2 * MCT (Magic Control Technology Corp.) USB RS232 Converter Driver
4 * Copyright (C) 2000 Wolfgang Grandegger (wolfgang@ces.ch)
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is largely derived from the Belkin USB Serial Adapter Driver
12 * (see belkin_sa.[ch]). All of the information about the device was acquired
13 * by using SniffUSB on Windows98. For technical details see mct_u232.h.
15 * William G. Greathouse and Greg Kroah-Hartman provided great help on how to
16 * do the reverse engineering and how to write a USB serial device driver.
18 * TO BE DONE, TO BE CHECKED:
19 * DTR/RTS signal handling may be incomplete or incorrect. I have mainly
20 * implemented what I have seen with SniffUSB or found in belkin_sa.c.
21 * For further TODOs check also belkin_sa.c.
24 * Basic tests have been performed with minicom/zmodem transfers and
25 * modem dialing under Linux 2.4.0-test10 (for me it works fine).
27 * 04-Nov-2003 Bill Marr <marr at flex dot com>
28 * - Mimic Windows driver by sending 2 USB 'device request' messages
29 * following normal 'baud rate change' message. This allows data to be
30 * transmitted to RS-232 devices which don't assert the 'CTS' signal.
32 * 10-Nov-2001 Wolfgang Grandegger
33 * - Fixed an endianess problem with the baudrate selection for PowerPC.
35 * 06-Dec-2001 Martin Hamilton <martinh@gnu.org>
36 * Added support for the Belkin F5U109 DB9 adaptor
38 * 30-May-2001 Greg Kroah-Hartman
39 * switched from using spinlock to a semaphore, which fixes lots of problems.
41 * 04-May-2001 Stelian Pop
42 * - Set the maximum bulk output size for Sitecom U232-P25 model to 16 bytes
43 * instead of the device reported 32 (using 32 bytes causes many data
44 * loss, Windows driver uses 16 too).
46 * 02-May-2001 Stelian Pop
47 * - Fixed the baud calculation for Sitecom U232-P25 model
50 * - Identify version on module load.
52 * 06-Jan-2001 Cornel Ciocirlan
53 * - Added support for Sitecom U232-P25 model (Product Id 0x0230)
54 * - Added support for D-Link DU-H3SP USB BAY (Product Id 0x0200)
56 * 29-Nov-2000 Greg Kroah-Hartman
57 * - Added device id table to fit with 2.4.0-test11 structure.
58 * - took out DEAL_WITH_TWO_INT_IN_ENDPOINTS #define as it's not needed
59 * (lots of things will change if/when the usb-serial core changes to
60 * handle these issues.
62 * 27-Nov-2000 Wolfgang Grandegger
63 * A version for kernel 2.4.0-test10 released to the Linux community
64 * (via linux-usb-devel).
67 #include <linux/kernel.h>
68 #include <linux/errno.h>
69 #include <linux/init.h>
70 #include <linux/slab.h>
71 #include <linux/tty.h>
72 #include <linux/tty_driver.h>
73 #include <linux/tty_flip.h>
74 #include <linux/module.h>
75 #include <linux/spinlock.h>
76 #include <asm/uaccess.h>
77 #include <linux/usb.h>
78 #include <linux/usb/serial.h>
84 #define DRIVER_VERSION "z2.1" /* Linux in-kernel version */
85 #define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>"
86 #define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver"
93 static int mct_u232_startup (struct usb_serial
*serial
);
94 static void mct_u232_shutdown (struct usb_serial
*serial
);
95 static int mct_u232_open (struct usb_serial_port
*port
,
97 static void mct_u232_close (struct usb_serial_port
*port
,
99 static void mct_u232_read_int_callback (struct urb
*urb
);
100 static void mct_u232_set_termios (struct usb_serial_port
*port
,
101 struct ktermios
* old
);
102 static int mct_u232_ioctl (struct usb_serial_port
*port
,
106 static void mct_u232_break_ctl (struct usb_serial_port
*port
,
108 static int mct_u232_tiocmget (struct usb_serial_port
*port
,
110 static int mct_u232_tiocmset (struct usb_serial_port
*port
,
111 struct file
*file
, unsigned int set
,
113 static void mct_u232_throttle (struct usb_serial_port
*port
);
114 static void mct_u232_unthrottle (struct usb_serial_port
*port
);
118 * All of the device info needed for the MCT USB-RS232 converter.
