ide: fix race in device_create
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / pcmcia / pxa2xx_cm_x270.c
blobe7ab060ff118db5f13a80f276df59dc555826ca6
1 /*
2 * linux/drivers/pcmcia/pxa/pxa_cm_x270.c
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
8 * Compulab Ltd., 2003, 2007
9 * Mike Rapoport <mike@compulab.co.il>
13 #include <linux/kernel.h>
14 #include <linux/sched.h>
15 #include <linux/platform_device.h>
16 #include <linux/irq.h>
17 #include <linux/delay.h>
19 #include <pcmcia/ss.h>
20 #include <asm/hardware.h>
22 #include <asm/arch/pxa-regs.h>
23 #include <asm/arch/pxa2xx-gpio.h>
24 #include <asm/arch/cm-x270.h>
26 #include "soc_common.h"
28 static struct pcmcia_irqs irqs[] = {
29 { 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
30 { 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
33 static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
35 GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
36 GPIO_bit(GPIO49_nPWE) |
37 GPIO_bit(GPIO50_nPIOR) |
38 GPIO_bit(GPIO51_nPIOW) |
39 GPIO_bit(GPIO85_nPCE_1) |
40 GPIO_bit(GPIO54_nPCE_2);
42 pxa_gpio_mode(GPIO48_nPOE_MD);
43 pxa_gpio_mode(GPIO49_nPWE_MD);
44 pxa_gpio_mode(GPIO50_nPIOR_MD);
45 pxa_gpio_mode(GPIO51_nPIOW_MD);
46 pxa_gpio_mode(GPIO85_nPCE_1_MD);
47 pxa_gpio_mode(GPIO54_nPCE_2_MD);
48 pxa_gpio_mode(GPIO55_nPREG_MD);
49 pxa_gpio_mode(GPIO56_nPWAIT_MD);
50 pxa_gpio_mode(GPIO57_nIOIS16_MD);
52 /* Reset signal */
53 pxa_gpio_mode(GPIO53_nPCE_2 | GPIO_OUT);
54 GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
56 set_irq_type(PCMCIA_S0_CD_VALID, IRQ_TYPE_EDGE_BOTH);
57 set_irq_type(PCMCIA_S1_CD_VALID, IRQ_TYPE_EDGE_BOTH);
59 /* irq's for slots: */
60 set_irq_type(PCMCIA_S0_RDYINT, IRQ_TYPE_EDGE_FALLING);
61 set_irq_type(PCMCIA_S1_RDYINT, IRQ_TYPE_EDGE_FALLING);
63 skt->irq = (skt->nr == 0) ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
64 return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
67 static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
69 soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
71 set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID), IRQ_TYPE_NONE);
72 set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID), IRQ_TYPE_NONE);
74 set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_RDYINT), IRQ_TYPE_NONE);
75 set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_RDYINT), IRQ_TYPE_NONE);
79 static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
80 struct pcmcia_state *state)
82 state->detect = (PCC_DETECT(skt->nr) == 0) ? 1 : 0;
83 state->ready = (PCC_READY(skt->nr) == 0) ? 0 : 1;
84 state->bvd1 = 1;
85 state->bvd2 = 1;
86 state->vs_3v = 0;
87 state->vs_Xv = 0;
88 state->wrprot = 0; /* not available */
92 static int cmx270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
93 const socket_state_t *state)
95 GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
96 pxa_gpio_mode(GPIO49_nPWE | GPIO_OUT);
98 switch (skt->nr) {
99 case 0:
100 if (state->flags & SS_RESET) {
101 GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
102 GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
103 udelay(10);
104 GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
105 GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
107 break;
108 case 1:
109 if (state->flags & SS_RESET) {
110 GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
111 GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
112 udelay(10);
113 GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
114 GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
116 break;
119 pxa_gpio_mode(GPIO49_nPWE_MD);
121 return 0;
124 static void cmx270_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
128 static void cmx270_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
133 static struct pcmcia_low_level cmx270_pcmcia_ops = {
134 .owner = THIS_MODULE,
135 .hw_init = cmx270_pcmcia_hw_init,
136 .hw_shutdown = cmx270_pcmcia_shutdown,
137 .socket_state = cmx270_pcmcia_socket_state,
138 .configure_socket = cmx270_pcmcia_configure_socket,
139 .socket_init = cmx270_pcmcia_socket_init,
140 .socket_suspend = cmx270_pcmcia_socket_suspend,
141 .nr = 2,
144 static struct platform_device *cmx270_pcmcia_device;
146 static int __init cmx270_pcmcia_init(void)
148 int ret;
150 cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
152 if (!cmx270_pcmcia_device)
153 return -ENOMEM;
155 cmx270_pcmcia_device->dev.platform_data = &cmx270_pcmcia_ops;
157 printk(KERN_INFO "Registering cm-x270 PCMCIA interface.\n");
158 ret = platform_device_add(cmx270_pcmcia_device);
160 if (ret)
161 platform_device_put(cmx270_pcmcia_device);
163 return ret;
166 static void __exit cmx270_pcmcia_exit(void)
168 platform_device_unregister(cmx270_pcmcia_device);
171 module_init(cmx270_pcmcia_init);
172 module_exit(cmx270_pcmcia_exit);
174 MODULE_LICENSE("GPL");
175 MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
176 MODULE_DESCRIPTION("CM-x270 PCMCIA driver");