?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
netfilter: xtables: stackptr should be percpu
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / macintosh / therm_adt746x.c
blob16d82f17ae82b3a2e0f5a5e37a0a73e18e51e7b5
1 /*
2 * Device driver for the i2c thermostat found on the iBook G4, Albook G4
3 *
4 * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt
5 *
6 * Documentation from
7 * http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf
8 * http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf
9 *
10 */
11
12 #include <linux/types.h>
13 #include <linux/module.h>
14 #include <linux/errno.h>
15 #include <linux/kernel.h>
16 #include <linux/delay.h>
17 #include <linux/sched.h>
18 #include <linux/i2c.h>
19 #include <linux/slab.h>
20 #include <linux/init.h>
21 #include <linux/spinlock.h>
22 #include <linux/wait.h>
23 #include <linux/suspend.h>
24 #include <linux/kthread.h>
25 #include <linux/moduleparam.h>
26 #include <linux/freezer.h>
27 #include <linux/of_platform.h>
28
29 #include <asm/prom.h>
30 #include <asm/machdep.h>
31 #include <asm/io.h>
32 #include <asm/system.h>
33 #include <asm/sections.h>
34
35 #undef DEBUG
36
37 #define CONFIG_REG 0x40
38 #define MANUAL_MASK 0xe0
39 #define AUTO_MASK 0x20
40 #define INVERT_MASK 0x10
41
42 static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */
43 static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */
44 static u8 MANUAL_MODE[2] = {0x5c, 0x5d};
45 static u8 REM_CONTROL[2] = {0x00, 0x40};
46 static u8 FAN_SPEED[2] = {0x28, 0x2a};
47 static u8 FAN_SPD_SET[2] = {0x30, 0x31};
48
49 static u8 default_limits_local[3] = {70, 50, 70}; /* local, sensor1, sensor2 */
50 static u8 default_limits_chip[3] = {80, 65, 80}; /* local, sensor1, sensor2 */
51 static const char *sensor_location[3];
52
53 static int limit_adjust;
54 static int fan_speed = -1;
55 static int verbose;
56
57 MODULE_AUTHOR("Colin Leroy <colin@colino.net>");
58 MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and "
59 "Powerbook G4 Alu");
60 MODULE_LICENSE("GPL");
61
62 module_param(limit_adjust, int, 0644);
63 MODULE_PARM_DESC(limit_adjust,"Adjust maximum temperatures (50 sensor1, 70 sensor2) "
64 "by N degrees.");
65
66 module_param(fan_speed, int, 0644);
67 MODULE_PARM_DESC(fan_speed,"Specify starting fan speed (0-255) "
68 "(default 64)");
69
70 module_param(verbose, bool, 0);
71 MODULE_PARM_DESC(verbose,"Verbose log operations "
72 "(default 0)");
73
74 struct thermostat {
75 struct i2c_client *clt;
76 u8 temps[3];
77 u8 cached_temp[3];
78 u8 initial_limits[3];
79 u8 limits[3];
80 int last_speed[2];
81 int last_var[2];
82 int pwm_inv[2];
83 };
84
85 static enum {ADT7460, ADT7467} therm_type;
86 static int therm_bus, therm_address;
87 static struct of_device * of_dev;
88 static struct thermostat* thermostat;
89 static struct task_struct *thread_therm = NULL;
90
91 static void write_both_fan_speed(struct thermostat *th, int speed);
92 static void write_fan_speed(struct thermostat *th, int speed, int fan);
93 static void thermostat_create_files(void);
94 static void thermostat_remove_files(void);
95
96 static int
97 write_reg(struct thermostat* th, int reg, u8 data)
98 {
99 u8 tmp[2];
100 int rc;
101
102 tmp[0] = reg;
103 tmp[1] = data;
104 rc = i2c_master_send(th->clt, (const char *)tmp, 2);
105 if (rc < 0)
106 return rc;
107 if (rc != 2)
108 return -ENODEV;
109 return 0;
110 }
111
112 static int
113 read_reg(struct thermostat* th, int reg)
114 {
115 u8 reg_addr, data;
116 int rc;
117
118 reg_addr = (u8)reg;
119 rc = i2c_master_send(th->clt, &reg_addr, 1);
120 if (rc < 0)
121 return rc;
122 if (rc != 1)
123 return -ENODEV;
124 rc = i2c_master_recv(th->clt, (char *)&data, 1);
125 if (rc < 0)
126 return rc;
127 return data;
128 }
129
130 static struct i2c_driver thermostat_driver;
131
132 static int
133 attach_thermostat(struct i2c_adapter *adapter)
134 {
135 unsigned long bus_no;
136 struct i2c_board_info info;
137 struct i2c_client *client;
138
139 if (strncmp(adapter->name, "uni-n", 5))
140 return -ENODEV;
141 bus_no = simple_strtoul(adapter->name + 6, NULL, 10);
142 if (bus_no != therm_bus)
143 return -ENODEV;
144
145 memset(&info, 0, sizeof(struct i2c_board_info));
146 strlcpy(info.type, "therm_adt746x", I2C_NAME_SIZE);
147 info.addr = therm_address;
148 client = i2c_new_device(adapter, &info);
149 if (!client)
150 return -ENODEV;
151
152 /*
153 * Let i2c-core delete that device on driver removal.
