x86: setup_smep needs to be __cpuinit
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / x86 / kernel / cpu / common.c
blobc8b41623377f14462a248b245ffab97792e9409c
1 #include <linux/bootmem.h>
2 #include <linux/linkage.h>
3 #include <linux/bitops.h>
4 #include <linux/kernel.h>
5 #include <linux/module.h>
6 #include <linux/percpu.h>
7 #include <linux/string.h>
8 #include <linux/delay.h>
9 #include <linux/sched.h>
10 #include <linux/init.h>
11 #include <linux/kgdb.h>
12 #include <linux/smp.h>
13 #include <linux/io.h>
15 #include <asm/stackprotector.h>
16 #include <asm/perf_event.h>
17 #include <asm/mmu_context.h>
18 #include <asm/hypervisor.h>
19 #include <asm/processor.h>
20 #include <asm/sections.h>
21 #include <linux/topology.h>
22 #include <linux/cpumask.h>
23 #include <asm/pgtable.h>
24 #include <asm/atomic.h>
25 #include <asm/proto.h>
26 #include <asm/setup.h>
27 #include <asm/apic.h>
28 #include <asm/desc.h>
29 #include <asm/i387.h>
30 #include <asm/mtrr.h>
31 #include <linux/numa.h>
32 #include <asm/asm.h>
33 #include <asm/cpu.h>
34 #include <asm/mce.h>
35 #include <asm/msr.h>
36 #include <asm/pat.h>
38 #ifdef CONFIG_X86_LOCAL_APIC
39 #include <asm/uv/uv.h>
40 #endif
42 #include "cpu.h"
44 /* all of these masks are initialized in setup_cpu_local_masks() */
45 cpumask_var_t cpu_initialized_mask;
46 cpumask_var_t cpu_callout_mask;
47 cpumask_var_t cpu_callin_mask;
49 /* representing cpus for which sibling maps can be computed */
50 cpumask_var_t cpu_sibling_setup_mask;
52 /* correctly size the local cpu masks */
53 void __init setup_cpu_local_masks(void)
55 alloc_bootmem_cpumask_var(&cpu_initialized_mask);
56 alloc_bootmem_cpumask_var(&cpu_callin_mask);
57 alloc_bootmem_cpumask_var(&cpu_callout_mask);
58 alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask);
61 static void __cpuinit default_init(struct cpuinfo_x86 *c)
63 #ifdef CONFIG_X86_64
64 cpu_detect_cache_sizes(c);
65 #else
66 /* Not much we can do here... */
67 /* Check if at least it has cpuid */
68 if (c->cpuid_level == -1) {
69 /* No cpuid. It must be an ancient CPU */
70 if (c->x86 == 4)
71 strcpy(c->x86_model_id, "486");
72 else if (c->x86 == 3)
73 strcpy(c->x86_model_id, "386");
75 #endif
78 static const struct cpu_dev __cpuinitconst default_cpu = {
79 .c_init = default_init,
80 .c_vendor = "Unknown",
81 .c_x86_vendor = X86_VENDOR_UNKNOWN,
84 static const struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
86 DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
87 #ifdef CONFIG_X86_64
89 * We need valid kernel segments for data and code in long mode too
90 * IRET will check the segment types kkeil 2000/10/28
91 * Also sysret mandates a special GDT layout
93 * TLS descriptors are currently at a different place compared to i386.
94 * Hopefully nobody expects them at a fixed place (Wine?)
96 [GDT_ENTRY_KERNEL32_CS] = GDT_ENTRY_INIT(0xc09b, 0, 0xfffff),
97 [GDT_ENTRY_KERNEL_CS] = GDT_ENTRY_INIT(0xa09b, 0, 0xfffff),
98 [GDT_ENTRY_KERNEL_DS] = GDT_ENTRY_INIT(0xc093, 0, 0xfffff),
99 [GDT_ENTRY_DEFAULT_USER32_CS] = GDT_ENTRY_INIT(0xc0fb, 0, 0xfffff),
100 [GDT_ENTRY_DEFAULT_USER_DS] = GDT_ENTRY_INIT(0xc0f3, 0, 0xfffff),
101 [GDT_ENTRY_DEFAULT_USER_CS] = GDT_ENTRY_INIT(0xa0fb, 0, 0xfffff),
102 #else
103 [GDT_ENTRY_KERNEL_CS] = GDT_ENTRY_INIT(0xc09a, 0, 0xfffff),
104 [GDT_ENTRY_KERNEL_DS] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
105 [GDT_ENTRY_DEFAULT_USER_CS] = GDT_ENTRY_INIT(0xc0fa, 0, 0xfffff),
106 [GDT_ENTRY_DEFAULT_USER_DS] = GDT_ENTRY_INIT(0xc0f2, 0, 0xfffff),
108 * Segments used for calling PnP BIOS have byte granularity.
109 * They code segments and data segments have fixed 64k limits,
110 * the transfer segment sizes are set at run time.
