arch/arm/mach-u300/timer.c

   1 /*
   2  *
   3  * arch/arm/mach-u300/timer.c
   4  *
   5  *
   6  * Copyright (C) 2007-2009 ST-Ericsson AB
   7  * License terms: GNU General Public License (GPL) version 2
   8  * Timer COH 901 328, runs the OS timer interrupt.
   9  * Author: Linus Walleij <linus.walleij@stericsson.com>
  10  */
  11 #include <linux/interrupt.h>
  12 #include <linux/sched.h>
  13 #include <linux/time.h>
  14 #include <linux/timex.h>
  15 #include <linux/clockchips.h>
  16 #include <linux/clocksource.h>
  17 #include <linux/types.h>
  18 #include <linux/io.h>
  19 #include <linux/clk.h>
  20 #include <linux/err.h>
  21
  22 #include <mach/hardware.h>
  23
  24 /* Generic stuff */
  25 #include <asm/sched_clock.h>
  26 #include <asm/mach/map.h>
  27 #include <asm/mach/time.h>
  28 #include <asm/mach/irq.h>
  29
  30 /* Be able to sleep for atleast 4 seconds (usually more) */
  31 #define APPTIMER_MIN_RANGE 4
  32
  33 /*
  34  * APP side special timer registers
  35  * This timer contains four timers which can fire an interrupt each.
  36  * OS (operating system) timer @ 32768 Hz
  37  * DD (device driver) timer @ 1 kHz
  38  * GP1 (general purpose 1) timer @ 1MHz
  39  * GP2 (general purpose 2) timer @ 1MHz
  40  */
  41
  42 /* Reset OS Timer 32bit (-/W) */
  43 #define U300_TIMER_APP_ROST                                     (0x0000)
  44 #define U300_TIMER_APP_ROST_TIMER_RESET                         (0x00000000)
  45 /* Enable OS Timer 32bit (-/W) */
  46 #define U300_TIMER_APP_EOST                                     (0x0004)
  47 #define U300_TIMER_APP_EOST_TIMER_ENABLE                        (0x00000000)
  48 /* Disable OS Timer 32bit (-/W) */
  49 #define U300_TIMER_APP_DOST                                     (0x0008)
  50 #define U300_TIMER_APP_DOST_TIMER_DISABLE                       (0x00000000)
  51 /* OS Timer Mode Register 32bit (-/W) */
  52 #define U300_TIMER_APP_SOSTM                                    (0x000c)
  53 #define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS                    (0x00000000)
  54 #define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT                      (0x00000001)
  55 /* OS Timer Status Register 32bit (R/-) */
  56 #define U300_TIMER_APP_OSTS                                     (0x0010)
  57 #define U300_TIMER_APP_OSTS_TIMER_STATE_MASK                    (0x0000000F)
  58 #define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE                    (0x00000001)
  59 #define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE                  (0x00000002)
  60 #define U300_TIMER_APP_OSTS_ENABLE_IND                          (0x00000010)
  61 #define U300_TIMER_APP_OSTS_MODE_MASK                           (0x00000020)
  62 #define U300_TIMER_APP_OSTS_MODE_CONTINUOUS                     (0x00000000)
  63 #define U300_TIMER_APP_OSTS_MODE_ONE_SHOT                       (0x00000020)
  64 #define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND                     (0x00000040)
  65 #define U300_TIMER_APP_OSTS_IRQ_PENDING_IND                     (0x00000080)
  66 /* OS Timer Current Count Register 32bit (R/-) */
  67 #define U300_TIMER_APP_OSTCC                                    (0x0014)
  68 /* OS Timer Terminal Count Register 32bit (R/W) */
  69 #define U300_TIMER_APP_OSTTC                                    (0x0018)
  70 /* OS Timer Interrupt Enable Register 32bit (-/W) */
  71 #define U300_TIMER_APP_OSTIE                                    (0x001c)
  72 #define U300_TIMER_APP_OSTIE_IRQ_DISABLE                        (0x00000000)
  73 #define U300_TIMER_APP_OSTIE_IRQ_ENABLE                         (0x00000001)
  74 /* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
  75 #define U300_TIMER_APP_OSTIA                                    (0x0020)
  76 #define U300_TIMER_APP_OSTIA_IRQ_ACK                            (0x00000080)
  77
  78 /* Reset DD Timer 32bit (-/W) */
  79 #define U300_TIMER_APP_RDDT                                     (0x0040)
  80 #define U300_TIMER_APP_RDDT_TIMER_RESET                         (0x00000000)
  81 /* Enable DD Timer 32bit (-/W) */
  82 #define U300_TIMER_APP_EDDT                                     (0x0044)
  83 #define U300_TIMER_APP_EDDT_TIMER_ENABLE                        (0x00000000)
  84 /* Disable DD Timer 32bit (-/W) */
  85 #define U300_TIMER_APP_DDDT                                     (0x0048)
  86 #define U300_TIMER_APP_DDDT_TIMER_DISABLE                       (0x00000000)
  87 /* DD Timer Mode Register 32bit (-/W) */
  88 #define U300_TIMER_APP_SDDTM                                    (0x004c)
  89 #define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS                    (0x00000000)
  90 #define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT                      (0x00000001)
  91 /* DD Timer Status Register 32bit (R/-) */
  92 #define U300_TIMER_APP_DDTS                                     (0x0050)
  93 #define U300_TIMER_APP_DDTS_TIMER_STATE_MASK                    (0x0000000F)
  94 #define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE                    (0x00000001)
  95 #define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE                  (0x00000002)
  96 #define U300_TIMER_APP_DDTS_ENABLE_IND                          (0x00000010)
  97 #define U300_TIMER_APP_DDTS_MODE_MASK                           (0x00000020)
  98 #define U300_TIMER_APP_DDTS_MODE_CONTINUOUS                     (0x00000000)
  99 #define U300_TIMER_APP_DDTS_MODE_ONE_SHOT                       (0x00000020)
 100 #define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND                     (0x00000040)
 101 #define U300_TIMER_APP_DDTS_IRQ_PENDING_IND                     (0x00000080)
 102 /* DD Timer Current Count Register 32bit (R/-) */
 103 #define U300_TIMER_APP_DDTCC                                    (0x0054)
 104 /* DD Timer Terminal Count Register 32bit (R/W) */
 105 #define U300_TIMER_APP_DDTTC                                    (0x0058)
 106 /* DD Timer Interrupt Enable Register 32bit (-/W) */
 107 #define U300_TIMER_APP_DDTIE                                    (0x005c)
 108 #define U300_TIMER_APP_DDTIE_IRQ_DISABLE                        (0x00000000)
 109 #define U300_TIMER_APP_DDTIE_IRQ_ENABLE                         (0x00000001)
 110 /* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
 111 #define U300_TIMER_APP_DDTIA                                    (0x0060)
 112 #define U300_TIMER_APP_DDTIA_IRQ_ACK                            (0x00000080)
 113
 114 /* Reset GP1 Timer 32bit (-/W) */
 115 #define U300_TIMER_APP_RGPT1                                    (0x0080)
 116 #define U300_TIMER_APP_RGPT1_TIMER_RESET                        (0x00000000)
 117 /* Enable GP1 Timer 32bit (-/W) */
 118 #define U300_TIMER_APP_EGPT1                                    (0x0084)
 119 #define U300_TIMER_APP_EGPT1_TIMER_ENABLE                       (0x00000000)
 120 /* Disable GP1 Timer 32bit (-/W) */
 121 #define U300_TIMER_APP_DGPT1                                    (0x0088)
 122 #define U300_TIMER_APP_DGPT1_TIMER_DISABLE                      (0x00000000)
 123 /* GP1 Timer Mode Register 32bit (-/W) */
 124 #define U300_TIMER_APP_SGPT1M                                   (0x008c)
 125 #define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS                   (0x00000000)
 126 #define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT                     (0x00000001)
 127 /* GP1 Timer Status Register 32bit (R/-) */
 128 #define U300_TIMER_APP_GPT1S                                    (0x0090)
 129 #define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK                   (0x0000000F)
 130 #define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE                   (0x00000001)
 131 #define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE                 (0x00000002)
 132 #define U300_TIMER_APP_GPT1S_ENABLE_IND                         (0x00000010)
 133 #define U300_TIMER_APP_GPT1S_MODE_MASK                          (0x00000020)
 134 #define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS                    (0x00000000)
 135 #define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT                      (0x00000020)
 136 #define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND                    (0x00000040)
 137 #define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND                    (0x00000080)
 138 /* GP1 Timer Current Count Register 32bit (R/-) */
 139 #define U300_TIMER_APP_GPT1CC                                   (0x0094)
 140 /* GP1 Timer Terminal Count Register 32bit (R/W) */
 141 #define U300_TIMER_APP_GPT1TC                                   (0x0098)
 142 /* GP1 Timer Interrupt Enable Register 32bit (-/W) */
 143 #define U300_TIMER_APP_GPT1IE                                   (0x009c)
 144 #define U300_TIMER_APP_GPT1IE_IRQ_DISABLE                       (0x00000000)
 145 #define U300_TIMER_APP_GPT1IE_IRQ_ENABLE                        (0x00000001)
 146 /* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
 147 #define U300_TIMER_APP_GPT1IA                                   (0x00a0)
 148 #define U300_TIMER_APP_GPT1IA_IRQ_ACK                           (0x00000080)
 149
 150 /* Reset GP2 Timer 32bit (-/W) */
 151 #define U300_TIMER_APP_RGPT2                                    (0x00c0)
 152 #define U300_TIMER_APP_RGPT2_TIMER_RESET                        (0x00000000)
 153 /* Enable GP2 Timer 32bit (-/W) */
 154 #define U300_TIMER_APP_EGPT2                                    (0x00c4)
 155 #define U300_TIMER_APP_EGPT2_TIMER_ENABLE                       (0x00000000)
 156 /* Disable GP2 Timer 32bit (-/W) */
 157 #define U300_TIMER_APP_DGPT2                                    (0x00c8)
 158 #define U300_TIMER_APP_DGPT2_TIMER_DISABLE                      (0x00000000)
 159 /* GP2 Timer Mode Register 32bit (-/W) */
 160 #define U300_TIMER_APP_SGPT2M                                   (0x00cc)
 161 #define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS                   (0x00000000)
 162 #define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT                     (0x00000001)
 163 /* GP2 Timer Status Register 32bit (R/-) */
 164 #define U300_TIMER_APP_GPT2S                                    (0x00d0)
 165 #define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK                   (0x0000000F)
 166 #define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE                   (0x00000001)
 167 #define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE                 (0x00000002)
 168 #define U300_TIMER_APP_GPT2S_ENABLE_IND                         (0x00000010)
 169 #define U300_TIMER_APP_GPT2S_MODE_MASK                          (0x00000020)
 170 #define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS                    (0x00000000)
 171 #define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT                      (0x00000020)
 172 #define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND                    (0x00000040)
 173 #define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND                    (0x00000080)
 174 /* GP2 Timer Current Count Register 32bit (R/-) */
 175 #define U300_TIMER_APP_GPT2CC                                   (0x00d4)
 176 /* GP2 Timer Terminal Count Register 32bit (R/W) */
 177 #define U300_TIMER_APP_GPT2TC                                   (0x00d8)
 178 /* GP2 Timer Interrupt Enable Register 32bit (-/W) */
 179 #define U300_TIMER_APP_GPT2IE                                   (0x00dc)
 180 #define U300_TIMER_APP_GPT2IE_IRQ_DISABLE                       (0x00000000)
 181 #define U300_TIMER_APP_GPT2IE_IRQ_ENABLE                        (0x00000001)
 182 /* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
 183 #define U300_TIMER_APP_GPT2IA                                   (0x00e0)
 184 #define U300_TIMER_APP_GPT2IA_IRQ_ACK                           (0x00000080)
 185
 186 /* Clock request control register - all four timers */
 187 #define U300_TIMER_APP_CRC                                      (0x100)
 188 #define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE                 (0x00000001)
 189
 190 #define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
 191 #define US_PER_TICK ((1000000 + (HZ/2)) / HZ)
 192
 193 /*
 194  * The u300_set_mode() function is always called first, if we
 195  * have oneshot timer active, the oneshot scheduling function
 196  * u300_set_next_event() is called immediately after.
 197  */
 198 static void u300_set_mode(enum clock_event_mode mode,
 199                           struct clock_event_device *evt)
 200 {
 201         switch (mode) {
 202         case CLOCK_EVT_MODE_PERIODIC:
 203                 /* Disable interrupts on GPT1 */
 204                 writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
 205                        U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
 206                 /* Disable GP1 while we're reprogramming it. */
 207                 writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
 208                        U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
 209                 /*
 210                  * Set the periodic mode to a certain number of ticks per
 211                  * jiffy.
 212                  */
 213                 writel(TICKS_PER_JIFFY,
 214                        U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
 215                 /*
 216                  * Set continuous mode, so the timer keeps triggering
 217                  * interrupts.
 218                  */
 219                 writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
 220                        U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
 221                 /* Enable timer interrupts */
 222                 writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
 223                        U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
 224                 /* Then enable the OS timer again */
 225                 writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
 226                        U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
 227                 break;
 228         case CLOCK_EVT_MODE_ONESHOT:
 229                 /* Just break; here? */
 230                 /*
 231                  * The actual event will be programmed by the next event hook,
 232                  * so we just set a dummy value somewhere at the end of the
 233                  * universe here.
 234                  */
 235                 /* Disable interrupts on GPT1 */
 236                 writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
 237                        U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
 238                 /* Disable GP1 while we're reprogramming it. */
 239                 writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
 240                        U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
 241                 /*
 242                  * Expire far in the future, u300_set_next_event() will be
 243                  * called soon...
 244                  */
 245                 writel(0xFFFFFFFF, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
 246                 /* We run one shot per tick here! */
 247                 writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
 248                        U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
 249                 /* Enable interrupts for this timer */
 250                 writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
 251                        U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
 252                 /* Enable timer */
 253                 writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
 254                        U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
 255                 break;
 256         case CLOCK_EVT_MODE_UNUSED:
 257         case CLOCK_EVT_MODE_SHUTDOWN:
 258                 /* Disable interrupts on GP1 */
 259                 writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
 260                        U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
 261                 /* Disable GP1 */
 262                 writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
 263                        U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
 264                 break;
 265         case CLOCK_EVT_MODE_RESUME:
 266                 /* Ignore this call */
 267                 break;
 268         }
 269 }
 270
 271 /*
 272  * The app timer in one shot mode obviously has to be reprogrammed
 273  * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
 274  * the interrupt disable + timer disable commands with a reset command,
 275  * it will fail miserably. Apparently (and I found this the hard way)
 276  * the timer is very sensitive to the instruction order, though you don't
 277  * get that impression from the data sheet.
 278  */
 279 static int u300_set_next_event(unsigned long cycles,
 280                                struct clock_event_device *evt)
 281
 282 {
 283         /* Disable interrupts on GPT1 */
 284         writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
 285                U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
 286         /* Disable GP1 while we're reprogramming it. */
 287         writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
 288                U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
 289         /* Reset the General Purpose timer 1. */
 290         writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
 291                U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
 292         /* IRQ in n * cycles */
 293         writel(cycles, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
 294         /*
 295          * We run one shot per tick here! (This is necessary to reconfigure,
 296          * the timer will tilt if you don't!)
 297          */
 298         writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
 299                U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
 300         /* Enable timer interrupts */
 301         writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
 302                U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
 303         /* Then enable the OS timer again */
 304         writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
 305                U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
 306         return 0;
 307 }
 308
 309
 310 /* Use general purpose timer 1 as clock event */
 311 static struct clock_event_device clockevent_u300_1mhz = {
 312         .name           = "GPT1",
 313         .rating         = 300, /* Reasonably fast and accurate clock event */
 314         .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 315         .set_next_event = u300_set_next_event,
 316         .set_mode       = u300_set_mode,
 317 };
 318
 319 /* Clock event timer interrupt handler */
 320 static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
 321 {
 322         struct clock_event_device *evt = &clockevent_u300_1mhz;
 323         /* ACK/Clear timer IRQ for the APP GPT1 Timer */
 324         writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
 325                 U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IA);
 326         evt->event_handler(evt);
 327         return IRQ_HANDLED;
 328 }
 329
 330 static struct irqaction u300_timer_irq = {
 331         .name           = "U300 Timer Tick",
 332         .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
 333         .handler        = u300_timer_interrupt,
 334 };
 335
 336 /* Use general purpose timer 2 as clock source */
 337 static cycle_t u300_get_cycles(struct clocksource *cs)
 338 {
 339         return (cycles_t) readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
 340 }
 341
 342 static struct clocksource clocksource_u300_1mhz = {
 343         .name           = "GPT2",
 344         .rating         = 300, /* Reasonably fast and accurate clock source */
 345         .read           = u300_get_cycles,
 346         .mask           = CLOCKSOURCE_MASK(32), /* 32 bits */
 347         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 348 };
 349
 350 /*
 351  * Override the global weak sched_clock symbol with this
 352  * local implementation which uses the clocksource to get some
 353  * better resolution when scheduling the kernel. We accept that
 354  * this wraps around for now, since it is just a relative time
 355  * stamp. (Inspired by OMAP implementation.)
 356  */
 357 static DEFINE_CLOCK_DATA(cd);
 358
 359 unsigned long long notrace sched_clock(void)
 360 {
 361         u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
 362         return cyc_to_sched_clock(&cd, cyc, (u32)~0);
 363 }
 364
 365 static void notrace u300_update_sched_clock(void)
 366 {
 367         u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
 368         update_sched_clock(&cd, cyc, (u32)~0);
 369 }
 370
 371
 372 /*
 373  * This sets up the system timers, clock source and clock event.
 374  */
 375 static void __init u300_timer_init(void)
 376 {
 377         struct clk *clk;
 378         unsigned long rate;
 379
 380         /* Clock the interrupt controller */
 381         clk = clk_get_sys("apptimer", NULL);
 382         BUG_ON(IS_ERR(clk));
 383         clk_enable(clk);
 384         rate = clk_get_rate(clk);
 385
 386         init_sched_clock(&cd, u300_update_sched_clock, 32, rate);
 387
 388         /*
 389          * Disable the "OS" and "DD" timers - these are designed for Symbian!
 390          * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
 391          */
 392         writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
 393                 U300_TIMER_APP_VBASE + U300_TIMER_APP_CRC);
 394         writel(U300_TIMER_APP_ROST_TIMER_RESET,
 395                 U300_TIMER_APP_VBASE + U300_TIMER_APP_ROST);
 396         writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
 397                 U300_TIMER_APP_VBASE + U300_TIMER_APP_DOST);
 398         writel(U300_TIMER_APP_RDDT_TIMER_RESET,
 399                 U300_TIMER_APP_VBASE + U300_TIMER_APP_RDDT);
 400         writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
 401                 U300_TIMER_APP_VBASE + U300_TIMER_APP_DDDT);
 402
 403         /* Reset the General Purpose timer 1. */
 404         writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
 405                 U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
 406
 407         /* Set up the IRQ handler */
 408         setup_irq(IRQ_U300_TIMER_APP_GP1, &u300_timer_irq);
 409
 410         /* Reset the General Purpose timer 2 */
 411         writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
 412                 U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT2);
 413         /* Set this timer to run around forever */
 414         writel(0xFFFFFFFFU, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2TC);
 415         /* Set continuous mode so it wraps around */
 416         writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
 417                U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT2M);
 418         /* Disable timer interrupts */
 419         writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
 420                 U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2IE);
 421         /* Then enable the GP2 timer to use as a free running us counter */
 422         writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
 423                 U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
 424
 425         if (clocksource_register_hz(&clocksource_u300_1mhz, rate))
 426                 printk(KERN_ERR "timer: failed to initialize clock "
 427                        "source %s\n", clocksource_u300_1mhz.name);
 428
 429         clockevents_calc_mult_shift(&clockevent_u300_1mhz,
 430                                     rate, APPTIMER_MIN_RANGE);
 431         /* 32bit counter, so 32bits delta is max */
 432         clockevent_u300_1mhz.max_delta_ns =
 433                 clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);
 434         /* This timer is slow enough to set for 1 cycle == 1 MHz */
 435         clockevent_u300_1mhz.min_delta_ns =
 436                 clockevent_delta2ns(1, &clockevent_u300_1mhz);
 437         clockevent_u300_1mhz.cpumask = cpumask_of(0);
 438         clockevents_register_device(&clockevent_u300_1mhz);
 439         /*
 440          * TODO: init and register the rest of the timers too, they can be
 441          * used by hrtimers!
 442          */
 443 }
 444
 445 /*
 446  * Very simple system timer that only register the clock event and
 447  * clock source.
 448  */
 449 struct sys_timer u300_timer = {
 450         .init           = u300_timer_init,
 451 };