drivers/media/radio/radio-gemtek.c

   1 /* GemTek radio card driver for Linux (C) 1998 Jonas Munsin <jmunsin@iki.fi>
   2  *
   3  * GemTek hasn't released any specs on the card, so the protocol had to
   4  * be reverse engineered with dosemu.
   5  *
   6  * Besides the protocol changes, this is mostly a copy of:
   7  *
   8  *    RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff
   9  *
  10  *    Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood
  11  *    Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk>
  12  *    Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
  13  *
  14  * TODO: Allow for more than one of these foolish entities :-)
  15  *
  16  * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
  17  */
  18
  19 #include <linux/module.h>       /* Modules                      */
  20 #include <linux/init.h>         /* Initdata                     */
  21 #include <linux/ioport.h>       /* request_region               */
  22 #include <linux/delay.h>        /* udelay                       */
  23 #include <linux/videodev2.h>    /* kernel radio structs         */
  24 #include <linux/mutex.h>
  25 #include <linux/io.h>           /* outb, outb_p                 */
  26 #include <media/v4l2-ioctl.h>
  27 #include <media/v4l2-device.h>
  28
  29 /*
  30  * Module info.
  31  */
  32
  33 MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>");
  34 MODULE_DESCRIPTION("A driver for the GemTek Radio card.");
  35 MODULE_LICENSE("GPL");
  36 MODULE_VERSION("0.0.4");
  37
  38 /*
  39  * Module params.
  40  */
  41
  42 #ifndef CONFIG_RADIO_GEMTEK_PORT
  43 #define CONFIG_RADIO_GEMTEK_PORT -1
  44 #endif
  45 #ifndef CONFIG_RADIO_GEMTEK_PROBE
  46 #define CONFIG_RADIO_GEMTEK_PROBE 1
  47 #endif
  48
  49 static int io           = CONFIG_RADIO_GEMTEK_PORT;
  50 static int probe        = CONFIG_RADIO_GEMTEK_PROBE;
  51 static int hardmute;
  52 static int shutdown     = 1;
  53 static int keepmuted    = 1;
  54 static int initmute     = 1;
  55 static int radio_nr     = -1;
  56
  57 module_param(io, int, 0444);
  58 MODULE_PARM_DESC(io, "Force I/O port for the GemTek Radio card if automatic "
  59          "probing is disabled or fails. The most common I/O ports are: 0x20c "
  60          "0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to "
  61          "work for the combined sound/radiocard).");
  62
  63 module_param(probe, bool, 0444);
  64 MODULE_PARM_DESC(probe, "Enable automatic device probing. Note: only the most "
  65         "common I/O ports used by the card are probed.");
  66
  67 module_param(hardmute, bool, 0644);
  68 MODULE_PARM_DESC(hardmute, "Enable `hard muting' by shutting down PLL, may "
  69          "reduce static noise.");
  70
  71 module_param(shutdown, bool, 0644);
  72 MODULE_PARM_DESC(shutdown, "Enable shutting down PLL and muting line when "
  73          "module is unloaded.");
  74
  75 module_param(keepmuted, bool, 0644);
  76 MODULE_PARM_DESC(keepmuted, "Keep card muted even when frequency is changed.");
  77
  78 module_param(initmute, bool, 0444);
  79 MODULE_PARM_DESC(initmute, "Mute card when module is loaded.");
  80
  81 module_param(radio_nr, int, 0444);
  82
  83 /*
  84  * Functions for controlling the card.
  85  */
  86 #define GEMTEK_LOWFREQ  (87*16000)
  87 #define GEMTEK_HIGHFREQ (108*16000)
  88
  89 /*
  90  * Frequency calculation constants.  Intermediate frequency 10.52 MHz (nominal
  91  * value 10.7 MHz), reference divisor 6.39 kHz (nominal 6.25 kHz).
