2 mainmenu "Linux Kernel Configuration for x86"
6 bool "64-bit kernel" if ARCH = "x86"
7 default ARCH = "x86_64"
9 Say yes to build a 64-bit kernel - formerly known as x86_64
10 Say no to build a 32-bit kernel - formerly known as i386
21 select HAVE_AOUT if X86_32
24 select HAVE_UNSTABLE_SCHED_CLOCK
27 select HAVE_PERF_EVENTS if (!M386 && !M486)
28 select HAVE_IOREMAP_PROT
30 select ARCH_WANT_OPTIONAL_GPIOLIB
31 select ARCH_WANT_FRAME_POINTERS
33 select HAVE_KRETPROBES
34 select HAVE_FTRACE_MCOUNT_RECORD
35 select HAVE_DYNAMIC_FTRACE
36 select HAVE_FUNCTION_TRACER
37 select HAVE_FUNCTION_GRAPH_TRACER
38 select HAVE_FUNCTION_GRAPH_FP_TEST
39 select HAVE_FUNCTION_TRACE_MCOUNT_TEST
40 select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
41 select HAVE_SYSCALL_TRACEPOINTS
44 select HAVE_ARCH_TRACEHOOK
45 select HAVE_GENERIC_DMA_COHERENT if X86_32
46 select HAVE_EFFICIENT_UNALIGNED_ACCESS
47 select USER_STACKTRACE_SUPPORT
48 select HAVE_DMA_API_DEBUG
49 select HAVE_KERNEL_GZIP
50 select HAVE_KERNEL_BZIP2
51 select HAVE_KERNEL_LZMA
52 select HAVE_HW_BREAKPOINT
53 select HAVE_ARCH_KMEMCHECK
54 select HAVE_USER_RETURN_NOTIFIER
58 default "elf32-i386" if X86_32
59 default "elf64-x86-64" if X86_64
63 default "arch/x86/configs/i386_defconfig" if X86_32
64 default "arch/x86/configs/x86_64_defconfig" if X86_64
69 config GENERIC_CMOS_UPDATE
72 config CLOCKSOURCE_WATCHDOG
75 config GENERIC_CLOCKEVENTS
78 config GENERIC_CLOCKEVENTS_BROADCAST
80 depends on X86_64 || (X86_32 && X86_LOCAL_APIC)
82 config LOCKDEP_SUPPORT
85 config STACKTRACE_SUPPORT
88 config HAVE_LATENCYTOP_SUPPORT
100 config GENERIC_ISA_DMA
109 select GENERIC_BUG_RELATIVE_POINTERS if X86_64
111 config GENERIC_BUG_RELATIVE_POINTERS
114 config GENERIC_HWEIGHT
120 config ARCH_MAY_HAVE_PC_FDC
123 config RWSEM_GENERIC_SPINLOCK
126 config RWSEM_XCHGADD_ALGORITHM
129 config ARCH_HAS_CPU_IDLE_WAIT
132 config GENERIC_CALIBRATE_DELAY
135 config GENERIC_TIME_VSYSCALL
139 config ARCH_HAS_CPU_RELAX
142 config ARCH_HAS_DEFAULT_IDLE
145 config ARCH_HAS_CACHE_LINE_SIZE
148 config HAVE_SETUP_PER_CPU_AREA
151 config NEED_PER_CPU_EMBED_FIRST_CHUNK
154 config NEED_PER_CPU_PAGE_FIRST_CHUNK
157 config HAVE_CPUMASK_OF_CPU_MAP
160 config ARCH_HIBERNATION_POSSIBLE
163 config ARCH_SUSPEND_POSSIBLE
170 config ARCH_POPULATES_NODE_MAP
177 config ARCH_SUPPORTS_OPTIMIZED_INLINING
180 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
183 config HAVE_INTEL_TXT
185 depends on EXPERIMENTAL && DMAR && ACPI
187 # Use the generic interrupt handling code in kernel/irq/:
188 config GENERIC_HARDIRQS
192 config GENERIC_HARDIRQS_NO__DO_IRQ
195 config GENERIC_IRQ_PROBE
199 config GENERIC_PENDING_IRQ
201 depends on GENERIC_HARDIRQS && SMP
204 config USE_GENERIC_SMP_HELPERS
210 depends on X86_32 && SMP
214 depends on X86_64 && SMP
221 config X86_TRAMPOLINE
223 depends on SMP || (64BIT && ACPI_SLEEP)
226 config X86_32_LAZY_GS
228 depends on X86_32 && !CC_STACKPROTECTOR
232 source "init/Kconfig"
233 source "kernel/Kconfig.freezer"
235 menu "Processor type and features"
237 source "kernel/time/Kconfig"
240 bool "Symmetric multi-processing support"
242 This enables support for systems with more than one CPU. If you have
243 a system with only one CPU, like most personal computers, say N. If
244 you have a system with more than one CPU, say Y.
246 If you say N here, the kernel will run on single and multiprocessor
247 machines, but will use only one CPU of a multiprocessor machine. If
248 you say Y here, the kernel will run on many, but not all,
249 singleprocessor machines. On a singleprocessor machine, the kernel
250 will run faster if you say N here.
252 Note that if you say Y here and choose architecture "586" or
253 "Pentium" under "Processor family", the kernel will not work on 486
254 architectures. Similarly, multiprocessor kernels for the "PPro"
255 architecture may not work on all Pentium based boards.
257 People using multiprocessor machines who say Y here should also say
258 Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
259 Management" code will be disabled if you say Y here.
261 See also <file:Documentation/i386/IO-APIC.txt>,
262 <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
263 <http://www.tldp.org/docs.html#howto>.
265 If you don't know what to do here, say N.
268 bool "Support x2apic"
269 depends on X86_LOCAL_APIC && X86_64 && INTR_REMAP
271 This enables x2apic support on CPUs that have this feature.
273 This allows 32-bit apic IDs (so it can support very large systems),
274 and accesses the local apic via MSRs not via mmio.
276 If you don't know what to do here, say N.
279 bool "Support sparse irq numbering"
280 depends on PCI_MSI || HT_IRQ
282 This enables support for sparse irqs. This is useful for distro
283 kernels that want to define a high CONFIG_NR_CPUS value but still
284 want to have low kernel memory footprint on smaller machines.
286 ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread
287 out the irq_desc[] array in a more NUMA-friendly way. )
289 If you don't know what to do here, say N.
293 depends on SPARSE_IRQ && NUMA
296 bool "Enable MPS table" if ACPI
298 depends on X86_LOCAL_APIC
300 For old smp systems that do not have proper acpi support. Newer systems
301 (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
304 bool "Support for big SMP systems with more than 8 CPUs"
305 depends on X86_32 && SMP
307 This option is needed for the systems that have more than 8 CPUs
310 config X86_EXTENDED_PLATFORM
311 bool "Support for extended (non-PC) x86 platforms"
314 If you disable this option then the kernel will only support
315 standard PC platforms. (which covers the vast majority of
318 If you enable this option then you'll be able to select support
319 for the following (non-PC) 32 bit x86 platforms:
323 SGI 320/540 (Visual Workstation)
324 Summit/EXA (IBM x440)
325 Unisys ES7000 IA32 series
326 Moorestown MID devices
328 If you have one of these systems, or if you want to build a
329 generic distribution kernel, say Y here - otherwise say N.
333 config X86_EXTENDED_PLATFORM
334 bool "Support for extended (non-PC) x86 platforms"
337 If you disable this option then the kernel will only support
338 standard PC platforms. (which covers the vast majority of
341 If you enable this option then you'll be able to select support
342 for the following (non-PC) 64 bit x86 platforms:
346 If you have one of these systems, or if you want to build a
347 generic distribution kernel, say Y here - otherwise say N.
