drivers/usb/host/uhci-hub.c

   1 /*
   2  * Universal Host Controller Interface driver for USB.
   3  *
   4  * Maintainer: Alan Stern <stern@rowland.harvard.edu>
   5  *
   6  * (C) Copyright 1999 Linus Torvalds
   7  * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
   8  * (C) Copyright 1999 Randy Dunlap
   9  * (C) Copyright 1999 Georg Acher, acher@in.tum.de
  10  * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
  11  * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
  12  * (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu
  13  */
  14
  15 static __u8 root_hub_hub_des[] =
  16 {
  17         0x09,                   /*  __u8  bLength; */
  18         0x29,                   /*  __u8  bDescriptorType; Hub-descriptor */
  19         0x02,                   /*  __u8  bNbrPorts; */
  20         0x0a,                   /* __u16  wHubCharacteristics; */
  21         0x00,                   /*   (per-port OC, no power switching) */
  22         0x01,                   /*  __u8  bPwrOn2pwrGood; 2ms */
  23         0x00,                   /*  __u8  bHubContrCurrent; 0 mA */
  24         0x00,                   /*  __u8  DeviceRemovable; *** 7 Ports max *** */
  25         0xff                    /*  __u8  PortPwrCtrlMask; *** 7 ports max *** */
  26 };
  27
  28 #define UHCI_RH_MAXCHILD        7
  29
  30 /* must write as zeroes */
  31 #define WZ_BITS         (USBPORTSC_RES2 | USBPORTSC_RES3 | USBPORTSC_RES4)
  32
  33 /* status change bits:  nonzero writes will clear */
  34 #define RWC_BITS        (USBPORTSC_OCC | USBPORTSC_PEC | USBPORTSC_CSC)
  35
  36 /* A port that either is connected or has a changed-bit set will prevent
  37  * us from AUTO_STOPPING.
  38  */
  39 static int any_ports_active(struct uhci_hcd *uhci)
  40 {
  41         int port;
  42
  43         for (port = 0; port < uhci->rh_numports; ++port) {
  44                 if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) &
  45                                 (USBPORTSC_CCS | RWC_BITS)) ||
  46                                 test_bit(port, &uhci->port_c_suspend))
  47                         return 1;
  48         }
  49         return 0;
  50 }
  51
  52 static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf)
  53 {
  54         int port;
  55
  56         *buf = 0;
  57         for (port = 0; port < uhci->rh_numports; ++port) {
  58                 if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & RWC_BITS) ||
  59                                 test_bit(port, &uhci->port_c_suspend))
  60                         *buf |= (1 << (port + 1));
  61         }
  62         return !!*buf;
  63 }
  64
  65 #define OK(x)                   len = (x); break
  66
  67 #define CLR_RH_PORTSTAT(x) \
  68         status = inw(port_addr); \
  69         status &= ~(RWC_BITS|WZ_BITS); \
  70         status &= ~(x); \
  71         status |= RWC_BITS & (x); \
  72         outw(status, port_addr)
  73
  74 #define SET_RH_PORTSTAT(x) \
  75         status = inw(port_addr); \
  76         status |= (x); \
  77         status &= ~(RWC_BITS|WZ_BITS); \
  78         outw(status, port_addr)
  79
  80 /* UHCI controllers don't automatically stop resume signalling after 20 msec,
  81  * so we have to poll and check timeouts in order to take care of it.
  82  */
  83 static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
  84                 unsigned long port_addr)
  85 {
  86         int status;
  87         int i;
  88
  89         if (inw(port_addr) & (USBPORTSC_SUSP | USBPORTSC_RD)) {
  90                 CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD);
  91                 if (test_bit(port, &uhci->resuming_ports))
  92                         set_bit(port, &uhci->port_c_suspend);
  93
  94                 /* The controller won't actually turn off the RD bit until
  95                  * it has had a chance to send a low-speed EOP sequence,
  96                  * which is supposed to take 3 bit times (= 2 microseconds).