154 * This is safe because i2c-core holds the core_lock mutex for us.
155 */
156 list_add_tail(&client->detected, &thermostat_driver.clients);
157 return 0;
158 }
159
160 static int
161 remove_thermostat(struct i2c_client *client)
162 {
163 struct thermostat *th = i2c_get_clientdata(client);
164 int i;
165
166 thermostat_remove_files();
167
168 if (thread_therm != NULL) {
169 kthread_stop(thread_therm);
170 }
171
172 printk(KERN_INFO "adt746x: Putting max temperatures back from "
173 "%d, %d, %d to %d, %d, %d\n",
174 th->limits[0], th->limits[1], th->limits[2],
175 th->initial_limits[0], th->initial_limits[1],
176 th->initial_limits[2]);
177
178 for (i = 0; i < 3; i++)
179 write_reg(th, LIMIT_REG[i], th->initial_limits[i]);
180
181 write_both_fan_speed(th, -1);
182
183 thermostat = NULL;
184
185 i2c_set_clientdata(client, NULL);
186 kfree(th);
187
188 return 0;
189 }
190
191 static int read_fan_speed(struct thermostat *th, u8 addr)
192 {
193 u8 tmp[2];
194 u16 res;
195
196 /* should start with low byte */
197 tmp[1] = read_reg(th, addr);
198 tmp[0] = read_reg(th, addr + 1);
199
200 res = tmp[1] + (tmp[0] << 8);
201 /* "a value of 0xffff means that the fan has stopped" */
202 return (res == 0xffff ? 0 : (90000*60)/res);
203 }
204
205 static void write_both_fan_speed(struct thermostat *th, int speed)
206 {
207 write_fan_speed(th, speed, 0);
208 if (therm_type == ADT7460)
209 write_fan_speed(th, speed, 1);
210 }
211
212 static void write_fan_speed(struct thermostat *th, int speed, int fan)
213 {
214 u8 manual;
215
216 if (speed > 0xff)
217 speed = 0xff;
218 else if (speed < -1)
219 speed = 0;
220
221 if (therm_type == ADT7467 && fan == 1)
222 return;
223
224 if (th->last_speed[fan] != speed) {
225 if (verbose) {
226 if (speed == -1)
227 printk(KERN_DEBUG "adt746x: Setting speed to automatic "
228 "for %s fan.\n", sensor_location[fan+1]);
229 else
230 printk(KERN_DEBUG "adt746x: Setting speed to %d "
231 "for %s fan.\n", speed, sensor_location[fan+1]);
232 }
233 } else
234 return;
235
236 if (speed >= 0) {
237 manual = read_reg(th, MANUAL_MODE[fan]);
238 manual &= ~INVERT_MASK;
239 write_reg(th, MANUAL_MODE[fan],
240 manual | MANUAL_MASK | th->pwm_inv[fan]);
241 write_reg(th, FAN_SPD_SET[fan], speed);
242 } else {
243 /* back to automatic */
244 if(therm_type == ADT7460) {
245 manual = read_reg(th,
246 MANUAL_MODE[fan]) & (~MANUAL_MASK);
247 manual &= ~INVERT_MASK;
248 manual |= th->pwm_inv[fan];
249 write_reg(th,
250 MANUAL_MODE[fan], manual|REM_CONTROL[fan]);
251 } else {
252 manual = read_reg(th, MANUAL_MODE[fan]);
253 manual &= ~INVERT_MASK;
254 manual |= th->pwm_inv[fan];
255 write_reg(th, MANUAL_MODE[fan], manual&(~AUTO_MASK));
256 }
257 }
258
259 th->last_speed[fan] = speed;
260 }
261
262 static void read_sensors(struct thermostat *th)
263 {
264 int i = 0;
265
266 for (i = 0; i < 3; i++)