349 # This is an alphabetically sorted list of 64 bit extended platforms
350 # Please maintain the alphabetic order if and when there are additions
355 depends on X86_64 && PCI
356 depends on X86_EXTENDED_PLATFORM
358 Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is
359 supposed to run on these EM64T-based machines. Only choose this option
360 if you have one of these machines.
363 bool "SGI Ultraviolet"
365 depends on X86_EXTENDED_PLATFORM
367 depends on X86_X2APIC
369 This option is needed in order to support SGI Ultraviolet systems.
370 If you don't have one of these, you should say N here.
372 # Following is an alphabetically sorted list of 32 bit extended platforms
373 # Please maintain the alphabetic order if and when there are additions
378 depends on X86_EXTENDED_PLATFORM
380 Select this for an AMD Elan processor.
382 Do not use this option for K6/Athlon/Opteron processors!
384 If unsure, choose "PC-compatible" instead.
387 bool "Moorestown MID platform"
389 depends on X86_EXTENDED_PLATFORM
391 Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
392 Internet Device(MID) platform. Moorestown consists of two chips:
393 Lincroft (CPU core, graphics, and memory controller) and Langwell IOH.
394 Unlike standard x86 PCs, Moorestown does not have many legacy devices
395 nor standard legacy replacement devices/features. e.g. Moorestown does
396 not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
399 bool "RDC R-321x SoC"
401 depends on X86_EXTENDED_PLATFORM
403 select X86_REBOOTFIXUPS
405 This option is needed for RDC R-321x system-on-chip, also known
407 If you don't have one of these chips, you should say N here.
409 config X86_32_NON_STANDARD
410 bool "Support non-standard 32-bit SMP architectures"
411 depends on X86_32 && SMP
412 depends on X86_EXTENDED_PLATFORM
414 This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
415 subarchitectures. It is intended for a generic binary kernel.
416 if you select them all, kernel will probe it one by one. and will
419 # Alphabetically sorted list of Non standard 32 bit platforms
422 bool "NUMAQ (IBM/Sequent)"
423 depends on X86_32_NON_STANDARD
427 This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
428 NUMA multiquad box. This changes the way that processors are
429 bootstrapped, and uses Clustered Logical APIC addressing mode instead
430 of Flat Logical. You will need a new lynxer.elf file to flash your
431 firmware with - send email to <Martin.Bligh@us.ibm.com>.
433 config X86_SUPPORTS_MEMORY_FAILURE
435 # MCE code calls memory_failure():
437 # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
438 depends on !X86_NUMAQ
439 # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
440 depends on X86_64 || !SPARSEMEM
441 select ARCH_SUPPORTS_MEMORY_FAILURE
445 bool "SGI 320/540 (Visual Workstation)"
446 depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
447 depends on X86_32_NON_STANDARD
449 The SGI Visual Workstation series is an IA32-based workstation
450 based on SGI systems chips with some legacy PC hardware attached.
452 Say Y here to create a kernel to run on the SGI 320 or 540.
454 A kernel compiled for the Visual Workstation will run on general
455 PCs as well. See <file:Documentation/sgi-visws.txt> for details.
458 bool "Summit/EXA (IBM x440)"
459 depends on X86_32_NON_STANDARD
461 This option is needed for IBM systems that use the Summit/EXA chipset.
462 In particular, it is needed for the x440.
465 bool "Unisys ES7000 IA32 series"
466 depends on X86_32_NON_STANDARD && X86_BIGSMP
468 Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
469 supposed to run on an IA32-based Unisys ES7000 system.
471 config SCHED_OMIT_FRAME_POINTER
473 prompt "Single-depth WCHAN output"
476 Calculate simpler /proc/<PID>/wchan values. If this option
477 is disabled then wchan values will recurse back to the
478 caller function. This provides more accurate wchan values,
479 at the expense of slightly more scheduling overhead.
481 If in doubt, say "Y".
483 menuconfig PARAVIRT_GUEST
484 bool "Paravirtualized guest support"
486 Say Y here to get to see options related to running Linux under
487 various hypervisors. This option alone does not add any kernel code.
489 If you say N, all options in this submenu will be skipped and disabled.
493 source "arch/x86/xen/Kconfig"
496 bool "VMI Guest support (DEPRECATED)"
500 VMI provides a paravirtualized interface to the VMware ESX server
501 (it could be used by other hypervisors in theory too, but is not
502 at the moment), by linking the kernel to a GPL-ed ROM module
503 provided by the hypervisor.
505 As of September 2009, VMware has started a phased retirement
506 of this feature from VMware's products. Please see
507 feature-removal-schedule.txt for details. If you are
508 planning to enable this option, please note that you cannot
509 live migrate a VMI enabled VM to a future VMware product,
510 which doesn't support VMI. So if you expect your kernel to
511 seamlessly migrate to newer VMware products, keep this
515 bool "KVM paravirtualized clock"
517 select PARAVIRT_CLOCK
519 Turning on this option will allow you to run a paravirtualized clock
520 when running over the KVM hypervisor. Instead of relying on a PIT
521 (or probably other) emulation by the underlying device model, the host
522 provides the guest with timing infrastructure such as time of day, and
526 bool "KVM Guest support"
529 This option enables various optimizations for running under the KVM
532 source "arch/x86/lguest/Kconfig"
535 bool "Enable paravirtualization code"
537 This changes the kernel so it can modify itself when it is run
538 under a hypervisor, potentially improving performance significantly
539 over full virtualization. However, when run without a hypervisor
540 the kernel is theoretically slower and slightly larger.
542 config PARAVIRT_SPINLOCKS
543 bool "Paravirtualization layer for spinlocks"
544 depends on PARAVIRT && SMP && EXPERIMENTAL
546 Paravirtualized spinlocks allow a pvops backend to replace the
547 spinlock implementation with something virtualization-friendly
548 (for example, block the virtual CPU rather than spinning).
550 Unfortunately the downside is an up to 5% performance hit on
551 native kernels, with various workloads.
553 If you are unsure how to answer this question, answer N.
555 config PARAVIRT_CLOCK
561 config PARAVIRT_DEBUG
562 bool "paravirt-ops debugging"
563 depends on PARAVIRT && DEBUG_KERNEL
565 Enable to debug paravirt_ops internals. Specifically, BUG if
566 a paravirt_op is missing when it is called.
571 This option adds a kernel parameter 'memtest', which allows memtest
573 memtest=0, mean disabled; -- default
574 memtest=1, mean do 1 test pattern;
576 memtest=4, mean do 4 test patterns.
577 If you are unsure how to answer this question, answer N.
579 config X86_SUMMIT_NUMA
581 depends on X86_32 && NUMA && X86_32_NON_STANDARD
583 config X86_CYCLONE_TIMER
585 depends on X86_32_NON_STANDARD
587 source "arch/x86/Kconfig.cpu"
591 prompt "HPET Timer Support" if X86_32
593 Use the IA-PC HPET (High Precision Event Timer) to manage
594 time in preference to the PIT and RTC, if a HPET is
596 HPET is the next generation timer replacing legacy 8254s.
597 The HPET provides a stable time base on SMP
598 systems, unlike the TSC, but it is more expensive to access,
599 as it is off-chip. You can find the HPET spec at
600 <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>.
602 You can safely choose Y here. However, HPET will only be
603 activated if the platform and the BIOS support this feature.
604 Otherwise the 8254 will be used for timing services.
606 Choose N to continue using the legacy 8254 timer.
608 config HPET_EMULATE_RTC
610 depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y)
612 # Mark as embedded because too many people got it wrong.
613 # The code disables itself when not needed.
