arch/arm/mach-omap2/opp2xxx.h

   1 /*
   2  * opp2xxx.h - macros for old-style OMAP2xxx "OPP" definitions
   3  *
   4  * Copyright (C) 2005-2009 Texas Instruments, Inc.
   5  * Copyright (C) 2004-2009 Nokia Corporation
   6  *
   7  * Richard Woodruff <r-woodruff2@ti.com>
   8  *
   9  * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
  10  * These configurations are characterized by voltage and speed for clocks.
  11  * The device is only validated for certain combinations. One way to express
  12  * these combinations is via the 'ratio's' which the clocks operate with
  13  * respect to each other. These ratio sets are for a given voltage/DPLL
  14  * setting. All configurations can be described by a DPLL setting and a ratio
  15  * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
  16  *
  17  * 2430 differs from 2420 in that there are no more phase synchronizers used.
  18  * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
  19  * 2430 (iva2.1, NOdsp, mdm)
  20  *
  21  * XXX Missing voltage data.
  22  *
  23  * THe format described in this file is deprecated.  Once a reasonable
  24  * OPP API exists, the data in this file should be converted to use it.
  25  *
  26  * This is technically part of the OMAP2xxx clock code.
  27  */
  28
  29 #ifndef __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
  30 #define __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
  31
  32 /**
  33  * struct prcm_config - define clock rates on a per-OPP basis (24xx)
  34  *
  35  * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
  36  * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
  37  * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
  38  *
  39  * This is deprecated.  As soon as we have a decent OPP API, we should
  40  * move all this stuff to it.
  41  */
  42 struct prcm_config {
  43         unsigned long xtal_speed;       /* crystal rate */
  44         unsigned long dpll_speed;       /* dpll: out*xtal*M/(N-1)table_recalc */
  45         unsigned long mpu_speed;        /* speed of MPU */
  46         unsigned long cm_clksel_mpu;    /* mpu divider */
  47         unsigned long cm_clksel_dsp;    /* dsp+iva1 div(2420), iva2.1(2430) */
  48         unsigned long cm_clksel_gfx;    /* gfx dividers */
  49         unsigned long cm_clksel1_core;  /* major subsystem dividers */
  50         unsigned long cm_clksel1_pll;   /* m,n */
  51         unsigned long cm_clksel2_pll;   /* dpllx1 or x2 out */
  52         unsigned long cm_clksel_mdm;    /* modem dividers 2430 only */
  53         unsigned long base_sdrc_rfr;    /* base refresh timing for a set */
  54         unsigned char flags;
  55 };
  56
  57
  58 /* Core fields for cm_clksel, not ratio governed */
  59 #define RX_CLKSEL_DSS1                  (0x10 << 8)
  60 #define RX_CLKSEL_DSS2                  (0x0 << 13)
  61 #define RX_CLKSEL_SSI                   (0x5 << 20)
  62
  63 /*-------------------------------------------------------------------------
  64  * Voltage/DPLL ratios
  65  *-------------------------------------------------------------------------*/
  66
  67 /* 2430 Ratio's, 2430-Ratio Config 1 */
  68 #define R1_CLKSEL_L3                    (4 << 0)
  69 #define R1_CLKSEL_L4                    (2 << 5)
  70 #define R1_CLKSEL_USB                   (4 << 25)
  71 #define R1_CM_CLKSEL1_CORE_VAL          (R1_CLKSEL_USB | RX_CLKSEL_SSI | \
  72                                          RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
  73                                          R1_CLKSEL_L4 | R1_CLKSEL_L3)
  74 #define R1_CLKSEL_MPU                   (2 << 0)
  75 #define R1_CM_CLKSEL_MPU_VAL            R1_CLKSEL_MPU
  76 #define R1_CLKSEL_DSP                   (2 << 0)
  77 #define R1_CLKSEL_DSP_IF                (2 << 5)
  78 #define R1_CM_CLKSEL_DSP_VAL            (R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF)