120 static struct usb_device_id id_table_combined
[] = {
121 { USB_DEVICE(MCT_U232_VID
, MCT_U232_PID
) },
122 { USB_DEVICE(MCT_U232_VID
, MCT_U232_SITECOM_PID
) },
123 { USB_DEVICE(MCT_U232_VID
, MCT_U232_DU_H3SP_PID
) },
124 { USB_DEVICE(MCT_U232_BELKIN_F5U109_VID
, MCT_U232_BELKIN_F5U109_PID
) },
125 { } /* Terminating entry */
128 MODULE_DEVICE_TABLE (usb
, id_table_combined
);
130 static struct usb_driver mct_u232_driver
= {
132 .probe
= usb_serial_probe
,
133 .disconnect
= usb_serial_disconnect
,
134 .id_table
= id_table_combined
,
138 static struct usb_serial_driver mct_u232_device
= {
140 .owner
= THIS_MODULE
,
143 .description
= "MCT U232",
144 .usb_driver
= &mct_u232_driver
,
145 .id_table
= id_table_combined
,
146 .num_interrupt_in
= 2,
150 .open
= mct_u232_open
,
151 .close
= mct_u232_close
,
152 .throttle
= mct_u232_throttle
,
153 .unthrottle
= mct_u232_unthrottle
,
154 .read_int_callback
= mct_u232_read_int_callback
,
155 .ioctl
= mct_u232_ioctl
,
156 .set_termios
= mct_u232_set_termios
,
157 .break_ctl
= mct_u232_break_ctl
,
158 .tiocmget
= mct_u232_tiocmget
,
159 .tiocmset
= mct_u232_tiocmset
,
160 .attach
= mct_u232_startup
,
161 .shutdown
= mct_u232_shutdown
,
165 struct mct_u232_private
{
167 unsigned int control_state
; /* Modem Line Setting (TIOCM) */
168 unsigned char last_lcr
; /* Line Control Register */
169 unsigned char last_lsr
; /* Line Status Register */
170 unsigned char last_msr
; /* Modem Status Register */
171 unsigned int rx_flags
; /* Throttling flags */
174 #define THROTTLED 0x01
177 * Handle vendor specific USB requests
180 #define WDR_TIMEOUT 5000 /* default urb timeout */
183 * Later day 2.6.0-test kernels have new baud rates like B230400 which
184 * we do not know how to support. We ignore them for the moment.
185 * XXX Rate-limit the error message, it's user triggerable.
187 static int mct_u232_calculate_baud_rate(struct usb_serial
*serial
, int value
)
189 if (le16_to_cpu(serial
->dev
->descriptor
.idProduct
) == MCT_U232_SITECOM_PID
190 || le16_to_cpu(serial
->dev
->descriptor
.idProduct
) == MCT_U232_BELKIN_F5U109_PID
) {
192 case B300
: return 0x01;
193 case B600
: return 0x02; /* this one not tested */
194 case B1200
: return 0x03;
195 case B2400
: return 0x04;
196 case B4800
: return 0x06;
197 case B9600
: return 0x08;
198 case B19200
: return 0x09;
199 case B38400
: return 0x0a;
200 case B57600
: return 0x0b;
201 case B115200
: return 0x0c;
203 err("MCT USB-RS232: unsupported baudrate request 0x%x,"
204 " using default of B9600", value
);
209 case B300
: value
= 300; break;
210 case B600
: value
= 600; break;
211 case B1200
: value
= 1200; break;
212 case B2400
: value
= 2400; break;
213 case B4800
: value
= 4800; break;
214 case B9600
: value
= 9600; break;
215 case B19200
: value
= 19200; break;
216 case B38400
: value
= 38400; break;
217 case B57600
: value
= 57600; break;
218 case B115200
: value
= 115200; break;
220 err("MCT USB-RS232: unsupported baudrate request 0x%x,"
221 " using default of B9600", value
);
228 static int mct_u232_set_baud_rate(struct usb_serial
*serial
, struct usb_serial_port
*port
,
233 unsigned char zero_byte
= 0;
234 unsigned char cts_enable_byte
= 0;
236 divisor
= cpu_to_le32(mct_u232_calculate_baud_rate(serial
, value
));
238 rc
= usb_control_msg(serial
->dev
, usb_sndctrlpipe(serial
->dev
, 0),
239 MCT_U232_SET_BAUD_RATE_REQUEST
,
240 MCT_U232_SET_REQUEST_TYPE
,
241 0, 0, &divisor
, MCT_U232_SET_BAUD_RATE_SIZE
,
244 err("Set BAUD RATE %d failed (error = %d)", value
, rc
);
245 dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value
, divisor
);
247 /* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which
248 always sends two extra USB 'device request' messages after the
249 'baud rate change' message. The actual functionality of the
250 request codes in these messages is not fully understood but these
251 particular codes are never seen in any operation besides a baud
252 rate change. Both of these messages send a single byte of data.