616 bool "Enable DMI scanning" if EMBEDDED
618 Enabled scanning of DMI to identify machine quirks. Say Y
619 here unless you have verified that your setup is not
620 affected by entries in the DMI blacklist. Required by PNP
624 bool "GART IOMMU support" if EMBEDDED
627 depends on X86_64 && PCI
629 Support for full DMA access of devices with 32bit memory access only
630 on systems with more than 3GB. This is usually needed for USB,
631 sound, many IDE/SATA chipsets and some other devices.
632 Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
633 based hardware IOMMU and a software bounce buffer based IOMMU used
634 on Intel systems and as fallback.
635 The code is only active when needed (enough memory and limited
636 device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
640 bool "IBM Calgary IOMMU support"
642 depends on X86_64 && PCI && EXPERIMENTAL
644 Support for hardware IOMMUs in IBM's xSeries x366 and x460
645 systems. Needed to run systems with more than 3GB of memory
646 properly with 32-bit PCI devices that do not support DAC
647 (Double Address Cycle). Calgary also supports bus level
648 isolation, where all DMAs pass through the IOMMU. This
649 prevents them from going anywhere except their intended
650 destination. This catches hard-to-find kernel bugs and
651 mis-behaving drivers and devices that do not use the DMA-API
652 properly to set up their DMA buffers. The IOMMU can be
653 turned off at boot time with the iommu=off parameter.
654 Normally the kernel will make the right choice by itself.
657 config CALGARY_IOMMU_ENABLED_BY_DEFAULT
659 prompt "Should Calgary be enabled by default?"
660 depends on CALGARY_IOMMU
662 Should Calgary be enabled by default? if you choose 'y', Calgary
663 will be used (if it exists). If you choose 'n', Calgary will not be
664 used even if it exists. If you choose 'n' and would like to use
665 Calgary anyway, pass 'iommu=calgary' on the kernel command line.
669 bool "AMD IOMMU support"
672 depends on X86_64 && PCI && ACPI
674 With this option you can enable support for AMD IOMMU hardware in
675 your system. An IOMMU is a hardware component which provides
676 remapping of DMA memory accesses from devices. With an AMD IOMMU you
677 can isolate the the DMA memory of different devices and protect the
678 system from misbehaving device drivers or hardware.
680 You can find out if your system has an AMD IOMMU if you look into
681 your BIOS for an option to enable it or if you have an IVRS ACPI
684 config AMD_IOMMU_STATS
685 bool "Export AMD IOMMU statistics to debugfs"
689 This option enables code in the AMD IOMMU driver to collect various
690 statistics about whats happening in the driver and exports that
691 information to userspace via debugfs.
694 # need this always selected by IOMMU for the VIA workaround
698 Support for software bounce buffers used on x86-64 systems
699 which don't have a hardware IOMMU (e.g. the current generation
700 of Intel's x86-64 CPUs). Using this PCI devices which can only
701 access 32-bits of memory can be used on systems with more than
702 3 GB of memory. If unsure, say Y.
705 def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
708 def_bool (AMD_IOMMU || DMAR)
711 bool "Configure Maximum number of SMP Processors and NUMA Nodes"
712 depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL
713 select CPUMASK_OFFSTACK
716 Configure maximum number of CPUS and NUMA Nodes for this architecture.
720 int "Maximum number of CPUs" if SMP && !MAXSMP
721 range 2 8 if SMP && X86_32 && !X86_BIGSMP
722 range 2 512 if SMP && !MAXSMP
724 default "4096" if MAXSMP
725 default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000)
728 This allows you to specify the maximum number of CPUs which this
729 kernel will support. The maximum supported value is 512 and the
730 minimum value which makes sense is 2.
732 This is purely to save memory - each supported CPU adds
733 approximately eight kilobytes to the kernel image.
736 bool "SMT (Hyperthreading) scheduler support"
739 SMT scheduler support improves the CPU scheduler's decision making
740 when dealing with Intel Pentium 4 chips with HyperThreading at a
741 cost of slightly increased overhead in some places. If unsure say
746 prompt "Multi-core scheduler support"
749 Multi-core scheduler support improves the CPU scheduler's decision
750 making when dealing with multi-core CPU chips at a cost of slightly
751 increased overhead in some places. If unsure say N here.
753 source "kernel/Kconfig.preempt"
756 bool "Local APIC support on uniprocessors"
757 depends on X86_32 && !SMP && !X86_32_NON_STANDARD
759 A local APIC (Advanced Programmable Interrupt Controller) is an
760 integrated interrupt controller in the CPU. If you have a single-CPU
761 system which has a processor with a local APIC, you can say Y here to
762 enable and use it. If you say Y here even though your machine doesn't
763 have a local APIC, then the kernel will still run with no slowdown at
764 all. The local APIC supports CPU-generated self-interrupts (timer,
765 performance counters), and the NMI watchdog which detects hard
769 bool "IO-APIC support on uniprocessors"
770 depends on X86_UP_APIC
772 An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
773 SMP-capable replacement for PC-style interrupt controllers. Most
774 SMP systems and many recent uniprocessor systems have one.
776 If you have a single-CPU system with an IO-APIC, you can say Y here
777 to use it. If you say Y here even though your machine doesn't have
778 an IO-APIC, then the kernel will still run with no slowdown at all.
780 config X86_LOCAL_APIC
782 depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
786 depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
788 config X86_VISWS_APIC
790 depends on X86_32 && X86_VISWS
792 config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
793 bool "Reroute for broken boot IRQs"
795 depends on X86_IO_APIC
797 This option enables a workaround that fixes a source of
798 spurious interrupts. This is recommended when threaded
799 interrupt handling is used on systems where the generation of
800 superfluous "boot interrupts" cannot be disabled.
802 Some chipsets generate a legacy INTx "boot IRQ" when the IRQ
803 entry in the chipset's IO-APIC is masked (as, e.g. the RT
804 kernel does during interrupt handling). On chipsets where this
805 boot IRQ generation cannot be disabled, this workaround keeps
806 the original IRQ line masked so that only the equivalent "boot
807 IRQ" is delivered to the CPUs. The workaround also tells the
808 kernel to set up the IRQ handler on the boot IRQ line. In this
809 way only one interrupt is delivered to the kernel. Otherwise
810 the spurious second interrupt may cause the kernel to bring
811 down (vital) interrupt lines.
813 Only affects "broken" chipsets. Interrupt sharing may be
814 increased on these systems.
817 bool "Machine Check / overheating reporting"
819 Machine Check support allows the processor to notify the
820 kernel if it detects a problem (e.g. overheating, data corruption).
821 The action the kernel takes depends on the severity of the problem,
822 ranging from warning messages to halting the machine.
826 prompt "Intel MCE features"
827 depends on X86_MCE && X86_LOCAL_APIC
829 Additional support for intel specific MCE features such as
834 prompt "AMD MCE features"
835 depends on X86_MCE && X86_LOCAL_APIC
837 Additional support for AMD specific MCE features such as
838 the DRAM Error Threshold.
840 config X86_ANCIENT_MCE
842 depends on X86_32 && X86_MCE
843 prompt "Support for old Pentium 5 / WinChip machine checks"
845 Include support for machine check handling on old Pentium 5 or WinChip
846 systems. These typically need to be enabled explicitely on the command
849 config X86_MCE_THRESHOLD
850 depends on X86_MCE_AMD || X86_MCE_INTEL
854 config X86_MCE_INJECT
856 tristate "Machine check injector support"
858 Provide support for injecting machine checks for testing purposes.
859 If you don't know what a machine check is and you don't do kernel
860 QA it is safe to say n.
862 config X86_THERMAL_VECTOR
864 depends on X86_MCE_INTEL
867 bool "Enable VM86 support" if EMBEDDED
871 This option is required by programs like DOSEMU to run 16-bit legacy
872 code on X86 processors. It also may be needed by software like
873 XFree86 to initialize some video cards via BIOS. Disabling this
874 option saves about 6k.