112 /* 32-bit code */
113 [GDT_ENTRY_PNPBIOS_CS32] = GDT_ENTRY_INIT(0x409a, 0, 0xffff),
114 /* 16-bit code */
115 [GDT_ENTRY_PNPBIOS_CS16] = GDT_ENTRY_INIT(0x009a, 0, 0xffff),
116 /* 16-bit data */
117 [GDT_ENTRY_PNPBIOS_DS] = GDT_ENTRY_INIT(0x0092, 0, 0xffff),
118 /* 16-bit data */
119 [GDT_ENTRY_PNPBIOS_TS1] = GDT_ENTRY_INIT(0x0092, 0, 0),
120 /* 16-bit data */
121 [GDT_ENTRY_PNPBIOS_TS2] = GDT_ENTRY_INIT(0x0092, 0, 0),
123 * The APM segments have byte granularity and their bases
124 * are set at run time. All have 64k limits.
126 /* 32-bit code */
127 [GDT_ENTRY_APMBIOS_BASE] = GDT_ENTRY_INIT(0x409a, 0, 0xffff),
128 /* 16-bit code */
129 [GDT_ENTRY_APMBIOS_BASE+1] = GDT_ENTRY_INIT(0x009a, 0, 0xffff),
130 /* data */
131 [GDT_ENTRY_APMBIOS_BASE+2] = GDT_ENTRY_INIT(0x4092, 0, 0xffff),
133 [GDT_ENTRY_ESPFIX_SS] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
134 [GDT_ENTRY_PERCPU] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
135 GDT_STACK_CANARY_INIT
136 #endif
137 } };
138 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
140 static int __init x86_xsave_setup(char *s)
142 setup_clear_cpu_cap(X86_FEATURE_XSAVE);
143 setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
144 return 1;
146 __setup("noxsave", x86_xsave_setup);
148 static int __init x86_xsaveopt_setup(char *s)
150 setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
151 return 1;
153 __setup("noxsaveopt", x86_xsaveopt_setup);
155 #ifdef CONFIG_X86_32
156 static int cachesize_override __cpuinitdata = -1;
157 static int disable_x86_serial_nr __cpuinitdata = 1;
159 static int __init cachesize_setup(char *str)
161 get_option(&str, &cachesize_override);
162 return 1;
164 __setup("cachesize=", cachesize_setup);
166 static int __init x86_fxsr_setup(char *s)
168 setup_clear_cpu_cap(X86_FEATURE_FXSR);
169 setup_clear_cpu_cap(X86_FEATURE_XMM);
170 return 1;
172 __setup("nofxsr", x86_fxsr_setup);
174 static int __init x86_sep_setup(char *s)
176 setup_clear_cpu_cap(X86_FEATURE_SEP);
177 return 1;
179 __setup("nosep", x86_sep_setup);
181 /* Standard macro to see if a specific flag is changeable */
182 static inline int flag_is_changeable_p(u32 flag)
184 u32 f1, f2;
187 * Cyrix and IDT cpus allow disabling of CPUID
188 * so the code below may return different results
189 * when it is executed before and after enabling
190 * the CPUID. Add "volatile" to not allow gcc to
191 * optimize the subsequent calls to this function.
193 asm volatile ("pushfl \n\t"
194 "pushfl \n\t"
195 "popl %0 \n\t"
196 "movl %0, %1 \n\t"
197 "xorl %2, %0 \n\t"
198 "pushl %0 \n\t"
199 "popfl \n\t"
200 "pushfl \n\t"
201 "popl %0 \n\t"
202 "popfl \n\t"
204 : "=&r" (f1), "=&r" (f2)
205 : "ir" (flag));
207 return ((f1^f2) & flag) != 0;
210 /* Probe for the CPUID instruction */
211 static int __cpuinit have_cpuid_p(void)
213 return flag_is_changeable_p(X86_EFLAGS_ID);
216 static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
218 unsigned long lo, hi;
220 if (!cpu_has(c, X86_FEATURE_PN) || !disable_x86_serial_nr)
221 return;
223 /* Disable processor serial number: */
225 rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
226 lo |= 0x200000;
227 wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
229 printk(KERN_NOTICE "CPU serial number disabled.\n");
230 clear_cpu_cap(c, X86_FEATURE_PN);
232 /* Disabling the serial number may affect the cpuid level */
233 c->cpuid_level = cpuid_eax(0);
236 static int __init x86_serial_nr_setup(char *s)
238 disable_x86_serial_nr = 0;
239 return 1;
241 __setup("serialnumber", x86_serial_nr_setup);
242 #else
243 static inline int flag_is_changeable_p(u32 flag)
245 return 1;
247 /* Probe for the CPUID instruction */
248 static inline int have_cpuid_p(void)
250 return 1;
252 static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
255 #endif
257 static int disable_smep __cpuinitdata;
258 static __init int setup_disable_smep(char *arg)
260 disable_smep = 1;
261 return 1;
263 __setup("nosmep", setup_disable_smep);
265 static __cpuinit void setup_smep(struct cpuinfo_x86 *c)
267 if (cpu_has(c, X86_FEATURE_SMEP)) {
268 if (unlikely(disable_smep)) {
269 setup_clear_cpu_cap(X86_FEATURE_SMEP);
270 clear_in_cr4(X86_CR4_SMEP);
271 } else
272 set_in_cr4(X86_CR4_SMEP);
277 * Some CPU features depend on higher CPUID levels, which may not always
278 * be available due to CPUID level capping or broken virtualization
279 * software. Add those features to this table to auto-disable them.
281 struct cpuid_dependent_feature {
282 u32 feature;
283 u32 level;
286 static const struct cpuid_dependent_feature __cpuinitconst
287 cpuid_dependent_features[] = {
288 { X86_FEATURE_MWAIT, 0x00000005 },
289 { X86_FEATURE_DCA, 0x00000009 },
290 { X86_FEATURE_XSAVE, 0x0000000d },
291 { 0, 0 }
294 static void __cpuinit filter_cpuid_features(struct cpuinfo_x86 *c, bool warn)
296 const struct cpuid_dependent_feature *df;
298 for (df = cpuid_dependent_features; df->feature; df++) {
300 if (!cpu_has(c, df->feature))
301 continue;
303 * Note: cpuid_level is set to -1 if unavailable, but
304 * extended_extended_level is set to 0 if unavailable
305 * and the legitimate extended levels are all negative
306 * when signed; hence the weird messing around with
307 * signs here...
309 if (!((s32)df->level < 0 ?
310 (u32)df->level > (u32)c->extended_cpuid_level :
311 (s32)df->level > (s32)c->cpuid_level))
312 continue;
314 clear_cpu_cap(c, df->feature);
315 if (!warn)
316 continue;
318 printk(KERN_WARNING
319 "CPU: CPU feature %s disabled, no CPUID level 0x%x\n",
320 x86_cap_flags[df->feature], df->level);
325 * Naming convention should be: <Name> [(<Codename>)]
326 * This table only is used unless init_<vendor>() below doesn't set it;
327 * in particular, if CPUID levels 0x80000002..4 are supported, this
328 * isn't used
331 /* Look up CPU names by table lookup. */
332 static const char *__cpuinit table_lookup_model(struct cpuinfo_x86 *c)
334 const struct cpu_model_info *info;
336 if (c->x86_model >= 16)
337 return NULL; /* Range check */
339 if (!this_cpu)
340 return NULL;
342 info = this_cpu->c_models;
344 while (info && info->family) {
345 if (info->family == c->x86)
346 return info->model_names[c->x86_model];
347 info++;
349 return NULL; /* Not found */
352 __u32 cpu_caps_cleared[NCAPINTS] __cpuinitdata;
353 __u32 cpu_caps_set[NCAPINTS] __cpuinitdata;
355 void load_percpu_segment(int cpu)
357 #ifdef CONFIG_X86_32
358 loadsegment(fs, __KERNEL_PERCPU);
359 #else
360 loadsegment(gs, 0);
361 wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu));
362 #endif
363 load_stack_canary_segment();
367 * Current gdt points %fs at the "master" per-cpu area: after this,
368 * it's on the real one.
370 void switch_to_new_gdt(int cpu)
372 struct desc_ptr gdt_descr;
374 gdt_descr.address = (long)get_cpu_gdt_table(cpu);
375 gdt_descr.size = GDT_SIZE - 1;
376 load_gdt(&gdt_descr);
377 /* Reload the per-cpu base */
379 load_percpu_segment(cpu);
382 static const struct cpu_dev *__cpuinitdata cpu_devs[X86_VENDOR_NUM] = {};
384 static void __cpuinit get_model_name(struct cpuinfo_x86 *c)
386 unsigned int *v;
387 char *p, *q;
389 if (c->extended_cpuid_level < 0x80000004)
390 return;
392 v = (unsigned int *)c->x86_model_id;
393 cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
394 cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
395 cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
396 c->x86_model_id[48] = 0;
399 * Intel chips right-justify this string for some dumb reason;
400 * undo that brain damage:
402 p = q = &c->x86_model_id[0];
403 while (*p == ' ')
404 p++;
405 if (p != q) {
406 while (*p)
407 *q++ = *p++;
408 while (q <= &c->x86_model_id[48])
409 *q++ = '\0'; /* Zero-pad the rest */
413 void __cpuinit cpu_detect_cache_sizes(struct cpuinfo_x86 *c)
415 unsigned int n, dummy, ebx, ecx, edx, l2size;
417 n = c->extended_cpuid_level;
419 if (n >= 0x80000005) {
420 cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
421 c->x86_cache_size = (ecx>>24) + (edx>>24);
422 #ifdef CONFIG_X86_64
423 /* On K8 L1 TLB is inclusive, so don't count it */
424 c->x86_tlbsize = 0;
425 #endif
428 if (n < 0x80000006) /* Some chips just has a large L1. */
429 return;
431 cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
432 l2size = ecx >> 16;
434 #ifdef CONFIG_X86_64
435 c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
436 #else
437 /* do processor-specific cache resizing */
438 if (this_cpu->c_size_cache)
439 l2size = this_cpu->c_size_cache(c, l2size);
441 /* Allow user to override all this if necessary. */
442 if (cachesize_override != -1)
443 l2size = cachesize_override;
445 if (l2size == 0)
446 return; /* Again, no L2 cache is possible */
447 #endif
449 c->x86_cache_size = l2size;
452 void __cpuinit detect_ht(struct cpuinfo_x86 *c)
454 #ifdef CONFIG_X86_HT
455 u32 eax, ebx, ecx, edx;
456 int index_msb, core_bits;
457 static bool printed;
459 if (!cpu_has(c, X86_FEATURE_HT))
460 return;
462 if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
463 goto out;
465 if (cpu_has(c, X86_FEATURE_XTOPOLOGY))
466 return;
468 cpuid(1, &eax, &ebx, &ecx, &edx);
470 smp_num_siblings = (ebx & 0xff0000) >> 16;
472 if (smp_num_siblings == 1) {
473 printk_once(KERN_INFO "CPU0: Hyper-Threading is disabled\n");
474 goto out;
477 if (smp_num_siblings <= 1)
478 goto out;
480 if (smp_num_siblings > nr_cpu_ids) {
481 pr_warning("CPU: Unsupported number of siblings %d",
482 smp_num_siblings);
483 smp_num_siblings = 1;
484 return;
487 index_msb = get_count_order(smp_num_siblings);
488 c->phys_proc_id = apic->phys_pkg_id(c->initial_apicid, index_msb);
490 smp_num_siblings = smp_num_siblings / c->x86_max_cores;
492 index_msb = get_count_order(smp_num_siblings);
494 core_bits = get_count_order(c->x86_max_cores);
496 c->cpu_core_id = apic->phys_pkg_id(c->initial_apicid, index_msb) &
497 ((1 << core_bits) - 1);
499 out:
500 if (!printed && (c->x86_max_cores * smp_num_siblings) > 1) {
501 printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
502 c->phys_proc_id);
503 printk(KERN_INFO "CPU: Processor Core ID: %d\n",
504 c->cpu_core_id);
505 printed = 1;
507 #endif
510 static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
512 char *v = c->x86_vendor_id;
513 int i;
515 for (i = 0; i < X86_VENDOR_NUM; i++) {
516 if (!cpu_devs[i])
517 break;
519 if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
520 (cpu_devs[i]->c_ident[1] &&
521 !strcmp(v, cpu_devs[i]->c_ident[1]))) {
523 this_cpu = cpu_devs[i];
524 c->x86_vendor = this_cpu->c_x86_vendor;
525 return;
529 printk_once(KERN_ERR
530 "CPU: vendor_id '%s' unknown, using generic init.\n" \
531 "CPU: Your system may be unstable.\n", v);
533 c->x86_vendor = X86_VENDOR_UNKNOWN;
534 this_cpu = &default_cpu;
537 void __cpuinit cpu_detect(struct cpuinfo_x86 *c)
539 /* Get vendor name */
540 cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
541 (unsigned int *)&c->x86_vendor_id[0],
542 (unsigned int *)&c->x86_vendor_id[8],
543 (unsigned int *)&c->x86_vendor_id[4]);
545 c->x86 = 4;
546 /* Intel-defined flags: level 0x00000001 */
547 if (c->cpuid_level >= 0x00000001) {
548 u32 junk, tfms, cap0, misc;
550 cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
551 c->x86 = (tfms >> 8) & 0xf;
552 c->x86_model = (tfms >> 4) & 0xf;
553 c->x86_mask = tfms & 0xf;
555 if (c->x86 == 0xf)
556 c->x86 += (tfms >> 20) & 0xff;
557 if (c->x86 >= 0x6)
558 c->x86_model += ((tfms >> 16) & 0xf) << 4;
560 if (cap0 & (1<<19)) {
561 c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
562 c->x86_cache_alignment = c->x86_clflush_size;
567 void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
569 u32 tfms, xlvl;
570 u32 ebx;
572 /* Intel-defined flags: level 0x00000001 */
573 if (c->cpuid_level >= 0x00000001) {
574 u32 capability, excap;
576 cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
577 c->x86_capability[0] = capability;
578 c->x86_capability[4] = excap;
581 /* Additional Intel-defined flags: level 0x00000007 */
582 if (c->cpuid_level >= 0x00000007) {
583 u32 eax, ebx, ecx, edx;
585 cpuid_count(0x00000007, 0, &eax, &ebx, &ecx, &edx);
587 c->x86_capability[9] = ebx;
590 /* AMD-defined flags: level 0x80000001 */
591 xlvl = cpuid_eax(0x80000000);
592 c->extended_cpuid_level = xlvl;
594 if ((xlvl & 0xffff0000) == 0x80000000) {
595 if (xlvl >= 0x80000001) {
596 c->x86_capability[1] = cpuid_edx(0x80000001);
597 c->x86_capability[6] = cpuid_ecx(0x80000001);
601 if (c->extended_cpuid_level >= 0x80000008) {
602 u32 eax = cpuid_eax(0x80000008);
604 c->x86_virt_bits = (eax >> 8) & 0xff;
605 c->x86_phys_bits = eax & 0xff;
607 #ifdef CONFIG_X86_32
608 else if (cpu_has(c, X86_FEATURE_PAE) || cpu_has(c, X86_FEATURE_PSE36))
609 c->x86_phys_bits = 36;
610 #endif
612 if (c->extended_cpuid_level >= 0x80000007)
613 c->x86_power = cpuid_edx(0x80000007);
615 init_scattered_cpuid_features(c);
618 static void __cpuinit identify_cpu_without_cpuid(struct cpuinfo_x86 *c)
620 #ifdef CONFIG_X86_32
621 int i;
624 * First of all, decide if this is a 486 or higher
625 * It's a 486 if we can modify the AC flag
627 if (flag_is_changeable_p(X86_EFLAGS_AC))
628 c->x86 = 4;
629 else
630 c->x86 = 3;
632 for (i = 0; i < X86_VENDOR_NUM; i++)
633 if (cpu_devs[i] && cpu_devs[i]->c_identify) {
634 c->x86_vendor_id[0] = 0;
635 cpu_devs[i]->c_identify(c);
636 if (c->x86_vendor_id[0]) {
637 get_cpu_vendor(c);
638 break;
641 #endif
645 * Do minimum CPU detection early.
646 * Fields really needed: vendor, cpuid_level, family, model, mask,
647 * cache alignment.
648 * The others are not touched to avoid unwanted side effects.
650 * WARNING: this function is only called on the BP. Don't add code here
651 * that is supposed to run on all CPUs.
653 static void __init early_identify_cpu(struct cpuinfo_x86 *c)
655 #ifdef CONFIG_X86_64
656 c->x86_clflush_size = 64;
657 c->x86_phys_bits = 36;
658 c->x86_virt_bits = 48;
659 #else
660 c->x86_clflush_size = 32;
661 c->x86_phys_bits = 32;
662 c->x86_virt_bits = 32;
663 #endif
664 c->x86_cache_alignment = c->x86_clflush_size;
666 memset(&c->x86_capability, 0, sizeof c->x86_capability);
667 c->extended_cpuid_level = 0;
669 if (!have_cpuid_p())
670 identify_cpu_without_cpuid(c);
672 /* cyrix could have cpuid enabled via c_identify()*/
673 if (!have_cpuid_p())
674 return;
676 cpu_detect(c);
678 get_cpu_vendor(c);
680 get_cpu_cap(c);
682 if (this_cpu->c_early_init)
683 this_cpu->c_early_init(c);
685 #ifdef CONFIG_SMP
686 c->cpu_index = 0;
687 #endif
688 filter_cpuid_features(c, false);
690 setup_smep(c);
693 void __init early_cpu_init(void)
695 const struct cpu_dev *const *cdev;
696 int count = 0;
698 #ifdef CONFIG_PROCESSOR_SELECT
699 printk(KERN_INFO "KERNEL supported cpus:\n");
700 #endif
702 for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) {
703 const struct cpu_dev *cpudev = *cdev;
705 if (count >= X86_VENDOR_NUM)
706 break;
707 cpu_devs[count] = cpudev;
708 count++;
710 #ifdef CONFIG_PROCESSOR_SELECT
712 unsigned int j;
714 for (j = 0; j < 2; j++) {
715 if (!cpudev->c_ident[j])
716 continue;
717 printk(KERN_INFO " %s %s\n", cpudev->c_vendor,
718 cpudev->c_ident[j]);
721 #endif
723 early_identify_cpu(&boot_cpu_data);
727 * The NOPL instruction is supposed to exist on all CPUs of family >= 6;
728 * unfortunately, that's not true in practice because of early VIA
729 * chips and (more importantly) broken virtualizers that are not easy
730 * to detect. In the latter case it doesn't even *fail* reliably, so
731 * probing for it doesn't even work. Disable it completely on 32-bit
732 * unless we can find a reliable way to detect all the broken cases.
733 * Enable it explicitly on 64-bit for non-constant inputs of cpu_has().
735 static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
737 #ifdef CONFIG_X86_32
738 clear_cpu_cap(c, X86_FEATURE_NOPL);
739 #else
740 set_cpu_cap(c, X86_FEATURE_NOPL);
741 #endif
744 static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
746 c->extended_cpuid_level = 0;
748 if (!have_cpuid_p())
749 identify_cpu_without_cpuid(c);
751 /* cyrix could have cpuid enabled via c_identify()*/
752 if (!have_cpuid_p())
753 return;
755 cpu_detect(c);
757 get_cpu_vendor(c);
759 get_cpu_cap(c);
761 if (c->cpuid_level >= 0x00000001) {
762 c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF;
763 #ifdef CONFIG_X86_32
764 # ifdef CONFIG_X86_HT
765 c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
766 # else
767 c->apicid = c->initial_apicid;
768 # endif
769 #endif
771 #ifdef CONFIG_X86_HT
772 c->phys_proc_id = c->initial_apicid;
773 #endif
776 setup_smep(c);
778 get_model_name(c); /* Default name */
780 detect_nopl(c);
784 * This does the hard work of actually picking apart the CPU stuff...
786 static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
788 int i;
790 c->loops_per_jiffy = loops_per_jiffy;
791 c->x86_cache_size = -1;
792 c->x86_vendor = X86_VENDOR_UNKNOWN;
793 c->x86_model = c->x86_mask = 0; /* So far unknown... */
794 c->x86_vendor_id[0] = '\0'; /* Unset */
795 c->x86_model_id[0] = '\0'; /* Unset */
796 c->x86_max_cores = 1;
797 c->x86_coreid_bits = 0;
798 #ifdef CONFIG_X86_64
799 c->x86_clflush_size = 64;
800 c->x86_phys_bits = 36;
801 c->x86_virt_bits = 48;
802 #else
803 c->cpuid_level = -1; /* CPUID not detected */
804 c->x86_clflush_size = 32;
805 c->x86_phys_bits = 32;
806 c->x86_virt_bits = 32;
807 #endif
808 c->x86_cache_alignment = c->x86_clflush_size;
809 memset(&c->x86_capability, 0, sizeof c->x86_capability);
811 generic_identify(c);
813 if (this_cpu->c_identify)
814 this_cpu->c_identify(c);
816 /* Clear/Set all flags overriden by options, after probe */
817 for (i = 0; i < NCAPINTS; i++) {
818 c->x86_capability[i] &= ~cpu_caps_cleared[i];
819 c->x86_capability[i] |= cpu_caps_set[i];
822 #ifdef CONFIG_X86_64
823 c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
824 #endif
827 * Vendor-specific initialization. In this section we
828 * canonicalize the feature flags, meaning if there are
829 * features a certain CPU supports which CPUID doesn't
830 * tell us, CPUID claiming incorrect flags, or other bugs,
831 * we handle them here.
833 * At the end of this section, c->x86_capability better
834 * indicate the features this CPU genuinely supports!
836 if (this_cpu->c_init)
837 this_cpu->c_init(c);
839 /* Disable the PN if appropriate */
840 squash_the_stupid_serial_number(c);
843 * The vendor-specific functions might have changed features.
844 * Now we do "generic changes."
847 /* Filter out anything that depends on CPUID levels we don't have */
848 filter_cpuid_features(c, true);
850 /* If the model name is still unset, do table lookup. */
851 if (!c->x86_model_id[0]) {
852 const char *p;
853 p = table_lookup_model(c);
854 if (p)
855 strcpy(c->x86_model_id, p);
856 else
857 /* Last resort... */
858 sprintf(c->x86_model_id, "%02x/%02x",
859 c->x86, c->x86_model);
862 #ifdef CONFIG_X86_64
863 detect_ht(c);
864 #endif
866 init_hypervisor(c);
869 * Clear/Set all flags overriden by options, need do it
870 * before following smp all cpus cap AND.
872 for (i = 0; i < NCAPINTS; i++) {
873 c->x86_capability[i] &= ~cpu_caps_cleared[i];
874 c->x86_capability[i] |= cpu_caps_set[i];
878 * On SMP, boot_cpu_data holds the common feature set between
879 * all CPUs; so make sure that we indicate which features are
880 * common between the CPUs. The first time this routine gets
881 * executed, c == &boot_cpu_data.
883 if (c != &boot_cpu_data) {
884 /* AND the already accumulated flags with these */
885 for (i = 0; i < NCAPINTS; i++)
886 boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
889 /* Init Machine Check Exception if available. */
890 mcheck_cpu_init(c);
892 select_idle_routine(c);
894 #ifdef CONFIG_NUMA
895 numa_add_cpu(smp_processor_id());
896 #endif
899 #ifdef CONFIG_X86_64
900 static void vgetcpu_set_mode(void)
902 if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP))
903 vgetcpu_mode = VGETCPU_RDTSCP;
904 else
905 vgetcpu_mode = VGETCPU_LSL;
907 #endif
909 void __init identify_boot_cpu(void)
911 identify_cpu(&boot_cpu_data);
912 init_c1e_mask();
913 #ifdef CONFIG_X86_32
914 sysenter_setup();
915 enable_sep_cpu();
916 #else
917 vgetcpu_set_mode();
918 #endif
921 void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
923 BUG_ON(c == &boot_cpu_data);
924 identify_cpu(c);
925 #ifdef CONFIG_X86_32
926 enable_sep_cpu();
927 #endif
928 mtrr_ap_init();
931 struct msr_range {
932 unsigned min;
933 unsigned max;
936 static const struct msr_range msr_range_array[] __cpuinitconst = {
937 { 0x00000000, 0x00000418},
938 { 0xc0000000, 0xc000040b},
939 { 0xc0010000, 0xc0010142},
940 { 0xc0011000, 0xc001103b},
943 static void __cpuinit print_cpu_msr(void)
945 unsigned index_min, index_max;
946 unsigned index;
947 u64 val;
948 int i;
950 for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) {
951 index_min = msr_range_array[i].min;
952 index_max = msr_range_array[i].max;
954 for (index = index_min; index < index_max; index++) {
955 if (rdmsrl_amd_safe(index, &val))
956 continue;
957 printk(KERN_INFO " MSR%08x: %016llx\n", index, val);
962 static int show_msr __cpuinitdata;
964 static __init int setup_show_msr(char *arg)
966 int num;
968 get_option(&arg, &num);
970 if (num > 0)
971 show_msr = num;
972 return 1;
974 __setup("show_msr=", setup_show_msr);
976 static __init int setup_noclflush(char *arg)
978 setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
979 return 1;
981 __setup("noclflush", setup_noclflush);
983 void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
985 const char *vendor = NULL;
987 if (c->x86_vendor < X86_VENDOR_NUM) {
988 vendor = this_cpu->c_vendor;
989 } else {
990 if (c->cpuid_level >= 0)
991 vendor = c->x86_vendor_id;
994 if (vendor && !strstr(c->x86_model_id, vendor))
995 printk(KERN_CONT "%s ", vendor);
997 if (c->x86_model_id[0])
998 printk(KERN_CONT "%s", c->x86_model_id);
999 else
1000 printk(KERN_CONT "%d86", c->x86);
1002 if (c->x86_mask || c->cpuid_level >= 0)
1003 printk(KERN_CONT " stepping %02x\n", c->x86_mask);
1004 else
1005 printk(KERN_CONT "\n");
1007 #ifdef CONFIG_SMP
1008 if (c->cpu_index < show_msr)
1009 print_cpu_msr();
1010 #else
1011 if (show_msr)
1012 print_cpu_msr();
1013 #endif
1016 static __init int setup_disablecpuid(char *arg)
1018 int bit;
1020 if (get_option(&arg, &bit) && bit < NCAPINTS*32)
1021 setup_clear_cpu_cap(bit);
1022 else
1023 return 0;
1025 return 1;
1027 __setup("clearcpuid=", setup_disablecpuid);
1029 #ifdef CONFIG_X86_64
1030 struct desc_ptr idt_descr = { NR_VECTORS * 16 - 1, (unsigned long) idt_table };
1032 DEFINE_PER_CPU_FIRST(union irq_stack_union,
1033 irq_stack_union) __aligned(PAGE_SIZE);
1036 * The following four percpu variables are hot. Align current_task to
1037 * cacheline size such that all four fall in the same cacheline.
1039 DEFINE_PER_CPU(struct task_struct *, current_task) ____cacheline_aligned =
1040 &init_task;
1041 EXPORT_PER_CPU_SYMBOL(current_task);
1043 DEFINE_PER_CPU(unsigned long, kernel_stack) =
1044 (unsigned long)&init_thread_union - KERNEL_STACK_OFFSET + THREAD_SIZE;
1045 EXPORT_PER_CPU_SYMBOL(kernel_stack);
1047 DEFINE_PER_CPU(char *, irq_stack_ptr) =
1048 init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
1050 DEFINE_PER_CPU(unsigned int, irq_count) = -1;
1053 * Special IST stacks which the CPU switches to when it calls
1054 * an IST-marked descriptor entry. Up to 7 stacks (hardware
1055 * limit), all of them are 4K, except the debug stack which
1056 * is 8K.
1058 static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
1059 [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STKSZ,
1060 [DEBUG_STACK - 1] = DEBUG_STKSZ
1063 static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
1064 [(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
1066 /* May not be marked __init: used by software suspend */
1067 void syscall_init(void)
1070 * LSTAR and STAR live in a bit strange symbiosis.
1071 * They both write to the same internal register. STAR allows to
1072 * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
1074 wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32);
1075 wrmsrl(MSR_LSTAR, system_call);
1076 wrmsrl(MSR_CSTAR, ignore_sysret);
1078 #ifdef CONFIG_IA32_EMULATION
1079 syscall32_cpu_init();
1080 #endif
1082 /* Flags to clear on syscall */
1083 wrmsrl(MSR_SYSCALL_MASK,
1084 X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
1087 unsigned long kernel_eflags;
1090 * Copies of the original ist values from the tss are only accessed during
1091 * debugging, no special alignment required.
1093 DEFINE_PER_CPU(struct orig_ist, orig_ist);
1095 #else /* CONFIG_X86_64 */
1097 DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
1098 EXPORT_PER_CPU_SYMBOL(current_task);
1100 #ifdef CONFIG_CC_STACKPROTECTOR
1101 DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
1102 #endif
1104 /* Make sure %fs and %gs are initialized properly in idle threads */
1105 struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs)
1107 memset(regs, 0, sizeof(struct pt_regs));
1108 regs->fs = __KERNEL_PERCPU;
1109 regs->gs = __KERNEL_STACK_CANARY;
1111 return regs;
1113 #endif /* CONFIG_X86_64 */
1116 * Clear all 6 debug registers:
1118 static void clear_all_debug_regs(void)
1120 int i;
1122 for (i = 0; i < 8; i++) {
1123 /* Ignore db4, db5 */
1124 if ((i == 4) || (i == 5))
1125 continue;
1127 set_debugreg(0, i);
1131 #ifdef CONFIG_KGDB
1133 * Restore debug regs if using kgdbwait and you have a kernel debugger
1134 * connection established.
1136 static void dbg_restore_debug_regs(void)
1138 if (unlikely(kgdb_connected && arch_kgdb_ops.correct_hw_break))
1139 arch_kgdb_ops.correct_hw_break();
1141 #else /* ! CONFIG_KGDB */
1142 #define dbg_restore_debug_regs()
1143 #endif /* ! CONFIG_KGDB */
1146 * cpu_init() initializes state that is per-CPU. Some data is already
1147 * initialized (naturally) in the bootstrap process, such as the GDT
1148 * and IDT. We reload them nevertheless, this function acts as a
1149 * 'CPU state barrier', nothing should get across.
1150 * A lot of state is already set up in PDA init for 64 bit
1152 #ifdef CONFIG_X86_64
1154 void __cpuinit cpu_init(void)
1156 struct orig_ist *oist;
1157 struct task_struct *me;
1158 struct tss_struct *t;
1159 unsigned long v;
1160 int cpu;
1161 int i;
1163 cpu = stack_smp_processor_id();
1164 t = &per_cpu(init_tss, cpu);
1165 oist = &per_cpu(orig_ist, cpu);
1167 #ifdef CONFIG_NUMA
1168 if (cpu != 0 && percpu_read(numa_node) == 0 &&
1169 early_cpu_to_node(cpu) != NUMA_NO_NODE)
1170 set_numa_node(early_cpu_to_node(cpu));
1171 #endif
1173 me = current;
1175 if (cpumask_test_and_set_cpu(cpu, cpu_initialized_mask))
1176 panic("CPU#%d already initialized!\n", cpu);
1178 pr_debug("Initializing CPU#%d\n", cpu);
1180 clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
1183 * Initialize the per-CPU GDT with the boot GDT,
1184 * and set up the GDT descriptor:
1187 switch_to_new_gdt(cpu);
1188 loadsegment(fs, 0);
1190 load_idt((const struct desc_ptr *)&idt_descr);
1192 memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
1193 syscall_init();
1195 wrmsrl(MSR_FS_BASE, 0);
1196 wrmsrl(MSR_KERNEL_GS_BASE, 0);
1197 barrier();
1199 x86_configure_nx();
1200 if (cpu != 0)
1201 enable_x2apic();
1204 * set up and load the per-CPU TSS
1206 if (!oist->ist[0]) {
1207 char *estacks = per_cpu(exception_stacks, cpu);
1209 for (v = 0; v < N_EXCEPTION_STACKS; v++) {
1210 estacks += exception_stack_sizes[v];
1211 oist->ist[v] = t->x86_tss.ist[v] =
1212 (unsigned long)estacks;
1216 t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
1219 * <= is required because the CPU will access up to
1220 * 8 bits beyond the end of the IO permission bitmap.
1222 for (i = 0; i <= IO_BITMAP_LONGS; i++)
1223 t->io_bitmap[i] = ~0UL;
1225 atomic_inc(&init_mm.mm_count);
1226 me->active_mm = &init_mm;
1227 BUG_ON(me->mm);
1228 enter_lazy_tlb(&init_mm, me);
1230 load_sp0(t, &current->thread);
1231 set_tss_desc(cpu, t);
1232 load_TR_desc();
1233 load_LDT(&init_mm.context);
1235 clear_all_debug_regs();
1236 dbg_restore_debug_regs();
1238 fpu_init();
1239 xsave_init();
1241 raw_local_save_flags(kernel_eflags);
1243 if (is_uv_system())
1244 uv_cpu_init();
1247 #else
1249 void __cpuinit cpu_init(void)
1251 int cpu = smp_processor_id();
1252 struct task_struct *curr = current;
1253 struct tss_struct *t = &per_cpu(init_tss, cpu);
1254 struct thread_struct *thread = &curr->thread;
1256 if (cpumask_test_and_set_cpu(cpu, cpu_initialized_mask)) {
1257 printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
1258 for (;;)
1259 local_irq_enable();
1262 printk(KERN_INFO "Initializing CPU#%d\n", cpu);
1264 if (cpu_has_vme || cpu_has_tsc || cpu_has_de)
1265 clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
1267 load_idt(&idt_descr);
1268 switch_to_new_gdt(cpu);
1271 * Set up and load the per-CPU TSS and LDT
1273 atomic_inc(&init_mm.mm_count);
1274 curr->active_mm = &init_mm;
1275 BUG_ON(curr->mm);
1276 enter_lazy_tlb(&init_mm, curr);
1278 load_sp0(t, thread);
1279 set_tss_desc(cpu, t);
1280 load_TR_desc();
1281 load_LDT(&init_mm.context);
1283 t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
1285 #ifdef CONFIG_DOUBLEFAULT
1286 /* Set up doublefault TSS pointer in the GDT */
1287 __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
1288 #endif
1290 clear_all_debug_regs();
1291 dbg_restore_debug_regs();
1293 fpu_init();
1294 xsave_init();
1296 #endif