drivers/usb/musb/omap2430.c

   1 /*
   2  * Copyright (C) 2005-2007 by Texas Instruments
   3  * Some code has been taken from tusb6010.c
   4  * Copyrights for that are attributable to:
   5  * Copyright (C) 2006 Nokia Corporation
   6  * Tony Lindgren <tony@atomide.com>
   7  *
   8  * This file is part of the Inventra Controller Driver for Linux.
   9  *
  10  * The Inventra Controller Driver for Linux is free software; you
  11  * can redistribute it and/or modify it under the terms of the GNU
  12  * General Public License version 2 as published by the Free Software
  13  * Foundation.
  14  *
  15  * The Inventra Controller Driver for Linux is distributed in
  16  * the hope that it will be useful, but WITHOUT ANY WARRANTY;
  17  * without even the implied warranty of MERCHANTABILITY or
  18  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
  19  * License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with The Inventra Controller Driver for Linux ; if not,
  23  * write to the Free Software Foundation, Inc., 59 Temple Place,
  24  * Suite 330, Boston, MA  02111-1307  USA
  25  *
  26  */
  27 #include <linux/module.h>
  28 #include <linux/kernel.h>
  29 #include <linux/sched.h>
  30 #include <linux/init.h>
  31 #include <linux/list.h>
  32 #include <linux/clk.h>
  33 #include <linux/io.h>
  34
  35 #include <asm/mach-types.h>
  36 #include <mach/hardware.h>
  37 #include <plat/mux.h>
  38
  39 #include "musb_core.h"
  40 #include "omap2430.h"
  41
  42 #ifdef CONFIG_ARCH_OMAP3430
  43 #define get_cpu_rev()   2
  44 #endif
  45
  46
  47 static struct timer_list musb_idle_timer;
  48
  49 static void musb_do_idle(unsigned long _musb)
  50 {
  51         struct musb     *musb = (void *)_musb;
  52         unsigned long   flags;
  53 #ifdef CONFIG_USB_MUSB_HDRC_HCD
  54         u8      power;
  55 #endif
  56         u8      devctl;
  57
  58         spin_lock_irqsave(&musb->lock, flags);
  59
  60         devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
  61
  62         switch (musb->xceiv->state) {
  63         case OTG_STATE_A_WAIT_BCON:
  64                 devctl &= ~MUSB_DEVCTL_SESSION;
  65                 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
  66
  67                 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
  68                 if (devctl & MUSB_DEVCTL_BDEVICE) {
  69                         musb->xceiv->state = OTG_STATE_B_IDLE;
  70                         MUSB_DEV_MODE(musb);
  71                 } else {
  72                         musb->xceiv->state = OTG_STATE_A_IDLE;
  73                         MUSB_HST_MODE(musb);
  74                 }
  75                 break;
  76 #ifdef CONFIG_USB_MUSB_HDRC_HCD
  77         case OTG_STATE_A_SUSPEND:
  78                 /* finish RESUME signaling? */
  79                 if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
  80                         power = musb_readb(musb->mregs, MUSB_POWER);
  81                         power &= ~MUSB_POWER_RESUME;
  82                         DBG(1, "root port resume stopped, power %02x\n", power);
  83                         musb_writeb(musb->mregs, MUSB_POWER, power);
  84                         musb->is_active = 1;
  85                         musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
  86                                                 | MUSB_PORT_STAT_RESUME);
  87                         musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
  88                         usb_hcd_poll_rh_status(musb_to_hcd(musb));
  89                         /* NOTE: it might really be A_WAIT_BCON ... */
  90                         musb->xceiv->state = OTG_STATE_A_HOST;
  91                 }
  92                 break;
  93 #endif
  94 #ifdef CONFIG_USB_MUSB_HDRC_HCD
  95         case OTG_STATE_A_HOST:
  96                 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
  97                 if (devctl &  MUSB_DEVCTL_BDEVICE)
  98                         musb->xceiv->state = OTG_STATE_B_IDLE;
  99                 else
 100                         musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
 101 #endif
 102         default:
 103                 break;
 104         }
 105         spin_unlock_irqrestore(&musb->lock, flags);
 106 }
 107
 108
 109 void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 110 {
 111         unsigned long           default_timeout = jiffies + msecs_to_jiffies(3);
