arch/arm/vfp/vfpmodule.c

   1 /*
   2  *  linux/arch/arm/vfp/vfpmodule.c
   3  *
   4  *  Copyright (C) 2004 ARM Limited.
   5  *  Written by Deep Blue Solutions Limited.
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11 #include <linux/module.h>
  12 #include <linux/config.h>
  13 #include <linux/types.h>
  14 #include <linux/kernel.h>
  15 #include <linux/signal.h>
  16 #include <linux/sched.h>
  17 #include <linux/init.h>
  18 #include <asm/vfp.h>
  19
  20 #include "vfpinstr.h"
  21 #include "vfp.h"
  22
  23 /*
  24  * Our undef handlers (in entry.S)
  25  */
  26 void vfp_testing_entry(void);
  27 void vfp_support_entry(void);
  28
  29 void (*vfp_vector)(void) = vfp_testing_entry;
  30 union vfp_state *last_VFP_context;
  31
  32 /*
  33  * Dual-use variable.
  34  * Used in startup: set to non-zero if VFP checks fail
  35  * After startup, holds VFP architecture
  36  */
  37 unsigned int VFP_arch;
  38
  39 /*
  40  * Per-thread VFP initialisation.
  41  */
  42 void vfp_flush_thread(union vfp_state *vfp)
  43 {
  44         memset(vfp, 0, sizeof(union vfp_state));
  45
  46         vfp->hard.fpexc = FPEXC_ENABLE;
  47         vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
  48
  49         /*
  50          * Disable VFP to ensure we initialise it first.
  51          */
  52         fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_ENABLE);
  53
  54         /*
  55          * Ensure we don't try to overwrite our newly initialised
  56          * state information on the first fault.
  57          */
  58         if (last_VFP_context == vfp)
  59                 last_VFP_context = NULL;
  60 }
  61
  62 /*
  63  * Per-thread VFP cleanup.
  64  */
  65 void vfp_release_thread(union vfp_state *vfp)
  66 {
  67         if (last_VFP_context == vfp)
  68                 last_VFP_context = NULL;
  69 }
  70
  71 /*
  72  * Raise a SIGFPE for the current process.
  73  * sicode describes the signal being raised.
  74  */
  75 void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
  76 {
  77         siginfo_t info;
  78
  79         memset(&info, 0, sizeof(info));
  80
  81         info.si_signo = SIGFPE;
  82         info.si_code = sicode;
  83         info.si_addr = (void *)(instruction_pointer(regs) - 4);
  84
  85         /*
  86          * This is the same as NWFPE, because it's not clear what
  87          * this is used for
  88          */
  89         current->thread.error_code = 0;
  90         current->thread.trap_no = 6;
  91
  92         send_sig_info(SIGFPE, &info, current);
  93 }
  94
  95 static void vfp_panic(char *reason)
  96 {
  97         int i;
  98
  99         printk(KERN_ERR "VFP: Error: %s\n", reason);
 100         printk(KERN_ERR "VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n",
 101                 fmrx(FPEXC), fmrx(FPSCR), fmrx(FPINST));
 102         for (i = 0; i < 32; i += 2)
 103                 printk(KERN_ERR "VFP: s%2u: 0x%08x s%2u: 0x%08x\n",
 104                        i, vfp_get_float(i), i+1, vfp_get_float(i+1));
 105 }
 106
 107 /*
 108  * Process bitmask of exception conditions.
 109  */
 110 static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_regs *regs)
 111 {
 112         int si_code = 0;
 113
 114         pr_debug("VFP: raising exceptions %08x\n", exceptions);
 115
 116         if (exceptions == (u32)-1) {
 117                 vfp_panic("unhandled bounce");
 118                 vfp_raise_sigfpe(0, regs);
 119                 return;
 120         }
 121
 122         /*
 123          * If any of the status flags are set, update the FPSCR.
 124          * Comparison instructions always return at least one of
 125          * these flags set.
 126          */
 127         if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
 128                 fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
 129
 130         fpscr |= exceptions;
 131
 132         fmxr(FPSCR, fpscr);
 133
 134 #define RAISE(stat,en,sig)                              \
 135         if (exceptions & stat && fpscr & en)            \
 136                 si_code = sig;
 137
 138         /*
 139          * These are arranged in priority order, least to highest.
 140          */
 141         RAISE(FPSCR_IXC, FPSCR_IXE, FPE_FLTRES);
 142         RAISE(FPSCR_UFC, FPSCR_UFE, FPE_FLTUND);
 143         RAISE(FPSCR_OFC, FPSCR_OFE, FPE_FLTOVF);
 144         RAISE(FPSCR_IOC, FPSCR_IOE, FPE_FLTINV);
 145
 146         if (si_code)
 147                 vfp_raise_sigfpe(si_code, regs);
 148 }
 149
 150 /*
 151  * Emulate a VFP instruction.
 152  */
 153 static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs)
 154 {
 155         u32 exceptions = (u32)-1;
 156
 157         pr_debug("VFP: emulate: INST=0x%08x SCR=0x%08x\n", inst, fpscr);
 158
 159         if (INST_CPRTDO(inst)) {
 160                 if (!INST_CPRT(inst)) {
 161                         /*
 162                          * CPDO
 163                          */
 164                         if (vfp_single(inst)) {
 165                                 exceptions = vfp_single_cpdo(inst, fpscr);
 166                         } else {
 167                                 exceptions = vfp_double_cpdo(inst, fpscr);
 168                         }
 169                 } else {
 170                         /*
 171                          * A CPRT instruction can not appear in FPINST2, nor
 172                          * can it cause an exception.  Therefore, we do not
 173                          * have to emulate it.
 174                          */
 175                 }
 176         } else {
 177                 /*
 178                  * A CPDT instruction can not appear in FPINST2, nor can
 179                  * it cause an exception.  Therefore, we do not have to
 180                  * emulate it.
 181                  */
 182         }
 183         return exceptions;
 184 }
 185
 186 /*
 187  * Package up a bounce condition.
 188  */
 189 void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
 190 {
 191         u32 fpscr, orig_fpscr, exceptions, inst;
 192
 193         pr_debug("VFP: bounce: trigger %08x fpexc %08x\n", trigger, fpexc);
 194
 195         /*
 196          * Enable access to the VFP so we can handle the bounce.
 197          */
 198         fmxr(FPEXC, fpexc & ~(FPEXC_EXCEPTION|FPEXC_INV|FPEXC_UFC|FPEXC_IOC));
 199
 200         orig_fpscr = fpscr = fmrx(FPSCR);
 201
 202         /*
 203          * If we are running with inexact exceptions enabled, we need to
 204          * emulate the trigger instruction.  Note that as we're emulating
 205          * the trigger instruction, we need to increment PC.
 206          */
 207         if (fpscr & FPSCR_IXE) {
 208                 regs->ARM_pc += 4;
 209                 goto emulate;
 210         }
 211
 212         barrier();
 213
 214         /*
 215          * Modify fpscr to indicate the number of iterations remaining
 216          */
 217         if (fpexc & FPEXC_EXCEPTION) {
 218                 u32 len;
 219
 220                 len = fpexc + (1 << FPEXC_LENGTH_BIT);
 221
 222                 fpscr &= ~FPSCR_LENGTH_MASK;
 223                 fpscr |= (len & FPEXC_LENGTH_MASK) << (FPSCR_LENGTH_BIT - FPEXC_LENGTH_BIT);
 224         }
 225
 226         /*
 227          * Handle the first FP instruction.  We used to take note of the
 228          * FPEXC bounce reason, but this appears to be unreliable.
 229          * Emulate the bounced instruction instead.
 230          */
 231         inst = fmrx(FPINST);
 232         exceptions = vfp_emulate_instruction(inst, fpscr, regs);
 233         if (exceptions)
 234                 vfp_raise_exceptions(exceptions, inst, orig_fpscr, regs);
 235
 236         /*
 237          * If there isn't a second FP instruction, exit now.
 238          */
 239         if (!(fpexc & FPEXC_FPV2))
 240                 return;
 241
 242         /*
 243          * The barrier() here prevents fpinst2 being read
 244          * before the condition above.
 245          */
 246         barrier();
 247         trigger = fmrx(FPINST2);
 248         fpscr = fmrx(FPSCR);
 249
 250  emulate:
 251         exceptions = vfp_emulate_instruction(trigger, fpscr, regs);
 252         if (exceptions)
 253                 vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
 254 }
 255
 256 /*
 257  * VFP support code initialisation.
 258  */
 259 static int __init vfp_init(void)
 260 {
 261         unsigned int vfpsid;
 262
 263         /*
 264          * First check that there is a VFP that we can use.
 265          * The handler is already setup to just log calls, so
 266          * we just need to read the VFPSID register.
 267          */
 268         vfpsid = fmrx(FPSID);
 269
 270         printk(KERN_INFO "VFP support v0.3: ");
 271         if (VFP_arch) {
 272                 printk("not present\n");
 273         } else if (vfpsid & FPSID_NODOUBLE) {
 274                 printk("no double precision support\n");
 275         } else {
 276                 VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT;  /* Extract the architecture version */
 277                 printk("implementor %02x architecture %d part %02x variant %x rev %x\n",
 278                         (vfpsid & FPSID_IMPLEMENTER_MASK) >> FPSID_IMPLEMENTER_BIT,
 279                         (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT,
 280                         (vfpsid & FPSID_PART_MASK) >> FPSID_PART_BIT,
 281                         (vfpsid & FPSID_VARIANT_MASK) >> FPSID_VARIANT_BIT,
 282                         (vfpsid & FPSID_REV_MASK) >> FPSID_REV_BIT);
 283                 vfp_vector = vfp_support_entry;
 284         }
 285         return 0;
 286 }
 287
 288 late_initcall(vfp_init);