  92  */
  93 #define FSCALE          8
  94 #define IF_OFFSET       ((unsigned int)(10.52 * 16000 * (1<<FSCALE)))
  95 #define REF_FREQ        ((unsigned int)(6.39 * 16 * (1<<FSCALE)))
  96
  97 #define GEMTEK_CK               0x01    /* Clock signal                 */
  98 #define GEMTEK_DA               0x02    /* Serial data                  */
  99 #define GEMTEK_CE               0x04    /* Chip enable                  */
 100 #define GEMTEK_NS               0x08    /* No signal                    */
 101 #define GEMTEK_MT               0x10    /* Line mute                    */
 102 #define GEMTEK_STDF_3_125_KHZ   0x01    /* Standard frequency 3.125 kHz */
 103 #define GEMTEK_PLL_OFF          0x07    /* PLL off                      */
 104
 105 #define BU2614_BUS_SIZE 32      /* BU2614 / BU2614FS bus size           */
 106
 107 #define SHORT_DELAY 5           /* usec */
 108 #define LONG_DELAY 75           /* usec */
 109
 110 struct gemtek {
 111         struct v4l2_device v4l2_dev;
 112         struct video_device vdev;
 113         struct mutex lock;
 114         unsigned long lastfreq;
 115         int muted;
 116         int verified;
 117         int io;
 118         u32 bu2614data;
 119 };
 120
 121 static struct gemtek gemtek_card;
 122
 123 #define BU2614_FREQ_BITS        16 /* D0..D15, Frequency data           */
 124 #define BU2614_PORT_BITS        3 /* P0..P2, Output port control data   */
 125 #define BU2614_VOID_BITS        4 /* unused                             */
 126 #define BU2614_FMES_BITS        1 /* CT, Frequency measurement beginning data */
 127 #define BU2614_STDF_BITS        3 /* R0..R2, Standard frequency data    */
 128 #define BU2614_SWIN_BITS        1 /* S, Switch between FMIN / AMIN      */
 129 #define BU2614_SWAL_BITS        1 /* PS, Swallow counter division (AMIN only)*/
 130 #define BU2614_VOID2_BITS       1 /* unused                             */
 131 #define BU2614_FMUN_BITS        1 /* GT, Frequency measurement time & unlock */
 132 #define BU2614_TEST_BITS        1 /* TS, Test data is input             */
 133
 134 #define BU2614_FREQ_SHIFT       0
 135 #define BU2614_PORT_SHIFT       (BU2614_FREQ_BITS + BU2614_FREQ_SHIFT)
 136 #define BU2614_VOID_SHIFT       (BU2614_PORT_BITS + BU2614_PORT_SHIFT)
 137 #define BU2614_FMES_SHIFT       (BU2614_VOID_BITS + BU2614_VOID_SHIFT)
 138 #define BU2614_STDF_SHIFT       (BU2614_FMES_BITS + BU2614_FMES_SHIFT)
 139 #define BU2614_SWIN_SHIFT       (BU2614_STDF_BITS + BU2614_STDF_SHIFT)
 140 #define BU2614_SWAL_SHIFT       (BU2614_SWIN_BITS + BU2614_SWIN_SHIFT)
 141 #define BU2614_VOID2_SHIFT      (BU2614_SWAL_BITS + BU2614_SWAL_SHIFT)
 142 #define BU2614_FMUN_SHIFT       (BU2614_VOID2_BITS + BU2614_VOID2_SHIFT)
 143 #define BU2614_TEST_SHIFT       (BU2614_FMUN_BITS + BU2614_FMUN_SHIFT)
 144
 145 #define MKMASK(field)   (((1<<BU2614_##field##_BITS) - 1) << \
 146                         BU2614_##field##_SHIFT)
 147 #define BU2614_PORT_MASK        MKMASK(PORT)
 148 #define BU2614_FREQ_MASK        MKMASK(FREQ)
 149 #define BU2614_VOID_MASK        MKMASK(VOID)
 150 #define BU2614_FMES_MASK        MKMASK(FMES)
 151 #define BU2614_STDF_MASK        MKMASK(STDF)
 152 #define BU2614_SWIN_MASK        MKMASK(SWIN)
 153 #define BU2614_SWAL_MASK        MKMASK(SWAL)
 154 #define BU2614_VOID2_MASK       MKMASK(VOID2)
 155 #define BU2614_FMUN_MASK        MKMASK(FMUN)
 156 #define BU2614_TEST_MASK        MKMASK(TEST)
 157
 158 /*
 159  * Set data which will be sent to BU2614FS.
 160  */
 161 #define gemtek_bu2614_set(dev, field, data) ((dev)->bu2614data = \
 162         ((dev)->bu2614data & ~field##_MASK) | ((data) << field##_SHIFT))
 163
 164 /*
 165  * Transmit settings to BU2614FS over GemTek IC.
 166  */
 167 static void gemtek_bu2614_transmit(struct gemtek *gt)
 168 {
 169         int i, bit, q, mute;
 170
 171         mutex_lock(&gt->lock);
 172
 173         mute = gt->muted ? GEMTEK_MT : 0x00;
 174
 175         outb_p(mute | GEMTEK_DA | GEMTEK_CK, gt->io);
 176         udelay(SHORT_DELAY);
 177         outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, gt->io);
 178         udelay(LONG_DELAY);
 179
 180         for (i = 0, q = gt->bu2614data; i < 32; i++, q >>= 1) {
 181                 bit = (q & 1) ? GEMTEK_DA : 0;
 182                 outb_p(mute | GEMTEK_CE | bit, gt->io);
 183                 udelay(SHORT_DELAY);
 184                 outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, gt->io);
 185                 udelay(SHORT_DELAY);
 186         }
 187
 188         outb_p(mute | GEMTEK_DA | GEMTEK_CK, gt->io);
 189         udelay(SHORT_DELAY);
 190         outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, gt->io);
 191         udelay(LONG_DELAY);
 192
 193         mutex_unlock(&gt->lock);
 194 }
 195
 196 /*
 197  * Calculate divisor from FM-frequency for BU2614FS (3.125 KHz STDF expected).
 198  */
 199 static unsigned long gemtek_convfreq(unsigned long freq)
 200 {
 201         return ((freq<<FSCALE) + IF_OFFSET + REF_FREQ/2) / REF_FREQ;
 202 }
 203
 204 /*
 205  * Set FM-frequency.
 206  */
 207 static void gemtek_setfreq(struct gemtek *gt, unsigned long freq)
 208 {
 209         if (keepmuted && hardmute && gt->muted)
 210                 return;
 211
 212         freq = clamp_val(freq, GEMTEK_LOWFREQ, GEMTEK_HIGHFREQ);
 213
 214         gt->lastfreq = freq;
 215         gt->muted = 0;
 216
 217         gemtek_bu2614_set(gt, BU2614_PORT, 0);
 218         gemtek_bu2614_set(gt, BU2614_FMES, 0);
 219         gemtek_bu2614_set(gt, BU2614_SWIN, 0);  /* FM-mode      */
 220         gemtek_bu2614_set(gt, BU2614_SWAL, 0);
 221         gemtek_bu2614_set(gt, BU2614_FMUN, 1);  /* GT bit set   */
 222         gemtek_bu2614_set(gt, BU2614_TEST, 0);
 223
 224         gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_STDF_3_125_KHZ);
 225         gemtek_bu2614_set(gt, BU2614_FREQ, gemtek_convfreq(freq));
 226
 227         gemtek_bu2614_transmit(gt);
 228 }
 229
 230 /*
 231  * Set mute flag.
 232  */
 233 static void gemtek_mute(struct gemtek *gt)
 234 {
 235         int i;
 236
 237         gt->muted = 1;
 238
 239         if (hardmute) {
 240                 /* Turn off PLL, disable data output */
 241                 gemtek_bu2614_set(gt, BU2614_PORT, 0);
 242                 gemtek_bu2614_set(gt, BU2614_FMES, 0);  /* CT bit off   */
 243                 gemtek_bu2614_set(gt, BU2614_SWIN, 0);  /* FM-mode      */
 244                 gemtek_bu2614_set(gt, BU2614_SWAL, 0);
 245                 gemtek_bu2614_set(gt, BU2614_FMUN, 0);  /* GT bit off   */
 246                 gemtek_bu2614_set(gt, BU2614_TEST, 0);
 247                 gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_PLL_OFF);
 248                 gemtek_bu2614_set(gt, BU2614_FREQ, 0);
 249                 gemtek_bu2614_transmit(gt);
 250                 return;
 251         }
 252
 253         mutex_lock(&gt->lock);
 254
 255         /* Read bus contents (CE, CK and DA). */
 256         i = inb_p(gt->io);
 257         /* Write it back with mute flag set. */
 258         outb_p((i >> 5) | GEMTEK_MT, gt->io);
 259         udelay(SHORT_DELAY);
 260
 261         mutex_unlock(&gt->lock);
 262 }
 263
 264 /*
 265  * Unset mute flag.
 266  */
 267 static void gemtek_unmute(struct gemtek *gt)
 268 {
 269         int i;
 270
 271         gt->muted = 0;
 272         if (hardmute) {
 273                 /* Turn PLL back on. */
 274                 gemtek_setfreq(gt, gt->lastfreq);
 275                 return;
 276         }
 277         mutex_lock(&gt->lock);
 278
 279         i = inb_p(gt->io);
 280         outb_p(i >> 5, gt->io);
 281         udelay(SHORT_DELAY);
 282
 283         mutex_unlock(&gt->lock);
 284 }
 285
 286 /*
 287  * Get signal strength (= stereo status).
 288  */
 289 static inline int gemtek_getsigstr(struct gemtek *gt)
 290 {
 291         int sig;
 292
 293         mutex_lock(&gt->lock);
 294         sig = inb_p(gt->io) & GEMTEK_NS ? 0 : 1;
 295         mutex_unlock(&gt->lock);
 296         return sig;
 297 }
 298
 299 /*
 300  * Check if requested card acts like GemTek Radio card.
 301  */
 302 static int gemtek_verify(struct gemtek *gt, int port)
 303 {
 304         int i, q;
 305
 306         if (gt->verified == port)
 307                 return 1;
 308
 309         mutex_lock(&gt->lock);
 310
 311         q = inb_p(port);        /* Read bus contents before probing. */
 312         /* Try to turn on CE, CK and DA respectively and check if card responds
 313            properly. */
 314         for (i = 0; i < 3; ++i) {
 315                 outb_p(1 << i, port);
 316                 udelay(SHORT_DELAY);
 317
 318                 if ((inb_p(port) & (~GEMTEK_NS)) != (0x17 | (1 << (i + 5)))) {
 319                         mutex_unlock(&gt->lock);
 320                         return 0;
 321                 }
 322         }
 323         outb_p(q >> 5, port);   /* Write bus contents back. */
 324         udelay(SHORT_DELAY);
 325
 326         mutex_unlock(&gt->lock);
 327         gt->verified = port;
 328
 329         return 1;
 330 }
 331
 332 /*
 333  * Automatic probing for card.
 334  */
 335 static int gemtek_probe(struct gemtek *gt)
 336 {
 337         struct v4l2_device *v4l2_dev = &gt->v4l2_dev;
 338         int ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c };
 339         int i;
 340
 341         if (!probe) {
 342                 v4l2_info(v4l2_dev, "Automatic device probing disabled.\n");
 343                 return -1;
 344         }
 345
 346         v4l2_info(v4l2_dev, "Automatic device probing enabled.\n");
 347
 348         for (i = 0; i < ARRAY_SIZE(ioports); ++i) {
 349                 v4l2_info(v4l2_dev, "Trying I/O port 0x%x...\n", ioports[i]);
 350
 351                 if (!request_region(ioports[i], 1, "gemtek-probe")) {
 352                         v4l2_warn(v4l2_dev, "I/O port 0x%x busy!\n",
 353                                ioports[i]);
 354                         continue;
 355                 }
 356
 357                 if (gemtek_verify(gt, ioports[i])) {
 358                         v4l2_info(v4l2_dev, "Card found from I/O port "
 359                                "0x%x!\n", ioports[i]);
 360
 361                         release_region(ioports[i], 1);
 362                         gt->io = ioports[i];
 363                         return gt->io;
 364                 }
 365
 366                 release_region(ioports[i], 1);
 367         }
 368
 369         v4l2_err(v4l2_dev, "Automatic probing failed!\n");
 370         return -1;
 371 }
 372
 373 /*
 374  * Video 4 Linux stuff.
 375  */
 376
 377 static const struct v4l2_file_operations gemtek_fops = {
 378         .owner          = THIS_MODULE,
 379         .unlocked_ioctl = video_ioctl2,
 380 };
 381
 382 static int vidioc_querycap(struct file *file, void *priv,
 383                            struct v4l2_capability *v)
 384 {
 385         strlcpy(v->driver, "radio-gemtek", sizeof(v->driver));
 386         strlcpy(v->card, "GemTek", sizeof(v->card));
 387         strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
 388         v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 389         return 0;
 390 }
 391
 392 static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v)
 393 {
 394         struct gemtek *gt = video_drvdata(file);
 395
 396         if (v->index > 0)
 397                 return -EINVAL;
 398
 399         strlcpy(v->name, "FM", sizeof(v->name));
 400         v->type = V4L2_TUNER_RADIO;
 401         v->rangelow = GEMTEK_LOWFREQ;
 402         v->rangehigh = GEMTEK_HIGHFREQ;
 403         v->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
 404         v->signal = 0xffff * gemtek_getsigstr(gt);
 405         if (v->signal) {
 406                 v->audmode = V4L2_TUNER_MODE_STEREO;
 407                 v->rxsubchans = V4L2_TUNER_SUB_STEREO;
 408         } else {
 409                 v->audmode = V4L2_TUNER_MODE_MONO;
 410                 v->rxsubchans = V4L2_TUNER_SUB_MONO;
 411         }
 412         return 0;
 413 }
 414
 415 static int vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *v)
 416 {
 417         return (v->index != 0) ? -EINVAL : 0;
 418 }
 419
 420 static int vidioc_g_frequency(struct file *file, void *priv,
 421                               struct v4l2_frequency *f)
 422 {
 423         struct gemtek *gt = video_drvdata(file);
 424
 425         if (f->tuner != 0)
 426                 return -EINVAL;
 427         f->type = V4L2_TUNER_RADIO;
 428         f->frequency = gt->lastfreq;
 429         return 0;
 430 }
 431
 432 static int vidioc_s_frequency(struct file *file, void *priv,
 433                               struct v4l2_frequency *f)
 434 {
 435         struct gemtek *gt = video_drvdata(file);
 436
 437         if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
 438                 return -EINVAL;
 439         gemtek_setfreq(gt, f->frequency);
 440         return 0;
 441 }
 442
 443 static int vidioc_queryctrl(struct file *file, void *priv,
 444                             struct v4l2_queryctrl *qc)
 445 {
 446         switch (qc->id) {
 447         case V4L2_CID_AUDIO_MUTE:
 448                 return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
 449         default:
 450                 return -EINVAL;
 451         }
 452 }
 453
 454 static int vidioc_g_ctrl(struct file *file, void *priv,
 455                          struct v4l2_control *ctrl)
 456 {
 457         struct gemtek *gt = video_drvdata(file);
 458
 459         switch (ctrl->id) {
 460         case V4L2_CID_AUDIO_MUTE:
 461                 ctrl->value = gt->muted;
 462                 return 0;
 463         }
 464         return -EINVAL;
 465 }
 466
 467 static int vidioc_s_ctrl(struct file *file, void *priv,
 468                          struct v4l2_control *ctrl)
 469 {
 470         struct gemtek *gt = video_drvdata(file);
 471
 472         switch (ctrl->id) {
 473         case V4L2_CID_AUDIO_MUTE:
 474                 if (ctrl->value)
 475                         gemtek_mute(gt);
 476                 else
 477                         gemtek_unmute(gt);
 478                 return 0;
 479         }
 480         return -EINVAL;
 481 }
 482
 483 static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
 484 {
 485         *i = 0;
 486         return 0;
 487 }
 488
 489 static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
 490 {
 491         return (i != 0) ? -EINVAL : 0;
 492 }
 493
 494 static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
 495 {
 496         a->index = 0;
 497         strlcpy(a->name, "Radio", sizeof(a->name));
 498         a->capability = V4L2_AUDCAP_STEREO;
 499         return 0;
 500 }
 501
 502 static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a)
 503 {
 504         return (a->index != 0) ? -EINVAL : 0;
 505 }
 506
 507 static const struct v4l2_ioctl_ops gemtek_ioctl_ops = {
 508         .vidioc_querycap        = vidioc_querycap,
 509         .vidioc_g_tuner         = vidioc_g_tuner,
 510         .vidioc_s_tuner         = vidioc_s_tuner,
 511         .vidioc_g_audio         = vidioc_g_audio,
 512         .vidioc_s_audio         = vidioc_s_audio,
 513         .vidioc_g_input         = vidioc_g_input,
 514         .vidioc_s_input         = vidioc_s_input,
 515         .vidioc_g_frequency     = vidioc_g_frequency,
 516         .vidioc_s_frequency     = vidioc_s_frequency,
 517         .vidioc_queryctrl       = vidioc_queryctrl,
 518         .vidioc_g_ctrl          = vidioc_g_ctrl,
 519         .vidioc_s_ctrl          = vidioc_s_ctrl
 520 };
 521
 522 /*
 523  * Initialization / cleanup related stuff.
 524  */
 525
 526 static int __init gemtek_init(void)
 527 {
 528         struct gemtek *gt = &gemtek_card;
 529         struct v4l2_device *v4l2_dev = &gt->v4l2_dev;
 530         int res;
 531
 532         strlcpy(v4l2_dev->name, "gemtek", sizeof(v4l2_dev->name));
 533
 534         v4l2_info(v4l2_dev, "GemTek Radio card driver: v0.0.3\n");
 535
 536         mutex_init(&gt->lock);
 537
 538         gt->verified = -1;
 539         gt->io = io;
 540         gemtek_probe(gt);
 541         if (gt->io) {
 542                 if (!request_region(gt->io, 1, "gemtek")) {
 543                         v4l2_err(v4l2_dev, "I/O port 0x%x already in use.\n", gt->io);
 544                         return -EBUSY;
 545                 }
 546
 547                 if (!gemtek_verify(gt, gt->io))
 548                         v4l2_warn(v4l2_dev, "Card at I/O port 0x%x does not "
 549                                "respond properly, check your "
 550                                "configuration.\n", gt->io);
 551                 else
 552                         v4l2_info(v4l2_dev, "Using I/O port 0x%x.\n", gt->io);
 553         } else if (probe) {
 554                 v4l2_err(v4l2_dev, "Automatic probing failed and no "
 555                        "fixed I/O port defined.\n");
 556                 return -ENODEV;
 557         } else {
 558                 v4l2_err(v4l2_dev, "Automatic probing disabled but no fixed "
 559                        "I/O port defined.");
 560                 return -EINVAL;
 561         }
 562
 563         res = v4l2_device_register(NULL, v4l2_dev);
 564         if (res < 0) {
 565                 v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
 566                 release_region(gt->io, 1);
 567                 return res;
 568         }
 569
 570         strlcpy(gt->vdev.name, v4l2_dev->name, sizeof(gt->vdev.name));
 571         gt->vdev.v4l2_dev = v4l2_dev;
 572         gt->vdev.fops = &gemtek_fops;
 573         gt->vdev.ioctl_ops = &gemtek_ioctl_ops;
 574         gt->vdev.release = video_device_release_empty;
 575         video_set_drvdata(&gt->vdev, gt);
 576
 577         /* Set defaults */
 578         gt->lastfreq = GEMTEK_LOWFREQ;
 579         gt->bu2614data = 0;
 580
 581         if (initmute)
 582                 gemtek_mute(gt);
 583
 584         if (video_register_device(&gt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
 585                 v4l2_device_unregister(v4l2_dev);
 586                 release_region(gt->io, 1);
 587                 return -EBUSY;
 588         }
 589
 590         return 0;
 591 }
 592
 593 /*
 594  * Module cleanup
 595  */
 596 static void __exit gemtek_exit(void)
 597 {
 598         struct gemtek *gt = &gemtek_card;
 599         struct v4l2_device *v4l2_dev = &gt->v4l2_dev;
 600
 601         if (shutdown) {
 602                 hardmute = 1;   /* Turn off PLL */
 603                 gemtek_mute(gt);
 604         } else {
 605                 v4l2_info(v4l2_dev, "Module unloaded but card not muted!\n");
 606         }
 607
 608         video_unregister_device(&gt->vdev);
 609         v4l2_device_unregister(&gt->v4l2_dev);
 610         release_region(gt->io, 1);
 611 }
 612
 613 module_init(gemtek_init);
 614 module_exit(gemtek_exit);