2 * Driver for the SWIM3 (Super Woz Integrated Machine 3)
3 * floppy controller found on Power Macintoshes.
5 * Copyright (C) 1996 Paul Mackerras.
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
19 #include <linux/config.h>
20 #include <linux/stddef.h>
21 #include <linux/kernel.h>
22 #include <linux/sched.h>
23 #include <linux/timer.h>
24 #include <linux/delay.h>
26 #include <linux/ioctl.h>
27 #include <linux/blkdev.h>
28 #include <linux/devfs_fs_kernel.h>
29 #include <linux/interrupt.h>
30 #include <linux/module.h>
32 #include <asm/dbdma.h>
34 #include <asm/uaccess.h>
35 #include <asm/mediabay.h>
36 #include <asm/machdep.h>
37 #include <asm/pmac_feature.h>
39 static struct request_queue
*swim3_queue
;
40 static struct gendisk
*disks
[2];
41 static struct request
*fd_req
;
43 #define MAX_FLOPPIES 2
57 #define REG(x) unsigned char x; char x ## _pad[15];
60 * The names for these registers mostly represent speculation on my part.
61 * It will be interesting to see how close they are to the names Apple uses.
65 REG(timer
); /* counts down at 1MHz */
68 REG(select
); /* controls CA0, CA1, CA2 and LSTRB signals */
70 REG(control
); /* writing bits clears them */
71 REG(status
); /* writing bits sets them in control */
73 REG(nseek
); /* # tracks to seek */
74 REG(ctrack
); /* current track number */
75 REG(csect
); /* current sector number */
76 REG(gap3
); /* size of gap 3 in track format */
77 REG(sector
); /* sector # to read or write */
78 REG(nsect
); /* # sectors to read or write */
82 #define control_bic control
83 #define control_bis status
85 /* Bits in select register */
89 /* Bits in control register */
93 #define WRITE_SECTORS 0x10
94 #define DO_ACTION 0x08
95 #define DRIVE2_ENABLE 0x04
96 #define DRIVE_ENABLE 0x02
97 #define INTR_ENABLE 0x01
99 /* Bits in status register */
100 #define FIFO_1BYTE 0x80
101 #define FIFO_2BYTE 0x40
105 #define INTR_PENDING 0x02
106 #define MARK_BYTE 0x01
108 /* Bits in intr and intr_enable registers */
109 #define ERROR_INTR 0x20
110 #define DATA_CHANGED 0x10
111 #define TRANSFER_DONE 0x08
112 #define SEEN_SECTOR 0x04
113 #define SEEK_DONE 0x02
114 #define TIMER_DONE 0x01
116 /* Bits in error register */
117 #define ERR_DATA_CRC 0x80
118 #define ERR_ADDR_CRC 0x40
119 #define ERR_OVERRUN 0x04
120 #define ERR_UNDERRUN 0x01
122 /* Bits in setup register */
123 #define S_SW_RESET 0x80
124 #define S_GCR_WRITE 0x40
125 #define S_IBM_DRIVE 0x20
126 #define S_TEST_MODE 0x10
127 #define S_FCLK_DIV2 0x08
129 #define S_COPY_PROT 0x02
130 #define S_INV_WDATA 0x01
132 /* Select values for swim3_action */
133 #define SEEK_POSITIVE 0
134 #define SEEK_NEGATIVE 4
143 /* Select values for swim3_select and swim3_readbit */
147 #define RELAX 3 /* also eject in progress */
148 #define READ_DATA_0 4
149 #define TWOMEG_DRIVE 5
150 #define SINGLE_SIDED 6 /* drive or diskette is 4MB type? */
151 #define DRIVE_PRESENT 7
154 #define TRACK_ZERO 10
156 #define READ_DATA_1 12
158 #define SEEK_COMPLETE 14
159 #define ONEMEG_MEDIA 15
161 /* Definitions of values used in writing and formatting */
162 #define DATA_ESCAPE 0x99
163 #define GCR_SYNC_EXC 0x3f
164 #define GCR_SYNC_CONV 0x80
165 #define GCR_FIRST_MARK 0xd5
166 #define GCR_SECOND_MARK 0xaa
167 #define GCR_ADDR_MARK "\xd5\xaa\x00"
168 #define GCR_DATA_MARK "\xd5\xaa\x0b"
169 #define GCR_SLIP_BYTE "\x27\xaa"
170 #define GCR_SELF_SYNC "\x3f\xbf\x1e\x34\x3c\x3f"
172 #define DATA_99 "\x99\x99"
173 #define MFM_ADDR_MARK "\x99\xa1\x99\xa1\x99\xa1\x99\xfe"
174 #define MFM_INDEX_MARK "\x99\xc2\x99\xc2\x99\xc2\x99\xfc"
175 #define MFM_GAP_LEN 12
177 struct floppy_state
{
178 enum swim_state state
;
179 struct swim3 __iomem
*swim3
; /* hardware registers */
180 struct dbdma_regs __iomem
*dma
; /* DMA controller registers */
181 int swim3_intr
; /* interrupt number for SWIM3 */
182 int dma_intr
; /* interrupt number for DMA channel */
183 int cur_cyl
; /* cylinder head is on, or -1 */
184 int cur_sector
; /* last sector we saw go past */
185 int req_cyl
; /* the cylinder for the current r/w request */
186 int head
; /* head number ditto */
187 int req_sector
; /* sector number ditto */
188 int scount
; /* # sectors we're transferring at present */
191 int secpercyl
; /* disk geometry information */
194 int write_prot
; /* 1 if write-protected, 0 if not, -1 dunno */
195 struct dbdma_cmd
*dma_cmd
;
198 struct timer_list timeout
;
201 wait_queue_head_t wait
;
203 struct device_node
* media_bay
; /* NULL when not in bay */
204 char dbdma_cmd_space
[5 * sizeof(struct dbdma_cmd
)];
207 static struct floppy_state floppy_states
[MAX_FLOPPIES
];
208 static int floppy_count
= 0;
209 static DEFINE_SPINLOCK(swim3_lock
);
211 static unsigned short write_preamble
[] = {
212 0x4e4e, 0x4e4e, 0x4e4e, 0x4e4e, 0x4e4e, /* gap field */
213 0, 0, 0, 0, 0, 0, /* sync field */
214 0x99a1, 0x99a1, 0x99a1, 0x99fb, /* data address mark */
215 0x990f /* no escape for 512 bytes */
218 static unsigned short write_postamble
[] = {
219 0x9904, /* insert CRC */
221 0x9908, /* stop writing */
225 static void swim3_select(struct floppy_state
*fs
, int sel
);
226 static void swim3_action(struct floppy_state
*fs
, int action
);
227 static int swim3_readbit(struct floppy_state
*fs
, int bit
);
228 static void do_fd_request(request_queue_t
* q
);
229 static void start_request(struct floppy_state
*fs
);
230 static void set_timeout(struct floppy_state
*fs
, int nticks
,
231 void (*proc
)(unsigned long));
232 static void scan_track(struct floppy_state
*fs
);
233 static void seek_track(struct floppy_state
*fs
, int n
);
234 static void init_dma(struct dbdma_cmd
*cp
, int cmd
, void *buf
, int count
);
235 static void setup_transfer(struct floppy_state
*fs
);
236 static void act(struct floppy_state
*fs
);
237 static void scan_timeout(unsigned long data
);
238 static void seek_timeout(unsigned long data
);
239 static void settle_timeout(unsigned long data
);
240 static void xfer_timeout(unsigned long data
);
241 static irqreturn_t
swim3_interrupt(int irq
, void *dev_id
, struct pt_regs
*regs
);
242 /*static void fd_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs);*/
243 static int grab_drive(struct floppy_state
*fs
, enum swim_state state
,
245 static void release_drive(struct floppy_state
*fs
);
246 static int fd_eject(struct floppy_state
*fs
);
247 static int floppy_ioctl(struct inode
*inode
, struct file
*filp
,
248 unsigned int cmd
, unsigned long param
);
249 static int floppy_open(struct inode
*inode
, struct file
*filp
);
250 static int floppy_release(struct inode
*inode
, struct file
*filp
);
251 static int floppy_check_change(struct gendisk
*disk
);
252 static int floppy_revalidate(struct gendisk
*disk
);
253 static int swim3_add_device(struct device_node
*swims
);
254 int swim3_init(void);
256 #ifndef CONFIG_PMAC_PBOOK
257 #define check_media_bay(which, what) 1
260 static void swim3_select(struct floppy_state
*fs
, int sel
)
262 struct swim3 __iomem
*sw
= fs
->swim3
;
264 out_8(&sw
->select
, RELAX
);
266 out_8(&sw
->control_bis
, SELECT
);
268 out_8(&sw
->control_bic
, SELECT
);
269 out_8(&sw
->select
, sel
& CA_MASK
);
272 static void swim3_action(struct floppy_state
*fs
, int action
)
274 struct swim3 __iomem
*sw
= fs
->swim3
;
276 swim3_select(fs
, action
);
278 out_8(&sw
->select
, sw
->select
| LSTRB
);
280 out_8(&sw
->select
, sw
->select
& ~LSTRB
);
284 static int swim3_readbit(struct floppy_state
*fs
, int bit
)
286 struct swim3 __iomem
*sw
= fs
->swim3
;
289 swim3_select(fs
, bit
);
291 stat
= in_8(&sw
->status
);
292 return (stat
& DATA
) == 0;
295 static void do_fd_request(request_queue_t
* q
)
298 for(i
=0;i
<floppy_count
;i
++)
300 if (floppy_states
[i
].media_bay
&&
301 check_media_bay(floppy_states
[i
].media_bay
, MB_FD
))
303 start_request(&floppy_states
[i
]);
308 static void start_request(struct floppy_state
*fs
)
313 if (fs
->state
== idle
&& fs
->wanted
) {
314 fs
->state
= available
;
318 while (fs
->state
== idle
&& (req
= elv_next_request(swim3_queue
))) {
320 printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%ld buf=%p\n",
321 req
->rq_disk
->disk_name
, req
->cmd
,
322 (long)req
->sector
, req
->nr_sectors
, req
->buffer
);
323 printk(" rq_status=%d errors=%d current_nr_sectors=%ld\n",
324 req
->rq_status
, req
->errors
, req
->current_nr_sectors
);
327 if (req
->sector
< 0 || req
->sector
>= fs
->total_secs
) {
331 if (req
->current_nr_sectors
== 0) {
340 if (rq_data_dir(req
) == WRITE
) {
341 if (fs
->write_prot
< 0)
342 fs
->write_prot
= swim3_readbit(fs
, WRITE_PROT
);
343 if (fs
->write_prot
) {
349 /* Do not remove the cast. req->sector is now a sector_t and
350 * can be 64 bits, but it will never go past 32 bits for this
351 * driver anyway, so we can safely cast it down and not have
352 * to do a 64/32 division
354 fs
->req_cyl
= ((long)req
->sector
) / fs
->secpercyl
;
355 x
= ((long)req
->sector
) % fs
->secpercyl
;
356 fs
->head
= x
/ fs
->secpertrack
;
357 fs
->req_sector
= x
% fs
->secpertrack
+ 1;
359 fs
->state
= do_transfer
;
366 static void set_timeout(struct floppy_state
*fs
, int nticks
,
367 void (*proc
)(unsigned long))
371 save_flags(flags
); cli();
372 if (fs
->timeout_pending
)
373 del_timer(&fs
->timeout
);
374 fs
->timeout
.expires
= jiffies
+ nticks
;
375 fs
->timeout
.function
= proc
;
376 fs
->timeout
.data
= (unsigned long) fs
;
377 add_timer(&fs
->timeout
);
378 fs
->timeout_pending
= 1;
379 restore_flags(flags
);
382 static inline void scan_track(struct floppy_state
*fs
)
384 struct swim3 __iomem
*sw
= fs
->swim3
;
386 swim3_select(fs
, READ_DATA_0
);
387 in_8(&sw
->intr
); /* clear SEEN_SECTOR bit */
389 out_8(&sw
->intr_enable
, SEEN_SECTOR
);
390 out_8(&sw
->control_bis
, DO_ACTION
);
391 /* enable intr when track found */
392 set_timeout(fs
, HZ
, scan_timeout
); /* enable timeout */
395 static inline void seek_track(struct floppy_state
*fs
, int n
)
397 struct swim3 __iomem
*sw
= fs
->swim3
;
400 swim3_action(fs
, SEEK_POSITIVE
);
403 swim3_action(fs
, SEEK_NEGATIVE
);
406 fs
->expect_cyl
= (fs
->cur_cyl
>= 0)? fs
->cur_cyl
+ n
: -1;
407 swim3_select(fs
, STEP
);
409 /* enable intr when seek finished */
410 out_8(&sw
->intr_enable
, SEEK_DONE
);
411 out_8(&sw
->control_bis
, DO_SEEK
);
412 set_timeout(fs
, 3*HZ
, seek_timeout
); /* enable timeout */
416 static inline void init_dma(struct dbdma_cmd
*cp
, int cmd
,
417 void *buf
, int count
)
419 st_le16(&cp
->req_count
, count
);
420 st_le16(&cp
->command
, cmd
);
421 st_le32(&cp
->phy_addr
, virt_to_bus(buf
));
425 static inline void setup_transfer(struct floppy_state
*fs
)
428 struct swim3 __iomem
*sw
= fs
->swim3
;
429 struct dbdma_cmd
*cp
= fs
->dma_cmd
;
430 struct dbdma_regs __iomem
*dr
= fs
->dma
;
432 if (fd_req
->current_nr_sectors
<= 0) {
433 printk(KERN_ERR
"swim3: transfer 0 sectors?\n");
436 if (rq_data_dir(fd_req
) == WRITE
)
439 n
= fs
->secpertrack
- fs
->req_sector
+ 1;
440 if (n
> fd_req
->current_nr_sectors
)
441 n
= fd_req
->current_nr_sectors
;
444 swim3_select(fs
, fs
->head
? READ_DATA_1
: READ_DATA_0
);
445 out_8(&sw
->sector
, fs
->req_sector
);
446 out_8(&sw
->nsect
, n
);
448 out_le32(&dr
->cmdptr
, virt_to_bus(cp
));
449 if (rq_data_dir(fd_req
) == WRITE
) {
450 /* Set up 3 dma commands: write preamble, data, postamble */
451 init_dma(cp
, OUTPUT_MORE
, write_preamble
, sizeof(write_preamble
));
453 init_dma(cp
, OUTPUT_MORE
, fd_req
->buffer
, 512);
455 init_dma(cp
, OUTPUT_LAST
, write_postamble
, sizeof(write_postamble
));
457 init_dma(cp
, INPUT_LAST
, fd_req
->buffer
, n
* 512);
460 out_le16(&cp
->command
, DBDMA_STOP
);
461 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
463 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
464 if (rq_data_dir(fd_req
) == WRITE
)
465 out_8(&sw
->control_bis
, WRITE_SECTORS
);
467 out_le32(&dr
->control
, (RUN
<< 16) | RUN
);
468 /* enable intr when transfer complete */
469 out_8(&sw
->intr_enable
, TRANSFER_DONE
);
470 out_8(&sw
->control_bis
, DO_ACTION
);
471 set_timeout(fs
, 2*HZ
, xfer_timeout
); /* enable timeout */
474 static void act(struct floppy_state
*fs
)
479 return; /* XXX shouldn't get here */
482 if (swim3_readbit(fs
, TRACK_ZERO
)) {
484 if (fs
->req_cyl
== 0)
485 fs
->state
= do_transfer
;
494 if (fs
->cur_cyl
< 0) {
496 fs
->state
= locating
;
499 if (fs
->req_cyl
== fs
->cur_cyl
) {
500 printk("whoops, seeking 0\n");
501 fs
->state
= do_transfer
;
504 seek_track(fs
, fs
->req_cyl
- fs
->cur_cyl
);
508 /* check for SEEK_COMPLETE after 30ms */
509 fs
->settle_time
= (HZ
+ 32) / 33;
510 set_timeout(fs
, fs
->settle_time
, settle_timeout
);
514 if (fs
->cur_cyl
!= fs
->req_cyl
) {
515 if (fs
->retries
> 5) {
516 end_request(fd_req
, 0);
531 printk(KERN_ERR
"swim3: unknown state %d\n", fs
->state
);
537 static void scan_timeout(unsigned long data
)
539 struct floppy_state
*fs
= (struct floppy_state
*) data
;
540 struct swim3 __iomem
*sw
= fs
->swim3
;
542 fs
->timeout_pending
= 0;
543 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
544 out_8(&sw
->select
, RELAX
);
545 out_8(&sw
->intr_enable
, 0);
547 if (fs
->retries
> 5) {
548 end_request(fd_req
, 0);
557 static void seek_timeout(unsigned long data
)
559 struct floppy_state
*fs
= (struct floppy_state
*) data
;
560 struct swim3 __iomem
*sw
= fs
->swim3
;
562 fs
->timeout_pending
= 0;
563 out_8(&sw
->control_bic
, DO_SEEK
);
564 out_8(&sw
->select
, RELAX
);
565 out_8(&sw
->intr_enable
, 0);
566 printk(KERN_ERR
"swim3: seek timeout\n");
567 end_request(fd_req
, 0);
572 static void settle_timeout(unsigned long data
)
574 struct floppy_state
*fs
= (struct floppy_state
*) data
;
575 struct swim3 __iomem
*sw
= fs
->swim3
;
577 fs
->timeout_pending
= 0;
578 if (swim3_readbit(fs
, SEEK_COMPLETE
)) {
579 out_8(&sw
->select
, RELAX
);
580 fs
->state
= locating
;
584 out_8(&sw
->select
, RELAX
);
585 if (fs
->settle_time
< 2*HZ
) {
587 set_timeout(fs
, 1, settle_timeout
);
590 printk(KERN_ERR
"swim3: seek settle timeout\n");
591 end_request(fd_req
, 0);
596 static void xfer_timeout(unsigned long data
)
598 struct floppy_state
*fs
= (struct floppy_state
*) data
;
599 struct swim3 __iomem
*sw
= fs
->swim3
;
600 struct dbdma_regs __iomem
*dr
= fs
->dma
;
601 struct dbdma_cmd
*cp
= fs
->dma_cmd
;
605 fs
->timeout_pending
= 0;
606 out_le32(&dr
->control
, RUN
<< 16);
607 /* We must wait a bit for dbdma to stop */
608 for (n
= 0; (in_le32(&dr
->status
) & ACTIVE
) && n
< 1000; n
++)
610 out_8(&sw
->intr_enable
, 0);
611 out_8(&sw
->control_bic
, WRITE_SECTORS
| DO_ACTION
);
612 out_8(&sw
->select
, RELAX
);
613 if (rq_data_dir(fd_req
) == WRITE
)
615 if (ld_le16(&cp
->xfer_status
) != 0)
616 s
= fs
->scount
- ((ld_le16(&cp
->res_count
) + 511) >> 9);
620 fd_req
->current_nr_sectors
-= s
;
621 printk(KERN_ERR
"swim3: timeout %sing sector %ld\n",
622 (rq_data_dir(fd_req
)==WRITE
? "writ": "read"), (long)fd_req
->sector
);
623 end_request(fd_req
, 0);
628 static irqreturn_t
swim3_interrupt(int irq
, void *dev_id
, struct pt_regs
*regs
)
630 struct floppy_state
*fs
= (struct floppy_state
*) dev_id
;
631 struct swim3 __iomem
*sw
= fs
->swim3
;
634 struct dbdma_regs __iomem
*dr
;
635 struct dbdma_cmd
*cp
;
637 intr
= in_8(&sw
->intr
);
638 err
= (intr
& ERROR_INTR
)? in_8(&sw
->error
): 0;
639 if ((intr
& ERROR_INTR
) && fs
->state
!= do_transfer
)
640 printk(KERN_ERR
"swim3_interrupt, state=%d, dir=%lx, intr=%x, err=%x\n",
641 fs
->state
, rq_data_dir(fd_req
), intr
, err
);
644 if (intr
& SEEN_SECTOR
) {
645 out_8(&sw
->control_bic
, DO_ACTION
| WRITE_SECTORS
);
646 out_8(&sw
->select
, RELAX
);
647 out_8(&sw
->intr_enable
, 0);
648 del_timer(&fs
->timeout
);
649 fs
->timeout_pending
= 0;
650 if (sw
->ctrack
== 0xff) {
651 printk(KERN_ERR
"swim3: seen sector but cyl=ff?\n");
653 if (fs
->retries
> 5) {
654 end_request(fd_req
, 0);
663 fs
->cur_cyl
= sw
->ctrack
;
664 fs
->cur_sector
= sw
->csect
;
665 if (fs
->expect_cyl
!= -1 && fs
->expect_cyl
!= fs
->cur_cyl
)
666 printk(KERN_ERR
"swim3: expected cyl %d, got %d\n",
667 fs
->expect_cyl
, fs
->cur_cyl
);
668 fs
->state
= do_transfer
;
674 if (sw
->nseek
== 0) {
675 out_8(&sw
->control_bic
, DO_SEEK
);
676 out_8(&sw
->select
, RELAX
);
677 out_8(&sw
->intr_enable
, 0);
678 del_timer(&fs
->timeout
);
679 fs
->timeout_pending
= 0;
680 if (fs
->state
== seeking
)
682 fs
->state
= settling
;
687 out_8(&sw
->intr_enable
, 0);
688 del_timer(&fs
->timeout
);
689 fs
->timeout_pending
= 0;
693 if ((intr
& (ERROR_INTR
| TRANSFER_DONE
)) == 0)
695 out_8(&sw
->intr_enable
, 0);
696 out_8(&sw
->control_bic
, WRITE_SECTORS
| DO_ACTION
);
697 out_8(&sw
->select
, RELAX
);
698 del_timer(&fs
->timeout
);
699 fs
->timeout_pending
= 0;
702 if (rq_data_dir(fd_req
) == WRITE
)
705 * Check that the main data transfer has finished.
706 * On writing, the swim3 sometimes doesn't use
707 * up all the bytes of the postamble, so we can still
708 * see DMA active here. That doesn't matter as long
709 * as all the sector data has been transferred.
711 if ((intr
& ERROR_INTR
) == 0 && cp
->xfer_status
== 0) {
712 /* wait a little while for DMA to complete */
713 for (n
= 0; n
< 100; ++n
) {
714 if (cp
->xfer_status
!= 0)
721 out_le32(&dr
->control
, (RUN
| PAUSE
) << 16);
722 stat
= ld_le16(&cp
->xfer_status
);
723 resid
= ld_le16(&cp
->res_count
);
724 if (intr
& ERROR_INTR
) {
725 n
= fs
->scount
- 1 - resid
/ 512;
728 fd_req
->current_nr_sectors
-= n
;
729 fd_req
->buffer
+= n
* 512;
732 if (fs
->retries
< 5) {
736 printk("swim3: error %sing block %ld (err=%x)\n",
737 rq_data_dir(fd_req
) == WRITE
? "writ": "read",
738 (long)fd_req
->sector
, err
);
739 end_request(fd_req
, 0);
743 if ((stat
& ACTIVE
) == 0 || resid
!= 0) {
744 /* musta been an error */
745 printk(KERN_ERR
"swim3: fd dma: stat=%x resid=%d\n", stat
, resid
);
746 printk(KERN_ERR
" state=%d, dir=%lx, intr=%x, err=%x\n",
747 fs
->state
, rq_data_dir(fd_req
), intr
, err
);
748 end_request(fd_req
, 0);
753 fd_req
->sector
+= fs
->scount
;
754 fd_req
->current_nr_sectors
-= fs
->scount
;
755 fd_req
->buffer
+= fs
->scount
* 512;
756 if (fd_req
->current_nr_sectors
<= 0) {
757 end_request(fd_req
, 1);
760 fs
->req_sector
+= fs
->scount
;
761 if (fs
->req_sector
> fs
->secpertrack
) {
762 fs
->req_sector
-= fs
->secpertrack
;
763 if (++fs
->head
> 1) {
771 if (fs
->state
== idle
)
775 printk(KERN_ERR
"swim3: don't know what to do in state %d\n", fs
->state
);
781 static void fd_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
786 static int grab_drive(struct floppy_state
*fs
, enum swim_state state
,
793 if (fs
->state
!= idle
) {
795 while (fs
->state
!= available
) {
796 if (interruptible
&& signal_pending(current
)) {
798 restore_flags(flags
);
801 interruptible_sleep_on(&fs
->wait
);
806 restore_flags(flags
);
810 static void release_drive(struct floppy_state
*fs
)
818 restore_flags(flags
);
821 static int fd_eject(struct floppy_state
*fs
)
825 err
= grab_drive(fs
, ejecting
, 1);
828 swim3_action(fs
, EJECT
);
829 for (n
= 20; n
> 0; --n
) {
830 if (signal_pending(current
)) {
834 swim3_select(fs
, RELAX
);
835 current
->state
= TASK_INTERRUPTIBLE
;
837 if (swim3_readbit(fs
, DISK_IN
) == 0)
840 swim3_select(fs
, RELAX
);
847 static struct floppy_struct floppy_type
=
848 { 2880,18,2,80,0,0x1B,0x00,0xCF,0x6C,NULL
}; /* 7 1.44MB 3.5" */
850 static int floppy_ioctl(struct inode
*inode
, struct file
*filp
,
851 unsigned int cmd
, unsigned long param
)
853 struct floppy_state
*fs
= inode
->i_bdev
->bd_disk
->private_data
;
856 if ((cmd
& 0x80) && !capable(CAP_SYS_ADMIN
))
859 if (fs
->media_bay
&& check_media_bay(fs
->media_bay
, MB_FD
))
864 if (fs
->ref_count
!= 1)
869 if (copy_to_user((void __user
*) param
, &floppy_type
,
870 sizeof(struct floppy_struct
)))
877 static int floppy_open(struct inode
*inode
, struct file
*filp
)
879 struct floppy_state
*fs
= inode
->i_bdev
->bd_disk
->private_data
;
880 struct swim3 __iomem
*sw
= fs
->swim3
;
883 if (fs
->ref_count
== 0) {
884 if (fs
->media_bay
&& check_media_bay(fs
->media_bay
, MB_FD
))
886 out_8(&sw
->setup
, S_IBM_DRIVE
| S_FCLK_DIV2
);
887 out_8(&sw
->control_bic
, 0xff);
888 out_8(&sw
->mode
, 0x95);
890 out_8(&sw
->intr_enable
, 0);
891 out_8(&sw
->control_bis
, DRIVE_ENABLE
| INTR_ENABLE
);
892 swim3_action(fs
, MOTOR_ON
);
895 for (n
= 0; n
< 2 * HZ
; ++n
) {
896 if (n
>= HZ
/30 && swim3_readbit(fs
, SEEK_COMPLETE
))
898 if (signal_pending(current
)) {
902 swim3_select(fs
, RELAX
);
903 current
->state
= TASK_INTERRUPTIBLE
;
906 if (err
== 0 && (swim3_readbit(fs
, SEEK_COMPLETE
) == 0
907 || swim3_readbit(fs
, DISK_IN
) == 0))
909 swim3_action(fs
, SETMFM
);
910 swim3_select(fs
, RELAX
);
912 } else if (fs
->ref_count
== -1 || filp
->f_flags
& O_EXCL
)
915 if (err
== 0 && (filp
->f_flags
& O_NDELAY
) == 0
916 && (filp
->f_mode
& 3)) {
917 check_disk_change(inode
->i_bdev
);
922 if (err
== 0 && (filp
->f_mode
& 2)) {
923 if (fs
->write_prot
< 0)
924 fs
->write_prot
= swim3_readbit(fs
, WRITE_PROT
);
930 if (fs
->ref_count
== 0) {
931 swim3_action(fs
, MOTOR_OFF
);
932 out_8(&sw
->control_bic
, DRIVE_ENABLE
| INTR_ENABLE
);
933 swim3_select(fs
, RELAX
);
938 if (filp
->f_flags
& O_EXCL
)
946 static int floppy_release(struct inode
*inode
, struct file
*filp
)
948 struct floppy_state
*fs
= inode
->i_bdev
->bd_disk
->private_data
;
949 struct swim3 __iomem
*sw
= fs
->swim3
;
950 if (fs
->ref_count
> 0 && --fs
->ref_count
== 0) {
951 swim3_action(fs
, MOTOR_OFF
);
952 out_8(&sw
->control_bic
, 0xff);
953 swim3_select(fs
, RELAX
);
958 static int floppy_check_change(struct gendisk
*disk
)
960 struct floppy_state
*fs
= disk
->private_data
;
964 static int floppy_revalidate(struct gendisk
*disk
)
966 struct floppy_state
*fs
= disk
->private_data
;
967 struct swim3 __iomem
*sw
;
970 if (fs
->media_bay
&& check_media_bay(fs
->media_bay
, MB_FD
))
974 grab_drive(fs
, revalidating
, 0);
975 out_8(&sw
->intr_enable
, 0);
976 out_8(&sw
->control_bis
, DRIVE_ENABLE
);
977 swim3_action(fs
, MOTOR_ON
); /* necessary? */
981 for (n
= HZ
; n
> 0; --n
) {
982 if (swim3_readbit(fs
, SEEK_COMPLETE
))
984 if (signal_pending(current
))
986 swim3_select(fs
, RELAX
);
987 current
->state
= TASK_INTERRUPTIBLE
;
990 ret
= swim3_readbit(fs
, SEEK_COMPLETE
) == 0
991 || swim3_readbit(fs
, DISK_IN
) == 0;
993 swim3_action(fs
, MOTOR_OFF
);
996 swim3_action(fs
, SETMFM
);
998 swim3_select(fs
, RELAX
);
1004 static struct block_device_operations floppy_fops
= {
1005 .open
= floppy_open
,
1006 .release
= floppy_release
,
1007 .ioctl
= floppy_ioctl
,
1008 .media_changed
= floppy_check_change
,
1009 .revalidate_disk
= floppy_revalidate
,
1012 int swim3_init(void)
1014 struct device_node
*swim
;
1018 devfs_mk_dir("floppy");
1020 swim
= find_devices("floppy");
1021 while (swim
&& (floppy_count
< MAX_FLOPPIES
))
1023 swim3_add_device(swim
);
1027 swim
= find_devices("swim3");
1028 while (swim
&& (floppy_count
< MAX_FLOPPIES
))
1030 swim3_add_device(swim
);
1037 for (i
= 0; i
< floppy_count
; i
++) {
1038 disks
[i
] = alloc_disk(1);
1043 if (register_blkdev(FLOPPY_MAJOR
, "fd")) {
1048 swim3_queue
= blk_init_queue(do_fd_request
, &swim3_lock
);
1054 for (i
= 0; i
< floppy_count
; i
++) {
1055 struct gendisk
*disk
= disks
[i
];
1056 disk
->major
= FLOPPY_MAJOR
;
1057 disk
->first_minor
= i
;
1058 disk
->fops
= &floppy_fops
;
1059 disk
->private_data
= &floppy_states
[i
];
1060 disk
->queue
= swim3_queue
;
1061 disk
->flags
|= GENHD_FL_REMOVABLE
;
1062 sprintf(disk
->disk_name
, "fd%d", i
);
1063 sprintf(disk
->devfs_name
, "floppy/%d", i
);
1064 set_capacity(disk
, 2880);
1070 unregister_blkdev(FLOPPY_MAJOR
, "fd");
1074 /* shouldn't we do something with results of swim_add_device()? */
1078 static int swim3_add_device(struct device_node
*swim
)
1080 struct device_node
*mediabay
;
1081 struct floppy_state
*fs
= &floppy_states
[floppy_count
];
1083 if (swim
->n_addrs
< 2)
1085 printk(KERN_INFO
"swim3: expecting 2 addrs (n_addrs:%d, n_intrs:%d)\n",
1086 swim
->n_addrs
, swim
->n_intrs
);
1090 if (swim
->n_intrs
< 2)
1092 printk(KERN_INFO
"swim3: expecting 2 intrs (n_addrs:%d, n_intrs:%d)\n",
1093 swim
->n_addrs
, swim
->n_intrs
);
1097 if (!request_OF_resource(swim
, 0, NULL
)) {
1098 printk(KERN_INFO
"swim3: can't request IO resource !\n");
1102 mediabay
= (strcasecmp(swim
->parent
->type
, "media-bay") == 0) ? swim
->parent
: NULL
;
1103 if (mediabay
== NULL
)
1104 pmac_call_feature(PMAC_FTR_SWIM3_ENABLE
, swim
, 0, 1);
1106 memset(fs
, 0, sizeof(*fs
));
1108 fs
->swim3
= (struct swim3 __iomem
*)
1109 ioremap(swim
->addrs
[0].address
, 0x200);
1110 fs
->dma
= (struct dbdma_regs __iomem
*)
1111 ioremap(swim
->addrs
[1].address
, 0x200);
1112 fs
->swim3_intr
= swim
->intrs
[0].line
;
1113 fs
->dma_intr
= swim
->intrs
[1].line
;
1115 fs
->cur_sector
= -1;
1117 fs
->secpertrack
= 18;
1118 fs
->total_secs
= 2880;
1119 fs
->media_bay
= mediabay
;
1120 init_waitqueue_head(&fs
->wait
);
1122 fs
->dma_cmd
= (struct dbdma_cmd
*) DBDMA_ALIGN(fs
->dbdma_cmd_space
);
1123 memset(fs
->dma_cmd
, 0, 2 * sizeof(struct dbdma_cmd
));
1124 st_le16(&fs
->dma_cmd
[1].command
, DBDMA_STOP
);
1126 if (request_irq(fs
->swim3_intr
, swim3_interrupt
, 0, "SWIM3", fs
)) {
1127 printk(KERN_ERR
"Couldn't get irq %d for SWIM3\n", fs
->swim3_intr
);
1128 pmac_call_feature(PMAC_FTR_SWIM3_ENABLE
, swim
, 0, 0);
1132 if (request_irq(fs->dma_intr, fd_dma_interrupt, 0, "SWIM3-dma", fs)) {
1133 printk(KERN_ERR "Couldn't get irq %d for SWIM3 DMA",
1135 pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0);
1140 init_timer(&fs
->timeout
);
1142 printk(KERN_INFO
"fd%d: SWIM3 floppy controller %s\n", floppy_count
,
1143 mediabay
? "in media bay" : "");
1150 module_init(swim3_init
)
1152 MODULE_LICENSE("GPL");
1153 MODULE_AUTHOR("Paul Mackerras");
1154 MODULE_ALIAS_BLOCKDEV_MAJOR(FLOPPY_MAJOR
);