  79 #define R1_CLKSEL_GFX                   (2 << 0)
  80 #define R1_CM_CLKSEL_GFX_VAL            R1_CLKSEL_GFX
  81 #define R1_CLKSEL_MDM                   (4 << 0)
  82 #define R1_CM_CLKSEL_MDM_VAL            R1_CLKSEL_MDM
  83
  84 /* 2430-Ratio Config 2 */
  85 #define R2_CLKSEL_L3                    (6 << 0)
  86 #define R2_CLKSEL_L4                    (2 << 5)
  87 #define R2_CLKSEL_USB                   (2 << 25)
  88 #define R2_CM_CLKSEL1_CORE_VAL          (R2_CLKSEL_USB | RX_CLKSEL_SSI | \
  89                                          RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
  90                                          R2_CLKSEL_L4 | R2_CLKSEL_L3)
  91 #define R2_CLKSEL_MPU                   (2 << 0)
  92 #define R2_CM_CLKSEL_MPU_VAL            R2_CLKSEL_MPU
  93 #define R2_CLKSEL_DSP                   (2 << 0)
  94 #define R2_CLKSEL_DSP_IF                (3 << 5)
  95 #define R2_CM_CLKSEL_DSP_VAL            (R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF)
  96 #define R2_CLKSEL_GFX                   (2 << 0)
  97 #define R2_CM_CLKSEL_GFX_VAL            R2_CLKSEL_GFX
  98 #define R2_CLKSEL_MDM                   (6 << 0)
  99 #define R2_CM_CLKSEL_MDM_VAL            R2_CLKSEL_MDM
 100
 101 /* 2430-Ratio Bootm (BYPASS) */
 102 #define RB_CLKSEL_L3                    (1 << 0)
 103 #define RB_CLKSEL_L4                    (1 << 5)
 104 #define RB_CLKSEL_USB                   (1 << 25)
 105 #define RB_CM_CLKSEL1_CORE_VAL          (RB_CLKSEL_USB | RX_CLKSEL_SSI | \
 106                                          RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
 107                                          RB_CLKSEL_L4 | RB_CLKSEL_L3)
 108 #define RB_CLKSEL_MPU                   (1 << 0)
 109 #define RB_CM_CLKSEL_MPU_VAL            RB_CLKSEL_MPU
 110 #define RB_CLKSEL_DSP                   (1 << 0)
 111 #define RB_CLKSEL_DSP_IF                (1 << 5)
 112 #define RB_CM_CLKSEL_DSP_VAL            (RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF)
 113 #define RB_CLKSEL_GFX                   (1 << 0)
 114 #define RB_CM_CLKSEL_GFX_VAL            RB_CLKSEL_GFX
 115 #define RB_CLKSEL_MDM                   (1 << 0)
 116 #define RB_CM_CLKSEL_MDM_VAL            RB_CLKSEL_MDM
 117
 118 /* 2420 Ratio Equivalents */
 119 #define RXX_CLKSEL_VLYNQ                (0x12 << 15)
 120 #define RXX_CLKSEL_SSI                  (0x8 << 20)
 121
 122 /* 2420-PRCM III 532MHz core */
 123 #define RIII_CLKSEL_L3                  (4 << 0)        /* 133MHz */
 124 #define RIII_CLKSEL_L4                  (2 << 5)        /* 66.5MHz */
 125 #define RIII_CLKSEL_USB                 (4 << 25)       /* 33.25MHz */
 126 #define RIII_CM_CLKSEL1_CORE_VAL        (RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
 127                                          RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
 128                                          RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
 129                                          RIII_CLKSEL_L3)
 130 #define RIII_CLKSEL_MPU                 (2 << 0)        /* 266MHz */
 131 #define RIII_CM_CLKSEL_MPU_VAL          RIII_CLKSEL_MPU
 132 #define RIII_CLKSEL_DSP                 (3 << 0)        /* c5x - 177.3MHz */
 133 #define RIII_CLKSEL_DSP_IF              (2 << 5)        /* c5x - 88.67MHz */
 134 #define RIII_SYNC_DSP                   (1 << 7)        /* Enable sync */
 135 #define RIII_CLKSEL_IVA                 (6 << 8)        /* iva1 - 88.67MHz */
 136 #define RIII_SYNC_IVA                   (1 << 13)       /* Enable sync */
 137 #define RIII_CM_CLKSEL_DSP_VAL          (RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
 138                                          RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
 139                                          RIII_CLKSEL_DSP)
 140 #define RIII_CLKSEL_GFX                 (2 << 0)        /* 66.5MHz */