253 In the first message, the value of this byte is always zero.
255 The second message has been determined experimentally to control
256 whether data will be transmitted to a device which is not asserting
257 the 'CTS' signal. If the second message's data byte is zero, data
258 will be transmitted even if 'CTS' is not asserted (i.e. no hardware
259 flow control). if the second message's data byte is nonzero (a value
260 of 1 is used by this driver), data will not be transmitted to a device
261 which is not asserting 'CTS'.
264 rc
= usb_control_msg(serial
->dev
, usb_sndctrlpipe(serial
->dev
, 0),
265 MCT_U232_SET_UNKNOWN1_REQUEST
,
266 MCT_U232_SET_REQUEST_TYPE
,
267 0, 0, &zero_byte
, MCT_U232_SET_UNKNOWN1_SIZE
,
270 err("Sending USB device request code %d failed (error = %d)",
271 MCT_U232_SET_UNKNOWN1_REQUEST
, rc
);
273 if (port
&& C_CRTSCTS(port
->tty
)) {
277 dbg("set_baud_rate: send second control message, data = %02X", cts_enable_byte
);
278 rc
= usb_control_msg(serial
->dev
, usb_sndctrlpipe(serial
->dev
, 0),
279 MCT_U232_SET_CTS_REQUEST
,
280 MCT_U232_SET_REQUEST_TYPE
,
281 0, 0, &cts_enable_byte
, MCT_U232_SET_CTS_SIZE
,
284 err("Sending USB device request code %d failed (error = %d)",
285 MCT_U232_SET_CTS_REQUEST
, rc
);
288 } /* mct_u232_set_baud_rate */
290 static int mct_u232_set_line_ctrl(struct usb_serial
*serial
, unsigned char lcr
)
293 rc
= usb_control_msg(serial
->dev
, usb_sndctrlpipe(serial
->dev
, 0),
294 MCT_U232_SET_LINE_CTRL_REQUEST
,
295 MCT_U232_SET_REQUEST_TYPE
,
296 0, 0, &lcr
, MCT_U232_SET_LINE_CTRL_SIZE
,
299 err("Set LINE CTRL 0x%x failed (error = %d)", lcr
, rc
);
300 dbg("set_line_ctrl: 0x%x", lcr
);
302 } /* mct_u232_set_line_ctrl */
304 static int mct_u232_set_modem_ctrl(struct usb_serial
*serial
,
305 unsigned int control_state
)
308 unsigned char mcr
= MCT_U232_MCR_NONE
;
310 if (control_state
& TIOCM_DTR
)
311 mcr
|= MCT_U232_MCR_DTR
;
312 if (control_state
& TIOCM_RTS
)
313 mcr
|= MCT_U232_MCR_RTS
;
315 rc
= usb_control_msg(serial
->dev
, usb_sndctrlpipe(serial
->dev
, 0),
316 MCT_U232_SET_MODEM_CTRL_REQUEST
,
317 MCT_U232_SET_REQUEST_TYPE
,
318 0, 0, &mcr
, MCT_U232_SET_MODEM_CTRL_SIZE
,
321 err("Set MODEM CTRL 0x%x failed (error = %d)", mcr
, rc
);
322 dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state
, mcr
);
325 } /* mct_u232_set_modem_ctrl */
327 static int mct_u232_get_modem_stat(struct usb_serial
*serial
, unsigned char *msr
)
330 rc
= usb_control_msg(serial
->dev
, usb_rcvctrlpipe(serial
->dev
, 0),
331 MCT_U232_GET_MODEM_STAT_REQUEST
