include/asm-arm/plat-s3c/uncompress.h

   1 /* linux/include/asm-arm/plat-s3c/uncompress.h
   2  *
   3  * Copyright 2003, 2007 Simtec Electronics
   4  *      http://armlinux.simtec.co.uk/
   5  *      Ben Dooks <ben@simtec.co.uk>
   6  *
   7  * S3C - uncompress code
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12 */
  13
  14 #ifndef __ASM_PLAT_UNCOMPRESS_H
  15 #define __ASM_PLAT_UNCOMPRESS_H
  16
  17 typedef unsigned int upf_t;     /* cannot include linux/serial_core.h */
  18
  19 /* uart setup */
  20
  21 static unsigned int fifo_mask;
  22 static unsigned int fifo_max;
  23
  24 /* forward declerations */
  25
  26 static void arch_detect_cpu(void);
  27
  28 /* defines for UART registers */
  29
  30 #include <asm/plat-s3c/regs-serial.h>
  31 #include <asm/plat-s3c/regs-watchdog.h>
  32
  33 /* working in physical space... */
  34 #undef S3C2410_WDOGREG
  35 #define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
  36
  37 /* how many bytes we allow into the FIFO at a time in FIFO mode */
  38 #define FIFO_MAX         (14)
  39
  40 #define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT)
  41
  42 static __inline__ void
  43 uart_wr(unsigned int reg, unsigned int val)
  44 {
  45         volatile unsigned int *ptr;
  46
  47         ptr = (volatile unsigned int *)(reg + uart_base);
  48         *ptr = val;
  49 }
  50
  51 static __inline__ unsigned int
  52 uart_rd(unsigned int reg)
  53 {
  54         volatile unsigned int *ptr;
  55
  56         ptr = (volatile unsigned int *)(reg + uart_base);
  57         return *ptr;
  58 }
  59
  60 /* we can deal with the case the UARTs are being run
  61  * in FIFO mode, so that we don't hold up our execution
  62  * waiting for tx to happen...
  63 */
  64
  65 static void putc(int ch)
  66 {
  67         if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
  68                 int level;
  69
  70                 while (1) {
  71                         level = uart_rd(S3C2410_UFSTAT);
  72                         level &= fifo_mask;
  73
  74                         if (level < fifo_max)
  75                                 break;
  76                 }
  77
  78         } else {
  79                 /* not using fifos */
  80
  81                 while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
  82                         barrier();
  83         }
  84
  85         /* write byte to transmission register */
  86         uart_wr(S3C2410_UTXH, ch);
  87 }
  88
  89 static inline void flush(void)
  90 {
  91 }
  92
  93 #define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
  94
  95 /* CONFIG_S3C_BOOT_WATCHDOG
  96  *
  97  * Simple boot-time watchdog setup, to reboot the system if there is
  98  * any problem with the boot process
  99 */
 100
 101 #ifdef CONFIG_S3C_BOOT_WATCHDOG
 102
 103 #define WDOG_COUNT (0xff00)
 104
 105 static inline void arch_decomp_wdog(void)
 106 {
 107         __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
 108 }
 109
 110 static void arch_decomp_wdog_start(void)
 111 {
 112         __raw_writel(WDOG_COUNT, S3C2410_WTDAT);
 113         __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
 114         __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
 115 }
 116
 117 #else
 118 #define arch_decomp_wdog_start()
 119 #define arch_decomp_wdog()
 120 #endif
 121
 122 #ifdef CONFIG_S3C_BOOT_ERROR_RESET
 123
 124 static void arch_decomp_error(const char *x)
 125 {
 126         putstr("\n\n");
 127         putstr(x);
 128         putstr("\n\n -- System resetting\n");
 129
 130         __raw_writel(0x4000, S3C2410_WTDAT);
 131         __raw_writel(0x4000, S3C2410_WTCNT);
 132         __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
 133
 134         while(1);
 135 }
 136
 137 #define arch_error arch_decomp_error
 138 #endif
 139
 140 static void error(char *err);
 141
 142 static void
 143 arch_decomp_setup(void)
 144 {
 145         /* we may need to setup the uart(s) here if we are not running
 146          * on an BAST... the BAST will have left the uarts configured
 147          * after calling linux.
 148          */
 149
 150         arch_detect_cpu();
 151         arch_decomp_wdog_start();
 152 }
 153
 154
 155 #endif /* __ASM_PLAT_UNCOMPRESS_H */