 141 #define RIII_CM_CLKSEL_GFX_VAL          RIII_CLKSEL_GFX
 142
 143 /* 2420-PRCM II 600MHz core */
 144 #define RII_CLKSEL_L3                   (6 << 0)        /* 100MHz */
 145 #define RII_CLKSEL_L4                   (2 << 5)        /* 50MHz */
 146 #define RII_CLKSEL_USB                  (2 << 25)       /* 50MHz */
 147 #define RII_CM_CLKSEL1_CORE_VAL         (RII_CLKSEL_USB | RXX_CLKSEL_SSI | \
 148                                          RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
 149                                          RX_CLKSEL_DSS1 | RII_CLKSEL_L4 | \
 150                                          RII_CLKSEL_L3)
 151 #define RII_CLKSEL_MPU                  (2 << 0)        /* 300MHz */
 152 #define RII_CM_CLKSEL_MPU_VAL           RII_CLKSEL_MPU
 153 #define RII_CLKSEL_DSP                  (3 << 0)        /* c5x - 200MHz */
 154 #define RII_CLKSEL_DSP_IF               (2 << 5)        /* c5x - 100MHz */
 155 #define RII_SYNC_DSP                    (0 << 7)        /* Bypass sync */
 156 #define RII_CLKSEL_IVA                  (3 << 8)        /* iva1 - 200MHz */
 157 #define RII_SYNC_IVA                    (0 << 13)       /* Bypass sync */
 158 #define RII_CM_CLKSEL_DSP_VAL           (RII_SYNC_IVA | RII_CLKSEL_IVA | \
 159                                          RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
 160                                          RII_CLKSEL_DSP)
 161 #define RII_CLKSEL_GFX                  (2 << 0)        /* 50MHz */
 162 #define RII_CM_CLKSEL_GFX_VAL           RII_CLKSEL_GFX
 163
 164 /* 2420-PRCM I 660MHz core */
 165 #define RI_CLKSEL_L3                    (4 << 0)        /* 165MHz */
 166 #define RI_CLKSEL_L4                    (2 << 5)        /* 82.5MHz */
 167 #define RI_CLKSEL_USB                   (4 << 25)       /* 41.25MHz */
 168 #define RI_CM_CLKSEL1_CORE_VAL          (RI_CLKSEL_USB |                \
 169                                          RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
 170                                          RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
 171                                          RI_CLKSEL_L4 | RI_CLKSEL_L3)
 172 #define RI_CLKSEL_MPU                   (2 << 0)        /* 330MHz */
 173 #define RI_CM_CLKSEL_MPU_VAL            RI_CLKSEL_MPU
 174 #define RI_CLKSEL_DSP                   (3 << 0)        /* c5x - 220MHz */
 175 #define RI_CLKSEL_DSP_IF                (2 << 5)        /* c5x - 110MHz */
 176 #define RI_SYNC_DSP                     (1 << 7)        /* Activate sync */
 177 #define RI_CLKSEL_IVA                   (4 << 8)        /* iva1 - 165MHz */
 178 #define RI_SYNC_IVA                     (0 << 13)       /* Bypass sync */
 179 #define RI_CM_CLKSEL_DSP_VAL            (RI_SYNC_IVA | RI_CLKSEL_IVA |  \
 180                                          RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
 181                                          RI_CLKSEL_DSP)
 182 #define RI_CLKSEL_GFX                   (1 << 0)        /* 165MHz */
 183 #define RI_CM_CLKSEL_GFX_VAL            RI_CLKSEL_GFX
 184
 185 /* 2420-PRCM VII (boot) */
 186 #define RVII_CLKSEL_L3                  (1 << 0)
 187 #define RVII_CLKSEL_L4                  (1 << 5)
 188 #define RVII_CLKSEL_DSS1                (1 << 8)
 189 #define RVII_CLKSEL_DSS2                (0 << 13)
 190 #define RVII_CLKSEL_VLYNQ               (1 << 15)
 191 #define RVII_CLKSEL_SSI                 (1 << 20)
 192 #define RVII_CLKSEL_USB                 (1 << 25)
 193
 194 #define RVII_CM_CLKSEL1_CORE_VAL        (RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
 195                                          RVII_CLKSEL_VLYNQ | \
 196                                          RVII_CLKSEL_DSS2 | RVII_CLKSEL_DSS1 | \
 197                                          RVII_CLKSEL_L4 | RVII_CLKSEL_L3)
 198