,
332 MCT_U232_GET_REQUEST_TYPE
,
333 0, 0, msr
, MCT_U232_GET_MODEM_STAT_SIZE
,
336 err("Get MODEM STATus failed (error = %d)", rc
);
339 dbg("get_modem_stat: 0x%x", *msr
);
341 } /* mct_u232_get_modem_stat */
343 static void mct_u232_msr_to_state(unsigned int *control_state
, unsigned char msr
)
345 /* Translate Control Line states */
346 if (msr
& MCT_U232_MSR_DSR
)
347 *control_state
|= TIOCM_DSR
;
349 *control_state
&= ~TIOCM_DSR
;
350 if (msr
& MCT_U232_MSR_CTS
)
351 *control_state
|= TIOCM_CTS
;
353 *control_state
&= ~TIOCM_CTS
;
354 if (msr
& MCT_U232_MSR_RI
)
355 *control_state
|= TIOCM_RI
;
357 *control_state
&= ~TIOCM_RI
;
358 if (msr
& MCT_U232_MSR_CD
)
359 *control_state
|= TIOCM_CD
;
361 *control_state
&= ~TIOCM_CD
;
362 dbg("msr_to_state: msr=0x%x ==> state=0x%x", msr
, *control_state
);
363 } /* mct_u232_msr_to_state */
366 * Driver's tty interface functions
369 static int mct_u232_startup (struct usb_serial
*serial
)
371 struct mct_u232_private
*priv
;
372 struct usb_serial_port
*port
, *rport
;
374 priv
= kzalloc(sizeof(struct mct_u232_private
), GFP_KERNEL
);
377 spin_lock_init(&priv
->lock
);
378 usb_set_serial_port_data(serial
->port
[0], priv
);
380 init_waitqueue_head(&serial
->port
[0]->write_wait
);
382 /* Puh, that's dirty */
383 port
= serial
->port
[0];
384 rport
= serial
->port
[1];
385 /* No unlinking, it wasn't submitted yet. */
386 usb_free_urb(port
->read_urb
);
387 port
->read_urb
= rport
->interrupt_in_urb
;
388 rport
->interrupt_in_urb
= NULL
;
389 port
->read_urb
->context
= port
;
392 } /* mct_u232_startup */
395 static void mct_u232_shutdown (struct usb_serial
*serial
)
397 struct mct_u232_private
*priv
;
400 dbg("%s", __FUNCTION__
);
402 for (i
=0; i
< serial
->num_ports
; ++i
) {
403 /* My special items, the standard routines free my urbs */
404 priv
= usb_get_serial_port_data(serial
->port
[i
]);
406 usb_set_serial_port_data(serial
->port
[i
], NULL
);
410 } /* mct_u232_shutdown */
412 static int mct_u232_open (struct usb_serial_port
*port
, struct file
*filp
)
414 struct usb_serial
*serial
= port
->serial
;
415 struct mct_u232_private
*priv
= usb_get_serial_port_data(port
);
417 unsigned int control_state
;
419 unsigned char last_lcr
;
420 unsigned char last_msr
;
422 dbg("%s port %d", __FUNCTION__
, port
->number
);
424 /* Compensate for a hardware bug: although the Sitecom U232-P25
425 * device reports a maximum output packet size of 32 bytes,
426 * it seems to be able to accept only 16 bytes (and that's what
427 * SniffUSB says too...)
429 if (le16_to_cpu(serial
->dev
->descriptor
.idProduct
) == MCT_U232_SITECOM_PID
)
430 port
->bulk_out_size
= 16;
432 /* Do a defined restart: the normal serial device seems to
433 * always turn on DTR and RTS here, so do the same. I'm not
434 * sure if this is really necessary. But it should not harm
437 spin_lock_irqsave(&priv
->lock
, flags
);
438 if (port
->tty
->termios
->c_cflag
& CBAUD
)
439 priv
->control_state
= TIOCM_DTR
| TIOCM_RTS
;
441 priv
->control_state
= 0;
443 priv
->last_lcr
= (MCT_U232_DATA_BITS_8
|
444 MCT_U232_PARITY_NONE
|
445 MCT_U232_STOP_BITS_1
);
446 control_state
= priv
->control_state
;
447 last_lcr
= priv
->last_lcr
;
448 spin_unlock_irqrestore(&priv
->lock
, flags
);
449 mct_u232_set_modem_ctrl(serial
, control_state
);
450 mct_u232_set_line_ctrl(serial
, last_lcr
);
452 /* Read modem status and update control state */
453 mct_u232_get_modem_stat(serial
, &last_msr
);
454 spin_lock_irqsave(&priv
->lock
, flags
);
455 priv
->last_msr
= last_msr
;
456 mct_u232_msr_to_state(&priv
->control_state
, priv
->last_msr
);
457 spin_unlock_irqrestore(&priv
->lock
, flags
);
459 port
->read_urb
->dev
= port
->serial
->dev
;
460 retval
= usb_submit_urb(port
->read_urb
, GFP_KERNEL
);
462 err("usb_submit_urb(read bulk) failed pipe 0x%x err %d",
463 port
->read_urb
->pipe
, retval
);
467 port
->interrupt_in_urb
->dev
= port
->serial
->dev
;
468 retval
= usb_submit_urb(port
->interrupt_in_urb
, GFP_KERNEL
);
470 usb_kill_urb(port
->read_urb
);
471 err(" usb_submit_urb(read int) failed pipe 0x%x err %d",
472 port
->interrupt_in_urb
->pipe
, retval
);
479 } /* mct_u232_open */
482 static void mct_u232_close (struct usb_serial_port
*port
, struct file
*filp
)
484 unsigned int c_cflag
;
486 unsigned int control_state
;
487 struct mct_u232_private
*priv
= usb_get_serial_port_data(port
);
488 dbg("%s port %d", __FUNCTION__
, port
->number
);
491 c_cflag
= port
->tty
->termios
->c_cflag
;
492 if (c_cflag
& HUPCL
) {
493 /* drop DTR and RTS */
494 spin_lock_irqsave(&priv
->lock
, flags
);
495 priv
->control_state
&= ~(TIOCM_DTR
| TIOCM_RTS
);
496 control_state
= priv
->control_state
;
497 spin_unlock_irqrestore(&priv
->lock
, flags
);
498 mct_u232_set_modem_ctrl(port
->serial
, control_state
);
503 if (port
->serial
->dev
) {
504 /* shutdown our urbs */
505 usb_kill_urb(port
->write_urb
);
506 usb_kill_urb(port
->read_urb
);
507 usb_kill_urb(port
->interrupt_in_urb
);
509 } /* mct_u232_close */
512 static void mct_u232_read_int_callback (struct urb
*urb
)
514 struct usb_serial_port
*port
= (struct usb_serial_port
*)urb
->context
;
515 struct mct_u232_private
*priv
= usb_get_serial_port_data(port
);
516 struct usb_serial
*serial
= port
->serial
;
517 struct tty_struct
*tty
;
518 unsigned char *data
= urb
->transfer_buffer
;
520 int status
= urb
->status
;
530 /* this urb is terminated, clean up */
531 dbg("%s - urb shutting down with status: %d",
532 __FUNCTION__
, status
);
535 dbg("%s - nonzero urb status received: %d",
536 __FUNCTION__
, status
);
541 dbg("%s - bad serial pointer, exiting", __FUNCTION__
);
545 dbg("%s - port %d", __FUNCTION__
, port
->number
);
546 usb_serial_debug_data(debug
, &port
->dev
, __FUNCTION__
, urb
->actual_length
, data
);
549 * Work-a-round: handle the 'usual' bulk-in pipe here
551 if (urb
->transfer_buffer_length
> 2) {
554 if (urb
->actual_length
) {
555 for (i
= 0; i
< urb
->actual_length
; ++i
) {
556 tty_insert_flip_char(tty
, data
[i
], 0);
558 tty_flip_buffer_push(tty
);
564 * The interrupt-in pipe signals exceptional conditions (modem line
565 * signal changes and errors). data[0] holds MSR, data[1] holds LSR.
567 spin_lock_irqsave(&priv
->lock
, flags
);
568 priv
->last_msr
= data
[MCT_U232_MSR_INDEX
];
570 /* Record Control Line states */
571 mct_u232_msr_to_state(&priv
->control_state
, priv
->last_msr
);
574 /* Not yet handled. See belin_sa.c for further information */
575 /* Now to report any errors */
576 priv
->last_lsr
= data
[MCT_U232_LSR_INDEX
];
578 * fill in the flip buffer here, but I do not know the relation
579 * to the current/next receive buffer or characters. I need
580 * to look in to this before committing any code.
