2 * Copyright (c) 2008 Atheros Communications Inc.
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 /* mac80211 and PCI callbacks */
19 #include <linux/nl80211.h>
22 #define ATH_PCI_VERSION "0.1"
24 #define IEEE80211_HTCAP_MAXRXAMPDU_FACTOR 13
26 static char *dev_info
= "ath9k";
28 MODULE_AUTHOR("Atheros Communications");
29 MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
30 MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
31 MODULE_LICENSE("Dual BSD/GPL");
33 static struct pci_device_id ath_pci_id_table
[] __devinitdata
= {
34 { PCI_VDEVICE(ATHEROS
, 0x0023) }, /* PCI */
35 { PCI_VDEVICE(ATHEROS
, 0x0024) }, /* PCI-E */
36 { PCI_VDEVICE(ATHEROS
, 0x0027) }, /* PCI */
37 { PCI_VDEVICE(ATHEROS
, 0x0029) }, /* PCI */
38 { PCI_VDEVICE(ATHEROS
, 0x002A) }, /* PCI-E */
42 static int ath_get_channel(struct ath_softc
*sc
,
43 struct ieee80211_channel
*chan
)
47 for (i
= 0; i
< sc
->sc_ah
->ah_nchan
; i
++) {
48 if (sc
->sc_ah
->ah_channels
[i
].channel
== chan
->center_freq
)
55 static u32
ath_get_extchanmode(struct ath_softc
*sc
,
56 struct ieee80211_channel
*chan
)
59 u8 ext_chan_offset
= sc
->sc_ht_info
.ext_chan_offset
;
60 enum ath9k_ht_macmode tx_chan_width
= sc
->sc_ht_info
.tx_chan_width
;
63 case IEEE80211_BAND_2GHZ
:
64 if ((ext_chan_offset
== IEEE80211_HT_IE_CHA_SEC_NONE
) &&
65 (tx_chan_width
== ATH9K_HT_MACMODE_20
))
66 chanmode
= CHANNEL_G_HT20
;
67 if ((ext_chan_offset
== IEEE80211_HT_IE_CHA_SEC_ABOVE
) &&
68 (tx_chan_width
== ATH9K_HT_MACMODE_2040
))
69 chanmode
= CHANNEL_G_HT40PLUS
;
70 if ((ext_chan_offset
== IEEE80211_HT_IE_CHA_SEC_BELOW
) &&
71 (tx_chan_width
== ATH9K_HT_MACMODE_2040
))
72 chanmode
= CHANNEL_G_HT40MINUS
;
74 case IEEE80211_BAND_5GHZ
:
75 if ((ext_chan_offset
== IEEE80211_HT_IE_CHA_SEC_NONE
) &&
76 (tx_chan_width
== ATH9K_HT_MACMODE_20
))
77 chanmode
= CHANNEL_A_HT20
;
78 if ((ext_chan_offset
== IEEE80211_HT_IE_CHA_SEC_ABOVE
) &&
79 (tx_chan_width
== ATH9K_HT_MACMODE_2040
))
80 chanmode
= CHANNEL_A_HT40PLUS
;
81 if ((ext_chan_offset
== IEEE80211_HT_IE_CHA_SEC_BELOW
) &&
82 (tx_chan_width
== ATH9K_HT_MACMODE_2040
))
83 chanmode
= CHANNEL_A_HT40MINUS
;
93 static int ath_setkey_tkip(struct ath_softc
*sc
,
94 struct ieee80211_key_conf
*key
,
95 struct ath9k_keyval
*hk
,
101 key_txmic
= key
->key
+ NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY
;
102 key_rxmic
= key
->key
+ NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY
;
105 /* Group key installation */
106 memcpy(hk
->kv_mic
, key_rxmic
, sizeof(hk
->kv_mic
));
107 return ath_keyset(sc
, key
->keyidx
, hk
, addr
);
109 if (!sc
->sc_splitmic
) {
111 * data key goes at first index,
112 * the hal handles the MIC keys at index+64.
114 memcpy(hk
->kv_mic
, key_rxmic
, sizeof(hk
->kv_mic
));
115 memcpy(hk
->kv_txmic
, key_txmic
, sizeof(hk
->kv_txmic
));
116 return ath_keyset(sc
, key
->keyidx
, hk
, addr
);
119 * TX key goes at first index, RX key at +32.
120 * The hal handles the MIC keys at index+64.
122 memcpy(hk
->kv_mic
, key_txmic
, sizeof(hk
->kv_mic
));
123 if (!ath_keyset(sc
, key
->keyidx
, hk
, NULL
)) {
124 /* Txmic entry failed. No need to proceed further */
125 DPRINTF(sc
, ATH_DBG_KEYCACHE
,
126 "%s Setting TX MIC Key Failed\n", __func__
);
130 memcpy(hk
->kv_mic
, key_rxmic
, sizeof(hk
->kv_mic
));
131 /* XXX delete tx key on failure? */
132 return ath_keyset(sc
, key
->keyidx
+32, hk
, addr
);
135 static int ath_key_config(struct ath_softc
*sc
,
137 struct ieee80211_key_conf
*key
)
139 struct ieee80211_vif
*vif
;
140 struct ath9k_keyval hk
;
141 const u8
*mac
= NULL
;
143 enum nl80211_iftype opmode
;
145 memset(&hk
, 0, sizeof(hk
));
149 hk
.kv_type
= ATH9K_CIPHER_WEP
;
152 hk
.kv_type
= ATH9K_CIPHER_TKIP
;
155 hk
.kv_type
= ATH9K_CIPHER_AES_CCM
;
161 hk
.kv_len
= key
->keylen
;
162 memcpy(hk
.kv_val
, key
->key
, key
->keylen
);
167 vif
= sc
->sc_vaps
[0]->av_if_data
;
172 * For _M_STA mc tx, we will not setup a key at all since we never
174 * _M_STA mc rx, we will use the keyID.
175 * for _M_IBSS mc tx, we will use the keyID, and no macaddr.
176 * for _M_IBSS mc rx, we will alloc a slot and plumb the mac of the
177 * peer node. BUT we will plumb a cleartext key so that we can do
178 * perSta default key table lookup in software.
180 if (is_broadcast_ether_addr(addr
)) {
182 case NL80211_IFTYPE_STATION
:
183 /* default key: could be group WPA key
184 * or could be static WEP key */
187 case NL80211_IFTYPE_ADHOC
:
189 case NL80211_IFTYPE_AP
:
199 if (key
->alg
== ALG_TKIP
)
200 ret
= ath_setkey_tkip(sc
, key
, &hk
, mac
);
202 ret
= ath_keyset(sc
, key
->keyidx
, &hk
, mac
);
210 static void ath_key_delete(struct ath_softc
*sc
, struct ieee80211_key_conf
*key
)
214 freeslot
= (key
->keyidx
>= 4) ? 1 : 0;
215 ath_key_reset(sc
, key
->keyidx
, freeslot
);
218 static void setup_ht_cap(struct ieee80211_ht_info
*ht_info
)
220 #define ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */
221 #define ATH9K_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */
223 ht_info
->ht_supported
= 1;
224 ht_info
->cap
= (u16
)IEEE80211_HT_CAP_SUP_WIDTH
225 |(u16
)IEEE80211_HT_CAP_SM_PS
226 |(u16
)IEEE80211_HT_CAP_SGI_40
227 |(u16
)IEEE80211_HT_CAP_DSSSCCK40
;
229 ht_info
->ampdu_factor
= ATH9K_HT_CAP_MAXRXAMPDU_65536
;
230 ht_info
->ampdu_density
= ATH9K_HT_CAP_MPDUDENSITY_8
;
231 /* setup supported mcs set */
232 memset(ht_info
->supp_mcs_set
, 0, 16);
233 ht_info
->supp_mcs_set
[0] = 0xff;
234 ht_info
->supp_mcs_set
[1] = 0xff;
235 ht_info
->supp_mcs_set
[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED
;
238 static int ath_rate2idx(struct ath_softc
*sc
, int rate
)
240 int i
= 0, cur_band
, n_rates
;
241 struct ieee80211_hw
*hw
= sc
->hw
;
243 cur_band
= hw
->conf
.channel
->band
;
244 n_rates
= sc
->sbands
[cur_band
].n_bitrates
;
246 for (i
= 0; i
< n_rates
; i
++) {
247 if (sc
->sbands
[cur_band
].bitrates
[i
].bitrate
== rate
)
252 * NB:mac80211 validates rx rate index against the supported legacy rate
253 * index only (should be done against ht rates also), return the highest
254 * legacy rate index for rx rate which does not match any one of the
255 * supported basic and extended rates to make mac80211 happy.
256 * The following hack will be cleaned up once the issue with
257 * the rx rate index validation in mac80211 is fixed.
264 static void ath9k_rx_prepare(struct ath_softc
*sc
,
266 struct ath_recv_status
*status
,
267 struct ieee80211_rx_status
*rx_status
)
269 struct ieee80211_hw
*hw
= sc
->hw
;
270 struct ieee80211_channel
*curchan
= hw
->conf
.channel
;
272 memset(rx_status
, 0, sizeof(struct ieee80211_rx_status
));
274 rx_status
->mactime
= status
->tsf
;
275 rx_status
->band
= curchan
->band
;
276 rx_status
->freq
= curchan
->center_freq
;
277 rx_status
->noise
= sc
->sc_ani
.sc_noise_floor
;
278 rx_status
->signal
= rx_status
->noise
+ status
->rssi
;
279 rx_status
->rate_idx
= ath_rate2idx(sc
, (status
->rateKbps
/ 100));
280 rx_status
->antenna
= status
->antenna
;
282 /* XXX Fix me, 64 cannot be the max rssi value, rigure it out */
283 rx_status
->qual
= status
->rssi
* 100 / 64;
285 if (status
->flags
& ATH_RX_MIC_ERROR
)
286 rx_status
->flag
|= RX_FLAG_MMIC_ERROR
;
287 if (status
->flags
& ATH_RX_FCS_ERROR
)
288 rx_status
->flag
|= RX_FLAG_FAILED_FCS_CRC
;
290 rx_status
->flag
|= RX_FLAG_TSFT
;
293 static u8
parse_mpdudensity(u8 mpdudensity
)
296 * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
297 * 0 for no restriction
306 switch (mpdudensity
) {
312 /* Our lower layer calculations limit our precision to
328 static void ath9k_ht_conf(struct ath_softc
*sc
,
329 struct ieee80211_bss_conf
*bss_conf
)
331 #define IEEE80211_HT_CAP_40MHZ_INTOLERANT BIT(14)
332 struct ath_ht_info
*ht_info
= &sc
->sc_ht_info
;
334 if (bss_conf
->assoc_ht
) {
335 ht_info
->ext_chan_offset
=
336 bss_conf
->ht_bss_conf
->bss_cap
&
337 IEEE80211_HT_IE_CHA_SEC_OFFSET
;
339 if (!(bss_conf
->ht_conf
->cap
&
340 IEEE80211_HT_CAP_40MHZ_INTOLERANT
) &&
341 (bss_conf
->ht_bss_conf
->bss_cap
&
342 IEEE80211_HT_IE_CHA_WIDTH
))
343 ht_info
->tx_chan_width
= ATH9K_HT_MACMODE_2040
;
345 ht_info
->tx_chan_width
= ATH9K_HT_MACMODE_20
;
347 ath9k_hw_set11nmac2040(sc
->sc_ah
, ht_info
->tx_chan_width
);
348 ht_info
->maxampdu
= 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR
+
349 bss_conf
->ht_conf
->ampdu_factor
);
350 ht_info
->mpdudensity
=
351 parse_mpdudensity(bss_conf
->ht_conf
->ampdu_density
);
355 #undef IEEE80211_HT_CAP_40MHZ_INTOLERANT
358 static void ath9k_bss_assoc_info(struct ath_softc
*sc
,
359 struct ieee80211_bss_conf
*bss_conf
)
361 struct ieee80211_hw
*hw
= sc
->hw
;
362 struct ieee80211_channel
*curchan
= hw
->conf
.channel
;
365 DECLARE_MAC_BUF(mac
);
367 if (bss_conf
->assoc
) {
368 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: Bss Info ASSOC %d\n",
372 avp
= sc
->sc_vaps
[0];
374 DPRINTF(sc
, ATH_DBG_FATAL
, "%s: Invalid interface\n",
379 /* New association, store aid */
380 if (avp
->av_opmode
== ATH9K_M_STA
) {
381 sc
->sc_curaid
= bss_conf
->aid
;
382 ath9k_hw_write_associd(sc
->sc_ah
, sc
->sc_curbssid
,
386 /* Configure the beacon */
387 ath_beacon_config(sc
, 0);
388 sc
->sc_flags
|= SC_OP_BEACONS
;
390 /* Reset rssi stats */
391 sc
->sc_halstats
.ns_avgbrssi
= ATH_RSSI_DUMMY_MARKER
;
392 sc
->sc_halstats
.ns_avgrssi
= ATH_RSSI_DUMMY_MARKER
;
393 sc
->sc_halstats
.ns_avgtxrssi
= ATH_RSSI_DUMMY_MARKER
;
394 sc
->sc_halstats
.ns_avgtxrate
= ATH_RATE_DUMMY_MARKER
;
396 /* Update chainmask */
397 ath_update_chainmask(sc
, bss_conf
->assoc_ht
);
399 DPRINTF(sc
, ATH_DBG_CONFIG
,
400 "%s: bssid %s aid 0x%x\n",
402 print_mac(mac
, sc
->sc_curbssid
), sc
->sc_curaid
);
404 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: Set channel: %d MHz\n",
406 curchan
->center_freq
);
408 pos
= ath_get_channel(sc
, curchan
);
410 DPRINTF(sc
, ATH_DBG_FATAL
,
411 "%s: Invalid channel\n", __func__
);
415 if (hw
->conf
.ht_conf
.ht_supported
)
416 sc
->sc_ah
->ah_channels
[pos
].chanmode
=
417 ath_get_extchanmode(sc
, curchan
);
419 sc
->sc_ah
->ah_channels
[pos
].chanmode
=
420 (curchan
->band
== IEEE80211_BAND_2GHZ
) ?
421 CHANNEL_G
: CHANNEL_A
;
423 /* set h/w channel */
424 if (ath_set_channel(sc
, &sc
->sc_ah
->ah_channels
[pos
]) < 0)
425 DPRINTF(sc
, ATH_DBG_FATAL
,
426 "%s: Unable to set channel\n",
429 ath_rate_newstate(sc
, avp
);
430 /* Update ratectrl about the new state */
431 ath_rc_node_update(hw
, avp
->rc_node
);
434 mod_timer(&sc
->sc_ani
.timer
,
435 jiffies
+ msecs_to_jiffies(ATH_ANI_POLLINTERVAL
));
438 DPRINTF(sc
, ATH_DBG_CONFIG
,
439 "%s: Bss Info DISSOC\n", __func__
);
444 void ath_get_beaconconfig(struct ath_softc
*sc
,
446 struct ath_beacon_config
*conf
)
448 struct ieee80211_hw
*hw
= sc
->hw
;
450 /* fill in beacon config data */
452 conf
->beacon_interval
= hw
->conf
.beacon_int
;
453 conf
->listen_interval
= 100;
454 conf
->dtim_count
= 1;
455 conf
->bmiss_timeout
= ATH_DEFAULT_BMISS_LIMIT
* conf
->listen_interval
;
458 void ath_tx_complete(struct ath_softc
*sc
, struct sk_buff
*skb
,
459 struct ath_xmit_status
*tx_status
, struct ath_node
*an
)
461 struct ieee80211_hw
*hw
= sc
->hw
;
462 struct ieee80211_tx_info
*tx_info
= IEEE80211_SKB_CB(skb
);
464 DPRINTF(sc
, ATH_DBG_XMIT
,
465 "%s: TX complete: skb: %p\n", __func__
, skb
);
467 if (tx_info
->flags
& IEEE80211_TX_CTL_NO_ACK
||
468 tx_info
->flags
& IEEE80211_TX_STAT_TX_FILTERED
) {
469 /* free driver's private data area of tx_info */
470 if (tx_info
->driver_data
[0] != NULL
)
471 kfree(tx_info
->driver_data
[0]);
472 tx_info
->driver_data
[0] = NULL
;
475 if (tx_status
->flags
& ATH_TX_BAR
) {
476 tx_info
->flags
|= IEEE80211_TX_STAT_AMPDU_NO_BACK
;
477 tx_status
->flags
&= ~ATH_TX_BAR
;
480 if (tx_status
->flags
& (ATH_TX_ERROR
| ATH_TX_XRETRY
)) {
481 if (!(tx_info
->flags
& IEEE80211_TX_CTL_NO_ACK
)) {
482 /* Frame was not ACKed, but an ACK was expected */
483 tx_info
->status
.excessive_retries
= 1;
486 /* Frame was ACKed */
487 tx_info
->flags
|= IEEE80211_TX_STAT_ACK
;
490 tx_info
->status
.retry_count
= tx_status
->retries
;
492 ieee80211_tx_status(hw
, skb
);
494 ath_node_put(sc
, an
, ATH9K_BH_STATUS_CHANGE
);
497 int _ath_rx_indicate(struct ath_softc
*sc
,
499 struct ath_recv_status
*status
,
502 struct ieee80211_hw
*hw
= sc
->hw
;
503 struct ath_node
*an
= NULL
;
504 struct ieee80211_rx_status rx_status
;
505 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*) skb
->data
;
506 int hdrlen
= ieee80211_get_hdrlen_from_skb(skb
);
510 /* see if any padding is done by the hw and remove it */
512 padsize
= hdrlen
% 4;
513 memmove(skb
->data
+ padsize
, skb
->data
, hdrlen
);
514 skb_pull(skb
, padsize
);
517 /* Prepare rx status */
518 ath9k_rx_prepare(sc
, skb
, status
, &rx_status
);
520 if (!(keyix
== ATH9K_RXKEYIX_INVALID
) &&
521 !(status
->flags
& ATH_RX_DECRYPT_ERROR
)) {
522 rx_status
.flag
|= RX_FLAG_DECRYPTED
;
523 } else if ((le16_to_cpu(hdr
->frame_control
) & IEEE80211_FCTL_PROTECTED
)
524 && !(status
->flags
& ATH_RX_DECRYPT_ERROR
)
525 && skb
->len
>= hdrlen
+ 4) {
526 keyix
= skb
->data
[hdrlen
+ 3] >> 6;
528 if (test_bit(keyix
, sc
->sc_keymap
))
529 rx_status
.flag
|= RX_FLAG_DECRYPTED
;
532 spin_lock_bh(&sc
->node_lock
);
533 an
= ath_node_find(sc
, hdr
->addr2
);
534 spin_unlock_bh(&sc
->node_lock
);
538 hw
->conf
.ht_conf
.ht_supported
,
541 if (!an
|| (st
!= ATH_RX_CONSUMED
))
542 __ieee80211_rx(hw
, skb
, &rx_status
);
547 int ath_rx_subframe(struct ath_node
*an
,
549 struct ath_recv_status
*status
)
551 struct ath_softc
*sc
= an
->an_sc
;
552 struct ieee80211_hw
*hw
= sc
->hw
;
553 struct ieee80211_rx_status rx_status
;
555 /* Prepare rx status */
556 ath9k_rx_prepare(sc
, skb
, status
, &rx_status
);
557 if (!(status
->flags
& ATH_RX_DECRYPT_ERROR
))
558 rx_status
.flag
|= RX_FLAG_DECRYPTED
;
560 __ieee80211_rx(hw
, skb
, &rx_status
);
565 /********************************/
567 /********************************/
569 static void ath_led_brightness(struct led_classdev
*led_cdev
,
570 enum led_brightness brightness
)
572 struct ath_led
*led
= container_of(led_cdev
, struct ath_led
, led_cdev
);
573 struct ath_softc
*sc
= led
->sc
;
575 switch (brightness
) {
577 if (led
->led_type
== ATH_LED_ASSOC
||
578 led
->led_type
== ATH_LED_RADIO
)
579 sc
->sc_flags
&= ~SC_OP_LED_ASSOCIATED
;
580 ath9k_hw_set_gpio(sc
->sc_ah
, ATH_LED_PIN
,
581 (led
->led_type
== ATH_LED_RADIO
) ? 1 :
582 !!(sc
->sc_flags
& SC_OP_LED_ASSOCIATED
));
585 if (led
->led_type
== ATH_LED_ASSOC
)
586 sc
->sc_flags
|= SC_OP_LED_ASSOCIATED
;
587 ath9k_hw_set_gpio(sc
->sc_ah
, ATH_LED_PIN
, 0);
594 static int ath_register_led(struct ath_softc
*sc
, struct ath_led
*led
,
600 led
->led_cdev
.name
= led
->name
;
601 led
->led_cdev
.default_trigger
= trigger
;
602 led
->led_cdev
.brightness_set
= ath_led_brightness
;
604 ret
= led_classdev_register(wiphy_dev(sc
->hw
->wiphy
), &led
->led_cdev
);
606 DPRINTF(sc
, ATH_DBG_FATAL
,
607 "Failed to register led:%s", led
->name
);
613 static void ath_unregister_led(struct ath_led
*led
)
615 if (led
->registered
) {
616 led_classdev_unregister(&led
->led_cdev
);
621 static void ath_deinit_leds(struct ath_softc
*sc
)
623 ath_unregister_led(&sc
->assoc_led
);
624 sc
->sc_flags
&= ~SC_OP_LED_ASSOCIATED
;
625 ath_unregister_led(&sc
->tx_led
);
626 ath_unregister_led(&sc
->rx_led
);
627 ath_unregister_led(&sc
->radio_led
);
628 ath9k_hw_set_gpio(sc
->sc_ah
, ATH_LED_PIN
, 1);
631 static void ath_init_leds(struct ath_softc
*sc
)
636 /* Configure gpio 1 for output */
637 ath9k_hw_cfg_output(sc
->sc_ah
, ATH_LED_PIN
,
638 AR_GPIO_OUTPUT_MUX_AS_OUTPUT
);
639 /* LED off, active low */
640 ath9k_hw_set_gpio(sc
->sc_ah
, ATH_LED_PIN
, 1);
642 trigger
= ieee80211_get_radio_led_name(sc
->hw
);
643 snprintf(sc
->radio_led
.name
, sizeof(sc
->radio_led
.name
),
644 "ath9k-%s:radio", wiphy_name(sc
->hw
->wiphy
));
645 ret
= ath_register_led(sc
, &sc
->radio_led
, trigger
);
646 sc
->radio_led
.led_type
= ATH_LED_RADIO
;
650 trigger
= ieee80211_get_assoc_led_name(sc
->hw
);
651 snprintf(sc
->assoc_led
.name
, sizeof(sc
->assoc_led
.name
),
652 "ath9k-%s:assoc", wiphy_name(sc
->hw
->wiphy
));
653 ret
= ath_register_led(sc
, &sc
->assoc_led
, trigger
);
654 sc
->assoc_led
.led_type
= ATH_LED_ASSOC
;
658 trigger
= ieee80211_get_tx_led_name(sc
->hw
);
659 snprintf(sc
->tx_led
.name
, sizeof(sc
->tx_led
.name
),
660 "ath9k-%s:tx", wiphy_name(sc
->hw
->wiphy
));
661 ret
= ath_register_led(sc
, &sc
->tx_led
, trigger
);
662 sc
->tx_led
.led_type
= ATH_LED_TX
;
666 trigger
= ieee80211_get_rx_led_name(sc
->hw
);
667 snprintf(sc
->rx_led
.name
, sizeof(sc
->rx_led
.name
),
668 "ath9k-%s:rx", wiphy_name(sc
->hw
->wiphy
));
669 ret
= ath_register_led(sc
, &sc
->rx_led
, trigger
);
670 sc
->rx_led
.led_type
= ATH_LED_RX
;
681 /*******************/
683 /*******************/
685 static void ath_radio_enable(struct ath_softc
*sc
)
687 struct ath_hal
*ah
= sc
->sc_ah
;
690 spin_lock_bh(&sc
->sc_resetlock
);
691 if (!ath9k_hw_reset(ah
, ah
->ah_curchan
,
692 sc
->sc_ht_info
.tx_chan_width
,
695 sc
->sc_ht_extprotspacing
,
697 DPRINTF(sc
, ATH_DBG_FATAL
,
698 "%s: unable to reset channel %u (%uMhz) "
699 "flags 0x%x hal status %u\n", __func__
,
700 ath9k_hw_mhz2ieee(ah
,
701 ah
->ah_curchan
->channel
,
702 ah
->ah_curchan
->channelFlags
),
703 ah
->ah_curchan
->channel
,
704 ah
->ah_curchan
->channelFlags
, status
);
706 spin_unlock_bh(&sc
->sc_resetlock
);
708 ath_update_txpow(sc
);
709 if (ath_startrecv(sc
) != 0) {
710 DPRINTF(sc
, ATH_DBG_FATAL
,
711 "%s: unable to restart recv logic\n", __func__
);
715 if (sc
->sc_flags
& SC_OP_BEACONS
)
716 ath_beacon_config(sc
, ATH_IF_ID_ANY
); /* restart beacons */
718 /* Re-Enable interrupts */
719 ath9k_hw_set_interrupts(ah
, sc
->sc_imask
);
722 ath9k_hw_cfg_output(ah
, ATH_LED_PIN
,
723 AR_GPIO_OUTPUT_MUX_AS_OUTPUT
);
724 ath9k_hw_set_gpio(ah
, ATH_LED_PIN
, 0);
726 ieee80211_wake_queues(sc
->hw
);
729 static void ath_radio_disable(struct ath_softc
*sc
)
731 struct ath_hal
*ah
= sc
->sc_ah
;
735 ieee80211_stop_queues(sc
->hw
);
738 ath9k_hw_set_gpio(ah
, ATH_LED_PIN
, 1);
739 ath9k_hw_cfg_gpio_input(ah
, ATH_LED_PIN
);
741 /* Disable interrupts */
742 ath9k_hw_set_interrupts(ah
, 0);
744 ath_draintxq(sc
, false); /* clear pending tx frames */
745 ath_stoprecv(sc
); /* turn off frame recv */
746 ath_flushrecv(sc
); /* flush recv queue */
748 spin_lock_bh(&sc
->sc_resetlock
);
749 if (!ath9k_hw_reset(ah
, ah
->ah_curchan
,
750 sc
->sc_ht_info
.tx_chan_width
,
753 sc
->sc_ht_extprotspacing
,
755 DPRINTF(sc
, ATH_DBG_FATAL
,
756 "%s: unable to reset channel %u (%uMhz) "
757 "flags 0x%x hal status %u\n", __func__
,
758 ath9k_hw_mhz2ieee(ah
,
759 ah
->ah_curchan
->channel
,
760 ah
->ah_curchan
->channelFlags
),
761 ah
->ah_curchan
->channel
,
762 ah
->ah_curchan
->channelFlags
, status
);
764 spin_unlock_bh(&sc
->sc_resetlock
);
766 ath9k_hw_phy_disable(ah
);
767 ath9k_hw_setpower(ah
, ATH9K_PM_FULL_SLEEP
);
770 static bool ath_is_rfkill_set(struct ath_softc
*sc
)
772 struct ath_hal
*ah
= sc
->sc_ah
;
774 return ath9k_hw_gpio_get(ah
, ah
->ah_rfkill_gpio
) ==
775 ah
->ah_rfkill_polarity
;
778 /* h/w rfkill poll function */
779 static void ath_rfkill_poll(struct work_struct
*work
)
781 struct ath_softc
*sc
= container_of(work
, struct ath_softc
,
782 rf_kill
.rfkill_poll
.work
);
785 if (sc
->sc_flags
& SC_OP_INVALID
)
788 radio_on
= !ath_is_rfkill_set(sc
);
791 * enable/disable radio only when there is a
792 * state change in RF switch
794 if (radio_on
== !!(sc
->sc_flags
& SC_OP_RFKILL_HW_BLOCKED
)) {
795 enum rfkill_state state
;
797 if (sc
->sc_flags
& SC_OP_RFKILL_SW_BLOCKED
) {
798 state
= radio_on
? RFKILL_STATE_SOFT_BLOCKED
799 : RFKILL_STATE_HARD_BLOCKED
;
800 } else if (radio_on
) {
801 ath_radio_enable(sc
);
802 state
= RFKILL_STATE_UNBLOCKED
;
804 ath_radio_disable(sc
);
805 state
= RFKILL_STATE_HARD_BLOCKED
;
808 if (state
== RFKILL_STATE_HARD_BLOCKED
)
809 sc
->sc_flags
|= SC_OP_RFKILL_HW_BLOCKED
;
811 sc
->sc_flags
&= ~SC_OP_RFKILL_HW_BLOCKED
;
813 rfkill_force_state(sc
->rf_kill
.rfkill
, state
);
816 queue_delayed_work(sc
->hw
->workqueue
, &sc
->rf_kill
.rfkill_poll
,
817 msecs_to_jiffies(ATH_RFKILL_POLL_INTERVAL
));
820 /* s/w rfkill handler */
821 static int ath_sw_toggle_radio(void *data
, enum rfkill_state state
)
823 struct ath_softc
*sc
= data
;
826 case RFKILL_STATE_SOFT_BLOCKED
:
827 if (!(sc
->sc_flags
& (SC_OP_RFKILL_HW_BLOCKED
|
828 SC_OP_RFKILL_SW_BLOCKED
)))
829 ath_radio_disable(sc
);
830 sc
->sc_flags
|= SC_OP_RFKILL_SW_BLOCKED
;
832 case RFKILL_STATE_UNBLOCKED
:
833 if ((sc
->sc_flags
& SC_OP_RFKILL_SW_BLOCKED
)) {
834 sc
->sc_flags
&= ~SC_OP_RFKILL_SW_BLOCKED
;
835 if (sc
->sc_flags
& SC_OP_RFKILL_HW_BLOCKED
) {
836 DPRINTF(sc
, ATH_DBG_FATAL
, "Can't turn on the"
837 "radio as it is disabled by h/w \n");
840 ath_radio_enable(sc
);
848 /* Init s/w rfkill */
849 static int ath_init_sw_rfkill(struct ath_softc
*sc
)
851 sc
->rf_kill
.rfkill
= rfkill_allocate(wiphy_dev(sc
->hw
->wiphy
),
853 if (!sc
->rf_kill
.rfkill
) {
854 DPRINTF(sc
, ATH_DBG_FATAL
, "Failed to allocate rfkill\n");
858 snprintf(sc
->rf_kill
.rfkill_name
, sizeof(sc
->rf_kill
.rfkill_name
),
859 "ath9k-%s:rfkill", wiphy_name(sc
->hw
->wiphy
));
860 sc
->rf_kill
.rfkill
->name
= sc
->rf_kill
.rfkill_name
;
861 sc
->rf_kill
.rfkill
->data
= sc
;
862 sc
->rf_kill
.rfkill
->toggle_radio
= ath_sw_toggle_radio
;
863 sc
->rf_kill
.rfkill
->state
= RFKILL_STATE_UNBLOCKED
;
864 sc
->rf_kill
.rfkill
->user_claim_unsupported
= 1;
869 /* Deinitialize rfkill */
870 static void ath_deinit_rfkill(struct ath_softc
*sc
)
872 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_RFSILENT
)
873 cancel_delayed_work_sync(&sc
->rf_kill
.rfkill_poll
);
875 if (sc
->sc_flags
& SC_OP_RFKILL_REGISTERED
) {
876 rfkill_unregister(sc
->rf_kill
.rfkill
);
877 sc
->sc_flags
&= ~SC_OP_RFKILL_REGISTERED
;
878 sc
->rf_kill
.rfkill
= NULL
;
881 #endif /* CONFIG_RFKILL */
883 static int ath_detach(struct ath_softc
*sc
)
885 struct ieee80211_hw
*hw
= sc
->hw
;
887 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: Detach ATH hw\n", __func__
);
889 /* Deinit LED control */
894 ath_deinit_rfkill(sc
);
899 ieee80211_unregister_hw(hw
);
901 /* unregister Rate control */
902 ath_rate_control_unregister();
916 static int ath_attach(u16 devid
,
917 struct ath_softc
*sc
)
919 struct ieee80211_hw
*hw
= sc
->hw
;
922 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: Attach ATH hw\n", __func__
);
924 error
= ath_init(devid
, sc
);
930 INIT_LIST_HEAD(&sc
->node_list
);
931 spin_lock_init(&sc
->node_lock
);
933 /* get mac address from hardware and set in mac80211 */
935 SET_IEEE80211_PERM_ADDR(hw
, sc
->sc_myaddr
);
937 /* setup channels and rates */
939 sc
->sbands
[IEEE80211_BAND_2GHZ
].channels
=
940 sc
->channels
[IEEE80211_BAND_2GHZ
];
941 sc
->sbands
[IEEE80211_BAND_2GHZ
].bitrates
=
942 sc
->rates
[IEEE80211_BAND_2GHZ
];
943 sc
->sbands
[IEEE80211_BAND_2GHZ
].band
= IEEE80211_BAND_2GHZ
;
945 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_HT
)
946 /* Setup HT capabilities for 2.4Ghz*/
947 setup_ht_cap(&sc
->sbands
[IEEE80211_BAND_2GHZ
].ht_info
);
949 hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] =
950 &sc
->sbands
[IEEE80211_BAND_2GHZ
];
952 if (test_bit(ATH9K_MODE_11A
, sc
->sc_ah
->ah_caps
.wireless_modes
)) {
953 sc
->sbands
[IEEE80211_BAND_5GHZ
].channels
=
954 sc
->channels
[IEEE80211_BAND_5GHZ
];
955 sc
->sbands
[IEEE80211_BAND_5GHZ
].bitrates
=
956 sc
->rates
[IEEE80211_BAND_5GHZ
];
957 sc
->sbands
[IEEE80211_BAND_5GHZ
].band
=
960 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_HT
)
961 /* Setup HT capabilities for 5Ghz*/
962 setup_ht_cap(&sc
->sbands
[IEEE80211_BAND_5GHZ
].ht_info
);
964 hw
->wiphy
->bands
[IEEE80211_BAND_5GHZ
] =
965 &sc
->sbands
[IEEE80211_BAND_5GHZ
];
968 /* FIXME: Have to figure out proper hw init values later */
971 hw
->ampdu_queues
= 1;
973 /* Register rate control */
974 hw
->rate_control_algorithm
= "ath9k_rate_control";
975 error
= ath_rate_control_register();
977 DPRINTF(sc
, ATH_DBG_FATAL
,
978 "%s: Unable to register rate control "
979 "algorithm:%d\n", __func__
, error
);
980 ath_rate_control_unregister();
984 error
= ieee80211_register_hw(hw
);
986 ath_rate_control_unregister();
990 /* Initialize LED control */
994 /* Initialze h/w Rfkill */
995 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_RFSILENT
)
996 INIT_DELAYED_WORK(&sc
->rf_kill
.rfkill_poll
, ath_rfkill_poll
);
998 /* Initialize s/w rfkill */
999 if (ath_init_sw_rfkill(sc
))
1003 /* initialize tx/rx engine */
1005 error
= ath_tx_init(sc
, ATH_TXBUF
);
1009 error
= ath_rx_init(sc
, ATH_RXBUF
);
1020 static int ath9k_start(struct ieee80211_hw
*hw
)
1022 struct ath_softc
*sc
= hw
->priv
;
1023 struct ieee80211_channel
*curchan
= hw
->conf
.channel
;
1026 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: Starting driver with "
1027 "initial channel: %d MHz\n", __func__
, curchan
->center_freq
);
1029 /* setup initial channel */
1031 pos
= ath_get_channel(sc
, curchan
);
1033 DPRINTF(sc
, ATH_DBG_FATAL
, "%s: Invalid channel\n", __func__
);
1037 sc
->sc_ah
->ah_channels
[pos
].chanmode
=
1038 (curchan
->band
== IEEE80211_BAND_2GHZ
) ? CHANNEL_G
: CHANNEL_A
;
1041 error
= ath_open(sc
, &sc
->sc_ah
->ah_channels
[pos
]);
1043 DPRINTF(sc
, ATH_DBG_FATAL
,
1044 "%s: Unable to complete ath_open\n", __func__
);
1048 #ifdef CONFIG_RFKILL
1049 /* Start rfkill polling */
1050 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_RFSILENT
)
1051 queue_delayed_work(sc
->hw
->workqueue
,
1052 &sc
->rf_kill
.rfkill_poll
, 0);
1054 if (!(sc
->sc_flags
& SC_OP_RFKILL_REGISTERED
)) {
1055 if (rfkill_register(sc
->rf_kill
.rfkill
)) {
1056 DPRINTF(sc
, ATH_DBG_FATAL
,
1057 "Unable to register rfkill\n");
1058 rfkill_free(sc
->rf_kill
.rfkill
);
1060 /* Deinitialize the device */
1062 free_irq(sc
->pdev
->irq
, sc
);
1064 pci_iounmap(sc
->pdev
, sc
->mem
);
1065 pci_release_region(sc
->pdev
, 0);
1066 pci_disable_device(sc
->pdev
);
1067 ieee80211_free_hw(hw
);
1070 sc
->sc_flags
|= SC_OP_RFKILL_REGISTERED
;
1075 ieee80211_wake_queues(hw
);
1079 static int ath9k_tx(struct ieee80211_hw
*hw
,
1080 struct sk_buff
*skb
)
1082 struct ath_softc
*sc
= hw
->priv
;
1083 int hdrlen
, padsize
;
1084 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1087 * As a temporary workaround, assign seq# here; this will likely need
1088 * to be cleaned up to work better with Beacon transmission and virtual
1091 if (info
->flags
& IEEE80211_TX_CTL_ASSIGN_SEQ
) {
1092 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*) skb
->data
;
1093 if (info
->flags
& IEEE80211_TX_CTL_FIRST_FRAGMENT
)
1095 hdr
->seq_ctrl
&= cpu_to_le16(IEEE80211_SCTL_FRAG
);
1096 hdr
->seq_ctrl
|= cpu_to_le16(sc
->seq_no
);
1099 /* Add the padding after the header if this is not already done */
1100 hdrlen
= ieee80211_get_hdrlen_from_skb(skb
);
1102 padsize
= hdrlen
% 4;
1103 if (skb_headroom(skb
) < padsize
)
1105 skb_push(skb
, padsize
);
1106 memmove(skb
->data
, skb
->data
+ padsize
, hdrlen
);
1109 DPRINTF(sc
, ATH_DBG_XMIT
, "%s: transmitting packet, skb: %p\n",
1113 if (ath_tx_start(sc
, skb
) != 0) {
1114 DPRINTF(sc
, ATH_DBG_XMIT
, "%s: TX failed\n", __func__
);
1115 dev_kfree_skb_any(skb
);
1116 /* FIXME: Check for proper return value from ATH_DEV */
1123 static void ath9k_stop(struct ieee80211_hw
*hw
)
1125 struct ath_softc
*sc
= hw
->priv
;
1128 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: Driver halt\n", __func__
);
1130 error
= ath_suspend(sc
);
1132 DPRINTF(sc
, ATH_DBG_CONFIG
,
1133 "%s: Device is no longer present\n", __func__
);
1135 ieee80211_stop_queues(hw
);
1137 #ifdef CONFIG_RFKILL
1138 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_RFSILENT
)
1139 cancel_delayed_work_sync(&sc
->rf_kill
.rfkill_poll
);
1143 static int ath9k_add_interface(struct ieee80211_hw
*hw
,
1144 struct ieee80211_if_init_conf
*conf
)
1146 struct ath_softc
*sc
= hw
->priv
;
1147 int error
, ic_opmode
= 0;
1149 /* Support only vap for now */
1154 switch (conf
->type
) {
1155 case NL80211_IFTYPE_STATION
:
1156 ic_opmode
= ATH9K_M_STA
;
1158 case NL80211_IFTYPE_ADHOC
:
1159 ic_opmode
= ATH9K_M_IBSS
;
1161 case NL80211_IFTYPE_AP
:
1162 ic_opmode
= ATH9K_M_HOSTAP
;
1165 DPRINTF(sc
, ATH_DBG_FATAL
,
1166 "%s: Interface type %d not yet supported\n",
1167 __func__
, conf
->type
);
1171 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: Attach a VAP of type: %d\n",
1175 error
= ath_vap_attach(sc
, 0, conf
->vif
, ic_opmode
);
1177 DPRINTF(sc
, ATH_DBG_FATAL
,
1178 "%s: Unable to attach vap, error: %d\n",
1183 if (conf
->type
== NL80211_IFTYPE_AP
) {
1184 /* TODO: is this a suitable place to start ANI for AP mode? */
1186 mod_timer(&sc
->sc_ani
.timer
,
1187 jiffies
+ msecs_to_jiffies(ATH_ANI_POLLINTERVAL
));
1193 static void ath9k_remove_interface(struct ieee80211_hw
*hw
,
1194 struct ieee80211_if_init_conf
*conf
)
1196 struct ath_softc
*sc
= hw
->priv
;
1197 struct ath_vap
*avp
;
1200 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: Detach VAP\n", __func__
);
1202 avp
= sc
->sc_vaps
[0];
1204 DPRINTF(sc
, ATH_DBG_FATAL
, "%s: Invalid interface\n",
1209 #ifdef CONFIG_SLOW_ANT_DIV
1210 ath_slow_ant_div_stop(&sc
->sc_antdiv
);
1213 del_timer_sync(&sc
->sc_ani
.timer
);
1215 /* Update ratectrl */
1216 ath_rate_newstate(sc
, avp
);
1218 /* Reclaim beacon resources */
1219 if (sc
->sc_ah
->ah_opmode
== ATH9K_M_HOSTAP
||
1220 sc
->sc_ah
->ah_opmode
== ATH9K_M_IBSS
) {
1221 ath9k_hw_stoptxdma(sc
->sc_ah
, sc
->sc_bhalq
);
1222 ath_beacon_return(sc
, avp
);
1225 /* Set interrupt mask */
1226 sc
->sc_imask
&= ~(ATH9K_INT_SWBA
| ATH9K_INT_BMISS
);
1227 ath9k_hw_set_interrupts(sc
->sc_ah
, sc
->sc_imask
& ~ATH9K_INT_GLOBAL
);
1228 sc
->sc_flags
&= ~SC_OP_BEACONS
;
1230 error
= ath_vap_detach(sc
, 0);
1232 DPRINTF(sc
, ATH_DBG_FATAL
,
1233 "%s: Unable to detach vap, error: %d\n",
1237 static int ath9k_config(struct ieee80211_hw
*hw
,
1238 struct ieee80211_conf
*conf
)
1240 struct ath_softc
*sc
= hw
->priv
;
1241 struct ieee80211_channel
*curchan
= hw
->conf
.channel
;
1244 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: Set channel: %d MHz\n",
1246 curchan
->center_freq
);
1248 pos
= ath_get_channel(sc
, curchan
);
1250 DPRINTF(sc
, ATH_DBG_FATAL
, "%s: Invalid channel\n", __func__
);
1254 sc
->sc_ah
->ah_channels
[pos
].chanmode
=
1255 (curchan
->band
== IEEE80211_BAND_2GHZ
) ?
1256 CHANNEL_G
: CHANNEL_A
;
1258 if (sc
->sc_curaid
&& hw
->conf
.ht_conf
.ht_supported
)
1259 sc
->sc_ah
->ah_channels
[pos
].chanmode
=
1260 ath_get_extchanmode(sc
, curchan
);
1262 sc
->sc_config
.txpowlimit
= 2 * conf
->power_level
;
1264 /* set h/w channel */
1265 if (ath_set_channel(sc
, &sc
->sc_ah
->ah_channels
[pos
]) < 0)
1266 DPRINTF(sc
, ATH_DBG_FATAL
, "%s: Unable to set channel\n",
1272 static int ath9k_config_interface(struct ieee80211_hw
*hw
,
1273 struct ieee80211_vif
*vif
,
1274 struct ieee80211_if_conf
*conf
)
1276 struct ath_softc
*sc
= hw
->priv
;
1277 struct ath_hal
*ah
= sc
->sc_ah
;
1278 struct ath_vap
*avp
;
1281 DECLARE_MAC_BUF(mac
);
1283 avp
= sc
->sc_vaps
[0];
1285 DPRINTF(sc
, ATH_DBG_FATAL
, "%s: Invalid interface\n",
1290 /* TODO: Need to decide which hw opmode to use for multi-interface
1292 if (vif
->type
== NL80211_IFTYPE_AP
&&
1293 ah
->ah_opmode
!= ATH9K_M_HOSTAP
) {
1294 ah
->ah_opmode
= ATH9K_M_HOSTAP
;
1295 ath9k_hw_setopmode(ah
);
1296 ath9k_hw_write_associd(ah
, sc
->sc_myaddr
, 0);
1297 /* Request full reset to get hw opmode changed properly */
1298 sc
->sc_flags
|= SC_OP_FULL_RESET
;
1301 if ((conf
->changed
& IEEE80211_IFCC_BSSID
) &&
1302 !is_zero_ether_addr(conf
->bssid
)) {
1303 switch (vif
->type
) {
1304 case NL80211_IFTYPE_STATION
:
1305 case NL80211_IFTYPE_ADHOC
:
1306 /* Update ratectrl about the new state */
1307 ath_rate_newstate(sc
, avp
);
1310 memcpy(sc
->sc_curbssid
, conf
->bssid
, ETH_ALEN
);
1312 ath9k_hw_write_associd(sc
->sc_ah
, sc
->sc_curbssid
,
1315 /* Set aggregation protection mode parameters */
1316 sc
->sc_config
.ath_aggr_prot
= 0;
1319 * Reset our TSF so that its value is lower than the
1320 * beacon that we are trying to catch.
1321 * Only then hw will update its TSF register with the
1322 * new beacon. Reset the TSF before setting the BSSID
1323 * to avoid allowing in any frames that would update
1324 * our TSF only to have us clear it
1325 * immediately thereafter.
1327 ath9k_hw_reset_tsf(sc
->sc_ah
);
1329 /* Disable BMISS interrupt when we're not associated */
1330 ath9k_hw_set_interrupts(sc
->sc_ah
,
1332 ~(ATH9K_INT_SWBA
| ATH9K_INT_BMISS
));
1333 sc
->sc_imask
&= ~(ATH9K_INT_SWBA
| ATH9K_INT_BMISS
);
1335 DPRINTF(sc
, ATH_DBG_CONFIG
,
1336 "%s: RX filter 0x%x bssid %s aid 0x%x\n",
1338 print_mac(mac
, sc
->sc_curbssid
), sc
->sc_curaid
);
1340 /* need to reconfigure the beacon */
1341 sc
->sc_flags
&= ~SC_OP_BEACONS
;
1349 if ((conf
->changed
& IEEE80211_IFCC_BEACON
) &&
1350 ((vif
->type
== NL80211_IFTYPE_ADHOC
) ||
1351 (vif
->type
== NL80211_IFTYPE_AP
))) {
1353 * Allocate and setup the beacon frame.
1355 * Stop any previous beacon DMA. This may be
1356 * necessary, for example, when an ibss merge
1357 * causes reconfiguration; we may be called
1358 * with beacon transmission active.
1360 ath9k_hw_stoptxdma(sc
->sc_ah
, sc
->sc_bhalq
);
1362 error
= ath_beacon_alloc(sc
, 0);
1366 ath_beacon_sync(sc
, 0);
1369 /* Check for WLAN_CAPABILITY_PRIVACY ? */
1370 if ((avp
->av_opmode
!= NL80211_IFTYPE_STATION
)) {
1371 for (i
= 0; i
< IEEE80211_WEP_NKID
; i
++)
1372 if (ath9k_hw_keyisvalid(sc
->sc_ah
, (u16
)i
))
1373 ath9k_hw_keysetmac(sc
->sc_ah
,
1378 /* Only legacy IBSS for now */
1379 if (vif
->type
== NL80211_IFTYPE_ADHOC
)
1380 ath_update_chainmask(sc
, 0);
1385 #define SUPPORTED_FILTERS \
1386 (FIF_PROMISC_IN_BSS | \
1390 FIF_BCN_PRBRESP_PROMISC | \
1393 /* FIXME: sc->sc_full_reset ? */
1394 static void ath9k_configure_filter(struct ieee80211_hw
*hw
,
1395 unsigned int changed_flags
,
1396 unsigned int *total_flags
,
1398 struct dev_mc_list
*mclist
)
1400 struct ath_softc
*sc
= hw
->priv
;
1403 changed_flags
&= SUPPORTED_FILTERS
;
1404 *total_flags
&= SUPPORTED_FILTERS
;
1406 sc
->rx_filter
= *total_flags
;
1407 rfilt
= ath_calcrxfilter(sc
);
1408 ath9k_hw_setrxfilter(sc
->sc_ah
, rfilt
);
1410 if (changed_flags
& FIF_BCN_PRBRESP_PROMISC
) {
1411 if (*total_flags
& FIF_BCN_PRBRESP_PROMISC
)
1412 ath9k_hw_write_associd(sc
->sc_ah
, ath_bcast_mac
, 0);
1415 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: Set HW RX filter: 0x%x\n",
1416 __func__
, sc
->rx_filter
);
1419 static void ath9k_sta_notify(struct ieee80211_hw
*hw
,
1420 struct ieee80211_vif
*vif
,
1421 enum sta_notify_cmd cmd
,
1422 struct ieee80211_sta
*sta
)
1424 struct ath_softc
*sc
= hw
->priv
;
1425 struct ath_node
*an
;
1426 unsigned long flags
;
1427 DECLARE_MAC_BUF(mac
);
1429 spin_lock_irqsave(&sc
->node_lock
, flags
);
1430 an
= ath_node_find(sc
, sta
->addr
);
1431 spin_unlock_irqrestore(&sc
->node_lock
, flags
);
1434 case STA_NOTIFY_ADD
:
1435 spin_lock_irqsave(&sc
->node_lock
, flags
);
1437 ath_node_attach(sc
, sta
->addr
, 0);
1438 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: Attach a node: %s\n",
1439 __func__
, print_mac(mac
, sta
->addr
));
1441 ath_node_get(sc
, sta
->addr
);
1443 spin_unlock_irqrestore(&sc
->node_lock
, flags
);
1445 case STA_NOTIFY_REMOVE
:
1447 DPRINTF(sc
, ATH_DBG_FATAL
,
1448 "%s: Removal of a non-existent node\n",
1451 ath_node_put(sc
, an
, ATH9K_BH_STATUS_INTACT
);
1452 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: Put a node: %s\n",
1454 print_mac(mac
, sta
->addr
));
1462 static int ath9k_conf_tx(struct ieee80211_hw
*hw
,
1464 const struct ieee80211_tx_queue_params
*params
)
1466 struct ath_softc
*sc
= hw
->priv
;
1467 struct ath9k_tx_queue_info qi
;
1470 if (queue
>= WME_NUM_AC
)
1473 qi
.tqi_aifs
= params
->aifs
;
1474 qi
.tqi_cwmin
= params
->cw_min
;
1475 qi
.tqi_cwmax
= params
->cw_max
;
1476 qi
.tqi_burstTime
= params
->txop
;
1477 qnum
= ath_get_hal_qnum(queue
, sc
);
1479 DPRINTF(sc
, ATH_DBG_CONFIG
,
1480 "%s: Configure tx [queue/halq] [%d/%d], "
1481 "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
1490 ret
= ath_txq_update(sc
, qnum
, &qi
);
1492 DPRINTF(sc
, ATH_DBG_FATAL
,
1493 "%s: TXQ Update failed\n", __func__
);
1498 static int ath9k_set_key(struct ieee80211_hw
*hw
,
1499 enum set_key_cmd cmd
,
1500 const u8
*local_addr
,
1502 struct ieee80211_key_conf
*key
)
1504 struct ath_softc
*sc
= hw
->priv
;
1507 DPRINTF(sc
, ATH_DBG_KEYCACHE
, " %s: Set HW Key\n", __func__
);
1511 ret
= ath_key_config(sc
, addr
, key
);
1513 set_bit(key
->keyidx
, sc
->sc_keymap
);
1514 key
->hw_key_idx
= key
->keyidx
;
1515 /* push IV and Michael MIC generation to stack */
1516 key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV
;
1517 if (key
->alg
== ALG_TKIP
)
1518 key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_MMIC
;
1522 ath_key_delete(sc
, key
);
1523 clear_bit(key
->keyidx
, sc
->sc_keymap
);
1532 static void ath9k_bss_info_changed(struct ieee80211_hw
*hw
,
1533 struct ieee80211_vif
*vif
,
1534 struct ieee80211_bss_conf
*bss_conf
,
1537 struct ath_softc
*sc
= hw
->priv
;
1539 if (changed
& BSS_CHANGED_ERP_PREAMBLE
) {
1540 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: BSS Changed PREAMBLE %d\n",
1542 bss_conf
->use_short_preamble
);
1543 if (bss_conf
->use_short_preamble
)
1544 sc
->sc_flags
|= SC_OP_PREAMBLE_SHORT
;
1546 sc
->sc_flags
&= ~SC_OP_PREAMBLE_SHORT
;
1549 if (changed
& BSS_CHANGED_ERP_CTS_PROT
) {
1550 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: BSS Changed CTS PROT %d\n",
1552 bss_conf
->use_cts_prot
);
1553 if (bss_conf
->use_cts_prot
&&
1554 hw
->conf
.channel
->band
!= IEEE80211_BAND_5GHZ
)
1555 sc
->sc_flags
|= SC_OP_PROTECT_ENABLE
;
1557 sc
->sc_flags
&= ~SC_OP_PROTECT_ENABLE
;
1560 if (changed
& BSS_CHANGED_HT
) {
1561 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: BSS Changed HT %d\n",
1563 bss_conf
->assoc_ht
);
1564 ath9k_ht_conf(sc
, bss_conf
);
1567 if (changed
& BSS_CHANGED_ASSOC
) {
1568 DPRINTF(sc
, ATH_DBG_CONFIG
, "%s: BSS Changed ASSOC %d\n",
1571 ath9k_bss_assoc_info(sc
, bss_conf
);
1575 static u64
ath9k_get_tsf(struct ieee80211_hw
*hw
)
1578 struct ath_softc
*sc
= hw
->priv
;
1579 struct ath_hal
*ah
= sc
->sc_ah
;
1581 tsf
= ath9k_hw_gettsf64(ah
);
1586 static void ath9k_reset_tsf(struct ieee80211_hw
*hw
)
1588 struct ath_softc
*sc
= hw
->priv
;
1589 struct ath_hal
*ah
= sc
->sc_ah
;
1591 ath9k_hw_reset_tsf(ah
);
1594 static int ath9k_ampdu_action(struct ieee80211_hw
*hw
,
1595 enum ieee80211_ampdu_mlme_action action
,
1596 struct ieee80211_sta
*sta
,
1599 struct ath_softc
*sc
= hw
->priv
;
1603 case IEEE80211_AMPDU_RX_START
:
1604 ret
= ath_rx_aggr_start(sc
, sta
->addr
, tid
, ssn
);
1606 DPRINTF(sc
, ATH_DBG_FATAL
,
1607 "%s: Unable to start RX aggregation\n",
1610 case IEEE80211_AMPDU_RX_STOP
:
1611 ret
= ath_rx_aggr_stop(sc
, sta
->addr
, tid
);
1613 DPRINTF(sc
, ATH_DBG_FATAL
,
1614 "%s: Unable to stop RX aggregation\n",
1617 case IEEE80211_AMPDU_TX_START
:
1618 ret
= ath_tx_aggr_start(sc
, sta
->addr
, tid
, ssn
);
1620 DPRINTF(sc
, ATH_DBG_FATAL
,
1621 "%s: Unable to start TX aggregation\n",
1624 ieee80211_start_tx_ba_cb_irqsafe(hw
, sta
->addr
, tid
);
1626 case IEEE80211_AMPDU_TX_STOP
:
1627 ret
= ath_tx_aggr_stop(sc
, sta
->addr
, tid
);
1629 DPRINTF(sc
, ATH_DBG_FATAL
,
1630 "%s: Unable to stop TX aggregation\n",
1633 ieee80211_stop_tx_ba_cb_irqsafe(hw
, sta
->addr
, tid
);
1636 DPRINTF(sc
, ATH_DBG_FATAL
,
1637 "%s: Unknown AMPDU action\n", __func__
);
1643 static struct ieee80211_ops ath9k_ops
= {
1645 .start
= ath9k_start
,
1647 .add_interface
= ath9k_add_interface
,
1648 .remove_interface
= ath9k_remove_interface
,
1649 .config
= ath9k_config
,
1650 .config_interface
= ath9k_config_interface
,
1651 .configure_filter
= ath9k_configure_filter
,
1653 .sta_notify
= ath9k_sta_notify
,
1654 .conf_tx
= ath9k_conf_tx
,
1655 .get_tx_stats
= NULL
,
1656 .bss_info_changed
= ath9k_bss_info_changed
,
1658 .set_key
= ath9k_set_key
,
1660 .get_tkip_seq
= NULL
,
1661 .set_rts_threshold
= NULL
,
1662 .set_frag_threshold
= NULL
,
1663 .set_retry_limit
= NULL
,
1664 .get_tsf
= ath9k_get_tsf
,
1665 .reset_tsf
= ath9k_reset_tsf
,
1666 .tx_last_beacon
= NULL
,
1667 .ampdu_action
= ath9k_ampdu_action
1670 static int ath_pci_probe(struct pci_dev
*pdev
, const struct pci_device_id
*id
)
1673 struct ath_softc
*sc
;
1674 struct ieee80211_hw
*hw
;
1675 const char *athname
;
1680 if (pci_enable_device(pdev
))
1683 /* XXX 32-bit addressing only */
1684 if (pci_set_dma_mask(pdev
, 0xffffffff)) {
1685 printk(KERN_ERR
"ath_pci: 32-bit DMA not available\n");
1691 * Cache line size is used to size and align various
1692 * structures used to communicate with the hardware.
1694 pci_read_config_byte(pdev
, PCI_CACHE_LINE_SIZE
, &csz
);
1697 * Linux 2.4.18 (at least) writes the cache line size
1698 * register as a 16-bit wide register which is wrong.
1699 * We must have this setup properly for rx buffer
1700 * DMA to work so force a reasonable value here if it
1703 csz
= L1_CACHE_BYTES
/ sizeof(u32
);
1704 pci_write_config_byte(pdev
, PCI_CACHE_LINE_SIZE
, csz
);
1707 * The default setting of latency timer yields poor results,
1708 * set it to the value used by other systems. It may be worth
1709 * tweaking this setting more.
1711 pci_write_config_byte(pdev
, PCI_LATENCY_TIMER
, 0xa8);
1713 pci_set_master(pdev
);
1716 * Disable the RETRY_TIMEOUT register (0x41) to keep
1717 * PCI Tx retries from interfering with C3 CPU state.
1719 pci_read_config_dword(pdev
, 0x40, &val
);
1720 if ((val
& 0x0000ff00) != 0)
1721 pci_write_config_dword(pdev
, 0x40, val
& 0xffff00ff);
1723 ret
= pci_request_region(pdev
, 0, "ath9k");
1725 dev_err(&pdev
->dev
, "PCI memory region reserve error\n");
1730 mem
= pci_iomap(pdev
, 0, 0);
1732 printk(KERN_ERR
"PCI memory map error\n") ;
1737 hw
= ieee80211_alloc_hw(sizeof(struct ath_softc
), &ath9k_ops
);
1739 printk(KERN_ERR
"ath_pci: no memory for ieee80211_hw\n");
1743 hw
->flags
= IEEE80211_HW_RX_INCLUDES_FCS
|
1744 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING
|
1745 IEEE80211_HW_SIGNAL_DBM
|
1746 IEEE80211_HW_NOISE_DBM
;
1748 hw
->wiphy
->interface_modes
=
1749 BIT(NL80211_IFTYPE_AP
) |
1750 BIT(NL80211_IFTYPE_STATION
) |
1751 BIT(NL80211_IFTYPE_ADHOC
);
1753 SET_IEEE80211_DEV(hw
, &pdev
->dev
);
1754 pci_set_drvdata(pdev
, hw
);
1761 if (ath_attach(id
->device
, sc
) != 0) {
1766 /* setup interrupt service routine */
1768 if (request_irq(pdev
->irq
, ath_isr
, IRQF_SHARED
, "ath", sc
)) {
1769 printk(KERN_ERR
"%s: request_irq failed\n",
1770 wiphy_name(hw
->wiphy
));
1775 athname
= ath9k_hw_probe(id
->vendor
, id
->device
);
1777 printk(KERN_INFO
"%s: %s: mem=0x%lx, irq=%d\n",
1778 wiphy_name(hw
->wiphy
),
1779 athname
? athname
: "Atheros ???",
1780 (unsigned long)mem
, pdev
->irq
);
1786 ieee80211_free_hw(hw
);
1788 pci_iounmap(pdev
, mem
);
1790 pci_release_region(pdev
, 0);
1792 pci_disable_device(pdev
);
1796 static void ath_pci_remove(struct pci_dev
*pdev
)
1798 struct ieee80211_hw
*hw
= pci_get_drvdata(pdev
);
1799 struct ath_softc
*sc
= hw
->priv
;
1800 enum ath9k_int status
;
1803 ath9k_hw_set_interrupts(sc
->sc_ah
, 0);
1805 ath9k_hw_getisr(sc
->sc_ah
, &status
);
1806 sc
->sc_flags
|= SC_OP_INVALID
;
1807 free_irq(pdev
->irq
, sc
);
1811 pci_iounmap(pdev
, sc
->mem
);
1812 pci_release_region(pdev
, 0);
1813 pci_disable_device(pdev
);
1814 ieee80211_free_hw(hw
);
1819 static int ath_pci_suspend(struct pci_dev
*pdev
, pm_message_t state
)
1821 struct ieee80211_hw
*hw
= pci_get_drvdata(pdev
);
1822 struct ath_softc
*sc
= hw
->priv
;
1824 ath9k_hw_set_gpio(sc
->sc_ah
, ATH_LED_PIN
, 1);
1826 #ifdef CONFIG_RFKILL
1827 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_RFSILENT
)
1828 cancel_delayed_work_sync(&sc
->rf_kill
.rfkill_poll
);
1831 pci_save_state(pdev
);
1832 pci_disable_device(pdev
);
1833 pci_set_power_state(pdev
, 3);
1838 static int ath_pci_resume(struct pci_dev
*pdev
)
1840 struct ieee80211_hw
*hw
= pci_get_drvdata(pdev
);
1841 struct ath_softc
*sc
= hw
->priv
;
1845 err
= pci_enable_device(pdev
);
1848 pci_restore_state(pdev
);
1850 * Suspend/Resume resets the PCI configuration space, so we have to
1851 * re-disable the RETRY_TIMEOUT register (0x41) to keep
1852 * PCI Tx retries from interfering with C3 CPU state
1854 pci_read_config_dword(pdev
, 0x40, &val
);
1855 if ((val
& 0x0000ff00) != 0)
1856 pci_write_config_dword(pdev
, 0x40, val
& 0xffff00ff);
1859 ath9k_hw_cfg_output(sc
->sc_ah
, ATH_LED_PIN
,
1860 AR_GPIO_OUTPUT_MUX_AS_OUTPUT
);
1861 ath9k_hw_set_gpio(sc
->sc_ah
, ATH_LED_PIN
, 1);
1863 #ifdef CONFIG_RFKILL
1865 * check the h/w rfkill state on resume
1866 * and start the rfkill poll timer
1868 if (sc
->sc_ah
->ah_caps
.hw_caps
& ATH9K_HW_CAP_RFSILENT
)
1869 queue_delayed_work(sc
->hw
->workqueue
,
1870 &sc
->rf_kill
.rfkill_poll
, 0);
1876 #endif /* CONFIG_PM */
1878 MODULE_DEVICE_TABLE(pci
, ath_pci_id_table
);
1880 static struct pci_driver ath_pci_driver
= {
1882 .id_table
= ath_pci_id_table
,
1883 .probe
= ath_pci_probe
,
1884 .remove
= ath_pci_remove
,
1886 .suspend
= ath_pci_suspend
,
1887 .resume
= ath_pci_resume
,
1888 #endif /* CONFIG_PM */
1891 static int __init
init_ath_pci(void)
1893 printk(KERN_INFO
"%s: %s\n", dev_info
, ATH_PCI_VERSION
);
1895 if (pci_register_driver(&ath_pci_driver
) < 0) {
1897 "ath_pci: No devices found, driver not installed.\n");
1898 pci_unregister_driver(&ath_pci_driver
);
1904 module_init(init_ath_pci
);
1906 static void __exit
exit_ath_pci(void)
1908 pci_unregister_driver(&ath_pci_driver
);
1909 printk(KERN_INFO
"%s: driver unloaded\n", dev_info
);
1911 module_exit(exit_ath_pci
);