 199 #define RVII_CLKSEL_MPU                 (1 << 0) /* all divide by 1 */
 200 #define RVII_CM_CLKSEL_MPU_VAL          RVII_CLKSEL_MPU
 201
 202 #define RVII_CLKSEL_DSP                 (1 << 0)
 203 #define RVII_CLKSEL_DSP_IF              (1 << 5)
 204 #define RVII_SYNC_DSP                   (0 << 7)
 205 #define RVII_CLKSEL_IVA                 (1 << 8)
 206 #define RVII_SYNC_IVA                   (0 << 13)
 207 #define RVII_CM_CLKSEL_DSP_VAL          (RVII_SYNC_IVA | RVII_CLKSEL_IVA | \
 208                                          RVII_SYNC_DSP | RVII_CLKSEL_DSP_IF | \
 209                                          RVII_CLKSEL_DSP)
 210
 211 #define RVII_CLKSEL_GFX                 (1 << 0)
 212 #define RVII_CM_CLKSEL_GFX_VAL          RVII_CLKSEL_GFX
 213
 214 /*-------------------------------------------------------------------------
 215  * 2430 Target modes: Along with each configuration the CPU has several
 216  * modes which goes along with them. Modes mainly are the addition of
 217  * describe DPLL combinations to go along with a ratio.
 218  *-------------------------------------------------------------------------*/
 219
 220 /* Hardware governed */
 221 #define MX_48M_SRC                      (0 << 3)
 222 #define MX_54M_SRC                      (0 << 5)
 223 #define MX_APLLS_CLIKIN_12              (3 << 23)
 224 #define MX_APLLS_CLIKIN_13              (2 << 23)
 225 #define MX_APLLS_CLIKIN_19_2            (0 << 23)
 226
 227 /*
 228  * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
 229  * #5a  (ratio1) baseport-target, target DPLL = 266*2 = 532MHz
 230  */
 231 #define M5A_DPLL_MULT_12                (133 << 12)
 232 #define M5A_DPLL_DIV_12                 (5 << 8)
 233 #define M5A_CM_CLKSEL1_PLL_12_VAL       (MX_48M_SRC | MX_54M_SRC | \
 234                                          M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
 235                                          MX_APLLS_CLIKIN_12)
 236 #define M5A_DPLL_MULT_13                (61 << 12)
 237 #define M5A_DPLL_DIV_13                 (2 << 8)
 238 #define M5A_CM_CLKSEL1_PLL_13_VAL       (MX_48M_SRC | MX_54M_SRC | \
 239                                          M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
 240                                          MX_APLLS_CLIKIN_13)
 241 #define M5A_DPLL_MULT_19                (55 << 12)
 242 #define M5A_DPLL_DIV_19                 (3 << 8)
 243 #define M5A_CM_CLKSEL1_PLL_19_VAL       (MX_48M_SRC | MX_54M_SRC | \
 244                                          M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
 245                                          MX_APLLS_CLIKIN_19_2)
 246 /* #5b  (ratio1) target DPLL = 200*2 = 400MHz */
 247 #define M5B_DPLL_MULT_12                (50 << 12)
 248 #define M5B_DPLL_DIV_12                 (2 << 8)
 249 #define M5B_CM_CLKSEL1_PLL_12_VAL       (MX_48M_SRC | MX_54M_SRC | \
 250                                          M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
 251                                          MX_APLLS_CLIKIN_12)
 252 #define M5B_DPLL_MULT_13                (200 << 12)
 253 #define M5B_DPLL_DIV_13                 (12 << 8)
 254
 255 #define M5B_CM_CLKSEL1_PLL_13_VAL       (MX_48M_SRC | MX_54M_SRC | \
 256                                          M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
 257                                          MX_APLLS_CLIKIN_13)
 258 #define M5B_DPLL_MULT_19                (125 << 12)
 259 #define M5B_DPLL_DIV_19                 (31 << 8)
 260 #define M5B_CM_CLKSEL1_PLL_19_VAL       (MX_48M_SRC | MX_54M_SRC | \
 261                                          M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
 262                                          MX_APLLS_CLIKIN_19_2)
 263 /*
 264  * #4   (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
 265  */
 266 #define M4_DPLL_MULT_12                 (133 << 12)
 267 #define M4_DPLL_DIV_12                  (3 << 8)
 268 #define M4_CM_CLKSEL1_PLL_12_VAL        (MX_48M_SRC | MX_54M_SRC | \
 269                                          M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
 270                                          MX_APLLS_CLIKIN_12)
 271
 272 #define M4_DPLL_MULT_13                 (399 << 12)
 273 #define M4_DPLL_DIV_13                  (12 << 8)
 274 #define M4_CM_CLKSEL1_PLL_13_VAL        (MX_48M_SRC | MX_54M_SRC | \
 275                                          M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
 276                                          MX_APLLS_CLIKIN_13)
 277
 278 #define M4_DPLL_MULT_19                 (145 << 12)
 279 #define M4_DPLL_DIV_19                  (6 << 8)
 280 #define M4_CM_CLKSEL1_PLL_19_VAL        (MX_48M_SRC | MX_54M_SRC | \
 281                                          M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
 282                                          MX_APLLS_CLIKIN_19_2)
 283
 284 /*
 285  * #3   (ratio2) baseport-target, target DPLL = 330*2 = 660MHz
 286  */
 287 #define M3_DPLL_MULT_12                 (55 << 12)
 288 #define M3_DPLL_DIV_12                  (1 << 8)
 289 #define M3_CM_CLKSEL1_PLL_12_VAL        (MX_48M_SRC | MX_54M_SRC | \
 290                                          M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
 291                                          MX_APLLS_CLIKIN_12)
 292 #define M3_DPLL_MULT_13                 (76 << 12)
 293 #define M3_DPLL_DIV_13                  (2 << 8)
 294 #define M3_CM_CLKSEL1_PLL_13_VAL        (MX_48M_SRC | MX_54M_SRC | \
 295                                          M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
 296                                          MX_APLLS_CLIKIN_13)
 297 #define M3_DPLL_MULT_19                 (17 << 12)
 298 #define M3_DPLL_DIV_19                  (0 << 8)
 299 #define M3_CM_CLKSEL1_PLL_19_VAL        (MX_48M_SRC | MX_54M_SRC | \
 300                                          M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
 301                                          MX_APLLS_CLIKIN_19_2)
 302
 303 /*
 304  * #2   (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
 305  */
 306 #define M2_DPLL_MULT_12                 (55 << 12)
 307 #define M2_DPLL_DIV_12                  (1 << 8)
 308 #define M2_CM_CLKSEL1_PLL_12_VAL        (MX_48M_SRC | MX_54M_SRC | \
 309                                          M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
 310                                          MX_APLLS_CLIKIN_12)
 311
 312 /* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
 313  * relock time issue */
 314 /* Core frequency changed from 330/165 to 329/164 MHz*/
 315 #define M2_DPLL_MULT_13                 (76 << 12)
 316 #define M2_DPLL_DIV_13                  (2 << 8)
 317 #define M2_CM_CLKSEL1_PLL_13_VAL        (MX_48M_SRC | MX_54M_SRC | \
 318                                          M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
 319                                          MX_APLLS_CLIKIN_13)
 320
 321 #define M2_DPLL_MULT_19                 (17 << 12)
 322 #define M2_DPLL_DIV_19                  (0 << 8)
 323 #define M2_CM_CLKSEL1_PLL_19_VAL        (MX_48M_SRC | MX_54M_SRC | \
 324                                          M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
 325                                          MX_APLLS_CLIKIN_19_2)
 326
 327 /* boot (boot) */
 328 #define MB_DPLL_MULT                    (1 << 12)
 329 #define MB_DPLL_DIV                     (0 << 8)
 330 #define MB_CM_CLKSEL1_PLL_12_VAL        (MX_48M_SRC | MX_54M_SRC | \
 331                                          MB_DPLL_DIV | MB_DPLL_MULT | \
 332                                          MX_APLLS_CLIKIN_12)
 333
 334 #define MB_CM_CLKSEL1_PLL_13_VAL        (MX_48M_SRC | MX_54M_SRC | \
