2 * linux/arch/alpha/kernel/sys_nautilus.c
4 * Copyright (C) 1995 David A Rusling
5 * Copyright (C) 1998 Richard Henderson
6 * Copyright (C) 1999 Alpha Processor, Inc.,
7 * (David Daniel, Stig Telfer, Soohoon Lee)
9 * Code supporting NAUTILUS systems.
12 * NAUTILUS has the following I/O features:
14 * a) Driven by AMD 751 aka IRONGATE (northbridge):
18 * b) Driven by ALI M1543C (southbridge)
21 * 1 dual drive capable FDD controller
23 * 1 ECP/EPP/SP parallel port
27 #include <linux/kernel.h>
28 #include <linux/types.h>
30 #include <linux/sched.h>
31 #include <linux/pci.h>
32 #include <linux/init.h>
33 #include <linux/reboot.h>
34 #include <linux/bootmem.h>
35 #include <linux/bitops.h>
37 #include <asm/ptrace.h>
38 #include <asm/system.h>
41 #include <asm/mmu_context.h>
44 #include <asm/pgtable.h>
45 #include <asm/core_irongate.h>
46 #include <asm/hwrpb.h>
47 #include <asm/tlbflush.h>
53 #include "machvec_impl.h"
57 nautilus_init_irq(void)
59 if (alpha_using_srm
) {
60 alpha_mv
.device_interrupt
= srm_device_interrupt
;
64 common_init_isa_dma();
68 nautilus_map_irq(struct pci_dev
*dev
, u8 slot
, u8 pin
)
70 /* Preserve the IRQ set up by the console. */
73 /* UP1500: AGP INTA is actually routed to IRQ 5, not IRQ 10 as
74 console reports. Check the device id of AGP bridge to distinguish
75 UP1500 from UP1000/1100. Note: 'pin' is 2 due to bridge swizzle. */
76 if (slot
== 1 && pin
== 2 &&
77 dev
->bus
->self
&& dev
->bus
->self
->device
== 0x700f)
79 pci_read_config_byte(dev
, PCI_INTERRUPT_LINE
, &irq
);
84 nautilus_kill_arch(int mode
)
86 struct pci_bus
*bus
= pci_isa_hose
->bus
;
91 case LINUX_REBOOT_CMD_RESTART
:
92 if (! alpha_using_srm
) {
94 pci_bus_read_config_byte(bus
, 0x38, 0x43, &t8
);
95 pci_bus_write_config_byte(bus
, 0x38, 0x43, t8
| 0x80);
102 case LINUX_REBOOT_CMD_POWER_OFF
:
104 off
= 0x2000; /* SLP_TYPE = 0, SLP_EN = 1 */
105 pci_bus_read_config_dword(bus
, 0x88, 0x10, &pmuport
);
108 off
= 0x3400; /* SLP_TYPE = 5, SLP_EN = 1 */
109 pci_bus_read_config_dword(bus
, 0x88, 0xe0, &pmuport
);
112 outw(0xffff, pmuport
); /* Clear pending events. */
113 outw(off
, pmuport
+ 4);
119 /* Perform analysis of a machine check that arrived from the system (NMI) */
122 naut_sys_machine_check(unsigned long vector
, unsigned long la_ptr
,
123 struct pt_regs
*regs
)
125 printk("PC %lx RA %lx\n", regs
->pc
, regs
->r26
);
126 irongate_pci_clr_err();
129 /* Machine checks can come from two sources - those on the CPU and those
130 in the system. They are analysed separately but all starts here. */
133 nautilus_machine_check(unsigned long vector
, unsigned long la_ptr
)
137 /* Now for some analysis. Machine checks fall into two classes --
138 those picked up by the system, and those picked up by the CPU.
139 Add to that the two levels of severity - correctable or not. */
141 if (vector
== SCB_Q_SYSMCHK
142 && ((IRONGATE0
->dramms
& 0x300) == 0x300)) {
143 unsigned long nmi_ctl
;
152 /* Write again clears error bits. */
153 IRONGATE0
->stat_cmd
= IRONGATE0
->stat_cmd
& ~0x100;
157 /* Write again clears error bits. */
158 IRONGATE0
->dramms
= IRONGATE0
->dramms
;
168 if (vector
== SCB_Q_SYSERR
)
169 mchk_class
= "Correctable";
170 else if (vector
== SCB_Q_SYSMCHK
)
171 mchk_class
= "Fatal";
173 ev6_machine_check(vector
, la_ptr
);
177 printk(KERN_CRIT
"NAUTILUS Machine check 0x%lx "
178 "[%s System Machine Check (NMI)]\n",
181 naut_sys_machine_check(vector
, la_ptr
, get_irq_regs());
183 /* Tell the PALcode to clear the machine check */
189 extern void free_reserved_mem(void *, void *);
191 static struct resource irongate_mem
= {
192 .name
= "Irongate PCI MEM",
193 .flags
= IORESOURCE_MEM
,
197 nautilus_init_pci(void)
199 struct pci_controller
*hose
= hose_head
;
201 struct pci_dev
*irongate
;
202 unsigned long bus_align
, bus_size
, pci_mem
;
203 unsigned long memtop
= max_low_pfn
<< PAGE_SHIFT
;
205 /* Scan our single hose. */
206 bus
= pci_scan_bus(0, alpha_mv
.pci_ops
, hose
);
209 irongate
= pci_get_bus_and_slot(0, 0);
210 bus
->self
= irongate
;
211 bus
->resource
[1] = &irongate_mem
;
213 pci_bus_size_bridges(bus
);
216 bus
->resource
[0]->start
= 0;
217 bus
->resource
[0]->end
= 0xffff;
219 /* Set up PCI memory range - limit is hardwired to 0xffffffff,
220 base must be at aligned to 16Mb. */
221 bus_align
= bus
->resource
[1]->start
;
222 bus_size
= bus
->resource
[1]->end
+ 1 - bus_align
;
223 if (bus_align
< 0x1000000UL
)
224 bus_align
= 0x1000000UL
;
226 pci_mem
= (0x100000000UL
- bus_size
) & -bus_align
;
228 bus
->resource
[1]->start
= pci_mem
;
229 bus
->resource
[1]->end
= 0xffffffffUL
;
230 if (request_resource(&iomem_resource
, bus
->resource
[1]) < 0)
231 printk(KERN_ERR
"Failed to request MEM on hose 0\n");
233 if (pci_mem
< memtop
)
235 if (memtop
> alpha_mv
.min_mem_address
) {
236 free_reserved_mem(__va(alpha_mv
.min_mem_address
),
238 printk("nautilus_init_pci: %ldk freed\n",
239 (memtop
- alpha_mv
.min_mem_address
) >> 10);
242 if ((IRONGATE0
->dev_vendor
>> 16) > 0x7006) /* Albacore? */
243 IRONGATE0
->pci_mem
= pci_mem
;
245 pci_bus_assign_resources(bus
);
246 pci_fixup_irqs(alpha_mv
.pci_swizzle
, alpha_mv
.pci_map_irq
);
253 struct alpha_machine_vector nautilus_mv __initmv
= {
254 .vector_name
= "Nautilus",
258 .machine_check
= nautilus_machine_check
,
259 .max_isa_dma_address
= ALPHA_MAX_ISA_DMA_ADDRESS
,
260 .min_io_address
= DEFAULT_IO_BASE
,
261 .min_mem_address
= IRONGATE_DEFAULT_MEM_BASE
,
264 .device_interrupt
= isa_device_interrupt
,
266 .init_arch
= irongate_init_arch
,
267 .init_irq
= nautilus_init_irq
,
268 .init_rtc
= common_init_rtc
,
269 .init_pci
= nautilus_init_pci
,
270 .kill_arch
= nautilus_kill_arch
,
271 .pci_map_irq
= nautilus_map_irq
,
272 .pci_swizzle
= common_swizzle
,