davinci: cleanup mdio arch code and switch to phy_id
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / mach-davinci / board-sffsdr.c
blobab4292d4f80b7ba5cd199db065ed3c967d420f2e
1 /*
2 * Lyrtech SFFSDR board support.
4 * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
5 * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
7 * Based on DV-EVM platform, original copyright follows:
9 * Copyright (C) 2007 MontaVista Software, Inc.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 #include <linux/init.h>
27 #include <linux/platform_device.h>
28 #include <linux/i2c.h>
29 #include <linux/i2c/at24.h>
30 #include <linux/mtd/mtd.h>
31 #include <linux/mtd/nand.h>
32 #include <linux/mtd/partitions.h>
34 #include <asm/mach-types.h>
35 #include <asm/mach/arch.h>
36 #include <asm/mach/flash.h>
38 #include <mach/dm644x.h>
39 #include <mach/common.h>
40 #include <mach/i2c.h>
41 #include <mach/serial.h>
42 #include <mach/mux.h>
43 #include <mach/usb.h>
45 #define SFFSDR_PHY_ID "0:01"
46 static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
47 /* U-Boot Environment: Block 0
48 * UBL: Block 1
49 * U-Boot: Blocks 6-7 (256 kb)
50 * Integrity Kernel: Blocks 8-31 (3 Mb)
51 * Integrity Data: Blocks 100-END
54 .name = "Linux Kernel",
55 .offset = 32 * SZ_128K,
56 .size = 16 * SZ_128K, /* 2 Mb */
57 .mask_flags = MTD_WRITEABLE, /* Force read-only */
60 .name = "Linux ROOT",
61 .offset = MTDPART_OFS_APPEND,
62 .size = 256 * SZ_128K, /* 32 Mb */
63 .mask_flags = 0, /* R/W */
67 static struct flash_platform_data davinci_sffsdr_nandflash_data = {
68 .parts = davinci_sffsdr_nandflash_partition,
69 .nr_parts = ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
72 static struct resource davinci_sffsdr_nandflash_resource[] = {
74 .start = DM644X_ASYNC_EMIF_DATA_CE0_BASE,
75 .end = DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
76 .flags = IORESOURCE_MEM,
77 }, {
78 .start = DM644X_ASYNC_EMIF_CONTROL_BASE,
79 .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
80 .flags = IORESOURCE_MEM,
84 static struct platform_device davinci_sffsdr_nandflash_device = {
85 .name = "davinci_nand", /* Name of driver */
86 .id = 0,
87 .dev = {
88 .platform_data = &davinci_sffsdr_nandflash_data,
90 .num_resources = ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
91 .resource = davinci_sffsdr_nandflash_resource,
94 static struct at24_platform_data eeprom_info = {
95 .byte_len = (64*1024) / 8,
96 .page_size = 32,
97 .flags = AT24_FLAG_ADDR16,
100 static struct i2c_board_info __initdata i2c_info[] = {
102 I2C_BOARD_INFO("24lc64", 0x50),
103 .platform_data = &eeprom_info,
105 /* Other I2C devices:
106 * MSP430, addr 0x23 (not used)
107 * PCA9543, addr 0x70 (setup done by U-Boot)
108 * ADS7828, addr 0x48 (ADC for voltage monitoring.)
112 static struct davinci_i2c_platform_data i2c_pdata = {
113 .bus_freq = 20 /* kHz */,
114 .bus_delay = 100 /* usec */,
117 static void __init sffsdr_init_i2c(void)
119 davinci_init_i2c(&i2c_pdata);
120 i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
123 static struct platform_device *davinci_sffsdr_devices[] __initdata = {
124 &davinci_sffsdr_nandflash_device,
127 static struct davinci_uart_config uart_config __initdata = {
128 .enabled_uarts = (1 << 0),
131 static void __init davinci_sffsdr_map_io(void)
133 dm644x_init();
136 static __init void davinci_sffsdr_init(void)
138 struct davinci_soc_info *soc_info = &davinci_soc_info;
140 platform_add_devices(davinci_sffsdr_devices,
141 ARRAY_SIZE(davinci_sffsdr_devices));
142 sffsdr_init_i2c();
143 davinci_serial_init(&uart_config);
144 soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID;
145 davinci_setup_usb(0, 0); /* We support only peripheral mode. */
147 /* mux VLYNQ pins */
148 davinci_cfg_reg(DM644X_VLYNQEN);
149 davinci_cfg_reg(DM644X_VLYNQWD);
152 MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
153 /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
154 .phys_io = IO_PHYS,
155 .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
156 .boot_params = (DAVINCI_DDR_BASE + 0x100),
157 .map_io = davinci_sffsdr_map_io,
158 .init_irq = davinci_irq_init,
159 .timer = &davinci_timer,
160 .init_machine = davinci_sffsdr_init,
161 MACHINE_END