da850-evm: add UI Expander pushbuttons

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / Documentation / cgroups / blkio-controller.txt

                                Block IO Controller
                                ===================
Overview
========
cgroup subsys "blkio" implements the block io controller. There seems to be
a need of various kinds of IO control policies (like proportional BW, max BW)
both at leaf nodes as well as at intermediate nodes in a storage hierarchy.
Plan is to use the same cgroup based management interface for blkio controller
and based on user options switch IO policies in the background.

Currently two IO control policies are implemented. First one is proportional
weight time based division of disk policy. It is implemented in CFQ. Hence
this policy takes effect only on leaf nodes when CFQ is being used. The second
one is throttling policy which can be used to specify upper IO rate limits
on devices. This policy is implemented in generic block layer and can be
used on leaf nodes as well as higher level logical devices like device mapper.

HOWTO
=====
Proportional Weight division of bandwidth
-----------------------------------------
You can do a very simple testing of running two dd threads in two different
cgroups. Here is what you can do.

- Enable Block IO controller
        CONFIG_BLK_CGROUP=y

- Enable group scheduling in CFQ
        CONFIG_CFQ_GROUP_IOSCHED=y

- Compile and boot into kernel and mount IO controller (blkio).

        mount -t cgroup -o blkio none /cgroup

- Create two cgroups
        mkdir -p /cgroup/test1/ /cgroup/test2

- Set weights of group test1 and test2
        echo 1000 > /cgroup/test1/blkio.weight
        echo 500 > /cgroup/test2/blkio.weight

- Create two same size files (say 512MB each) on same disk (file1, file2) and
  launch two dd threads in different cgroup to read those files.

        sync
        echo 3 > /proc/sys/vm/drop_caches

        dd if=/mnt/sdb/zerofile1 of=/dev/null &
        echo $! > /cgroup/test1/tasks
        cat /cgroup/test1/tasks

        dd if=/mnt/sdb/zerofile2 of=/dev/null &
        echo $! > /cgroup/test2/tasks
        cat /cgroup/test2/tasks

- At macro level, first dd should finish first. To get more precise data, keep
  on looking at (with the help of script), at blkio.disk_time and
  blkio.disk_sectors files of both test1 and test2 groups. This will tell how
  much disk time (in milli seconds), each group got and how many secotors each
  group dispatched to the disk. We provide fairness in terms of disk time, so
  ideally io.disk_time of cgroups should be in proportion to the weight.

Throttling/Upper Limit policy
-----------------------------
- Enable Block IO controller
        CONFIG_BLK_CGROUP=y

- Enable throttling in block layer
        CONFIG_BLK_DEV_THROTTLING=y

- Mount blkio controller
        mount -t cgroup -o blkio none /cgroup/blkio

- Specify a bandwidth rate on particular device for root group. The format
  for policy is "<major>:<minor>  <byes_per_second>".

        echo "8:16  1048576" > /cgroup/blkio/blkio.read_bps_device

  Above will put a limit of 1MB/second on reads happening for root group
  on device having major/minor number 8:16.

- Run dd to read a file and see if rate is throttled to 1MB/s or not.

                # dd if=/mnt/common/zerofile of=/dev/null bs=4K count=1024
                # iflag=direct
        1024+0 records in
        1024+0 records out
        4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s

 Limits for writes can be put using blkio.write_bps_device file.

Various user visible config options
===================================
CONFIG_BLK_CGROUP
        - Block IO controller.

CONFIG_DEBUG_BLK_CGROUP
        - Debug help. Right now some additional stats file show up in cgroup
          if this option is enabled.

CONFIG_CFQ_GROUP_IOSCHED
        - Enables group scheduling in CFQ. Currently only 1 level of group
          creation is allowed.

CONFIG_BLK_DEV_THROTTLING
        - Enable block device throttling support in block layer.

Details of cgroup files
=======================
Proportional weight policy files
--------------------------------
- blkio.weight
        - Specifies per cgroup weight. This is default weight of the group
          on all the devices until and unless overridden by per device rule.
          (See blkio.weight_device).
          Currently allowed range of weights is from 100 to 1000.

- blkio.weight_device
        - One can specify per cgroup per device rules using this interface.
          These rules override the default value of group weight as specified
          by blkio.weight.

          Following is the format.

          #echo dev_maj:dev_minor weight > /path/to/cgroup/blkio.weight_device
          Configure weight=300 on /dev/sdb (8:16) in this cgroup
          # echo 8:16 300 > blkio.weight_device
          # cat blkio.weight_device
          dev     weight
          8:16    300

          Configure weight=500 on /dev/sda (8:0) in this cgroup
          # echo 8:0 500 > blkio.weight_device
          # cat blkio.weight_device
          dev     weight
          8:0     500
          8:16    300

          Remove specific weight for /dev/sda in this cgroup
          # echo 8:0 0 > blkio.weight_device
          # cat blkio.weight_device
          dev     weight
          8:16    300

- blkio.time
        - disk time allocated to cgroup per device in milliseconds. First
          two fields specify the major and minor number of the device and
          third field specifies the disk time allocated to group in
          milliseconds.

- blkio.sectors
        - number of sectors transferred to/from disk by the group. First
          two fields specify the major and minor number of the device and
          third field specifies the number of sectors transferred by the
          group to/from the device.

- blkio.io_service_bytes
        - Number of bytes transferred to/from the disk by the group. These
          are further divided by the type of operation - read or write, sync
          or async. First two fields specify the major and minor number of the
          device, third field specifies the operation type and the fourth field
          specifies the number of bytes.

- blkio.io_serviced
        - Number of IOs completed to/from the disk by the group. These
          are further divided by the type of operation - read or write, sync
          or async. First two fields specify the major and minor number of the
          device, third field specifies the operation type and the fourth field
          specifies the number of IOs.

- blkio.io_service_time
        - Total amount of time between request dispatch and request completion
          for the IOs done by this cgroup. This is in nanoseconds to make it
          meaningful for flash devices too. For devices with queue depth of 1,
          this time represents the actual service time. When queue_depth > 1,
          that is no longer true as requests may be served out of order. This
          may cause the service time for a given IO to include the service time
          of multiple IOs when served out of order which may result in total
          io_service_time > actual time elapsed. This time is further divided by
          the type of operation - read or write, sync or async. First two fields
          specify the major and minor number of the device, third field
          specifies the operation type and the fourth field specifies the
          io_service_time in ns.

- blkio.io_wait_time
        - Total amount of time the IOs for this cgroup spent waiting in the
          scheduler queues for service. This can be greater than the total time
          elapsed since it is cumulative io_wait_time for all IOs. It is not a
          measure of total time the cgroup spent waiting but rather a measure of
          the wait_time for its individual IOs. For devices with queue_depth > 1
          this metric does not include the time spent waiting for service once
          the IO is dispatched to the device but till it actually gets serviced
          (there might be a time lag here due to re-ordering of requests by the
          device). This is in nanoseconds to make it meaningful for flash
          devices too. This time is further divided by the type of operation -
          read or write, sync or async. First two fields specify the major and
          minor number of the device, third field specifies the operation type
          and the fourth field specifies the io_wait_time in ns.

- blkio.io_merged
        - Total number of bios/requests merged into requests belonging to this
          cgroup. This is further divided by the type of operation - read or
          write, sync or async.

- blkio.io_queued
        - Total number of requests queued up at any given instant for this
          cgroup. This is further divided by the type of operation - read or
          write, sync or async.

- blkio.avg_queue_size
        - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
          The average queue size for this cgroup over the entire time of this
          cgroup's existence. Queue size samples are taken each time one of the
          queues of this cgroup gets a timeslice.

- blkio.group_wait_time
        - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
          This is the amount of time the cgroup had to wait since it became busy
          (i.e., went from 0 to 1 request queued) to get a timeslice for one of
          its queues. This is different from the io_wait_time which is the
          cumulative total of the amount of time spent by each IO in that cgroup
          waiting in the scheduler queue. This is in nanoseconds. If this is
          read when the cgroup is in a waiting (for timeslice) state, the stat
          will only report the group_wait_time accumulated till the last time it
          got a timeslice and will not include the current delta.

- blkio.empty_time
        - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
          This is the amount of time a cgroup spends without any pending
          requests when not being served, i.e., it does not include any time
          spent idling for one of the queues of the cgroup. This is in
          nanoseconds. If this is read when the cgroup is in an empty state,
          the stat will only report the empty_time accumulated till the last
          time it had a pending request and will not include the current delta.

- blkio.idle_time
        - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
          This is the amount of time spent by the IO scheduler idling for a
          given cgroup in anticipation of a better request than the exising ones
          from other queues/cgroups. This is in nanoseconds. If this is read
          when the cgroup is in an idling state, the stat will only report the
          idle_time accumulated till the last idle period and will not include
          the current delta.

- blkio.dequeue
        - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y. This
          gives the statistics about how many a times a group was dequeued
          from service tree of the device. First two fields specify the major
          and minor number of the device and third field specifies the number
          of times a group was dequeued from a particular device.

Throttling/Upper limit policy files
-----------------------------------
- blkio.throttle.read_bps_device
        - Specifies upper limit on READ rate from the device. IO rate is
          specified in bytes per second. Rules are per deivce. Following is
          the format.

  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.read_bps_device

- blkio.throttle.write_bps_device
        - Specifies upper limit on WRITE rate to the device. IO rate is
          specified in bytes per second. Rules are per deivce. Following is
          the format.

  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.write_bps_device

- blkio.throttle.read_iops_device
        - Specifies upper limit on READ rate from the device. IO rate is
          specified in IO per second. Rules are per deivce. Following is
          the format.

  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.read_iops_device

- blkio.throttle.write_iops_device
        - Specifies upper limit on WRITE rate to the device. IO rate is
          specified in io per second. Rules are per deivce. Following is
          the format.

  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.write_iops_device

Note: If both BW and IOPS rules are specified for a device, then IO is
      subjectd to both the constraints.

- blkio.throttle.io_serviced
        - Number of IOs (bio) completed to/from the disk by the group (as
          seen by throttling policy). These are further divided by the type
          of operation - read or write, sync or async. First two fields specify
          the major and minor number of the device, third field specifies the
          operation type and the fourth field specifies the number of IOs.

          blkio.io_serviced does accounting as seen by CFQ and counts are in
          number of requests (struct request). On the other hand,
          blkio.throttle.io_serviced counts number of IO in terms of number
          of bios as seen by throttling policy.  These bios can later be
          merged by elevator and total number of requests completed can be
          lesser.

- blkio.throttle.io_service_bytes
        - Number of bytes transferred to/from the disk by the group. These
          are further divided by the type of operation - read or write, sync
          or async. First two fields specify the major and minor number of the
          device, third field specifies the operation type and the fourth field
          specifies the number of bytes.

          These numbers should roughly be same as blkio.io_service_bytes as
          updated by CFQ. The difference between two is that
          blkio.io_service_bytes will not be updated if CFQ is not operating
          on request queue.

Common files among various policies
-----------------------------------
- blkio.reset_stats
        - Writing an int to this file will result in resetting all the stats
          for that cgroup.

CFQ sysfs tunable
=================
/sys/block/<disk>/queue/iosched/group_isolation
-----------------------------------------------

If group_isolation=1, it provides stronger isolation between groups at the
expense of throughput. By default group_isolation is 0. In general that
means that if group_isolation=0, expect fairness for sequential workload
only. Set group_isolation=1 to see fairness for random IO workload also.

Generally CFQ will put random seeky workload in sync-noidle category. CFQ
will disable idling on these queues and it does a collective idling on group
of such queues. Generally these are slow moving queues and if there is a
sync-noidle service tree in each group, that group gets exclusive access to
disk for certain period. That means it will bring the throughput down if
group does not have enough IO to drive deeper queue depths and utilize disk
capacity to the fullest in the slice allocated to it. But the flip side is
that even a random reader should get better latencies and overall throughput
if there are lots of sequential readers/sync-idle workload running in the
system.

If group_isolation=0, then CFQ automatically moves all the random seeky queues
in the root group. That means there will be no service differentiation for
that kind of workload. This leads to better throughput as we do collective
idling on root sync-noidle tree.

By default one should run with group_isolation=0. If that is not sufficient
and one wants stronger isolation between groups, then set group_isolation=1
but this will come at cost of reduced throughput.

/sys/block/<disk>/queue/iosched/slice_idle
------------------------------------------
On a faster hardware CFQ can be slow, especially with sequential workload.
This happens because CFQ idles on a single queue and single queue might not
drive deeper request queue depths to keep the storage busy. In such scenarios
one can try setting slice_idle=0 and that would switch CFQ to IOPS
(IO operations per second) mode on NCQ supporting hardware.

That means CFQ will not idle between cfq queues of a cfq group and hence be
able to driver higher queue depth and achieve better throughput. That also
means that cfq provides fairness among groups in terms of IOPS and not in
terms of disk time.

/sys/block/<disk>/queue/iosched/group_idle
------------------------------------------
If one disables idling on individual cfq queues and cfq service trees by
setting slice_idle=0, group_idle kicks in. That means CFQ will still idle
on the group in an attempt to provide fairness among groups.

By default group_idle is same as slice_idle and does not do anything if
slice_idle is enabled.

One can experience an overall throughput drop if you have created multiple
groups and put applications in that group which are not driving enough
IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle
on individual groups and throughput should improve.

What works
==========
- Currently only sync IO queues are support. All the buffered writes are
  still system wide and not per group. Hence we will not see service
  differentiation between buffered writes between groups.