582 if (priv
->last_lsr
& MCT_U232_LSR_ERR
) {
585 if (priv
->last_lsr
& MCT_U232_LSR_OE
) {
588 if (priv
->last_lsr
& MCT_U232_LSR_PE
) {
591 if (priv
->last_lsr
& MCT_U232_LSR_FE
) {
593 /* Break Indicator */
594 if (priv
->last_lsr
& MCT_U232_LSR_BI
) {
598 spin_unlock_irqrestore(&priv
->lock
, flags
);
600 retval
= usb_submit_urb (urb
, GFP_ATOMIC
);
602 err ("%s - usb_submit_urb failed with result %d",
603 __FUNCTION__
, retval
);
604 } /* mct_u232_read_int_callback */
606 static void mct_u232_set_termios (struct usb_serial_port
*port
,
607 struct ktermios
*old_termios
)
609 struct usb_serial
*serial
= port
->serial
;
610 struct mct_u232_private
*priv
= usb_get_serial_port_data(port
);
611 unsigned int cflag
= port
->tty
->termios
->c_cflag
;
612 unsigned int old_cflag
= old_termios
->c_cflag
;
614 unsigned int control_state
;
615 unsigned char last_lcr
;
617 /* get a local copy of the current port settings */
618 spin_lock_irqsave(&priv
->lock
, flags
);
619 control_state
= priv
->control_state
;
620 spin_unlock_irqrestore(&priv
->lock
, flags
);
625 * Do not attempt to cache old rates and skip settings,
626 * disconnects screw such tricks up completely.
627 * Premature optimization is the root of all evil.
630 /* reassert DTR and RTS on transition from B0 */
631 if ((old_cflag
& CBAUD
) == B0
) {
632 dbg("%s: baud was B0", __FUNCTION__
);
633 control_state
|= TIOCM_DTR
| TIOCM_RTS
;
634 mct_u232_set_modem_ctrl(serial
, control_state
);
637 mct_u232_set_baud_rate(serial
, port
, cflag
& CBAUD
);
639 if ((cflag
& CBAUD
) == B0
) {
640 dbg("%s: baud is B0", __FUNCTION__
);
641 /* Drop RTS and DTR */
642 control_state
&= ~(TIOCM_DTR
| TIOCM_RTS
);
643 mct_u232_set_modem_ctrl(serial
, control_state
);
647 * Update line control register (LCR)
652 last_lcr
|= (cflag
& PARODD
) ?
653 MCT_U232_PARITY_ODD
: MCT_U232_PARITY_EVEN
;
655 last_lcr
|= MCT_U232_PARITY_NONE
;
657 /* set the number of data bits */
658 switch (cflag
& CSIZE
) {
660 last_lcr
|= MCT_U232_DATA_BITS_5
; break;
662 last_lcr
|= MCT_U232_DATA_BITS_6
; break;
664 last_lcr
|= MCT_U232_DATA_BITS_7
; break;
666 last_lcr
|= MCT_U232_DATA_BITS_8
; break;
668 err("CSIZE was not CS5-CS8, using default of 8");
669 last_lcr
|= MCT_U232_DATA_BITS_8
;
673 /* set the number of stop bits */
674 last_lcr
|= (cflag
& CSTOPB
) ?
675 MCT_U232_STOP_BITS_2
: MCT_U232_STOP_BITS_1
;
677 mct_u232_set_line_ctrl(serial
, last_lcr
);
679 /* save off the modified port settings */
680 spin_lock_irqsave(&priv
->lock
, flags
);
681 priv
->control_state
= control_state
;
682 priv
->last_lcr
= last_lcr
;
683 spin_unlock_irqrestore(&priv
->lock
, flags
);
684 } /* mct_u232_set_termios */
686 static void mct_u232_break_ctl( struct usb_serial_port
*port
, int break_state
)
688 struct usb_serial
*serial
= port
->serial
;
689 struct mct_u232_private
*priv
= usb_get_serial_port_data(port
);
693 dbg("%sstate=%d", __FUNCTION__
, break_state
);
695 spin_lock_irqsave(&priv
->lock
, flags
);
696 lcr
= priv
->last_lcr
;
697 spin_unlock_irqrestore(&priv
->lock
, flags
);
700 lcr
|= MCT_U232_SET_BREAK
;
702 mct_u232_set_line_ctrl(serial
, lcr
);
703 } /* mct_u232_break_ctl */
706 static int mct_u232_tiocmget (struct usb_serial_port
*port
, struct file
*file
)
708 struct mct_u232_private
*priv
= usb_get_serial_port_data(port
);
709 unsigned int control_state
;
712 dbg("%s", __FUNCTION__
);
714 spin_lock_irqsave(&priv
->lock
, flags
);
715 control_state
= priv
->control_state
;
716 spin_unlock_irqrestore(&priv
->lock
, flags
);
718 return control_state
;
721 static int mct_u232_tiocmset (struct usb_serial_port
*port
, struct file
*file
,
722 unsigned int set
, unsigned int clear
)
724 struct usb_serial
*serial
= port
->serial
;
725 struct mct_u232_private
*priv
= usb_get_serial_port_data(port
);
726 unsigned int control_state
;
729 dbg("%s", __FUNCTION__
);
731 spin_lock_irqsave(&priv
->lock
, flags
);
732 control_state
= priv
->control_state
;
735 control_state
|= TIOCM_RTS
;
737 control_state
|= TIOCM_DTR
;
738 if (clear
& TIOCM_RTS
)
739 control_state
&= ~TIOCM_RTS
;
740 if (clear
& TIOCM_DTR
)
741 control_state
&= ~TIOCM_DTR
;
743 priv
->control_state
= control_state
;
744 spin_unlock_irqrestore(&priv
->lock
, flags
);
745 return mct_u232_set_modem_ctrl(serial
, control_state
);
748 static int mct_u232_ioctl (struct usb_serial_port
*port
, struct file
* file
,
749 unsigned int cmd
, unsigned long arg
)
751 dbg("%scmd=0x%x", __FUNCTION__
, cmd
);
753 /* Based on code from acm.c and others */
756 /* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
761 /* return count of modemline transitions */
766 dbg("%s: arg not supported - 0x%04x", __FUNCTION__
,cmd
);
767 return(-ENOIOCTLCMD
);
771 } /* mct_u232_ioctl */
773 static void mct_u232_throttle (struct usb_serial_port
*port
)
775 struct mct_u232_private
*priv
= usb_get_serial_port_data(port
);
777 unsigned int control_state
;
778 struct tty_struct
*tty
;
781 dbg("%s - port %d", __FUNCTION__
, port
->number
);
783 spin_lock_irqsave(&priv
->lock
, flags
);
784 priv
->rx_flags
|= THROTTLED
;
785 if (C_CRTSCTS(tty
)) {
786 priv
->control_state
&= ~TIOCM_RTS
;
787 control_state
= priv
->control_state
;
788 spin_unlock_irqrestore(&priv
->lock
, flags
);
789 (void) mct_u232_set_modem_ctrl(port
->serial
, control_state
);
791 spin_unlock_irqrestore(&priv
->lock
, flags
);
796 static void mct_u232_unthrottle (struct usb_serial_port
*port
)
798 struct mct_u232_private
*priv
= usb_get_serial_port_data(port
);
800 unsigned int control_state
;
801 struct tty_struct
*tty
;
803 dbg("%s - port %d", __FUNCTION__
, port
->number
);
806 spin_lock_irqsave(&priv
->lock
, flags
);
807 if ((priv
->rx_flags
& THROTTLED
) && C_CRTSCTS(tty
)) {
808 priv
->rx_flags
&= ~THROTTLED
;
809 priv
->control_state
|= TIOCM_RTS
;
810 control_state
= priv
->control_state
;
811 spin_unlock_irqrestore(&priv
->lock
, flags
);
812 (void) mct_u232_set_modem_ctrl(port
->serial
, control_state
);
814 spin_unlock_irqrestore(&priv
->lock
, flags
);
818 static int __init
mct_u232_init (void)
821 retval
= usb_serial_register(&mct_u232_device
);
823 goto failed_usb_serial_register
;
824 retval
= usb_register(&mct_u232_driver
);
826 goto failed_usb_register
;
827 info(DRIVER_DESC
" " DRIVER_VERSION
);
830 usb_serial_deregister(&mct_u232_device
);
831 failed_usb_serial_register
:
836 static void __exit
mct_u232_exit (void)
838 usb_deregister (&mct_u232_driver
);
839 usb_serial_deregister (&mct_u232_device
);
843 module_init (mct_u232_init
);
844 module_exit(mct_u232_exit
);
846 MODULE_AUTHOR( DRIVER_AUTHOR
);
847 MODULE_DESCRIPTION( DRIVER_DESC
);
848 MODULE_LICENSE("GPL");
850 module_param(debug
, bool, S_IRUGO
| S_IWUSR
);
851 MODULE_PARM_DESC(debug
, "Debug enabled or not");