1 /* Various workarounds for chipset bugs.
2 This code runs very early and can't use the regular PCI subsystem
3 The entries are keyed to PCI bridges which usually identify chipsets
5 This is only for whole classes of chipsets with specific problems which
6 need early invasive action (e.g. before the timers are initialized).
7 Most PCI device specific workarounds can be done later and should be
9 Mainboard specific bugs should be handled by DMI entries.
10 CPU specific bugs in setup.c */
12 #include <linux/pci.h>
13 #include <linux/acpi.h>
14 #include <linux/pci_ids.h>
15 #include <asm/pci-direct.h>
17 #include <asm/io_apic.h>
19 #include <asm/iommu.h>
21 static void __init
fix_hypertransport_config(int num
, int slot
, int func
)
25 * we found a hypertransport bus
26 * make sure that we are broadcasting
27 * interrupts to all cpus on the ht bus
28 * if we're using extended apic ids
30 htcfg
= read_pci_config(num
, slot
, func
, 0x68);
31 if (htcfg
& (1 << 18)) {
32 printk(KERN_INFO
"Detected use of extended apic ids "
33 "on hypertransport bus\n");
34 if ((htcfg
& (1 << 17)) == 0) {
35 printk(KERN_INFO
"Enabling hypertransport extended "
36 "apic interrupt broadcast\n");
37 printk(KERN_INFO
"Note this is a bios bug, "
38 "please contact your hw vendor\n");
40 write_pci_config(num
, slot
, func
, 0x68, htcfg
);
47 static void __init
via_bugs(int num
, int slot
, int func
)
49 #ifdef CONFIG_GART_IOMMU
50 if ((max_pfn
> MAX_DMA32_PFN
|| force_iommu
) &&
51 !gart_iommu_aperture_allowed
) {
53 "Looks like a VIA chipset. Disabling IOMMU."
54 " Override with iommu=allowed\n");
55 gart_iommu_aperture_disabled
= 1;
61 #ifdef CONFIG_X86_IO_APIC
63 static int __init
nvidia_hpet_check(struct acpi_table_header
*header
)
67 #endif /* CONFIG_X86_IO_APIC */
68 #endif /* CONFIG_ACPI */
70 static void __init
nvidia_bugs(int num
, int slot
, int func
)
73 #ifdef CONFIG_X86_IO_APIC
75 * All timer overrides on Nvidia are
76 * wrong unless HPET is enabled.
77 * Unfortunately that's not true on many Asus boards.
78 * We don't know yet how to detect this automatically, but
79 * at least allow a command line override.
81 if (acpi_use_timer_override
)
84 if (acpi_table_parse(ACPI_SIG_HPET
, nvidia_hpet_check
)) {
85 acpi_skip_timer_override
= 1;
86 printk(KERN_INFO
"Nvidia board "
87 "detected. Ignoring ACPI "
89 printk(KERN_INFO
"If you got timer trouble "
90 "try acpi_use_timer_override\n");
94 /* RED-PEN skip them on mptables too? */
98 #define QFLAG_APPLY_ONCE 0x1
99 #define QFLAG_APPLIED 0x2
100 #define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
107 void (*f
)(int num
, int slot
, int func
);
110 static struct chipset early_qrk
[] __initdata
= {
111 { PCI_VENDOR_ID_NVIDIA
, PCI_ANY_ID
,
112 PCI_CLASS_BRIDGE_PCI
, PCI_ANY_ID
, QFLAG_APPLY_ONCE
, nvidia_bugs
},
113 { PCI_VENDOR_ID_VIA
, PCI_ANY_ID
,
114 PCI_CLASS_BRIDGE_PCI
, PCI_ANY_ID
, QFLAG_APPLY_ONCE
, via_bugs
},
115 { PCI_VENDOR_ID_AMD
, PCI_DEVICE_ID_AMD_K8_NB
,
116 PCI_CLASS_BRIDGE_HOST
, PCI_ANY_ID
, 0, fix_hypertransport_config
},
121 * check_dev_quirk - apply early quirks to a given PCI device
124 * @func: PCI function
126 * Check the vendor & device ID against the early quirks table.
128 * If the device is single function, let early_quirks() know so we don't
129 * poke at this device again.
131 static int __init
check_dev_quirk(int num
, int slot
, int func
)
139 class = read_pci_config_16(num
, slot
, func
, PCI_CLASS_DEVICE
);
142 return -1; /* no class, treat as single function */
144 vendor
= read_pci_config_16(num
, slot
, func
, PCI_VENDOR_ID
);
146 device
= read_pci_config_16(num
, slot
, func
, PCI_DEVICE_ID
);
148 for (i
= 0; early_qrk
[i
].f
!= NULL
; i
++) {
149 if (((early_qrk
[i
].vendor
== PCI_ANY_ID
) ||
150 (early_qrk
[i
].vendor
== vendor
)) &&
151 ((early_qrk
[i
].device
== PCI_ANY_ID
) ||
152 (early_qrk
[i
].device
== device
)) &&
153 (!((early_qrk
[i
].class ^ class) &
154 early_qrk
[i
].class_mask
))) {
155 if ((early_qrk
[i
].flags
&
156 QFLAG_DONE
) != QFLAG_DONE
)
157 early_qrk
[i
].f(num
, slot
, func
);
158 early_qrk
[i
].flags
|= QFLAG_APPLIED
;
162 type
= read_pci_config_byte(num
, slot
, func
,
170 void __init
early_quirks(void)
174 if (!early_pci_allowed())
177 /* Poor man's PCI discovery */
178 for (num
= 0; num
< 32; num
++)
179 for (slot
= 0; slot
< 32; slot
++)
180 for (func
= 0; func
< 8; func
++) {
181 /* Only probe function 0 on single fn devices */
182 if (check_dev_quirk(num
, slot
, func
))