877 tristate "Toshiba Laptop support"
880 This adds a driver to safely access the System Management Mode of
881 the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
882 not work on models with a Phoenix BIOS. The System Management Mode
883 is used to set the BIOS and power saving options on Toshiba portables.
885 For information on utilities to make use of this driver see the
886 Toshiba Linux utilities web site at:
887 <http://www.buzzard.org.uk/toshiba/>.
889 Say Y if you intend to run this kernel on a Toshiba portable.
893 tristate "Dell laptop support"
895 This adds a driver to safely access the System Management Mode
896 of the CPU on the Dell Inspiron 8000. The System Management Mode
897 is used to read cpu temperature and cooling fan status and to
898 control the fans on the I8K portables.
900 This driver has been tested only on the Inspiron 8000 but it may
901 also work with other Dell laptops. You can force loading on other
902 models by passing the parameter `force=1' to the module. Use at
905 For information on utilities to make use of this driver see the
906 I8K Linux utilities web site at:
907 <http://people.debian.org/~dz/i8k/>
909 Say Y if you intend to run this kernel on a Dell Inspiron 8000.
912 config X86_REBOOTFIXUPS
913 bool "Enable X86 board specific fixups for reboot"
916 This enables chipset and/or board specific fixups to be done
917 in order to get reboot to work correctly. This is only needed on
918 some combinations of hardware and BIOS. The symptom, for which
919 this config is intended, is when reboot ends with a stalled/hung
922 Currently, the only fixup is for the Geode machines using
923 CS5530A and CS5536 chipsets and the RDC R-321x SoC.
925 Say Y if you want to enable the fixup. Currently, it's safe to
926 enable this option even if you don't need it.
930 tristate "/dev/cpu/microcode - microcode support"
933 If you say Y here, you will be able to update the microcode on
934 certain Intel and AMD processors. The Intel support is for the
935 IA32 family, e.g. Pentium Pro, Pentium II, Pentium III,
936 Pentium 4, Xeon etc. The AMD support is for family 0x10 and
937 0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra.
938 You will obviously need the actual microcode binary data itself
939 which is not shipped with the Linux kernel.
941 This option selects the general module only, you need to select
942 at least one vendor specific module as well.
944 To compile this driver as a module, choose M here: the
945 module will be called microcode.
947 config MICROCODE_INTEL
948 bool "Intel microcode patch loading support"
953 This options enables microcode patch loading support for Intel
956 For latest news and information on obtaining all the required
957 Intel ingredients for this driver, check:
958 <http://www.urbanmyth.org/microcode/>.
961 bool "AMD microcode patch loading support"
965 If you select this option, microcode patch loading support for AMD
966 processors will be enabled.
968 config MICROCODE_OLD_INTERFACE
973 tristate "/dev/cpu/*/msr - Model-specific register support"
975 This device gives privileged processes access to the x86
976 Model-Specific Registers (MSRs). It is a character device with
977 major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
978 MSR accesses are directed to a specific CPU on multi-processor
982 tristate "/dev/cpu/*/cpuid - CPU information support"
984 This device gives processes access to the x86 CPUID instruction to
985 be executed on a specific processor. It is a character device
986 with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
990 tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support"
992 If you select this option, this will provide various x86 CPUs
993 information through debugfs.
996 prompt "High Memory Support"
997 default HIGHMEM4G if !X86_NUMAQ
998 default HIGHMEM64G if X86_NUMAQ
1003 depends on !X86_NUMAQ
1005 Linux can use up to 64 Gigabytes of physical memory on x86 systems.
1006 However, the address space of 32-bit x86 processors is only 4
1007 Gigabytes large. That means that, if you have a large amount of
1008 physical memory, not all of it can be "permanently mapped" by the
1009 kernel. The physical memory that's not permanently mapped is called
1012 If you are compiling a kernel which will never run on a machine with
1013 more than 1 Gigabyte total physical RAM, answer "off" here (default
1014 choice and suitable for most users). This will result in a "3GB/1GB"
1015 split: 3GB are mapped so that each process sees a 3GB virtual memory
1016 space and the remaining part of the 4GB virtual memory space is used
1017 by the kernel to permanently map as much physical memory as
1020 If the machine has between 1 and 4 Gigabytes physical RAM, then
1023 If more than 4 Gigabytes is used then answer "64GB" here. This
1024 selection turns Intel PAE (Physical Address Extension) mode on.
1025 PAE implements 3-level paging on IA32 processors. PAE is fully
1026 supported by Linux, PAE mode is implemented on all recent Intel
1027 processors (Pentium Pro and better). NOTE: If you say "64GB" here,
1028 then the kernel will not boot on CPUs that don't support PAE!
1030 The actual amount of total physical memory will either be
1031 auto detected or can be forced by using a kernel command line option
1032 such as "mem=256M". (Try "man bootparam" or see the documentation of
1033 your boot loader (lilo or loadlin) about how to pass options to the
1034 kernel at boot time.)
1036 If unsure, say "off".
1040 depends on !X86_NUMAQ
1042 Select this if you have a 32-bit processor and between 1 and 4
1043 gigabytes of physical RAM.
1047 depends on !M386 && !M486
1050 Select this if you have a 32-bit processor and more than 4
1051 gigabytes of physical RAM.
1056 depends on EXPERIMENTAL
1057 prompt "Memory split" if EMBEDDED
1061 Select the desired split between kernel and user memory.
1063 If the address range available to the kernel is less than the
1064 physical memory installed, the remaining memory will be available
1065 as "high memory". Accessing high memory is a little more costly
1066 than low memory, as it needs to be mapped into the kernel first.
1067 Note that increasing the kernel address space limits the range
1068 available to user programs, making the address space there
1069 tighter. Selecting anything other than the default 3G/1G split
1070 will also likely make your kernel incompatible with binary-only
1073 If you are not absolutely sure what you are doing, leave this
1077 bool "3G/1G user/kernel split"
1078 config VMSPLIT_3G_OPT
1080 bool "3G/1G user/kernel split (for full 1G low memory)"
1082 bool "2G/2G user/kernel split"
1083 config VMSPLIT_2G_OPT
1085 bool "2G/2G user/kernel split (for full 2G low memory)"
1087 bool "1G/3G user/kernel split"
1092 default 0xB0000000 if VMSPLIT_3G_OPT
1093 default 0x80000000 if VMSPLIT_2G
1094 default 0x78000000 if VMSPLIT_2G_OPT
1095 default 0x40000000 if VMSPLIT_1G
1101 depends on X86_32 && (HIGHMEM64G || HIGHMEM4G)
1104 bool "PAE (Physical Address Extension) Support"
1105 depends on X86_32 && !HIGHMEM4G
1107 PAE is required for NX support, and furthermore enables
1108 larger swapspace support for non-overcommit purposes. It
1109 has the cost of more pagetable lookup overhead, and also
1110 consumes more pagetable space per process.
1112 config ARCH_PHYS_ADDR_T_64BIT
1113 def_bool X86_64 || X86_PAE
1115 config DIRECT_GBPAGES
1116 bool "Enable 1GB pages for kernel pagetables" if EMBEDDED
1120 Allow the kernel linear mapping to use 1GB pages on CPUs that
1121 support it. This can improve the kernel's performance a tiny bit by
1122 reducing TLB pressure. If in doubt, say "Y".
1124 # Common NUMA Features
1126 bool "Numa Memory Allocation and Scheduler Support"
1128 depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
1129 default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
1131 Enable NUMA (Non Uniform Memory Access) support.
1133 The kernel will try to allocate memory used by a CPU on the
1134 local memory controller of the CPU and add some more
1135 NUMA awareness to the kernel.
1137 For 64-bit this is recommended if the system is Intel Core i7
1138 (or later), AMD Opteron, or EM64T NUMA.
1140 For 32-bit this is only needed on (rare) 32-bit-only platforms
1141 that support NUMA topologies, such as NUMAQ / Summit, or if you
1142 boot a 32-bit kernel on a 64-bit NUMA platform.
1144 Otherwise, you should say N.
1146 comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
1147 depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
1151 prompt "Old style AMD Opteron NUMA detection"
1152 depends on X86_64 && NUMA && PCI
1154 Enable K8 NUMA node topology detection. You should say Y here if
1155 you have a multi processor AMD K8 system. This uses an old
1156 method to read the NUMA configuration directly from the builtin
1157 Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
1158 instead, which also takes priority if both are compiled in.
1160 config X86_64_ACPI_NUMA
1162 prompt "ACPI NUMA detection"
1163 depends on X86_64 && NUMA && ACPI && PCI
1166 Enable ACPI SRAT based node topology detection.
1168 # Some NUMA nodes have memory ranges that span
1169 # other nodes. Even though a pfn is valid and
1170 # between a node's start and end pfns, it may not
1171 # reside on that node. See memmap_init_zone()
1173 config NODES_SPAN_OTHER_NODES
1175 depends on X86_64_ACPI_NUMA
1178 bool "NUMA emulation"
1179 depends on X86_64 && NUMA
1181 Enable NUMA emulation. A flat machine will be split
1182 into virtual nodes when booted with "numa=fake=N", where N is the
1183 number of nodes. This is only useful for debugging.
1186 int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
1188 default "9" if MAXSMP
1189 default "6" if X86_64
1190 default "4" if X86_NUMAQ
1192 depends on NEED_MULTIPLE_NODES
1194 Specify the maximum number of NUMA Nodes available on the target
1195 system. Increases memory reserved to accommodate various tables.
1197 config HAVE_ARCH_BOOTMEM
1199 depends on X86_32 && NUMA
1201 config ARCH_HAVE_MEMORY_PRESENT
1203 depends on X86_32 && DISCONTIGMEM
1205 config NEED_NODE_MEMMAP_SIZE
1207 depends on X86_32 && (DISCONTIGMEM || SPARSEMEM)
1209 config HAVE_ARCH_ALLOC_REMAP
1211 depends on X86_32 && NUMA
1213 config ARCH_FLATMEM_ENABLE
1215 depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && !NUMA
1217 config ARCH_DISCONTIGMEM_ENABLE
1219 depends on NUMA && X86_32
1221 config ARCH_DISCONTIGMEM_DEFAULT
1223 depends on NUMA && X86_32
1225 config ARCH_PROC_KCORE_TEXT
1227 depends on X86_64 && PROC_KCORE
1229 config ARCH_SPARSEMEM_DEFAULT
1233 config ARCH_SPARSEMEM_ENABLE
1235 depends on X86_64 || NUMA || (EXPERIMENTAL && X86_32) || X86_32_NON_STANDARD
1236 select SPARSEMEM_STATIC if X86_32
1237 select SPARSEMEM_VMEMMAP_ENABLE if X86_64
1239 config ARCH_SELECT_MEMORY_MODEL
1241 depends on ARCH_SPARSEMEM_ENABLE
1243 config ARCH_MEMORY_PROBE
1245 depends on MEMORY_HOTPLUG
1250 bool "Allocate 3rd-level pagetables from highmem"
1251 depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
1253 The VM uses one page table entry for each page of physical memory.
1254 For systems with a lot of RAM, this can be wasteful of precious
1255 low memory. Setting this option will put user-space page table
1256 entries in high memory.
1258 config X86_CHECK_BIOS_CORRUPTION
1259 bool "Check for low memory corruption"
1261 Periodically check for memory corruption in low memory, which
1262 is suspected to be caused by BIOS. Even when enabled in the
1263 configuration, it is disabled at runtime. Enable it by
1264 setting "memory_corruption_check=1" on the kernel command
1265 line. By default it scans the low 64k of memory every 60
1266 seconds; see the memory_corruption_check_size and
1267 memory_corruption_check_period parameters in
1268 Documentation/kernel-parameters.txt to adjust this.
1270 When enabled with the default parameters, this option has
1271 almost no overhead, as it reserves a relatively small amount
1272 of memory and scans it infrequently. It both detects corruption
1273 and prevents it from affecting the running system.
1275 It is, however, intended as a diagnostic tool; if repeatable
1276 BIOS-originated corruption always affects the same memory,
1277 you can use memmap= to prevent the kernel from using that
1280 config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
1281 bool "Set the default setting of memory_corruption_check"
1282 depends on X86_CHECK_BIOS_CORRUPTION
1285 Set whether the default state of memory_corruption_check is
1288 config X86_RESERVE_LOW_64K
1289 bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
1292 Reserve the first 64K of physical RAM on BIOSes that are known
1293 to potentially corrupt that memory range. A numbers of BIOSes are
1294 known to utilize this area during suspend/resume, so it must not
1295 be used by the kernel.
1297 Set this to N if you are absolutely sure that you trust the BIOS
1298 to get all its memory reservations and usages right.
1300 If you have doubts about the BIOS (e.g. suspend/resume does not
1301 work or there's kernel crashes after certain hardware hotplug
1302 events) and it's not AMI or Phoenix, then you might want to enable
1303 X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
1304 corruption patterns.
1308 config MATH_EMULATION
1310 prompt "Math emulation" if X86_32
1312 Linux can emulate a math coprocessor (used for floating point
1313 operations) if you don't have one. 486DX and Pentium processors have
1314 a math coprocessor built in, 486SX and 386 do not, unless you added
1315 a 487DX or 387, respectively. (The messages during boot time can
1316 give you some hints here ["man dmesg"].) Everyone needs either a
1317 coprocessor or this emulation.
1319 If you don't have a math coprocessor, you need to say Y here; if you
1320 say Y here even though you have a coprocessor, the coprocessor will
1321 be used nevertheless. (This behavior can be changed with the kernel
1322 command line option "no387", which comes handy if your coprocessor
1323 is broken. Try "man bootparam" or see the documentation of your boot
1324 loader (lilo or loadlin) about how to pass options to the kernel at
1325 boot time.) This means that it is a good idea to say Y here if you
1326 intend to use this kernel on different machines.
1328 More information about the internals of the Linux math coprocessor
1329 emulation can be found in <file:arch/x86/math-emu/README>.
1331 If you are not sure, say Y; apart from resulting in a 66 KB bigger
1332 kernel, it won't hurt.
1335 bool "MTRR (Memory Type Range Register) support"
1337 On Intel P6 family processors (Pentium Pro, Pentium II and later)
1338 the Memory Type Range Registers (MTRRs) may be used to control
1339 processor access to memory ranges. This is most useful if you have
1340 a video (VGA) card on a PCI or AGP bus. Enabling write-combining
1341 allows bus write transfers to be combined into a larger transfer
1342 before bursting over the PCI/AGP bus. This can increase performance
1343 of image write operations 2.5 times or more. Saying Y here creates a
1344 /proc/mtrr file which may be used to manipulate your processor's
1345 MTRRs. Typically the X server should use this.
1347 This code has a reasonably generic interface so that similar
1348 control registers on other processors can be easily supported
1351 The Cyrix 6x86, 6x86MX and M II processors have Address Range
1352 Registers (ARRs) which provide a similar functionality to MTRRs. For
1353 these, the ARRs are used to emulate the MTRRs.
1354 The AMD K6-2 (stepping 8 and above) and K6-3 processors have two
1355 MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing
1356 write-combining. All of these processors are supported by this code
1357 and it makes sense to say Y here if you have one of them.
1359 Saying Y here also fixes a problem with buggy SMP BIOSes which only
1360 set the MTRRs for the boot CPU and not for the secondary CPUs. This
1361 can lead to all sorts of problems, so it's good to say Y here.
1363 You can safely say Y even if your machine doesn't have MTRRs, you'll
1364 just add about 9 KB to your kernel.
1366 See <file:Documentation/x86/mtrr.txt> for more information.
1368 config MTRR_SANITIZER
1370 prompt "MTRR cleanup support"
1373 Convert MTRR layout from continuous to discrete, so X drivers can
1374 add writeback entries.
1376 Can be disabled with disable_mtrr_cleanup on the kernel command line.
1377 The largest mtrr entry size for a continuous block can be set with
1382 config MTRR_SANITIZER_ENABLE_DEFAULT
1383 int "MTRR cleanup enable value (0-1)"
1386 depends on MTRR_SANITIZER
1388 Enable mtrr cleanup default value
1390 config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
1391 int "MTRR cleanup spare reg num (0-7)"
1394 depends on MTRR_SANITIZER
1396 mtrr cleanup spare entries default, it can be changed via
1397 mtrr_spare_reg_nr=N on the kernel command line.
1401 prompt "x86 PAT support"
1404 Use PAT attributes to setup page level cache control.
1406 PATs are the modern equivalents of MTRRs and are much more
1407 flexible than MTRRs.
1409 Say N here if you see bootup problems (boot crash, boot hang,
1410 spontaneous reboots) or a non-working video driver.
1414 config ARCH_USES_PG_UNCACHED
1419 bool "EFI runtime service support"
1422 This enables the kernel to use EFI runtime services that are
1423 available (such as the EFI variable services).
1425 This option is only useful on systems that have EFI firmware.
1426 In addition, you should use the latest ELILO loader available
1427 at <http://elilo.sourceforge.net> in order to take advantage
1428 of EFI runtime services. However, even with this option, the
1429 resultant kernel should continue to boot on existing non-EFI
1434 prompt "Enable seccomp to safely compute untrusted bytecode"
1436 This kernel feature is useful for number crunching applications
1437 that may need to compute untrusted bytecode during their
1438 execution. By using pipes or other transports made available to
1439 the process as file descriptors supporting the read/write
1440 syscalls, it's possible to isolate those applications in
1441 their own address space using seccomp. Once seccomp is
1442 enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
1443 and the task is only allowed to execute a few safe syscalls
1444 defined by each seccomp mode.
1446 If unsure, say Y. Only embedded should say N here.
1448 config CC_STACKPROTECTOR
1449 bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
1451 This option turns on the -fstack-protector GCC feature. This
1452 feature puts, at the beginning of functions, a canary value on
1453 the stack just before the return address, and validates
1454 the value just before actually returning. Stack based buffer
1455 overflows (that need to overwrite this return address) now also
1456 overwrite the canary, which gets detected and the attack is then
1457 neutralized via a kernel panic.
1459 This feature requires gcc version 4.2 or above, or a distribution
1460 gcc with the feature backported. Older versions are automatically
1461 detected and for those versions, this configuration option is
1462 ignored. (and a warning is printed during bootup)
1464 source kernel/Kconfig.hz
1467 bool "kexec system call"
1469 kexec is a system call that implements the ability to shutdown your
1470 current kernel, and to start another kernel. It is like a reboot
1471 but it is independent of the system firmware. And like a reboot
1472 you can start any kernel with it, not just Linux.
1474 The name comes from the similarity to the exec system call.
1476 It is an ongoing process to be certain the hardware in a machine
1477 is properly shutdown, so do not be surprised if this code does not
1478 initially work for you. It may help to enable device hotplugging
1479 support. As of this writing the exact hardware interface is
1480 strongly in flux, so no good recommendation can be made.
1483 bool "kernel crash dumps"
1484 depends on X86_64 || (X86_32 && HIGHMEM)
1486 Generate crash dump after being started by kexec.
1487 This should be normally only set in special crash dump kernels
1488 which are loaded in the main kernel with kexec-tools into
1489 a specially reserved region and then later executed after
1490 a crash by kdump/kexec. The crash dump kernel must be compiled
1491 to a memory address not used by the main kernel or BIOS using
1492 PHYSICAL_START, or it must be built as a relocatable image
1493 (CONFIG_RELOCATABLE=y).
1494 For more details see Documentation/kdump/kdump.txt
1497 bool "kexec jump (EXPERIMENTAL)"
1498 depends on EXPERIMENTAL
1499 depends on KEXEC && HIBERNATION
1501 Jump between original kernel and kexeced kernel and invoke
1502 code in physical address mode via KEXEC
1504 config PHYSICAL_START
1505 hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
1508 This gives the physical address where the kernel is loaded.
1510 If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
1511 bzImage will decompress itself to above physical address and
1512 run from there. Otherwise, bzImage will run from the address where
1513 it has been loaded by the boot loader and will ignore above physical
1516 In normal kdump cases one does not have to set/change this option
1517 as now bzImage can be compiled as a completely relocatable image
1518 (CONFIG_RELOCATABLE=y) and be used to load and run from a different
1519 address. This option is mainly useful for the folks who don't want
1520 to use a bzImage for capturing the crash dump and want to use a
1521 vmlinux instead. vmlinux is not relocatable hence a kernel needs
1522 to be specifically compiled to run from a specific memory area
1523 (normally a reserved region) and this option comes handy.
1525 So if you are using bzImage for capturing the crash dump,
1526 leave the value here unchanged to 0x1000000 and set
1527 CONFIG_RELOCATABLE=y. Otherwise if you plan to use vmlinux
1528 for capturing the crash dump change this value to start of
1529 the reserved region. In other words, it can be set based on
1530 the "X" value as specified in the "crashkernel=YM@XM"
1531 command line boot parameter passed to the panic-ed
1532 kernel. Please take a look at Documentation/kdump/kdump.txt
1533 for more details about crash dumps.
1535 Usage of bzImage for capturing the crash dump is recommended as
1536 one does not have to build two kernels. Same kernel can be used
1537 as production kernel and capture kernel. Above option should have
1538 gone away after relocatable bzImage support is introduced. But it
1539 is present because there are users out there who continue to use
1540 vmlinux for dump capture. This option should go away down the
1543 Don't change this unless you know what you are doing.
1546 bool "Build a relocatable kernel"
1549 This builds a kernel image that retains relocation information
1550 so it can be loaded someplace besides the default 1MB.
1551 The relocations tend to make the kernel binary about 10% larger,
1552 but are discarded at runtime.
1554 One use is for the kexec on panic case where the recovery kernel
1555 must live at a different physical address than the primary
1558 Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
1559 it has been loaded at and the compile time physical address
1560 (CONFIG_PHYSICAL_START) is ignored.
1562 # Relocation on x86-32 needs some additional build support
1563 config X86_NEED_RELOCS
1565 depends on X86_32 && RELOCATABLE
1567 config PHYSICAL_ALIGN
1569 prompt "Alignment value to which kernel should be aligned" if X86_32
1571 range 0x2000 0x1000000
1573 This value puts the alignment restrictions on physical address
1574 where kernel is loaded and run from. Kernel is compiled for an
1575 address which meets above alignment restriction.
1577 If bootloader loads the kernel at a non-aligned address and
1578 CONFIG_RELOCATABLE is set, kernel will move itself to nearest
1579 address aligned to above value and run from there.
1581 If bootloader loads the kernel at a non-aligned address and
1582 CONFIG_RELOCATABLE is not set, kernel will ignore the run time
1583 load address and decompress itself to the address it has been
1584 compiled for and run from there. The address for which kernel is
1585 compiled already meets above alignment restrictions. Hence the
1586 end result is that kernel runs from a physical address meeting
1587 above alignment restrictions.
1589 Don't change this unless you know what you are doing.
1592 bool "Support for hot-pluggable CPUs"
1593 depends on SMP && HOTPLUG
1595 Say Y here to allow turning CPUs off and on. CPUs can be
1596 controlled through /sys/devices/system/cpu.
1597 ( Note: power management support will enable this option
1598 automatically on SMP systems. )
1599 Say N if you want to disable CPU hotplug.
1603 prompt "Compat VDSO support"
1604 depends on X86_32 || IA32_EMULATION
1606 Map the 32-bit VDSO to the predictable old-style address too.
1608 Say N here if you are running a sufficiently recent glibc
1609 version (2.3.3 or later), to remove the high-mapped
1610 VDSO mapping and to exclusively use the randomized VDSO.
1615 bool "Built-in kernel command line"
1618 Allow for specifying boot arguments to the kernel at
1619 build time. On some systems (e.g. embedded ones), it is
1620 necessary or convenient to provide some or all of the
1621 kernel boot arguments with the kernel itself (that is,
1622 to not rely on the boot loader to provide them.)
1624 To compile command line arguments into the kernel,
1625 set this option to 'Y', then fill in the
1626 the boot arguments in CONFIG_CMDLINE.
1628 Systems with fully functional boot loaders (i.e. non-embedded)
1629 should leave this option set to 'N'.
1632 string "Built-in kernel command string"
1633 depends on CMDLINE_BOOL
1636 Enter arguments here that should be compiled into the kernel
1637 image and used at boot time. If the boot loader provides a
1638 command line at boot time, it is appended to this string to
1639 form the full kernel command line, when the system boots.
1641 However, you can use the CONFIG_CMDLINE_OVERRIDE option to
1642 change this behavior.
1644 In most cases, the command line (whether built-in or provided
1645 by the boot loader) should specify the device for the root
1648 config CMDLINE_OVERRIDE
1649 bool "Built-in command line overrides boot loader arguments"
1651 depends on CMDLINE_BOOL
1653 Set this option to 'Y' to have the kernel ignore the boot loader
1654 command line, and use ONLY the built-in command line.
1656 This is used to work around broken boot loaders. This should
1657 be set to 'N' under normal conditions.
1661 config ARCH_ENABLE_MEMORY_HOTPLUG
1663 depends on X86_64 || (X86_32 && HIGHMEM)
1665 config ARCH_ENABLE_MEMORY_HOTREMOVE
1667 depends on MEMORY_HOTPLUG
1669 config HAVE_ARCH_EARLY_PFN_TO_NID
1673 menu "Power management and ACPI options"
1675 config ARCH_HIBERNATION_HEADER
1677 depends on X86_64 && HIBERNATION
1679 source "kernel/power/Kconfig"
1681 source "drivers/acpi/Kconfig"
1683 source "drivers/sfi/Kconfig"
1688 depends on APM || APM_MODULE
1691 tristate "APM (Advanced Power Management) BIOS support"
1692 depends on X86_32 && PM_SLEEP
1694 APM is a BIOS specification for saving power using several different
1695 techniques. This is mostly useful for battery powered laptops with
1696 APM compliant BIOSes. If you say Y here, the system time will be
1697 reset after a RESUME operation, the /proc/apm device will provide
1698 battery status information, and user-space programs will receive
1699 notification of APM "events" (e.g. battery status change).
1701 If you select "Y" here, you can disable actual use of the APM
1702 BIOS by passing the "apm=off" option to the kernel at boot time.
1704 Note that the APM support is almost completely disabled for
1705 machines with more than one CPU.
1707 In order to use APM, you will need supporting software. For location
1708 and more information, read <file:Documentation/power/pm.txt> and the
1709 Battery Powered Linux mini-HOWTO, available from
1710 <http://www.tldp.org/docs.html#howto>.
1712 This driver does not spin down disk drives (see the hdparm(8)
1713 manpage ("man 8 hdparm") for that), and it doesn't turn off
1714 VESA-compliant "green" monitors.
1716 This driver does not support the TI 4000M TravelMate and the ACER
1717 486/DX4/75 because they don't have compliant BIOSes. Many "green"
1718 desktop machines also don't have compliant BIOSes, and this driver
1719 may cause those machines to panic during the boot phase.
1721 Generally, if you don't have a battery in your machine, there isn't
1722 much point in using this driver and you should say N. If you get
1723 random kernel OOPSes or reboots that don't seem to be related to
1724 anything, try disabling/enabling this option (or disabling/enabling
1727 Some other things you should try when experiencing seemingly random,
1730 1) make sure that you have enough swap space and that it is
1732 2) pass the "no-hlt" option to the kernel
1733 3) switch on floating point emulation in the kernel and pass
1734 the "no387" option to the kernel
1735 4) pass the "floppy=nodma" option to the kernel
1736 5) pass the "mem=4M" option to the kernel (thereby disabling
1737 all but the first 4 MB of RAM)
1738 6) make sure that the CPU is not over clocked.
1739 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
1740 8) disable the cache from your BIOS settings
1741 9) install a fan for the video card or exchange video RAM
1742 10) install a better fan for the CPU
1743 11) exchange RAM chips
1744 12) exchange the motherboard.
1746 To compile this driver as a module, choose M here: the
1747 module will be called apm.
1751 config APM_IGNORE_USER_SUSPEND
1752 bool "Ignore USER SUSPEND"
1754 This option will ignore USER SUSPEND requests. On machines with a
1755 compliant APM BIOS, you want to say N. However, on the NEC Versa M
1756 series notebooks, it is necessary to say Y because of a BIOS bug.
1758 config APM_DO_ENABLE
1759 bool "Enable PM at boot time"
1761 Enable APM features at boot time. From page 36 of the APM BIOS
1762 specification: "When disabled, the APM BIOS does not automatically
1763 power manage devices, enter the Standby State, enter the Suspend
1764 State, or take power saving steps in response to CPU Idle calls."
1765 This driver will make CPU Idle calls when Linux is idle (unless this
1766 feature is turned off -- see "Do CPU IDLE calls", below). This
1767 should always save battery power, but more complicated APM features
1768 will be dependent on your BIOS implementation. You may need to turn
1769 this option off if your computer hangs at boot time when using APM
1770 support, or if it beeps continuously instead of suspending. Turn
1771 this off if you have a NEC UltraLite Versa 33/C or a Toshiba
1772 T400CDT. This is off by default since most machines do fine without
1776 bool "Make CPU Idle calls when idle"
1778 Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
1779 On some machines, this can activate improved power savings, such as
1780 a slowed CPU clock rate, when the machine is idle. These idle calls
1781 are made after the idle loop has run for some length of time (e.g.,
1782 333 mS). On some machines, this will cause a hang at boot time or
1783 whenever the CPU becomes idle. (On machines with more than one CPU,
1784 this option does nothing.)
1786 config APM_DISPLAY_BLANK
1787 bool "Enable console blanking using APM"
1789 Enable console blanking using the APM. Some laptops can use this to
1790 turn off the LCD backlight when the screen blanker of the Linux
1791 virtual console blanks the screen. Note that this is only used by
1792 the virtual console screen blanker, and won't turn off the backlight
1793 when using the X Window system. This also doesn't have anything to
1794 do with your VESA-compliant power-saving monitor. Further, this
1795 option doesn't work for all laptops -- it might not turn off your
1796 backlight at all, or it might print a lot of errors to the console,
1797 especially if you are using gpm.
1799 config APM_ALLOW_INTS
1800 bool "Allow interrupts during APM BIOS calls"
1802 Normally we disable external interrupts while we are making calls to
1803 the APM BIOS as a measure to lessen the effects of a badly behaving
1804 BIOS implementation. The BIOS should reenable interrupts if it
1805 needs to. Unfortunately, some BIOSes do not -- especially those in
1806 many of the newer IBM Thinkpads. If you experience hangs when you
1807 suspend, try setting this to Y. Otherwise, say N.
1811 source "arch/x86/kernel/cpu/cpufreq/Kconfig"
1813 source "drivers/cpuidle/Kconfig"
1815 source "drivers/idle/Kconfig"
1820 menu "Bus options (PCI etc.)"
1825 select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
1827 Find out whether you have a PCI motherboard. PCI is the name of a
1828 bus system, i.e. the way the CPU talks to the other stuff inside
1829 your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
1830 VESA. If you have PCI, say Y, otherwise N.
1833 prompt "PCI access mode"
1834 depends on X86_32 && PCI
1837 On PCI systems, the BIOS can be used to detect the PCI devices and
1838 determine their configuration. However, some old PCI motherboards
1839 have BIOS bugs and may crash if this is done. Also, some embedded
1840 PCI-based systems don't have any BIOS at all. Linux can also try to
1841 detect the PCI hardware directly without using the BIOS.
1843 With this option, you can specify how Linux should detect the
1844 PCI devices. If you choose "BIOS", the BIOS will be used,
1845 if you choose "Direct", the BIOS won't be used, and if you
1846 choose "MMConfig", then PCI Express MMCONFIG will be used.
1847 If you choose "Any", the kernel will try MMCONFIG, then the
1848 direct access method and falls back to the BIOS if that doesn't
1849 work. If unsure, go with the default, which is "Any".
1854 config PCI_GOMMCONFIG
1871 depends on X86_32 && PCI && (PCI_GOBIOS || PCI_GOANY)
1873 # x86-64 doesn't support PCI BIOS access from long mode so always go direct.
1876 depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC))
1880 depends on X86_32 && PCI && (ACPI || SFI) && (PCI_GOMMCONFIG || PCI_GOANY)
1884 depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY)
1891 bool "Support mmconfig PCI config space access"
1892 depends on X86_64 && PCI && ACPI
1895 bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
1896 depends on PCI_MSI && ACPI && EXPERIMENTAL
1898 DMA remapping (DMAR) devices support enables independent address
1899 translations for Direct Memory Access (DMA) from devices.
1900 These DMA remapping devices are reported via ACPI tables
1901 and include PCI device scope covered by these DMA
1904 config DMAR_DEFAULT_ON
1906 prompt "Enable DMA Remapping Devices by default"
1909 Selecting this option will enable a DMAR device at boot time if
1910 one is found. If this option is not selected, DMAR support can
1911 be enabled by passing intel_iommu=on to the kernel. It is
1912 recommended you say N here while the DMAR code remains
1915 config DMAR_BROKEN_GFX_WA
1917 prompt "Workaround broken graphics drivers (going away soon)"
1918 depends on DMAR && BROKEN
1920 Current Graphics drivers tend to use physical address
1921 for DMA and avoid using DMA APIs. Setting this config
1922 option permits the IOMMU driver to set a unity map for
1923 all the OS-visible memory. Hence the driver can continue
1924 to use physical addresses for DMA, at least until this
1925 option is removed in the 2.6.32 kernel.
1927 config DMAR_FLOPPY_WA
1931 Floppy disk drivers are known to bypass DMA API calls
1932 thereby failing to work when IOMMU is enabled. This
1933 workaround will setup a 1:1 mapping for the first
1934 16MiB to make floppy (an ISA device) work.
1937 bool "Support for Interrupt Remapping (EXPERIMENTAL)"
1938 depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
1940 Supports Interrupt remapping for IO-APIC and MSI devices.
1941 To use x2apic mode in the CPU's which support x2APIC enhancements or
1942 to support platforms with CPU's having > 8 bit APIC ID, say Y.
1944 source "drivers/pci/pcie/Kconfig"
1946 source "drivers/pci/Kconfig"
1948 # x86_64 have no ISA slots, but do have ISA-style DMA.
1957 Find out whether you have ISA slots on your motherboard. ISA is the
1958 name of a bus system, i.e. the way the CPU talks to the other stuff
1959 inside your box. Other bus systems are PCI, EISA, MicroChannel
1960 (MCA) or VESA. ISA is an older system, now being displaced by PCI;
1961 newer boards don't support it. If you have ISA, say Y, otherwise N.
1967 The Extended Industry Standard Architecture (EISA) bus was
1968 developed as an open alternative to the IBM MicroChannel bus.
1970 The EISA bus provided some of the features of the IBM MicroChannel
1971 bus while maintaining backward compatibility with cards made for
1972 the older ISA bus. The EISA bus saw limited use between 1988 and
1973 1995 when it was made obsolete by the PCI bus.
1975 Say Y here if you are building a kernel for an EISA-based machine.
1979 source "drivers/eisa/Kconfig"
1984 MicroChannel Architecture is found in some IBM PS/2 machines and
1985 laptops. It is a bus system similar to PCI or ISA. See
1986 <file:Documentation/mca.txt> (and especially the web page given
1987 there) before attempting to build an MCA bus kernel.
1989 source "drivers/mca/Kconfig"
1992 tristate "NatSemi SCx200 support"
1994 This provides basic support for National Semiconductor's
1995 (now AMD's) Geode processors. The driver probes for the
1996 PCI-IDs of several on-chip devices, so its a good dependency
1997 for other scx200_* drivers.
1999 If compiled as a module, the driver is named scx200.
2001 config SCx200HR_TIMER
2002 tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
2003 depends on SCx200 && GENERIC_TIME
2006 This driver provides a clocksource built upon the on-chip
2007 27MHz high-resolution timer. Its also a workaround for
2008 NSC Geode SC-1100's buggy TSC, which loses time when the
2009 processor goes idle (as is done by the scheduler). The
2010 other workaround is idle=poll boot option.
2012 config GEODE_MFGPT_TIMER
2014 prompt "Geode Multi-Function General Purpose Timer (MFGPT) events"
2015 depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
2017 This driver provides a clock event source based on the MFGPT
2018 timer(s) in the CS5535 and CS5536 companion chip for the geode.
2019 MFGPTs have a better resolution and max interval than the
2020 generic PIT, and are suitable for use as high-res timers.
2023 bool "One Laptop Per Child support"
2026 Add support for detecting the unique features of the OLPC
2033 depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA)))
2035 source "drivers/pcmcia/Kconfig"
2037 source "drivers/pci/hotplug/Kconfig"
2042 menu "Executable file formats / Emulations"
2044 source "fs/Kconfig.binfmt"
2046 config IA32_EMULATION
2047 bool "IA32 Emulation"
2049 select COMPAT_BINFMT_ELF
2051 Include code to run 32-bit programs under a 64-bit kernel. You should
2052 likely turn this on, unless you're 100% sure that you don't have any
2053 32-bit programs left.
2056 tristate "IA32 a.out support"
2057 depends on IA32_EMULATION
2059 Support old a.out binaries in the 32bit emulation.
2063 depends on IA32_EMULATION
2065 config COMPAT_FOR_U64_ALIGNMENT
2069 config SYSVIPC_COMPAT
2071 depends on COMPAT && SYSVIPC
2076 config HAVE_ATOMIC_IOMAP
2080 source "net/Kconfig"
2082 source "drivers/Kconfig"
2084 source "drivers/firmware/Kconfig"
2088 source "arch/x86/Kconfig.debug"
2090 source "security/Kconfig"
2092 source "crypto/Kconfig"
2094 source "arch/x86/kvm/Kconfig"
2096 source "lib/Kconfig"