drivers/usb/host/ehci-pmcmsp.c

   1 /*
   2  * PMC MSP EHCI (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 2006-2010 PMC-Sierra Inc
   5  *
   6  * This file is subject to the terms and conditions of the GNU General Public
   7  * License.  See the file "COPYING" in the main directory of this archive
   8  * for more details.
   9  *
  10  */
  11
  12 /* includes */
  13 #include <linux/platform_device.h>
  14 #include <linux/gpio.h>
  15 #include <linux/usb.h>
  16 #include <msp_usb.h>
  17
  18 /* stream disable*/
  19 #define USB_CTRL_MODE_STREAM_DISABLE    0x10
  20
  21 /* threshold */
  22 #define USB_CTRL_FIFO_THRESH            0x00300000
  23
  24 /* register offset for usb_mode */
  25 #define USB_EHCI_REG_USB_MODE           0x68
  26
  27 /* register offset for usb fifo */
  28 #define USB_EHCI_REG_USB_FIFO           0x24
  29
  30 /* register offset for usb status */
  31 #define USB_EHCI_REG_USB_STATUS         0x44
  32
  33 /* serial/parallel transceiver */
  34 #define USB_EHCI_REG_BIT_STAT_STS       (1<<29)
  35
  36 /* TWI USB0 host device pin */
  37 #define MSP_PIN_USB0_HOST_DEV           49
  38
  39 /* TWI USB1 host device pin */
  40 #define MSP_PIN_USB1_HOST_DEV           50
  41
  42
  43 static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci)
  44 {
  45         u8 *base;
  46         u8 *statreg;
  47         u8 *fiforeg;
  48         u32 val;
  49         struct ehci_regs *reg_base = ehci->regs;
  50
  51         /* get register base */
  52         base = (u8 *)reg_base + USB_EHCI_REG_USB_MODE;
  53         statreg = (u8 *)reg_base + USB_EHCI_REG_USB_STATUS;
  54         fiforeg = (u8 *)reg_base + USB_EHCI_REG_USB_FIFO;
  55
  56         /* Disable controller mode stream */
  57         val = ehci_readl(ehci, (u32 *)base);
  58         ehci_writel(ehci, (val | USB_CTRL_MODE_STREAM_DISABLE),
  59                         (u32 *)base);
  60
  61         /* clear STS to select parallel transceiver interface */
  62         val = ehci_readl(ehci, (u32 *)statreg);
  63         val = val & ~USB_EHCI_REG_BIT_STAT_STS;
  64         ehci_writel(ehci, val, (u32 *)statreg);
  65
  66         /* write to set the proper fifo threshold */
  67         ehci_writel(ehci, USB_CTRL_FIFO_THRESH, (u32 *)fiforeg);
  68
  69         /* set TWI GPIO USB_HOST_DEV pin high */
  70         gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1);
  71 #ifdef CONFIG_MSP_HAS_DUAL_USB
  72         gpio_direction_output(MSP_PIN_USB1_HOST_DEV, 1);
  73 #endif
  74 }
  75
  76 /* called during probe() after chip reset completes */
  77 static int ehci_msp_setup(struct usb_hcd *hcd)
  78 {
  79         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
  80         int                     retval;
  81         ehci->big_endian_mmio = 1;
  82         ehci->big_endian_desc = 1;
  83
  84         ehci->caps = hcd->regs;
  85         ehci->regs = hcd->regs +
  86                 HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
  87         dbg_hcs_params(ehci, "reset");
  88         dbg_hcc_params(ehci, "reset");
  89
  90         /* cache this readonly data; minimize chip reads */
  91         ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
  92         hcd->has_tt = 1;
  93
  94         retval = ehci_halt(ehci);
  95         if (retval)
  96                 return retval;
  97
  98         ehci_reset(ehci);
  99
 100         /* data structure init */
 101         retval = ehci_init(hcd);
 102         if (retval)
 103                 return retval;
 104
 105         usb_hcd_tdi_set_mode(ehci);
 106         ehci_port_power(ehci, 0);
 107
 108         return retval;
 109 }
 110
 111
 112 /* configure so an HC device and id are always provided
 113  * always called with process context; sleeping is OK
 114  */
 115
 116 static int usb_hcd_msp_map_regs(struct mspusb_device *dev)
 117 {
 118         struct resource *res;
 119         struct platform_device *pdev = &dev->dev;
 120         u32 res_len;
 121         int retval;
 122
 123         /* MAB register space */
 124         res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 125         if (res == NULL)
 126                 return -ENOMEM;
 127         res_len = res->end - res->start + 1;
 128         if (!request_mem_region(res->start, res_len, "mab regs"))
 129                 return -EBUSY;
 130
 131         dev->mab_regs = ioremap_nocache(res->start, res_len);
 132         if (dev->mab_regs == NULL) {
 133                 retval = -ENOMEM;
 134                 goto err1;
 135         }
 136
 137         /* MSP USB register space */
 138         res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
 139         if (res == NULL) {
 140                 retval = -ENOMEM;
 141                 goto err2;
 142         }
 143         res_len = res->end - res->start + 1;
 144         if (!request_mem_region(res->start, res_len, "usbid regs")) {
 145                 retval = -EBUSY;
 146                 goto err2;
 147         }
 148         dev->usbid_regs = ioremap_nocache(res->start, res_len);
 149         if (dev->usbid_regs == NULL) {
 150                 retval = -ENOMEM;
 151                 goto err3;
 152         }
 153
 154         return 0;
 155 err3:
 156         res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
 157         res_len = res->end - res->start + 1;
 158         release_mem_region(res->start, res_len);
 159 err2:
 160         iounmap(dev->mab_regs);
 161 err1:
 162         res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 163         res_len = res->end - res->start + 1;
 164         release_mem_region(res->start, res_len);
 165         dev_err(&pdev->dev, "Failed to map non-EHCI regs.\n");
 166         return retval;
 167 }
 168
 169 /**
 170  * usb_hcd_msp_probe - initialize PMC MSP-based HCDs
 171  * Context: !in_interrupt()
 172  *
 173  * Allocates basic resources for this USB host controller, and
 174  * then invokes the start() method for the HCD associated with it
 175  * through the hotplug entry's driver_data.
 176  *
 177  */
 178 int usb_hcd_msp_probe(const struct hc_driver *driver,
 179                           struct platform_device *dev)
 180 {
 181         int retval;
 182         struct usb_hcd *hcd;
 183         struct resource *res;
 184         struct ehci_hcd         *ehci ;
 185
 186         hcd = usb_create_hcd(driver, &dev->dev, "pmcmsp");
 187         if (!hcd)
 188                 return -ENOMEM;
 189
 190         res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 191         if (res == NULL) {
 192                 pr_debug("No IOMEM resource info for %s.\n", dev->name);
 193                 retval = -ENOMEM;
 194                 goto err1;
 195         }
 196         hcd->rsrc_start = res->start;
 197         hcd->rsrc_len = res->end - res->start + 1;
 198         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, dev->name)) {
 199                 retval = -EBUSY;
 200                 goto err1;
 201         }
 202         hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
 203         if (!hcd->regs) {
 204                 pr_debug("ioremap failed");
 205                 retval = -ENOMEM;
 206                 goto err2;
 207         }
 208
 209         res = platform_get_resource(dev, IORESOURCE_IRQ, 0);
 210         if (res == NULL) {
 211                 dev_err(&dev->dev, "No IRQ resource info for %s.\n", dev->name);
 212                 retval = -ENOMEM;
 213                 goto err3;
 214         }
 215
 216         /* Map non-EHCI register spaces */
 217         retval = usb_hcd_msp_map_regs(to_mspusb_device(dev));
 218         if (retval != 0)
 219                 goto err3;
 220
 221         ehci = hcd_to_ehci(hcd);
 222         ehci->big_endian_mmio = 1;
 223         ehci->big_endian_desc = 1;
 224
 225
 226         retval = usb_add_hcd(hcd, res->start, IRQF_SHARED);
 227         if (retval == 0)
 228                 return 0;
 229
 230         usb_remove_hcd(hcd);
 231 err3:
 232         iounmap(hcd->regs);
 233 err2:
 234         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 235 err1:
 236         usb_put_hcd(hcd);
 237
 238         return retval;
 239 }
 240
 241
 242
 243 /**
 244  * usb_hcd_msp_remove - shutdown processing for PMC MSP-based HCDs
 245  * @dev: USB Host Controller being removed
 246  * Context: !in_interrupt()
 247  *
 248  * Reverses the effect of usb_hcd_msp_probe(), first invoking
 249  * the HCD's stop() method.  It is always called from a thread
 250  * context, normally "rmmod", "apmd", or something similar.
 251  *
 252  * may be called without controller electrically present
 253  * may be called with controller, bus, and devices active
 254  */
 255 void usb_hcd_msp_remove(struct usb_hcd *hcd, struct platform_device *dev)
 256 {
 257         usb_remove_hcd(hcd);
 258         iounmap(hcd->regs);
 259         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 260         usb_put_hcd(hcd);
 261 }
 262
 263 #ifdef CONFIG_MSP_HAS_DUAL_USB
 264 /*
 265  * Wrapper around the main ehci_irq.  Since both USB host controllers are
 266  * sharing the same IRQ, need to first determine whether we're the intended
 267  * recipient of this interrupt.
 268  */
 269 static irqreturn_t ehci_msp_irq(struct usb_hcd *hcd)
 270 {
 271         u32 int_src;
 272         struct device *dev = hcd->self.controller;
 273         struct platform_device *pdev;
 274         struct mspusb_device *mdev;
 275         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 276         /* need to reverse-map a couple of containers to get our device */
 277         pdev = to_platform_device(dev);
 278         mdev = to_mspusb_device(pdev);
 279
 280         /* Check to see if this interrupt is for this host controller */
 281         int_src = ehci_readl(ehci, &mdev->mab_regs->int_stat);
 282         if (int_src & (1 << pdev->id))
 283                 return ehci_irq(hcd);
 284
 285         /* Not for this device */
 286         return IRQ_NONE;
 287 }
 288 #endif /* DUAL_USB */
 289
 290 static const struct hc_driver ehci_msp_hc_driver = {
 291         .description =          hcd_name,
 292         .product_desc =         "PMC MSP EHCI",
 293         .hcd_priv_size =        sizeof(struct ehci_hcd),
 294
 295         /*
 296          * generic hardware linkage
 297          */
 298 #ifdef CONFIG_MSP_HAS_DUAL_USB
 299         .irq =                  ehci_msp_irq,
 300 #else
 301         .irq =                  ehci_irq,
 302 #endif
 303         .flags =                HCD_MEMORY | HCD_USB2,
 304
 305         /*
 306          * basic lifecycle operations
 307          */
 308         .reset =                ehci_msp_setup,
 309         .start =                ehci_run,
 310         .shutdown               = ehci_shutdown,
 311         .start                  = ehci_run,
 312         .stop                   = ehci_stop,
 313
 314         /*
 315          * managing i/o requests and associated device resources
 316          */
 317         .urb_enqueue            = ehci_urb_enqueue,
 318         .urb_dequeue            = ehci_urb_dequeue,
 319         .endpoint_disable       = ehci_endpoint_disable,
 320         .endpoint_reset         = ehci_endpoint_reset,
 321
 322         /*
 323          * scheduling support
 324          */
 325         .get_frame_number       = ehci_get_frame,
 326
 327         /*
 328          * root hub support
 329          */
 330         .hub_status_data        = ehci_hub_status_data,
 331         .hub_control            = ehci_hub_control,
 332         .bus_suspend            = ehci_bus_suspend,
 333         .bus_resume             = ehci_bus_resume,
 334         .relinquish_port        = ehci_relinquish_port,
 335         .port_handed_over       = ehci_port_handed_over,
 336
 337         .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
 338 };
 339
 340 static int ehci_hcd_msp_drv_probe(struct platform_device *pdev)
 341 {
 342         int ret;
 343
 344         pr_debug("In ehci_hcd_msp_drv_probe");
 345
 346         if (usb_disabled())
 347                 return -ENODEV;
 348
 349         gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO");
 350 #ifdef CONFIG_MSP_HAS_DUAL_USB
 351         gpio_request(MSP_PIN_USB1_HOST_DEV, "USB1_HOST_DEV_GPIO");
 352 #endif
 353
 354         ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev);
 355
 356         return ret;
 357 }
 358
 359 static int ehci_hcd_msp_drv_remove(struct platform_device *pdev)
 360 {
 361         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 362
 363         usb_hcd_msp_remove(hcd, pdev);
 364
 365         /* free TWI GPIO USB_HOST_DEV pin */
 366         gpio_free(MSP_PIN_USB0_HOST_DEV);
 367 #ifdef CONFIG_MSP_HAS_DUAL_USB
 368         gpio_free(MSP_PIN_USB1_HOST_DEV);
 369 #endif
 370
 371         return 0;
 372 }
 373
 374 MODULE_ALIAS("pmcmsp-ehci");
 375
 376 static struct platform_driver ehci_hcd_msp_driver = {
 377         .probe          = ehci_hcd_msp_drv_probe,
 378         .remove         = ehci_hcd_msp_drv_remove,
 379         .driver         = {
 380                 .name   = "pmcmsp-ehci",
 381                 .owner  = THIS_MODULE,
 382         },
 383 };