 112         static unsigned long    last_timer;
 113
 114         if (timeout == 0)
 115                 timeout = default_timeout;
 116
 117         /* Never idle if active, or when VBUS timeout is not set as host */
 118         if (musb->is_active || ((musb->a_wait_bcon == 0)
 119                         && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
 120                 DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
 121                 del_timer(&musb_idle_timer);
 122                 last_timer = jiffies;
 123                 return;
 124         }
 125
 126         if (time_after(last_timer, timeout)) {
 127                 if (!timer_pending(&musb_idle_timer))
 128                         last_timer = timeout;
 129                 else {
 130                         DBG(4, "Longer idle timer already pending, ignoring\n");
 131                         return;
 132                 }
 133         }
 134         last_timer = timeout;
 135
 136         DBG(4, "%s inactive, for idle timer for %lu ms\n",
 137                 otg_state_string(musb),
 138                 (unsigned long)jiffies_to_msecs(timeout - jiffies));
 139         mod_timer(&musb_idle_timer, timeout);
 140 }
 141
 142 void musb_platform_enable(struct musb *musb)
 143 {
 144 }
 145 void musb_platform_disable(struct musb *musb)
 146 {
 147 }
 148 static void omap_vbus_power(struct musb *musb, int is_on, int sleeping)
 149 {
 150 }
 151
 152 static void omap_set_vbus(struct musb *musb, int is_on)
 153 {
 154         u8              devctl;
 155         /* HDRC controls CPEN, but beware current surges during device
 156          * connect.  They can trigger transient overcurrent conditions
 157          * that must be ignored.
 158          */
 159
 160         devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 161
 162         if (is_on) {
 163                 musb->is_active = 1;
 164                 musb->xceiv->default_a = 1;
 165                 musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
 166                 devctl |= MUSB_DEVCTL_SESSION;
 167
 168                 MUSB_HST_MODE(musb);
 169         } else {
 170                 musb->is_active = 0;
 171
 172                 /* NOTE:  we're skipping A_WAIT_VFALL -> A_IDLE and
 173                  * jumping right to B_IDLE...
 174                  */
 175
 176                 musb->xceiv->default_a = 0;
 177                 musb->xceiv->state = OTG_STATE_B_IDLE;
 178                 devctl &= ~MUSB_DEVCTL_SESSION;
 179
 180                 MUSB_DEV_MODE(musb);
 181         }
 182         musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 183
 184         DBG(1, "VBUS %s, devctl %02x "
 185                 /* otg %3x conf %08x prcm %08x */ "\n",
 186                 otg_state_string(musb),
 187                 musb_readb(musb->mregs, MUSB_DEVCTL));
 188 }
 189
 190 static int musb_platform_resume(struct musb *musb);
 191
 192 int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 193 {
 194         u8      devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 195
 196         devctl |= MUSB_DEVCTL_SESSION;
 197         musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 198
 199         return 0;
 200 }
 201
 202 int __init musb_platform_init(struct musb *musb)
 203 {
 204         u32 l;
 205
 206 #if defined(CONFIG_ARCH_OMAP2430)
 207         omap_cfg_reg(AE5_2430_USB0HS_STP);
 208 #endif
 209
 210         /* We require some kind of external transceiver, hooked
 211          * up through ULPI.  TWL4030-family PMICs include one,
 212          * which needs a driver, drivers aren't always needed.
 213          */
 214         musb->xceiv = otg_get_transceiver();
 215         if (!musb->xceiv) {
 216                 pr_err("HS USB OTG: no transceiver configured\n");
 217                 return -ENODEV;
 218         }
 219
 220         musb_platform_resume(musb);
 221
 222         l = musb_readl(musb->mregs, OTG_SYSCONFIG);
 223         l &= ~ENABLEWAKEUP;     /* disable wakeup */
 224         l &= ~NOSTDBY;          /* remove possible nostdby */
 225         l |= SMARTSTDBY;        /* enable smart standby */
 226         l &= ~AUTOIDLE;         /* disable auto idle */
 227         l &= ~NOIDLE;           /* remove possible noidle */
 228         l |= SMARTIDLE;         /* enable smart idle */
 229         /*
 230          * MUSB AUTOIDLE don't work in 3430.
 231          * Workaround by Richard Woodruff/TI
 232          */
 233         if (!cpu_is_omap3430())
 234                 l |= AUTOIDLE;          /* enable auto idle */
 235         musb_writel(musb->mregs, OTG_SYSCONFIG, l);
 236
 237         l = musb_readl(musb->mregs, OTG_INTERFSEL);
 238         l |= ULPI_12PIN;
 239         musb_writel(musb->mregs, OTG_INTERFSEL, l);
 240
 241         pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
 242                         "sysstatus 0x%x, intrfsel 0x%x, simenable  0x%x\n",
 243                         musb_readl(musb->mregs, OTG_REVISION),
 244                         musb_readl(musb->mregs, OTG_SYSCONFIG),
 245                         musb_readl(musb->mregs, OTG_SYSSTATUS),
 246                         musb_readl(musb->mregs, OTG_INTERFSEL),
 247                         musb_readl(musb->mregs, OTG_SIMENABLE));
 248
 249         omap_vbus_power(musb, musb->board_mode == MUSB_HOST, 1);
 250
 251         if (is_host_enabled(musb))
 252                 musb->board_set_vbus = omap_set_vbus;
 253
 254         setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 255
 256         return 0;
 257 }
 258
 259 #ifdef CONFIG_PM
 260 void musb_platform_save_context(struct musb *musb,
 261                 struct musb_context_registers *musb_context)
 262 {
 263         musb_context->otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG);
 264         musb_context->otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY);
 265 }
 266
 267 void musb_platform_restore_context(struct musb *musb,
 268                 struct musb_context_registers *musb_context)
 269 {
 270         musb_writel(musb->mregs, OTG_SYSCONFIG, musb_context->otg_sysconfig);
 271         musb_writel(musb->mregs, OTG_FORCESTDBY, musb_context->otg_forcestandby);
 272 }
 273 #endif
 274
 275 int musb_platform_suspend(struct musb *musb)
 276 {
 277         u32 l;
 278
 279         if (!musb->clock)
 280                 return 0;
 281
 282         /* in any role */
 283         l = musb_readl(musb->mregs, OTG_FORCESTDBY);
 284         l |= ENABLEFORCE;       /* enable MSTANDBY */
 285         musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 286
 287         l = musb_readl(musb->mregs, OTG_SYSCONFIG);
 288         l |= ENABLEWAKEUP;      /* enable wakeup */
 289         musb_writel(musb->mregs, OTG_SYSCONFIG, l);
 290
 291         otg_set_suspend(musb->xceiv, 1);
 292
 293         if (musb->set_clock)
 294                 musb->set_clock(musb->clock, 0);
 295         else
 296                 clk_disable(musb->clock);
 297
 298         return 0;
 299 }
 300
 301 static int musb_platform_resume(struct musb *musb)
 302 {
 303         u32 l;
 304
 305         if (!musb->clock)
 306                 return 0;
 307
 308         otg_set_suspend(musb->xceiv, 0);
 309
 310         if (musb->set_clock)
 311                 musb->set_clock(musb->clock, 1);
 312         else
 313                 clk_enable(musb->clock);
 314
 315         l = musb_readl(musb->mregs, OTG_SYSCONFIG);
 316         l &= ~ENABLEWAKEUP;     /* disable wakeup */
 317         musb_writel(musb->mregs, OTG_SYSCONFIG, l);
 318
 319         l = musb_readl(musb->mregs, OTG_FORCESTDBY);
 320         l &= ~ENABLEFORCE;      /* disable MSTANDBY */
 321         musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 322
 323         return 0;
 324 }
 325
 326
 327 int musb_platform_exit(struct musb *musb)
 328 {
 329
 330         omap_vbus_power(musb, 0 /*off*/, 1);
 331
 332         musb_platform_suspend(musb);
 333
 334         return 0;
 335 }