267 th->temps[i] = read_reg(th, TEMP_REG[i]);
268 }
269
270 #ifdef DEBUG
271 static void display_stats(struct thermostat *th)
272 {
273 if (th->temps[0] != th->cached_temp[0]
274 || th->temps[1] != th->cached_temp[1]
275 || th->temps[2] != th->cached_temp[2]) {
276 printk(KERN_INFO "adt746x: Temperature infos:"
277 " thermostats: %d,%d,%d;"
278 " limits: %d,%d,%d;"
279 " fan speed: %d RPM\n",
280 th->temps[0], th->temps[1], th->temps[2],
281 th->limits[0], th->limits[1], th->limits[2],
282 read_fan_speed(th, FAN_SPEED[0]));
283 }
284 th->cached_temp[0] = th->temps[0];
285 th->cached_temp[1] = th->temps[1];
286 th->cached_temp[2] = th->temps[2];
287 }
288 #endif
289
290 static void update_fans_speed (struct thermostat *th)
291 {
292 int lastvar = 0; /* last variation, for iBook */
293 int i = 0;
294
295 /* we don't care about local sensor, so we start at sensor 1 */
296 for (i = 1; i < 3; i++) {
297 int started = 0;
298 int fan_number = (therm_type == ADT7460 && i == 2);
299 int var = th->temps[i] - th->limits[i];
300
301 if (var > -1) {
302 int step = (255 - fan_speed) / 7;
303 int new_speed = 0;
304
305 /* hysteresis : change fan speed only if variation is
306 * more than two degrees */
307 if (abs(var - th->last_var[fan_number]) < 2)
308 continue;
309
310 started = 1;
311 new_speed = fan_speed + ((var-1)*step);
312
313 if (new_speed < fan_speed)
314 new_speed = fan_speed;
315 if (new_speed > 255)
316 new_speed = 255;
317
318 if (verbose)
319 printk(KERN_DEBUG "adt746x: Setting fans speed to %d "
320 "(limit exceeded by %d on %s)\n",
321 new_speed, var,
322 sensor_location[fan_number+1]);
323 write_both_fan_speed(th, new_speed);
324 th->last_var[fan_number] = var;
325 } else if (var < -2) {
326 /* don't stop fan if sensor2 is cold and sensor1 is not
327 * so cold (lastvar >= -1) */
328 if (i == 2 && lastvar < -1) {
329 if (th->last_speed[fan_number] != 0)
330 if (verbose)
331 printk(KERN_DEBUG "adt746x: Stopping "
332 "fans.\n");
333 write_both_fan_speed(th, 0);
334 }
335 }
336
337 lastvar = var;
338
339 if (started)
340 return; /* we don't want to re-stop the fan
341 * if sensor1 is heating and sensor2 is not */
342 }
343 }
344
345 static int monitor_task(void *arg)
346 {
347 struct thermostat* th = arg;
348
349 set_freezable();
350 while(!kthread_should_stop()) {
351 try_to_freeze();
352 msleep_interruptible(2000);
353
354 #ifndef DEBUG
355 if (fan_speed != -1)
356 read_sensors(th);
357 #else
358 read_sensors(th);
359 #endif
360
361 if (fan_speed != -1)
362 update_fans_speed(th);
363
364 #ifdef DEBUG
365 display_stats(th);
366 #endif
367
368 }
369
370 return 0;
371 }
372
373 static void set_limit(struct thermostat *th, int i)
374 {
375 /* Set sensor1 limit higher to avoid powerdowns */
376 th->limits[i] = default_limits_chip[i] + limit_adjust;
377 write_reg(th, LIMIT_REG[i], th->limits[i]);