  97                  * Experiments show that some controllers take longer, so
  98                  * we'll poll for completion. */
  99                 for (i = 0; i < 10; ++i) {
 100                         if (!(inw(port_addr) & USBPORTSC_RD))
 101                                 break;
 102                         udelay(1);
 103                 }
 104         }
 105         clear_bit(port, &uhci->resuming_ports);
 106 }
 107
 108 /* Wait for the UHCI controller in HP's iLO2 server management chip.
 109  * It can take up to 250 us to finish a reset and set the CSC bit.
 110  */
 111 static void wait_for_HP(unsigned long port_addr)
 112 {
 113         int i;
 114
 115         for (i = 10; i < 250; i += 10) {
 116                 if (inw(port_addr) & USBPORTSC_CSC)
 117                         return;
 118                 udelay(10);
 119         }
 120         /* Log a warning? */
 121 }
 122
 123 static void uhci_check_ports(struct uhci_hcd *uhci)
 124 {
 125         unsigned int port;
 126         unsigned long port_addr;
 127         int status;
 128
 129         for (port = 0; port < uhci->rh_numports; ++port) {
 130                 port_addr = uhci->io_addr + USBPORTSC1 + 2 * port;
 131                 status = inw(port_addr);
 132                 if (unlikely(status & USBPORTSC_PR)) {
 133                         if (time_after_eq(jiffies, uhci->ports_timeout)) {
 134                                 CLR_RH_PORTSTAT(USBPORTSC_PR);
 135                                 udelay(10);
 136
 137                                 /* HP's server management chip requires
 138                                  * a longer delay. */
 139                                 if (to_pci_dev(uhci_dev(uhci))->vendor ==
 140                                                 PCI_VENDOR_ID_HP)
 141                                         wait_for_HP(port_addr);
 142
 143                                 /* If the port was enabled before, turning
 144                                  * reset on caused a port enable change.
 145                                  * Turning reset off causes a port connect
 146                                  * status change.  Clear these changes. */
 147                                 CLR_RH_PORTSTAT(USBPORTSC_CSC | USBPORTSC_PEC);
 148                                 SET_RH_PORTSTAT(USBPORTSC_PE);
 149                         }
 150                 }
 151                 if (unlikely(status & USBPORTSC_RD)) {
 152                         if (!test_bit(port, &uhci->resuming_ports)) {
 153
 154                                 /* Port received a wakeup request */
 155                                 set_bit(port, &uhci->resuming_ports);
 156                                 uhci->ports_timeout = jiffies +
 157                                                 msecs_to_jiffies(20);
 158
 159                                 /* Make sure we see the port again
 160                                  * after the resuming period is over. */
 161                                 mod_timer(&uhci_to_hcd(uhci)->rh_timer,
 162                                                 uhci->ports_timeout);
 163                         } else if (time_after_eq(jiffies,
 164                                                 uhci->ports_timeout)) {
 165                                 uhci_finish_suspend(uhci, port, port_addr);
 166                         }
 167                 }
 168         }
 169 }
 170
 171 static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 172 {
 173         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 174         unsigned long flags;
 175         int status = 0;
 176
 177         spin_lock_irqsave(&uhci->lock, flags);
 178
 179         uhci_scan_schedule(uhci);
 180         if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
 181                 goto done;
 182         uhci_check_ports(uhci);
 183
 184         status = get_hub_status_data(uhci, buf);
 185
 186         switch (uhci->rh_state) {
 187             case UHCI_RH_SUSPENDING:
 188             case UHCI_RH_SUSPENDED:
 189                 /* if port change, ask to be resumed */
 190                 if (status)
 191                         usb_hcd_resume_root_hub(hcd);
 192                 break;
 193
 194             case UHCI_RH_AUTO_STOPPED:
 195                 /* if port change, auto start */
 196                 if (status)
 197                         wakeup_rh(uhci);
 198                 break;
 199
 200             case UHCI_RH_RUNNING:
 201                 /* are any devices attached? */
 202                 if (!any_ports_active(uhci)) {
 203                         uhci->rh_state = UHCI_RH_RUNNING_NODEVS;
 204                         uhci->auto_stop_time = jiffies + HZ;
 205                 }
 206                 break;
 207
 208             case UHCI_RH_RUNNING_NODEVS:
 209                 /* auto-stop if nothing connected for 1 second */
 210                 if (any_ports_active(uhci))
 211                         uhci->rh_state = UHCI_RH_RUNNING;
 212                 else if (time_after_eq(jiffies, uhci->auto_stop_time))
 213                         suspend_rh(uhci, UHCI_RH_AUTO_STOPPED);
 214                 break;
 215
 216             default:
 217                 break;
 218         }
 219
 220 done:
 221         spin_unlock_irqrestore(&uhci->lock, flags);
 222         return status;
 223 }
 224
 225 /* size of returned buffer is part of USB spec */
 226 static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 227                         u16 wIndex, char *buf, u16 wLength)
 228 {
 229         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 230         int status, lstatus, retval = 0, len = 0;
 231         unsigned int port = wIndex - 1;
 232         unsigned long port_addr = uhci->io_addr + USBPORTSC1 + 2 * port;
 233         u16 wPortChange, wPortStatus;
 234         unsigned long flags;
 235
 236         if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
 237                 return -ETIMEDOUT;
 238
 239         spin_lock_irqsave(&uhci->lock, flags);
 240         switch (typeReq) {
 241
 242         case GetHubStatus:
 243                 *(__le32 *)buf = cpu_to_le32(0);
 244                 OK(4);          /* hub power */
 245         case GetPortStatus:
 246                 if (port >= uhci->rh_numports)
 247                         goto err;
 248
 249                 uhci_check_ports(uhci);
 250                 status = inw(port_addr);
 251
 252                 /* Intel controllers report the OverCurrent bit active on.
 253                  * VIA controllers report it active off, so we'll adjust the
 254                  * bit value.  (It's not standardized in the UHCI spec.)
 255                  */
 256                 if (to_pci_dev(hcd->self.controller)->vendor ==
 257                                 PCI_VENDOR_ID_VIA)
 258                         status ^= USBPORTSC_OC;
 259
 260                 /* UHCI doesn't support C_RESET (always false) */
 261                 wPortChange = lstatus = 0;
 262                 if (status & USBPORTSC_CSC)
 263                         wPortChange |= USB_PORT_STAT_C_CONNECTION;
 264                 if (status & USBPORTSC_PEC)
 265                         wPortChange |= USB_PORT_STAT_C_ENABLE;
 266                 if (status & USBPORTSC_OCC)
 267                         wPortChange |= USB_PORT_STAT_C_OVERCURRENT;
 268
 269                 if (test_bit(port, &uhci->port_c_suspend)) {
 270                         wPortChange |= USB_PORT_STAT_C_SUSPEND;
 271                         lstatus |= 1;
 272                 }
 273                 if (test_bit(port, &uhci->resuming_ports))
 274                         lstatus |= 4;
 275
 276                 /* UHCI has no power switching (always on) */
 277                 wPortStatus = USB_PORT_STAT_POWER;
 278                 if (status & USBPORTSC_CCS)
 279                         wPortStatus |= USB_PORT_STAT_CONNECTION;
 280                 if (status & USBPORTSC_PE) {
 281                         wPortStatus |= USB_PORT_STAT_ENABLE;
 282                         if (status & (USBPORTSC_SUSP | USBPORTSC_RD))
 283                                 wPortStatus |= USB_PORT_STAT_SUSPEND;
 284                 }
 285                 if (status & USBPORTSC_OC)
 286                         wPortStatus |= USB_PORT_STAT_OVERCURRENT;
 287                 if (status & USBPORTSC_PR)
 288                         wPortStatus |= USB_PORT_STAT_RESET;
 289                 if (status & USBPORTSC_LSDA)
 290                         wPortStatus |= USB_PORT_STAT_LOW_SPEED;
 291
 292                 if (wPortChange)
 293                         dev_dbg(uhci_dev(uhci), "port %d portsc %04x,%02x\n",
 294                                         wIndex, status, lstatus);
 295
 296                 *(__le16 *)buf = cpu_to_le16(wPortStatus);
 297                 *(__le16 *)(buf + 2) = cpu_to_le16(wPortChange);
 298                 OK(4);
 299         case SetHubFeature:             /* We don't implement these */
 300         case ClearHubFeature:
 301                 switch (wValue) {
 302                 case C_HUB_OVER_CURRENT:
 303                 case C_HUB_LOCAL_POWER:
 304                         OK(0);
 305                 default:
 306                         goto err;
 307                 }
 308                 break;
 309         case SetPortFeature:
 310                 if (port >= uhci->rh_numports)
 311                         goto err;
 312
 313                 switch (wValue) {
 314                 case USB_PORT_FEAT_SUSPEND:
 315                         SET_RH_PORTSTAT(USBPORTSC_SUSP);
 316                         OK(0);
 317                 case USB_PORT_FEAT_RESET:
 318                         SET_RH_PORTSTAT(USBPORTSC_PR);
 319
 320                         /* Reset terminates Resume signalling */
 321                         uhci_finish_suspend(uhci, port, port_addr);
 322
 323                         /* USB v2.0 7.1.7.5 */
 324                         uhci->ports_timeout = jiffies + msecs_to_jiffies(50);
 325                         OK(0);
 326                 case USB_PORT_FEAT_POWER:
 327                         /* UHCI has no power switching */
 328                         OK(0);
 329                 default:
 330                         goto err;
 331                 }
 332                 break;
 333         case ClearPortFeature:
 334                 if (port >= uhci->rh_numports)
 335                         goto err;
 336
 337                 switch (wValue) {
 338                 case USB_PORT_FEAT_ENABLE:
 339                         CLR_RH_PORTSTAT(USBPORTSC_PE);
 340
 341                         /* Disable terminates Resume signalling */
 342                         uhci_finish_suspend(uhci, port, port_addr);
 343                         OK(0);
 344                 case USB_PORT_FEAT_C_ENABLE:
 345                         CLR_RH_PORTSTAT(USBPORTSC_PEC);
 346                         OK(0);
 347                 case USB_PORT_FEAT_SUSPEND:
 348                         if (!(inw(port_addr) & USBPORTSC_SUSP)) {
 349
 350                                 /* Make certain the port isn't suspended */
 351                                 uhci_finish_suspend(uhci, port, port_addr);
 352                         } else if (!test_and_set_bit(port,
 353                                                 &uhci->resuming_ports)) {
 354                                 SET_RH_PORTSTAT(USBPORTSC_RD);
 355
 356                                 /* The controller won't allow RD to be set
 357                                  * if the port is disabled.  When this happens
 358                                  * just skip the Resume signalling.
 359                                  */
 360                                 if (!(inw(port_addr) & USBPORTSC_RD))
 361                                         uhci_finish_suspend(uhci, port,
 362                                                         port_addr);
 363                                 else
 364                                         /* USB v2.0 7.1.7.7 */
 365                                         uhci->ports_timeout = jiffies +
 366                                                 msecs_to_jiffies(20);
 367                         }
 368                         OK(0);
 369                 case USB_PORT_FEAT_C_SUSPEND:
 370                         clear_bit(port, &uhci->port_c_suspend);
 371                         OK(0);
 372                 case USB_PORT_FEAT_POWER:
 373                         /* UHCI has no power switching */
 374                         goto err;
 375                 case USB_PORT_FEAT_C_CONNECTION:
 376                         CLR_RH_PORTSTAT(USBPORTSC_CSC);
 377                         OK(0);
 378                 case USB_PORT_FEAT_C_OVER_CURRENT:
 379                         CLR_RH_PORTSTAT(USBPORTSC_OCC);
 380                         OK(0);
 381                 case USB_PORT_FEAT_C_RESET:
 382                         /* this driver won't report these */
 383                         OK(0);
 384                 default:
 385                         goto err;
 386                 }
 387                 break;
 388         case GetHubDescriptor:
 389                 len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength);
 390                 memcpy(buf, root_hub_hub_des, len);
 391                 if (len > 2)
 392                         buf[2] = uhci->rh_numports;
 393                 OK(len);
 394         default:
 395 err:
 396                 retval = -EPIPE;
 397         }
 398         spin_unlock_irqrestore(&uhci->lock, flags);
 399
 400         return retval;
 401 }