?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[PATCH] 9p: fix fid behavior on failed remove
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / sky2.c
blobde91609ca11230deb09a772268727c41a9f21aff
1 /*
2 * New driver for Marvell Yukon 2 chipset.
3 * Based on earlier sk98lin, and skge driver.
4 *
5 * This driver intentionally does not support all the features
6 * of the original driver such as link fail-over and link management because
7 * those should be done at higher levels.
8 *
9 * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org>
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 */
25
26 #include <linux/crc32.h>
27 #include <linux/kernel.h>
28 #include <linux/version.h>
29 #include <linux/module.h>
30 #include <linux/netdevice.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/etherdevice.h>
33 #include <linux/ethtool.h>
34 #include <linux/pci.h>
35 #include <linux/ip.h>
36 #include <linux/tcp.h>
37 #include <linux/in.h>
38 #include <linux/delay.h>
39 #include <linux/workqueue.h>
40 #include <linux/if_vlan.h>
41 #include <linux/prefetch.h>
42 #include <linux/mii.h>
43
44 #include <asm/irq.h>
45
46 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
47 #define SKY2_VLAN_TAG_USED 1
48 #endif
49
50 #include "sky2.h"
51
52 #define DRV_NAME "sky2"
53 #define DRV_VERSION "1.5"
54 #define PFX DRV_NAME " "
55
56 /*
57 * The Yukon II chipset takes 64 bit command blocks (called list elements)
58 * that are organized into three (receive, transmit, status) different rings
59 * similar to Tigon3. A transmit can require several elements;
60 * a receive requires one (or two if using 64 bit dma).
61 */
62
63 #define RX_LE_SIZE 512
64 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le))
65 #define RX_MAX_PENDING (RX_LE_SIZE/2 - 2)
66 #define RX_DEF_PENDING RX_MAX_PENDING
67 #define RX_SKB_ALIGN 8
68 #define RX_BUF_WRITE 16
69
70 #define TX_RING_SIZE 512
71 #define TX_DEF_PENDING (TX_RING_SIZE - 1)
72 #define TX_MIN_PENDING 64
73 #define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
74
75 #define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */
76 #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le))
77 #define ETH_JUMBO_MTU 9000
78 #define TX_WATCHDOG (5 * HZ)
79 #define NAPI_WEIGHT 64
80 #define PHY_RETRIES 1000
81
82 #define RING_NEXT(x,s) (((x)+1) & ((s)-1))
83
84 static const u32 default_msg =
85 NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
86 | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
87 | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
88
89 static int debug = -1; /* defaults above */
90 module_param(debug, int, 0);
91 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
92
93 static int copybreak __read_mostly = 256;
94 module_param(copybreak, int, 0);
95 MODULE_PARM_DESC(copybreak, "Receive copy threshold");
96
97 static int disable_msi = 0;
98 module_param(disable_msi, int, 0);
99 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
100
101 static int idle_timeout = 100;
102 module_param(idle_timeout, int, 0);
103 MODULE_PARM_DESC(idle_timeout, "Idle timeout workaround for lost interrupts (ms)");
104
105 static const struct pci_device_id sky2_id_table[] = {
106 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
107 { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
108 { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
109 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) },
110 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) },
111 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) },
112 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) },
113 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) },
114 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) },
115 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) },
116 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) },
117 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) },
118 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) },
119 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) },
120 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) },
121 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) },
122 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) },
123 { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) },
124 { 0 }
125 };
126
127 MODULE_DEVICE_TABLE(pci, sky2_id_table);
128
129 /* Avoid conditionals by using array */
130 static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
131 static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
132 static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
133
134 /* This driver supports yukon2 chipset only */
135 static const char *yukon2_name[] = {
136 "XL", /* 0xb3 */
137 "EC Ultra", /* 0xb4 */
138 "UNKNOWN", /* 0xb5 */
139 "EC", /* 0xb6 */
140 "FE", /* 0xb7 */
141 };
142
143 /* Access to external PHY */
144 static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
145 {
146 int i;
147
148 gma_write16(hw, port, GM_SMI_DATA, val);
149 gma_write16(hw, port, GM_SMI_CTRL,
150 GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
151
152 for (i = 0; i < PHY_RETRIES; i++) {
153 if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY))
154 return 0;
155 udelay(1);
156 }
157
158 printk(KERN_WARNING PFX "%s: phy write timeout\n", hw->dev[port]->name);
159 return -ETIMEDOUT;
160 }
161
162 static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
163 {
164 int i;
165
166 gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV)
167 | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
168
169 for (i = 0; i < PHY_RETRIES; i++) {
170 if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) {
171 *val = gma_read16(hw, port, GM_SMI_DATA);
172 return 0;
173 }
174
175 udelay(1);
176 }
177
178 return -ETIMEDOUT;
179 }
180
181 static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
182 {
183 u16 v;
184
185 if (__gm_phy_read(hw, port, reg, &v) != 0)
186 printk(KERN_WARNING PFX "%s: phy read timeout\n", hw->dev[port]->name);
187 return v;
188 }
189
190 static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
191 {
192 u16 power_control;
193 u32 reg1;
194 int vaux;
195
196 pr_debug("sky2_set_power_state %d\n", state);
197 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
198
199 power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC);
200 vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
201 (power_control & PCI_PM_CAP_PME_D3cold);
202
203 power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
204
205 power_control |= PCI_PM_CTRL_PME_STATUS;
206 power_control &= ~(PCI_PM_CTRL_STATE_MASK);
207
208 switch (state) {
209 case PCI_D0:
210 /* switch power to VCC (WA for VAUX problem) */
211 sky2_write8(hw, B0_POWER_CTRL,
212 PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
213
214 /* disable Core Clock Division, */
215 sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
216
217 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
218 /* enable bits are inverted */
219 sky2_write8(hw, B2_Y2_CLK_GATE,
220 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
221 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
222 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
223 else
224 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
225
226 /* Turn off phy power saving */
227 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
228 reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
229
230 /* looks like this XL is back asswards .. */
231 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) {
232 reg1 |= PCI_Y2_PHY1_COMA;
233 if (hw->ports > 1)
234 reg1 |= PCI_Y2_PHY2_COMA;
235 }
236
237 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
238 sky2_pci_write32(hw, PCI_DEV_REG3, 0);
239 reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
240 reg1 &= P_ASPM_CONTROL_MSK;
241 sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
242 sky2_pci_write32(hw, PCI_DEV_REG5, 0);
243 }
244
245 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
246 udelay(100);
247
248 break;
249
250 case PCI_D3hot:
251 case PCI_D3cold:
252 /* Turn on phy power saving */
253 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
254 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
255 reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
256 else
257 reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
258 sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
259 udelay(100);
260
261 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
262 sky2_write8(hw, B2_Y2_CLK_GATE, 0);
263 else
264 /* enable bits are inverted */
265 sky2_write8(hw, B2_Y2_CLK_GATE,
266 Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
267 Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
268 Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
269
270 /* switch power to VAUX */
271 if (vaux && state != PCI_D3cold)
272 sky2_write8(hw, B0_POWER_CTRL,
273 (PC_VAUX_ENA | PC_VCC_ENA |
274 PC_VAUX_ON | PC_VCC_OFF));
275 break;
276 default:
277 printk(KERN_ERR PFX "Unknown power state %d\n", state);
278 }
279
280 sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
281 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
282 }
283
284 static void sky2_phy_reset(struct sky2_hw *hw, unsigned port)
285 {
286 u16 reg;
287
288 /* disable all GMAC IRQ's */
289 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
290 /* disable PHY IRQs */
291 gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
292
293 gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
294 gma_write16(hw, port, GM_MC_ADDR_H2, 0);
295 gma_write16(hw, port, GM_MC_ADDR_H3, 0);
296 gma_write16(hw, port, GM_MC_ADDR_H4, 0);
297
298 reg = gma_read16(hw, port, GM_RX_CTRL);
299 reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA;
300 gma_write16(hw, port, GM_RX_CTRL, reg);
301 }
302
303 static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
304 {
305 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
306 u16 ctrl, ct1000, adv, pg, ledctrl, ledover;
307
308 if (sky2->autoneg == AUTONEG_ENABLE &&
309 !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
310 u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
311
312 ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
313 PHY_M_EC_MAC_S_MSK);
314 ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
315
316 if (hw->chip_id == CHIP_ID_YUKON_EC)
317 ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA;
318 else
319 ectrl |= PHY_M_EC_M_DSC(2) | PHY_M_EC_S_DSC(3);
320
321 gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
322 }
323
324 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
325 if (hw->copper) {
326 if (hw->chip_id == CHIP_ID_YUKON_FE) {
327 /* enable automatic crossover */
328 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
329 } else {
330 /* disable energy detect */
331 ctrl &= ~PHY_M_PC_EN_DET_MSK;
332
333 /* enable automatic crossover */
334 ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
335
336 if (sky2->autoneg == AUTONEG_ENABLE &&
337 (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
338 ctrl &= ~PHY_M_PC_DSC_MSK;
339 ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
340 }
341 }
342 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
343 } else {
344 /* workaround for deviation #4.88 (CRC errors) */
345 /* disable Automatic Crossover */
346
347 ctrl &= ~PHY_M_PC_MDIX_MSK;
348 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
349
350 if (hw->chip_id == CHIP_ID_YUKON_XL) {
351 /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
352 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
353 ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
354 ctrl &= ~PHY_M_MAC_MD_MSK;
355 ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX);
356 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
357
358 /* select page 1 to access Fiber registers */
359 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1);
360 }
361 }
362
363 ctrl = gm_phy_read(hw, port, PHY_MARV_CTRL);
364 if (sky2->autoneg == AUTONEG_DISABLE)
365 ctrl &= ~PHY_CT_ANE;
366 else
367 ctrl |= PHY_CT_ANE;
368
369 ctrl |= PHY_CT_RESET;
370 gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
371
372 ctrl = 0;
373 ct1000 = 0;
374 adv = PHY_AN_CSMA;
375
376 if (sky2->autoneg == AUTONEG_ENABLE) {
377 if (hw->copper) {
378 if (sky2->advertising & ADVERTISED_1000baseT_Full)
379 ct1000 |= PHY_M_1000C_AFD;
380 if (sky2->advertising & ADVERTISED_1000baseT_Half)
381 ct1000 |= PHY_M_1000C_AHD;
382 if (sky2->advertising & ADVERTISED_100baseT_Full)
383 adv |= PHY_M_AN_100_FD;
384 if (sky2->advertising & ADVERTISED_100baseT_Half)
385 adv |= PHY_M_AN_100_HD;
386 if (sky2->advertising & ADVERTISED_10baseT_Full)
387 adv |= PHY_M_AN_10_FD;
388 if (sky2->advertising & ADVERTISED_10baseT_Half)
389 adv |= PHY_M_AN_10_HD;
390 } else /* special defines for FIBER (88E1011S only) */
391 adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD;
392
393 /* Set Flow-control capabilities */
394 if (sky2->tx_pause && sky2->rx_pause)
395 adv |= PHY_AN_PAUSE_CAP; /* symmetric */
396 else if (sky2->rx_pause && !sky2->tx_pause)
397 adv |= PHY_AN_PAUSE_ASYM | PHY_AN_PAUSE_CAP;
398 else if (!sky2->rx_pause && sky2->tx_pause)
399 adv |= PHY_AN_PAUSE_ASYM; /* local */
400
401 /* Restart Auto-negotiation */
402 ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
403 } else {
404 /* forced speed/duplex settings */
405 ct1000 = PHY_M_1000C_MSE;
406
407 if (sky2->duplex == DUPLEX_FULL)
408 ctrl |= PHY_CT_DUP_MD;
409
410 switch (sky2->speed) {
411 case SPEED_1000:
412 ctrl |= PHY_CT_SP1000;
413 break;
414 case SPEED_100:
415 ctrl |= PHY_CT_SP100;
416 break;
417 }
418
419 ctrl |= PHY_CT_RESET;
420 }
421
422 if (hw->chip_id != CHIP_ID_YUKON_FE)
423 gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
424
425 gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
426 gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
427
428 /* Setup Phy LED's */
429 ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
430 ledover = 0;
431
432 switch (hw->chip_id) {
433 case CHIP_ID_YUKON_FE:
434 /* on 88E3082 these bits are at 11..9 (shifted left) */
435 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
436
437 ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR);
438
439 /* delete ACT LED control bits */
440 ctrl &= ~PHY_M_FELP_LED1_MSK;
441 /* change ACT LED control to blink mode */
442 ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL);
443 gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
444 break;
445
446 case CHIP_ID_YUKON_XL:
447 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
448
449 /* select page 3 to access LED control register */
450 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
451
452 /* set LED Function Control register */
453 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
454 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
455 PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
456 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
457 PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
458
459 /* set Polarity Control register */
460 gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
461 (PHY_M_POLC_LS1_P_MIX(4) |
462 PHY_M_POLC_IS0_P_MIX(4) |
463 PHY_M_POLC_LOS_CTRL(2) |
464 PHY_M_POLC_INIT_CTRL(2) |
465 PHY_M_POLC_STA1_CTRL(2) |
466 PHY_M_POLC_STA0_CTRL(2)));
467
468 /* restore page register */
469 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
470 break;
471 case CHIP_ID_YUKON_EC_U:
472 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
473
474 /* select page 3 to access LED control register */
475 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
476
477 /* set LED Function Control register */
478 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
479 (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
480 PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */
481 PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
482 PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
483
484 /* set Blink Rate in LED Timer Control Register */
485 gm_phy_write(hw, port, PHY_MARV_INT_MASK,
486 ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
487 /* restore page register */
488 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
489 break;
490
491 default:
492 /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
493 ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
494 /* turn off the Rx LED (LED_RX) */
495 ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
496 }
497
498 if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) {
499 /* apply fixes in PHY AFE */
500 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
501 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
502
503 /* increase differential signal amplitude in 10BASE-T */
504 gm_phy_write(hw, port, 0x18, 0xaa99);
505 gm_phy_write(hw, port, 0x17, 0x2011);
506
507 /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
508 gm_phy_write(hw, port, 0x18, 0xa204);
509 gm_phy_write(hw, port, 0x17, 0x2002);
510
511 /* set page register to 0 */
512 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
513 } else {
514 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
515
516 if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
517 /* turn on 100 Mbps LED (LED_LINK100) */
518 ledover |= PHY_M_LED_MO_100(MO_LED_ON);
519 }
520
521 if (ledover)
522 gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
523
524 }
525 /* Enable phy interrupt on auto-negotiation complete (or link up) */
526 if (sky2->autoneg == AUTONEG_ENABLE)
527 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
528 else
529 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
530 }
531
532 /* Force a renegotiation */
533 static void sky2_phy_reinit(struct sky2_port *sky2)
534 {
535 spin_lock_bh(&sky2->phy_lock);
536 sky2_phy_init(sky2->hw, sky2->port);
537 spin_unlock_bh(&sky2->phy_lock);
538 }
539
540 static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
541 {
542 struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
543 u16 reg;
544 int i;
545 const u8 *addr = hw->dev[port]->dev_addr;
546
547 sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
548 sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR|GPC_ENA_PAUSE);
549
550 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
551
552 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 && port == 1) {
553 /* WA DEV_472 -- looks like crossed wires on port 2 */
554 /* clear GMAC 1 Control reset */
555 sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR);
556 do {
557 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET);
558 sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR);
559 } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL ||
560 gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 ||
561 gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0);
562 }
563
564 if (sky2->autoneg == AUTONEG_DISABLE) {
565 reg = gma_read16(hw, port, GM_GP_CTRL);
566 reg |= GM_GPCR_AU_ALL_DIS;
567 gma_write16(hw, port, GM_GP_CTRL, reg);
568 gma_read16(hw, port, GM_GP_CTRL);
569
570 switch (sky2->speed) {
571 case SPEED_1000:
572 reg &= ~GM_GPCR_SPEED_100;
573 reg |= GM_GPCR_SPEED_1000;
574 break;
575 case SPEED_100:
576 reg &= ~GM_GPCR_SPEED_1000;
577 reg |= GM_GPCR_SPEED_100;
578 break;
579 case SPEED_10:
580 reg &= ~(GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100);
581 break;
582 }
583
584 if (sky2->duplex == DUPLEX_FULL)
585 reg |= GM_GPCR_DUP_FULL;
586
587 /* turn off pause in 10/100mbps half duplex */
588 else if (sky2->speed != SPEED_1000 &&
589 hw->chip_id != CHIP_ID_YUKON_EC_U)
590 sky2->tx_pause = sky2->rx_pause = 0;
591 } else
592 reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL;
593
594 if (!sky2->tx_pause && !sky2->rx_pause) {
595 sky2_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
596 reg |=
597 GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
598 } else if (sky2->tx_pause && !sky2->rx_pause) {
599 /* disable Rx flow-control */
600 reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
601 }
602
603 gma_write16(hw, port, GM_GP_CTRL, reg);
604
605 sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC));
606
607 spin_lock_bh(&sky2->phy_lock);
608 sky2_phy_init(hw, port);
609 spin_unlock_bh(&sky2->phy_lock);
610
611 /* MIB clear */
612 reg = gma_read16(hw, port, GM_PHY_ADDR);
613 gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
614
615 for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4)
616 gma_read16(hw, port, i);
617 gma_write16(hw, port, GM_PHY_ADDR, reg);
618
619 /* transmit control */
620 gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
621
622 /* receive control reg: unicast + multicast + no FCS */
623 gma_write16(hw, port, GM_RX_CTRL,
624 GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA);
625
626 /* transmit flow control */
627 gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
628
629 /* transmit parameter */
630 gma_write16(hw, port, GM_TX_PARAM,
631 TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) |
632 TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
633 TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) |
634 TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
635
636 /* serial mode register */
637 reg = DATA_BLIND_VAL(DATA_BLIND_DEF) |
638 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
639
640 if (hw->dev[port]->mtu > ETH_DATA_LEN)
641 reg |= GM_SMOD_JUMBO_ENA;
642
643 gma_write16(hw, port, GM_SERIAL_MODE, reg);
644
645 /* virtual address for data */
646 gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
647
648 /* physical address: used for pause frames */
649 gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
650
651 /* ignore counter overflows */
652 gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
653 gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
654 gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
655
656 /* Configure Rx MAC FIFO */
657 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
658 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
659 GMF_OPER_ON | GMF_RX_F_FL_ON);
660
661 /* Flush Rx MAC FIFO on any flow control or error */
662 sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
663
664 /* Set threshold to 0xa (64 bytes)
665 * ASF disabled so no need to do WA dev #4.30
666 */
667 sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
668
669 /* Configure Tx MAC FIFO */
670 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
671 sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
672
673 if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
674 sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
675 sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
676 if (hw->dev[port]->mtu > ETH_DATA_LEN) {
677 /* set Tx GMAC FIFO Almost Empty Threshold */
678 sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), 0x180);
679 /* Disable Store & Forward mode for TX */
680 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
681 }
682 }
683
684 }
685
686 /* Assign Ram Buffer allocation.
687 * start and end are in units of 4k bytes
688 * ram registers are in units of 64bit words
689 */
690 static void sky2_ramset(struct sky2_hw *hw, u16 q, u8 startk, u8 endk)
691 {
692 u32 start, end;
693
694 start = startk * 4096/8;
695 end = (endk * 4096/8) - 1;
696
697 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
698 sky2_write32(hw, RB_ADDR(q, RB_START), start);
699 sky2_write32(hw, RB_ADDR(q, RB_END), end);
700 sky2_write32(hw, RB_ADDR(q, RB_WP), start);
701 sky2_write32(hw, RB_ADDR(q, RB_RP), start);
702
703 if (q == Q_R1 || q == Q_R2) {
704 u32 space = (endk - startk) * 4096/8;
705 u32 tp = space - space/4;
706
707 /* On receive queue's set the thresholds
708 * give receiver priority when > 3/4 full
709 * send pause when down to 2K
710 */
711 sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
712 sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
713
714 tp = space - 2048/8;
715 sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
716 sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
717 } else {
718 /* Enable store & forward on Tx queue's because
719 * Tx FIFO is only 1K on Yukon
720 */
721 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
722 }
723
724 sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
725 sky2_read8(hw, RB_ADDR(q, RB_CTRL));
726 }
727
728 /* Setup Bus Memory Interface */
729 static void sky2_qset(struct sky2_hw *hw, u16 q)
730 {
731 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET);
732 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT);
733 sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON);
734 sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT);
735 }
736
737 /* Setup prefetch unit registers. This is the interface between
738 * hardware and driver list elements
739 */
740 static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
741 u64 addr, u32 last)
742 {
743 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
744 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR);
745 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), addr >> 32);
746 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), (u32) addr);
747 sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last);
748 sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON);
749
750 sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL));
751 }
752
753 static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
754 {
755 struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod;
756
757 sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE);
758 return le;
759 }
760
761 /* Update chip's next pointer */
762 static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
763 {
764 wmb();
765 sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx);
766 mmiowb();
767 }
768
769
770 static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
771 {
772 struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
773 sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
774 return le;
775 }
776
777 /* Return high part of DMA address (could be 32 or 64 bit) */
778 static inline u32 high32(dma_addr_t a)
779 {
780 return sizeof(a) > sizeof(u32) ? (a >> 16) >> 16 : 0;
781 }
782
783 /* Build description to hardware about buffer */
784 static void sky2_rx_add(struct sky2_port *sky2, dma_addr_t map)
785 {
786 struct sky2_rx_le *le;
787 u32 hi = high32(map);
788 u16 len = sky2->rx_bufsize;
789
790 if (sky2->rx_addr64 != hi) {
791 le = sky2_next_rx(sky2);
792 le->addr = cpu_to_le32(hi);
793 le->ctrl = 0;
794 le->opcode = OP_ADDR64 | HW_OWNER;
795 sky2->rx_addr64 = high32(map + len);
796 }
797
798 le = sky2_next_rx(sky2);
799 le->addr = cpu_to_le32((u32) map);
800 le->length = cpu_to_le16(len);
801 le->ctrl = 0;
802 le->opcode = OP_PACKET | HW_OWNER;
803 }
804
805
806 /* Tell chip where to start receive checksum.
807 * Actually has two checksums, but set both same to avoid possible byte
808 * order problems.
809 */
810 static void rx_set_checksum(struct sky2_port *sky2)
811 {
812 struct sky2_rx_le *le;
813
814 le = sky2_next_rx(sky2);
815 le->addr = (ETH_HLEN << 16) | ETH_HLEN;
816 le->ctrl = 0;
817 le->opcode = OP_TCPSTART | HW_OWNER;
818
819 sky2_write32(sky2->hw,
820 Q_ADDR(rxqaddr[sky2->port], Q_CSR),
821 sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
822
823 }
824
825 /*
826 * The RX Stop command will not work for Yukon-2 if the BMU does not
827 * reach the end of packet and since we can't make sure that we have
828 * incoming data, we must reset the BMU while it is not doing a DMA
829 * transfer. Since it is possible that the RX path is still active,
830 * the RX RAM buffer will be stopped first, so any possible incoming
831 * data will not trigger a DMA. After the RAM buffer is stopped, the
832 * BMU is polled until any DMA in progress is ended and only then it
833 * will be reset.
834 */
835 static void sky2_rx_stop(struct sky2_port *sky2)
836 {
837 struct sky2_hw *hw = sky2->hw;
838 unsigned rxq = rxqaddr[sky2->port];
839 int i;
840
841 /* disable the RAM Buffer receive queue */
842 sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD);
843
844 for (i = 0; i < 0xffff; i++)
845 if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL))
846 == sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
847 goto stopped;
848
849 printk(KERN_WARNING PFX "%s: receiver stop failed\n",
850 sky2->netdev->name);
851 stopped:
852 sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
853
854 /* reset the Rx prefetch unit */
855 sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
856 }
857
858 /* Clean out receive buffer area, assumes receiver hardware stopped */
859 static void sky2_rx_clean(struct sky2_port *sky2)
860 {
861 unsigned i;
862
863 memset(sky2->rx_le, 0, RX_LE_BYTES);
864 for (i = 0; i < sky2->rx_pending; i++) {
865 struct ring_info *re = sky2->rx_ring + i;
866
867 if (re->skb) {
868 pci_unmap_single(sky2->hw->pdev,
869 re->mapaddr, sky2->rx_bufsize,
870 PCI_DMA_FROMDEVICE);
871 kfree_skb(re->skb);
872 re->skb = NULL;
873 }
874 }
875 }
876
877 /* Basic MII support */
878 static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
879 {
880 struct mii_ioctl_data *data = if_mii(ifr);
881 struct sky2_port *sky2 = netdev_priv(dev);
882 struct sky2_hw *hw = sky2->hw;
883 int err = -EOPNOTSUPP;
884
885 if (!netif_running(dev))
886 return -ENODEV; /* Phy still in reset */
887
888 switch (cmd) {
889 case SIOCGMIIPHY:
890 data->phy_id = PHY_ADDR_MARV;
891
892 /* fallthru */
893 case SIOCGMIIREG: {
894 u16 val = 0;
895
896 spin_lock_bh(&sky2->phy_lock);
897 err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val);
898 spin_unlock_bh(&sky2->phy_lock);
899
900 data->val_out = val;
901 break;
902 }
903
904 case SIOCSMIIREG:
905 if (!capable(CAP_NET_ADMIN))
906 return -EPERM;
907
908 spin_lock_bh(&sky2->phy_lock);
909 err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f,
910 data->val_in);
911 spin_unlock_bh(&sky2->phy_lock);
912 break;
913 }
914 return err;
915 }
916
917 #ifdef SKY2_VLAN_TAG_USED
918 static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
919 {
920 struct sky2_port *sky2 = netdev_priv(dev);
921 struct sky2_hw *hw = sky2->hw;
922 u16 port = sky2->port;
923
924 spin_lock_bh(&sky2->tx_lock);
925
926 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_ON);
927 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_ON);
928 sky2->vlgrp = grp;
929
930 spin_unlock_bh(&sky2->tx_lock);
931 }
932
933 static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
934 {
935 struct sky2_port *sky2 = netdev_priv(dev);
936 struct sky2_hw *hw = sky2->hw;
937 u16 port = sky2->port;
938
939 spin_lock_bh(&sky2->tx_lock);
940
941 sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF);
942 sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF);
943 if (sky2->vlgrp)
944 sky2->vlgrp->vlan_devices[vid] = NULL;
945
946 spin_unlock_bh(&sky2->tx_lock);
947 }
948 #endif
949
950 /*
951 * It appears the hardware has a bug in the FIFO logic that
952 * cause it to hang if the FIFO gets overrun and the receive buffer
953 * is not aligned. ALso alloc_skb() won't align properly if slab
954 * debugging is enabled.
955 */
956 static inline struct sk_buff *sky2_alloc_skb(unsigned int size, gfp_t gfp_mask)
957 {
958 struct sk_buff *skb;
959
960 skb = alloc_skb(size + RX_SKB_ALIGN, gfp_mask);
961 if (likely(skb)) {
962 unsigned long p = (unsigned long) skb->data;
963 skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p);
964 }
965
966 return skb;
967 }
968
969 /*
970 * Allocate and setup receiver buffer pool.
971 * In case of 64 bit dma, there are 2X as many list elements
972 * available as ring entries
973 * and need to reserve one list element so we don't wrap around.
974 */
975 static int sky2_rx_start(struct sky2_port *sky2)
976 {
977 struct sky2_hw *hw = sky2->hw;
978 unsigned rxq = rxqaddr[sky2->port];
979 int i;
980 unsigned thresh;
981
982 sky2->rx_put = sky2->rx_next = 0;
983 sky2_qset(hw, rxq);
984
985 if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
986 /* MAC Rx RAM Read is controlled by hardware */
987 sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
988 }
989
990 sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
991
992 rx_set_checksum(sky2);
993 for (i = 0; i < sky2->rx_pending; i++) {
994 struct ring_info *re = sky2->rx_ring + i;
995
996 re->skb = sky2_alloc_skb(sky2->rx_bufsize, GFP_KERNEL);
997 if (!re->skb)
998 goto nomem;
999
1000 re->mapaddr = pci_map_single(hw->pdev, re->skb->data,
1001 sky2->rx_bufsize, PCI_DMA_FROMDEVICE);
1002 sky2_rx_add(sky2, re->mapaddr);
1003 }
1004
1005
1006 /*
1007 * The receiver hangs if it receives frames larger than the
1008 * packet buffer. As a workaround, truncate oversize frames, but
1009 * the register is limited to 9 bits, so if you do frames > 2052
1010 * you better get the MTU right!
1011 */
1012 thresh = (sky2->rx_bufsize - 8) / sizeof(u32);
1013 if (thresh > 0x1ff)
1014 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
1015 else {
1016 sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
1017 sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
1018 }
1019
1020
1021 /* Tell chip about available buffers */
1022 sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
1023 return 0;
1024 nomem:
1025 sky2_rx_clean(sky2);
1026 return -ENOMEM;
1027 }
1028
1029 /* Bring up network interface. */
1030 static int sky2_up(struct net_device *dev)
1031 {
1032 struct sky2_port *sky2 = netdev_priv(dev);
1033 struct sky2_hw *hw = sky2->hw;
1034 unsigned port = sky2->port;
1035 u32 ramsize, rxspace, imask;
1036 int cap, err = -ENOMEM;
1037 struct net_device *otherdev = hw->dev[sky2->port^1];
1038
1039 /*
1040 * On dual port PCI-X card, there is an problem where status
1041 * can be received out of order due to split transactions
1042 */
1043 if (otherdev && netif_running(otherdev) &&
1044 (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
1045 struct sky2_port *osky2 = netdev_priv(otherdev);
1046 u16 cmd;
1047
1048 cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
1049 cmd &= ~PCI_X_CMD_MAX_SPLIT;
1050 sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
1051
1052 sky2->rx_csum = 0;
1053 osky2->rx_csum = 0;
1054 }
1055
1056 if (netif_msg_ifup(sky2))
1057 printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
1058
1059 /* must be power of 2 */
1060 sky2->tx_le = pci_alloc_consistent(hw->pdev,
1061 TX_RING_SIZE *
1062 sizeof(struct sky2_tx_le),
1063 &sky2->tx_le_map);
1064 if (!sky2->tx_le)
1065 goto err_out;
1066
1067 sky2->tx_ring = kcalloc(TX_RING_SIZE, sizeof(struct tx_ring_info),
1068 GFP_KERNEL);
1069 if (!sky2->tx_ring)
1070 goto err_out;
1071 sky2->tx_prod = sky2->tx_cons = 0;
1072
1073 sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
1074 &sky2->rx_le_map);
1075 if (!sky2->rx_le)
1076 goto err_out;
1077 memset(sky2->rx_le, 0, RX_LE_BYTES);
1078
1079 sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct ring_info),
1080 GFP_KERNEL);
1081 if (!sky2->rx_ring)
1082 goto err_out;
1083
1084 sky2_mac_init(hw, port);
1085
1086 /* Determine available ram buffer space (in 4K blocks).
1087 * Note: not sure about the FE setting below yet
1088 */
1089 if (hw->chip_id == CHIP_ID_YUKON_FE)
1090 ramsize = 4;
1091 else
1092 ramsize = sky2_read8(hw, B2_E_0);
1093
1094 /* Give transmitter one third (rounded up) */
1095 rxspace = ramsize - (ramsize + 2) / 3;
1096
1097 sky2_ramset(hw, rxqaddr[port], 0, rxspace);
1098 sky2_ramset(hw, txqaddr[port], rxspace, ramsize);
1099
1100 /* Make sure SyncQ is disabled */
1101 sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
1102 RB_RST_SET);
1103
1104 sky2_qset(hw, txqaddr[port]);
1105
1106 /* Set almost empty threshold */
1107 if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == 1)
1108 sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
1109
1110 sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
1111 TX_RING_SIZE - 1);
1112
1113 err = sky2_rx_start(sky2);
1114 if (err)
1115 goto err_out;
1116
1117 /* Enable interrupts from phy/mac for port */
1118 imask = sky2_read32(hw, B0_IMSK);
1119 imask |= portirq_msk[port];
1120 sky2_write32(hw, B0_IMSK, imask);
1121
1122 return 0;
1123
1124 err_out:
1125 if (sky2->rx_le) {
1126 pci_free_consistent(hw->pdev, RX_LE_BYTES,
1127 sky2->rx_le, sky2->rx_le_map);
1128 sky2->rx_le = NULL;
1129 }
1130 if (sky2->tx_le) {
1131 pci_free_consistent(hw->pdev,
1132 TX_RING_SIZE * sizeof(struct sky2_tx_le),
1133 sky2->tx_le, sky2->tx_le_map);
1134 sky2->tx_le = NULL;
1135 }
1136 kfree(sky2->tx_ring);
1137 kfree(sky2->rx_ring);
1138
1139 sky2->tx_ring = NULL;
1140 sky2->rx_ring = NULL;
1141 return err;
1142 }
1143
1144 /* Modular subtraction in ring */
1145 static inline int tx_dist(unsigned tail, unsigned head)
1146 {
1147 return (head - tail) & (TX_RING_SIZE - 1);
1148 }
1149
1150 /* Number of list elements available for next tx */
1151 static inline int tx_avail(const struct sky2_port *sky2)
1152 {
1153 return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod);
1154 }
1155
1156 /* Estimate of number of transmit list elements required */
1157 static unsigned tx_le_req(const struct sk_buff *skb)
1158 {
1159 unsigned count;
1160
1161 count = sizeof(dma_addr_t) / sizeof(u32);
1162 count += skb_shinfo(skb)->nr_frags * count;
1163
1164 if (skb_is_gso(skb))
1165 ++count;
1166
1167 if (skb->ip_summed == CHECKSUM_HW)
1168 ++count;
1169
1170 return count;
1171 }
1172
1173 /*
1174 * Put one packet in ring for transmit.
1175 * A single packet can generate multiple list elements, and
1176 * the number of ring elements will probably be less than the number
1177 * of list elements used.
1178 *
1179 * No BH disabling for tx_lock here (like tg3)
1180 */
1181 static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
1182 {
1183 struct sky2_port *sky2 = netdev_priv(dev);
1184 struct sky2_hw *hw = sky2->hw;
1185 struct sky2_tx_le *le = NULL;
1186 struct tx_ring_info *re;
1187 unsigned i, len;
1188 int avail;
1189 dma_addr_t mapping;
1190 u32 addr64;
1191 u16 mss;
1192 u8 ctrl;
1193
1194 /* No BH disabling for tx_lock here. We are running in BH disabled
1195 * context and TX reclaim runs via poll inside of a software
1196 * interrupt, and no related locks in IRQ processing.
1197 */
1198 if (!spin_trylock(&sky2->tx_lock))
1199 return NETDEV_TX_LOCKED;
1200
1201 if (unlikely(tx_avail(sky2) < tx_le_req(skb))) {
1202 /* There is a known but harmless race with lockless tx
1203 * and netif_stop_queue.
1204 */
1205 if (!netif_queue_stopped(dev)) {
1206 netif_stop_queue(dev);
1207 if (net_ratelimit())
1208 printk(KERN_WARNING PFX "%s: ring full when queue awake!\n",
1209 dev->name);
1210 }
1211 spin_unlock(&sky2->tx_lock);
1212
1213 return NETDEV_TX_BUSY;
1214 }
1215
1216 if (unlikely(netif_msg_tx_queued(sky2)))
1217 printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n",
1218 dev->name, sky2->tx_prod, skb->len);
1219
1220 len = skb_headlen(skb);
1221 mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
1222 addr64 = high32(mapping);
1223
1224 re = sky2->tx_ring + sky2->tx_prod;
1225
1226 /* Send high bits if changed or crosses boundary */
1227 if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) {
1228 le = get_tx_le(sky2);
1229 le->tx.addr = cpu_to_le32(addr64);
1230 le->ctrl = 0;
1231 le->opcode = OP_ADDR64 | HW_OWNER;
1232 sky2->tx_addr64 = high32(mapping + len);
1233 }
1234
1235 /* Check for TCP Segmentation Offload */
1236 mss = skb_shinfo(skb)->gso_size;
1237 if (mss != 0) {
1238 /* just drop the packet if non-linear expansion fails */
1239 if (skb_header_cloned(skb) &&
1240 pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
1241 dev_kfree_skb(skb);
1242 goto out_unlock;
1243 }
1244
1245 mss += ((skb->h.th->doff - 5) * 4); /* TCP options */
1246 mss += (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr);
1247 mss += ETH_HLEN;
1248 }
1249
1250 if (mss != sky2->tx_last_mss) {
1251 le = get_tx_le(sky2);
1252 le->tx.tso.size = cpu_to_le16(mss);
1253 le->tx.tso.rsvd = 0;
1254 le->opcode = OP_LRGLEN | HW_OWNER;
1255 le->ctrl = 0;
1256 sky2->tx_last_mss = mss;
1257 }
1258
1259 ctrl = 0;
1260 #ifdef SKY2_VLAN_TAG_USED
1261 /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
1262 if (sky2->vlgrp && vlan_tx_tag_present(skb)) {
1263 if (!le) {
1264 le = get_tx_le(sky2);
1265 le->tx.addr = 0;
1266 le->opcode = OP_VLAN|HW_OWNER;
1267 le->ctrl = 0;
1268 } else
1269 le->opcode |= OP_VLAN;
1270 le->length = cpu_to_be16(vlan_tx_tag_get(skb));
1271 ctrl |= INS_VLAN;
1272 }
1273 #endif
1274
1275 /* Handle TCP checksum offload */
1276 if (skb->ip_summed == CHECKSUM_HW) {
1277 u16 hdr = skb->h.raw - skb->data;
1278 u16 offset = hdr + skb->csum;
1279
1280 ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
1281 if (skb->nh.iph->protocol == IPPROTO_UDP)
1282 ctrl |= UDPTCP;
1283
1284 le = get_tx_le(sky2);
1285 le->tx.csum.start = cpu_to_le16(hdr);
1286 le->tx.csum.offset = cpu_to_le16(offset);
1287 le->length = 0; /* initial checksum value */
1288 le->ctrl = 1; /* one packet */
1289 le->opcode = OP_TCPLISW | HW_OWNER;
1290 }
1291
1292 le = get_tx_le(sky2);
1293 le->tx.addr = cpu_to_le32((u32) mapping);
1294 le->length = cpu_to_le16(len);
1295 le->ctrl = ctrl;
1296 le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
1297
1298 /* Record the transmit mapping info */
1299 re->skb = skb;
1300 pci_unmap_addr_set(re, mapaddr, mapping);
1301
1302 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1303 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1304 struct tx_ring_info *fre;
1305
1306 mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
1307 frag->size, PCI_DMA_TODEVICE);
1308 addr64 = high32(mapping);
1309 if (addr64 != sky2->tx_addr64) {
1310 le = get_tx_le(sky2);
1311 le->tx.addr = cpu_to_le32(addr64);
1312 le->ctrl = 0;
1313 le->opcode = OP_ADDR64 | HW_OWNER;
1314 sky2->tx_addr64 = addr64;
1315 }
1316
1317 le = get_tx_le(sky2);
1318 le->tx.addr = cpu_to_le32((u32) mapping);
1319 le->length = cpu_to_le16(frag->size);
1320 le->ctrl = ctrl;
1321 le->opcode = OP_BUFFER | HW_OWNER;
1322
1323 fre = sky2->tx_ring
1324 + RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE);
1325 pci_unmap_addr_set(fre, mapaddr, mapping);
1326 }
1327
1328 re->idx = sky2->tx_prod;
1329 le->ctrl |= EOP;
1330
1331 avail = tx_avail(sky2);
1332 if (mss != 0 || avail < TX_MIN_PENDING) {
1333 le->ctrl |= FRC_STAT;
1334 if (avail <= MAX_SKB_TX_LE)
1335 netif_stop_queue(dev);
1336 }
1337
1338 sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
1339
1340 out_unlock:
1341 spin_unlock(&sky2->tx_lock);
1342
1343 dev->trans_start = jiffies;
1344 return NETDEV_TX_OK;
1345 }
1346
1347 /*
1348 * Free ring elements from starting at tx_cons until "done"
1349 *
1350 * NB: the hardware will tell us about partial completion of multi-part
1351 * buffers; these are deferred until completion.
1352 */
1353 static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
1354 {
1355 struct net_device *dev = sky2->netdev;
1356 struct pci_dev *pdev = sky2->hw->pdev;
1357 u16 nxt, put;
1358 unsigned i;
1359
1360 BUG_ON(done >= TX_RING_SIZE);
1361
1362 if (unlikely(netif_msg_tx_done(sky2)))
1363 printk(KERN_DEBUG "%s: tx done, up to %u\n",
1364 dev->name, done);
1365
1366 for (put = sky2->tx_cons; put != done; put = nxt) {
1367 struct tx_ring_info *re = sky2->tx_ring + put;
1368 struct sk_buff *skb = re->skb;
1369
1370 nxt = re->idx;
1371 BUG_ON(nxt >= TX_RING_SIZE);
1372 prefetch(sky2->tx_ring + nxt);
1373
1374 /* Check for partial status */
1375 if (tx_dist(put, done) < tx_dist(put, nxt))
1376 break;
1377
1378 skb = re->skb;
1379 pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),
1380 skb_headlen(skb), PCI_DMA_TODEVICE);
1381
1382 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1383 struct tx_ring_info *fre;
1384 fre = sky2->tx_ring + RING_NEXT(put + i, TX_RING_SIZE);
1385 pci_unmap_page(pdev, pci_unmap_addr(fre, mapaddr),
1386 skb_shinfo(skb)->frags[i].size,
1387 PCI_DMA_TODEVICE);
1388 }
1389
1390 dev_kfree_skb(skb);
1391 }
1392
1393 sky2->tx_cons = put;
1394 if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
1395 netif_wake_queue(dev);
1396 }
1397
1398 /* Cleanup all untransmitted buffers, assume transmitter not running */
1399 static void sky2_tx_clean(struct sky2_port *sky2)
1400 {
1401 spin_lock_bh(&sky2->tx_lock);
1402 sky2_tx_complete(sky2, sky2->tx_prod);
1403 spin_unlock_bh(&sky2->tx_lock);
1404 }
1405
1406 /* Network shutdown */
1407 static int sky2_down(struct net_device *dev)
1408 {
1409 struct sky2_port *sky2 = netdev_priv(dev);
1410 struct sky2_hw *hw = sky2->hw;
1411 unsigned port = sky2->port;
1412 u16 ctrl;
1413 u32 imask;
1414
1415 /* Never really got started! */
1416 if (!sky2->tx_le)
1417 return 0;
1418
1419 if (netif_msg_ifdown(sky2))
1420 printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
1421
1422 /* Stop more packets from being queued */
1423 netif_stop_queue(dev);
1424
1425 sky2_phy_reset(hw, port);
1426
1427 /* Stop transmitter */
1428 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
1429 sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR));
1430
1431 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
1432 RB_RST_SET | RB_DIS_OP_MD);
1433
1434 ctrl = gma_read16(hw, port, GM_GP_CTRL);
1435 ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
1436 gma_write16(hw, port, GM_GP_CTRL, ctrl);
1437
1438 sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
1439
1440 /* Workaround shared GMAC reset */
1441 if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0
1442 && port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
1443 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
1444
1445 /* Disable Force Sync bit and Enable Alloc bit */
1446 sky2_write8(hw, SK_REG(port, TXA_CTRL),
1447 TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
1448
1449 /* Stop Interval Timer and Limit Counter of Tx Arbiter */
1450 sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
1451 sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
1452
1453 /* Reset the PCI FIFO of the async Tx queue */
1454 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
1455 BMU_RST_SET | BMU_FIFO_RST);
1456
1457 /* Reset the Tx prefetch units */
1458 sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
1459 PREF_UNIT_RST_SET);
1460
1461 sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
1462
1463 sky2_rx_stop(sky2);
1464
1465 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
1466 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
1467
1468 /* Disable port IRQ */
1469 imask = sky2_read32(hw, B0_IMSK);
1470 imask &= ~portirq_msk[port];
1471 sky2_write32(hw, B0_IMSK, imask);
1472
1473 /* turn off LED's */
1474 sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
1475
1476 synchronize_irq(hw->pdev->irq);
1477
1478 sky2_tx_clean(sky2);
1479 sky2_rx_clean(sky2);
1480
1481 pci_free_consistent(hw->pdev, RX_LE_BYTES,
1482 sky2->rx_le, sky2->rx_le_map);
1483 kfree(sky2->rx_ring);
1484
1485 pci_free_consistent(hw->pdev,
1486 TX_RING_SIZE * sizeof(struct sky2_tx_le),
1487 sky2->tx_le, sky2->tx_le_map);
1488 kfree(sky2->tx_ring);
1489
1490 sky2->tx_le = NULL;
1491 sky2->rx_le = NULL;
1492
1493 sky2->rx_ring = NULL;
1494 sky2->tx_ring = NULL;
1495
1496 return 0;
1497 }
1498
1499 static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
1500 {
1501 if (!hw->copper)
1502 return SPEED_1000;
1503
1504 if (hw->chip_id == CHIP_ID_YUKON_FE)
1505 return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10;
1506
1507 switch (aux & PHY_M_PS_SPEED_MSK) {
1508 case PHY_M_PS_SPEED_1000:
1509 return SPEED_1000;
1510 case PHY_M_PS_SPEED_100:
1511 return SPEED_100;
1512 default:
1513 return SPEED_10;
1514 }
1515 }
1516
1517 static void sky2_link_up(struct sky2_port *sky2)
1518 {
1519 struct sky2_hw *hw = sky2->hw;
1520 unsigned port = sky2->port;
1521 u16 reg;
1522
1523 /* Enable Transmit FIFO Underrun */
1524 sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
1525
1526 reg = gma_read16(hw, port, GM_GP_CTRL);
1527 if (sky2->autoneg == AUTONEG_DISABLE) {
1528 reg |= GM_GPCR_AU_ALL_DIS;
1529
1530 /* Is write/read necessary? Copied from sky2_mac_init */
1531 gma_write16(hw, port, GM_GP_CTRL, reg);
1532 gma_read16(hw, port, GM_GP_CTRL);
1533
1534 switch (sky2->speed) {
1535 case SPEED_1000:
1536 reg &= ~GM_GPCR_SPEED_100;
1537 reg |= GM_GPCR_SPEED_1000;
1538 break;
1539 case SPEED_100:
1540 reg &= ~GM_GPCR_SPEED_1000;
1541 reg |= GM_GPCR_SPEED_100;
1542 break;
1543 case SPEED_10:
1544 reg &= ~(GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100);
1545 break;
1546 }
1547 } else
1548 reg &= ~GM_GPCR_AU_ALL_DIS;
1549
1550 if (sky2->duplex == DUPLEX_FULL || sky2->autoneg == AUTONEG_ENABLE)
1551 reg |= GM_GPCR_DUP_FULL;
1552
1553 /* enable Rx/Tx */
1554 reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
1555 gma_write16(hw, port, GM_GP_CTRL, reg);
1556 gma_read16(hw, port, GM_GP_CTRL);
1557
1558 gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
1559
1560 netif_carrier_on(sky2->netdev);
1561 netif_wake_queue(sky2->netdev);
1562
1563 /* Turn on link LED */
1564 sky2_write8(hw, SK_REG(port, LNK_LED_REG),
1565 LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
1566
1567 if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) {
1568 u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
1569 u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */
1570
1571 switch(sky2->speed) {
1572 case SPEED_10:
1573 led |= PHY_M_LEDC_INIT_CTRL(7);
1574 break;
1575
1576 case SPEED_100:
1577 led |= PHY_M_LEDC_STA1_CTRL(7);
1578 break;
1579
1580 case SPEED_1000:
1581 led |= PHY_M_LEDC_STA0_CTRL(7);
1582 break;
1583 }
1584
1585 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
1586 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led);
1587 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
1588 }
1589
1590 if (netif_msg_link(sky2))
1591 printk(KERN_INFO PFX
1592 "%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
1593 sky2->netdev->name, sky2->speed,
1594 sky2->duplex == DUPLEX_FULL ? "full" : "half",
1595 (sky2->tx_pause && sky2->rx_pause) ? "both" :
1596 sky2->tx_pause ? "tx" : sky2->rx_pause ? "rx" : "none");
1597 }
1598
1599 static void sky2_link_down(struct sky2_port *sky2)
1600 {
1601 struct sky2_hw *hw = sky2->hw;
1602 unsigned port = sky2->port;
1603 u16 reg;
1604
1605 gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
1606
1607 reg = gma_read16(hw, port, GM_GP_CTRL);
1608 reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
1609 gma_write16(hw, port, GM_GP_CTRL, reg);
1610 gma_read16(hw, port, GM_GP_CTRL); /* PCI post */
1611
1612 if (sky2->rx_pause && !sky2->tx_pause) {
1613 /* restore Asymmetric Pause bit */
1614 gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
1615 gm_phy_read(hw, port, PHY_MARV_AUNE_ADV)
1616 | PHY_M_AN_ASP);
1617 }
1618
1619 netif_carrier_off(sky2->netdev);
1620 netif_stop_queue(sky2->netdev);
1621
1622 /* Turn on link LED */
1623 sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
1624
1625 if (netif_msg_link(sky2))
1626 printk(KERN_INFO PFX "%s: Link is down.\n", sky2->netdev->name);
1627 sky2_phy_init(hw, port);
1628 }
1629
1630 static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
1631 {
1632 struct sky2_hw *hw = sky2->hw;
1633 unsigned port = sky2->port;
1634 u16 lpa;
1635
1636 lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
1637
1638 if (lpa & PHY_M_AN_RF) {
1639 printk(KERN_ERR PFX "%s: remote fault", sky2->netdev->name);
1640 return -1;
1641 }
1642
1643 if (hw->chip_id != CHIP_ID_YUKON_FE &&
1644 gm_phy_read(hw, port, PHY_MARV_1000T_STAT) & PHY_B_1000S_MSF) {
1645 printk(KERN_ERR PFX "%s: master/slave fault",
1646 sky2->netdev->name);
1647 return -1;
1648 }
1649
1650 if (!(aux & PHY_M_PS_SPDUP_RES)) {
1651 printk(KERN_ERR PFX "%s: speed/duplex mismatch",
1652 sky2->netdev->name);
1653 return -1;
1654 }
1655
1656 sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
1657
1658 sky2->speed = sky2_phy_speed(hw, aux);
1659
1660 /* Pause bits are offset (9..8) */
1661 if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)
1662 aux >>= 6;
1663
1664 sky2->rx_pause = (aux & PHY_M_PS_RX_P_EN) != 0;
1665 sky2->tx_pause = (aux & PHY_M_PS_TX_P_EN) != 0;
1666
1667 if ((sky2->tx_pause || sky2->rx_pause)
1668 && !(sky2->speed < SPEED_1000 && sky2->duplex == DUPLEX_HALF))
1669 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
1670 else
1671 sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
1672
1673 return 0;
1674 }
1675
1676 /* Interrupt from PHY */
1677 static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
1678 {
1679 struct net_device *dev = hw->dev[port];
1680 struct sky2_port *sky2 = netdev_priv(dev);
1681 u16 istatus, phystat;
1682
1683 spin_lock(&sky2->phy_lock);
1684 istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT);
1685 phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
1686
1687 if (!netif_running(dev))
1688 goto out;
1689
1690 if (netif_msg_intr(sky2))
1691 printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n",
1692 sky2->netdev->name, istatus, phystat);
1693
1694 if (istatus & PHY_M_IS_AN_COMPL) {
1695 if (sky2_autoneg_done(sky2, phystat) == 0)
1696 sky2_link_up(sky2);
1697 goto out;
1698 }
1699
1700 if (istatus & PHY_M_IS_LSP_CHANGE)
1701 sky2->speed = sky2_phy_speed(hw, phystat);
1702
1703 if (istatus & PHY_M_IS_DUP_CHANGE)
1704 sky2->duplex =
1705 (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
1706
1707 if (istatus & PHY_M_IS_LST_CHANGE) {
1708 if (phystat & PHY_M_PS_LINK_UP)
1709 sky2_link_up(sky2);
1710 else
1711 sky2_link_down(sky2);
1712 }
1713 out:
1714 spin_unlock(&sky2->phy_lock);
1715 }
1716
1717
1718 /* Transmit timeout is only called if we are running, carries is up
1719 * and tx queue is full (stopped).
1720 */
1721 static void sky2_tx_timeout(struct net_device *dev)
1722 {
1723 struct sky2_port *sky2 = netdev_priv(dev);
1724 struct sky2_hw *hw = sky2->hw;
1725 unsigned txq = txqaddr[sky2->port];
1726 u16 report, done;
1727
1728 if (netif_msg_timer(sky2))
1729 printk(KERN_ERR PFX "%s: tx timeout\n", dev->name);
1730
1731 report = sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX);
1732 done = sky2_read16(hw, Q_ADDR(txq, Q_DONE));
1733
1734 printk(KERN_DEBUG PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
1735 dev->name,
1736 sky2->tx_cons, sky2->tx_prod, report, done);
1737
1738 if (report != done) {
1739 printk(KERN_INFO PFX "status burst pending (irq moderation?)\n");
1740
1741 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
1742 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
1743 } else if (report != sky2->tx_cons) {
1744 printk(KERN_INFO PFX "status report lost?\n");
1745
1746 spin_lock_bh(&sky2->tx_lock);
1747 sky2_tx_complete(sky2, report);
1748 spin_unlock_bh(&sky2->tx_lock);
1749 } else {
1750 printk(KERN_INFO PFX "hardware hung? flushing\n");
1751
1752 sky2_write32(hw, Q_ADDR(txq, Q_CSR), BMU_STOP);
1753 sky2_write32(hw, Y2_QADDR(txq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
1754
1755 sky2_tx_clean(sky2);
1756
1757 sky2_qset(hw, txq);
1758 sky2_prefetch_init(hw, txq, sky2->tx_le_map, TX_RING_SIZE - 1);
1759 }
1760 }
1761
1762
1763 /* Want receive buffer size to be multiple of 64 bits
1764 * and incl room for vlan and truncation
1765 */
1766 static inline unsigned sky2_buf_size(int mtu)
1767 {
1768 return ALIGN(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8;
1769 }
1770
1771 static int sky2_change_mtu(struct net_device *dev, int new_mtu)
1772 {
1773 struct sky2_port *sky2 = netdev_priv(dev);
1774 struct sky2_hw *hw = sky2->hw;
1775 int err;
1776 u16 ctl, mode;
1777 u32 imask;
1778
1779 if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
1780 return -EINVAL;
1781
1782 if (hw->chip_id == CHIP_ID_YUKON_EC_U && new_mtu > ETH_DATA_LEN)
1783 return -EINVAL;
1784
1785 if (!netif_running(dev)) {
1786 dev->mtu = new_mtu;
1787 return 0;
1788 }
1789
1790 imask = sky2_read32(hw, B0_IMSK);
1791 sky2_write32(hw, B0_IMSK, 0);
1792
1793 dev->trans_start = jiffies; /* prevent tx timeout */
1794 netif_stop_queue(dev);
1795 netif_poll_disable(hw->dev[0]);
1796
1797 synchronize_irq(hw->pdev->irq);
1798
1799 ctl = gma_read16(hw, sky2->port, GM_GP_CTRL);
1800 gma_write16(hw, sky2->port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
1801 sky2_rx_stop(sky2);
1802 sky2_rx_clean(sky2);
1803
1804 dev->mtu = new_mtu;
1805 sky2->rx_bufsize = sky2_buf_size(new_mtu);
1806 mode = DATA_BLIND_VAL(DATA_BLIND_DEF) |
1807 GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
1808
1809 if (dev->mtu > ETH_DATA_LEN)
1810 mode |= GM_SMOD_JUMBO_ENA;
1811
1812 gma_write16(hw, sky2->port, GM_SERIAL_MODE, mode);
1813
1814 sky2_write8(hw, RB_ADDR(rxqaddr[sky2->port], RB_CTRL), RB_ENA_OP_MD);
1815
1816 err = sky2_rx_start(sky2);
1817 sky2_write32(hw, B0_IMSK, imask);
1818
1819 if (err)
1820 dev_close(dev);
1821 else {
1822 gma_write16(hw, sky2->port, GM_GP_CTRL, ctl);
1823
1824 netif_poll_enable(hw->dev[0]);
1825 netif_wake_queue(dev);
1826 }
1827
1828 return err;
1829 }
1830
1831 /*
1832 * Receive one packet.
1833 * For small packets or errors, just reuse existing skb.
1834 * For larger packets, get new buffer.
1835 */
1836 static struct sk_buff *sky2_receive(struct sky2_port *sky2,
1837 u16 length, u32 status)
1838 {
1839 struct ring_info *re = sky2->rx_ring + sky2->rx_next;
1840 struct sk_buff *skb = NULL;
1841
1842 if (unlikely(netif_msg_rx_status(sky2)))
1843 printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n",
1844 sky2->netdev->name, sky2->rx_next, status, length);
1845
1846 sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
1847 prefetch(sky2->rx_ring + sky2->rx_next);
1848
1849 if (status & GMR_FS_ANY_ERR)
1850 goto error;
1851
1852 if (!(status & GMR_FS_RX_OK))
1853 goto resubmit;
1854
1855 if (length > sky2->netdev->mtu + ETH_HLEN)
1856 goto oversize;
1857
1858 if (length < copybreak) {
1859 skb = alloc_skb(length + 2, GFP_ATOMIC);
1860 if (!skb)
1861 goto resubmit;
1862
1863 skb_reserve(skb, 2);
1864 pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->mapaddr,
1865 length, PCI_DMA_FROMDEVICE);
1866 memcpy(skb->data, re->skb->data, length);
1867 skb->ip_summed = re->skb->ip_summed;
1868 skb->csum = re->skb->csum;
1869 pci_dma_sync_single_for_device(sky2->hw->pdev, re->mapaddr,
1870 length, PCI_DMA_FROMDEVICE);
1871 } else {
1872 struct sk_buff *nskb;
1873
1874 nskb = sky2_alloc_skb(sky2->rx_bufsize, GFP_ATOMIC);
1875 if (!nskb)
1876 goto resubmit;
1877
1878 skb = re->skb;
1879 re->skb = nskb;
1880 pci_unmap_single(sky2->hw->pdev, re->mapaddr,
1881 sky2->rx_bufsize, PCI_DMA_FROMDEVICE);
1882 prefetch(skb->data);
1883
1884 re->mapaddr = pci_map_single(sky2->hw->pdev, nskb->data,
1885 sky2->rx_bufsize, PCI_DMA_FROMDEVICE);
1886 }
1887
1888 skb_put(skb, length);
1889 resubmit:
1890 re->skb->ip_summed = CHECKSUM_NONE;
1891 sky2_rx_add(sky2, re->mapaddr);
1892
1893 return skb;
1894
1895 oversize:
1896 ++sky2->net_stats.rx_over_errors;
1897 goto resubmit;
1898
1899 error:
1900 ++sky2->net_stats.rx_errors;
1901
1902 if (netif_msg_rx_err(sky2) && net_ratelimit())
1903 printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n",
1904 sky2->netdev->name, status, length);
1905
1906 if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE))
1907 sky2->net_stats.rx_length_errors++;
1908 if (status & GMR_FS_FRAGMENT)
1909 sky2->net_stats.rx_frame_errors++;
1910 if (status & GMR_FS_CRC_ERR)
1911 sky2->net_stats.rx_crc_errors++;
1912 if (status & GMR_FS_RX_FF_OV)
1913 sky2->net_stats.rx_fifo_errors++;
1914
1915 goto resubmit;
1916 }
1917
1918 /* Transmit complete */
1919 static inline void sky2_tx_done(struct net_device *dev, u16 last)
1920 {
1921 struct sky2_port *sky2 = netdev_priv(dev);
1922
1923 if (netif_running(dev)) {
1924 spin_lock(&sky2->tx_lock);
1925 sky2_tx_complete(sky2, last);
1926 spin_unlock(&sky2->tx_lock);
1927 }
1928 }
1929
1930 /* Is status ring empty or is there more to do? */
1931 static inline int sky2_more_work(const struct sky2_hw *hw)
1932 {
1933 return (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX));
1934 }
1935
1936 /* Process status response ring */
1937 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
1938 {
1939 struct sky2_port *sky2;
1940 int work_done = 0;
1941 unsigned buf_write[2] = { 0, 0 };
1942 u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
1943
1944 rmb();
1945
1946 while (hw->st_idx != hwidx) {
1947 struct sky2_status_le *le = hw->st_le + hw->st_idx;
1948 struct net_device *dev;
1949 struct sk_buff *skb;
1950 u32 status;
1951 u16 length;
1952
1953 hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE);
1954
1955 BUG_ON(le->link >= 2);
1956 dev = hw->dev[le->link];
1957
1958 sky2 = netdev_priv(dev);
1959 length = le->length;
1960 status = le->status;
1961
1962 switch (le->opcode & ~HW_OWNER) {
1963 case OP_RXSTAT:
1964 skb = sky2_receive(sky2, length, status);
1965 if (!skb)
1966 break;
1967
1968 skb->dev = dev;
1969 skb->protocol = eth_type_trans(skb, dev);
1970 dev->last_rx = jiffies;
1971
1972 #ifdef SKY2_VLAN_TAG_USED
1973 if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
1974 vlan_hwaccel_receive_skb(skb,
1975 sky2->vlgrp,
1976 be16_to_cpu(sky2->rx_tag));
1977 } else
1978 #endif
1979 netif_receive_skb(skb);
1980
1981 /* Update receiver after 16 frames */
1982 if (++buf_write[le->link] == RX_BUF_WRITE) {
1983 sky2_put_idx(hw, rxqaddr[le->link],
1984 sky2->rx_put);
1985 buf_write[le->link] = 0;
1986 }
1987
1988 /* Stop after net poll weight */
1989 if (++work_done >= to_do)
1990 goto exit_loop;
1991 break;
1992
1993 #ifdef SKY2_VLAN_TAG_USED
1994 case OP_RXVLAN:
1995 sky2->rx_tag = length;
1996 break;
1997
1998 case OP_RXCHKSVLAN:
1999 sky2->rx_tag = length;
2000 /* fall through */
2001 #endif
2002 case OP_RXCHKS:
2003 skb = sky2->rx_ring[sky2->rx_next].skb;
2004 skb->ip_summed = CHECKSUM_HW;
2005 skb->csum = le16_to_cpu(status);
2006 break;
2007
2008 case OP_TXINDEXLE:
2009 /* TX index reports status for both ports */
2010 BUILD_BUG_ON(TX_RING_SIZE > 0x1000);
2011 sky2_tx_done(hw->dev[0], status & 0xfff);
2012 if (hw->dev[1])
2013 sky2_tx_done(hw->dev[1],
2014 ((status >> 24) & 0xff)
2015 | (u16)(length & 0xf) << 8);
2016 break;
2017
2018 default:
2019 if (net_ratelimit())
2020 printk(KERN_WARNING PFX
2021 "unknown status opcode 0x%x\n", le->opcode);
2022 goto exit_loop;
2023 }
2024 }
2025
2026 exit_loop:
2027 if (buf_write[0]) {
2028 sky2 = netdev_priv(hw->dev[0]);
2029 sky2_put_idx(hw, Q_R1, sky2->rx_put);
2030 }
2031
2032 if (buf_write[1]) {
2033 sky2 = netdev_priv(hw->dev[1]);
2034 sky2_put_idx(hw, Q_R2, sky2->rx_put);
2035 }
2036
2037 return work_done;
2038 }
2039
2040 static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
2041 {
2042 struct net_device *dev = hw->dev[port];
2043
2044 if (net_ratelimit())
2045 printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n",
2046 dev->name, status);
2047
2048 if (status & Y2_IS_PAR_RD1) {
2049 if (net_ratelimit())
2050 printk(KERN_ERR PFX "%s: ram data read parity error\n",
2051 dev->name);
2052 /* Clear IRQ */
2053 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
2054 }
2055
2056 if (status & Y2_IS_PAR_WR1) {
2057 if (net_ratelimit())
2058 printk(KERN_ERR PFX "%s: ram data write parity error\n",
2059 dev->name);
2060
2061 sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
2062 }
2063
2064 if (status & Y2_IS_PAR_MAC1) {
2065 if (net_ratelimit())
2066 printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name);
2067 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
2068 }
2069
2070 if (status & Y2_IS_PAR_RX1) {
2071 if (net_ratelimit())
2072 printk(KERN_ERR PFX "%s: RX parity error\n", dev->name);
2073 sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
2074 }
2075
2076 if (status & Y2_IS_TCP_TXA1) {
2077 if (net_ratelimit())
2078 printk(KERN_ERR PFX "%s: TCP segmentation error\n",
2079 dev->name);
2080 sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
2081 }
2082 }
2083
2084 static void sky2_hw_intr(struct sky2_hw *hw)
2085 {
2086 u32 status = sky2_read32(hw, B0_HWE_ISRC);
2087
2088 if (status & Y2_IS_TIST_OV)
2089 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
2090
2091 if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
2092 u16 pci_err;
2093
2094 pci_err = sky2_pci_read16(hw, PCI_STATUS);
2095 if (net_ratelimit())
2096 printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
2097 pci_name(hw->pdev), pci_err);
2098
2099 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2100 sky2_pci_write16(hw, PCI_STATUS,
2101 pci_err | PCI_STATUS_ERROR_BITS);
2102 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2103 }
2104
2105 if (status & Y2_IS_PCI_EXP) {
2106 /* PCI-Express uncorrectable Error occurred */
2107 u32 pex_err;
2108
2109 pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
2110
2111 if (net_ratelimit())
2112 printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
2113 pci_name(hw->pdev), pex_err);
2114
2115 /* clear the interrupt */
2116 sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2117 sky2_pci_write32(hw, PEX_UNC_ERR_STAT,
2118 0xffffffffUL);
2119 sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2120
2121 if (pex_err & PEX_FATAL_ERRORS) {
2122 u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
2123 hwmsk &= ~Y2_IS_PCI_EXP;
2124 sky2_write32(hw, B0_HWE_IMSK, hwmsk);
2125 }
2126 }
2127
2128 if (status & Y2_HWE_L1_MASK)
2129 sky2_hw_error(hw, 0, status);
2130 status >>= 8;
2131 if (status & Y2_HWE_L1_MASK)
2132 sky2_hw_error(hw, 1, status);
2133 }
2134
2135 static void sky2_mac_intr(struct sky2_hw *hw, unsigned port)
2136 {
2137 struct net_device *dev = hw->dev[port];
2138 struct sky2_port *sky2 = netdev_priv(dev);
2139 u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
2140
2141 if (netif_msg_intr(sky2))
2142 printk(KERN_INFO PFX "%s: mac interrupt status 0x%x\n",
2143 dev->name, status);
2144
2145 if (status & GM_IS_RX_FF_OR) {
2146 ++sky2->net_stats.rx_fifo_errors;
2147 sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
2148 }
2149
2150 if (status & GM_IS_TX_FF_UR) {
2151 ++sky2->net_stats.tx_fifo_errors;
2152 sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
2153 }
2154 }
2155
2156 /* This should never happen it is a fatal situation */
2157 static void sky2_descriptor_error(struct sky2_hw *hw, unsigned port,
2158 const char *rxtx, u32 mask)
2159 {
2160 struct net_device *dev = hw->dev[port];
2161 struct sky2_port *sky2 = netdev_priv(dev);
2162 u32 imask;
2163
2164 printk(KERN_ERR PFX "%s: %s descriptor error (hardware problem)\n",
2165 dev ? dev->name : "<not registered>", rxtx);
2166
2167 imask = sky2_read32(hw, B0_IMSK);
2168 imask &= ~mask;
2169 sky2_write32(hw, B0_IMSK, imask);
2170
2171 if (dev) {
2172 spin_lock(&sky2->phy_lock);
2173 sky2_link_down(sky2);
2174 spin_unlock(&sky2->phy_lock);
2175 }
2176 }
2177
2178 /* If idle then force a fake soft NAPI poll once a second
2179 * to work around cases where sharing an edge triggered interrupt.
2180 */
2181 static inline void sky2_idle_start(struct sky2_hw *hw)
2182 {
2183 if (idle_timeout > 0)
2184 mod_timer(&hw->idle_timer,
2185 jiffies + msecs_to_jiffies(idle_timeout));
2186 }
2187
2188 static void sky2_idle(unsigned long arg)
2189 {
2190 struct sky2_hw *hw = (struct sky2_hw *) arg;
2191 struct net_device *dev = hw->dev[0];
2192
2193 if (__netif_rx_schedule_prep(dev))
2194 __netif_rx_schedule(dev);
2195
2196 mod_timer(&hw->idle_timer, jiffies + msecs_to_jiffies(idle_timeout));
2197 }
2198
2199
2200 static int sky2_poll(struct net_device *dev0, int *budget)
2201 {
2202 struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
2203 int work_limit = min(dev0->quota, *budget);
2204 int work_done = 0;
2205 u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
2206
2207 if (status & Y2_IS_HW_ERR)
2208 sky2_hw_intr(hw);
2209
2210 if (status & Y2_IS_IRQ_PHY1)
2211 sky2_phy_intr(hw, 0);
2212
2213 if (status & Y2_IS_IRQ_PHY2)
2214 sky2_phy_intr(hw, 1);
2215
2216 if (status & Y2_IS_IRQ_MAC1)
2217 sky2_mac_intr(hw, 0);
2218
2219 if (status & Y2_IS_IRQ_MAC2)
2220 sky2_mac_intr(hw, 1);
2221
2222 if (status & Y2_IS_CHK_RX1)
2223 sky2_descriptor_error(hw, 0, "receive", Y2_IS_CHK_RX1);
2224
2225 if (status & Y2_IS_CHK_RX2)
2226 sky2_descriptor_error(hw, 1, "receive", Y2_IS_CHK_RX2);
2227
2228 if (status & Y2_IS_CHK_TXA1)
2229 sky2_descriptor_error(hw, 0, "transmit", Y2_IS_CHK_TXA1);
2230
2231 if (status & Y2_IS_CHK_TXA2)
2232 sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
2233
2234 work_done = sky2_status_intr(hw, work_limit);
2235 *budget -= work_done;
2236 dev0->quota -= work_done;
2237
2238 if (status & Y2_IS_STAT_BMU)
2239 sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
2240
2241 if (sky2_more_work(hw))
2242 return 1;
2243
2244 netif_rx_complete(dev0);
2245
2246 sky2_read32(hw, B0_Y2_SP_LISR);
2247 return 0;
2248 }
2249
2250 static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
2251 {
2252 struct sky2_hw *hw = dev_id;
2253 struct net_device *dev0 = hw->dev[0];
2254 u32 status;
2255
2256 /* Reading this mask interrupts as side effect */
2257 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
2258 if (status == 0 || status == ~0)
2259 return IRQ_NONE;
2260
2261 prefetch(&hw->st_le[hw->st_idx]);
2262 if (likely(__netif_rx_schedule_prep(dev0)))
2263 __netif_rx_schedule(dev0);
2264
2265 return IRQ_HANDLED;
2266 }
2267
2268 #ifdef CONFIG_NET_POLL_CONTROLLER
2269 static void sky2_netpoll(struct net_device *dev)
2270 {
2271 struct sky2_port *sky2 = netdev_priv(dev);
2272 struct net_device *dev0 = sky2->hw->dev[0];
2273
2274 if (netif_running(dev) && __netif_rx_schedule_prep(dev0))
2275 __netif_rx_schedule(dev0);
2276 }
2277 #endif
2278
2279 /* Chip internal frequency for clock calculations */
2280 static inline u32 sky2_mhz(const struct sky2_hw *hw)
2281 {
2282 switch (hw->chip_id) {
2283 case CHIP_ID_YUKON_EC:
2284 case CHIP_ID_YUKON_EC_U:
2285 return 125; /* 125 Mhz */
2286 case CHIP_ID_YUKON_FE:
2287 return 100; /* 100 Mhz */
2288 default: /* YUKON_XL */
2289 return 156; /* 156 Mhz */
2290 }
2291 }
2292
2293 static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us)
2294 {
2295 return sky2_mhz(hw) * us;
2296 }
2297
2298 static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
2299 {
2300 return clk / sky2_mhz(hw);
2301 }
2302
2303
2304 static int sky2_reset(struct sky2_hw *hw)
2305 {
2306 u16 status;
2307 u8 t8, pmd_type;
2308 int i;
2309
2310 sky2_write8(hw, B0_CTST, CS_RST_CLR);
2311
2312 hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
2313 if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) {
2314 printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n",
2315 pci_name(hw->pdev), hw->chip_id);
2316 return -EOPNOTSUPP;
2317 }
2318
2319 hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
2320
2321 /* This rev is really old, and requires untested workarounds */
2322 if (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == CHIP_REV_YU_EC_A1) {
2323 printk(KERN_ERR PFX "%s: unsupported revision Yukon-%s (0x%x) rev %d\n",
2324 pci_name(hw->pdev), yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
2325 hw->chip_id, hw->chip_rev);
2326 return -EOPNOTSUPP;
2327 }
2328
2329 /* disable ASF */
2330 if (hw->chip_id <= CHIP_ID_YUKON_EC) {
2331 sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
2332 sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
2333 }
2334
2335 /* do a SW reset */
2336 sky2_write8(hw, B0_CTST, CS_RST_SET);
2337 sky2_write8(hw, B0_CTST, CS_RST_CLR);
2338
2339 /* clear PCI errors, if any */
2340 status = sky2_pci_read16(hw, PCI_STATUS);
2341
2342 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
2343 sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS);
2344
2345
2346 sky2_write8(hw, B0_CTST, CS_MRST_CLR);
2347
2348 /* clear any PEX errors */
2349 if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
2350 sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
2351
2352
2353 pmd_type = sky2_read8(hw, B2_PMD_TYP);
2354 hw->copper = !(pmd_type == 'L' || pmd_type == 'S');
2355
2356 hw->ports = 1;
2357 t8 = sky2_read8(hw, B2_Y2_HW_RES);
2358 if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
2359 if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
2360 ++hw->ports;
2361 }
2362
2363 sky2_set_power_state(hw, PCI_D0);
2364
2365 for (i = 0; i < hw->ports; i++) {
2366 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
2367 sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
2368 }
2369
2370 sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
2371
2372 /* Clear I2C IRQ noise */
2373 sky2_write32(hw, B2_I2C_IRQ, 1);
2374
2375 /* turn off hardware timer (unused) */
2376 sky2_write8(hw, B2_TI_CTRL, TIM_STOP);
2377 sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
2378
2379 sky2_write8(hw, B0_Y2LED, LED_STAT_ON);
2380
2381 /* Turn off descriptor polling */
2382 sky2_write32(hw, B28_DPT_CTRL, DPT_STOP);
2383
2384 /* Turn off receive timestamp */
2385 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP);
2386 sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
2387
2388 /* enable the Tx Arbiters */
2389 for (i = 0; i < hw->ports; i++)
2390 sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB);
2391
2392 /* Initialize ram interface */
2393 for (i = 0; i < hw->ports; i++) {
2394 sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR);
2395
2396 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53);
2397 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53);
2398 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53);
2399 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53);
2400 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53);
2401 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53);
2402 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53);
2403 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53);
2404 sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53);
2405 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53);
2406 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53);
2407 sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
2408 }
2409
2410 sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK);
2411
2412 for (i = 0; i < hw->ports; i++)
2413 sky2_phy_reset(hw, i);
2414
2415 memset(hw->st_le, 0, STATUS_LE_BYTES);
2416 hw->st_idx = 0;
2417
2418 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET);
2419 sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR);
2420
2421 sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma);
2422 sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32);
2423
2424 /* Set the list last index */
2425 sky2_write16(hw, STAT_LAST_IDX, STATUS_RING_SIZE - 1);
2426
2427 sky2_write16(hw, STAT_TX_IDX_TH, 10);
2428 sky2_write8(hw, STAT_FIFO_WM, 16);
2429
2430 /* set Status-FIFO ISR watermark */
2431 if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0)
2432 sky2_write8(hw, STAT_FIFO_ISR_WM, 4);
2433 else
2434 sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
2435
2436 sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
2437 sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
2438 sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
2439
2440 /* enable status unit */
2441 sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON);
2442
2443 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
2444 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
2445 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
2446
2447 return 0;
2448 }
2449
2450 static u32 sky2_supported_modes(const struct sky2_hw *hw)
2451 {
2452 u32 modes;
2453 if (hw->copper) {
2454 modes = SUPPORTED_10baseT_Half
2455 | SUPPORTED_10baseT_Full
2456 | SUPPORTED_100baseT_Half
2457 | SUPPORTED_100baseT_Full
2458 | SUPPORTED_Autoneg | SUPPORTED_TP;
2459
2460 if (hw->chip_id != CHIP_ID_YUKON_FE)
2461 modes |= SUPPORTED_1000baseT_Half
2462 | SUPPORTED_1000baseT_Full;
2463 } else
2464 modes = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE
2465 | SUPPORTED_Autoneg;
2466 return modes;
2467 }
2468
2469 static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
2470 {
2471 struct sky2_port *sky2 = netdev_priv(dev);
2472 struct sky2_hw *hw = sky2->hw;
2473
2474 ecmd->transceiver = XCVR_INTERNAL;
2475 ecmd->supported = sky2_supported_modes(hw);
2476 ecmd->phy_address = PHY_ADDR_MARV;
2477 if (hw->copper) {
2478 ecmd->supported = SUPPORTED_10baseT_Half
2479 | SUPPORTED_10baseT_Full
2480 | SUPPORTED_100baseT_Half
2481 | SUPPORTED_100baseT_Full
2482 | SUPPORTED_1000baseT_Half
2483 | SUPPORTED_1000baseT_Full
2484 | SUPPORTED_Autoneg | SUPPORTED_TP;
2485 ecmd->port = PORT_TP;
2486 } else
2487 ecmd->port = PORT_FIBRE;
2488
2489 ecmd->advertising = sky2->advertising;
2490 ecmd->autoneg = sky2->autoneg;
2491 ecmd->speed = sky2->speed;
2492 ecmd->duplex = sky2->duplex;
2493 return 0;
2494 }
2495
2496 static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
2497 {
2498 struct sky2_port *sky2 = netdev_priv(dev);
2499 const struct sky2_hw *hw = sky2->hw;
2500 u32 supported = sky2_supported_modes(hw);
2501
2502 if (ecmd->autoneg == AUTONEG_ENABLE) {
2503 ecmd->advertising = supported;
2504 sky2->duplex = -1;
2505 sky2->speed = -1;
2506 } else {
2507 u32 setting;
2508
2509 switch (ecmd->speed) {
2510 case SPEED_1000:
2511 if (ecmd->duplex == DUPLEX_FULL)
2512 setting = SUPPORTED_1000baseT_Full;
2513 else if (ecmd->duplex == DUPLEX_HALF)
2514 setting = SUPPORTED_1000baseT_Half;
2515 else
2516 return -EINVAL;
2517 break;
2518 case SPEED_100:
2519 if (ecmd->duplex == DUPLEX_FULL)
2520 setting = SUPPORTED_100baseT_Full;
2521 else if (ecmd->duplex == DUPLEX_HALF)
2522 setting = SUPPORTED_100baseT_Half;
2523 else
2524 return -EINVAL;
2525 break;
2526
2527 case SPEED_10:
2528 if (ecmd->duplex == DUPLEX_FULL)
2529 setting = SUPPORTED_10baseT_Full;
2530 else if (ecmd->duplex == DUPLEX_HALF)
2531 setting = SUPPORTED_10baseT_Half;
2532 else
2533 return -EINVAL;
2534 break;
2535 default:
2536 return -EINVAL;
2537 }
2538
2539 if ((setting & supported) == 0)
2540 return -EINVAL;
2541
2542 sky2->speed = ecmd->speed;
2543 sky2->duplex = ecmd->duplex;
2544 }
2545
2546 sky2->autoneg = ecmd->autoneg;
2547 sky2->advertising = ecmd->advertising;
2548
2549 if (netif_running(dev))
2550 sky2_phy_reinit(sky2);
2551
2552 return 0;
2553 }
2554
2555 static void sky2_get_drvinfo(struct net_device *dev,
2556 struct ethtool_drvinfo *info)
2557 {
2558 struct sky2_port *sky2 = netdev_priv(dev);
2559
2560 strcpy(info->driver, DRV_NAME);
2561 strcpy(info->version, DRV_VERSION);
2562 strcpy(info->fw_version, "N/A");
2563 strcpy(info->bus_info, pci_name(sky2->hw->pdev));
2564 }
2565
2566 static const struct sky2_stat {
2567 char name[ETH_GSTRING_LEN];
2568 u16 offset;
2569 } sky2_stats[] = {
2570 { "tx_bytes", GM_TXO_OK_HI },
2571 { "rx_bytes", GM_RXO_OK_HI },
2572 { "tx_broadcast", GM_TXF_BC_OK },
2573 { "rx_broadcast", GM_RXF_BC_OK },
2574 { "tx_multicast", GM_TXF_MC_OK },
2575 { "rx_multicast", GM_RXF_MC_OK },
2576 { "tx_unicast", GM_TXF_UC_OK },
2577 { "rx_unicast", GM_RXF_UC_OK },
2578 { "tx_mac_pause", GM_TXF_MPAUSE },
2579 { "rx_mac_pause", GM_RXF_MPAUSE },
2580 { "collisions", GM_TXF_COL },
2581 { "late_collision",GM_TXF_LAT_COL },
2582 { "aborted", GM_TXF_ABO_COL },
2583 { "single_collisions", GM_TXF_SNG_COL },
2584 { "multi_collisions", GM_TXF_MUL_COL },
2585
2586 { "rx_short", GM_RXF_SHT },
2587 { "rx_runt", GM_RXE_FRAG },
2588 { "rx_64_byte_packets", GM_RXF_64B },
2589 { "rx_65_to_127_byte_packets", GM_RXF_127B },
2590 { "rx_128_to_255_byte_packets", GM_RXF_255B },
2591 { "rx_256_to_511_byte_packets", GM_RXF_511B },
2592 { "rx_512_to_1023_byte_packets", GM_RXF_1023B },
2593 { "rx_1024_to_1518_byte_packets", GM_RXF_1518B },
2594 { "rx_1518_to_max_byte_packets", GM_RXF_MAX_SZ },
2595 { "rx_too_long", GM_RXF_LNG_ERR },
2596 { "rx_fifo_overflow", GM_RXE_FIFO_OV },
2597 { "rx_jabber", GM_RXF_JAB_PKT },
2598 { "rx_fcs_error", GM_RXF_FCS_ERR },
2599
2600 { "tx_64_byte_packets", GM_TXF_64B },
2601 { "tx_65_to_127_byte_packets", GM_TXF_127B },
2602 { "tx_128_to_255_byte_packets", GM_TXF_255B },
2603 { "tx_256_to_511_byte_packets", GM_TXF_511B },
2604 { "tx_512_to_1023_byte_packets", GM_TXF_1023B },
2605 { "tx_1024_to_1518_byte_packets", GM_TXF_1518B },
2606 { "tx_1519_to_max_byte_packets", GM_TXF_MAX_SZ },
2607 { "tx_fifo_underrun", GM_TXE_FIFO_UR },
2608 };
2609
2610 static u32 sky2_get_rx_csum(struct net_device *dev)
2611 {
2612 struct sky2_port *sky2 = netdev_priv(dev);
2613
2614 return sky2->rx_csum;
2615 }
2616
2617 static int sky2_set_rx_csum(struct net_device *dev, u32 data)
2618 {
2619 struct sky2_port *sky2 = netdev_priv(dev);
2620
2621 sky2->rx_csum = data;
2622
2623 sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
2624 data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
2625
2626 return 0;
2627 }
2628
2629 static u32 sky2_get_msglevel(struct net_device *netdev)
2630 {
2631 struct sky2_port *sky2 = netdev_priv(netdev);
2632 return sky2->msg_enable;
2633 }
2634
2635 static int sky2_nway_reset(struct net_device *dev)
2636 {
2637 struct sky2_port *sky2 = netdev_priv(dev);
2638
2639 if (sky2->autoneg != AUTONEG_ENABLE)
2640 return -EINVAL;
2641
2642 sky2_phy_reinit(sky2);
2643
2644 return 0;
2645 }
2646
2647 static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count)
2648 {
2649 struct sky2_hw *hw = sky2->hw;
2650 unsigned port = sky2->port;
2651 int i;
2652
2653 data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32
2654 | (u64) gma_read32(hw, port, GM_TXO_OK_LO);
2655 data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32
2656 | (u64) gma_read32(hw, port, GM_RXO_OK_LO);
2657
2658 for (i = 2; i < count; i++)
2659 data[i] = (u64) gma_read32(hw, port, sky2_stats[i].offset);
2660 }
2661
2662 static void sky2_set_msglevel(struct net_device *netdev, u32 value)
2663 {
2664 struct sky2_port *sky2 = netdev_priv(netdev);
2665 sky2->msg_enable = value;
2666 }
2667
2668 static int sky2_get_stats_count(struct net_device *dev)
2669 {
2670 return ARRAY_SIZE(sky2_stats);
2671 }
2672
2673 static void sky2_get_ethtool_stats(struct net_device *dev,
2674 struct ethtool_stats *stats, u64 * data)
2675 {
2676 struct sky2_port *sky2 = netdev_priv(dev);
2677
2678 sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats));
2679 }
2680
2681 static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data)
2682 {
2683 int i;
2684
2685 switch (stringset) {
2686 case ETH_SS_STATS:
2687 for (i = 0; i < ARRAY_SIZE(sky2_stats); i++)
2688 memcpy(data + i * ETH_GSTRING_LEN,
2689 sky2_stats[i].name, ETH_GSTRING_LEN);
2690 break;
2691 }
2692 }
2693
2694 /* Use hardware MIB variables for critical path statistics and
2695 * transmit feedback not reported at interrupt.
2696 * Other errors are accounted for in interrupt handler.
2697 */
2698 static struct net_device_stats *sky2_get_stats(struct net_device *dev)
2699 {
2700 struct sky2_port *sky2 = netdev_priv(dev);
2701 u64 data[13];
2702
2703 sky2_phy_stats(sky2, data, ARRAY_SIZE(data));
2704
2705 sky2->net_stats.tx_bytes = data[0];
2706 sky2->net_stats.rx_bytes = data[1];
2707 sky2->net_stats.tx_packets = data[2] + data[4] + data[6];
2708 sky2->net_stats.rx_packets = data[3] + data[5] + data[7];
2709 sky2->net_stats.multicast = data[3] + data[5];
2710 sky2->net_stats.collisions = data[10];
2711 sky2->net_stats.tx_aborted_errors = data[12];
2712
2713 return &sky2->net_stats;
2714 }
2715
2716 static int sky2_set_mac_address(struct net_device *dev, void *p)
2717 {
2718 struct sky2_port *sky2 = netdev_priv(dev);
2719 struct sky2_hw *hw = sky2->hw;
2720 unsigned port = sky2->port;
2721 const struct sockaddr *addr = p;
2722
2723 if (!is_valid_ether_addr(addr->sa_data))
2724 return -EADDRNOTAVAIL;
2725
2726 memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
2727 memcpy_toio(hw->regs + B2_MAC_1 + port * 8,
2728 dev->dev_addr, ETH_ALEN);
2729 memcpy_toio(hw->regs + B2_MAC_2 + port * 8,
2730 dev->dev_addr, ETH_ALEN);
2731
2732 /* virtual address for data */
2733 gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
2734
2735 /* physical address: used for pause frames */
2736 gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
2737
2738 return 0;
2739 }
2740
2741 static void sky2_set_multicast(struct net_device *dev)
2742 {
2743 struct sky2_port *sky2 = netdev_priv(dev);
2744 struct sky2_hw *hw = sky2->hw;
2745 unsigned port = sky2->port;
2746 struct dev_mc_list *list = dev->mc_list;
2747 u16 reg;
2748 u8 filter[8];
2749
2750 memset(filter, 0, sizeof(filter));
2751
2752 reg = gma_read16(hw, port, GM_RX_CTRL);
2753 reg |= GM_RXCR_UCF_ENA;
2754
2755 if (dev->flags & IFF_PROMISC) /* promiscuous */
2756 reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
2757 else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > 16) /* all multicast */
2758 memset(filter, 0xff, sizeof(filter));
2759 else if (dev->mc_count == 0) /* no multicast */
2760 reg &= ~GM_RXCR_MCF_ENA;
2761 else {
2762 int i;
2763 reg |= GM_RXCR_MCF_ENA;
2764
2765 for (i = 0; list && i < dev->mc_count; i++, list = list->next) {
2766 u32 bit = ether_crc(ETH_ALEN, list->dmi_addr) & 0x3f;
2767 filter[bit / 8] |= 1 << (bit % 8);
2768 }
2769 }
2770
2771 gma_write16(hw, port, GM_MC_ADDR_H1,
2772 (u16) filter[0] | ((u16) filter[1] << 8));
2773 gma_write16(hw, port, GM_MC_ADDR_H2,
2774 (u16) filter[2] | ((u16) filter[3] << 8));
2775 gma_write16(hw, port, GM_MC_ADDR_H3,
2776 (u16) filter[4] | ((u16) filter[5] << 8));
2777 gma_write16(hw, port, GM_MC_ADDR_H4,
2778 (u16) filter[6] | ((u16) filter[7] << 8));
2779
2780 gma_write16(hw, port, GM_RX_CTRL, reg);
2781 }
2782
2783 /* Can have one global because blinking is controlled by
2784 * ethtool and that is always under RTNL mutex
2785 */
2786 static void sky2_led(struct sky2_hw *hw, unsigned port, int on)
2787 {
2788 u16 pg;
2789
2790 switch (hw->chip_id) {
2791 case CHIP_ID_YUKON_XL:
2792 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
2793 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
2794 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
2795 on ? (PHY_M_LEDC_LOS_CTRL(1) |
2796 PHY_M_LEDC_INIT_CTRL(7) |
2797 PHY_M_LEDC_STA1_CTRL(7) |
2798 PHY_M_LEDC_STA0_CTRL(7))
2799 : 0);
2800
2801 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
2802 break;
2803
2804 default:
2805 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
2806 gm_phy_write(hw, port, PHY_MARV_LED_OVER,
2807 on ? PHY_M_LED_MO_DUP(MO_LED_ON) |
2808 PHY_M_LED_MO_10(MO_LED_ON) |
2809 PHY_M_LED_MO_100(MO_LED_ON) |
2810 PHY_M_LED_MO_1000(MO_LED_ON) |
2811 PHY_M_LED_MO_RX(MO_LED_ON)
2812 : PHY_M_LED_MO_DUP(MO_LED_OFF) |
2813 PHY_M_LED_MO_10(MO_LED_OFF) |
2814 PHY_M_LED_MO_100(MO_LED_OFF) |
2815 PHY_M_LED_MO_1000(MO_LED_OFF) |
2816 PHY_M_LED_MO_RX(MO_LED_OFF));
2817
2818 }
2819 }
2820
2821 /* blink LED's for finding board */
2822 static int sky2_phys_id(struct net_device *dev, u32 data)
2823 {
2824 struct sky2_port *sky2 = netdev_priv(dev);
2825 struct sky2_hw *hw = sky2->hw;
2826 unsigned port = sky2->port;
2827 u16 ledctrl, ledover = 0;
2828 long ms;
2829 int interrupted;
2830 int onoff = 1;
2831
2832 if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ))
2833 ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT);
2834 else
2835 ms = data * 1000;
2836
2837 /* save initial values */
2838 spin_lock_bh(&sky2->phy_lock);
2839 if (hw->chip_id == CHIP_ID_YUKON_XL) {
2840 u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
2841 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
2842 ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
2843 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
2844 } else {
2845 ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL);
2846 ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER);
2847 }
2848
2849 interrupted = 0;
2850 while (!interrupted && ms > 0) {
2851 sky2_led(hw, port, onoff);
2852 onoff = !onoff;
2853
2854 spin_unlock_bh(&sky2->phy_lock);
2855 interrupted = msleep_interruptible(250);
2856 spin_lock_bh(&sky2->phy_lock);
2857
2858 ms -= 250;
2859 }
2860
2861 /* resume regularly scheduled programming */
2862 if (hw->chip_id == CHIP_ID_YUKON_XL) {
2863 u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
2864 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
2865 gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl);
2866 gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
2867 } else {
2868 gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
2869 gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
2870 }
2871 spin_unlock_bh(&sky2->phy_lock);
2872
2873 return 0;
2874 }
2875
2876 static void sky2_get_pauseparam(struct net_device *dev,
2877 struct ethtool_pauseparam *ecmd)
2878 {
2879 struct sky2_port *sky2 = netdev_priv(dev);
2880
2881 ecmd->tx_pause = sky2->tx_pause;
2882 ecmd->rx_pause = sky2->rx_pause;
2883 ecmd->autoneg = sky2->autoneg;
2884 }
2885
2886 static int sky2_set_pauseparam(struct net_device *dev,
2887 struct ethtool_pauseparam *ecmd)
2888 {
2889 struct sky2_port *sky2 = netdev_priv(dev);
2890 int err = 0;
2891
2892 sky2->autoneg = ecmd->autoneg;
2893 sky2->tx_pause = ecmd->tx_pause != 0;
2894 sky2->rx_pause = ecmd->rx_pause != 0;
2895
2896 sky2_phy_reinit(sky2);
2897
2898 return err;
2899 }
2900
2901 static int sky2_get_coalesce(struct net_device *dev,
2902 struct ethtool_coalesce *ecmd)
2903 {
2904 struct sky2_port *sky2 = netdev_priv(dev);
2905 struct sky2_hw *hw = sky2->hw;
2906
2907 if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP)
2908 ecmd->tx_coalesce_usecs = 0;
2909 else {
2910 u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI);
2911 ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks);
2912 }
2913 ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH);
2914
2915 if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP)
2916 ecmd->rx_coalesce_usecs = 0;
2917 else {
2918 u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI);
2919 ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks);
2920 }
2921 ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM);
2922
2923 if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP)
2924 ecmd->rx_coalesce_usecs_irq = 0;
2925 else {
2926 u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI);
2927 ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks);
2928 }
2929
2930 ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM);
2931
2932 return 0;
2933 }
2934
2935 /* Note: this affect both ports */
2936 static int sky2_set_coalesce(struct net_device *dev,
2937 struct ethtool_coalesce *ecmd)
2938 {
2939 struct sky2_port *sky2 = netdev_priv(dev);
2940 struct sky2_hw *hw = sky2->hw;
2941 const u32 tmax = sky2_clk2us(hw, 0x0ffffff);
2942
2943 if (ecmd->tx_coalesce_usecs > tmax ||
2944 ecmd->rx_coalesce_usecs > tmax ||
2945 ecmd->rx_coalesce_usecs_irq > tmax)
2946 return -EINVAL;
2947
2948 if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1)
2949 return -EINVAL;
2950 if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
2951 return -EINVAL;
2952 if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
2953 return -EINVAL;
2954
2955 if (ecmd->tx_coalesce_usecs == 0)
2956 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
2957 else {
2958 sky2_write32(hw, STAT_TX_TIMER_INI,
2959 sky2_us2clk(hw, ecmd->tx_coalesce_usecs));
2960 sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
2961 }
2962 sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames);
2963
2964 if (ecmd->rx_coalesce_usecs == 0)
2965 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
2966 else {
2967 sky2_write32(hw, STAT_LEV_TIMER_INI,
2968 sky2_us2clk(hw, ecmd->rx_coalesce_usecs));
2969 sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
2970 }
2971 sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames);
2972
2973 if (ecmd->rx_coalesce_usecs_irq == 0)
2974 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP);
2975 else {
2976 sky2_write32(hw, STAT_ISR_TIMER_INI,
2977 sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq));
2978 sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
2979 }
2980 sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq);
2981 return 0;
2982 }
2983
2984 static void sky2_get_ringparam(struct net_device *dev,
2985 struct ethtool_ringparam *ering)
2986 {
2987 struct sky2_port *sky2 = netdev_priv(dev);
2988
2989 ering->rx_max_pending = RX_MAX_PENDING;
2990 ering->rx_mini_max_pending = 0;
2991 ering->rx_jumbo_max_pending = 0;
2992 ering->tx_max_pending = TX_RING_SIZE - 1;
2993
2994 ering->rx_pending = sky2->rx_pending;
2995 ering->rx_mini_pending = 0;
2996 ering->rx_jumbo_pending = 0;
2997 ering->tx_pending = sky2->tx_pending;
2998 }
2999
3000 static int sky2_set_ringparam(struct net_device *dev,
3001 struct ethtool_ringparam *ering)
3002 {
3003 struct sky2_port *sky2 = netdev_priv(dev);
3004 int err = 0;
3005
3006 if (ering->rx_pending > RX_MAX_PENDING ||
3007 ering->rx_pending < 8 ||
3008 ering->tx_pending < MAX_SKB_TX_LE ||
3009 ering->tx_pending > TX_RING_SIZE - 1)
3010 return -EINVAL;
3011
3012 if (netif_running(dev))
3013 sky2_down(dev);
3014
3015 sky2->rx_pending = ering->rx_pending;
3016 sky2->tx_pending = ering->tx_pending;
3017
3018 if (netif_running(dev)) {
3019 err = sky2_up(dev);
3020 if (err)
3021 dev_close(dev);
3022 else
3023 sky2_set_multicast(dev);
3024 }
3025
3026 return err;
3027 }
3028
3029 static int sky2_get_regs_len(struct net_device *dev)
3030 {
3031 return 0x4000;
3032 }
3033
3034 /*
3035 * Returns copy of control register region
3036 * Note: access to the RAM address register set will cause timeouts.
3037 */
3038 static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
3039 void *p)
3040 {
3041 const struct sky2_port *sky2 = netdev_priv(dev);
3042 const void __iomem *io = sky2->hw->regs;
3043
3044 BUG_ON(regs->len < B3_RI_WTO_R1);
3045 regs->version = 1;
3046 memset(p, 0, regs->len);
3047
3048 memcpy_fromio(p, io, B3_RAM_ADDR);
3049
3050 memcpy_fromio(p + B3_RI_WTO_R1,
3051 io + B3_RI_WTO_R1,
3052 regs->len - B3_RI_WTO_R1);
3053 }
3054
3055 static struct ethtool_ops sky2_ethtool_ops = {
3056 .get_settings = sky2_get_settings,
3057 .set_settings = sky2_set_settings,
3058 .get_drvinfo = sky2_get_drvinfo,
3059 .get_msglevel = sky2_get_msglevel,
3060 .set_msglevel = sky2_set_msglevel,
3061 .nway_reset = sky2_nway_reset,
3062 .get_regs_len = sky2_get_regs_len,
3063 .get_regs = sky2_get_regs,
3064 .get_link = ethtool_op_get_link,
3065 .get_sg = ethtool_op_get_sg,
3066 .set_sg = ethtool_op_set_sg,
3067 .get_tx_csum = ethtool_op_get_tx_csum,
3068 .set_tx_csum = ethtool_op_set_tx_csum,
3069 .get_tso = ethtool_op_get_tso,
3070 .set_tso = ethtool_op_set_tso,
3071 .get_rx_csum = sky2_get_rx_csum,
3072 .set_rx_csum = sky2_set_rx_csum,
3073 .get_strings = sky2_get_strings,
3074 .get_coalesce = sky2_get_coalesce,
3075 .set_coalesce = sky2_set_coalesce,
3076 .get_ringparam = sky2_get_ringparam,
3077 .set_ringparam = sky2_set_ringparam,
3078 .get_pauseparam = sky2_get_pauseparam,
3079 .set_pauseparam = sky2_set_pauseparam,
3080 .phys_id = sky2_phys_id,
3081 .get_stats_count = sky2_get_stats_count,
3082 .get_ethtool_stats = sky2_get_ethtool_stats,
3083 .get_perm_addr = ethtool_op_get_perm_addr,
3084 };
3085
3086 /* Initialize network device */
3087 static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
3088 unsigned port, int highmem)
3089 {
3090 struct sky2_port *sky2;
3091 struct net_device *dev = alloc_etherdev(sizeof(*sky2));
3092
3093 if (!dev) {
3094 printk(KERN_ERR "sky2 etherdev alloc failed");
3095 return NULL;
3096 }
3097
3098 SET_MODULE_OWNER(dev);
3099 SET_NETDEV_DEV(dev, &hw->pdev->dev);
3100 dev->irq = hw->pdev->irq;
3101 dev->open = sky2_up;
3102 dev->stop = sky2_down;
3103 dev->do_ioctl = sky2_ioctl;
3104 dev->hard_start_xmit = sky2_xmit_frame;
3105 dev->get_stats = sky2_get_stats;
3106 dev->set_multicast_list = sky2_set_multicast;
3107 dev->set_mac_address = sky2_set_mac_address;
3108 dev->change_mtu = sky2_change_mtu;
3109 SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops);
3110 dev->tx_timeout = sky2_tx_timeout;
3111 dev->watchdog_timeo = TX_WATCHDOG;
3112 if (port == 0)
3113 dev->poll = sky2_poll;
3114 dev->weight = NAPI_WEIGHT;
3115 #ifdef CONFIG_NET_POLL_CONTROLLER
3116 dev->poll_controller = sky2_netpoll;
3117 #endif
3118
3119 sky2 = netdev_priv(dev);
3120 sky2->netdev = dev;
3121 sky2->hw = hw;
3122 sky2->msg_enable = netif_msg_init(debug, default_msg);
3123
3124 spin_lock_init(&sky2->tx_lock);
3125 /* Auto speed and flow control */
3126 sky2->autoneg = AUTONEG_ENABLE;
3127 sky2->tx_pause = 1;
3128 sky2->rx_pause = 1;
3129 sky2->duplex = -1;
3130 sky2->speed = -1;
3131 sky2->advertising = sky2_supported_modes(hw);
3132 sky2->rx_csum = 1;
3133
3134 spin_lock_init(&sky2->phy_lock);
3135 sky2->tx_pending = TX_DEF_PENDING;
3136 sky2->rx_pending = RX_DEF_PENDING;
3137 sky2->rx_bufsize = sky2_buf_size(ETH_DATA_LEN);
3138
3139 hw->dev[port] = dev;
3140
3141 sky2->port = port;
3142
3143 dev->features |= NETIF_F_LLTX;
3144 if (hw->chip_id != CHIP_ID_YUKON_EC_U)
3145 dev->features |= NETIF_F_TSO;
3146 if (highmem)
3147 dev->features |= NETIF_F_HIGHDMA;
3148 dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
3149
3150 #ifdef SKY2_VLAN_TAG_USED
3151 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
3152 dev->vlan_rx_register = sky2_vlan_rx_register;
3153 dev->vlan_rx_kill_vid = sky2_vlan_rx_kill_vid;
3154 #endif
3155
3156 /* read the mac address */
3157 memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
3158 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
3159
3160 /* device is off until link detection */
3161 netif_carrier_off(dev);
3162 netif_stop_queue(dev);
3163
3164 return dev;
3165 }
3166
3167 static void __devinit sky2_show_addr(struct net_device *dev)
3168 {
3169 const struct sky2_port *sky2 = netdev_priv(dev);
3170
3171 if (netif_msg_probe(sky2))
3172 printk(KERN_INFO PFX "%s: addr %02x:%02x:%02x:%02x:%02x:%02x\n",
3173 dev->name,
3174 dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
3175 dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
3176 }
3177
3178 /* Handle software interrupt used during MSI test */
3179 static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id,
3180 struct pt_regs *regs)
3181 {
3182 struct sky2_hw *hw = dev_id;
3183 u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
3184
3185 if (status == 0)
3186 return IRQ_NONE;
3187
3188 if (status & Y2_IS_IRQ_SW) {
3189 hw->msi_detected = 1;
3190 wake_up(&hw->msi_wait);
3191 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
3192 }
3193 sky2_write32(hw, B0_Y2_SP_ICR, 2);
3194
3195 return IRQ_HANDLED;
3196 }
3197
3198 /* Test interrupt path by forcing a a software IRQ */
3199 static int __devinit sky2_test_msi(struct sky2_hw *hw)
3200 {
3201 struct pci_dev *pdev = hw->pdev;
3202 int err;
3203
3204 sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
3205
3206 err = request_irq(pdev->irq, sky2_test_intr, IRQF_SHARED, DRV_NAME, hw);
3207 if (err) {
3208 printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
3209 pci_name(pdev), pdev->irq);
3210 return err;
3211 }
3212
3213 init_waitqueue_head (&hw->msi_wait);
3214
3215 sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
3216 wmb();
3217
3218 wait_event_timeout(hw->msi_wait, hw->msi_detected, HZ/10);
3219
3220 if (!hw->msi_detected) {
3221 /* MSI test failed, go back to INTx mode */
3222 printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
3223 "switching to INTx mode. Please report this failure to "
3224 "the PCI maintainer and include system chipset information.\n",
3225 pci_name(pdev));
3226
3227 err = -EOPNOTSUPP;
3228 sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
3229 }
3230
3231 sky2_write32(hw, B0_IMSK, 0);
3232
3233 free_irq(pdev->irq, hw);
3234
3235 return err;
3236 }
3237
3238 static int __devinit sky2_probe(struct pci_dev *pdev,
3239 const struct pci_device_id *ent)
3240 {
3241 struct net_device *dev, *dev1 = NULL;
3242 struct sky2_hw *hw;
3243 int err, pm_cap, using_dac = 0;
3244
3245 err = pci_enable_device(pdev);
3246 if (err) {
3247 printk(KERN_ERR PFX "%s cannot enable PCI device\n",
3248 pci_name(pdev));
3249 goto err_out;
3250 }
3251
3252 err = pci_request_regions(pdev, DRV_NAME);
3253 if (err) {
3254 printk(KERN_ERR PFX "%s cannot obtain PCI resources\n",
3255 pci_name(pdev));
3256 goto err_out;
3257 }
3258
3259 pci_set_master(pdev);
3260
3261 /* Find power-management capability. */
3262 pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
3263 if (pm_cap == 0) {
3264 printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
3265 "aborting.\n");
3266 err = -EIO;
3267 goto err_out_free_regions;
3268 }
3269
3270 if (sizeof(dma_addr_t) > sizeof(u32) &&
3271 !(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
3272 using_dac = 1;
3273 err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
3274 if (err < 0) {
3275 printk(KERN_ERR PFX "%s unable to obtain 64 bit DMA "
3276 "for consistent allocations\n", pci_name(pdev));
3277 goto err_out_free_regions;
3278 }
3279
3280 } else {
3281 err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
3282 if (err) {
3283 printk(KERN_ERR PFX "%s no usable DMA configuration\n",
3284 pci_name(pdev));
3285 goto err_out_free_regions;
3286 }
3287 }
3288
3289 err = -ENOMEM;
3290 hw = kzalloc(sizeof(*hw), GFP_KERNEL);
3291 if (!hw) {
3292 printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n",
3293 pci_name(pdev));
3294 goto err_out_free_regions;
3295 }
3296
3297 hw->pdev = pdev;
3298
3299 hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
3300 if (!hw->regs) {
3301 printk(KERN_ERR PFX "%s: cannot map device registers\n",
3302 pci_name(pdev));
3303 goto err_out_free_hw;
3304 }
3305 hw->pm_cap = pm_cap;
3306
3307 #ifdef __BIG_ENDIAN
3308 /* byte swap descriptors in hardware */
3309 {
3310 u32 reg;
3311
3312 reg = sky2_pci_read32(hw, PCI_DEV_REG2);
3313 reg |= PCI_REV_DESC;
3314 sky2_pci_write32(hw, PCI_DEV_REG2, reg);
3315 }
3316 #endif
3317
3318 /* ring for status responses */
3319 hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,
3320 &hw->st_dma);
3321 if (!hw->st_le)
3322 goto err_out_iounmap;
3323
3324 err = sky2_reset(hw);
3325 if (err)
3326 goto err_out_iounmap;
3327
3328 printk(KERN_INFO PFX "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n",
3329 DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0),
3330 pdev->irq, yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
3331 hw->chip_id, hw->chip_rev);
3332
3333 dev = sky2_init_netdev(hw, 0, using_dac);
3334 if (!dev)
3335 goto err_out_free_pci;
3336
3337 err = register_netdev(dev);
3338 if (err) {
3339 printk(KERN_ERR PFX "%s: cannot register net device\n",
3340 pci_name(pdev));
3341 goto err_out_free_netdev;
3342 }
3343
3344 sky2_show_addr(dev);
3345
3346 if (hw->ports > 1 && (dev1 = sky2_init_netdev(hw, 1, using_dac))) {
3347 if (register_netdev(dev1) == 0)
3348 sky2_show_addr(dev1);
3349 else {
3350 /* Failure to register second port need not be fatal */
3351 printk(KERN_WARNING PFX
3352 "register of second port failed\n");
3353 hw->dev[1] = NULL;
3354 free_netdev(dev1);
3355 }
3356 }
3357
3358 if (!disable_msi && pci_enable_msi(pdev) == 0) {
3359 err = sky2_test_msi(hw);
3360 if (err == -EOPNOTSUPP)
3361 pci_disable_msi(pdev);
3362 else if (err)
3363 goto err_out_unregister;
3364 }
3365
3366 err = request_irq(pdev->irq, sky2_intr, IRQF_SHARED, DRV_NAME, hw);
3367 if (err) {
3368 printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
3369 pci_name(pdev), pdev->irq);
3370 goto err_out_unregister;
3371 }
3372
3373 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
3374
3375 setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
3376 sky2_idle_start(hw);
3377
3378 pci_set_drvdata(pdev, hw);
3379
3380 return 0;
3381
3382 err_out_unregister:
3383 pci_disable_msi(pdev);
3384 if (dev1) {
3385 unregister_netdev(dev1);
3386 free_netdev(dev1);
3387 }
3388 unregister_netdev(dev);
3389 err_out_free_netdev:
3390 free_netdev(dev);
3391 err_out_free_pci:
3392 sky2_write8(hw, B0_CTST, CS_RST_SET);
3393 pci_free_consistent(hw->pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
3394 err_out_iounmap:
3395 iounmap(hw->regs);
3396 err_out_free_hw:
3397 kfree(hw);
3398 err_out_free_regions:
3399 pci_release_regions(pdev);
3400 pci_disable_device(pdev);
3401 err_out:
3402 return err;
3403 }
3404
3405 static void __devexit sky2_remove(struct pci_dev *pdev)
3406 {
3407 struct sky2_hw *hw = pci_get_drvdata(pdev);
3408 struct net_device *dev0, *dev1;
3409
3410 if (!hw)
3411 return;
3412
3413 del_timer_sync(&hw->idle_timer);
3414
3415 sky2_write32(hw, B0_IMSK, 0);
3416 synchronize_irq(hw->pdev->irq);
3417
3418 dev0 = hw->dev[0];
3419 dev1 = hw->dev[1];
3420 if (dev1)
3421 unregister_netdev(dev1);
3422 unregister_netdev(dev0);
3423
3424 sky2_set_power_state(hw, PCI_D3hot);
3425 sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
3426 sky2_write8(hw, B0_CTST, CS_RST_SET);
3427 sky2_read8(hw, B0_CTST);
3428
3429 free_irq(pdev->irq, hw);
3430 pci_disable_msi(pdev);
3431 pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
3432 pci_release_regions(pdev);
3433 pci_disable_device(pdev);
3434
3435 if (dev1)
3436 free_netdev(dev1);
3437 free_netdev(dev0);
3438 iounmap(hw->regs);
3439 kfree(hw);
3440
3441 pci_set_drvdata(pdev, NULL);
3442 }
3443
3444 #ifdef CONFIG_PM
3445 static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
3446 {
3447 struct sky2_hw *hw = pci_get_drvdata(pdev);
3448 int i;
3449 pci_power_t pstate = pci_choose_state(pdev, state);
3450
3451 if (!(pstate == PCI_D3hot || pstate == PCI_D3cold))
3452 return -EINVAL;
3453
3454 del_timer_sync(&hw->idle_timer);
3455 netif_poll_disable(hw->dev[0]);
3456
3457 for (i = 0; i < hw->ports; i++) {
3458 struct net_device *dev = hw->dev[i];
3459
3460 if (netif_running(dev)) {
3461 sky2_down(dev);
3462 netif_device_detach(dev);
3463 }
3464 }
3465
3466 sky2_write32(hw, B0_IMSK, 0);
3467 pci_save_state(pdev);
3468 sky2_set_power_state(hw, pstate);
3469 return 0;
3470 }
3471
3472 static int sky2_resume(struct pci_dev *pdev)
3473 {
3474 struct sky2_hw *hw = pci_get_drvdata(pdev);
3475 int i, err;
3476
3477 pci_restore_state(pdev);
3478 pci_enable_wake(pdev, PCI_D0, 0);
3479 sky2_set_power_state(hw, PCI_D0);
3480
3481 err = sky2_reset(hw);
3482 if (err)
3483 goto out;
3484
3485 sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
3486
3487 for (i = 0; i < hw->ports; i++) {
3488 struct net_device *dev = hw->dev[i];
3489 if (netif_running(dev)) {
3490 netif_device_attach(dev);
3491
3492 err = sky2_up(dev);
3493 if (err) {
3494 printk(KERN_ERR PFX "%s: could not up: %d\n",
3495 dev->name, err);
3496 dev_close(dev);
3497 goto out;
3498 }
3499 }
3500 }
3501
3502 netif_poll_enable(hw->dev[0]);
3503 sky2_idle_start(hw);
3504 out:
3505 return err;
3506 }
3507 #endif
3508
3509 static struct pci_driver sky2_driver = {
3510 .name = DRV_NAME,
3511 .id_table = sky2_id_table,
3512 .probe = sky2_probe,
3513 .remove = __devexit_p(sky2_remove),
3514 #ifdef CONFIG_PM
3515 .suspend = sky2_suspend,
3516 .resume = sky2_resume,
3517 #endif
3518 };
3519
3520 static int __init sky2_init_module(void)
3521 {
3522 return pci_register_driver(&sky2_driver);
3523 }
3524
3525 static void __exit sky2_cleanup_module(void)
3526 {
3527 pci_unregister_driver(&sky2_driver);
3528 }
3529
3530 module_init(sky2_init_module);
3531 module_exit(sky2_cleanup_module);
3532
3533 MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
3534 MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
3535 MODULE_LICENSE("GPL");
3536 MODULE_VERSION(DRV_VERSION);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree