[ARM] Fix ebsa110 debug macros
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / mips / pci / fixup-cobalt.c
blob75a01e7648985c2cf20a84b5f76a4b13c03e6d43
1 /*
2 * Cobalt Qube/Raq PCI support
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file "COPYING" in the main directory of this archive
6 * for more details.
8 * Copyright (C) 1995, 1996, 1997, 2002, 2003 by Ralf Baechle
9 * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
11 #include <linux/types.h>
12 #include <linux/pci.h>
13 #include <linux/kernel.h>
14 #include <linux/init.h>
16 #include <asm/pci.h>
17 #include <asm/io.h>
18 #include <asm/gt64120.h>
20 #include <asm/mach-cobalt/cobalt.h>
22 extern int cobalt_board_id;
24 static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
26 if (dev->devfn == PCI_DEVFN(0, 0) &&
27 (dev->class >> 8) == PCI_CLASS_MEMORY_OTHER) {
29 dev->class = (PCI_CLASS_BRIDGE_HOST << 8) | (dev->class & 0xff);
31 printk(KERN_INFO "Galileo: fixed bridge class\n");
35 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
36 qube_raq_galileo_early_fixup);
38 static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev)
40 unsigned short cfgword;
41 unsigned char lt;
43 /* Enable Bus Mastering and fast back to back. */
44 pci_read_config_word(dev, PCI_COMMAND, &cfgword);
45 cfgword |= (PCI_COMMAND_FAST_BACK | PCI_COMMAND_MASTER);
46 pci_write_config_word(dev, PCI_COMMAND, cfgword);
48 /* Enable both ide interfaces. ROM only enables primary one. */
49 pci_write_config_byte(dev, 0x40, 0xb);
51 /* Set latency timer to reasonable value. */
52 pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lt);
53 if (lt < 64)
54 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
55 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
58 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
59 qube_raq_via_bmIDE_fixup);
61 static void qube_raq_galileo_fixup(struct pci_dev *dev)
63 unsigned short galileo_id;
65 if (dev->devfn != PCI_DEVFN(0, 0))
66 return;
68 /* Fix PCI latency-timer and cache-line-size values in Galileo
69 * host bridge.
71 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
72 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
75 * The code described by the comment below has been removed
76 * as it causes bus mastering by the Ethernet controllers
77 * to break under any kind of network load. We always set
78 * the retry timeouts to their maximum.
80 * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--
82 * On all machines prior to Q2, we had the STOP line disconnected
83 * from Galileo to VIA on PCI. The new Galileo does not function
84 * correctly unless we have it connected.
86 * Therefore we must set the disconnect/retry cycle values to
87 * something sensible when using the new Galileo.
89 pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id);
90 galileo_id &= 0xff; /* mask off class info */
92 printk(KERN_INFO "Galileo: revision %u\n", galileo_id);
94 #if 0
95 if (galileo_id >= 0x10) {
96 /* New Galileo, assumes PCI stop line to VIA is connected. */
97 GALILEO_OUTL(0x4020, GT_PCI0_TOR_OFS);
98 } else if (galileo_id == 0x1 || galileo_id == 0x2)
99 #endif
101 signed int timeo;
102 /* XXX WE MUST DO THIS ELSE GALILEO LOCKS UP! -DaveM */
103 timeo = GALILEO_INL(GT_PCI0_TOR_OFS);
104 /* Old Galileo, assumes PCI STOP line to VIA is disconnected. */
105 GALILEO_OUTL(
106 (0xff << 16) | /* retry count */
107 (0xff << 8) | /* timeout 1 */
108 0xff, /* timeout 0 */
109 GT_PCI0_TOR_OFS);
111 /* enable PCI retry exceeded interrupt */
112 GALILEO_OUTL(GALILEO_INTR_RETRY_CTR | GALILEO_INL(GT_INTRMASK_OFS), GT_INTRMASK_OFS);
116 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
117 qube_raq_galileo_fixup);
119 static char irq_tab_qube1[] __initdata = {
120 [COBALT_PCICONF_CPU] = 0,
121 [COBALT_PCICONF_ETH0] = COBALT_QUBE1_ETH0_IRQ,
122 [COBALT_PCICONF_RAQSCSI] = COBALT_SCSI_IRQ,
123 [COBALT_PCICONF_VIA] = 0,
124 [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ,
125 [COBALT_PCICONF_ETH1] = 0
128 static char irq_tab_cobalt[] __initdata = {
129 [COBALT_PCICONF_CPU] = 0,
130 [COBALT_PCICONF_ETH0] = COBALT_ETH0_IRQ,
131 [COBALT_PCICONF_RAQSCSI] = COBALT_SCSI_IRQ,
132 [COBALT_PCICONF_VIA] = 0,
133 [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ,
134 [COBALT_PCICONF_ETH1] = COBALT_ETH1_IRQ
137 static char irq_tab_raq2[] __initdata = {
138 [COBALT_PCICONF_CPU] = 0,
139 [COBALT_PCICONF_ETH0] = COBALT_ETH0_IRQ,
140 [COBALT_PCICONF_RAQSCSI] = COBALT_RAQ_SCSI_IRQ,
141 [COBALT_PCICONF_VIA] = 0,
142 [COBALT_PCICONF_PCISLOT] = COBALT_QUBE_SLOT_IRQ,
143 [COBALT_PCICONF_ETH1] = COBALT_ETH1_IRQ
146 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
148 if (cobalt_board_id < COBALT_BRD_ID_QUBE2)
149 return irq_tab_qube1[slot];
151 if (cobalt_board_id == COBALT_BRD_ID_RAQ2)
152 return irq_tab_raq2[slot];
154 return irq_tab_cobalt[slot];
157 /* Do platform specific device initialization at pci_enable_device() time */
158 int pcibios_plat_dev_init(struct pci_dev *dev)
160 return 0;