fanotify: fill in the metadata_len field on struct fanotify_event_metadata

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / media / dvb / frontends / dib7000p.c

/*
 * Linux-DVB Driver for DiBcom's second generation DiB7000P (PC).
 *
 * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
 *
 * This program is free software; you can redistribute it and/or
 *      modify it under the terms of the GNU General Public License as
 *      published by the Free Software Foundation, version 2.
 */
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/i2c.h>

#include "dvb_math.h"
#include "dvb_frontend.h"

#include "dib7000p.h"

static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");

static int buggy_sfn_workaround;
module_param(buggy_sfn_workaround, int, 0644);
MODULE_PARM_DESC(buggy_sfn_workaround, "Enable work-around for buggy SFNs (default: 0)");

#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000P: "); printk(args); printk("\n"); } } while (0)

struct dib7000p_state {
        struct dvb_frontend demod;
    struct dib7000p_config cfg;

        u8 i2c_addr;
        struct i2c_adapter   *i2c_adap;

        struct dibx000_i2c_master i2c_master;

        u16 wbd_ref;

        u8  current_band;
        u32 current_bandwidth;
        struct dibx000_agc_config *current_agc;
        u32 timf;

        u8 div_force_off : 1;
        u8 div_state : 1;
        u16 div_sync_wait;

        u8 agc_state;

        u16 gpio_dir;
        u16 gpio_val;

        u8 sfn_workaround_active :1;
};

enum dib7000p_power_mode {
        DIB7000P_POWER_ALL = 0,
        DIB7000P_POWER_ANALOG_ADC,
        DIB7000P_POWER_INTERFACE_ONLY,
};

static u16 dib7000p_read_word(struct dib7000p_state *state, u16 reg)
{
        u8 wb[2] = { reg >> 8, reg & 0xff };
        u8 rb[2];
        struct i2c_msg msg[2] = {
                { .addr = state->i2c_addr >> 1, .flags = 0,        .buf = wb, .len = 2 },
                { .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 },
        };

        if (i2c_transfer(state->i2c_adap, msg, 2) != 2)
                dprintk("i2c read error on %d",reg);

        return (rb[0] << 8) | rb[1];
}

static int dib7000p_write_word(struct dib7000p_state *state, u16 reg, u16 val)
{
        u8 b[4] = {
                (reg >> 8) & 0xff, reg & 0xff,
                (val >> 8) & 0xff, val & 0xff,
        };
        struct i2c_msg msg = {
                .addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4
        };
        return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
}
static void dib7000p_write_tab(struct dib7000p_state *state, u16 *buf)
{
        u16 l = 0, r, *n;
        n = buf;
        l = *n++;
        while (l) {
                r = *n++;

                do {
                        dib7000p_write_word(state, r, *n++);
                        r++;
                } while (--l);
                l = *n++;
        }
}

static int dib7000p_set_output_mode(struct dib7000p_state *state, int mode)
{
        int    ret = 0;
        u16 outreg, fifo_threshold, smo_mode;

        outreg = 0;
        fifo_threshold = 1792;
        smo_mode = (dib7000p_read_word(state, 235) & 0x0050) | (1 << 1);

        dprintk( "setting output mode for demod %p to %d",
                        &state->demod, mode);

        switch (mode) {
                case OUTMODE_MPEG2_PAR_GATED_CLK:   // STBs with parallel gated clock
                        outreg = (1 << 10);  /* 0x0400 */
                        break;
                case OUTMODE_MPEG2_PAR_CONT_CLK:    // STBs with parallel continues clock
                        outreg = (1 << 10) | (1 << 6); /* 0x0440 */
                        break;
                case OUTMODE_MPEG2_SERIAL:          // STBs with serial input
                        outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0480 */
                        break;
                case OUTMODE_DIVERSITY:
                        if (state->cfg.hostbus_diversity)
                                outreg = (1 << 10) | (4 << 6); /* 0x0500 */
                        else
                                outreg = (1 << 11);
                        break;
                case OUTMODE_MPEG2_FIFO:            // e.g. USB feeding
                        smo_mode |= (3 << 1);
                        fifo_threshold = 512;
                        outreg = (1 << 10) | (5 << 6);
                        break;
                case OUTMODE_ANALOG_ADC:
                        outreg = (1 << 10) | (3 << 6);
                        break;
                case OUTMODE_HIGH_Z:  // disable
                        outreg = 0;
                        break;
                default:
                        dprintk( "Unhandled output_mode passed to be set for demod %p",&state->demod);
                        break;
        }

        if (state->cfg.output_mpeg2_in_188_bytes)
                smo_mode |= (1 << 5) ;

        ret |= dib7000p_write_word(state,  235, smo_mode);
        ret |= dib7000p_write_word(state,  236, fifo_threshold); /* synchronous fread */
        ret |= dib7000p_write_word(state, 1286, outreg);         /* P_Div_active */

        return ret;
}

static int dib7000p_set_diversity_in(struct dvb_frontend *demod, int onoff)
{
        struct dib7000p_state *state = demod->demodulator_priv;

        if (state->div_force_off) {
                dprintk( "diversity combination deactivated - forced by COFDM parameters");
                onoff = 0;
                dib7000p_write_word(state, 207, 0);
        } else
                dib7000p_write_word(state, 207, (state->div_sync_wait << 4) | (1 << 2) | (2 << 0));

        state->div_state = (u8)onoff;

        if (onoff) {
                dib7000p_write_word(state, 204, 6);
                dib7000p_write_word(state, 205, 16);
                /* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
        } else {
                dib7000p_write_word(state, 204, 1);
                dib7000p_write_word(state, 205, 0);
        }

        return 0;
}

static int dib7000p_set_power_mode(struct dib7000p_state *state, enum dib7000p_power_mode mode)
{
        /* by default everything is powered off */
        u16 reg_774 = 0xffff, reg_775 = 0xffff, reg_776 = 0x0007, reg_899  = 0x0003,
                reg_1280 = (0xfe00) | (dib7000p_read_word(state, 1280) & 0x01ff);

        /* now, depending on the requested mode, we power on */
        switch (mode) {
                /* power up everything in the demod */
                case DIB7000P_POWER_ALL:
                        reg_774 = 0x0000; reg_775 = 0x0000; reg_776 = 0x0; reg_899 = 0x0; reg_1280 &= 0x01ff;
                        break;

                case DIB7000P_POWER_ANALOG_ADC:
                        /* dem, cfg, iqc, sad, agc */
                        reg_774 &= ~((1 << 15) | (1 << 14) | (1 << 11) | (1 << 10) | (1 << 9));
                        /* nud */
                        reg_776 &= ~((1 << 0));
                        /* Dout */
                        reg_1280 &= ~((1 << 11));
                        /* fall through wanted to enable the interfaces */

                /* just leave power on the control-interfaces: GPIO and (I2C or SDIO) */
                case DIB7000P_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C */
                        reg_1280 &= ~((1 << 14) | (1 << 13) | (1 << 12) | (1 << 10));
                        break;

/* TODO following stuff is just converted from the dib7000-driver - check when is used what */
        }

        dib7000p_write_word(state,  774,  reg_774);
        dib7000p_write_word(state,  775,  reg_775);
        dib7000p_write_word(state,  776,  reg_776);
        dib7000p_write_word(state,  899,  reg_899);
        dib7000p_write_word(state, 1280, reg_1280);

        return 0;
}

static void dib7000p_set_adc_state(struct dib7000p_state *state, enum dibx000_adc_states no)
{
        u16 reg_908 = dib7000p_read_word(state, 908),
               reg_909 = dib7000p_read_word(state, 909);

        switch (no) {
                case DIBX000_SLOW_ADC_ON:
                        reg_909 |= (1 << 1) | (1 << 0);
                        dib7000p_write_word(state, 909, reg_909);
                        reg_909 &= ~(1 << 1);
                        break;

                case DIBX000_SLOW_ADC_OFF:
                        reg_909 |=  (1 << 1) | (1 << 0);
                        break;

                case DIBX000_ADC_ON:
                        reg_908 &= 0x0fff;
                        reg_909 &= 0x0003;
                        break;

                case DIBX000_ADC_OFF: // leave the VBG voltage on
                        reg_908 |= (1 << 14) | (1 << 13) | (1 << 12);
                        reg_909 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
                        break;

                case DIBX000_VBG_ENABLE:
                        reg_908 &= ~(1 << 15);
                        break;

                case DIBX000_VBG_DISABLE:
                        reg_908 |= (1 << 15);
                        break;

                default:
                        break;
        }

//      dprintk( "908: %x, 909: %x\n", reg_908, reg_909);

        reg_909 |= (state->cfg.disable_sample_and_hold & 1) << 4;
        reg_908 |= (state->cfg.enable_current_mirror & 1) << 7;

        dib7000p_write_word(state, 908, reg_908);
        dib7000p_write_word(state, 909, reg_909);
}

static int dib7000p_set_bandwidth(struct dib7000p_state *state, u32 bw)
{
        u32 timf;

        // store the current bandwidth for later use
        state->current_bandwidth = bw;

        if (state->timf == 0) {
                dprintk( "using default timf");
                timf = state->cfg.bw->timf;
        } else {
                dprintk( "using updated timf");
                timf = state->timf;
        }

        timf = timf * (bw / 50) / 160;

        dib7000p_write_word(state, 23, (u16) ((timf >> 16) & 0xffff));
        dib7000p_write_word(state, 24, (u16) ((timf      ) & 0xffff));

        return 0;
}

static int dib7000p_sad_calib(struct dib7000p_state *state)
{
/* internal */
//      dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
        dib7000p_write_word(state, 73, (0 << 1) | (0 << 0));
        dib7000p_write_word(state, 74, 776); // 0.625*3.3 / 4096

        /* do the calibration */
        dib7000p_write_word(state, 73, (1 << 0));
        dib7000p_write_word(state, 73, (0 << 0));

        msleep(1);

        return 0;
}

int dib7000p_set_wbd_ref(struct dvb_frontend *demod, u16 value)
{
        struct dib7000p_state *state = demod->demodulator_priv;
        if (value > 4095)
                value = 4095;
        state->wbd_ref = value;
        return dib7000p_write_word(state, 105, (dib7000p_read_word(state, 105) & 0xf000) | value);
}

EXPORT_SYMBOL(dib7000p_set_wbd_ref);
static void dib7000p_reset_pll(struct dib7000p_state *state)
{
        struct dibx000_bandwidth_config *bw = &state->cfg.bw[0];
        u16 clk_cfg0;

        /* force PLL bypass */
        clk_cfg0 = (1 << 15) | ((bw->pll_ratio & 0x3f) << 9) |
                (bw->modulo << 7) | (bw->ADClkSrc << 6) | (bw->IO_CLK_en_core << 5) |
                (bw->bypclk_div << 2) | (bw->enable_refdiv << 1) | (0 << 0);

        dib7000p_write_word(state, 900, clk_cfg0);

        /* P_pll_cfg */
        dib7000p_write_word(state, 903, (bw->pll_prediv << 5) | (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset);
        clk_cfg0 = (bw->pll_bypass << 15) | (clk_cfg0 & 0x7fff);
        dib7000p_write_word(state, 900, clk_cfg0);

        dib7000p_write_word(state, 18, (u16) (((bw->internal*1000) >> 16) & 0xffff));
        dib7000p_write_word(state, 19, (u16) ( (bw->internal*1000       ) & 0xffff));
        dib7000p_write_word(state, 21, (u16) ( (bw->ifreq          >> 16) & 0xffff));
        dib7000p_write_word(state, 22, (u16) ( (bw->ifreq               ) & 0xffff));

        dib7000p_write_word(state, 72, bw->sad_cfg);
}

static int dib7000p_reset_gpio(struct dib7000p_state *st)
{
        /* reset the GPIOs */
        dprintk( "gpio dir: %x: val: %x, pwm_pos: %x",st->gpio_dir, st->gpio_val,st->cfg.gpio_pwm_pos);

        dib7000p_write_word(st, 1029, st->gpio_dir);
        dib7000p_write_word(st, 1030, st->gpio_val);

        /* TODO 1031 is P_gpio_od */

        dib7000p_write_word(st, 1032, st->cfg.gpio_pwm_pos);

        dib7000p_write_word(st, 1037, st->cfg.pwm_freq_div);
        return 0;
}

static int dib7000p_cfg_gpio(struct dib7000p_state *st, u8 num, u8 dir, u8 val)
{
        st->gpio_dir = dib7000p_read_word(st, 1029);
        st->gpio_dir &= ~(1 << num);         /* reset the direction bit */
        st->gpio_dir |=  (dir & 0x1) << num; /* set the new direction */
        dib7000p_write_word(st, 1029, st->gpio_dir);

        st->gpio_val = dib7000p_read_word(st, 1030);
        st->gpio_val &= ~(1 << num);          /* reset the direction bit */
        st->gpio_val |=  (val & 0x01) << num; /* set the new value */
        dib7000p_write_word(st, 1030, st->gpio_val);

        return 0;
}

int dib7000p_set_gpio(struct dvb_frontend *demod, u8 num, u8 dir, u8 val)
{
        struct dib7000p_state *state = demod->demodulator_priv;
        return dib7000p_cfg_gpio(state, num, dir, val);
}

