ath6kl: Remove unused eeprom.c
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / mips / ar7 / platform.c
blob7d2fab392327003311ac282483e99f0a398d2e4f
1 /*
2 * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
3 * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
20 #include <linux/init.h>
21 #include <linux/types.h>
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/dma-mapping.h>
25 #include <linux/platform_device.h>
26 #include <linux/mtd/physmap.h>
27 #include <linux/serial.h>
28 #include <linux/serial_8250.h>
29 #include <linux/ioport.h>
30 #include <linux/io.h>
31 #include <linux/vlynq.h>
32 #include <linux/leds.h>
33 #include <linux/string.h>
34 #include <linux/etherdevice.h>
35 #include <linux/phy.h>
36 #include <linux/phy_fixed.h>
37 #include <linux/gpio.h>
38 #include <linux/clk.h>
40 #include <asm/addrspace.h>
41 #include <asm/mach-ar7/ar7.h>
42 #include <asm/mach-ar7/gpio.h>
43 #include <asm/mach-ar7/prom.h>
45 /*****************************************************************************
46 * VLYNQ Bus
47 ****************************************************************************/
48 struct plat_vlynq_data {
49 struct plat_vlynq_ops ops;
50 int gpio_bit;
51 int reset_bit;
54 static int vlynq_on(struct vlynq_device *dev)
56 int ret;
57 struct plat_vlynq_data *pdata = dev->dev.platform_data;
59 ret = gpio_request(pdata->gpio_bit, "vlynq");
60 if (ret)
61 goto out;
63 ar7_device_reset(pdata->reset_bit);
65 ret = ar7_gpio_disable(pdata->gpio_bit);
66 if (ret)
67 goto out_enabled;
69 ret = ar7_gpio_enable(pdata->gpio_bit);
70 if (ret)
71 goto out_enabled;
73 ret = gpio_direction_output(pdata->gpio_bit, 0);
74 if (ret)
75 goto out_gpio_enabled;
77 msleep(50);
79 gpio_set_value(pdata->gpio_bit, 1);
81 msleep(50);
83 return 0;
85 out_gpio_enabled:
86 ar7_gpio_disable(pdata->gpio_bit);
87 out_enabled:
88 ar7_device_disable(pdata->reset_bit);
89 gpio_free(pdata->gpio_bit);
90 out:
91 return ret;
94 static void vlynq_off(struct vlynq_device *dev)
96 struct plat_vlynq_data *pdata = dev->dev.platform_data;
98 ar7_gpio_disable(pdata->gpio_bit);
99 gpio_free(pdata->gpio_bit);
100 ar7_device_disable(pdata->reset_bit);
103 static struct resource vlynq_low_res[] = {
105 .name = "regs",
106 .flags = IORESOURCE_MEM,
107 .start = AR7_REGS_VLYNQ0,
108 .end = AR7_REGS_VLYNQ0 + 0xff,
111 .name = "irq",
112 .flags = IORESOURCE_IRQ,
113 .start = 29,
114 .end = 29,
117 .name = "mem",
118 .flags = IORESOURCE_MEM,
119 .start = 0x04000000,
120 .end = 0x04ffffff,
123 .name = "devirq",
124 .flags = IORESOURCE_IRQ,
125 .start = 80,
126 .end = 111,
130 static struct resource vlynq_high_res[] = {
132 .name = "regs",
133 .flags = IORESOURCE_MEM,
134 .start = AR7_REGS_VLYNQ1,
135 .end = AR7_REGS_VLYNQ1 + 0xff,
138 .name = "irq",
139 .flags = IORESOURCE_IRQ,
140 .start = 33,
141 .end = 33,
144 .name = "mem",
145 .flags = IORESOURCE_MEM,
146 .start = 0x0c000000,
147 .end = 0x0cffffff,
150 .name = "devirq",
151 .flags = IORESOURCE_IRQ,
152 .start = 112,
153 .end = 143,
157 static struct plat_vlynq_data vlynq_low_data = {
158 .ops = {
159 .on = vlynq_on,
160 .off = vlynq_off,
162 .reset_bit = 20,
163 .gpio_bit = 18,
166 static struct plat_vlynq_data vlynq_high_data = {
167 .ops = {
168 .on = vlynq_on,
169 .off = vlynq_off,
171 .reset_bit = 16,
172 .gpio_bit = 19,
175 static struct platform_device vlynq_low = {
176 .id = 0,
177 .name = "vlynq",
178 .dev = {
179 .platform_data = &vlynq_low_data,
181 .resource = vlynq_low_res,
182 .num_resources = ARRAY_SIZE(vlynq_low_res),
185 static struct platform_device vlynq_high = {
186 .id = 1,
187 .name = "vlynq",
188 .dev = {
189 .platform_data = &vlynq_high_data,
191 .resource = vlynq_high_res,
192 .num_resources = ARRAY_SIZE(vlynq_high_res),
195 /*****************************************************************************
196 * Flash