 335                                          MB_DPLL_DIV | MB_DPLL_MULT | \
 336                                          MX_APLLS_CLIKIN_13)
 337
 338 #define MB_CM_CLKSEL1_PLL_19_VAL        (MX_48M_SRC | MX_54M_SRC | \
 339                                          MB_DPLL_DIV | MB_DPLL_MULT | \
 340                                          MX_APLLS_CLIKIN_19)
 341
 342 /*
 343  * 2430 - chassis (sedna)
 344  * 165 (ratio1) same as above #2
 345  * 150 (ratio1)
 346  * 133 (ratio2) same as above #4
 347  * 110 (ratio2) same as above #3
 348  * 104 (ratio2)
 349  * boot (boot)
 350  */
 351
 352 /* PRCM I target DPLL = 2*330MHz = 660MHz */
 353 #define MI_DPLL_MULT_12                 (55 << 12)
 354 #define MI_DPLL_DIV_12                  (1 << 8)
 355 #define MI_CM_CLKSEL1_PLL_12_VAL        (MX_48M_SRC | MX_54M_SRC | \
 356                                          MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
 357                                          MX_APLLS_CLIKIN_12)
 358
 359 /*
 360  * 2420 Equivalent - mode registers
 361  * PRCM II , target DPLL = 2*300MHz = 600MHz
 362  */
 363 #define MII_DPLL_MULT_12                (50 << 12)
 364 #define MII_DPLL_DIV_12                 (1 << 8)
 365 #define MII_CM_CLKSEL1_PLL_12_VAL       (MX_48M_SRC | MX_54M_SRC |      \
 366                                          MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
 367                                          MX_APLLS_CLIKIN_12)
 368 #define MII_DPLL_MULT_13                (300 << 12)
 369 #define MII_DPLL_DIV_13                 (12 << 8)
 370 #define MII_CM_CLKSEL1_PLL_13_VAL       (MX_48M_SRC | MX_54M_SRC |      \
 371                                          MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
 372                                          MX_APLLS_CLIKIN_13)
 373
 374 /* PRCM III target DPLL = 2*266 = 532MHz*/
 375 #define MIII_DPLL_MULT_12               (133 << 12)
 376 #define MIII_DPLL_DIV_12                (5 << 8)
 377 #define MIII_CM_CLKSEL1_PLL_12_VAL      (MX_48M_SRC | MX_54M_SRC |      \
 378                                          MIII_DPLL_DIV_12 | \
 379                                          MIII_DPLL_MULT_12 | MX_APLLS_CLIKIN_12)
 380 #define MIII_DPLL_MULT_13               (266 << 12)
 381 #define MIII_DPLL_DIV_13                (12 << 8)
 382 #define MIII_CM_CLKSEL1_PLL_13_VAL      (MX_48M_SRC | MX_54M_SRC |      \
 383                                          MIII_DPLL_DIV_13 | \
 384                                          MIII_DPLL_MULT_13 | MX_APLLS_CLIKIN_13)
 385
 386 /* PRCM VII (boot bypass) */
 387 #define MVII_CM_CLKSEL1_PLL_12_VAL      MB_CM_CLKSEL1_PLL_12_VAL
 388 #define MVII_CM_CLKSEL1_PLL_13_VAL      MB_CM_CLKSEL1_PLL_13_VAL
 389
 390 /* High and low operation value */
 391 #define MX_CLKSEL2_PLL_2x_VAL           (2 << 0)
 392 #define MX_CLKSEL2_PLL_1x_VAL           (1 << 0)
 393
 394 /* MPU speed defines */
 395 #define S12M    12000000
 396 #define S13M    13000000
 397 #define S19M    19200000
 398 #define S26M    26000000
 399 #define S100M   100000000
 400 #define S133M   133000000
 401 #define S150M   150000000
 402 #define S164M   164000000
 403 #define S165M   165000000
 404 #define S199M   199000000
 405 #define S200M   200000000
 406 #define S266M   266000000
 407 #define S300M   300000000
 408 #define S329M   329000000
 409 #define S330M   330000000
 410 #define S399M   399000000
 411 #define S400M   400000000
 412 #define S532M   532000000
 413 #define S600M   600000000
 414 #define S658M   658000000
 415 #define S660M   660000000
 416 #define S798M   798000000
 417
 418
 419 extern const struct prcm_config omap2420_rate_table[];
 420 extern const struct prcm_config omap2430_rate_table[];
 421 extern const struct prcm_config *rate_table;
 422 extern const struct prcm_config *curr_prcm_set;
 423
 424 #endif