2 * Driver for the Solos PCI ADSL2+ card, designed to support Linux by
3 * Traverse Technologies -- http://www.traverse.com.au/
4 * Xrio Limited -- http://www.xrio.com/
7 * Copyright © 2008 Traverse Technologies
8 * Copyright © 2008 Intel Corporation
10 * Authors: Nathan Williams <nathan@traverse.com.au>
11 * David Woodhouse <dwmw2@infradead.org>
12 * Treker Chen <treker@xrio.com>
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License
16 * version 2, as published by the Free Software Foundation.
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
27 #include <linux/interrupt.h>
28 #include <linux/module.h>
29 #include <linux/kernel.h>
30 #include <linux/errno.h>
31 #include <linux/ioport.h>
32 #include <linux/types.h>
33 #include <linux/pci.h>
34 #include <linux/atm.h>
35 #include <linux/atmdev.h>
36 #include <linux/skbuff.h>
37 #include <linux/sysfs.h>
38 #include <linux/device.h>
39 #include <linux/kobject.h>
40 #include <linux/firmware.h>
41 #include <linux/ctype.h>
42 #include <linux/swab.h>
44 #define VERSION "0.07"
45 #define PTAG "solos-pci"
47 #define CONFIG_RAM_SIZE 128
48 #define FLAGS_ADDR 0x7C
49 #define IRQ_EN_ADDR 0x78
51 #define IRQ_CLEAR 0x70
52 #define WRITE_FLASH 0x6C
54 #define FLASH_BLOCK 0x64
55 #define FLASH_BUSY 0x60
56 #define FPGA_MODE 0x5C
57 #define FLASH_MODE 0x58
58 #define TX_DMA_ADDR(port) (0x40 + (4 * (port)))
59 #define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
61 #define DATA_RAM_SIZE 32768
63 #define FPGA_PAGE 528 /* FPGA flash page size*/
64 #define SOLOS_PAGE 512 /* Solos flash page size*/
65 #define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/
66 #define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/
68 #define RX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2)
69 #define TX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2 + BUF_SIZE)
71 #define RX_DMA_SIZE 2048
74 static int atmdebug
= 0;
75 static int firmware_upgrade
= 0;
76 static int fpga_upgrade
= 0;
91 #define SKB_CB(skb) ((struct solos_skb_cb *)skb->cb)
100 void __iomem
*config_regs
;
101 void __iomem
*buffers
;
105 struct atm_dev
*atmdev
[4];
106 struct tasklet_struct tlet
;
108 spinlock_t tx_queue_lock
;
109 spinlock_t cli_queue_lock
;
110 spinlock_t param_queue_lock
;
111 struct list_head param_queue
;
112 struct sk_buff_head tx_queue
[4];
113 struct sk_buff_head cli_queue
[4];
114 struct sk_buff
*tx_skb
[4];
115 struct sk_buff
*rx_skb
[4];
116 wait_queue_head_t param_wq
;
117 wait_queue_head_t fw_wq
;
123 struct list_head list
;
126 struct sk_buff
*response
;
129 #define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data)
131 MODULE_AUTHOR("Traverse Technologies <support@traverse.com.au>");
132 MODULE_DESCRIPTION("Solos PCI driver");
133 MODULE_VERSION(VERSION
);
134 MODULE_LICENSE("GPL");
135 MODULE_PARM_DESC(reset
, "Reset Solos chips on startup");
136 MODULE_PARM_DESC(atmdebug
, "Print ATM data");
137 MODULE_PARM_DESC(firmware_upgrade
, "Initiate Solos firmware upgrade");
138 MODULE_PARM_DESC(fpga_upgrade
, "Initiate FPGA upgrade");
139 module_param(reset
, int, 0444);
140 module_param(atmdebug
, int, 0644);
141 module_param(firmware_upgrade
, int, 0444);
142 module_param(fpga_upgrade
, int, 0444);
144 static void fpga_queue(struct solos_card
*card
, int port
, struct sk_buff
*skb
,
145 struct atm_vcc
*vcc
);
146 static uint32_t fpga_tx(struct solos_card
*);
147 static irqreturn_t
solos_irq(int irq
, void *dev_id
);
148 static struct atm_vcc
* find_vcc(struct atm_dev
*dev
, short vpi
, int vci
);
149 static int list_vccs(int vci
);
150 static void release_vccs(struct atm_dev
*dev
);
151 static int atm_init(struct solos_card
*);
152 static void atm_remove(struct solos_card
*);
153 static int send_command(struct solos_card
*card
, int dev
, const char *buf
, size_t size
);
154 static void solos_bh(unsigned long);
155 static int print_buffer(struct sk_buff
*buf
);
157 static inline void solos_pop(struct atm_vcc
*vcc
, struct sk_buff
*skb
)
162 dev_kfree_skb_any(skb
);
165 static ssize_t
solos_param_show(struct device
*dev
, struct device_attribute
*attr
,
168 struct atm_dev
*atmdev
= container_of(dev
, struct atm_dev
, class_dev
);
169 struct solos_card
*card
= atmdev
->dev_data
;
170 struct solos_param prm
;
172 struct pkt_hdr
*header
;
175 buflen
= strlen(attr
->attr
.name
) + 10;
177 skb
= alloc_skb(sizeof(*header
) + buflen
, GFP_KERNEL
);
179 dev_warn(&card
->dev
->dev
, "Failed to allocate sk_buff in solos_param_show()\n");
183 header
= (void *)skb_put(skb
, sizeof(*header
));
185 buflen
= snprintf((void *)&header
[1], buflen
- 1,
186 "L%05d\n%s\n", current
->pid
, attr
->attr
.name
);
187 skb_put(skb
, buflen
);
189 header
->size
= cpu_to_le16(buflen
);
190 header
->vpi
= cpu_to_le16(0);
191 header
->vci
= cpu_to_le16(0);
192 header
->type
= cpu_to_le16(PKT_COMMAND
);
194 prm
.pid
= current
->pid
;
196 prm
.port
= SOLOS_CHAN(atmdev
);
198 spin_lock_irq(&card
->param_queue_lock
);
199 list_add(&prm
.list
, &card
->param_queue
);
200 spin_unlock_irq(&card
->param_queue_lock
);
202 fpga_queue(card
, prm
.port
, skb
, NULL
);
204 wait_event_timeout(card
->param_wq
, prm
.response
, 5 * HZ
);
206 spin_lock_irq(&card
->param_queue_lock
);
208 spin_unlock_irq(&card
->param_queue_lock
);
213 buflen
= prm
.response
->len
;
214 memcpy(buf
, prm
.response
->data
, buflen
);
215 kfree_skb(prm
.response
);
220 static ssize_t
solos_param_store(struct device
*dev
, struct device_attribute
*attr
,
221 const char *buf
, size_t count
)
223 struct atm_dev
*atmdev
= container_of(dev
, struct atm_dev
, class_dev
);
224 struct solos_card
*card
= atmdev
->dev_data
;
225 struct solos_param prm
;
227 struct pkt_hdr
*header
;
231 buflen
= strlen(attr
->attr
.name
) + 11 + count
;
233 skb
= alloc_skb(sizeof(*header
) + buflen
, GFP_KERNEL
);
235 dev_warn(&card
->dev
->dev
, "Failed to allocate sk_buff in solos_param_store()\n");
239 header
= (void *)skb_put(skb
, sizeof(*header
));
241 buflen
= snprintf((void *)&header
[1], buflen
- 1,
242 "L%05d\n%s\n%s\n", current
->pid
, attr
->attr
.name
, buf
);
244 skb_put(skb
, buflen
);
245 header
->size
= cpu_to_le16(buflen
);
246 header
->vpi
= cpu_to_le16(0);
247 header
->vci
= cpu_to_le16(0);
248 header
->type
= cpu_to_le16(PKT_COMMAND
);
250 prm
.pid
= current
->pid
;
252 prm
.port
= SOLOS_CHAN(atmdev
);
254 spin_lock_irq(&card
->param_queue_lock
);
255 list_add(&prm
.list
, &card
->param_queue
);
256 spin_unlock_irq(&card
->param_queue_lock
);
258 fpga_queue(card
, prm
.port
, skb
, NULL
);
260 wait_event_timeout(card
->param_wq
, prm
.response
, 5 * HZ
);
262 spin_lock_irq(&card
->param_queue_lock
);
264 spin_unlock_irq(&card
->param_queue_lock
);
273 /* Sometimes it has a newline, sometimes it doesn't. */
274 if (skb
->data
[buflen
- 1] == '\n')
277 if (buflen
== 2 && !strncmp(skb
->data
, "OK", 2))
279 else if (buflen
== 5 && !strncmp(skb
->data
, "ERROR", 5))
282 /* We know we have enough space allocated for this; we allocated
284 skb
->data
[buflen
] = 0;
286 dev_warn(&card
->dev
->dev
, "Unexpected parameter response: '%s'\n",
295 static char *next_string(struct sk_buff
*skb
)
298 char *this = skb
->data
;
300 for (i
= 0; i
< skb
->len
; i
++) {
301 if (this[i
] == '\n') {
303 skb_pull(skb
, i
+ 1);
306 if (!isprint(this[i
]))
313 * Status packet has fields separated by \n, starting with a version number
314 * for the information therein. Fields are....
317 * RxBitRate (version >= 1)
318 * TxBitRate (version >= 1)
319 * State (version >= 1)
320 * LocalSNRMargin (version >= 1)
321 * LocalLineAttn (version >= 1)
323 static int process_status(struct solos_card
*card
, int port
, struct sk_buff
*skb
)
325 char *str
, *end
, *state_str
, *snr
, *attn
;
326 int ver
, rate_up
, rate_down
;
328 if (!card
->atmdev
[port
])
331 str
= next_string(skb
);
335 ver
= simple_strtol(str
, NULL
, 10);
337 dev_warn(&card
->dev
->dev
, "Unexpected status interrupt version %d\n",
342 str
= next_string(skb
);
345 if (!strcmp(str
, "ERROR")) {
346 dev_dbg(&card
->dev
->dev
, "Status packet indicated Solos error on port %d (starting up?)\n",
351 rate_down
= simple_strtol(str
, &end
, 10);
355 str
= next_string(skb
);
358 rate_up
= simple_strtol(str
, &end
, 10);
362 state_str
= next_string(skb
);
366 /* Anything but 'Showtime' is down */
367 if (strcmp(state_str
, "Showtime")) {
368 card
->atmdev
[port
]->signal
= ATM_PHY_SIG_LOST
;
369 release_vccs(card
->atmdev
[port
]);
370 dev_info(&card
->dev
->dev
, "Port %d: %s\n", port
, state_str
);
374 snr
= next_string(skb
);
377 attn
= next_string(skb
);
381 dev_info(&card
->dev
->dev
, "Port %d: %s @%d/%d kb/s%s%s%s%s\n",
382 port
, state_str
, rate_down
/1000, rate_up
/1000,
383 snr
[0]?", SNR ":"", snr
, attn
[0]?", Attn ":"", attn
);
385 card
->atmdev
[port
]->link_rate
= rate_down
/ 424;
386 card
->atmdev
[port
]->signal
= ATM_PHY_SIG_FOUND
;
391 static int process_command(struct solos_card
*card
, int port
, struct sk_buff
*skb
)
393 struct solos_param
*prm
;
401 if (skb
->data
[0] != 'L' || !isdigit(skb
->data
[1]) ||
402 !isdigit(skb
->data
[2]) || !isdigit(skb
->data
[3]) ||
403 !isdigit(skb
->data
[4]) || !isdigit(skb
->data
[5]) ||
404 skb
->data
[6] != '\n')
407 cmdpid
= simple_strtol(&skb
->data
[1], NULL
, 10);
409 spin_lock_irqsave(&card
->param_queue_lock
, flags
);
410 list_for_each_entry(prm
, &card
->param_queue
, list
) {
411 if (prm
->port
== port
&& prm
->pid
== cmdpid
) {
414 wake_up(&card
->param_wq
);
419 spin_unlock_irqrestore(&card
->param_queue_lock
, flags
);
423 static ssize_t
console_show(struct device
*dev
, struct device_attribute
*attr
,
426 struct atm_dev
*atmdev
= container_of(dev
, struct atm_dev
, class_dev
);
427 struct solos_card
*card
= atmdev
->dev_data
;
430 spin_lock(&card
->cli_queue_lock
);
431 skb
= skb_dequeue(&card
->cli_queue
[SOLOS_CHAN(atmdev
)]);
432 spin_unlock(&card
->cli_queue_lock
);
434 return sprintf(buf
, "No data.\n");
436 memcpy(buf
, skb
->data
, skb
->len
);
437 dev_dbg(&card
->dev
->dev
, "len: %d\n", skb
->len
);
443 static int send_command(struct solos_card
*card
, int dev
, const char *buf
, size_t size
)
446 struct pkt_hdr
*header
;
448 if (size
> (BUF_SIZE
- sizeof(*header
))) {
449 dev_dbg(&card
->dev
->dev
, "Command is too big. Dropping request\n");
452 skb
= alloc_skb(size
+ sizeof(*header
), GFP_ATOMIC
);
454 dev_warn(&card
->dev
->dev
, "Failed to allocate sk_buff in send_command()\n");
458 header
= (void *)skb_put(skb
, sizeof(*header
));
460 header
->size
= cpu_to_le16(size
);
461 header
->vpi
= cpu_to_le16(0);
462 header
->vci
= cpu_to_le16(0);
463 header
->type
= cpu_to_le16(PKT_COMMAND
);
465 memcpy(skb_put(skb
, size
), buf
, size
);
467 fpga_queue(card
, dev
, skb
, NULL
);
472 static ssize_t
console_store(struct device
*dev
, struct device_attribute
*attr
,
473 const char *buf
, size_t count
)
475 struct atm_dev
*atmdev
= container_of(dev
, struct atm_dev
, class_dev
);
476 struct solos_card
*card
= atmdev
->dev_data
;
479 err
= send_command(card
, SOLOS_CHAN(atmdev
), buf
, count
);
484 static DEVICE_ATTR(console
, 0644, console_show
, console_store
);
487 #define SOLOS_ATTR_RO(x) static DEVICE_ATTR(x, 0444, solos_param_show, NULL);
488 #define SOLOS_ATTR_RW(x) static DEVICE_ATTR(x, 0644, solos_param_show, solos_param_store);
490 #include "solos-attrlist.c"
495 #define SOLOS_ATTR_RO(x) &dev_attr_##x.attr,
496 #define SOLOS_ATTR_RW(x) &dev_attr_##x.attr,
498 static struct attribute
*solos_attrs
[] = {
499 #include "solos-attrlist.c"
503 static struct attribute_group solos_attr_group
= {
504 .attrs
= solos_attrs
,
505 .name
= "parameters",
508 static int flash_upgrade(struct solos_card
*card
, int chip
)
510 const struct firmware
*fw
;
518 fw_name
= "solos-FPGA.bin";
519 blocksize
= FPGA_BLOCK
;
521 fw_name
= "solos-Firmware.bin";
522 blocksize
= SOLOS_BLOCK
;
525 if (request_firmware(&fw
, fw_name
, &card
->dev
->dev
))
528 dev_info(&card
->dev
->dev
, "Flash upgrade starting\n");
530 numblocks
= fw
->size
/ blocksize
;
531 dev_info(&card
->dev
->dev
, "Firmware size: %zd\n", fw
->size
);
532 dev_info(&card
->dev
->dev
, "Number of blocks: %d\n", numblocks
);
534 dev_info(&card
->dev
->dev
, "Changing FPGA to Update mode\n");
535 iowrite32(1, card
->config_regs
+ FPGA_MODE
);
536 data32
= ioread32(card
->config_regs
+ FPGA_MODE
);
538 /* Set mode to Chip Erase */
539 dev_info(&card
->dev
->dev
, "Set FPGA Flash mode to %s Chip Erase\n",
540 chip
?"Solos":"FPGA");
541 iowrite32((chip
* 2), card
->config_regs
+ FLASH_MODE
);
544 iowrite32(1, card
->config_regs
+ WRITE_FLASH
);
545 wait_event(card
->fw_wq
, !ioread32(card
->config_regs
+ FLASH_BUSY
));
547 for (offset
= 0; offset
< fw
->size
; offset
+= blocksize
) {
550 /* Clear write flag */
551 iowrite32(0, card
->config_regs
+ WRITE_FLASH
);
553 /* Set mode to Block Write */
554 /* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
555 iowrite32(((chip
* 2) + 1), card
->config_regs
+ FLASH_MODE
);
557 /* Copy block to buffer, swapping each 16 bits */
558 for(i
= 0; i
< blocksize
; i
+= 4) {
559 uint32_t word
= swahb32p((uint32_t *)(fw
->data
+ offset
+ i
));
560 iowrite32(word
, RX_BUF(card
, 3) + i
);
563 /* Specify block number and then trigger flash write */
564 iowrite32(offset
/ blocksize
, card
->config_regs
+ FLASH_BLOCK
);
565 iowrite32(1, card
->config_regs
+ WRITE_FLASH
);
566 wait_event(card
->fw_wq
, !ioread32(card
->config_regs
+ FLASH_BUSY
));
569 release_firmware(fw
);
570 iowrite32(0, card
->config_regs
+ WRITE_FLASH
);
571 iowrite32(0, card
->config_regs
+ FPGA_MODE
);
572 iowrite32(0, card
->config_regs
+ FLASH_MODE
);
573 dev_info(&card
->dev
->dev
, "Returning FPGA to Data mode\n");
577 static irqreturn_t
solos_irq(int irq
, void *dev_id
)
579 struct solos_card
*card
= dev_id
;
582 iowrite32(0, card
->config_regs
+ IRQ_CLEAR
);
584 /* If we're up and running, just kick the tasklet to process TX/RX */
586 tasklet_schedule(&card
->tlet
);
588 wake_up(&card
->fw_wq
);
590 return IRQ_RETVAL(handled
);
593 void solos_bh(unsigned long card_arg
)
595 struct solos_card
*card
= (void *)card_arg
;
597 uint32_t rx_done
= 0;
601 * Since fpga_tx() is going to need to read the flags under its lock,
602 * it can return them to us so that we don't have to hit PCI MMIO
603 * again for the same information
605 card_flags
= fpga_tx(card
);
607 for (port
= 0; port
< card
->nr_ports
; port
++) {
608 if (card_flags
& (0x10 << port
)) {
609 struct pkt_hdr _hdr
, *header
;
614 if (card
->using_dma
) {
615 skb
= card
->rx_skb
[port
];
616 card
->rx_skb
[port
] = NULL
;
618 pci_unmap_single(card
->dev
, SKB_CB(skb
)->dma_addr
,
619 RX_DMA_SIZE
, PCI_DMA_FROMDEVICE
);
621 header
= (void *)skb
->data
;
622 size
= le16_to_cpu(header
->size
);
623 skb_put(skb
, size
+ sizeof(*header
));
624 skb_pull(skb
, sizeof(*header
));
628 rx_done
|= 0x10 << port
;
630 memcpy_fromio(header
, RX_BUF(card
, port
), sizeof(*header
));
632 size
= le16_to_cpu(header
->size
);
634 skb
= alloc_skb(size
+ 1, GFP_ATOMIC
);
637 dev_warn(&card
->dev
->dev
, "Failed to allocate sk_buff for RX\n");
641 memcpy_fromio(skb_put(skb
, size
),
642 RX_BUF(card
, port
) + sizeof(*header
),
646 dev_info(&card
->dev
->dev
, "Received: device %d\n", port
);
647 dev_info(&card
->dev
->dev
, "size: %d VPI: %d VCI: %d\n",
648 size
, le16_to_cpu(header
->vpi
),
649 le16_to_cpu(header
->vci
));
653 switch (le16_to_cpu(header
->type
)) {
655 vcc
= find_vcc(card
->atmdev
[port
], le16_to_cpu(header
->vpi
),
656 le16_to_cpu(header
->vci
));
659 dev_warn(&card
->dev
->dev
, "Received packet for unknown VCI.VPI %d.%d on port %d\n",
660 le16_to_cpu(header
->vci
), le16_to_cpu(header
->vpi
),
664 atm_charge(vcc
, skb
->truesize
);
666 atomic_inc(&vcc
->stats
->rx
);
670 if (process_status(card
, port
, skb
) &&
672 dev_warn(&card
->dev
->dev
, "Bad status packet of %d bytes on port %d:\n", skb
->len
, port
);
675 dev_kfree_skb_any(skb
);
679 default: /* FIXME: Not really, surely? */
680 if (process_command(card
, port
, skb
))
682 spin_lock(&card
->cli_queue_lock
);
683 if (skb_queue_len(&card
->cli_queue
[port
]) > 10) {
685 dev_warn(&card
->dev
->dev
, "Dropping console response on port %d\n",
687 dev_kfree_skb_any(skb
);
689 skb_queue_tail(&card
->cli_queue
[port
], skb
);
690 spin_unlock(&card
->cli_queue_lock
);
694 /* Allocate RX skbs for any ports which need them */
695 if (card
->using_dma
&& card
->atmdev
[port
] &&
696 !card
->rx_skb
[port
]) {
697 struct sk_buff
*skb
= alloc_skb(RX_DMA_SIZE
, GFP_ATOMIC
);
699 SKB_CB(skb
)->dma_addr
=
700 pci_map_single(card
->dev
, skb
->data
,
701 RX_DMA_SIZE
, PCI_DMA_FROMDEVICE
);
702 iowrite32(SKB_CB(skb
)->dma_addr
,
703 card
->config_regs
+ RX_DMA_ADDR(port
));
704 card
->rx_skb
[port
] = skb
;
707 dev_warn(&card
->dev
->dev
, "Failed to allocate RX skb");
709 /* We'll have to try again later */
710 tasklet_schedule(&card
->tlet
);
715 iowrite32(rx_done
, card
->config_regs
+ FLAGS_ADDR
);
720 static struct atm_vcc
*find_vcc(struct atm_dev
*dev
, short vpi
, int vci
)
722 struct hlist_head
*head
;
723 struct atm_vcc
*vcc
= NULL
;
724 struct hlist_node
*node
;
727 read_lock(&vcc_sklist_lock
);
728 head
= &vcc_hash
[vci
& (VCC_HTABLE_SIZE
-1)];
729 sk_for_each(s
, node
, head
) {
731 if (vcc
->dev
== dev
&& vcc
->vci
== vci
&&
732 vcc
->vpi
== vpi
&& vcc
->qos
.rxtp
.traffic_class
!= ATM_NONE
)
737 read_unlock(&vcc_sklist_lock
);
741 static int list_vccs(int vci
)
743 struct hlist_head
*head
;
745 struct hlist_node
*node
;
750 read_lock(&vcc_sklist_lock
);
752 head
= &vcc_hash
[vci
& (VCC_HTABLE_SIZE
-1)];
753 sk_for_each(s
, node
, head
) {
756 printk(KERN_DEBUG
"Device: %d Vpi: %d Vci: %d\n",
762 for(i
= 0; i
< VCC_HTABLE_SIZE
; i
++){
764 sk_for_each(s
, node
, head
) {
767 printk(KERN_DEBUG
"Device: %d Vpi: %d Vci: %d\n",
774 read_unlock(&vcc_sklist_lock
);
778 static void release_vccs(struct atm_dev
*dev
)
782 write_lock_irq(&vcc_sklist_lock
);
783 for (i
= 0; i
< VCC_HTABLE_SIZE
; i
++) {
784 struct hlist_head
*head
= &vcc_hash
[i
];
785 struct hlist_node
*node
, *tmp
;
789 sk_for_each_safe(s
, node
, tmp
, head
) {
791 if (vcc
->dev
== dev
) {
792 vcc_release_async(vcc
, -EPIPE
);
797 write_unlock_irq(&vcc_sklist_lock
);
801 static int popen(struct atm_vcc
*vcc
)
803 struct solos_card
*card
= vcc
->dev
->dev_data
;
805 struct pkt_hdr
*header
;
807 if (vcc
->qos
.aal
!= ATM_AAL5
) {
808 dev_warn(&card
->dev
->dev
, "Unsupported ATM type %d\n",
813 skb
= alloc_skb(sizeof(*header
), GFP_ATOMIC
);
814 if (!skb
&& net_ratelimit()) {
815 dev_warn(&card
->dev
->dev
, "Failed to allocate sk_buff in popen()\n");
818 header
= (void *)skb_put(skb
, sizeof(*header
));
820 header
->size
= cpu_to_le16(0);
821 header
->vpi
= cpu_to_le16(vcc
->vpi
);
822 header
->vci
= cpu_to_le16(vcc
->vci
);
823 header
->type
= cpu_to_le16(PKT_POPEN
);
825 fpga_queue(card
, SOLOS_CHAN(vcc
->dev
), skb
, NULL
);
827 set_bit(ATM_VF_ADDR
, &vcc
->flags
);
828 set_bit(ATM_VF_READY
, &vcc
->flags
);
835 static void pclose(struct atm_vcc
*vcc
)
837 struct solos_card
*card
= vcc
->dev
->dev_data
;
839 struct pkt_hdr
*header
;
841 skb
= alloc_skb(sizeof(*header
), GFP_ATOMIC
);
843 dev_warn(&card
->dev
->dev
, "Failed to allocate sk_buff in pclose()\n");
846 header
= (void *)skb_put(skb
, sizeof(*header
));
848 header
->size
= cpu_to_le16(0);
849 header
->vpi
= cpu_to_le16(vcc
->vpi
);
850 header
->vci
= cpu_to_le16(vcc
->vci
);
851 header
->type
= cpu_to_le16(PKT_PCLOSE
);
853 fpga_queue(card
, SOLOS_CHAN(vcc
->dev
), skb
, NULL
);
855 clear_bit(ATM_VF_ADDR
, &vcc
->flags
);
856 clear_bit(ATM_VF_READY
, &vcc
->flags
);
861 static int print_buffer(struct sk_buff
*buf
)
868 for (i
= 0; i
< len
; i
++){
870 sprintf(msg
, "%02X: ", i
);
872 sprintf(item
,"%02X ",*(buf
->data
+ i
));
877 printk(KERN_DEBUG
"%s", msg
);
883 printk(KERN_DEBUG
"%s", msg
);
885 printk(KERN_DEBUG
"\n");
890 static void fpga_queue(struct solos_card
*card
, int port
, struct sk_buff
*skb
,
896 SKB_CB(skb
)->vcc
= vcc
;
898 spin_lock_irqsave(&card
->tx_queue_lock
, flags
);
899 old_len
= skb_queue_len(&card
->tx_queue
[port
]);
900 skb_queue_tail(&card
->tx_queue
[port
], skb
);
902 card
->tx_mask
|= (1 << port
);
903 spin_unlock_irqrestore(&card
->tx_queue_lock
, flags
);
905 /* Theoretically we could just schedule the tasklet here, but
906 that introduces latency we don't want -- it's noticeable */
911 static uint32_t fpga_tx(struct solos_card
*card
)
913 uint32_t tx_pending
, card_flags
;
914 uint32_t tx_started
= 0;
920 spin_lock_irqsave(&card
->tx_lock
, flags
);
922 card_flags
= ioread32(card
->config_regs
+ FLAGS_ADDR
);
924 * The queue lock is required for _writing_ to tx_mask, but we're
925 * OK to read it here without locking. The only potential update
926 * that we could race with is in fpga_queue() where it sets a bit
927 * for a new port... but it's going to call this function again if
928 * it's doing that, anyway.
930 tx_pending
= card
->tx_mask
& ~card_flags
;
932 for (port
= 0; tx_pending
; tx_pending
>>= 1, port
++) {
933 if (tx_pending
& 1) {
934 struct sk_buff
*oldskb
= card
->tx_skb
[port
];
936 pci_unmap_single(card
->dev
, SKB_CB(oldskb
)->dma_addr
,
937 oldskb
->len
, PCI_DMA_TODEVICE
);
939 spin_lock(&card
->tx_queue_lock
);
940 skb
= skb_dequeue(&card
->tx_queue
[port
]);
942 card
->tx_mask
&= ~(1 << port
);
943 spin_unlock(&card
->tx_queue_lock
);
945 if (skb
&& !card
->using_dma
) {
946 memcpy_toio(TX_BUF(card
, port
), skb
->data
, skb
->len
);
947 tx_started
|= 1 << port
;
948 oldskb
= skb
; /* We're done with this skb already */
949 } else if (skb
&& card
->using_dma
) {
950 SKB_CB(skb
)->dma_addr
= pci_map_single(card
->dev
, skb
->data
,
951 skb
->len
, PCI_DMA_TODEVICE
);
952 iowrite32(SKB_CB(skb
)->dma_addr
,
953 card
->config_regs
+ TX_DMA_ADDR(port
));
959 /* Clean up and free oldskb now it's gone */
961 dev_info(&card
->dev
->dev
, "Transmitted: port %d\n",
963 print_buffer(oldskb
);
966 vcc
= SKB_CB(oldskb
)->vcc
;
969 atomic_inc(&vcc
->stats
->tx
);
970 solos_pop(vcc
, oldskb
);
972 dev_kfree_skb_irq(oldskb
);
976 /* For non-DMA TX, write the 'TX start' bit for all four ports simultaneously */
978 iowrite32(tx_started
, card
->config_regs
+ FLAGS_ADDR
);
980 spin_unlock_irqrestore(&card
->tx_lock
, flags
);
984 static int psend(struct atm_vcc
*vcc
, struct sk_buff
*skb
)
986 struct solos_card
*card
= vcc
->dev
->dev_data
;
987 struct pkt_hdr
*header
;
991 if (pktlen
> (BUF_SIZE
- sizeof(*header
))) {
992 dev_warn(&card
->dev
->dev
, "Length of PDU is too large. Dropping PDU.\n");
997 if (!skb_clone_writable(skb
, sizeof(*header
))) {
1001 if (skb_headroom(skb
) < sizeof(*header
))
1002 expand_by
= sizeof(*header
) - skb_headroom(skb
);
1004 ret
= pskb_expand_head(skb
, expand_by
, 0, GFP_ATOMIC
);
1006 dev_warn(&card
->dev
->dev
, "pskb_expand_head failed.\n");
1007 solos_pop(vcc
, skb
);
1012 header
= (void *)skb_push(skb
, sizeof(*header
));
1014 /* This does _not_ include the size of the header */
1015 header
->size
= cpu_to_le16(pktlen
);
1016 header
->vpi
= cpu_to_le16(vcc
->vpi
);
1017 header
->vci
= cpu_to_le16(vcc
->vci
);
1018 header
->type
= cpu_to_le16(PKT_DATA
);
1020 fpga_queue(card
, SOLOS_CHAN(vcc
->dev
), skb
, vcc
);
1025 static struct atmdev_ops fpga_ops
= {
1037 .owner
= THIS_MODULE
1040 static int fpga_probe(struct pci_dev
*dev
, const struct pci_device_id
*id
)
1044 uint8_t major_ver
, minor_ver
;
1046 struct solos_card
*card
;
1048 card
= kzalloc(sizeof(*card
), GFP_KERNEL
);
1053 init_waitqueue_head(&card
->fw_wq
);
1054 init_waitqueue_head(&card
->param_wq
);
1056 err
= pci_enable_device(dev
);
1058 dev_warn(&dev
->dev
, "Failed to enable PCI device\n");
1062 err
= pci_set_dma_mask(dev
, DMA_BIT_MASK(32));
1064 dev_warn(&dev
->dev
, "Failed to set 32-bit DMA mask\n");
1068 err
= pci_request_regions(dev
, "solos");
1070 dev_warn(&dev
->dev
, "Failed to request regions\n");
1074 card
->config_regs
= pci_iomap(dev
, 0, CONFIG_RAM_SIZE
);
1075 if (!card
->config_regs
) {
1076 dev_warn(&dev
->dev
, "Failed to ioremap config registers\n");
1077 goto out_release_regions
;
1079 card
->buffers
= pci_iomap(dev
, 1, DATA_RAM_SIZE
);
1080 if (!card
->buffers
) {
1081 dev_warn(&dev
->dev
, "Failed to ioremap data buffers\n");
1082 goto out_unmap_config
;
1086 iowrite32(1, card
->config_regs
+ FPGA_MODE
);
1087 data32
= ioread32(card
->config_regs
+ FPGA_MODE
);
1089 iowrite32(0, card
->config_regs
+ FPGA_MODE
);
1090 data32
= ioread32(card
->config_regs
+ FPGA_MODE
);
1093 data32
= ioread32(card
->config_regs
+ FPGA_VER
);
1094 fpga_ver
= (data32
& 0x0000FFFF);
1095 major_ver
= ((data32
& 0xFF000000) >> 24);
1096 minor_ver
= ((data32
& 0x00FF0000) >> 16);
1097 dev_info(&dev
->dev
, "Solos FPGA Version %d.%02d svn-%d\n",
1098 major_ver
, minor_ver
, fpga_ver
);
1100 if (0 && fpga_ver
> 27)
1101 card
->using_dma
= 1;
1103 /* Set RX empty flag for all ports */
1104 iowrite32(0xF0, card
->config_regs
+ FLAGS_ADDR
);
1107 data32
= ioread32(card
->config_regs
+ PORTS
);
1108 card
->nr_ports
= (data32
& 0x000000FF);
1110 pci_set_drvdata(dev
, card
);
1112 tasklet_init(&card
->tlet
, solos_bh
, (unsigned long)card
);
1113 spin_lock_init(&card
->tx_lock
);
1114 spin_lock_init(&card
->tx_queue_lock
);
1115 spin_lock_init(&card
->cli_queue_lock
);
1116 spin_lock_init(&card
->param_queue_lock
);
1117 INIT_LIST_HEAD(&card
->param_queue
);
1119 err
= request_irq(dev
->irq
, solos_irq
, IRQF_SHARED
,
1122 dev_dbg(&card
->dev
->dev
, "Failed to request interrupt IRQ: %d\n", dev
->irq
);
1123 goto out_unmap_both
;
1126 iowrite32(1, card
->config_regs
+ IRQ_EN_ADDR
);
1129 flash_upgrade(card
, 0);
1131 if (firmware_upgrade
)
1132 flash_upgrade(card
, 1);
1134 err
= atm_init(card
);
1141 iowrite32(0, card
->config_regs
+ IRQ_EN_ADDR
);
1142 free_irq(dev
->irq
, card
);
1143 tasklet_kill(&card
->tlet
);