197 ****************************************************************************/
198 static struct resource physmap_flash_resource = {
199 .name = "mem",
200 .flags = IORESOURCE_MEM,
201 .start = 0x10000000,
202 .end = 0x107fffff,
205 static struct physmap_flash_data physmap_flash_data = {
206 .width = 2,
209 static struct platform_device physmap_flash = {
210 .name = "physmap-flash",
211 .dev = {
212 .platform_data = &physmap_flash_data,
214 .resource = &physmap_flash_resource,
215 .num_resources = 1,
218 /*****************************************************************************
219 * Ethernet
220 ****************************************************************************/
221 static struct resource cpmac_low_res[] = {
223 .name = "regs",
224 .flags = IORESOURCE_MEM,
225 .start = AR7_REGS_MAC0,
226 .end = AR7_REGS_MAC0 + 0x7ff,
229 .name = "irq",
230 .flags = IORESOURCE_IRQ,
231 .start = 27,
232 .end = 27,
236 static struct resource cpmac_high_res[] = {
238 .name = "regs",
239 .flags = IORESOURCE_MEM,
240 .start = AR7_REGS_MAC1,
241 .end = AR7_REGS_MAC1 + 0x7ff,
244 .name = "irq",
245 .flags = IORESOURCE_IRQ,
246 .start = 41,
247 .end = 41,
251 static struct fixed_phy_status fixed_phy_status __initdata = {
252 .link = 1,
253 .speed = 100,
254 .duplex = 1,
257 static struct plat_cpmac_data cpmac_low_data = {
258 .reset_bit = 17,
259 .power_bit = 20,
260 .phy_mask = 0x80000000,
263 static struct plat_cpmac_data cpmac_high_data = {
264 .reset_bit = 21,
265 .power_bit = 22,
266 .phy_mask = 0x7fffffff,
269 static u64 cpmac_dma_mask = DMA_BIT_MASK(32);
271 static struct platform_device cpmac_low = {
272 .id = 0,
273 .name = "cpmac",
274 .dev = {
275 .dma_mask = &cpmac_dma_mask,
276 .coherent_dma_mask = DMA_BIT_MASK(32),
277 .platform_data = &cpmac_low_data,
279 .resource = cpmac_low_res,
280 .num_resources = ARRAY_SIZE(cpmac_low_res),
283 static struct platform_device cpmac_high = {
284 .id = 1,
285 .name = "cpmac",
286 .dev = {
287 .dma_mask = &cpmac_dma_mask,
288 .coherent_dma_mask = DMA_BIT_MASK(32),
289 .platform_data = &cpmac_high_data,
291 .resource = cpmac_high_res,
292 .num_resources = ARRAY_SIZE(cpmac_high_res),
295 static void __init cpmac_get_mac(int instance, unsigned char *dev_addr)
297 char name[5], *mac;
299 sprintf(name, "mac%c", 'a' + instance);
300 mac = prom_getenv(name);
301 if (!mac && instance) {
302 sprintf(name, "mac%c", 'a');
303 mac = prom_getenv(name);
306 if (mac) {
307 if (sscanf(mac, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
308 &dev_addr[0], &dev_addr[1],
309 &dev_addr[2], &dev_addr[3],
310 &dev_addr[4], &dev_addr[5]) != 6) {
311 pr_warning("cannot parse mac address, "
312 "using random address\n");
313 random_ether_addr(dev_addr);
315 } else
316 random_ether_addr(dev_addr);
319 /*****************************************************************************
320 * USB
321 ****************************************************************************/
322 static struct resource usb_res[] = {
324 .name = "regs",
325 .flags = IORESOURCE_MEM,
326 .start = AR7_REGS_USB,
327 .end = AR7_REGS_USB + 0xff,
330 .name = "irq",
331 .flags = IORESOURCE_IRQ,
332 .start = 32,
333 .end = 32,
336 .name = "mem",
337 .flags = IORESOURCE_MEM,
338 .start = 0x03400000,
339 .end = 0x03401fff,
343 static struct platform_device ar7_udc = {
344 .name = "ar7_udc",
345 .resource = usb_res,
346 .num_resources = ARRAY_SIZE(usb_res),
349 /*****************************************************************************
350 * LEDs
351 ****************************************************************************/
352 static struct gpio_led default_leds[] = {
354 .name = "status",
355 .gpio = 8,
356 .active_low = 1,
360 static struct gpio_led titan_leds[] = {
361 { .name = "status", .gpio = 8, .active_low = 1, },
362 { .name = "wifi", .gpio = 13, .active_low = 1, },
365 static struct gpio_led dsl502t_leds[] = {
367 .name = "status",
