?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Un-inline get_pipe_info() helper function
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / block / xd.c
blob4abd2bcd20fb8b069362e2684c8eed2dcd6a0620
1 /*
2 * This file contains the driver for an XT hard disk controller
3 * (at least the DTC 5150X) for Linux.
4 *
5 * Author: Pat Mackinlay, pat@it.com.au
6 * Date: 29/09/92
7 *
8 * Revised: 01/01/93, ...
9 *
10 * Ref: DTC 5150X Controller Specification (thanks to Kevin Fowler,
11 * kevinf@agora.rain.com)
12 * Also thanks to: Salvador Abreu, Dave Thaler, Risto Kankkunen and
13 * Wim Van Dorst.
14 *
15 * Revised: 04/04/94 by Risto Kankkunen
16 * Moved the detection code from xd_init() to xd_geninit() as it needed
17 * interrupts enabled and Linus didn't want to enable them in that first
18 * phase. xd_geninit() is the place to do these kinds of things anyway,
19 * he says.
20 *
21 * Modularized: 04/10/96 by Todd Fries, tfries@umr.edu
22 *
23 * Revised: 13/12/97 by Andrzej Krzysztofowicz, ankry@mif.pg.gda.pl
24 * Fixed some problems with disk initialization and module initiation.
25 * Added support for manual geometry setting (except Seagate controllers)
26 * in form:
27 * xd_geo=<cyl_xda>,<head_xda>,<sec_xda>[,<cyl_xdb>,<head_xdb>,<sec_xdb>]
28 * Recovered DMA access. Abridged messages. Added support for DTC5051CX,
29 * WD1002-27X & XEBEC controllers. Driver uses now some jumper settings.
30 * Extended ioctl() support.
31 *
32 * Bugfix: 15/02/01, Paul G. - inform queue layer of tiny xd_maxsect.
33 *
34 */
35
36 #include <linux/module.h>
37 #include <linux/errno.h>
38 #include <linux/interrupt.h>
39 #include <linux/mm.h>
40 #include <linux/fs.h>
41 #include <linux/kernel.h>
42 #include <linux/timer.h>
43 #include <linux/genhd.h>
44 #include <linux/hdreg.h>
45 #include <linux/ioport.h>
46 #include <linux/init.h>
47 #include <linux/wait.h>
48 #include <linux/blkdev.h>
49 #include <linux/mutex.h>
50 #include <linux/blkpg.h>
51 #include <linux/delay.h>
52 #include <linux/io.h>
53 #include <linux/gfp.h>
54
55 #include <asm/system.h>
56 #include <asm/uaccess.h>
57 #include <asm/dma.h>
58
59 #include "xd.h"
60
61 static DEFINE_MUTEX(xd_mutex);
62 static void __init do_xd_setup (int *integers);
63 #ifdef MODULE
64 static int xd[5] = { -1,-1,-1,-1, };
65 #endif
66
67 #define XD_DONT_USE_DMA 0 /* Initial value. may be overriden using
68 "nodma" module option */
69 #define XD_INIT_DISK_DELAY (30) /* 30 ms delay during disk initialization */
70
71 /* Above may need to be increased if a problem with the 2nd drive detection
72 (ST11M controller) or resetting a controller (WD) appears */
73
74 static XD_INFO xd_info[XD_MAXDRIVES];
75
76 /* If you try this driver and find that your card is not detected by the driver at bootup, you need to add your BIOS
77 signature and details to the following list of signatures. A BIOS signature is a string embedded into the first
78 few bytes of your controller's on-board ROM BIOS. To find out what yours is, use something like MS-DOS's DEBUG
79 command. Run DEBUG, and then you can examine your BIOS signature with:
80
81 d xxxx:0000
82
83 where xxxx is the segment of your controller (like C800 or D000 or something). On the ASCII dump at the right, you should
84 be able to see a string mentioning the manufacturer's copyright etc. Add this string into the table below. The parameters
85 in the table are, in order:
86
87 offset ; this is the offset (in bytes) from the start of your ROM where the signature starts
88 signature ; this is the actual text of the signature
89 xd_?_init_controller ; this is the controller init routine used by your controller
90 xd_?_init_drive ; this is the drive init routine used by your controller
91
92 The controllers directly supported at the moment are: DTC 5150x, WD 1004A27X, ST11M/R and override. If your controller is
93 made by the same manufacturer as one of these, try using the same init routines as they do. If that doesn't work, your
94 best bet is to use the "override" routines. These routines use a "portable" method of getting the disk's geometry, and
95 may work with your card. If none of these seem to work, try sending me some email and I'll see what I can do <grin>.
