USB: whci-hcd: provide a endpoint_reset method
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / pci / access.c
blob64dd7df90e620a327e2d9f84f72af71cee7eedf3
1 #include <linux/delay.h>
2 #include <linux/pci.h>
3 #include <linux/module.h>
4 #include <linux/sched.h>
5 #include <linux/ioport.h>
6 #include <linux/wait.h>
8 #include "pci.h"
11 * This interrupt-safe spinlock protects all accesses to PCI
12 * configuration space.
15 static DEFINE_SPINLOCK(pci_lock);
18 * Wrappers for all PCI configuration access functions. They just check
19 * alignment, do locking and call the low-level functions pointed to
20 * by pci_dev->ops.
23 #define PCI_byte_BAD 0
24 #define PCI_word_BAD (pos & 1)
25 #define PCI_dword_BAD (pos & 3)
27 #define PCI_OP_READ(size,type,len) \
28 int pci_bus_read_config_##size \
29 (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \
30 { \
31 int res; \
32 unsigned long flags; \
33 u32 data = 0; \
34 if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
35 spin_lock_irqsave(&pci_lock, flags); \
36 res = bus->ops->read(bus, devfn, pos, len, &data); \
37 *value = (type)data; \
38 spin_unlock_irqrestore(&pci_lock, flags); \
39 return res; \
42 #define PCI_OP_WRITE(size,type,len) \
43 int pci_bus_write_config_##size \
44 (struct pci_bus *bus, unsigned int devfn, int pos, type value) \
45 { \
46 int res; \
47 unsigned long flags; \
48 if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
49 spin_lock_irqsave(&pci_lock, flags); \
50 res = bus->ops->write(bus, devfn, pos, len, value); \
51 spin_unlock_irqrestore(&pci_lock, flags); \
52 return res; \
55 PCI_OP_READ(byte, u8, 1)
56 PCI_OP_READ(word, u16, 2)
57 PCI_OP_READ(dword, u32, 4)
58 PCI_OP_WRITE(byte, u8, 1)
59 PCI_OP_WRITE(word, u16, 2)
60 PCI_OP_WRITE(dword, u32, 4)
62 EXPORT_SYMBOL(pci_bus_read_config_byte);
63 EXPORT_SYMBOL(pci_bus_read_config_word);
64 EXPORT_SYMBOL(pci_bus_read_config_dword);
65 EXPORT_SYMBOL(pci_bus_write_config_byte);
66 EXPORT_SYMBOL(pci_bus_write_config_word);
67 EXPORT_SYMBOL(pci_bus_write_config_dword);
70 /**
71 * pci_read_vpd - Read one entry from Vital Product Data
72 * @dev: pci device struct
73 * @pos: offset in vpd space
74 * @count: number of bytes to read
75 * @buf: pointer to where to store result
78 ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf)
80 if (!dev->vpd || !dev->vpd->ops)
81 return -ENODEV;
82 return dev->vpd->ops->read(dev, pos, count, buf);
84 EXPORT_SYMBOL(pci_read_vpd);
86 /**
87 * pci_write_vpd - Write entry to Vital Product Data
88 * @dev: pci device struct
89 * @pos: offset in vpd space
90 * @count: number of bytes to read
91 * @val: value to write
94 ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
96 if (!dev->vpd || !dev->vpd->ops)
97 return -ENODEV;
98 return dev->vpd->ops->write(dev, pos, count, buf);
100 EXPORT_SYMBOL(pci_write_vpd);
103 * The following routines are to prevent the user from accessing PCI config
104 * space when it's unsafe to do so. Some devices require this during BIST and
105 * we're required to prevent it during D-state transitions.
107 * We have a bit per device to indicate it's blocked and a global wait queue
108 * for callers to sleep on until devices are unblocked.
110 static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait);
112 static noinline void pci_wait_ucfg(struct pci_dev *dev)
114 DECLARE_WAITQUEUE(wait, current);
116 __add_wait_queue(&pci_ucfg_wait, &wait);
117 do {
118 set_current_state(TASK_UNINTERRUPTIBLE);
119 spin_unlock_irq(&pci_lock);
120 schedule();
121 spin_lock_irq(&pci_lock);
122 } while (dev->block_ucfg_access);
123 __remove_wait_queue(&pci_ucfg_wait, &wait);
126 #define PCI_USER_READ_CONFIG(size,type) \
127 int pci_user_read_config_##size \
128 (struct pci_dev *dev, int pos, type *val) \
130 int ret = 0; \
131 u32 data = -1; \
132 if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
133 spin_lock_irq(&pci_lock); \
134 if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
135 ret = dev->bus->ops->read(dev->bus, dev->devfn, \
136 pos, sizeof(type), &data); \
137 spin_unlock_irq(&pci_lock); \
138 *val = (type)data; \
139 return ret; \
142 #define PCI_USER_WRITE_CONFIG(size,type) \
143 int pci_user_write_config_##size \
144 (struct pci_dev *dev, int pos, type val) \
146 int ret = -EIO; \
147 if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
148 spin_lock_irq(&pci_lock); \
149 if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
150 ret = dev->bus->ops->write(dev->bus, dev->devfn, \
151 pos, sizeof(type), val); \
152 spin_unlock_irq(&pci_lock); \
153 return ret; \
156 PCI_USER_READ_CONFIG(byte, u8)
157 PCI_USER_READ_CONFIG(word, u16)
158 PCI_USER_READ_CONFIG(dword, u32)
159 PCI_USER_WRITE_CONFIG(byte, u8)
160 PCI_USER_WRITE_CONFIG(word, u16)
161 PCI_USER_WRITE_CONFIG(dword, u32)
163 /* VPD access through PCI 2.2+ VPD capability */
165 #define PCI_VPD_PCI22_SIZE (PCI_VPD_ADDR_MASK + 1)
167 struct pci_vpd_pci22 {
168 struct pci_vpd base;
169 struct mutex lock;
170 u16 flag;
171 bool busy;
172 u8 cap;
176 * Wait for last operation to complete.
177 * This code has to spin since there is no other notification from the PCI
178 * hardware. Since the VPD is often implemented by serial attachment to an
179 * EEPROM, it may take many milliseconds to complete.
181 static int pci_vpd_pci22_wait(struct pci_dev *dev)
183 struct pci_vpd_pci22 *vpd =
184 container_of(dev->vpd, struct pci_vpd_pci22, base);
185 unsigned long timeout = jiffies + HZ/20 + 2;
186 u16 status;
187 int ret;
189 if (!vpd->busy)
190 return 0;
192 for (;;) {
193 ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR,
194 &status);
195 if (ret)
196 return ret;
198 if ((status & PCI_VPD_ADDR_F) == vpd->flag) {
199 vpd->busy = false;
200 return 0;
203 if (time_after(jiffies, timeout))
204 return -ETIMEDOUT;
205 if (fatal_signal_pending(current))
206 return -EINTR;
207 if (!cond_resched())
208 udelay(10);
212 static ssize_t pci_vpd_pci22_read(struct pci_dev *dev, loff_t pos, size_t count,
213 void *arg)
215 struct pci_vpd_pci22 *vpd =
216 container_of(dev->vpd, struct pci_vpd_pci22, base);
217 int ret;
218 loff_t end = pos + count;
219 u8 *buf = arg;
221 if (pos < 0 || pos > vpd->base.len || end > vpd->base.len)
222 return -EINVAL;
224 if (mutex_lock_killable(&vpd->lock))
225 return -EINTR;
227 ret = pci_vpd_pci22_wait(dev);
228 if (ret < 0)
229 goto out;
231 while (pos < end) {
232 u32 val;
233 unsigned int i, skip;
235 ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR,
236 pos & ~3);
237 if (ret < 0)
238 break;
239 vpd->busy = true;
240 vpd->flag = PCI_VPD_ADDR_F;
241 ret = pci_vpd_pci22_wait(dev);
242 if (ret < 0)
243 break;
245 ret = pci_user_read_config_dword(dev, vpd->cap + PCI_VPD_DATA, &val);
246 if (ret < 0)
247 break;
249 skip = pos & 3;
250 for (i = 0; i < sizeof(u32); i++) {
251 if (i >= skip) {
252 *buf++ = val;
253 if (++pos == end)