368 .gpio = 9,
369 .active_low = 1,
372 .name = "ethernet",
373 .gpio = 7,
374 .active_low = 1,
377 .name = "usb",
378 .gpio = 12,
379 .active_low = 1,
383 static struct gpio_led dg834g_leds[] = {
385 .name = "ppp",
386 .gpio = 6,
387 .active_low = 1,
390 .name = "status",
391 .gpio = 7,
392 .active_low = 1,
395 .name = "adsl",
396 .gpio = 8,
397 .active_low = 1,
400 .name = "wifi",
401 .gpio = 12,
402 .active_low = 1,
405 .name = "power",
406 .gpio = 14,
407 .active_low = 1,
408 .default_trigger = "default-on",
412 static struct gpio_led fb_sl_leds[] = {
414 .name = "1",
415 .gpio = 7,
418 .name = "2",
419 .gpio = 13,
420 .active_low = 1,
423 .name = "3",
424 .gpio = 10,
425 .active_low = 1,
428 .name = "4",
429 .gpio = 12,
430 .active_low = 1,
433 .name = "5",
434 .gpio = 9,
435 .active_low = 1,
439 static struct gpio_led fb_fon_leds[] = {
441 .name = "1",
442 .gpio = 8,
445 .name = "2",
446 .gpio = 3,
447 .active_low = 1,
450 .name = "3",
451 .gpio = 5,
454 .name = "4",
455 .gpio = 4,
456 .active_low = 1,
459 .name = "5",
460 .gpio = 11,
461 .active_low = 1,
465 static struct gpio_led_platform_data ar7_led_data;
467 static struct platform_device ar7_gpio_leds = {
468 .name = "leds-gpio",
469 .dev = {
470 .platform_data = &ar7_led_data,
474 static void __init detect_leds(void)
476 char *prid, *usb_prod;
478 /* Default LEDs */
479 ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
480 ar7_led_data.leds = default_leds;
482 /* FIXME: the whole thing is unreliable */
483 prid = prom_getenv("ProductID");
484 usb_prod = prom_getenv("usb_prod");
486 /* If we can't get the product id from PROM, use the default LEDs */
487 if (!prid)
488 return;
490 if (strstr(prid, "Fritz_Box_FON")) {
491 ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds);
492 ar7_led_data.leds = fb_fon_leds;
493 } else if (strstr(prid, "Fritz_Box_")) {
494 ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds);
495 ar7_led_data.leds = fb_sl_leds;
496 } else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB"))
497 && usb_prod != NULL && strstr(usb_prod, "DSL-502T")) {
498 ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds);
499 ar7_led_data.leds = dsl502t_leds;
500 } else if (strstr(prid, "DG834")) {
501 ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
502 ar7_led_data.leds = dg834g_leds;
503 } else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) {
504 ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
505 ar7_led_data.leds = titan_leds;
509 /*****************************************************************************
510 * Watchdog
511 ****************************************************************************/
512 static struct resource ar7_wdt_res = {
513 .name = "regs",
514 .flags = IORESOURCE_MEM,
515 .start = -1, /* Filled at runtime */
516 .end = -1, /* Filled at runtime */
519 static struct platform_device ar7_wdt = {
520 .name = "ar7_wdt",
521 .resource = &ar7_wdt_res,
522 .num_resources = 1,
525 /*****************************************************************************
526 * Init
527 ****************************************************************************/
528 static int __init ar7_register_uarts(void)
530 #ifdef CONFIG_SERIAL_8250
531 static struct uart_port uart_port __initdata;
532 struct clk *bus_clk;
533 int res;
535 memset(&uart_port, 0, sizeof(struct uart_port));
537 bus_clk = clk_get(NULL, "bus");
538 if (IS_ERR(bus_clk))
539 panic("unable to get bus clk\n");
541 uart_port.type = PORT_AR7;
542 uart_port.uartclk = clk_get_rate(bus_clk) / 2;
543 uart_port.iotype = UPIO_MEM32;
544 uart_port.regshift = 2;
546 uart_port.line = 0;
547 uart_port.irq = AR7_IRQ_UART0;
548 uart_port.mapbase = AR7_REGS_UART0;
549 uart_port.membase = ioremap(uart_port.mapbase, 256);
551 res = early_serial_setup(&uart_port);
552 if (res)
553 return res;
555 /* Only TNETD73xx have a second serial port */
556 if (ar7_has_second_uart()) {
557 uart_port.line = 1;
558 uart_port.irq = AR7_IRQ_UART1;
559 uart_port.mapbase = UR8_REGS_UART1;
560 uart_port.membase = ioremap(uart_port.mapbase, 256);
562 res = early_serial_setup(&uart_port);
563 if (res)
564 return res;
566 #endif
568 return 0;
571 static void __init titan_fixup_devices(void)
573 /* Set vlynq0 data */
574 vlynq_low_data.reset_bit = 15;
575 vlynq_low_data.gpio_bit = 14;
577 /* Set vlynq1 data */
578 vlynq_high_data.reset_bit = 16;
579 vlynq_high_data.gpio_bit = 7;
581 /* Set vlynq0 resources */
582 vlynq_low_res[0].start = TITAN_REGS_VLYNQ0;
583 vlynq_low_res[0].end = TITAN_REGS_VLYNQ0 + 0xff;
584 vlynq_low_res[1].start = 33;
585 vlynq_low_res[1].end = 33;
586 vlynq_low_res[2].start = 0x0c000000;
587 vlynq_low_res[2].end = 0x0fffffff;
588 vlynq_low_res[3].start = 80;
589 vlynq_low_res[3].end = 111;
591 /* Set vlynq1 resources */
592 vlynq_high_res[0].start = TITAN_REGS_VLYNQ1;
593 vlynq_high_res[0].end = TITAN_REGS_VLYNQ1 + 0xff;
594 vlynq_high_res[1].start = 34;
595 vlynq_high_res[1].end = 34;
596 vlynq_high_res[2].start = 0x40000000;
597 vlynq_high_res[2].end = 0x43ffffff;
598 vlynq_high_res[3].start = 112;
599 vlynq_high_res[3].end = 143;
601 /* Set cpmac0 data */
602 cpmac_low_data.phy_mask = 0x40000000;
604 /* Set cpmac1 data */
605 cpmac_high_data.phy_mask = 0x80000000;
607 /* Set cpmac0 resources */
608 cpmac_low_res[0].start = TITAN_REGS_MAC0;
609 cpmac_low_res[0].end = TITAN_REGS_MAC0 + 0x7ff;
611 /* Set cpmac1 resources */
612 cpmac_high_res[0].start = TITAN_REGS_MAC1;
613 cpmac_high_res[0].end = TITAN_REGS_MAC1 + 0x7ff;
616 static int __init ar7_register_devices(void)
618 void __iomem *bootcr;
619 u32 val;
620 int res;
622 res = ar7_register_uarts();
623 if (res)
624 pr_err("unable to setup uart(s): %d\n", res);
626 res = platform_device_register(&physmap_flash);
627 if (res)
628 pr_warning("unable to register physmap-flash: %d\n", res);
630 if (ar7_is_titan())
631 titan_fixup_devices();
633 ar7_device_disable(vlynq_low_data.reset_bit);
634 res = platform_device_register(&vlynq_low);
635 if (res)
636 pr_warning("unable to register vlynq-low: %d\n", res);
638 if (ar7_has_high_vlynq()) {
639 ar7_device_disable(vlynq_high_data.reset_bit);
640 res = platform_device_register(&vlynq_high);
641 if (res)
642 pr_warning("unable to register vlynq-high: %d\n", res);
645 if (ar7_has_high_cpmac()) {
646 res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
647 if (!res) {
648 cpmac_get_mac(1, cpmac_high_data.dev_addr);
650 res = platform_device_register(&cpmac_high);
651 if (res)
652 pr_warning("unable to register cpmac-high: %d\n", res);
653 } else
654 pr_warning("unable to add cpmac-high phy: %d\n", res);
655 } else
656 cpmac_low_data.phy_mask = 0xffffffff;
658 res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
659 if (!res) {
660 cpmac_get_mac(0, cpmac_low_data.dev_addr);
661 res = platform_device_register(&cpmac_low);
662 if (res)
663 pr_warning("unable to register cpmac-low: %d\n", res);
664 } else
665 pr_warning("unable to add cpmac-low phy: %d\n", res);
667 detect_leds();
668 res = platform_device_register(&ar7_gpio_leds);
669 if (res)
670 pr_warning("unable to register leds: %d\n", res);
672 res = platform_device_register(&ar7_udc);
673 if (res)
674 pr_warning("unable to register usb slave: %d\n", res);
676 /* Register watchdog only if enabled in hardware */
677 bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
678 val = readl(bootcr);
679 iounmap(bootcr);
680 if (val & AR7_WDT_HW_ENA) {
681 if (ar7_has_high_vlynq())
682 ar7_wdt_res.start = UR8_REGS_WDT;
683 else
684 ar7_wdt_res.start = AR7_REGS_WDT;
686 ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
687 res = platform_device_register(&ar7_wdt);
688 if (res)
689 pr_warning("unable to register watchdog: %d\n", res);
692 return 0;
694 device_initcall(ar7_register_devices);