378
379 /* set our limits to normal */
380 th->limits[i] = default_limits_local[i] + limit_adjust;
381 }
382
383 static int probe_thermostat(struct i2c_client *client,
384 const struct i2c_device_id *id)
385 {
386 struct thermostat* th;
387 int rc;
388 int i;
389
390 if (thermostat)
391 return 0;
392
393 th = kzalloc(sizeof(struct thermostat), GFP_KERNEL);
394 if (!th)
395 return -ENOMEM;
396
397 i2c_set_clientdata(client, th);
398 th->clt = client;
399
400 rc = read_reg(th, CONFIG_REG);
401 if (rc < 0) {
402 dev_err(&client->dev, "Thermostat failed to read config!\n");
403 i2c_set_clientdata(client, NULL);
404 kfree(th);
405 return -ENODEV;
406 }
407
408 /* force manual control to start the fan quieter */
409 if (fan_speed == -1)
410 fan_speed = 64;
411
412 if(therm_type == ADT7460) {
413 printk(KERN_INFO "adt746x: ADT7460 initializing\n");
414 /* The 7460 needs to be started explicitly */
415 write_reg(th, CONFIG_REG, 1);
416 } else
417 printk(KERN_INFO "adt746x: ADT7467 initializing\n");
418
419 for (i = 0; i < 3; i++) {
420 th->initial_limits[i] = read_reg(th, LIMIT_REG[i]);
421 set_limit(th, i);
422 }
423
424 printk(KERN_INFO "adt746x: Lowering max temperatures from %d, %d, %d"
425 " to %d, %d, %d\n",
426 th->initial_limits[0], th->initial_limits[1],
427 th->initial_limits[2], th->limits[0], th->limits[1],
428 th->limits[2]);
429
430 thermostat = th;
431
432 /* record invert bit status because fw can corrupt it after suspend */
433 th->pwm_inv[0] = read_reg(th, MANUAL_MODE[0]) & INVERT_MASK;
434 th->pwm_inv[1] = read_reg(th, MANUAL_MODE[1]) & INVERT_MASK;
435
436 /* be sure to really write fan speed the first time */
437 th->last_speed[0] = -2;
438 th->last_speed[1] = -2;
439 th->last_var[0] = -80;
440 th->last_var[1] = -80;
441
442 if (fan_speed != -1) {
443 /* manual mode, stop fans */
444 write_both_fan_speed(th, 0);
445 } else {
446 /* automatic mode */
447 write_both_fan_speed(th, -1);
448 }
449
450 thread_therm = kthread_run(monitor_task, th, "kfand");
451
452 if (thread_therm == ERR_PTR(-ENOMEM)) {
453 printk(KERN_INFO "adt746x: Kthread creation failed\n");
454 thread_therm = NULL;
455 return -ENOMEM;
456 }
457
458 thermostat_create_files();
459
460 return 0;
461 }
462
463 static const struct i2c_device_id therm_adt746x_id[] = {
464 { "therm_adt746x", 0 },
465 { }
466 };
467
468 static struct i2c_driver thermostat_driver = {
469 .driver = {
470 .name = "therm_adt746x",
471 },
472 .attach_adapter = attach_thermostat,
473 .probe = probe_thermostat,
474 .remove = remove_thermostat,
475 .id_table = therm_adt746x_id,
476 };
477
478 /*
479 * Now, unfortunately, sysfs doesn't give us a nice void * we could
480 * pass around to the attribute functions, so we don't really have
481 * choice but implement a bunch of them...
482 *
483 * FIXME, it does now...