EXPORT_SYMBOL(dib7000p_set_gpio);
static u16 dib7000p_defaults[] =

{
        // auto search configuration
        3, 2,
                0x0004,
                0x1000,
                0x0814, /* Equal Lock */

        12, 6,
                0x001b,
                0x7740,
                0x005b,
                0x8d80,
                0x01c9,
                0xc380,
                0x0000,
                0x0080,
                0x0000,
                0x0090,
                0x0001,
                0xd4c0,

        1, 26,
                0x6680, // P_timf_alpha=6, P_corm_alpha=6, P_corm_thres=128 default: 6,4,26

        /* set ADC level to -16 */
        11, 79,
                (1 << 13) - 825 - 117,
                (1 << 13) - 837 - 117,
                (1 << 13) - 811 - 117,
                (1 << 13) - 766 - 117,
                (1 << 13) - 737 - 117,
                (1 << 13) - 693 - 117,
                (1 << 13) - 648 - 117,
                (1 << 13) - 619 - 117,
                (1 << 13) - 575 - 117,
                (1 << 13) - 531 - 117,
                (1 << 13) - 501 - 117,

        1, 142,
                0x0410, // P_palf_filter_on=1, P_palf_filter_freeze=0, P_palf_alpha_regul=16

        /* disable power smoothing */
        8, 145,
                0,
                0,
                0,
                0,
                0,
                0,
                0,
                0,

        1, 154,
                1 << 13, // P_fft_freq_dir=1, P_fft_nb_to_cut=0

        1, 168,
                0x0ccd, // P_pha3_thres, default 0x3000

//      1, 169,
//              0x0010, // P_cti_use_cpe=0, P_cti_use_prog=0, P_cti_win_len=16, default: 0x0010

        1, 183,
                0x200f, // P_cspu_regul=512, P_cspu_win_cut=15, default: 0x2005

        5, 187,
                0x023d, // P_adp_regul_cnt=573, default: 410
                0x00a4, // P_adp_noise_cnt=
                0x00a4, // P_adp_regul_ext
                0x7ff0, // P_adp_noise_ext
                0x3ccc, // P_adp_fil

        1, 198,
                0x800, // P_equal_thres_wgn

        1, 222,
                0x0010, // P_fec_ber_rs_len=2

        1, 235,
                0x0062, // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard

        2, 901,
                0x0006, // P_clk_cfg1
                (3 << 10) | (1 << 6), // P_divclksel=3 P_divbitsel=1

        1, 905,
                0x2c8e, // Tuner IO bank: max drive (14mA) + divout pads max drive

        0,
};

static int dib7000p_demod_reset(struct dib7000p_state *state)
{
        dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);

        dib7000p_set_adc_state(state, DIBX000_VBG_ENABLE);

        /* restart all parts */
        dib7000p_write_word(state,  770, 0xffff);
        dib7000p_write_word(state,  771, 0xffff);
        dib7000p_write_word(state,  772, 0x001f);
        dib7000p_write_word(state,  898, 0x0003);
        /* except i2c, sdio, gpio - control interfaces */
        dib7000p_write_word(state, 1280, 0x01fc - ((1 << 7) | (1 << 6) | (1 << 5)) );

        dib7000p_write_word(state,  770, 0);
        dib7000p_write_word(state,  771, 0);
        dib7000p_write_word(state,  772, 0);
        dib7000p_write_word(state,  898, 0);
        dib7000p_write_word(state, 1280, 0);

        /* default */
        dib7000p_reset_pll(state);

        if (dib7000p_reset_gpio(state) != 0)
                dprintk( "GPIO reset was not successful.");

        if (dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
                dprintk( "OUTPUT_MODE could not be reset.");

        /* unforce divstr regardless whether i2c enumeration was done or not */
        dib7000p_write_word(state, 1285, dib7000p_read_word(state, 1285) & ~(1 << 1) );

        dib7000p_set_bandwidth(state, 8000);

        dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON);
        dib7000p_sad_calib(state);
        dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_OFF);

        // P_iqc_alpha_pha, P_iqc_alpha_amp_dcc_alpha, ...
        if(state->cfg.tuner_is_baseband)
                dib7000p_write_word(state, 36,0x0755);
        else
                dib7000p_write_word(state, 36,0x1f55);

        dib7000p_write_tab(state, dib7000p_defaults);

        dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY);


        return 0;
}

static void dib7000p_pll_clk_cfg(struct dib7000p_state *state)
{
        u16 tmp = 0;
        tmp = dib7000p_read_word(state, 903);
        dib7000p_write_word(state, 903, (tmp | 0x1));   //pwr-up pll
        tmp = dib7000p_read_word(state, 900);
        dib7000p_write_word(state, 900, (tmp & 0x7fff) | (1 << 6));     //use High freq clock
}

static void dib7000p_restart_agc(struct dib7000p_state *state)
{
        // P_restart_iqc & P_restart_agc
        dib7000p_write_word(state, 770, (1 << 11) | (1 << 9));
        dib7000p_write_word(state, 770, 0x0000);
}

static int dib7000p_update_lna(struct dib7000p_state *state)
{
        u16 dyn_gain;

        // when there is no LNA to program return immediatly
        if (state->cfg.update_lna) {
                // read dyn_gain here (because it is demod-dependent and not fe)
                dyn_gain = dib7000p_read_word(state, 394);
                if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed
                        dib7000p_restart_agc(state);
                        return 1;
                }
        }

        return 0;
}

static int dib7000p_set_agc_config(struct dib7000p_state *state, u8 band)
{
        struct dibx000_agc_config *agc = NULL;
        int i;
        if (state->current_band == band && state->current_agc != NULL)
                return 0;
        state->current_band = band;

        for (i = 0; i < state->cfg.agc_config_count; i++)
                if (state->cfg.agc[i].band_caps & band) {
                        agc = &state->cfg.agc[i];
                        break;
                }

        if (agc == NULL) {
                dprintk( "no valid AGC configuration found for band 0x%02x",band);
                return -EINVAL;
        }

        state->current_agc = agc;

        /* AGC */
        dib7000p_write_word(state, 75 ,  agc->setup );
        dib7000p_write_word(state, 76 ,  agc->inv_gain );
        dib7000p_write_word(state, 77 ,  agc->time_stabiliz );
        dib7000p_write_word(state, 100, (agc->alpha_level << 12) | agc->thlock);

        // Demod AGC loop configuration
        dib7000p_write_word(state, 101, (agc->alpha_mant << 5) | agc->alpha_exp);
        dib7000p_write_word(state, 102, (agc->beta_mant << 6)  | agc->beta_exp);

        /* AGC continued */
        dprintk( "WBD: ref: %d, sel: %d, active: %d, alpha: %d",
                state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);

        if (state->wbd_ref != 0)
                dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | state->wbd_ref);
        else
                dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | agc->wbd_ref);

        dib7000p_write_word(state, 106, (agc->wbd_sel << 13) | (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8));

        dib7000p_write_word(state, 107,  agc->agc1_max);
        dib7000p_write_word(state, 108,  agc->agc1_min);
        dib7000p_write_word(state, 109,  agc->agc2_max);
        dib7000p_write_word(state, 110,  agc->agc2_min);
        dib7000p_write_word(state, 111, (agc->agc1_pt1    << 8) | agc->agc1_pt2);
        dib7000p_write_word(state, 112,  agc->agc1_pt3);
        dib7000p_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
        dib7000p_write_word(state, 114, (agc->agc2_pt1    << 8) | agc->agc2_pt2);
        dib7000p_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
        return 0;
}

static int dib7000p_agc_startup(struct dvb_frontend *demod, struct dvb_frontend_parameters *ch)
{
        struct dib7000p_state *state = demod->demodulator_priv;
        int ret = -1;
        u8 *agc_state = &state->agc_state;
        u8 agc_split;

        switch (state->agc_state) {
                case 0:
                        // set power-up level: interf+analog+AGC
                        dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
                        dib7000p_set_adc_state(state, DIBX000_ADC_ON);
                        dib7000p_pll_clk_cfg(state);

                        if (dib7000p_set_agc_config(state, BAND_OF_FREQUENCY(ch->frequency/1000)) != 0)
                                return -1;

                        ret = 7;
                        (*agc_state)++;
                        break;

                case 1:
                        // AGC initialization
                        if (state->cfg.agc_control)
                                state->cfg.agc_control(&state->demod, 1);

                        dib7000p_write_word(state, 78, 32768);
                        if (!state->current_agc->perform_agc_softsplit) {
                                /* we are using the wbd - so slow AGC startup */
                                /* force 0 split on WBD and restart AGC */
                                dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (state->current_agc->wbd_alpha << 9) | (1 << 8));
                                (*agc_state)++;
                                ret = 5;
                        } else {
                                /* default AGC startup */
                                (*agc_state) = 4;
                                /* wait AGC rough lock time */
                                ret = 7;
                        }

                        dib7000p_restart_agc(state);
                        break;

                case 2: /* fast split search path after 5sec */
                        dib7000p_write_word(state,  75, state->current_agc->setup | (1 << 4)); /* freeze AGC loop */
                        dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (2 << 9) | (0 << 8)); /* fast split search 0.25kHz */
                        (*agc_state)++;
                        ret = 14;
                        break;

        case 3: /* split search ended */
                        agc_split = (u8)dib7000p_read_word(state, 396); /* store the split value for the next time */
                        dib7000p_write_word(state, 78, dib7000p_read_word(state, 394)); /* set AGC gain start value */

                        dib7000p_write_word(state, 75,  state->current_agc->setup);   /* std AGC loop */
                        dib7000p_write_word(state, 106, (state->current_agc->wbd_sel << 13) | (state->current_agc->wbd_alpha << 9) | agc_split); /* standard split search */

                        dib7000p_restart_agc(state);

                        dprintk( "SPLIT %p: %hd", demod, agc_split);

                        (*agc_state)++;
                        ret = 5;
                        break;

                case 4: /* LNA startup */
                        // wait AGC accurate lock time
                        ret = 7;

                        if (dib7000p_update_lna(state))
                                // wait only AGC rough lock time
                                ret = 5;
                        else // nothing was done, go to the next state
                                (*agc_state)++;
                        break;

                case 5:
                        if (state->cfg.agc_control)
                                state->cfg.agc_control(&state->demod, 0);
                        (*agc_state)++;
                        break;
                default:
                        break;
        }
        return ret;
}

static void dib7000p_update_timf(struct dib7000p_state *state)
{
        u32 timf = (dib7000p_read_word(state, 427) << 16) | dib7000p_read_word(state, 428);
        state->timf = timf * 160 / (state->current_bandwidth / 50);
        dib7000p_write_word(state, 23, (u16) (timf >> 16));
        dib7000p_write_word(state, 24, (u16) (timf & 0xffff));
        dprintk( "updated timf_frequency: %d (default: %d)",state->timf, state->cfg.bw->timf);

}

static void dib7000p_set_channel(struct dib7000p_state *state, struct dvb_frontend_parameters *ch, u8 seq)
{
        u16 value, est[4];

    dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth));

        /* nfft, guard, qam, alpha */
        value = 0;
        switch (ch->u.ofdm.transmission_mode) {
                case TRANSMISSION_MODE_2K: value |= (0 << 7); break;
                case /* 4K MODE */ 255: value |= (2 << 7); break;
                default:
                case TRANSMISSION_MODE_8K: value |= (1 << 7); break;
        }
        switch (ch->u.ofdm.guard_interval) {
                case GUARD_INTERVAL_1_32: value |= (0 << 5); break;
                case GUARD_INTERVAL_1_16: value |= (1 << 5); break;
                case GUARD_INTERVAL_1_4:  value |= (3 << 5); break;
                default:
                case GUARD_INTERVAL_1_8:  value |= (2 << 5); break;
        }
        switch (ch->u.ofdm.constellation) {
                case QPSK:  value |= (0 << 3); break;
                case QAM_16: value |= (1 << 3); break;
                default:
                case QAM_64: value |= (2 << 3); break;
        }
        switch (HIERARCHY_1) {
                case HIERARCHY_2: value |= 2; break;
                case HIERARCHY_4: value |= 4; break;
                default:
                case HIERARCHY_1: value |= 1; break;
        }
        dib7000p_write_word(state, 0, value);
        dib7000p_write_word(state, 5, (seq << 4) | 1); /* do not force tps, search list 0 */

        /* P_dintl_native, P_dintlv_inv, P_hrch, P_code_rate, P_select_hp */
        value = 0;
        if (1 != 0)
                value |= (1 << 6);
        if (ch->u.ofdm.hierarchy_information == 1)
                value |= (1 << 4);
        if (1 == 1)
                value |= 1;
        switch ((ch->u.ofdm.hierarchy_information == 0 || 1 == 1) ? ch->u.ofdm.code_rate_HP : ch->u.ofdm.code_rate_LP) {
                case FEC_2_3: value |= (2 << 1); break;
                case FEC_3_4: value |= (3 << 1); break;
                case FEC_5_6: value |= (5 << 1); break;
                case FEC_7_8: value |= (7 << 1); break;
                default:
                case FEC_1_2: value |= (1 << 1); break;
        }
        dib7000p_write_word(state, 208, value);

        /* offset loop parameters */
        dib7000p_write_word(state, 26, 0x6680); // timf(6xxx)
        dib7000p_write_word(state, 32, 0x0003); // pha_off_max(xxx3)
        dib7000p_write_word(state, 29, 0x1273); // isi
        dib7000p_write_word(state, 33, 0x0005); // sfreq(xxx5)

        /* P_dvsy_sync_wait */
        switch (ch->u.ofdm.transmission_mode) {
                case TRANSMISSION_MODE_8K: value = 256; break;
                case /* 4K MODE */ 255: value = 128; break;
                case TRANSMISSION_MODE_2K:
                default: value = 64; break;
        }
        switch (ch->u.ofdm.guard_interval) {
                case GUARD_INTERVAL_1_16: value *= 2; break;
                case GUARD_INTERVAL_1_8:  value *= 4; break;
                case GUARD_INTERVAL_1_4:  value *= 8; break;
                default:
                case GUARD_INTERVAL_1_32: value *= 1; break;
        }
        if (state->cfg.diversity_delay == 0)
                state->div_sync_wait = (value * 3) / 2 + 48; // add 50% SFN margin + compensate for one DVSY-fifo
        else
                state->div_sync_wait = (value * 3) / 2 + state->cfg.diversity_delay; // add 50% SFN margin + compensate for one DVSY-fifo

        /* deactive the possibility of diversity reception if extended interleaver */
        state->div_force_off = !1 && ch->u.ofdm.transmission_mode != TRANSMISSION_MODE_8K;
        dib7000p_set_diversity_in(&state->demod, state->div_state);

        /* channel estimation fine configuration */
        switch (ch->u.ofdm.constellation) {
                case QAM_64:
                        est[0] = 0x0148;       /* P_adp_regul_cnt 0.04 */
                        est[1] = 0xfff0;       /* P_adp_noise_cnt -0.002 */
                        est[2] = 0x00a4;       /* P_adp_regul_ext 0.02 */
                        est[3] = 0xfff8;       /* P_adp_noise_ext -0.001 */
                        break;
                case QAM_16:
                        est[0] = 0x023d;       /* P_adp_regul_cnt 0.07 */
                        est[1] = 0xffdf;       /* P_adp_noise_cnt -0.004 */
                        est[2] = 0x00a4;       /* P_adp_regul_ext 0.02 */
                        est[3] = 0xfff0;       /* P_adp_noise_ext -0.002 */
                        break;
                default:
                        est[0] = 0x099a;       /* P_adp_regul_cnt 0.3 */
                        est[1] = 0xffae;       /* P_adp_noise_cnt -0.01 */
                        est[2] = 0x0333;       /* P_adp_regul_ext 0.1 */
                        est[3] = 0xfff8;       /* P_adp_noise_ext -0.002 */
                        break;
        }
        for (value = 0; value < 4; value++)
                dib7000p_write_word(state, 187 + value, est[value]);
}

static int dib7000p_autosearch_start(struct dvb_frontend *demod, struct dvb_frontend_parameters *ch)
{
        struct dib7000p_state *state = demod->demodulator_priv;
        struct dvb_frontend_parameters schan;
        u32 value, factor;

        schan = *ch;
        schan.u.ofdm.constellation = QAM_64;
        schan.u.ofdm.guard_interval         = GUARD_INTERVAL_1_32;
        schan.u.ofdm.transmission_mode          = TRANSMISSION_MODE_8K;
        schan.u.ofdm.code_rate_HP  = FEC_2_3;
        schan.u.ofdm.code_rate_LP  = FEC_3_4;
        schan.u.ofdm.hierarchy_information          = 0;

        dib7000p_set_channel(state, &schan, 7);

        factor = BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth);
        if (factor >= 5000)
                factor = 1;
        else
                factor = 6;

        // always use the setting for 8MHz here lock_time for 7,6 MHz are longer
        value = 30 * state->cfg.bw->internal * factor;
        dib7000p_write_word(state, 6,  (u16) ((value >> 16) & 0xffff)); // lock0 wait time
        dib7000p_write_word(state, 7,  (u16)  (value        & 0xffff)); // lock0 wait time
        value = 100 * state->cfg.bw->internal * factor;
        dib7000p_write_word(state, 8,  (u16) ((value >> 16) & 0xffff)); // lock1 wait time
        dib7000p_write_word(state, 9,  (u16)  (value        & 0xffff)); // lock1 wait time
        value = 500 * state->cfg.bw->internal * factor;
        dib7000p_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time
        dib7000p_write_word(state, 11, (u16)  (value        & 0xffff)); // lock2 wait time

        value = dib7000p_read_word(state, 0);
        dib7000p_write_word(state, 0, (u16) ((1 << 9) | value));
        dib7000p_read_word(state, 1284);
        dib7000p_write_word(state, 0, (u16) value);

        return 0;
}

static int dib7000p_autosearch_is_irq(struct dvb_frontend *demod)
{
        struct dib7000p_state *state = demod->demodulator_priv;
        u16 irq_pending = dib7000p_read_word(state, 1284);

        if (irq_pending & 0x1) // failed
                return 1;

        if (irq_pending & 0x2) // succeeded
                return 2;

        return 0; // still pending
}

static void dib7000p_spur_protect(struct dib7000p_state *state, u32 rf_khz, u32 bw)
{
        static s16 notch[]={16143, 14402, 12238, 9713, 6902, 3888, 759, -2392};
        static u8 sine [] ={0, 2, 3, 5, 6, 8, 9, 11, 13, 14, 16, 17, 19, 20, 22,
        24, 25, 27, 28, 30, 31, 33, 34, 36, 38, 39, 41, 42, 44, 45, 47, 48, 50, 51,
        53, 55, 56, 58, 59, 61, 62, 64, 65, 67, 68, 70, 71, 73, 74, 76, 77, 79, 80,
        82, 83, 85, 86, 88, 89, 91, 92, 94, 95, 97, 98, 99, 101, 102, 104, 105,
        107, 108, 109, 111, 112, 114, 115, 117, 118, 119, 121, 122, 123, 125, 126,
        128, 129, 130, 132, 133, 134, 136, 137, 138, 140, 141, 142, 144, 145, 146,
        147, 149, 150, 151, 152, 154, 155, 156, 157, 159, 160, 161, 162, 164, 165,
        166, 167, 168, 170, 171, 172, 173, 174, 175, 177, 178, 179, 180, 181, 182,
        183, 184, 185, 186, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198,
        199, 200, 201, 202, 203, 204, 205, 206, 207, 207, 208, 209, 210, 211, 212,
        213, 214, 215, 215, 216, 217, 218, 219, 220, 220, 221, 222, 223, 224, 224,
        225, 226, 227, 227, 228, 229, 229, 230, 231, 231, 232, 233, 233, 234, 235,
        235, 236, 237, 237, 238, 238, 239, 239, 240, 241, 241, 242, 242, 243, 243,
        244, 244, 245, 245, 245, 246, 246, 247, 247, 248, 248, 248, 249, 249, 249,
        250, 250, 250, 251, 251, 251, 252, 252, 252, 252, 253, 253, 253, 253, 254,
        254, 254, 254, 254, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
        255, 255, 255, 255, 255, 255};

        u32 xtal = state->cfg.bw->xtal_hz / 1000;
        int f_rel = DIV_ROUND_CLOSEST(rf_khz, xtal) * xtal - rf_khz;
        int k;
        int coef_re[8],coef_im[8];
        int bw_khz = bw;
        u32 pha;

        dprintk( "relative position of the Spur: %dk (RF: %dk, XTAL: %dk)", f_rel, rf_khz, xtal);


        if (f_rel < -bw_khz/2 || f_rel > bw_khz/2)
                return;

        bw_khz /= 100;

        dib7000p_write_word(state, 142 ,0x0610);

        for (k = 0; k < 8; k++) {
                pha = ((f_rel * (k+1) * 112 * 80/bw_khz) /1000) & 0x3ff;

                if (pha==0) {
                        coef_re[k] = 256;
                        coef_im[k] = 0;
                } else if(pha < 256) {
                        coef_re[k] = sine[256-(pha&0xff)];
                        coef_im[k] = sine[pha&0xff];
                } else if (pha == 256) {
                        coef_re[k] = 0;
                        coef_im[k] = 256;
                } else if (pha < 512) {
                        coef_re[k] = -sine[pha&0xff];
                        coef_im[k] = sine[256 - (pha&0xff)];
                } else if (pha == 512) {
                        coef_re[k] = -256;
                        coef_im[k] = 0;
                } else if (pha < 768) {
                        coef_re[k] = -sine[256-(pha&0xff)];
                        coef_im[k] = -sine[pha&0xff];
                } else if (pha == 768) {
                        coef_re[k] = 0;
                        coef_im[k] = -256;
                } else {
                        coef_re[k] = sine[pha&0xff];
                        coef_im[k] = -sine[256 - (pha&0xff)];
                }

                coef_re[k] *= notch[k];
                coef_re[k] += (1<<14);
                if (coef_re[k] >= (1<<24))
                        coef_re[k]  = (1<<24) - 1;
                coef_re[k] /= (1<<15);

                coef_im[k] *= notch[k];
                coef_im[k] += (1<<14);
                if (coef_im[k] >= (1<<24))
                        coef_im[k]  = (1<<24)-1;
                coef_im[k] /= (1<<15);

                dprintk( "PALF COEF: %d re: %d im: %d", k, coef_re[k], coef_im[k]);

                dib7000p_write_word(state, 143, (0 << 14) | (k << 10) | (coef_re[k] & 0x3ff));
                dib7000p_write_word(state, 144, coef_im[k] & 0x3ff);
                dib7000p_write_word(state, 143, (1 << 14) | (k << 10) | (coef_re[k] & 0x3ff));
        }
        dib7000p_write_word(state,143 ,0);
}

static int dib7000p_tune(struct dvb_frontend *demod, struct dvb_frontend_parameters *ch)
{
        struct dib7000p_state *state = demod->demodulator_priv;
        u16 tmp = 0;

        if (ch != NULL)
                dib7000p_set_channel(state, ch, 0);
        else
                return -EINVAL;

        // restart demod
        dib7000p_write_word(state, 770, 0x4000);
        dib7000p_write_word(state, 770, 0x0000);
        msleep(45);

        /* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
        tmp = (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3);
        if (state->sfn_workaround_active) {
                dprintk( "SFN workaround is active");
                tmp |= (1 << 9);
                dib7000p_write_word(state, 166, 0x4000); // P_pha3_force_pha_shift
        } else {
                dib7000p_write_word(state, 166, 0x0000); // P_pha3_force_pha_shift
        }
        dib7000p_write_word(state, 29, tmp);

        // never achieved a lock with that bandwidth so far - wait for osc-freq to update
        if (state->timf == 0)
                msleep(200);

        /* offset loop parameters */

        /* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */
        tmp = (6 << 8) | 0x80;
        switch (ch->u.ofdm.transmission_mode) {
                case TRANSMISSION_MODE_2K: tmp |= (7 << 12); break;
                case /* 4K MODE */ 255: tmp |= (8 << 12); break;
                default:
                case TRANSMISSION_MODE_8K: tmp |= (9 << 12); break;
        }
        dib7000p_write_word(state, 26, tmp);  /* timf_a(6xxx) */

        /* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */
        tmp = (0 << 4);
        switch (ch->u.ofdm.transmission_mode) {
                case TRANSMISSION_MODE_2K: tmp |= 0x6; break;
                case /* 4K MODE */ 255: tmp |= 0x7; break;
                default:
                case TRANSMISSION_MODE_8K: tmp |= 0x8; break;
        }
        dib7000p_write_word(state, 32,  tmp);

        /* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */
        tmp = (0 << 4);
        switch (ch->u.ofdm.transmission_mode) {
                case TRANSMISSION_MODE_2K: tmp |= 0x6; break;
                case /* 4K MODE */ 255: tmp |= 0x7; break;
                default:
                case TRANSMISSION_MODE_8K: tmp |= 0x8; break;
        }
        dib7000p_write_word(state, 33,  tmp);

        tmp = dib7000p_read_word(state,509);
        if (!((tmp >> 6) & 0x1)) {
                /* restart the fec */
                tmp = dib7000p_read_word(state,771);
                dib7000p_write_word(state, 771, tmp | (1 << 1));
                dib7000p_write_word(state, 771, tmp);
                msleep(10);
                tmp = dib7000p_read_word(state,509);
        }

        // we achieved a lock - it's time to update the osc freq
        if ((tmp >> 6) & 0x1)
                dib7000p_update_timf(state);

        if (state->cfg.spur_protect)
                dib7000p_spur_protect(state, ch->frequency/1000, BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth));

    dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth));
        return 0;
}

static int dib7000p_wakeup(struct dvb_frontend *demod)
{
        struct dib7000p_state *state = demod->demodulator_priv;
        dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
        dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON);
        return 0;
}

static int dib7000p_sleep(struct dvb_frontend *demod)
{
        struct dib7000p_state *state = demod->demodulator_priv;
        return dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) | dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY);
}

static int dib7000p_identify(struct dib7000p_state *st)
{
        u16 value;
        dprintk( "checking demod on I2C address: %d (%x)",
                st->i2c_addr, st->i2c_addr);

        if ((value = dib7000p_read_word(st, 768)) != 0x01b3) {
                dprintk( "wrong Vendor ID (read=0x%x)",value);
                return -EREMOTEIO;
        }

        if ((value = dib7000p_read_word(st, 769)) != 0x4000) {
                dprintk( "wrong Device ID (%x)",value);
                return -EREMOTEIO;
        }

        return 0;
}


static int dib7000p_get_frontend(struct dvb_frontend* fe,
                                struct dvb_frontend_parameters *fep)
{
        struct dib7000p_state *state = fe->demodulator_priv;
        u16 tps = dib7000p_read_word(state,463);

        fep->inversion = INVERSION_AUTO;

        fep->u.ofdm.bandwidth = BANDWIDTH_TO_INDEX(state->current_bandwidth);

        switch ((tps >> 8) & 0x3) {
                case 0: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; break;
                case 1: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; break;
                /* case 2: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_4K; break; */
        }

        switch (tps & 0x3) {
                case 0: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; break;
                case 1: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; break;
                case 2: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; break;
                case 3: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; break;
        }

        switch ((tps >> 14) & 0x3) {
                case 0: fep->u.ofdm.constellation = QPSK; break;
                case 1: fep->u.ofdm.constellation = QAM_16; break;
                case 2:
                default: fep->u.ofdm.constellation = QAM_64; break;
        }

        /* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */
        /* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */

        fep->u.ofdm.hierarchy_information = HIERARCHY_NONE;
        switch ((tps >> 5) & 0x7) {
                case 1: fep->u.ofdm.code_rate_HP = FEC_1_2; break;
                case 2: fep->u.ofdm.code_rate_HP = FEC_2_3; break;
                case 3: fep->u.ofdm.code_rate_HP = FEC_3_4; break;
                case 5: fep->u.ofdm.code_rate_HP = FEC_5_6; break;
                case 7:
                default: fep->u.ofdm.code_rate_HP = FEC_7_8; break;

        }

        switch ((tps >> 2) & 0x7) {
                case 1: fep->u.ofdm.code_rate_LP = FEC_1_2; break;
                case 2: fep->u.ofdm.code_rate_LP = FEC_2_3; break;
                case 3: fep->u.ofdm.code_rate_LP = FEC_3_4; break;
                case 5: fep->u.ofdm.code_rate_LP = FEC_5_6; break;
                case 7:
                default: fep->u.ofdm.code_rate_LP = FEC_7_8; break;
        }

        /* native interleaver: (dib7000p_read_word(state, 464) >>  5) & 0x1 */

        return 0;
}

static int dib7000p_set_frontend(struct dvb_frontend* fe,
                                struct dvb_frontend_parameters *fep)
{
        struct dib7000p_state *state = fe->demodulator_priv;
        int time, ret;

        dib7000p_set_output_mode(state, OUTMODE_HIGH_Z);

    /* maybe the parameter has been changed */
        state->sfn_workaround_active = buggy_sfn_workaround;

        if (fe->ops.tuner_ops.set_params)
                fe->ops.tuner_ops.set_params(fe, fep);

        /* start up the AGC */
        state->agc_state = 0;
        do {
                time = dib7000p_agc_startup(fe, fep);
                if (time != -1)
                        msleep(time);
        } while (time != -1);

        if (fep->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ||
                fep->u.ofdm.guard_interval    == GUARD_INTERVAL_AUTO ||
                fep->u.ofdm.constellation     == QAM_AUTO ||
                fep->u.ofdm.code_rate_HP      == FEC_AUTO) {
                int i = 800, found;

                dib7000p_autosearch_start(fe, fep);
                do {
                        msleep(1);
                        found = dib7000p_autosearch_is_irq(fe);
                } while (found == 0 && i--);

                dprintk("autosearch returns: %d",found);
                if (found == 0 || found == 1)
                        return 0; // no channel found

                dib7000p_get_frontend(fe, fep);
        }

        ret = dib7000p_tune(fe, fep);

        /* make this a config parameter */
        dib7000p_set_output_mode(state, state->cfg.output_mode);
    return ret;
}

static int dib7000p_read_status(struct dvb_frontend *fe, fe_status_t *stat)
{
        struct dib7000p_state *state = fe->demodulator_priv;
        u16 lock = dib7000p_read_word(state, 509);

        *stat = 0;

        if (lock & 0x8000)
                *stat |= FE_HAS_SIGNAL;
        if (lock & 0x3000)
                *stat |= FE_HAS_CARRIER;
        if (lock & 0x0100)
                *stat |= FE_HAS_VITERBI;
        if (lock & 0x0010)
                *stat |= FE_HAS_SYNC;
    if ((lock & 0x0038) == 0x38)
                *stat |= FE_HAS_LOCK;

        return 0;
}

static int dib7000p_read_ber(struct dvb_frontend *fe, u32 *ber)
{
        struct dib7000p_state *state = fe->demodulator_priv;
        *ber = (dib7000p_read_word(state, 500) << 16) | dib7000p_read_word(state, 501);
        return 0;
}

static int dib7000p_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
{
        struct dib7000p_state *state = fe->demodulator_priv;
        *unc = dib7000p_read_word(state, 506);
        return 0;
}

static int dib7000p_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
{
        struct dib7000p_state *state = fe->demodulator_priv;
        u16 val = dib7000p_read_word(state, 394);
        *strength = 65535 - val;
        return 0;
}

static int dib7000p_read_snr(struct dvb_frontend* fe, u16 *snr)
{
        struct dib7000p_state *state = fe->demodulator_priv;
        u16 val;
        s32 signal_mant, signal_exp, noise_mant, noise_exp;
        u32 result = 0;

        val = dib7000p_read_word(state, 479);
        noise_mant = (val >> 4) & 0xff;
        noise_exp = ((val & 0xf) << 2);
        val = dib7000p_read_word(state, 480);
        noise_exp += ((val >> 14) & 0x3);
        if ((noise_exp & 0x20) != 0)
                noise_exp -= 0x40;

        signal_mant = (val >> 6) & 0xFF;
        signal_exp  = (val & 0x3F);
        if ((signal_exp & 0x20) != 0)
                signal_exp -= 0x40;

        if (signal_mant != 0)
                result = intlog10(2) * 10 * signal_exp + 10 *
                        intlog10(signal_mant);
        else
                result = intlog10(2) * 10 * signal_exp - 100;

        if (noise_mant != 0)
                result -= intlog10(2) * 10 * noise_exp + 10 *
                        intlog10(noise_mant);
        else
                result -= intlog10(2) * 10 * noise_exp - 100;

        *snr = result / ((1 << 24) / 10);
        return 0;
}

static int dib7000p_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
{
        tune->min_delay_ms = 1000;
        return 0;
}

static void dib7000p_release(struct dvb_frontend *demod)
{
        struct dib7000p_state *st = demod->demodulator_priv;
        dibx000_exit_i2c_master(&st->i2c_master);
        kfree(st);
}

int dib7000pc_detection(struct i2c_adapter *i2c_adap)
{
        u8 tx[2], rx[2];
        struct i2c_msg msg[2] = {
                { .addr = 18 >> 1, .flags = 0,        .buf = tx, .len = 2 },
                { .addr = 18 >> 1, .flags = I2C_M_RD, .buf = rx, .len = 2 },
        };

        tx[0] = 0x03;
        tx[1] = 0x00;

        if (i2c_transfer(i2c_adap, msg, 2) == 2)
                if (rx[0] == 0x01 && rx[1] == 0xb3) {
                        dprintk("-D-  DiB7000PC detected");
                        return 1;
                }

        msg[0].addr = msg[1].addr = 0x40;

        if (i2c_transfer(i2c_adap, msg, 2) == 2)
                if (rx[0] == 0x01 && rx[1] == 0xb3) {
                        dprintk("-D-  DiB7000PC detected");
                        return 1;
                }

        dprintk("-D-  DiB7000PC not detected");
        return 0;
}
EXPORT_SYMBOL(dib7000pc_detection);

struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating)
{
        struct dib7000p_state *st = demod->demodulator_priv;
        return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
}
EXPORT_SYMBOL(dib7000p_get_i2c_master);

int dib7000p_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff)
{
    struct dib7000p_state *state = fe->demodulator_priv;
    u16 val = dib7000p_read_word(state, 235) & 0xffef;
    val |= (onoff & 0x1) << 4;
    dprintk("PID filter enabled %d", onoff);
    return dib7000p_write_word(state, 235, val);
}
EXPORT_SYMBOL(dib7000p_pid_filter_ctrl);

int dib7000p_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
{
    struct dib7000p_state *state = fe->demodulator_priv;
    dprintk("PID filter: index %x, PID %d, OnOff %d", id, pid, onoff);
    return dib7000p_write_word(state, 241 + id, onoff ? (1 << 13) | pid : 0);
}
EXPORT_SYMBOL(dib7000p_pid_filter);

int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[])
{
        struct dib7000p_state *dpst;
        int k = 0;
        u8 new_addr = 0;

        dpst = kzalloc(sizeof(struct dib7000p_state), GFP_KERNEL);
        if (!dpst)
                return -ENOMEM;

        dpst->i2c_adap = i2c;

        for (k = no_of_demods-1; k >= 0; k--) {
                dpst->cfg = cfg[k];

                /* designated i2c address */
                new_addr          = (0x40 + k) << 1;
                dpst->i2c_addr = new_addr;
                dib7000p_write_word(dpst, 1287, 0x0003); /* sram lead in, rdy */
                if (dib7000p_identify(dpst) != 0) {
                        dpst->i2c_addr = default_addr;
                        dib7000p_write_word(dpst, 1287, 0x0003); /* sram lead in, rdy */
                        if (dib7000p_identify(dpst) != 0) {
                                dprintk("DiB7000P #%d: not identified\n", k);
                                kfree(dpst);
                                return -EIO;
                        }
                }

                /* start diversity to pull_down div_str - just for i2c-enumeration */
                dib7000p_set_output_mode(dpst, OUTMODE_DIVERSITY);

                /* set new i2c address and force divstart */
                dib7000p_write_word(dpst, 1285, (new_addr << 2) | 0x2);

                dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr);
        }

        for (k = 0; k < no_of_demods; k++) {
                dpst->cfg = cfg[k];
                dpst->i2c_addr = (0x40 + k) << 1;

                // unforce divstr
                dib7000p_write_word(dpst, 1285, dpst->i2c_addr << 2);

                /* deactivate div - it was just for i2c-enumeration */
                dib7000p_set_output_mode(dpst, OUTMODE_HIGH_Z);
        }

        kfree(dpst);
        return 0;
}
EXPORT_SYMBOL(dib7000p_i2c_enumeration);

static struct dvb_frontend_ops dib7000p_ops;
struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg)
{
        struct dvb_frontend *demod;
        struct dib7000p_state *st;
        st = kzalloc(sizeof(struct dib7000p_state), GFP_KERNEL);
        if (st == NULL)
                return NULL;

        memcpy(&st->cfg, cfg, sizeof(struct dib7000p_config));
        st->i2c_adap = i2c_adap;
        st->i2c_addr = i2c_addr;
        st->gpio_val = cfg->gpio_val;
        st->gpio_dir = cfg->gpio_dir;

        /* Ensure the output mode remains at the previous default if it's
         * not specifically set by the caller.
         */
        if ((st->cfg.output_mode != OUTMODE_MPEG2_SERIAL) &&
            (st->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK))
                st->cfg.output_mode = OUTMODE_MPEG2_FIFO;

        demod                   = &st->demod;
        demod->demodulator_priv = st;
        memcpy(&st->demod.ops, &dib7000p_ops, sizeof(struct dvb_frontend_ops));

    dib7000p_write_word(st, 1287, 0x0003); /* sram lead in, rdy */

        if (dib7000p_identify(st) != 0)
                goto error;

        /* FIXME: make sure the dev.parent field is initialized, or else
        request_firmware() will hit an OOPS (this should be moved somewhere
        more common) */
        st->i2c_master.gated_tuner_i2c_adap.dev.parent = i2c_adap->dev.parent;

        dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr);

        dib7000p_demod_reset(st);

        return demod;

error:
        kfree(st);
        return NULL;
}
EXPORT_SYMBOL(dib7000p_attach);

static struct dvb_frontend_ops dib7000p_ops = {
        .info = {
                .name = "DiBcom 7000PC",
                .type = FE_OFDM,
                .frequency_min      = 44250000,
                .frequency_max      = 867250000,
                .frequency_stepsize = 62500,
                .caps = FE_CAN_INVERSION_AUTO |
                        FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
                        FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
                        FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
                        FE_CAN_TRANSMISSION_MODE_AUTO |
                        FE_CAN_GUARD_INTERVAL_AUTO |
                        FE_CAN_RECOVER |
                        FE_CAN_HIERARCHY_AUTO,
        },

        .release              = dib7000p_release,

        .init                 = dib7000p_wakeup,
        .sleep                = dib7000p_sleep,

        .set_frontend         = dib7000p_set_frontend,
        .get_tune_settings    = dib7000p_fe_get_tune_settings,
        .get_frontend         = dib7000p_get_frontend,

        .read_status          = dib7000p_read_status,
        .read_ber             = dib7000p_read_ber,
        .read_signal_strength = dib7000p_read_signal_strength,
        .read_snr             = dib7000p_read_snr,
        .read_ucblocks        = dib7000p_read_unc_blocks,
};

MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
MODULE_DESCRIPTION("Driver for the DiBcom 7000PC COFDM demodulator");
MODULE_LICENSE("GPL");