serial: core, remove uart_update_termios
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / pci / hotplug / pcihp_slot.c
blob80b461c985579da3905744c36aabfd215c9cac06
1 /*
2 * Copyright (C) 1995,2001 Compaq Computer Corporation
3 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
4 * Copyright (C) 2001 IBM Corp.
5 * Copyright (C) 2003-2004 Intel Corporation
6 * (c) Copyright 2009 Hewlett-Packard Development Company, L.P.
8 * All rights reserved.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or (at
13 * your option) any later version.
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
18 * NON INFRINGEMENT. See the GNU General Public License for more
19 * details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 #include <linux/pci.h>
27 #include <linux/pci_hotplug.h>
29 static struct hpp_type0 pci_default_type0 = {
30 .revision = 1,
31 .cache_line_size = 8,
32 .latency_timer = 0x40,
33 .enable_serr = 0,
34 .enable_perr = 0,
37 static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
39 u16 pci_cmd, pci_bctl;
41 if (!hpp) {
43 * Perhaps we *should* use default settings for PCIe, but
44 * pciehp didn't, so we won't either.
46 if (pci_is_pcie(dev))
47 return;
48 dev_info(&dev->dev, "using default PCI settings\n");
49 hpp = &pci_default_type0;
52 if (hpp->revision > 1) {
53 dev_warn(&dev->dev,
54 "PCI settings rev %d not supported; using defaults\n",
55 hpp->revision);
56 hpp = &pci_default_type0;
59 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size);
60 pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer);
61 pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
62 if (hpp->enable_serr)
63 pci_cmd |= PCI_COMMAND_SERR;
64 else
65 pci_cmd &= ~PCI_COMMAND_SERR;
66 if (hpp->enable_perr)
67 pci_cmd |= PCI_COMMAND_PARITY;
68 else
69 pci_cmd &= ~PCI_COMMAND_PARITY;
70 pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
72 /* Program bridge control value */
73 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
74 pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
75 hpp->latency_timer);
76 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
77 if (hpp->enable_serr)
78 pci_bctl |= PCI_BRIDGE_CTL_SERR;
79 else
80 pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
81 if (hpp->enable_perr)
82 pci_bctl |= PCI_BRIDGE_CTL_PARITY;
83 else
84 pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
85 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
89 static void program_hpp_type1(struct pci_dev *dev, struct hpp_type1 *hpp)
91 if (hpp)
92 dev_warn(&dev->dev, "PCI-X settings not supported\n");
95 static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
97 int pos;
98 u16 reg16;
99 u32 reg32;
101 if (!hpp)
102 return;
104 /* Find PCI Express capability */
105 pos = pci_pcie_cap(dev);
106 if (!pos)
107 return;
109 if (hpp->revision > 1) {
110 dev_warn(&dev->dev, "PCIe settings rev %d not supported\n",
111 hpp->revision);
112 return;
115 /* Initialize Device Control Register */
116 pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &reg16);
117 reg16 = (reg16 & hpp->pci_exp_devctl_and) | hpp->pci_exp_devctl_or;
118 pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, reg16);
120 /* Initialize Link Control Register */
121 if (dev->subordinate) {
122 pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &reg16);
123 reg16 = (reg16 & hpp->pci_exp_lnkctl_and)
124 | hpp->pci_exp_lnkctl_or;
125 pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, reg16);
128 /* Find Advanced Error Reporting Enhanced Capability */
129 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
130 if (!pos)
131 return;
133 /* Initialize Uncorrectable Error Mask Register */
134 pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &reg32);
135 reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or;
136 pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32);
138 /* Initialize Uncorrectable Error Severity Register */
139 pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &reg32);
140 reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or;
141 pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32);
143 /* Initialize Correctable Error Mask Register */
144 pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, &reg32);
145 reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or;
146 pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32);
148 /* Initialize Advanced Error Capabilities and Control Register */
149 pci_read_config_dword(dev, pos + PCI_ERR_CAP, &reg32);
150 reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or;
151 pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
154 * FIXME: The following two registers are not supported yet.
156 * o Secondary Uncorrectable Error Severity Register
157 * o Secondary Uncorrectable Error Mask Register
161 void pci_configure_slot(struct pci_dev *dev)
163 struct pci_dev *cdev;
164 struct hotplug_params hpp;
165 int ret;
167 if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
168 (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
169 (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
170 return;
172 memset(&hpp, 0, sizeof(hpp));
173 ret = pci_get_hp_params(dev, &hpp);
174 if (ret)
175 dev_warn(&dev->dev, "no hotplug settings from platform\n");
177 program_hpp_type2(dev, hpp.t2);
178 program_hpp_type1(dev, hpp.t1);
179 program_hpp_type0(dev, hpp.t0);
181 if (dev->subordinate) {
182 list_for_each_entry(cdev, &dev->subordinate->devices,
183 bus_list)
184 pci_configure_slot(cdev);
187 EXPORT_SYMBOL_GPL(pci_configure_slot);