484 */
485 #define BUILD_SHOW_FUNC_INT(name, data) \
486 static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
487 { \
488 return sprintf(buf, "%d\n", data); \
489 }
490
491 #define BUILD_SHOW_FUNC_STR(name, data) \
492 static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
493 { \
494 return sprintf(buf, "%s\n", data); \
495 }
496
497 #define BUILD_SHOW_FUNC_FAN(name, data) \
498 static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
499 { \
500 return sprintf(buf, "%d (%d rpm)\n", \
501 thermostat->last_speed[data], \
502 read_fan_speed(thermostat, FAN_SPEED[data]) \
503 ); \
504 }
505
506 #define BUILD_STORE_FUNC_DEG(name, data) \
507 static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \
508 { \
509 int val; \
510 int i; \
511 val = simple_strtol(buf, NULL, 10); \
512 printk(KERN_INFO "Adjusting limits by %d degrees\n", val); \
513 limit_adjust = val; \
514 for (i=0; i < 3; i++) \
515 set_limit(thermostat, i); \
516 return n; \
517 }
518
519 #define BUILD_STORE_FUNC_INT(name, data) \
520 static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \
521 { \
522 int val; \
523 val = simple_strtol(buf, NULL, 10); \
524 if (val < 0 || val > 255) \
525 return -EINVAL; \
526 printk(KERN_INFO "Setting specified fan speed to %d\n", val); \
527 data = val; \
528 return n; \
529 }
530
531 BUILD_SHOW_FUNC_INT(sensor1_temperature, (read_reg(thermostat, TEMP_REG[1])))
532 BUILD_SHOW_FUNC_INT(sensor2_temperature, (read_reg(thermostat, TEMP_REG[2])))
533 BUILD_SHOW_FUNC_INT(sensor1_limit, thermostat->limits[1])
534 BUILD_SHOW_FUNC_INT(sensor2_limit, thermostat->limits[2])
535 BUILD_SHOW_FUNC_STR(sensor1_location, sensor_location[1])
536 BUILD_SHOW_FUNC_STR(sensor2_location, sensor_location[2])
537
538 BUILD_SHOW_FUNC_INT(specified_fan_speed, fan_speed)
539 BUILD_SHOW_FUNC_FAN(sensor1_fan_speed, 0)
540 BUILD_SHOW_FUNC_FAN(sensor2_fan_speed, 1)
541
542 BUILD_STORE_FUNC_INT(specified_fan_speed,fan_speed)
543 BUILD_SHOW_FUNC_INT(limit_adjust, limit_adjust)
544 BUILD_STORE_FUNC_DEG(limit_adjust, thermostat)
545
546 static DEVICE_ATTR(sensor1_temperature, S_IRUGO,
547 show_sensor1_temperature,NULL);
548 static DEVICE_ATTR(sensor2_temperature, S_IRUGO,
549 show_sensor2_temperature,NULL);
550 static DEVICE_ATTR(sensor1_limit, S_IRUGO,
551 show_sensor1_limit, NULL);
552 static DEVICE_ATTR(sensor2_limit, S_IRUGO,
553 show_sensor2_limit, NULL);
554 static DEVICE_ATTR(sensor1_location, S_IRUGO,
555 show_sensor1_location, NULL);
556 static DEVICE_ATTR(sensor2_location, S_IRUGO,
557 show_sensor2_location, NULL);
558
559 static DEVICE_ATTR(specified_fan_speed, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
560 show_specified_fan_speed,store_specified_fan_speed);
561
562 static DEVICE_ATTR(sensor1_fan_speed, S_IRUGO,
563 show_sensor1_fan_speed, NULL);
564 static DEVICE_ATTR(sensor2_fan_speed, S_IRUGO,
565 show_sensor2_fan_speed, NULL);
566
567 static DEVICE_ATTR(limit_adjust, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
568 show_limit_adjust, store_limit_adjust);
569
570
571 static int __init
572 thermostat_init(void)
573 {
574 struct device_node* np;
575 const u32 *prop;
576 int i = 0, offset = 0;
577
578 np = of_find_node_by_name(NULL, "fan");
579 if (!np)
580 return -ENODEV;
581 if (of_device_is_compatible(np, "adt7460"))
582 therm_type = ADT7460;
583 else if (of_device_is_compatible(np, "adt7467"))
584 therm_type = ADT7467;
585 else {
586 of_node_put(np);
587 return -ENODEV;
588 }
589
590 prop = of_get_property(np, "hwsensor-params-version", NULL);
591 printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop,
592 (*prop == 1)?"":"un");
593 if (*prop != 1) {
594 of_node_put(np);
595 return -ENODEV;
596 }
597
598 prop = of_get_property(np, "reg", NULL);
599 if (!prop) {
600 of_node_put(np);
601 return -ENODEV;
602 }
603
604 /* look for bus either by path or using "reg" */
605 if (strstr(np->full_name, "/i2c-bus@") != NULL) {
606 const char *tmp_bus = (strstr(np->full_name, "/i2c-bus@") + 9);
607 therm_bus = tmp_bus[0]-'0';
608 } else {
609 therm_bus = ((*prop) >> 8) & 0x0f;
610 }
611
612 therm_address = ((*prop) & 0xff) >> 1;
613
614 printk(KERN_INFO "adt746x: Thermostat bus: %d, address: 0x%02x, "
615 "limit_adjust: %d, fan_speed: %d\n",
616 therm_bus, therm_address, limit_adjust, fan_speed);
617
618 if (of_get_property(np, "hwsensor-location", NULL)) {
619 for (i = 0; i < 3; i++) {
620 sensor_location[i] = of_get_property(np,
621 "hwsensor-location", NULL) + offset;
622
623 if (sensor_location[i] == NULL)
624 sensor_location[i] = "";
625
626 printk(KERN_INFO "sensor %d: %s\n", i, sensor_location[i]);
627 offset += strlen(sensor_location[i]) + 1;
628 }
629 } else {
630 sensor_location[0] = "?";
631 sensor_location[1] = "?";
632 sensor_location[2] = "?";
633 }
634
635 of_dev = of_platform_device_create(np, "temperatures", NULL);
636 of_node_put(np);
637
638 if (of_dev == NULL) {
639 printk(KERN_ERR "Can't register temperatures device !\n");
640 return -ENODEV;
641 }
642
643 #ifndef CONFIG_I2C_POWERMAC
644 request_module("i2c-powermac");
645 #endif
646
647 return i2c_add_driver(&thermostat_driver);
648 }
649
650 static void thermostat_create_files(void)
651 {
652 int err;
653
654 err = device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature);
655 err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature);
656 err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_limit);
657 err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_limit);
658 err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_location);
659 err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_location);
660 err |= device_create_file(&of_dev->dev, &dev_attr_limit_adjust);
661 err |= device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed);
662 err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
663 if(therm_type == ADT7460)
664 err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
665 if (err)
666 printk(KERN_WARNING
667 "Failed to create tempertaure attribute file(s).\n");
668 }
669
670 static void thermostat_remove_files(void)
671 {
672 if (of_dev) {
673 device_remove_file(&of_dev->dev, &dev_attr_sensor1_temperature);
674 device_remove_file(&of_dev->dev, &dev_attr_sensor2_temperature);
675 device_remove_file(&of_dev->dev, &dev_attr_sensor1_limit);
676 device_remove_file(&of_dev->dev, &dev_attr_sensor2_limit);
677 device_remove_file(&of_dev->dev, &dev_attr_sensor1_location);
678 device_remove_file(&of_dev->dev, &dev_attr_sensor2_location);
679 device_remove_file(&of_dev->dev, &dev_attr_limit_adjust);
680 device_remove_file(&of_dev->dev, &dev_attr_specified_fan_speed);
681 device_remove_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
682
683 if(therm_type == ADT7460)
684 device_remove_file(&of_dev->dev,
685 &dev_attr_sensor2_fan_speed);
686
687 }
688 }
689
690 static void __exit
691 thermostat_exit(void)
692 {
693 i2c_del_driver(&thermostat_driver);
694 of_device_unregister(of_dev);
695 }
696
697 module_init(thermostat_init);
698 module_exit(thermostat_exit);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree