MIPS: perf: Add support for 64-bit perf counters.
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / spi / spi-dw-mid.c
blob130e55537db602749b670464db6806227b98d867
1 /*
2 * Special handling for DW core on Intel MID platform
4 * Copyright (c) 2009, Intel Corporation.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * more details.
15 * You should have received a copy of the GNU General Public License along
16 * with this program; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
20 #include <linux/dma-mapping.h>
21 #include <linux/dmaengine.h>
22 #include <linux/interrupt.h>
23 #include <linux/slab.h>
24 #include <linux/spi/spi.h>
26 #include "spi-dw.h"
28 #ifdef CONFIG_SPI_DW_MID_DMA
29 #include <linux/intel_mid_dma.h>
30 #include <linux/pci.h>
32 struct mid_dma {
33 struct intel_mid_dma_slave dmas_tx;
34 struct intel_mid_dma_slave dmas_rx;
37 static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param)
39 struct dw_spi *dws = param;
41 return dws->dmac && (&dws->dmac->dev == chan->device->dev);
44 static int mid_spi_dma_init(struct dw_spi *dws)
46 struct mid_dma *dw_dma = dws->dma_priv;
47 struct intel_mid_dma_slave *rxs, *txs;
48 dma_cap_mask_t mask;
51 * Get pci device for DMA controller, currently it could only
52 * be the DMA controller of either Moorestown or Medfield
54 dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0813, NULL);
55 if (!dws->dmac)
56 dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL);
58 dma_cap_zero(mask);
59 dma_cap_set(DMA_SLAVE, mask);
61 /* 1. Init rx channel */
62 dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
63 if (!dws->rxchan)
64 goto err_exit;
65 rxs = &dw_dma->dmas_rx;
66 rxs->hs_mode = LNW_DMA_HW_HS;
67 rxs->cfg_mode = LNW_DMA_PER_TO_MEM;
68 dws->rxchan->private = rxs;
70 /* 2. Init tx channel */
71 dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
72 if (!dws->txchan)
73 goto free_rxchan;
74 txs = &dw_dma->dmas_tx;
75 txs->hs_mode = LNW_DMA_HW_HS;
76 txs->cfg_mode = LNW_DMA_MEM_TO_PER;
77 dws->txchan->private = txs;
79 dws->dma_inited = 1;
80 return 0;
82 free_rxchan:
83 dma_release_channel(dws->rxchan);
84 err_exit:
85 return -1;
89 static void mid_spi_dma_exit(struct dw_spi *dws)
91 dma_release_channel(dws->txchan);
92 dma_release_channel(dws->rxchan);
96 * dws->dma_chan_done is cleared before the dma transfer starts,
97 * callback for rx/tx channel will each increment it by 1.
98 * Reaching 2 means the whole spi transaction is done.
100 static void dw_spi_dma_done(void *arg)
102 struct dw_spi *dws = arg;
104 if (++dws->dma_chan_done != 2)
105 return;
106 dw_spi_xfer_done(dws);
109 static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
111 struct dma_async_tx_descriptor *txdesc = NULL, *rxdesc = NULL;
112 struct dma_chan *txchan, *rxchan;
113 struct dma_slave_config txconf, rxconf;
114 u16 dma_ctrl = 0;
116 /* 1. setup DMA related registers */
117 if (cs_change) {
118 spi_enable_chip(dws, 0);
119 dw_writew(dws, dmardlr, 0xf);
120 dw_writew(dws, dmatdlr, 0x10);
121 if (dws->tx_dma)
122 dma_ctrl |= 0x2;
123 if (dws->rx_dma)
124 dma_ctrl |= 0x1;
125 dw_writew(dws, dmacr, dma_ctrl);
126 spi_enable_chip(dws, 1);
129 dws->dma_chan_done = 0;
130 txchan = dws->txchan;
131 rxchan = dws->rxchan;
133 /* 2. Prepare the TX dma transfer */
134 txconf.direction = DMA_TO_DEVICE;
135 txconf.dst_addr = dws->dma_addr;
136 txconf.dst_maxburst = LNW_DMA_MSIZE_16;
137 txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
138 txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
140 txchan->device->device_control(txchan, DMA_SLAVE_CONFIG,
141 (unsigned long) &txconf);
143 memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl));
144 dws->tx_sgl.dma_address = dws->tx_dma;
145 dws->tx_sgl.length = dws->len;
147 txdesc = txchan->device->device_prep_slave_sg(txchan,
148 &dws->tx_sgl,
150 DMA_TO_DEVICE,
151 DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP);
152 txdesc->callback = dw_spi_dma_done;
153 txdesc->callback_param = dws;
155 /* 3. Prepare the RX dma transfer */
156 rxconf.direction = DMA_FROM_DEVICE;
157 rxconf.src_addr = dws->dma_addr;
158 rxconf.src_maxburst = LNW_DMA_MSIZE_16;
159 rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
160 rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
162 rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG,
163 (unsigned long) &rxconf);
165 memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl));
166 dws->rx_sgl.dma_address = dws->rx_dma;
167 dws->rx_sgl.length = dws->len;
169 rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
170 &dws->rx_sgl,
172 DMA_FROM_DEVICE,
173 DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP);
174 rxdesc->callback = dw_spi_dma_done;
175 rxdesc->callback_param = dws;
177 /* rx must be started before tx due to spi instinct */
178 rxdesc->tx_submit(rxdesc);
179 txdesc->tx_submit(txdesc);
180 return 0;
183 static struct dw_spi_dma_ops mid_dma_ops = {
184 .dma_init = mid_spi_dma_init,
185 .dma_exit = mid_spi_dma_exit,
186 .dma_transfer = mid_spi_dma_transfer,
188 #endif
190 /* Some specific info for SPI0 controller on Moorestown */
192 /* HW info for MRST CLk Control Unit, one 32b reg */
193 #define MRST_SPI_CLK_BASE 100000000 /* 100m */
194 #define MRST_CLK_SPI0_REG 0xff11d86c
195 #define CLK_SPI_BDIV_OFFSET 0
196 #define CLK_SPI_BDIV_MASK 0x00000007
197 #define CLK_SPI_CDIV_OFFSET 9
198 #define CLK_SPI_CDIV_MASK 0x00000e00
199 #define CLK_SPI_DISABLE_OFFSET 8
201 int dw_spi_mid_init(struct dw_spi *dws)
203 u32 *clk_reg, clk_cdiv;
205 clk_reg = ioremap_nocache(MRST_CLK_SPI0_REG, 16);
206 if (!clk_reg)
207 return -ENOMEM;
209 /* get SPI controller operating freq info */
210 clk_cdiv = (readl(clk_reg) & CLK_SPI_CDIV_MASK) >> CLK_SPI_CDIV_OFFSET;
211 dws->max_freq = MRST_SPI_CLK_BASE / (clk_cdiv + 1);
212 iounmap(clk_reg);
214 dws->num_cs = 16;
215 dws->fifo_len = 40; /* FIFO has 40 words buffer */
217 #ifdef CONFIG_SPI_DW_MID_DMA
218 dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL);
219 if (!dws->dma_priv)
220 return -ENOMEM;
221 dws->dma_ops = &mid_dma_ops;
222 #endif
223 return 0;