drivers/ide/ide-scan-pci.c

   1 /*
   2  * support for probing IDE PCI devices in the PCI bus order
   3  *
   4  * Copyright (c) 1998-2000  Andre Hedrick <andre@linux-ide.org>
   5  * Copyright (c) 1995-1998  Mark Lord
   6  *
   7  * May be copied or modified under the terms of the GNU General Public License
   8  */
   9
  10 #include <linux/kernel.h>
  11 #include <linux/init.h>
  12 #include <linux/module.h>
  13 #include <linux/ide.h>
  14
  15 /*
  16  *      Module interfaces
  17  */
  18
  19 static int pre_init = 1;                /* Before first ordered IDE scan */
  20 static LIST_HEAD(ide_pci_drivers);
  21
  22 /*
  23  *      __ide_pci_register_driver       -       attach IDE driver
  24  *      @driver: pci driver
  25  *      @module: owner module of the driver
  26  *
  27  *      Registers a driver with the IDE layer. The IDE layer arranges that
  28  *      boot time setup is done in the expected device order and then
  29  *      hands the controllers off to the core PCI code to do the rest of
  30  *      the work.
  31  *
  32  *      Returns are the same as for pci_register_driver
  33  */
  34
  35 int __ide_pci_register_driver(struct pci_driver *driver, struct module *module,
  36                               const char *mod_name)
  37 {
  38         if (!pre_init)
  39                 return __pci_register_driver(driver, module, mod_name);
  40         driver->driver.owner = module;
  41         list_add_tail(&driver->node, &ide_pci_drivers);
  42         return 0;
  43 }
  44 EXPORT_SYMBOL_GPL(__ide_pci_register_driver);
  45
  46 /**
  47  *      ide_scan_pcidev         -       find an IDE driver for a device
  48  *      @dev: PCI device to check
  49  *
  50  *      Look for an IDE driver to handle the device we are considering.
  51  *      This is only used during boot up to get the ordering correct. After
  52  *      boot up the pci layer takes over the job.
  53  */
  54
  55 static int __init ide_scan_pcidev(struct pci_dev *dev)
  56 {
  57         struct list_head *l;
  58         struct pci_driver *d;
  59
  60         list_for_each(l, &ide_pci_drivers) {
  61                 d = list_entry(l, struct pci_driver, node);
  62                 if (d->id_table) {
  63                         const struct pci_device_id *id =
  64                                 pci_match_id(d->id_table, dev);
  65
  66                         if (id != NULL && d->probe(dev, id) >= 0) {
  67                                 dev->driver = d;
  68                                 pci_dev_get(dev);
  69                                 return 1;
  70                         }
  71                 }
  72         }
  73         return 0;
  74 }
  75
  76 /**
  77  *      ide_scan_pcibus         -       perform the initial IDE driver scan
  78  *
  79  *      Perform the initial bus rather than driver ordered scan of the
  80  *      PCI drivers. After this all IDE pci handling becomes standard
  81  *      module ordering not traditionally ordered.
  82  */
  83
  84 static int __init ide_scan_pcibus(void)
  85 {
  86         struct pci_dev *dev = NULL;
  87         struct pci_driver *d;
  88         struct list_head *l, *n;
  89
  90         pre_init = 0;
  91         while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)))
  92                 ide_scan_pcidev(dev);
  93
  94         /*
  95          *      Hand the drivers over to the PCI layer now we
  96          *      are post init.
  97          */
  98
  99         list_for_each_safe(l, n, &ide_pci_drivers) {
 100                 list_del(l);
 101                 d = list_entry(l, struct pci_driver, node);
 102                 if (__pci_register_driver(d, d->driver.owner,
 103                                           d->driver.mod_name))
 104                         printk(KERN_ERR "%s: failed to register %s driver\n",
 105                                         __func__, d->driver.mod_name);
 106         }
 107
 108         return 0;
 109 }
 110
 111 module_init(ide_scan_pcibus);