[] = {
2480 { .num_different_channels
= 1,
2481 .max_interfaces
= 2,
2482 .beacon_int_infra_match
= true,
2483 .limits
= iwlagn_p2p_sta_go_limits
,
2484 .n_limits
= ARRAY_SIZE(iwlagn_p2p_sta_go_limits
),
2486 { .num_different_channels
= 1,
2487 .max_interfaces
= 2,
2488 .limits
= iwlagn_p2p_2sta_limits
,
2489 .n_limits
= ARRAY_SIZE(iwlagn_p2p_2sta_limits
),
2494 * Not a mac80211 entry point function, but it fits in with all the
2495 * other mac80211 functions grouped here.
2497 static int iwl_mac_setup_register(struct iwl_priv
*priv
,
2498 struct iwlagn_ucode_capabilities
*capa
)
2501 struct ieee80211_hw
*hw
= priv
->hw
;
2502 struct iwl_rxon_context
*ctx
;
2504 hw
->rate_control_algorithm
= "iwl-agn-rs";
2506 /* Tell mac80211 our characteristics */
2507 hw
->flags
= IEEE80211_HW_SIGNAL_DBM
|
2508 IEEE80211_HW_AMPDU_AGGREGATION
|
2509 IEEE80211_HW_NEED_DTIM_PERIOD
|
2510 IEEE80211_HW_SPECTRUM_MGMT
|
2511 IEEE80211_HW_REPORTS_TX_ACK_STATUS
;
2513 hw
->max_tx_aggregation_subframes
= LINK_QUAL_AGG_FRAME_LIMIT_DEF
;
2515 hw
->flags
|= IEEE80211_HW_SUPPORTS_PS
|
2516 IEEE80211_HW_SUPPORTS_DYNAMIC_PS
;
2518 if (priv
->cfg
->sku
& EEPROM_SKU_CAP_11N_ENABLE
)
2519 hw
->flags
|= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS
|
2520 IEEE80211_HW_SUPPORTS_STATIC_SMPS
;
2522 if (capa
->flags
& IWL_UCODE_TLV_FLAGS_MFP
)
2523 hw
->flags
|= IEEE80211_HW_MFP_CAPABLE
;
2525 hw
->sta_data_size
= sizeof(struct iwl_station_priv
);
2526 hw
->vif_data_size
= sizeof(struct iwl_vif_priv
);
2528 for_each_context(priv
, ctx
) {
2529 hw
->wiphy
->interface_modes
|= ctx
->interface_modes
;
2530 hw
->wiphy
->interface_modes
|= ctx
->exclusive_interface_modes
;
2533 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
2535 if (hw
->wiphy
->interface_modes
& BIT(NL80211_IFTYPE_P2P_CLIENT
)) {
2536 hw
->wiphy
->iface_combinations
= iwlagn_iface_combinations_p2p
;
2537 hw
->wiphy
->n_iface_combinations
=
2538 ARRAY_SIZE(iwlagn_iface_combinations_p2p
);
2539 } else if (hw
->wiphy
->interface_modes
& BIT(NL80211_IFTYPE_AP
)) {
2540 hw
->wiphy
->iface_combinations
= iwlagn_iface_combinations_dualmode
;
2541 hw
->wiphy
->n_iface_combinations
=
2542 ARRAY_SIZE(iwlagn_iface_combinations_dualmode
);
2545 hw
->wiphy
->max_remain_on_channel_duration
= 1000;
2547 hw
->wiphy
->flags
|= WIPHY_FLAG_CUSTOM_REGULATORY
|
2548 WIPHY_FLAG_DISABLE_BEACON_HINTS
|
2549 WIPHY_FLAG_IBSS_RSN
;
2552 * For now, disable PS by default because it affects
2553 * RX performance significantly.
2555 hw
->wiphy
->flags
&= ~WIPHY_FLAG_PS_ON_BY_DEFAULT
;
2557 hw
->wiphy
->max_scan_ssids
= PROBE_OPTION_MAX
;
2558 /* we create the 802.11 header and a zero-length SSID element */
2559 hw
->wiphy
->max_scan_ie_len
= capa
->max_probe_length
- 24 - 2;
2561 /* Default value; 4 EDCA QOS priorities */
2564 hw
->max_listen_interval
= IWL_CONN_MAX_LISTEN_INTERVAL
;
2566 if (priv
->bands
[IEEE80211_BAND_2GHZ
].n_channels
)
2567 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] =
2568 &priv
->bands
[IEEE80211_BAND_2GHZ
];
2569 if (priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
)
2570 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_5GHZ
] =
2571 &priv
->bands
[IEEE80211_BAND_5GHZ
];
2573 iwl_leds_init(priv
);
2575 ret
= ieee80211_register_hw(priv
->hw
);
2577 IWL_ERR(priv
, "Failed to register hw (error %d)\n", ret
);
2580 priv
->mac80211_registered
= 1;
2586 static int iwlagn_mac_start(struct ieee80211_hw
*hw
)
2588 struct iwl_priv
*priv
= hw
->priv
;
2591 IWL_DEBUG_MAC80211(priv
, "enter\n");
2593 /* we should be verifying the device is ready to be opened */
2594 mutex_lock(&priv
->mutex
);
2595 ret
= __iwl_up(priv
);
2596 mutex_unlock(&priv
->mutex
);
2600 IWL_DEBUG_INFO(priv
, "Start UP work done.\n");
2602 /* Now we should be done, and the READY bit should be set. */
2603 if (WARN_ON(!test_bit(STATUS_READY
, &priv
->status
)))
2606 iwlagn_led_enable(priv
);
2609 IWL_DEBUG_MAC80211(priv
, "leave\n");
2613 static void iwlagn_mac_stop(struct ieee80211_hw
*hw
)
2615 struct iwl_priv
*priv
= hw
->priv
;
2617 IWL_DEBUG_MAC80211(priv
, "enter\n");
2626 flush_workqueue(priv
->workqueue
);
2628 /* User space software may expect getting rfkill changes
2629 * even if interface is down */
2630 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
2631 iwl_enable_rfkill_int(priv
);
2633 IWL_DEBUG_MAC80211(priv
, "leave\n");
2636 static void iwlagn_mac_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
2638 struct iwl_priv
*priv
= hw
->priv
;
2640 IWL_DEBUG_MACDUMP(priv
, "enter\n");
2642 IWL_DEBUG_TX(priv
, "dev->xmit(%d bytes) at rate 0x%02x\n", skb
->len
,
2643 ieee80211_get_tx_rate(hw
, IEEE80211_SKB_CB(skb
))->bitrate
);
2645 if (iwlagn_tx_skb(priv
, skb
))
2646 dev_kfree_skb_any(skb
);
2648 IWL_DEBUG_MACDUMP(priv
, "leave\n");
2651 static void iwlagn_mac_update_tkip_key(struct ieee80211_hw
*hw
,
2652 struct ieee80211_vif
*vif
,
2653 struct ieee80211_key_conf
*keyconf
,
2654 struct ieee80211_sta
*sta
,
2655 u32 iv32
, u16
*phase1key
)
2657 struct iwl_priv
*priv
= hw
->priv
;
2658 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
2660 IWL_DEBUG_MAC80211(priv
, "enter\n");
2662 iwl_update_tkip_key(priv
, vif_priv
->ctx
, keyconf
, sta
,
2665 IWL_DEBUG_MAC80211(priv
, "leave\n");
2668 static int iwlagn_mac_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
2669 struct ieee80211_vif
*vif
,
2670 struct ieee80211_sta
*sta
,
2671 struct ieee80211_key_conf
*key
)
2673 struct iwl_priv
*priv
= hw
->priv
;
2674 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
2675 struct iwl_rxon_context
*ctx
= vif_priv
->ctx
;
2678 bool is_default_wep_key
= false;
2680 IWL_DEBUG_MAC80211(priv
, "enter\n");
2682 if (iwlagn_mod_params
.sw_crypto
) {
2683 IWL_DEBUG_MAC80211(priv
, "leave - hwcrypto disabled\n");
2688 * To support IBSS RSN, don't program group keys in IBSS, the
2689 * hardware will then not attempt to decrypt the frames.
2691 if (vif
->type
== NL80211_IFTYPE_ADHOC
&&
2692 !(key
->flags
& IEEE80211_KEY_FLAG_PAIRWISE
))
2695 sta_id
= iwl_sta_id_or_broadcast(priv
, vif_priv
->ctx
, sta
);
2696 if (sta_id
== IWL_INVALID_STATION
)
2699 mutex_lock(&priv
->mutex
);
2700 iwl_scan_cancel_timeout(priv
, 100);
2703 * If we are getting WEP group key and we didn't receive any key mapping
2704 * so far, we are in legacy wep mode (group key only), otherwise we are
2706 * In legacy wep mode, we use another host command to the uCode.
2708 if ((key
->cipher
== WLAN_CIPHER_SUITE_WEP40
||
2709 key
->cipher
== WLAN_CIPHER_SUITE_WEP104
) &&
2712 is_default_wep_key
= !ctx
->key_mapping_keys
;
2714 is_default_wep_key
=
2715 (key
->hw_key_idx
== HW_KEY_DEFAULT
);
2720 if (is_default_wep_key
)
2721 ret
= iwl_set_default_wep_key(priv
, vif_priv
->ctx
, key
);
2723 ret
= iwl_set_dynamic_key(priv
, vif_priv
->ctx
,
2726 IWL_DEBUG_MAC80211(priv
, "enable hwcrypto key\n");
2729 if (is_default_wep_key
)
2730 ret
= iwl_remove_default_wep_key(priv
, ctx
, key
);
2732 ret
= iwl_remove_dynamic_key(priv
, ctx
, key
, sta_id
);
2734 IWL_DEBUG_MAC80211(priv
, "disable hwcrypto key\n");
2740 mutex_unlock(&priv
->mutex
);
2741 IWL_DEBUG_MAC80211(priv
, "leave\n");
2746 static int iwlagn_mac_ampdu_action(struct ieee80211_hw
*hw
,
2747 struct ieee80211_vif
*vif
,
2748 enum ieee80211_ampdu_mlme_action action
,
2749 struct ieee80211_sta
*sta
, u16 tid
, u16
*ssn
,
2752 struct iwl_priv
*priv
= hw
->priv
;
2754 struct iwl_station_priv
*sta_priv
= (void *) sta
->drv_priv
;
2756 IWL_DEBUG_HT(priv
, "A-MPDU action on addr %pM tid %d\n",
2759 if (!(priv
->cfg
->sku
& EEPROM_SKU_CAP_11N_ENABLE
))
2762 mutex_lock(&priv
->mutex
);
2765 case IEEE80211_AMPDU_RX_START
:
2766 IWL_DEBUG_HT(priv
, "start Rx\n");
2767 ret
= iwl_sta_rx_agg_start(priv
, sta
, tid
, *ssn
);
2769 case IEEE80211_AMPDU_RX_STOP
:
2770 IWL_DEBUG_HT(priv
, "stop Rx\n");
2771 ret
= iwl_sta_rx_agg_stop(priv
, sta
, tid
);
2772 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2775 case IEEE80211_AMPDU_TX_START
:
2776 IWL_DEBUG_HT(priv
, "start Tx\n");
2777 ret
= iwlagn_tx_agg_start(priv
, vif
, sta
, tid
, ssn
);
2779 priv
->_agn
.agg_tids_count
++;
2780 IWL_DEBUG_HT(priv
, "priv->_agn.agg_tids_count = %u\n",
2781 priv
->_agn
.agg_tids_count
);
2784 case IEEE80211_AMPDU_TX_STOP
:
2785 IWL_DEBUG_HT(priv
, "stop Tx\n");
2786 ret
= iwlagn_tx_agg_stop(priv
, vif
, sta
, tid
);
2787 if ((ret
== 0) && (priv
->_agn
.agg_tids_count
> 0)) {
2788 priv
->_agn
.agg_tids_count
--;
2789 IWL_DEBUG_HT(priv
, "priv->_agn.agg_tids_count = %u\n",
2790 priv
->_agn
.agg_tids_count
);
2792 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2794 if (priv
->cfg
->ht_params
&&
2795 priv
->cfg
->ht_params
->use_rts_for_aggregation
) {
2797 * switch off RTS/CTS if it was previously enabled
2799 sta_priv
->lq_sta
.lq
.general_params
.flags
&=
2800 ~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK
;
2801 iwl_send_lq_cmd(priv
, iwl_rxon_ctx_from_vif(vif
),
2802 &sta_priv
->lq_sta
.lq
, CMD_ASYNC
, false);
2805 case IEEE80211_AMPDU_TX_OPERATIONAL
:
2806 buf_size
= min_t(int, buf_size
, LINK_QUAL_AGG_FRAME_LIMIT_DEF
);
2808 iwlagn_txq_agg_queue_setup(priv
, sta
, tid
, buf_size
);
2811 * If the limit is 0, then it wasn't initialised yet,
2812 * use the default. We can do that since we take the
2813 * minimum below, and we don't want to go above our
2814 * default due to hardware restrictions.
2816 if (sta_priv
->max_agg_bufsize
== 0)
2817 sta_priv
->max_agg_bufsize
=
2818 LINK_QUAL_AGG_FRAME_LIMIT_DEF
;
2821 * Even though in theory the peer could have different
2822 * aggregation reorder buffer sizes for different sessions,
2823 * our ucode doesn't allow for that and has a global limit
2824 * for each station. Therefore, use the minimum of all the
2825 * aggregation sessions and our default value.
2827 sta_priv
->max_agg_bufsize
=
2828 min(sta_priv
->max_agg_bufsize
, buf_size
);
2830 if (priv
->cfg
->ht_params
&&
2831 priv
->cfg
->ht_params
->use_rts_for_aggregation
) {
2833 * switch to RTS/CTS if it is the prefer protection
2834 * method for HT traffic
2837 sta_priv
->lq_sta
.lq
.general_params
.flags
|=
2838 LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK
;
2841 sta_priv
->lq_sta
.lq
.agg_params
.agg_frame_cnt_limit
=
2842 sta_priv
->max_agg_bufsize
;
2844 iwl_send_lq_cmd(priv
, iwl_rxon_ctx_from_vif(vif
),
2845 &sta_priv
->lq_sta
.lq
, CMD_ASYNC
, false);
2847 IWL_INFO(priv
, "Tx aggregation enabled on ra = %pM tid = %d\n",
2852 mutex_unlock(&priv
->mutex
);
2857 static int iwlagn_mac_sta_add(struct ieee80211_hw
*hw
,
2858 struct ieee80211_vif
*vif
,
2859 struct ieee80211_sta
*sta
)
2861 struct iwl_priv
*priv
= hw
->priv
;
2862 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
2863 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
2864 bool is_ap
= vif
->type
== NL80211_IFTYPE_STATION
;
2868 IWL_DEBUG_INFO(priv
, "received request to add station %pM\n",
2870 mutex_lock(&priv
->mutex
);
2871 IWL_DEBUG_INFO(priv
, "proceeding to add station %pM\n",
2873 sta_priv
->common
.sta_id
= IWL_INVALID_STATION
;
2875 atomic_set(&sta_priv
->pending_frames
, 0);
2876 if (vif
->type
== NL80211_IFTYPE_AP
)
2877 sta_priv
->client
= true;
2879 ret
= iwl_add_station_common(priv
, vif_priv
->ctx
, sta
->addr
,
2880 is_ap
, sta
, &sta_id
);
2882 IWL_ERR(priv
, "Unable to add station %pM (%d)\n",
2884 /* Should we return success if return code is EEXIST ? */
2885 mutex_unlock(&priv
->mutex
);
2889 sta_priv
->common
.sta_id
= sta_id
;
2891 /* Initialize rate scaling */
2892 IWL_DEBUG_INFO(priv
, "Initializing rate scaling for station %pM\n",
2894 iwl_rs_rate_init(priv
, sta
, sta_id
);
2895 mutex_unlock(&priv
->mutex
);
2900 static void iwlagn_mac_channel_switch(struct ieee80211_hw
*hw
,
2901 struct ieee80211_channel_switch
*ch_switch
)
2903 struct iwl_priv
*priv
= hw
->priv
;
2904 const struct iwl_channel_info
*ch_info
;
2905 struct ieee80211_conf
*conf
= &hw
->conf
;
2906 struct ieee80211_channel
*channel
= ch_switch
->channel
;
2907 struct iwl_ht_config
*ht_conf
= &priv
->current_ht_config
;
2910 * When we add support for multiple interfaces, we need to
2911 * revisit this. The channel switch command in the device
2912 * only affects the BSS context, but what does that really
2913 * mean? And what if we get a CSA on the second interface?
2914 * This needs a lot of work.
2916 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
2919 IWL_DEBUG_MAC80211(priv
, "enter\n");
2921 mutex_lock(&priv
->mutex
);
2923 if (iwl_is_rfkill(priv
))
2926 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
) ||
2927 test_bit(STATUS_SCANNING
, &priv
->status
) ||
2928 test_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->status
))
2931 if (!iwl_is_associated_ctx(ctx
))
2934 if (!priv
->cfg
->ops
->lib
->set_channel_switch
)
2937 ch
= channel
->hw_value
;
2938 if (le16_to_cpu(ctx
->active
.channel
) == ch
)
2941 ch_info
= iwl_get_channel_info(priv
, channel
->band
, ch
);
2942 if (!is_channel_valid(ch_info
)) {
2943 IWL_DEBUG_MAC80211(priv
, "invalid channel\n");
2947 spin_lock_irq(&priv
->lock
);
2949 priv
->current_ht_config
.smps
= conf
->smps_mode
;
2951 /* Configure HT40 channels */
2952 ctx
->ht
.enabled
= conf_is_ht(conf
);
2953 if (ctx
->ht
.enabled
) {
2954 if (conf_is_ht40_minus(conf
)) {
2955 ctx
->ht
.extension_chan_offset
=
2956 IEEE80211_HT_PARAM_CHA_SEC_BELOW
;
2957 ctx
->ht
.is_40mhz
= true;
2958 } else if (conf_is_ht40_plus(conf
)) {
2959 ctx
->ht
.extension_chan_offset
=
2960 IEEE80211_HT_PARAM_CHA_SEC_ABOVE
;
2961 ctx
->ht
.is_40mhz
= true;
2963 ctx
->ht
.extension_chan_offset
=
2964 IEEE80211_HT_PARAM_CHA_SEC_NONE
;
2965 ctx
->ht
.is_40mhz
= false;
2968 ctx
->ht
.is_40mhz
= false;
2970 if ((le16_to_cpu(ctx
->staging
.channel
) != ch
))
2971 ctx
->staging
.flags
= 0;
2973 iwl_set_rxon_channel(priv
, channel
, ctx
);
2974 iwl_set_rxon_ht(priv
, ht_conf
);
2975 iwl_set_flags_for_band(priv
, ctx
, channel
->band
, ctx
->vif
);
2977 spin_unlock_irq(&priv
->lock
);
2981 * at this point, staging_rxon has the
2982 * configuration for channel switch
2984 set_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->status
);
2985 priv
->switch_channel
= cpu_to_le16(ch
);
2986 if (priv
->cfg
->ops
->lib
->set_channel_switch(priv
, ch_switch
)) {
2987 clear_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->status
);
2988 priv
->switch_channel
= 0;
2989 ieee80211_chswitch_done(ctx
->vif
, false);
2993 mutex_unlock(&priv
->mutex
);
2994 IWL_DEBUG_MAC80211(priv
, "leave\n");
2997 static void iwlagn_configure_filter(struct ieee80211_hw
*hw
,
2998 unsigned int changed_flags
,
2999 unsigned int *total_flags
,
3002 struct iwl_priv
*priv
= hw
->priv
;
3003 __le32 filter_or
= 0, filter_nand
= 0;
3004 struct iwl_rxon_context
*ctx
;
3006 #define CHK(test, flag) do { \
3007 if (*total_flags & (test)) \
3008 filter_or |= (flag); \
3010 filter_nand |= (flag); \
3013 IWL_DEBUG_MAC80211(priv
, "Enter: changed: 0x%x, total: 0x%x\n",
3014 changed_flags
, *total_flags
);
3016 CHK(FIF_OTHER_BSS
| FIF_PROMISC_IN_BSS
, RXON_FILTER_PROMISC_MSK
);
3017 /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
3018 CHK(FIF_CONTROL
, RXON_FILTER_CTL2HOST_MSK
| RXON_FILTER_PROMISC_MSK
);
3019 CHK(FIF_BCN_PRBRESP_PROMISC
, RXON_FILTER_BCON_AWARE_MSK
);
3023 mutex_lock(&priv
->mutex
);
3025 for_each_context(priv
, ctx
) {
3026 ctx
->staging
.filter_flags
&= ~filter_nand
;
3027 ctx
->staging
.filter_flags
|= filter_or
;
3030 * Not committing directly because hardware can perform a scan,
3031 * but we'll eventually commit the filter flags change anyway.
3035 mutex_unlock(&priv
->mutex
);
3038 * Receiving all multicast frames is always enabled by the
3039 * default flags setup in iwl_connection_init_rx_config()
3040 * since we currently do not support programming multicast
3041 * filters into the device.
3043 *total_flags
&= FIF_OTHER_BSS
| FIF_ALLMULTI
| FIF_PROMISC_IN_BSS
|
3044 FIF_BCN_PRBRESP_PROMISC
| FIF_CONTROL
;
3047 static void iwlagn_mac_flush(struct ieee80211_hw
*hw
, bool drop
)
3049 struct iwl_priv
*priv
= hw
->priv
;
3051 mutex_lock(&priv
->mutex
);
3052 IWL_DEBUG_MAC80211(priv
, "enter\n");
3054 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
3055 IWL_DEBUG_TX(priv
, "Aborting flush due to device shutdown\n");
3058 if (iwl_is_rfkill(priv
)) {
3059 IWL_DEBUG_TX(priv
, "Aborting flush due to RF Kill\n");
3064 * mac80211 will not push any more frames for transmit
3065 * until the flush is completed
3068 IWL_DEBUG_MAC80211(priv
, "send flush command\n");
3069 if (iwlagn_txfifo_flush(priv
, IWL_DROP_ALL
)) {
3070 IWL_ERR(priv
, "flush request fail\n");
3074 IWL_DEBUG_MAC80211(priv
, "wait transmit/flush all frames\n");
3075 iwlagn_wait_tx_queue_empty(priv
);
3077 mutex_unlock(&priv
->mutex
);
3078 IWL_DEBUG_MAC80211(priv
, "leave\n");
3081 static void iwlagn_disable_roc(struct iwl_priv
*priv
)
3083 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_PAN
];
3084 struct ieee80211_channel
*chan
= ACCESS_ONCE(priv
->hw
->conf
.channel
);
3086 lockdep_assert_held(&priv
->mutex
);
3088 if (!ctx
->is_active
)
3091 ctx
->staging
.dev_type
= RXON_DEV_TYPE_2STA
;
3092 ctx
->staging
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
3093 iwl_set_rxon_channel(priv
, chan
, ctx
);
3094 iwl_set_flags_for_band(priv
, ctx
, chan
->band
, NULL
);
3096 priv
->_agn
.hw_roc_channel
= NULL
;
3098 iwlagn_commit_rxon(priv
, ctx
);
3100 ctx
->is_active
= false;
3103 static void iwlagn_bg_roc_done(struct work_struct
*work
)
3105 struct iwl_priv
*priv
= container_of(work
, struct iwl_priv
,
3106 _agn
.hw_roc_work
.work
);
3108 mutex_lock(&priv
->mutex
);
3109 ieee80211_remain_on_channel_expired(priv
->hw
);
3110 iwlagn_disable_roc(priv
);
3111 mutex_unlock(&priv
->mutex
);
3114 static int iwl_mac_remain_on_channel(struct ieee80211_hw
*hw
,
3115 struct ieee80211_channel
*channel
,
3116 enum nl80211_channel_type channel_type
,
3119 struct iwl_priv
*priv
= hw
->priv
;
3122 if (!(priv
->valid_contexts
& BIT(IWL_RXON_CTX_PAN
)))
3125 if (!(priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
&
3126 BIT(NL80211_IFTYPE_P2P_CLIENT
)))
3129 mutex_lock(&priv
->mutex
);
3131 if (priv
->contexts
[IWL_RXON_CTX_PAN
].is_active
||
3132 test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
3137 priv
->contexts
[IWL_RXON_CTX_PAN
].is_active
= true;
3138 priv
->_agn
.hw_roc_channel
= channel
;
3139 priv
->_agn
.hw_roc_chantype
= channel_type
;
3140 priv
->_agn
.hw_roc_duration
= DIV_ROUND_UP(duration
* 1000, 1024);
3141 iwlagn_commit_rxon(priv
, &priv
->contexts
[IWL_RXON_CTX_PAN
]);
3142 queue_delayed_work(priv
->workqueue
, &priv
->_agn
.hw_roc_work
,
3143 msecs_to_jiffies(duration
+ 20));
3145 msleep(IWL_MIN_SLOT_TIME
); /* TU is almost ms */
3146 ieee80211_ready_on_channel(priv
->hw
);
3149 mutex_unlock(&priv
->mutex
);
3154 static int iwl_mac_cancel_remain_on_channel(struct ieee80211_hw
*hw
)
3156 struct iwl_priv
*priv
= hw
->priv
;
3158 if (!(priv
->valid_contexts
& BIT(IWL_RXON_CTX_PAN
)))
3161 cancel_delayed_work_sync(&priv
->_agn
.hw_roc_work
);
3163 mutex_lock(&priv
->mutex
);
3164 iwlagn_disable_roc(priv
);
3165 mutex_unlock(&priv
->mutex
);
3170 /*****************************************************************************
3172 * driver setup and teardown
3174 *****************************************************************************/
3176 static void iwl_setup_deferred_work(struct iwl_priv
*priv
)
3178 priv
->workqueue
= create_singlethread_workqueue(DRV_NAME
);
3180 init_waitqueue_head(&priv
->wait_command_queue
);
3182 INIT_WORK(&priv
->restart
, iwl_bg_restart
);
3183 INIT_WORK(&priv
->rx_replenish
, iwl_bg_rx_replenish
);
3184 INIT_WORK(&priv
->beacon_update
, iwl_bg_beacon_update
);
3185 INIT_WORK(&priv
->run_time_calib_work
, iwl_bg_run_time_calib_work
);
3186 INIT_WORK(&priv
->tx_flush
, iwl_bg_tx_flush
);
3187 INIT_WORK(&priv
->bt_full_concurrency
, iwl_bg_bt_full_concurrency
);
3188 INIT_WORK(&priv
->bt_runtime_config
, iwl_bg_bt_runtime_config
);
3189 INIT_DELAYED_WORK(&priv
->_agn
.hw_roc_work
, iwlagn_bg_roc_done
);
3191 iwl_setup_scan_deferred_work(priv
);
3193 if (priv
->cfg
->ops
->lib
->setup_deferred_work
)
3194 priv
->cfg
->ops
->lib
->setup_deferred_work(priv
);
3196 init_timer(&priv
->statistics_periodic
);
3197 priv
->statistics_periodic
.data
= (unsigned long)priv
;
3198 priv
->statistics_periodic
.function
= iwl_bg_statistics_periodic
;
3200 init_timer(&priv
->ucode_trace
);
3201 priv
->ucode_trace
.data
= (unsigned long)priv
;
3202 priv
->ucode_trace
.function
= iwl_bg_ucode_trace
;
3204 init_timer(&priv
->watchdog
);
3205 priv
->watchdog
.data
= (unsigned long)priv
;
3206 priv
->watchdog
.function
= iwl_bg_watchdog
;
3208 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
3209 iwl_irq_tasklet
, (unsigned long)priv
);
3212 static void iwl_cancel_deferred_work(struct iwl_priv
*priv
)
3214 if (priv
->cfg
->ops
->lib
->cancel_deferred_work
)
3215 priv
->cfg
->ops
->lib
->cancel_deferred_work(priv
);
3217 cancel_work_sync(&priv
->run_time_calib_work
);
3218 cancel_work_sync(&priv
->beacon_update
);
3220 iwl_cancel_scan_deferred_work(priv
);
3222 cancel_work_sync(&priv
->bt_full_concurrency
);
3223 cancel_work_sync(&priv
->bt_runtime_config
);
3225 del_timer_sync(&priv
->statistics_periodic
);
3226 del_timer_sync(&priv
->ucode_trace
);
3229 static void iwl_init_hw_rates(struct iwl_priv
*priv
,
3230 struct ieee80211_rate
*rates
)
3234 for (i
= 0; i
< IWL_RATE_COUNT_LEGACY
; i
++) {
3235 rates
[i
].bitrate
= iwl_rates
[i
].ieee
* 5;
3236 rates
[i
].hw_value
= i
; /* Rate scaling will work on indexes */
3237 rates
[i
].hw_value_short
= i
;
3239 if ((i
>= IWL_FIRST_CCK_RATE
) && (i
<= IWL_LAST_CCK_RATE
)) {
3241 * If CCK != 1M then set short preamble rate flag.
3244 (iwl_rates
[i
].plcp
== IWL_RATE_1M_PLCP
) ?
3245 0 : IEEE80211_RATE_SHORT_PREAMBLE
;
3250 static int iwl_init_drv(struct iwl_priv
*priv
)
3254 spin_lock_init(&priv
->sta_lock
);
3255 spin_lock_init(&priv
->hcmd_lock
);
3257 mutex_init(&priv
->mutex
);
3259 priv
->ieee_channels
= NULL
;
3260 priv
->ieee_rates
= NULL
;
3261 priv
->band
= IEEE80211_BAND_2GHZ
;
3263 priv
->iw_mode
= NL80211_IFTYPE_STATION
;
3264 priv
->current_ht_config
.smps
= IEEE80211_SMPS_STATIC
;
3265 priv
->missed_beacon_threshold
= IWL_MISSED_BEACON_THRESHOLD_DEF
;
3266 priv
->_agn
.agg_tids_count
= 0;
3268 /* initialize force reset */
3269 priv
->force_reset
[IWL_RF_RESET
].reset_duration
=
3270 IWL_DELAY_NEXT_FORCE_RF_RESET
;
3271 priv
->force_reset
[IWL_FW_RESET
].reset_duration
=
3272 IWL_DELAY_NEXT_FORCE_FW_RELOAD
;
3274 priv
->rx_statistics_jiffies
= jiffies
;
3276 /* Choose which receivers/antennas to use */
3277 if (priv
->cfg
->ops
->hcmd
->set_rxon_chain
)
3278 priv
->cfg
->ops
->hcmd
->set_rxon_chain(priv
,
3279 &priv
->contexts
[IWL_RXON_CTX_BSS
]);
3281 iwl_init_scan_params(priv
);
3284 if (priv
->cfg
->bt_params
&&
3285 priv
->cfg
->bt_params
->advanced_bt_coexist
) {
3286 priv
->kill_ack_mask
= IWLAGN_BT_KILL_ACK_MASK_DEFAULT
;
3287 priv
->kill_cts_mask
= IWLAGN_BT_KILL_CTS_MASK_DEFAULT
;
3288 priv
->bt_valid
= IWLAGN_BT_ALL_VALID_MSK
;
3289 priv
->bt_on_thresh
= BT_ON_THRESHOLD_DEF
;
3290 priv
->bt_duration
= BT_DURATION_LIMIT_DEF
;
3291 priv
->dynamic_frag_thresh
= BT_FRAG_THRESHOLD_DEF
;
3294 ret
= iwl_init_channel_map(priv
);
3296 IWL_ERR(priv
, "initializing regulatory failed: %d\n", ret
);
3300 ret
= iwlcore_init_geos(priv
);
3302 IWL_ERR(priv
, "initializing geos failed: %d\n", ret
);
3303 goto err_free_channel_map
;
3305 iwl_init_hw_rates(priv
, priv
->ieee_rates
);
3309 err_free_channel_map
:
3310 iwl_free_channel_map(priv
);
3315 static void iwl_uninit_drv(struct iwl_priv
*priv
)
3317 iwl_calib_free_results(priv
);
3318 iwlcore_free_geos(priv
);
3319 iwl_free_channel_map(priv
);
3320 kfree(priv
->scan_cmd
);
3321 kfree(priv
->beacon_cmd
);
3324 struct ieee80211_ops iwlagn_hw_ops
= {
3325 .tx
= iwlagn_mac_tx
,
3326 .start
= iwlagn_mac_start
,
3327 .stop
= iwlagn_mac_stop
,
3328 .add_interface
= iwl_mac_add_interface
,
3329 .remove_interface
= iwl_mac_remove_interface
,
3330 .change_interface
= iwl_mac_change_interface
,
3331 .config
= iwlagn_mac_config
,
3332 .configure_filter
= iwlagn_configure_filter
,
3333 .set_key
= iwlagn_mac_set_key
,
3334 .update_tkip_key
= iwlagn_mac_update_tkip_key
,
3335 .conf_tx
= iwl_mac_conf_tx
,
3336 .bss_info_changed
= iwlagn_bss_info_changed
,
3337 .ampdu_action
= iwlagn_mac_ampdu_action
,
3338 .hw_scan
= iwl_mac_hw_scan
,
3339 .sta_notify
= iwlagn_mac_sta_notify
,
3340 .sta_add
= iwlagn_mac_sta_add
,
3341 .sta_remove
= iwl_mac_sta_remove
,
3342 .channel_switch
= iwlagn_mac_channel_switch
,
3343 .flush
= iwlagn_mac_flush
,
3344 .tx_last_beacon
= iwl_mac_tx_last_beacon
,
3345 .remain_on_channel
= iwl_mac_remain_on_channel
,
3346 .cancel_remain_on_channel
= iwl_mac_cancel_remain_on_channel
,
3347 .offchannel_tx
= iwl_mac_offchannel_tx
,
3348 .offchannel_tx_cancel_wait
= iwl_mac_offchannel_tx_cancel_wait
,
3349 CFG80211_TESTMODE_CMD(iwl_testmode_cmd
)
3350 CFG80211_TESTMODE_DUMP(iwl_testmode_dump
)
3353 static u32
iwl_hw_detect(struct iwl_priv
*priv
)
3355 return iwl_read32(priv
, CSR_HW_REV
);
3358 static int iwl_set_hw_params(struct iwl_priv
*priv
)
3360 priv
->hw_params
.max_rxq_size
= RX_QUEUE_SIZE
;
3361 priv
->hw_params
.max_rxq_log
= RX_QUEUE_SIZE_LOG
;
3362 if (iwlagn_mod_params
.amsdu_size_8K
)
3363 priv
->hw_params
.rx_page_order
= get_order(IWL_RX_BUF_SIZE_8K
);
3365 priv
->hw_params
.rx_page_order
= get_order(IWL_RX_BUF_SIZE_4K
);
3367 priv
->hw_params
.max_beacon_itrvl
= IWL_MAX_UCODE_BEACON_INTERVAL
;
3369 if (iwlagn_mod_params
.disable_11n
)
3370 priv
->cfg
->sku
&= ~EEPROM_SKU_CAP_11N_ENABLE
;
3372 /* Device-specific setup */
3373 return priv
->cfg
->ops
->lib
->set_hw_params(priv
);
3376 static const u8 iwlagn_bss_ac_to_fifo
[] = {
3383 static const u8 iwlagn_bss_ac_to_queue
[] = {
3387 static const u8 iwlagn_pan_ac_to_fifo
[] = {
3388 IWL_TX_FIFO_VO_IPAN
,
3389 IWL_TX_FIFO_VI_IPAN
,
3390 IWL_TX_FIFO_BE_IPAN
,
3391 IWL_TX_FIFO_BK_IPAN
,
3394 static const u8 iwlagn_pan_ac_to_queue
[] = {
3398 /* This function both allocates and initializes hw and priv. */
3399 static struct ieee80211_hw
*iwl_alloc_all(struct iwl_cfg
*cfg
)
3401 struct iwl_priv
*priv
;
3402 /* mac80211 allocates memory for this device instance, including
3403 * space for this driver's private structure */
3404 struct ieee80211_hw
*hw
;
3406 hw
= ieee80211_alloc_hw(sizeof(struct iwl_priv
), &iwlagn_hw_ops
);
3408 pr_err("%s: Can not allocate network device\n",
3420 static void iwl_init_context(struct iwl_priv
*priv
)
3425 * The default context is always valid,
3426 * more may be discovered when firmware
3429 priv
->valid_contexts
= BIT(IWL_RXON_CTX_BSS
);
3431 for (i
= 0; i
< NUM_IWL_RXON_CTX
; i
++)
3432 priv
->contexts
[i
].ctxid
= i
;
3434 priv
->contexts
[IWL_RXON_CTX_BSS
].always_active
= true;
3435 priv
->contexts
[IWL_RXON_CTX_BSS
].is_active
= true;
3436 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_cmd
= REPLY_RXON
;
3437 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_timing_cmd
= REPLY_RXON_TIMING
;
3438 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_assoc_cmd
= REPLY_RXON_ASSOC
;
3439 priv
->contexts
[IWL_RXON_CTX_BSS
].qos_cmd
= REPLY_QOS_PARAM
;
3440 priv
->contexts
[IWL_RXON_CTX_BSS
].ap_sta_id
= IWL_AP_ID
;
3441 priv
->contexts
[IWL_RXON_CTX_BSS
].wep_key_cmd
= REPLY_WEPKEY
;
3442 priv
->contexts
[IWL_RXON_CTX_BSS
].ac_to_fifo
= iwlagn_bss_ac_to_fifo
;
3443 priv
->contexts
[IWL_RXON_CTX_BSS
].ac_to_queue
= iwlagn_bss_ac_to_queue
;
3444 priv
->contexts
[IWL_RXON_CTX_BSS
].exclusive_interface_modes
=
3445 BIT(NL80211_IFTYPE_ADHOC
);
3446 priv
->contexts
[IWL_RXON_CTX_BSS
].interface_modes
=
3447 BIT(NL80211_IFTYPE_STATION
);
3448 priv
->contexts
[IWL_RXON_CTX_BSS
].ap_devtype
= RXON_DEV_TYPE_AP
;
3449 priv
->contexts
[IWL_RXON_CTX_BSS
].ibss_devtype
= RXON_DEV_TYPE_IBSS
;
3450 priv
->contexts
[IWL_RXON_CTX_BSS
].station_devtype
= RXON_DEV_TYPE_ESS
;
3451 priv
->contexts
[IWL_RXON_CTX_BSS
].unused_devtype
= RXON_DEV_TYPE_ESS
;
3453 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_cmd
= REPLY_WIPAN_RXON
;
3454 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_timing_cmd
=
3455 REPLY_WIPAN_RXON_TIMING
;
3456 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_assoc_cmd
=
3457 REPLY_WIPAN_RXON_ASSOC
;
3458 priv
->contexts
[IWL_RXON_CTX_PAN
].qos_cmd
= REPLY_WIPAN_QOS_PARAM
;
3459 priv
->contexts
[IWL_RXON_CTX_PAN
].ap_sta_id
= IWL_AP_ID_PAN
;
3460 priv
->contexts
[IWL_RXON_CTX_PAN
].wep_key_cmd
= REPLY_WIPAN_WEPKEY
;
3461 priv
->contexts
[IWL_RXON_CTX_PAN
].bcast_sta_id
= IWLAGN_PAN_BCAST_ID
;
3462 priv
->contexts
[IWL_RXON_CTX_PAN
].station_flags
= STA_FLG_PAN_STATION
;
3463 priv
->contexts
[IWL_RXON_CTX_PAN
].ac_to_fifo
= iwlagn_pan_ac_to_fifo
;
3464 priv
->contexts
[IWL_RXON_CTX_PAN
].ac_to_queue
= iwlagn_pan_ac_to_queue
;
3465 priv
->contexts
[IWL_RXON_CTX_PAN
].mcast_queue
= IWL_IPAN_MCAST_QUEUE
;
3466 priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
=
3467 BIT(NL80211_IFTYPE_STATION
) | BIT(NL80211_IFTYPE_AP
);
3468 #ifdef CONFIG_IWL_P2P
3469 priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
|=
3470 BIT(NL80211_IFTYPE_P2P_CLIENT
) | BIT(NL80211_IFTYPE_P2P_GO
);
3472 priv
->contexts
[IWL_RXON_CTX_PAN
].ap_devtype
= RXON_DEV_TYPE_CP
;
3473 priv
->contexts
[IWL_RXON_CTX_PAN
].station_devtype
= RXON_DEV_TYPE_2STA
;
3474 priv
->contexts
[IWL_RXON_CTX_PAN
].unused_devtype
= RXON_DEV_TYPE_P2P
;
3476 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
3479 int iwl_probe(void *bus_specific
, struct iwl_bus_ops
*bus_ops
,
3480 struct iwl_cfg
*cfg
)
3483 struct iwl_priv
*priv
;
3484 struct ieee80211_hw
*hw
;
3488 /************************
3489 * 1. Allocating HW data
3490 ************************/
3491 /* TODO: remove this nasty hack when PCI encapsulation is done
3492 * assumes that struct pci_dev * is at the very beginning of whatever
3493 * is pointed by bus_specific */
3494 unsigned long *ppdev
= bus_specific
;
3495 struct pci_dev
*pdev
= (struct pci_dev
*) *ppdev
;
3497 hw
= iwl_alloc_all(cfg
);
3503 priv
->bus
.priv
= priv
;
3504 priv
->bus
.bus_specific
= bus_specific
;
3505 priv
->bus
.ops
= bus_ops
;
3506 priv
->bus
.ops
->set_drv_data(&priv
->bus
, priv
);
3507 priv
->bus
.dev
= priv
->bus
.ops
->get_dev(&priv
->bus
);
3509 /* At this point both hw and priv are allocated. */
3511 SET_IEEE80211_DEV(hw
, priv
->bus
.dev
);
3513 IWL_DEBUG_INFO(priv
, "*** LOAD DRIVER ***\n");
3515 priv
->pci_dev
= pdev
;
3516 priv
->inta_mask
= CSR_INI_SET_MASK
;
3518 /* is antenna coupling more than 35dB ? */
3519 priv
->bt_ant_couple_ok
=
3520 (iwlagn_ant_coupling
> IWL_BT_ANTENNA_COUPLING_THRESHOLD
) ?
3523 /* enable/disable bt channel inhibition */
3524 priv
->bt_ch_announce
= iwlagn_bt_ch_announce
;
3525 IWL_DEBUG_INFO(priv
, "BT channel inhibition is %s\n",
3526 (priv
->bt_ch_announce
) ? "On" : "Off");
3528 if (iwl_alloc_traffic_mem(priv
))
3529 IWL_ERR(priv
, "Not enough memory to generate traffic log\n");
3532 /* these spin locks will be used in apm_ops.init and EEPROM access
3533 * we should init now
3535 spin_lock_init(&priv
->reg_lock
);
3536 spin_lock_init(&priv
->lock
);
3539 * stop and reset the on-board processor just in case it is in a
3540 * strange state ... like being left stranded by a primary kernel
3541 * and this is now the kdump kernel trying to start up
3543 iwl_write32(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_NEVO_RESET
);
3545 /***********************
3546 * 3. Read REV register
3547 ***********************/
3548 hw_rev
= iwl_hw_detect(priv
);
3549 IWL_INFO(priv
, "Detected %s, REV=0x%X\n",
3550 priv
->cfg
->name
, hw_rev
);
3552 if (iwl_prepare_card_hw(priv
)) {
3553 IWL_WARN(priv
, "Failed, HW not ready\n");
3554 goto out_free_traffic_mem
;
3560 /* Read the EEPROM */
3561 err
= iwl_eeprom_init(priv
, hw_rev
);
3563 IWL_ERR(priv
, "Unable to init EEPROM\n");
3564 goto out_free_traffic_mem
;
3566 err
= iwl_eeprom_check_version(priv
);
3568 goto out_free_eeprom
;
3570 err
= iwl_eeprom_check_sku(priv
);
3572 goto out_free_eeprom
;
3574 /* extract MAC Address */
3575 iwl_eeprom_get_mac(priv
, priv
->addresses
[0].addr
);
3576 IWL_DEBUG_INFO(priv
, "MAC address: %pM\n", priv
->addresses
[0].addr
);
3577 priv
->hw
->wiphy
->addresses
= priv
->addresses
;
3578 priv
->hw
->wiphy
->n_addresses
= 1;
3579 num_mac
= iwl_eeprom_query16(priv
, EEPROM_NUM_MAC_ADDRESS
);
3581 memcpy(priv
->addresses
[1].addr
, priv
->addresses
[0].addr
,
3583 priv
->addresses
[1].addr
[5]++;
3584 priv
->hw
->wiphy
->n_addresses
++;
3587 /* initialize all valid contexts */
3588 iwl_init_context(priv
);
3590 /************************
3591 * 5. Setup HW constants
3592 ************************/
3593 if (iwl_set_hw_params(priv
)) {
3595 IWL_ERR(priv
, "failed to set hw parameters\n");
3596 goto out_free_eeprom
;
3599 /*******************
3601 *******************/
3603 err
= iwl_init_drv(priv
);
3605 goto out_free_eeprom
;
3606 /* At this point both hw and priv are initialized. */
3608 /********************
3610 ********************/
3611 iwl_alloc_isr_ict(priv
);
3613 err
= request_irq(priv
->pci_dev
->irq
, iwl_isr_ict
,
3614 IRQF_SHARED
, DRV_NAME
, priv
);
3616 IWL_ERR(priv
, "Error allocating IRQ %d\n", priv
->pci_dev
->irq
);
3617 goto out_uninit_drv
;
3620 iwl_setup_deferred_work(priv
);
3621 iwl_setup_rx_handlers(priv
);
3622 iwl_testmode_init(priv
);
3624 /*********************************************
3625 * 8. Enable interrupts
3626 *********************************************/
3628 iwl_enable_rfkill_int(priv
);
3630 /* If platform's RF_KILL switch is NOT set to KILL */
3631 if (iwl_read32(priv
, CSR_GP_CNTRL
) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
)
3632 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
3634 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
3636 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
,
3637 test_bit(STATUS_RF_KILL_HW
, &priv
->status
));
3639 iwl_power_initialize(priv
);
3640 iwl_tt_initialize(priv
);
3642 init_completion(&priv
->_agn
.firmware_loading_complete
);
3644 err
= iwl_request_firmware(priv
, true);
3646 goto out_destroy_workqueue
;
3650 out_destroy_workqueue
:
3651 destroy_workqueue(priv
->workqueue
);
3652 priv
->workqueue
= NULL
;
3653 free_irq(priv
->pci_dev
->irq
, priv
);
3654 iwl_free_isr_ict(priv
);
3656 iwl_uninit_drv(priv
);
3658 iwl_eeprom_free(priv
);
3659 out_free_traffic_mem
:
3660 iwl_free_traffic_mem(priv
);
3661 ieee80211_free_hw(priv
->hw
);
3666 void __devexit
iwl_remove(struct iwl_priv
* priv
)
3668 unsigned long flags
;
3670 wait_for_completion(&priv
->_agn
.firmware_loading_complete
);
3672 IWL_DEBUG_INFO(priv
, "*** UNLOAD DRIVER ***\n");
3674 iwl_dbgfs_unregister(priv
);
3675 sysfs_remove_group(&priv
->bus
.dev
->kobj
,
3676 &iwl_attribute_group
);
3678 /* ieee80211_unregister_hw call wil cause iwl_mac_stop to
3679 * to be called and iwl_down since we are removing the device
3680 * we need to set STATUS_EXIT_PENDING bit.
3682 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
3684 iwl_testmode_cleanup(priv
);
3685 iwl_leds_exit(priv
);
3687 if (priv
->mac80211_registered
) {
3688 ieee80211_unregister_hw(priv
->hw
);
3689 priv
->mac80211_registered
= 0;
3692 /* Reset to low power before unloading driver. */
3697 /* make sure we flush any pending irq or
3698 * tasklet for the driver
3700 spin_lock_irqsave(&priv
->lock
, flags
);
3701 iwl_disable_interrupts(priv
);
3702 spin_unlock_irqrestore(&priv
->lock
, flags
);
3704 iwl_synchronize_irq(priv
);
3706 iwl_dealloc_ucode(priv
);
3709 iwlagn_rx_queue_free(priv
, &priv
->rxq
);
3710 iwlagn_hw_txq_ctx_free(priv
);
3712 iwl_eeprom_free(priv
);
3715 /*netif_stop_queue(dev); */
3716 flush_workqueue(priv
->workqueue
);
3718 /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
3719 * priv->workqueue... so we can't take down the workqueue
3721 destroy_workqueue(priv
->workqueue
);
3722 priv
->workqueue
= NULL
;
3723 iwl_free_traffic_mem(priv
);
3725 free_irq(priv
->pci_dev
->irq
, priv
);
3726 priv
->bus
.ops
->set_drv_data(&priv
->bus
, NULL
);
3728 iwl_uninit_drv(priv
);
3730 iwl_free_isr_ict(priv
);
3732 dev_kfree_skb(priv
->beacon_skb
);
3734 ieee80211_free_hw(priv
->hw
);
3738 /*****************************************************************************
3740 * driver and module entry point
3742 *****************************************************************************/
3743 static int __init
iwl_init(void)
3747 pr_info(DRV_DESCRIPTION
", " DRV_VERSION
"\n");
3748 pr_info(DRV_COPYRIGHT
"\n");
3750 ret
= iwlagn_rate_control_register();
3752 pr_err("Unable to register rate control algorithm: %d\n", ret
);
3756 ret
= iwl_pci_register_driver();
3759 goto error_register
;
3763 iwlagn_rate_control_unregister();
3767 static void __exit
iwl_exit(void)
3769 iwl_pci_unregister_driver();
3770 iwlagn_rate_control_unregister();
3773 module_exit(iwl_exit
);
3774 module_init(iwl_init
);
3776 #ifdef CONFIG_IWLWIFI_DEBUG
3777 module_param_named(debug
, iwl_debug_level
, uint
, S_IRUGO
| S_IWUSR
);
3778 MODULE_PARM_DESC(debug
, "debug output mask");
3781 module_param_named(swcrypto
, iwlagn_mod_params
.sw_crypto
, int, S_IRUGO
);
3782 MODULE_PARM_DESC(swcrypto
, "using crypto in software (default 0 [hardware])");
3783 module_param_named(queues_num
, iwlagn_mod_params
.num_of_queues
, int, S_IRUGO
);
3784 MODULE_PARM_DESC(queues_num
, "number of hw queues.");
3785 module_param_named(11n_disable
, iwlagn_mod_params
.disable_11n
, int, S_IRUGO
);
3786 MODULE_PARM_DESC(11n_disable
, "disable 11n functionality");
3787 module_param_named(amsdu_size_8K
, iwlagn_mod_params
.amsdu_size_8K
,
3789 MODULE_PARM_DESC(amsdu_size_8K
, "enable 8K amsdu size");
3790 module_param_named(fw_restart
, iwlagn_mod_params
.restart_fw
, int, S_IRUGO
);
3791 MODULE_PARM_DESC(fw_restart
, "restart firmware in case of error");
3793 module_param_named(ucode_alternative
, iwlagn_wanted_ucode_alternative
, int,
3795 MODULE_PARM_DESC(ucode_alternative
,
3796 "specify ucode alternative to use from ucode file");
3798 module_param_named(antenna_coupling
, iwlagn_ant_coupling
, int, S_IRUGO
);
3799 MODULE_PARM_DESC(antenna_coupling
,
3800 "specify antenna coupling in dB (defualt: 0 dB)");
3802 module_param_named(bt_ch_inhibition
, iwlagn_bt_ch_announce
, bool, S_IRUGO
);
3803 MODULE_PARM_DESC(bt_ch_inhibition
,
3804 "Disable BT channel inhibition (default: enable)");
3806 module_param_named(plcp_check
, iwlagn_mod_params
.plcp_check
, bool, S_IRUGO
);
3807 MODULE_PARM_DESC(plcp_check
, "Check plcp health (default: 1 [enabled])");
3809 module_param_named(ack_check
, iwlagn_mod_params
.ack_check
, bool, S_IRUGO
);
3810 MODULE_PARM_DESC(ack_check
, "Check ack health (default: 0 [disabled])");
3813 * set bt_coex_active to true, uCode will do kill/defer
3814 * every time the priority line is asserted (BT is sending signals on the
3815 * priority line in the PCIx).
3816 * set bt_coex_active to false, uCode will ignore the BT activity and
3817 * perform the normal operation
3819 * User might experience transmit issue on some platform due to WiFi/BT
3820 * co-exist problem. The possible behaviors are:
3821 * Able to scan and finding all the available AP
3822 * Not able to associate with any AP
3823 * On those platforms, WiFi communication can be restored by set
3824 * "bt_coex_active" module parameter to "false"
3826 * default: bt_coex_active = true (BT_COEX_ENABLE)
3828 module_param_named(bt_coex_active
, iwlagn_mod_params
.bt_coex_active
,
3830 MODULE_PARM_DESC(bt_coex_active
, "enable wifi/bt co-exist (default: enable)");
3832 module_param_named(led_mode
, iwlagn_mod_params
.led_mode
, int, S_IRUGO
);
3833 MODULE_PARM_DESC(led_mode
, "0=system default, "
3834 "1=On(RF On)/Off(RF Off), 2=blinking (default: 0)");
3837 * For now, keep using power level 1 instead of automatically
3840 module_param_named(no_sleep_autoadjust
, iwlagn_mod_params
.no_sleep_autoadjust
,
3842 MODULE_PARM_DESC(no_sleep_autoadjust
,
3843 "don't automatically adjust sleep level "
3844 "according to maximum network latency (default: true)");