96
97 NOTE: You can now specify your XT controller's parameters from the command line in the form xd=TYPE,IRQ,IO,DMA. The driver
98 should be able to detect your drive's geometry from this info. (eg: xd=0,5,0x320,3 is the "standard"). */
99
100 #include <asm/page.h>
101 #define xd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL,get_order(size))
102 #define xd_dma_mem_free(addr, size) free_pages(addr, get_order(size))
103 static char *xd_dma_buffer;
104
105 static XD_SIGNATURE xd_sigs[] __initdata = {
106 { 0x0000,"Override geometry handler",NULL,xd_override_init_drive,"n unknown" }, /* Pat Mackinlay, pat@it.com.au */
107 { 0x0008,"[BXD06 (C) DTC 17-MAY-1985]",xd_dtc_init_controller,xd_dtc5150cx_init_drive," DTC 5150CX" }, /* Andrzej Krzysztofowicz, ankry@mif.pg.gda.pl */
108 { 0x000B,"CRD18A Not an IBM rom. (C) Copyright Data Technology Corp. 05/31/88",xd_dtc_init_controller,xd_dtc_init_drive," DTC 5150X" }, /* Todd Fries, tfries@umr.edu */
109 { 0x000B,"CXD23A Not an IBM ROM (C)Copyright Data Technology Corp 12/03/88",xd_dtc_init_controller,xd_dtc_init_drive," DTC 5150X" }, /* Pat Mackinlay, pat@it.com.au */
110 { 0x0008,"07/15/86(C) Copyright 1986 Western Digital Corp.",xd_wd_init_controller,xd_wd_init_drive," Western Dig. 1002-27X" }, /* Andrzej Krzysztofowicz, ankry@mif.pg.gda.pl */
111 { 0x0008,"06/24/88(C) Copyright 1988 Western Digital Corp.",xd_wd_init_controller,xd_wd_init_drive," Western Dig. WDXT-GEN2" }, /* Dan Newcombe, newcombe@aa.csc.peachnet.edu */
112 { 0x0015,"SEAGATE ST11 BIOS REVISION",xd_seagate_init_controller,xd_seagate_init_drive," Seagate ST11M/R" }, /* Salvador Abreu, spa@fct.unl.pt */
113 { 0x0010,"ST11R BIOS",xd_seagate_init_controller,xd_seagate_init_drive," Seagate ST11M/R" }, /* Risto Kankkunen, risto.kankkunen@cs.helsinki.fi */
114 { 0x0010,"ST11 BIOS v1.7",xd_seagate_init_controller,xd_seagate_init_drive," Seagate ST11R" }, /* Alan Hourihane, alanh@fairlite.demon.co.uk */
115 { 0x1000,"(c)Copyright 1987 SMS",xd_omti_init_controller,xd_omti_init_drive,"n OMTI 5520" }, /* Dirk Melchers, dirk@merlin.nbg.sub.org */
116 { 0x0006,"COPYRIGHT XEBEC (C) 1984",xd_xebec_init_controller,xd_xebec_init_drive," XEBEC" }, /* Andrzej Krzysztofowicz, ankry@mif.pg.gda.pl */
117 { 0x0008,"(C) Copyright 1984 Western Digital Corp", xd_wd_init_controller, xd_wd_init_drive," Western Dig. 1002s-wx2" },
118 { 0x0008,"(C) Copyright 1986 Western Digital Corporation", xd_wd_init_controller, xd_wd_init_drive," 1986 Western Digital" }, /* jfree@sovereign.org */
119 };
120
121 static unsigned int xd_bases[] __initdata =
122 {
123 0xC8000, 0xCA000, 0xCC000,
124 0xCE000, 0xD0000, 0xD2000,
125 0xD4000, 0xD6000, 0xD8000,
126 0xDA000, 0xDC000, 0xDE000,
127 0xE0000
128 };
129
130 static DEFINE_SPINLOCK(xd_lock);
131
132 static struct gendisk *xd_gendisk[2];
133
134 static int xd_getgeo(struct block_device *bdev, struct hd_geometry *geo);
135
136 static const struct block_device_operations xd_fops = {
137 .owner = THIS_MODULE,
138 .ioctl = xd_ioctl,
139 .getgeo = xd_getgeo,
140 };
141 static DECLARE_WAIT_QUEUE_HEAD(xd_wait_int);
142 static u_char xd_drives, xd_irq = 5, xd_dma = 3, xd_maxsectors;
143 static u_char xd_override __initdata = 0, xd_type __initdata = 0;
144 static u_short xd_iobase = 0x320;
145 static int xd_geo[XD_MAXDRIVES*3] __initdata = { 0, };
146
147 static volatile int xdc_busy;
148 static struct timer_list xd_watchdog_int;
149
150 static volatile u_char xd_error;
151 static int nodma = XD_DONT_USE_DMA;
152
153 static struct request_queue *xd_queue;
154
155 /* xd_init: register the block device number and set up pointer tables */
156 static int __init xd_init(void)
157 {
158 u_char i,controller;
159 unsigned int address;
160 int err;
161
162 #ifdef MODULE
163 {
164 u_char count = 0;
165 for (i = 4; i > 0; i--)
166 if (((xd[i] = xd[i-1]) >= 0) && !count)
167 count = i;
168 if ((xd[0] = count))
169 do_xd_setup(xd);
170 }
171 #endif
172
173 init_timer (&xd_watchdog_int); xd_watchdog_int.function = xd_watchdog;
174
175 err = -EBUSY;
176 if (register_blkdev(XT_DISK_MAJOR, "xd"))
177 goto out1;
178
179 err = -ENOMEM;
180 xd_queue = blk_init_queue(do_xd_request, &xd_lock);
181 if (!xd_queue)
182 goto out1a;
183
184 if (xd_detect(&controller,&address)) {
185
186 printk("Detected a%s controller (type %d) at address %06x\n",
187 xd_sigs[controller].name,controller,address);
188 if (!request_region(xd_iobase,4,"xd")) {
189 printk("xd: Ports at 0x%x are not available\n",
190 xd_iobase);
191 goto out2;
192 }
193 if (controller)
194 xd_sigs[controller].init_controller(address);
195 xd_drives = xd_initdrives(xd_sigs[controller].init_drive);
196
197 printk("Detected %d hard drive%s (using IRQ%d & DMA%d)\n",
198 xd_drives,xd_drives == 1 ? "" : "s",xd_irq,xd_dma);
199 }
200
201 /*
202 * With the drive detected, xd_maxsectors should now be known.
203 * If xd_maxsectors is 0, nothing was detected and we fall through
204 * to return -ENODEV
205 */
206 if (!xd_dma_buffer && xd_maxsectors) {
207 xd_dma_buffer = (char *)xd_dma_mem_alloc(xd_maxsectors * 0x200);
208 if (!xd_dma_buffer) {
209 printk(KERN_ERR "xd: Out of memory.\n");
210 goto out3;
211 }
212 }
213
214 err = -ENODEV;
215 if (!xd_drives)
216 goto out3;
217
218 for (i = 0; i < xd_drives; i++) {
219 XD_INFO *p = &xd_info[i];
220 struct gendisk *disk = alloc_disk(64);
221 if (!disk)
222 goto Enomem;
223 p->unit = i;
224 disk->major = XT_DISK_MAJOR;
225 disk->first_minor = i<<6;
226 sprintf(disk->disk_name, "xd%c", i+'a');
227 disk->fops = &xd_fops;
228 disk->private_data = p;
229 disk->queue = xd_queue;
230 set_capacity(disk, p->heads * p->cylinders * p->sectors);
231 printk(" %s: CHS=%d/%d/%d\n", disk->disk_name,
232 p->cylinders, p->heads, p->sectors);
233 xd_gendisk[i] = disk;
234 }
235
236 err = -EBUSY;
237 if (request_irq(xd_irq,xd_interrupt_handler, 0, "XT hard disk", NULL)) {
238 printk("xd: unable to get IRQ%d\n",xd_irq);
239 goto out4;
240 }
241
242 if (request_dma(xd_dma,"xd")) {
243 printk("xd: unable to get DMA%d\n",xd_dma);
244 goto out5;
245 }
246
247 /* xd_maxsectors depends on controller - so set after detection */
248 blk_queue_max_hw_sectors(xd_queue, xd_maxsectors);
249
250 for (i = 0; i < xd_drives; i++)
251 add_disk(xd_gendisk[i]);
252
253 return 0;
254
255 out5:
256 free_irq(xd_irq, NULL);
257 out4:
258 for (i = 0; i < xd_drives; i++)
259 put_disk(xd_gendisk[i]);
260 out3:
261 if (xd_maxsectors)
262 release_region(xd_iobase,4);
263
264 if (xd_dma_buffer)
265 xd_dma_mem_free((unsigned long)xd_dma_buffer,
266 xd_maxsectors * 0x200);
267 out2:
268 blk_cleanup_queue(xd_queue);
269 out1a:
270 unregister_blkdev(XT_DISK_MAJOR, "xd");
271 out1:
272 return err;
273 Enomem:
274 err = -ENOMEM;
275 while (i--)
276 put_disk(xd_gendisk[i]);
277 goto out3;
278 }
279
280 /* xd_detect: scan the possible BIOS ROM locations for the signature strings */
281 static u_char __init xd_detect (u_char *controller, unsigned int *address)
282 {
283 int i, j;
284
285 if (xd_override)
286 {
287 *controller = xd_type;
288 *address = 0;
289 return(1);
290 }
291
292 for (i = 0; i < ARRAY_SIZE(xd_bases); i++) {
293 void __iomem *p = ioremap(xd_bases[i], 0x2000);
294 if (!p)
295 continue;
296 for (j = 1; j < ARRAY_SIZE(xd_sigs); j++) {
297 const char *s = xd_sigs[j].string;
298 if (check_signature(p + xd_sigs[j].offset, s, strlen(s))) {
299 *controller = j;
300 xd_type = j;
301 *address = xd_bases[i];
302 iounmap(p);
303 return 1;
304 }
305 }
306 iounmap(p);
307 }
308 return 0;
309 }
310
311 /* do_xd_request: handle an incoming request */
312 static void do_xd_request (struct request_queue * q)
313 {
314 struct request *req;
315
316 if (xdc_busy)
317 return;
318
319 req = blk_fetch_request(q);
320 while (req) {
321 unsigned block = blk_rq_pos(req);
322 unsigned count = blk_rq_cur_sectors(req);
323 XD_INFO *disk = req->rq_disk->private_data;
324 int res = -EIO;
325 int retry;
326
327 if (req->cmd_type != REQ_TYPE_FS)
328 goto done;
329 if (block + count > get_capacity(req->rq_disk))
330 goto done;
331 for (retry = 0; (retry < XD_RETRIES) && !res; retry++)
332 res = xd_readwrite(rq_data_dir(req), disk, req->buffer,
333 block, count);
334 done:
335 /* wrap up, 0 = success, -errno = fail */
336 if (!__blk_end_request_cur(req, res))
337 req = blk_fetch_request(q);
338 }
339 }
340
341 static int xd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
342 {
343 XD_INFO *p = bdev->bd_disk->private_data;
344
345 geo->heads = p->heads;
346 geo->sectors = p->sectors;
347 geo->cylinders = p->cylinders;
348 return 0;
349 }
350
351 /* xd_ioctl: handle device ioctl's */
352 static int xd_locked_ioctl(struct block_device *bdev, fmode_t mode, u_int cmd, u_long arg)
353 {
354 switch (cmd) {
355 case HDIO_SET_DMA:
356 if (!capable(CAP_SYS_ADMIN)) return -EACCES;
357 if (xdc_busy) return -EBUSY;
358 nodma = !arg;
359 if (nodma && xd_dma_buffer) {
360 xd_dma_mem_free((unsigned long)xd_dma_buffer,
361 xd_maxsectors * 0x200);
362 xd_dma_buffer = NULL;
363 } else if (!nodma && !xd_dma_buffer) {
364 xd_dma_buffer = (char *)xd_dma_mem_alloc(xd_maxsectors * 0x200);
365 if (!xd_dma_buffer) {
366 nodma = XD_DONT_USE_DMA;
367 return -ENOMEM;
368 }
369 }
370 return 0;
371 case HDIO_GET_DMA:
372 return put_user(!nodma, (long __user *) arg);
373 case HDIO_GET_MULTCOUNT:
374 return put_user(xd_maxsectors, (long __user *) arg);
375 default:
376 return -EINVAL;
377 }
378 }
379
380 static int xd_ioctl(struct block_device *bdev, fmode_t mode,
381 unsigned int cmd, unsigned long param)
382 {
383 int ret;
384
385 mutex_lock(&xd_mutex);
386 ret = xd_locked_ioctl(bdev, mode, cmd, param);
387 mutex_unlock(&xd_mutex);
388
389 return ret;
390 }
391
392 /* xd_readwrite: handle a read/write request */
393 static int xd_readwrite (u_char operation,XD_INFO *p,char *buffer,u_int block,u_int count)
394 {
395 int drive = p->unit;
396 u_char cmdblk[6],sense[4];
397 u_short track,cylinder;
398 u_char head,sector,control,mode = PIO_MODE,temp;
399 char **real_buffer;
400 register int i;
401
402 #ifdef DEBUG_READWRITE
403 printk("xd_readwrite: operation = %s, drive = %d, buffer = 0x%X, block = %d, count = %d\n",operation == READ ? "read" : "write",drive,buffer,block,count);
404 #endif /* DEBUG_READWRITE */
405
406 spin_unlock_irq(&xd_lock);
407
408 control = p->control;
409 if (!xd_dma_buffer)
410 xd_dma_buffer = (char *)xd_dma_mem_alloc(xd_maxsectors * 0x200);
411 while (count) {
412 temp = count < xd_maxsectors ? count : xd_maxsectors;
413
414 track = block / p->sectors;
415 head = track % p->heads;
416 cylinder = track / p->heads;
417 sector = block % p->sectors;
418
419 #ifdef DEBUG_READWRITE
420 printk("xd_readwrite: drive = %d, head = %d, cylinder = %d, sector = %d, count = %d\n",drive,head,cylinder,sector,temp);
421 #endif /* DEBUG_READWRITE */
422
423 if (xd_dma_buffer) {
424 mode = xd_setup_dma(operation == READ ? DMA_MODE_READ : DMA_MODE_WRITE,(u_char *)(xd_dma_buffer),temp * 0x200);
425 real_buffer = &xd_dma_buffer;
426 for (i=0; i < (temp * 0x200); i++)
427 xd_dma_buffer[i] = buffer[i];
428 }
429 else
430 real_buffer = &buffer;
431
432 xd_build(cmdblk,operation == READ ? CMD_READ : CMD_WRITE,drive,head,cylinder,sector,temp & 0xFF,control);
433
434 switch (xd_command(cmdblk,mode,(u_char *)(*real_buffer),(u_char *)(*real_buffer),sense,XD_TIMEOUT)) {
435 case 1:
436 printk("xd%c: %s timeout, recalibrating drive\n",'a'+drive,(operation == READ ? "read" : "write"));
437 xd_recalibrate(drive);
438 spin_lock_irq(&xd_lock);
439 return -EIO;
440 case 2:
441 if (sense[0] & 0x30) {
442 printk("xd%c: %s - ",'a'+drive,(operation == READ ? "reading" : "writing"));
443 switch ((sense[0] & 0x30) >> 4) {
444 case 0: printk("drive error, code = 0x%X",sense[0] & 0x0F);
445 break;
446 case 1: printk("controller error, code = 0x%X",sense[0] & 0x0F);
447 break;
448 case 2: printk("command error, code = 0x%X",sense[0] & 0x0F);
449 break;
450 case 3: printk("miscellaneous error, code = 0x%X",sense[0] & 0x0F);
451 break;
452 }
453 }
454 if (sense[0] & 0x80)
455 printk(" - CHS = %d/%d/%d\n",((sense[2] & 0xC0) << 2) | sense[3],sense[1] & 0x1F,sense[2] & 0x3F);
456 /* reported drive number = (sense[1] & 0xE0) >> 5 */
457 else
458 printk(" - no valid disk address\n");
459 spin_lock_irq(&xd_lock);
460 return -EIO;
461 }
462 if (xd_dma_buffer)
463 for (i=0; i < (temp * 0x200); i++)
464 buffer[i] = xd_dma_buffer[i];
465
466 count -= temp, buffer += temp * 0x200, block += temp;
467 }
468 spin_lock_irq(&xd_lock);
469 return 0;
470 }
471
472 /* xd_recalibrate: recalibrate a given drive and reset controller if necessary */
473 static void xd_recalibrate (u_char drive)
474 {
475 u_char cmdblk[6];
476
477 xd_build(cmdblk,CMD_RECALIBRATE,drive,0,0,0,0,0);
478 if (xd_command(cmdblk,PIO_MODE,NULL,NULL,NULL,XD_TIMEOUT * 8))
479 printk("xd%c: warning! error recalibrating, controller may be unstable\n", 'a'+drive);
480 }
481
482 /* xd_interrupt_handler: interrupt service routine */
483 static irqreturn_t xd_interrupt_handler(int irq, void *dev_id)
484 {
485 if (inb(XD_STATUS) & STAT_INTERRUPT) { /* check if it was our device */
486 #ifdef DEBUG_OTHER
487 printk("xd_interrupt_handler: interrupt detected\n");
488 #endif /* DEBUG_OTHER */
489 outb(0,XD_CONTROL); /* acknowledge interrupt */
490 wake_up(&xd_wait_int); /* and wake up sleeping processes */
491 return IRQ_HANDLED;
492 }
493 else
494 printk("xd: unexpected interrupt\n");
495 return IRQ_NONE;
496 }
497
498 /* xd_setup_dma: set up the DMA controller for a data transfer */
499 static u_char xd_setup_dma (u_char mode,u_char *buffer,u_int count)
500 {
501 unsigned long f;
502
503 if (nodma)
504 return (PIO_MODE);
505 if (((unsigned long) buffer & 0xFFFF0000) != (((unsigned long) buffer + count) & 0xFFFF0000)) {
506 #ifdef DEBUG_OTHER
507 printk("xd_setup_dma: using PIO, transfer overlaps 64k boundary\n");
508 #endif /* DEBUG_OTHER */
509 return (PIO_MODE);
510 }
511
512 f=claim_dma_lock();
513 disable_dma(xd_dma);
514 clear_dma_ff(xd_dma);
515 set_dma_mode(xd_dma,mode);
516 set_dma_addr(xd_dma, (unsigned long) buffer);
517 set_dma_count(xd_dma,count);
518
519 release_dma_lock(f);
520
521 return (DMA_MODE); /* use DMA and INT */
522 }
523
524 /* xd_build: put stuff into an array in a format suitable for the controller */
525 static u_char *xd_build (u_char *cmdblk,u_char command,u_char drive,u_char head,u_short cylinder,u_char sector,u_char count,u_char control)
526 {
527 cmdblk[0] = command;
528 cmdblk[1] = ((drive & 0x07) << 5) | (head & 0x1F);
529 cmdblk[2] = ((cylinder & 0x300) >> 2) | (sector & 0x3F);
530 cmdblk[3] = cylinder & 0xFF;
531 cmdblk[4] = count;
532 cmdblk[5] = control;
533
534 return (cmdblk);
535 }
536
537 static void xd_watchdog (unsigned long unused)
538 {
539 xd_error = 1;
540 wake_up(&xd_wait_int);
541 }
542
543 /* xd_waitport: waits until port & mask == flags or a timeout occurs. return 1 for a timeout */
544 static inline u_char xd_waitport (u_short port,u_char flags,u_char mask,u_long timeout)
545 {
546 u_long expiry = jiffies + timeout;
547 int success;
548
549 xdc_busy = 1;
550 while ((success = ((inb(port) & mask) != flags)) && time_before(jiffies, expiry))
551 schedule_timeout_uninterruptible(1);
552 xdc_busy = 0;
553 return (success);
554 }
555
556 static inline u_int xd_wait_for_IRQ (void)
557 {
558 unsigned long flags;
559 xd_watchdog_int.expires = jiffies + 8 * HZ;
560 add_timer(&xd_watchdog_int);
561
562 flags=claim_dma_lock();
563 enable_dma(xd_dma);
564 release_dma_lock(flags);
565
566 sleep_on(&xd_wait_int);
567 del_timer(&xd_watchdog_int);
568 xdc_busy = 0;
569
570 flags=claim_dma_lock();
571 disable_dma(xd_dma);
572 release_dma_lock(flags);
573
574 if (xd_error) {
575 printk("xd: missed IRQ - command aborted\n");
576 xd_error = 0;
577 return (1);
578 }
579 return (0);
580 }
581
582 /* xd_command: handle all data transfers necessary for a single command */
583 static u_int xd_command (u_char *command,u_char mode,u_char *indata,u_char *outdata,u_char *sense,u_long timeout)
584 {
585 u_char cmdblk[6],csb,complete = 0;
586
587 #ifdef DEBUG_COMMAND
588 printk("xd_command: command = 0x%X, mode = 0x%X, indata = 0x%X, outdata = 0x%X, sense = 0x%X\n",command,mode,indata,outdata,sense);
589 #endif /* DEBUG_COMMAND */
590
591 outb(0,XD_SELECT);
592 outb(mode,XD_CONTROL);
593
594 if (xd_waitport(XD_STATUS,STAT_SELECT,STAT_SELECT,timeout))
595 return (1);
596
597 while (!complete) {
598 if (xd_waitport(XD_STATUS,STAT_READY,STAT_READY,timeout))
599 return (1);
600
601 switch (inb(XD_STATUS) & (STAT_COMMAND | STAT_INPUT)) {
602 case 0:
603 if (mode == DMA_MODE) {
604 if (xd_wait_for_IRQ())
605 return (1);
606 } else
607 outb(outdata ? *outdata++ : 0,XD_DATA);
608 break;
609 case STAT_INPUT:
610 if (mode == DMA_MODE) {
611 if (xd_wait_for_IRQ())
612 return (1);
613 } else
614 if (indata)
615 *indata++ = inb(XD_DATA);
616 else
617 inb(XD_DATA);
618 break;
619 case STAT_COMMAND:
620 outb(command ? *command++ : 0,XD_DATA);
621 break;
622 case STAT_COMMAND | STAT_INPUT:
623 complete = 1;
624 break;
625 }
626 }
627 csb = inb(XD_DATA);
628
629 if (xd_waitport(XD_STATUS,0,STAT_SELECT,timeout)) /* wait until deselected */
630 return (1);
631
632 if (csb & CSB_ERROR) { /* read sense data if error */
633 xd_build(cmdblk,CMD_SENSE,(csb & CSB_LUN) >> 5,0,0,0,0,0);
634 if (xd_command(cmdblk,0,sense,NULL,NULL,XD_TIMEOUT))
635 printk("xd: warning! sense command failed!\n");
636 }
637
638 #ifdef DEBUG_COMMAND
639 printk("xd_command: completed with csb = 0x%X\n",csb);
640 #endif /* DEBUG_COMMAND */
641
642 return (csb & CSB_ERROR);
643 }
644
645 static u_char __init xd_initdrives (void (*init_drive)(u_char drive))
646 {
647 u_char cmdblk[6],i,count = 0;
648
649 for (i = 0; i < XD_MAXDRIVES; i++) {
650 xd_build(cmdblk,CMD_TESTREADY,i,0,0,0,0,0);
651 if (!xd_command(cmdblk,PIO_MODE,NULL,NULL,NULL,XD_TIMEOUT*8)) {
652 msleep_interruptible(XD_INIT_DISK_DELAY);
653
654 init_drive(count);
655 count++;
656
657 msleep_interruptible(XD_INIT_DISK_DELAY);
658 }
659 }
660 return (count);
661 }
662
663 static void __init xd_manual_geo_set (u_char drive)
664 {
665 xd_info[drive].heads = (u_char)(xd_geo[3 * drive + 1]);
666 xd_info[drive].cylinders = (u_short)(xd_geo[3 * drive]);
667 xd_info[drive].sectors = (u_char)(xd_geo[3 * drive + 2]);
668 }
669
670 static void __init xd_dtc_init_controller (unsigned int address)
671 {
672 switch (address) {
673 case 0x00000:
674 case 0xC8000: break; /*initial: 0x320 */
675 case 0xCA000: xd_iobase = 0x324;
676 case 0xD0000: /*5150CX*/
677 case 0xD8000: break; /*5150CX & 5150XL*/
678 default: printk("xd_dtc_init_controller: unsupported BIOS address %06x\n",address);
679 break;
680 }
681 xd_maxsectors = 0x01; /* my card seems to have trouble doing multi-block transfers? */
682
683 outb(0,XD_RESET); /* reset the controller */
684 }
685
686
687 static void __init xd_dtc5150cx_init_drive (u_char drive)
688 {
689 /* values from controller's BIOS - BIOS chip may be removed */
690 static u_short geometry_table[][4] = {
691 {0x200,8,0x200,0x100},
692 {0x267,2,0x267,0x267},
693 {0x264,4,0x264,0x80},
694 {0x132,4,0x132,0x0},
695 {0x132,2,0x80, 0x132},
696 {0x177,8,0x177,0x0},
697 {0x132,8,0x84, 0x0},
698 {}, /* not used */
699 {0x132,6,0x80, 0x100},
700 {0x200,6,0x100,0x100},
701 {0x264,2,0x264,0x80},
702 {0x280,4,0x280,0x100},
703 {0x2B9,3,0x2B9,0x2B9},
704 {0x2B9,5,0x2B9,0x2B9},
705 {0x280,6,0x280,0x100},
706 {0x132,4,0x132,0x0}};
707 u_char n;
708
709 n = inb(XD_JUMPER);
710 n = (drive ? n : (n >> 2)) & 0x33;
711 n = (n | (n >> 2)) & 0x0F;
712 if (xd_geo[3*drive])
713 xd_manual_geo_set(drive);
714 else
715 if (n != 7) {
716 xd_info[drive].heads = (u_char)(geometry_table[n][1]); /* heads */
717 xd_info[drive].cylinders = geometry_table[n][0]; /* cylinders */
718 xd_info[drive].sectors = 17; /* sectors */
719 #if 0
720 xd_info[drive].rwrite = geometry_table[n][2]; /* reduced write */
721 xd_info[drive].precomp = geometry_table[n][3] /* write precomp */
722 xd_info[drive].ecc = 0x0B; /* ecc length */
723 #endif /* 0 */
724 }
725 else {
726 printk("xd%c: undetermined drive geometry\n",'a'+drive);
727 return;
728 }
729 xd_info[drive].control = 5; /* control byte */
730 xd_setparam(CMD_DTCSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,geometry_table[n][2],geometry_table[n][3],0x0B);
731 xd_recalibrate(drive);
732 }
733
734 static void __init xd_dtc_init_drive (u_char drive)
735 {
736 u_char cmdblk[6],buf[64];
737
738 xd_build(cmdblk,CMD_DTCGETGEOM,drive,0,0,0,0,0);
739 if (!xd_command(cmdblk,PIO_MODE,buf,NULL,NULL,XD_TIMEOUT * 2)) {
740 xd_info[drive].heads = buf[0x0A]; /* heads */
741 xd_info[drive].cylinders = ((u_short *) (buf))[0x04]; /* cylinders */
742 xd_info[drive].sectors = 17; /* sectors */
743 if (xd_geo[3*drive])
744 xd_manual_geo_set(drive);
745 #if 0
746 xd_info[drive].rwrite = ((u_short *) (buf + 1))[0x05]; /* reduced write */
747 xd_info[drive].precomp = ((u_short *) (buf + 1))[0x06]; /* write precomp */
748 xd_info[drive].ecc = buf[0x0F]; /* ecc length */
749 #endif /* 0 */
750 xd_info[drive].control = 0; /* control byte */
751
752 xd_setparam(CMD_DTCSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,((u_short *) (buf + 1))[0x05],((u_short *) (buf + 1))[0x06],buf[0x0F]);
753 xd_build(cmdblk,CMD_DTCSETSTEP,drive,0,0,0,0,7);
754 if (xd_command(cmdblk,PIO_MODE,NULL,NULL,NULL,XD_TIMEOUT * 2))
755 printk("xd_dtc_init_drive: error setting step rate for xd%c\n", 'a'+drive);
756 }
757 else
758 printk("xd_dtc_init_drive: error reading geometry for xd%c\n", 'a'+drive);
759 }
760
761 static void __init xd_wd_init_controller (unsigned int address)
762 {
763 switch (address) {
764 case 0x00000:
765 case 0xC8000: break; /*initial: 0x320 */
766 case 0xCA000: xd_iobase = 0x324; break;
767 case 0xCC000: xd_iobase = 0x328; break;
768 case 0xCE000: xd_iobase = 0x32C; break;
769 case 0xD0000: xd_iobase = 0x328; break; /* ? */
770 case 0xD8000: xd_iobase = 0x32C; break; /* ? */
771 default: printk("xd_wd_init_controller: unsupported BIOS address %06x\n",address);
772 break;
773 }
774 xd_maxsectors = 0x01; /* this one doesn't wrap properly either... */
775
776 outb(0,XD_RESET); /* reset the controller */
777
778 msleep(XD_INIT_DISK_DELAY);
779 }
780
781 static void __init xd_wd_init_drive (u_char drive)
782 {
783 /* values from controller's BIOS - BIOS may be disabled */
784 static u_short geometry_table[][4] = {
785 {0x264,4,0x1C2,0x1C2}, /* common part */
786 {0x132,4,0x099,0x0},
787 {0x267,2,0x1C2,0x1C2},
788 {0x267,4,0x1C2,0x1C2},
789
790 {0x334,6,0x335,0x335}, /* 1004 series RLL */
791 {0x30E,4,0x30F,0x3DC},
792 {0x30E,2,0x30F,0x30F},
793 {0x267,4,0x268,0x268},
794
795 {0x3D5,5,0x3D6,0x3D6}, /* 1002 series RLL */
796 {0x3DB,7,0x3DC,0x3DC},
797 {0x264,4,0x265,0x265},
798 {0x267,4,0x268,0x268}};
799
800 u_char cmdblk[6],buf[0x200];
801 u_char n = 0,rll,jumper_state,use_jumper_geo;
802 u_char wd_1002 = (xd_sigs[xd_type].string[7] == '6');
803
804 jumper_state = ~(inb(0x322));
805 if (jumper_state & 0x40)
806 xd_irq = 9;
807 rll = (jumper_state & 0x30) ? (0x04 << wd_1002) : 0;
808 xd_build(cmdblk,CMD_READ,drive,0,0,0,1,0);
809 if (!xd_command(cmdblk,PIO_MODE,buf,NULL,NULL,XD_TIMEOUT * 2)) {
810 xd_info[drive].heads = buf[0x1AF]; /* heads */
811 xd_info[drive].cylinders = ((u_short *) (buf + 1))[0xD6]; /* cylinders */
812 xd_info[drive].sectors = 17; /* sectors */
813 if (xd_geo[3*drive])
814 xd_manual_geo_set(drive);
815 #if 0
816 xd_info[drive].rwrite = ((u_short *) (buf))[0xD8]; /* reduced write */
817 xd_info[drive].wprecomp = ((u_short *) (buf))[0xDA]; /* write precomp */
818 xd_info[drive].ecc = buf[0x1B4]; /* ecc length */
819 #endif /* 0 */
820 xd_info[drive].control = buf[0x1B5]; /* control byte */
821 use_jumper_geo = !(xd_info[drive].heads) || !(xd_info[drive].cylinders);
822 if (xd_geo[3*drive]) {
823 xd_manual_geo_set(drive);
824 xd_info[drive].control = rll ? 7 : 5;
825 }
826 else if (use_jumper_geo) {
827 n = (((jumper_state & 0x0F) >> (drive << 1)) & 0x03) | rll;
828 xd_info[drive].cylinders = geometry_table[n][0];
829 xd_info[drive].heads = (u_char)(geometry_table[n][1]);
830 xd_info[drive].control = rll ? 7 : 5;
831 #if 0
832 xd_info[drive].rwrite = geometry_table[n][2];
833 xd_info[drive].wprecomp = geometry_table[n][3];
834 xd_info[drive].ecc = 0x0B;
835 #endif /* 0 */
836 }
837 if (!wd_1002) {
838 if (use_jumper_geo)
839 xd_setparam(CMD_WDSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,
840 geometry_table[n][2],geometry_table[n][3],0x0B);
841 else
842 xd_setparam(CMD_WDSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,
843 ((u_short *) (buf))[0xD8],((u_short *) (buf))[0xDA],buf[0x1B4]);
844 }
845 /* 1002 based RLL controller requests converted addressing, but reports physical
846 (physical 26 sec., logical 17 sec.)
847 1004 based ???? */
848 if (rll & wd_1002) {
849 if ((xd_info[drive].cylinders *= 26,
850 xd_info[drive].cylinders /= 17) > 1023)
851 xd_info[drive].cylinders = 1023; /* 1024 ? */
852 #if 0
853 xd_info[drive].rwrite *= 26;
854 xd_info[drive].rwrite /= 17;
855 xd_info[drive].wprecomp *= 26
856 xd_info[drive].wprecomp /= 17;
857 #endif /* 0 */
858 }
859 }
860 else
861 printk("xd_wd_init_drive: error reading geometry for xd%c\n",'a'+drive);
862
863 }
864
865 static void __init xd_seagate_init_controller (unsigned int address)
866 {
867 switch (address) {
868 case 0x00000:
869 case 0xC8000: break; /*initial: 0x320 */
870 case 0xD0000: xd_iobase = 0x324; break;
871 case 0xD8000: xd_iobase = 0x328; break;
872 case 0xE0000: xd_iobase = 0x32C; break;
873 default: printk("xd_seagate_init_controller: unsupported BIOS address %06x\n",address);
874 break;
875 }
876 xd_maxsectors = 0x40;
877
878 outb(0,XD_RESET); /* reset the controller */
879 }
880
881 static void __init xd_seagate_init_drive (u_char drive)
882 {
883 u_char cmdblk[6],buf[0x200];
884
885 xd_build(cmdblk,CMD_ST11GETGEOM,drive,0,0,0,1,0);
886 if (!xd_command(cmdblk,PIO_MODE,buf,NULL,NULL,XD_TIMEOUT * 2)) {
887 xd_info[drive].heads = buf[0x04]; /* heads */
888 xd_info[drive].cylinders = (buf[0x02] << 8) | buf[0x03]; /* cylinders */
889 xd_info[drive].sectors = buf[0x05]; /* sectors */
890 xd_info[drive].control = 0; /* control byte */
891 }
892 else
893 printk("xd_seagate_init_drive: error reading geometry from xd%c\n", 'a'+drive);
894 }
895
896 /* Omti support courtesy Dirk Melchers */
897 static void __init xd_omti_init_controller (unsigned int address)
898 {
899 switch (address) {
900 case 0x00000:
901 case 0xC8000: break; /*initial: 0x320 */
902 case 0xD0000: xd_iobase = 0x324; break;
903 case 0xD8000: xd_iobase = 0x328; break;
904 case 0xE0000: xd_iobase = 0x32C; break;
905 default: printk("xd_omti_init_controller: unsupported BIOS address %06x\n",address);
906 break;
907 }
908
909 xd_maxsectors = 0x40;
910
911 outb(0,XD_RESET); /* reset the controller */
912 }
913
914 static void __init xd_omti_init_drive (u_char drive)
915 {
916 /* gets infos from drive */
917 xd_override_init_drive(drive);
918
919 /* set other parameters, Hardcoded, not that nice :-) */
920 xd_info[drive].control = 2;
921 }
922
923 /* Xebec support (AK) */
924 static void __init xd_xebec_init_controller (unsigned int address)
925 {
926 /* iobase may be set manually in range 0x300 - 0x33C
927 irq may be set manually to 2(9),3,4,5,6,7
928 dma may be set manually to 1,2,3
929 (How to detect them ???)
930 BIOS address may be set manually in range 0x0 - 0xF8000
931 If you need non-standard settings use the xd=... command */
932
933 switch (address) {
934 case 0x00000:
935 case 0xC8000: /* initially: xd_iobase==0x320 */
936 case 0xD0000:
937 case 0xD2000:
938 case 0xD4000:
939 case 0xD6000:
940 case 0xD8000:
941 case 0xDA000:
942 case 0xDC000:
943 case 0xDE000:
944 case 0xE0000: break;
945 default: printk("xd_xebec_init_controller: unsupported BIOS address %06x\n",address);
946 break;
947 }
948
949 xd_maxsectors = 0x01;
950 outb(0,XD_RESET); /* reset the controller */
951
952 msleep(XD_INIT_DISK_DELAY);
953 }
954
955 static void __init xd_xebec_init_drive (u_char drive)
956 {
957 /* values from controller's BIOS - BIOS chip may be removed */
958 static u_short geometry_table[][5] = {
959 {0x132,4,0x080,0x080,0x7},
960 {0x132,4,0x080,0x080,0x17},
961 {0x264,2,0x100,0x100,0x7},
962 {0x264,2,0x100,0x100,0x17},
963 {0x132,8,0x080,0x080,0x7},
964 {0x132,8,0x080,0x080,0x17},
965 {0x264,4,0x100,0x100,0x6},
966 {0x264,4,0x100,0x100,0x17},
967 {0x2BC,5,0x2BC,0x12C,0x6},
968 {0x3A5,4,0x3A5,0x3A5,0x7},
969 {0x26C,6,0x26C,0x26C,0x7},
970 {0x200,8,0x200,0x100,0x17},
971 {0x400,5,0x400,0x400,0x7},
972 {0x400,6,0x400,0x400,0x7},
973 {0x264,8,0x264,0x200,0x17},
974 {0x33E,7,0x33E,0x200,0x7}};
975 u_char n;
976
977 n = inb(XD_JUMPER) & 0x0F; /* BIOS's drive number: same geometry
978 is assumed for BOTH drives */
979 if (xd_geo[3*drive])
980 xd_manual_geo_set(drive);
981 else {
982 xd_info[drive].heads = (u_char)(geometry_table[n][1]); /* heads */
983 xd_info[drive].cylinders = geometry_table[n][0]; /* cylinders */
984 xd_info[drive].sectors = 17; /* sectors */
985 #if 0
986 xd_info[drive].rwrite = geometry_table[n][2]; /* reduced write */
987 xd_info[drive].precomp = geometry_table[n][3] /* write precomp */
988 xd_info[drive].ecc = 0x0B; /* ecc length */
989 #endif /* 0 */
990 }
991 xd_info[drive].control = geometry_table[n][4]; /* control byte */
992 xd_setparam(CMD_XBSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,geometry_table[n][2],geometry_table[n][3],0x0B);
993 xd_recalibrate(drive);
994 }
995
996 /* xd_override_init_drive: this finds disk geometry in a "binary search" style, narrowing in on the "correct" number of heads
997 etc. by trying values until it gets the highest successful value. Idea courtesy Salvador Abreu (spa@fct.unl.pt). */
998 static void __init xd_override_init_drive (u_char drive)
999 {
1000 u_short min[] = { 0,0,0 },max[] = { 16,1024,64 },test[] = { 0,0,0 };
1001 u_char cmdblk[6],i;
1002
1003 if (xd_geo[3*drive])
1004 xd_manual_geo_set(drive);
1005 else {
1006 for (i = 0; i < 3; i++) {
1007 while (min[i] != max[i] - 1) {
1008 test[i] = (min[i] + max[i]) / 2;
1009 xd_build(cmdblk,CMD_SEEK,drive,(u_char) test[0],(u_short) test[1],(u_char) test[2],0,0);
1010 if (!xd_command(cmdblk,PIO_MODE,NULL,NULL,NULL,XD_TIMEOUT * 2))
1011 min[i] = test[i];
1012 else
1013 max[i] = test[i];
1014 }
1015 test[i] = min[i];
1016 }
1017 xd_info[drive].heads = (u_char) min[0] + 1;
1018 xd_info[drive].cylinders = (u_short) min[1] + 1;
1019 xd_info[drive].sectors = (u_char) min[2] + 1;
1020 }
1021 xd_info[drive].control = 0;
1022 }
1023
1024 /* xd_setup: initialise controller from command line parameters */
1025 static void __init do_xd_setup (int *integers)
1026 {
1027 switch (integers[0]) {
1028 case 4: if (integers[4] < 0)
1029 nodma = 1;
1030 else if (integers[4] < 8)
1031 xd_dma = integers[4];
1032 case 3: if ((integers[3] > 0) && (integers[3] <= 0x3FC))
1033 xd_iobase = integers[3];
1034 case 2: if ((integers[2] > 0) && (integers[2] < 16))
1035 xd_irq = integers[2];
1036 case 1: xd_override = 1;
1037 if ((integers[1] >= 0) && (integers[1] < ARRAY_SIZE(xd_sigs)))
1038 xd_type = integers[1];
1039 case 0: break;
1040 default:printk("xd: too many parameters for xd\n");
1041 }
1042 xd_maxsectors = 0x01;
1043 }
1044
1045 /* xd_setparam: set the drive characteristics */
1046 static void __init xd_setparam (u_char command,u_char drive,u_char heads,u_short cylinders,u_short rwrite,u_short wprecomp,u_char ecc)
1047 {
1048 u_char cmdblk[14];
1049
1050 xd_build(cmdblk,command,drive,0,0,0,0,0);
1051 cmdblk[6] = (u_char) (cylinders >> 8) & 0x03;
1052 cmdblk[7] = (u_char) (cylinders & 0xFF);
1053 cmdblk[8] = heads & 0x1F;
1054 cmdblk[9] = (u_char) (rwrite >> 8) & 0x03;
1055 cmdblk[10] = (u_char) (rwrite & 0xFF);
1056 cmdblk[11] = (u_char) (wprecomp >> 8) & 0x03;
1057 cmdblk[12] = (u_char) (wprecomp & 0xFF);
1058 cmdblk[13] = ecc;
1059
1060 /* Some controllers require geometry info as data, not command */
1061
1062 if (xd_command(cmdblk,PIO_MODE,NULL,&cmdblk[6],NULL,XD_TIMEOUT * 2))
1063 printk("xd: error setting characteristics for xd%c\n", 'a'+drive);
1064 }
1065
1066
1067 #ifdef MODULE
1068
1069 module_param_array(xd, int, NULL, 0);
1070 module_param_array(xd_geo, int, NULL, 0);
1071 module_param(nodma, bool, 0);
1072
1073 MODULE_LICENSE("GPL");
1074
1075 void cleanup_module(void)
1076 {
1077 int i;
1078 unregister_blkdev(XT_DISK_MAJOR, "xd");
1079 for (i = 0; i < xd_drives; i++) {
1080 del_gendisk(xd_gendisk[i]);
1081 put_disk(xd_gendisk[i]);
1082 }
1083 blk_cleanup_queue(xd_queue);
1084 release_region(xd_iobase,4);
1085 if (xd_drives) {
1086 free_irq(xd_irq, NULL);
1087 free_dma(xd_dma);
1088 if (xd_dma_buffer)
1089 xd_dma_mem_free((unsigned long)xd_dma_buffer, xd_maxsectors * 0x200);
1090 }
1091 }
1092 #else
1093
1094 static int __init xd_setup (char *str)
1095 {
1096 int ints[5];
1097 get_options (str, ARRAY_SIZE (ints), ints);
1098 do_xd_setup (ints);
1099 return 1;
1100 }
1101
1102 /* xd_manual_geo_init: initialise drive geometry from command line parameters
1103 (used only for WD drives) */
1104 static int __init xd_manual_geo_init (char *str)
1105 {
1106 int i, integers[1 + 3*XD_MAXDRIVES];
1107
1108 get_options (str, ARRAY_SIZE (integers), integers);
1109 if (integers[0]%3 != 0) {
1110 printk("xd: incorrect number of parameters for xd_geo\n");
1111 return 1;
1112 }
1113 for (i = 0; (i < integers[0]) && (i < 3*XD_MAXDRIVES); i++)
1114 xd_geo[i] = integers[i+1];
1115 return 1;
1116 }
1117
1118 __setup ("xd=", xd_setup);
1119 __setup ("xd_geo=", xd_manual_geo_init);
1120
1121 #endif /* MODULE */
1122
1123 module_init(xd_init);
1124 MODULE_ALIAS_BLOCKDEV_MAJOR(XT_DISK_MAJOR);
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree