2 * Device tables which are exported to userspace via
3 * scripts/mod/file2alias.c. You must keep that file in sync with this
7 #ifndef LINUX_MOD_DEVICETABLE_H
8 #define LINUX_MOD_DEVICETABLE_H
11 #include <linux/types.h>
12 typedef unsigned long kernel_ulong_t
;
15 #define PCI_ANY_ID (~0)
17 struct pci_device_id
{
18 __u32 vendor
, device
; /* Vendor and device ID or PCI_ANY_ID*/
19 __u32 subvendor
, subdevice
; /* Subsystem ID's or PCI_ANY_ID */
20 __u32
class, class_mask
; /* (class,subclass,prog-if) triplet */
21 kernel_ulong_t driver_data
; /* Data private to the driver */
25 #define IEEE1394_MATCH_VENDOR_ID 0x0001
26 #define IEEE1394_MATCH_MODEL_ID 0x0002
27 #define IEEE1394_MATCH_SPECIFIER_ID 0x0004
28 #define IEEE1394_MATCH_VERSION 0x0008
30 struct ieee1394_device_id
{
36 kernel_ulong_t driver_data
37 __attribute__((aligned(sizeof(kernel_ulong_t
))));
42 * Device table entry for "new style" table-driven USB drivers.
43 * User mode code can read these tables to choose which modules to load.
44 * Declare the table as a MODULE_DEVICE_TABLE.
46 * A probe() parameter will point to a matching entry from this table.
47 * Use the driver_info field for each match to hold information tied
48 * to that match: device quirks, etc.
50 * Terminate the driver's table with an all-zeroes entry.
51 * Use the flag values to control which fields are compared.
55 * struct usb_device_id - identifies USB devices for probing and hotplugging
56 * @match_flags: Bit mask controlling of the other fields are used to match
57 * against new devices. Any field except for driver_info may be used,
58 * although some only make sense in conjunction with other fields.
59 * This is usually set by a USB_DEVICE_*() macro, which sets all
60 * other fields in this structure except for driver_info.
61 * @idVendor: USB vendor ID for a device; numbers are assigned
62 * by the USB forum to its members.
63 * @idProduct: Vendor-assigned product ID.
64 * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
65 * This is also used to identify individual product versions, for
66 * a range consisting of a single device.
67 * @bcdDevice_hi: High end of version number range. The range of product
68 * versions is inclusive.
69 * @bDeviceClass: Class of device; numbers are assigned
70 * by the USB forum. Products may choose to implement classes,
71 * or be vendor-specific. Device classes specify behavior of all
72 * the interfaces on a devices.
73 * @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
74 * @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
75 * @bInterfaceClass: Class of interface; numbers are assigned
76 * by the USB forum. Products may choose to implement classes,
77 * or be vendor-specific. Interface classes specify behavior only
78 * of a given interface; other interfaces may support other classes.
79 * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
80 * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
81 * @driver_info: Holds information used by the driver. Usually it holds
82 * a pointer to a descriptor understood by the driver, or perhaps
85 * In most cases, drivers will create a table of device IDs by using
86 * USB_DEVICE(), or similar macros designed for that purpose.
87 * They will then export it to userspace using MODULE_DEVICE_TABLE(),
88 * and provide it to the USB core through their usb_driver structure.
90 * See the usb_match_id() function for information about how matches are
91 * performed. Briefly, you will normally use one of several macros to help
92 * construct these entries. Each entry you provide will either identify
93 * one or more specific products, or will identify a class of products
94 * which have agreed to behave the same. You should put the more specific
95 * matches towards the beginning of your table, so that driver_info can
96 * record quirks of specific products.
98 struct usb_device_id
{
99 /* which fields to match against? */
102 /* Used for product specific matches; range is inclusive */
108 /* Used for device class matches */
110 __u8 bDeviceSubClass
;
111 __u8 bDeviceProtocol
;
113 /* Used for interface class matches */
114 __u8 bInterfaceClass
;
115 __u8 bInterfaceSubClass
;
116 __u8 bInterfaceProtocol
;
118 /* not matched against */
119 kernel_ulong_t driver_info
;
122 /* Some useful macros to use to create struct usb_device_id */
123 #define USB_DEVICE_ID_MATCH_VENDOR 0x0001
124 #define USB_DEVICE_ID_MATCH_PRODUCT 0x0002
125 #define USB_DEVICE_ID_MATCH_DEV_LO 0x0004
126 #define USB_DEVICE_ID_MATCH_DEV_HI 0x0008
127 #define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010
128 #define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020
129 #define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040
130 #define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080
131 #define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100
132 #define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200
134 /* s390 CCW devices */
135 struct ccw_device_id
{
136 __u16 match_flags
; /* which fields to match against */
138 __u16 cu_type
; /* control unit type */
139 __u16 dev_type
; /* device type */
140 __u8 cu_model
; /* control unit model */
141 __u8 dev_model
; /* device model */
143 kernel_ulong_t driver_info
;
146 #define CCW_DEVICE_ID_MATCH_CU_TYPE 0x01
147 #define CCW_DEVICE_ID_MATCH_CU_MODEL 0x02
148 #define CCW_DEVICE_ID_MATCH_DEVICE_TYPE 0x04
149 #define CCW_DEVICE_ID_MATCH_DEVICE_MODEL 0x08
151 /* s390 AP bus devices */
152 struct ap_device_id
{
153 __u16 match_flags
; /* which fields to match against */
154 __u8 dev_type
; /* device type */
157 kernel_ulong_t driver_info
;
160 #define AP_DEVICE_ID_MATCH_DEVICE_TYPE 0x01
164 #define PNP_MAX_DEVICES 8
166 struct pnp_device_id
{
168 kernel_ulong_t driver_data
;
171 struct pnp_card_device_id
{
173 kernel_ulong_t driver_data
;
176 } devs
[PNP_MAX_DEVICES
];
180 #define SERIO_ANY 0xff
182 struct serio_device_id
{
190 * Struct used for matching a device
196 char compatible
[128];
205 struct vio_device_id
{
212 struct pcmcia_device_id
{
220 /* for real multi-function devices */
223 /* for pseudo multi-function devices */
226 __u32 prod_id_hash
[4]
227 __attribute__((aligned(sizeof(__u32
))));
229 /* not matched against in kernelspace*/
231 const char * prod_id
[4];
233 kernel_ulong_t prod_id
[4]
234 __attribute__((aligned(sizeof(kernel_ulong_t
))));
237 /* not matched against */
238 kernel_ulong_t driver_info
;
242 kernel_ulong_t cisfile
;
246 #define PCMCIA_DEV_ID_MATCH_MANF_ID 0x0001
247 #define PCMCIA_DEV_ID_MATCH_CARD_ID 0x0002
248 #define PCMCIA_DEV_ID_MATCH_FUNC_ID 0x0004
249 #define PCMCIA_DEV_ID_MATCH_FUNCTION 0x0008
250 #define PCMCIA_DEV_ID_MATCH_PROD_ID1 0x0010
251 #define PCMCIA_DEV_ID_MATCH_PROD_ID2 0x0020
252 #define PCMCIA_DEV_ID_MATCH_PROD_ID3 0x0040
253 #define PCMCIA_DEV_ID_MATCH_PROD_ID4 0x0080
254 #define PCMCIA_DEV_ID_MATCH_DEVICE_NO 0x0100
255 #define PCMCIA_DEV_ID_MATCH_FAKE_CIS 0x0200
256 #define PCMCIA_DEV_ID_MATCH_ANONYMOUS 0x0400
259 struct i2c_device_id
{
264 #define INPUT_DEVICE_ID_EV_MAX 0x1f
265 #define INPUT_DEVICE_ID_KEY_MAX 0x1ff
266 #define INPUT_DEVICE_ID_REL_MAX 0x0f
267 #define INPUT_DEVICE_ID_ABS_MAX 0x3f
268 #define INPUT_DEVICE_ID_MSC_MAX 0x07
269 #define INPUT_DEVICE_ID_LED_MAX 0x0f
270 #define INPUT_DEVICE_ID_SND_MAX 0x07
271 #define INPUT_DEVICE_ID_FF_MAX 0x7f
272 #define INPUT_DEVICE_ID_SW_MAX 0x0f
274 #define INPUT_DEVICE_ID_MATCH_BUS 1
275 #define INPUT_DEVICE_ID_MATCH_VENDOR 2
276 #define INPUT_DEVICE_ID_MATCH_PRODUCT 4
277 #define INPUT_DEVICE_ID_MATCH_VERSION 8
279 #define INPUT_DEVICE_ID_MATCH_EVBIT 0x0010
280 #define INPUT_DEVICE_ID_MATCH_KEYBIT 0x0020
281 #define INPUT_DEVICE_ID_MATCH_RELBIT 0x0040
282 #define INPUT_DEVICE_ID_MATCH_ABSBIT 0x0080
283 #define INPUT_DEVICE_ID_MATCH_MSCIT 0x0100
284 #define INPUT_DEVICE_ID_MATCH_LEDBIT 0x0200
285 #define INPUT_DEVICE_ID_MATCH_SNDBIT 0x0400
286 #define INPUT_DEVICE_ID_MATCH_FFBIT 0x0800
287 #define INPUT_DEVICE_ID_MATCH_SWBIT 0x1000
289 struct input_device_id
{
291 kernel_ulong_t flags
;
298 kernel_ulong_t evbit
[INPUT_DEVICE_ID_EV_MAX
/ BITS_PER_LONG
+ 1];
299 kernel_ulong_t keybit
[INPUT_DEVICE_ID_KEY_MAX
/ BITS_PER_LONG
+ 1];
300 kernel_ulong_t relbit
[INPUT_DEVICE_ID_REL_MAX
/ BITS_PER_LONG
+ 1];
301 kernel_ulong_t absbit
[INPUT_DEVICE_ID_ABS_MAX
/ BITS_PER_LONG
+ 1];
302 kernel_ulong_t mscbit
[INPUT_DEVICE_ID_MSC_MAX
/ BITS_PER_LONG
+ 1];
303 kernel_ulong_t ledbit
[INPUT_DEVICE_ID_LED_MAX
/ BITS_PER_LONG
+ 1];
304 kernel_ulong_t sndbit
[INPUT_DEVICE_ID_SND_MAX
/ BITS_PER_LONG
+ 1];
305 kernel_ulong_t ffbit
[INPUT_DEVICE_ID_FF_MAX
/ BITS_PER_LONG
+ 1];
306 kernel_ulong_t swbit
[INPUT_DEVICE_ID_SW_MAX
/ BITS_PER_LONG
+ 1];
308 kernel_ulong_t driver_info
;
313 #define EISA_SIG_LEN 8
315 /* The EISA signature, in ASCII form, null terminated */
316 struct eisa_device_id
{
317 char sig
[EISA_SIG_LEN
];
318 kernel_ulong_t driver_data
;
321 #define EISA_DEVICE_MODALIAS_FMT "eisa:s%s"
323 #endif /* LINUX_MOD_DEVICETABLE_H */