254 break;
256 val >>= 8;
259 out:
260 mutex_unlock(&vpd->lock);
261 return ret ? ret : count;
264 static ssize_t pci_vpd_pci22_write(struct pci_dev *dev, loff_t pos, size_t count,
265 const void *arg)
267 struct pci_vpd_pci22 *vpd =
268 container_of(dev->vpd, struct pci_vpd_pci22, base);
269 const u8 *buf = arg;
270 loff_t end = pos + count;
271 int ret = 0;
273 if (pos < 0 || (pos & 3) || (count & 3) || end > vpd->base.len)
274 return -EINVAL;
276 if (mutex_lock_killable(&vpd->lock))
277 return -EINTR;
279 ret = pci_vpd_pci22_wait(dev);
280 if (ret < 0)
281 goto out;
283 while (pos < end) {
284 u32 val;
286 val = *buf++;
287 val |= *buf++ << 8;
288 val |= *buf++ << 16;
289 val |= *buf++ << 24;
291 ret = pci_user_write_config_dword(dev, vpd->cap + PCI_VPD_DATA, val);
292 if (ret < 0)
293 break;
294 ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR,
295 pos | PCI_VPD_ADDR_F);
296 if (ret < 0)
297 break;
299 vpd->busy = true;
300 vpd->flag = 0;
301 ret = pci_vpd_pci22_wait(dev);
303 pos += sizeof(u32);
305 out:
306 mutex_unlock(&vpd->lock);
307 return ret ? ret : count;
310 static void pci_vpd_pci22_release(struct pci_dev *dev)
312 kfree(container_of(dev->vpd, struct pci_vpd_pci22, base));
315 static const struct pci_vpd_ops pci_vpd_pci22_ops = {
316 .read = pci_vpd_pci22_read,
317 .write = pci_vpd_pci22_write,
318 .release = pci_vpd_pci22_release,
321 int pci_vpd_pci22_init(struct pci_dev *dev)
323 struct pci_vpd_pci22 *vpd;
324 u8 cap;
326 cap = pci_find_capability(dev, PCI_CAP_ID_VPD);
327 if (!cap)
328 return -ENODEV;
329 vpd = kzalloc(sizeof(*vpd), GFP_ATOMIC);
330 if (!vpd)
331 return -ENOMEM;
333 vpd->base.len = PCI_VPD_PCI22_SIZE;
334 vpd->base.ops = &pci_vpd_pci22_ops;
335 mutex_init(&vpd->lock);
336 vpd->cap = cap;
337 vpd->busy = false;
338 dev->vpd = &vpd->base;
339 return 0;
343 * pci_vpd_truncate - Set available Vital Product Data size
344 * @dev: pci device struct
345 * @size: available memory in bytes
347 * Adjust size of available VPD area.
349 int pci_vpd_truncate(struct pci_dev *dev, size_t size)
351 if (!dev->vpd)
352 return -EINVAL;
354 /* limited by the access method */
355 if (size > dev->vpd->len)
356 return -EINVAL;
358 dev->vpd->len = size;
359 if (dev->vpd->attr)
360 dev->vpd->attr->size = size;
362 return 0;
364 EXPORT_SYMBOL(pci_vpd_truncate);
367 * pci_block_user_cfg_access - Block userspace PCI config reads/writes
368 * @dev: pci device struct
370 * When user access is blocked, any reads or writes to config space will
371 * sleep until access is unblocked again. We don't allow nesting of
372 * block/unblock calls.
374 void pci_block_user_cfg_access(struct pci_dev *dev)
376 unsigned long flags;
377 int was_blocked;
379 spin_lock_irqsave(&pci_lock, flags);
380 was_blocked = dev->block_ucfg_access;
381 dev->block_ucfg_access = 1;
382 spin_unlock_irqrestore(&pci_lock, flags);
384 /* If we BUG() inside the pci_lock, we're guaranteed to hose
385 * the machine */
386 BUG_ON(was_blocked);
388 EXPORT_SYMBOL_GPL(pci_block_user_cfg_access);
391 * pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes
392 * @dev: pci device struct
394 * This function allows userspace PCI config accesses to resume.
396 void pci_unblock_user_cfg_access(struct pci_dev *dev)
398 unsigned long flags;
400 spin_lock_irqsave(&pci_lock, flags);
402 /* This indicates a problem in the caller, but we don't need
403 * to kill them, unlike a double-block above. */
404 WARN_ON(!dev->block_ucfg_access);
406 dev->block_ucfg_access = 0;
407 wake_up_all(&pci_ucfg_wait);
408 spin_unlock_irqrestore(&pci_lock, flags);
410 EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access);