1146 pci_set_drvdata(dev
, NULL
);
1147 pci_iounmap(dev
, card
->config_regs
);
1149 pci_iounmap(dev
, card
->buffers
);
1150 out_release_regions
:
1151 pci_release_regions(dev
);
1157 static int atm_init(struct solos_card
*card
)
1161 for (i
= 0; i
< card
->nr_ports
; i
++) {
1162 struct sk_buff
*skb
;
1163 struct pkt_hdr
*header
;
1165 skb_queue_head_init(&card
->tx_queue
[i
]);
1166 skb_queue_head_init(&card
->cli_queue
[i
]);
1168 card
->atmdev
[i
] = atm_dev_register("solos-pci", &fpga_ops
, -1, NULL
);
1169 if (!card
->atmdev
[i
]) {
1170 dev_err(&card
->dev
->dev
, "Could not register ATM device %d\n", i
);
1174 if (device_create_file(&card
->atmdev
[i
]->class_dev
, &dev_attr_console
))
1175 dev_err(&card
->dev
->dev
, "Could not register console for ATM device %d\n", i
);
1176 if (sysfs_create_group(&card
->atmdev
[i
]->class_dev
.kobj
, &solos_attr_group
))
1177 dev_err(&card
->dev
->dev
, "Could not register parameter group for ATM device %d\n", i
);
1179 dev_info(&card
->dev
->dev
, "Registered ATM device %d\n", card
->atmdev
[i
]->number
);
1181 card
->atmdev
[i
]->ci_range
.vpi_bits
= 8;
1182 card
->atmdev
[i
]->ci_range
.vci_bits
= 16;
1183 card
->atmdev
[i
]->dev_data
= card
;
1184 card
->atmdev
[i
]->phy_data
= (void *)(unsigned long)i
;
1185 card
->atmdev
[i
]->signal
= ATM_PHY_SIG_UNKNOWN
;
1187 skb
= alloc_skb(sizeof(*header
), GFP_ATOMIC
);
1189 dev_warn(&card
->dev
->dev
, "Failed to allocate sk_buff in atm_init()\n");
1193 header
= (void *)skb_put(skb
, sizeof(*header
));
1195 header
->size
= cpu_to_le16(0);
1196 header
->vpi
= cpu_to_le16(0);
1197 header
->vci
= cpu_to_le16(0);
1198 header
->type
= cpu_to_le16(PKT_STATUS
);
1200 fpga_queue(card
, i
, skb
, NULL
);
1205 static void atm_remove(struct solos_card
*card
)
1209 for (i
= 0; i
< card
->nr_ports
; i
++) {
1210 if (card
->atmdev
[i
]) {
1211 struct sk_buff
*skb
;
1213 dev_info(&card
->dev
->dev
, "Unregistering ATM device %d\n", card
->atmdev
[i
]->number
);
1215 sysfs_remove_group(&card
->atmdev
[i
]->class_dev
.kobj
, &solos_attr_group
);
1216 atm_dev_deregister(card
->atmdev
[i
]);
1218 skb
= card
->rx_skb
[i
];
1220 pci_unmap_single(card
->dev
, SKB_CB(skb
)->dma_addr
,
1221 RX_DMA_SIZE
, PCI_DMA_FROMDEVICE
);
1224 skb
= card
->tx_skb
[i
];
1226 pci_unmap_single(card
->dev
, SKB_CB(skb
)->dma_addr
,
1227 skb
->len
, PCI_DMA_TODEVICE
);
1230 while ((skb
= skb_dequeue(&card
->tx_queue
[i
])))
1237 static void fpga_remove(struct pci_dev
*dev
)
1239 struct solos_card
*card
= pci_get_drvdata(dev
);
1242 iowrite32(0, card
->config_regs
+ IRQ_EN_ADDR
);
1245 iowrite32(1, card
->config_regs
+ FPGA_MODE
);
1246 (void)ioread32(card
->config_regs
+ FPGA_MODE
);
1250 free_irq(dev
->irq
, card
);
1251 tasklet_kill(&card
->tlet
);
1253 /* Release device from reset */
1254 iowrite32(0, card
->config_regs
+ FPGA_MODE
);
1255 (void)ioread32(card
->config_regs
+ FPGA_MODE
);
1257 pci_iounmap(dev
, card
->buffers
);
1258 pci_iounmap(dev
, card
->config_regs
);
1260 pci_release_regions(dev
);
1261 pci_disable_device(dev
);
1263 pci_set_drvdata(dev
, NULL
);
1267 static struct pci_device_id fpga_pci_tbl
[] __devinitdata
= {
1268 { 0x10ee, 0x0300, PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0 },
1272 MODULE_DEVICE_TABLE(pci
,fpga_pci_tbl
);
1274 static struct pci_driver fpga_driver
= {
1276 .id_table
= fpga_pci_tbl
,
1277 .probe
= fpga_probe
,
1278 .remove
= fpga_remove
,
1282 static int __init
solos_pci_init(void)
1284 printk(KERN_INFO
"Solos PCI Driver Version %s\n", VERSION
);
1285 return pci_register_driver(&fpga_driver
);
1288 static void __exit
solos_pci_exit(void)
1290 pci_unregister_driver(&fpga_driver
);
1291 printk(KERN_INFO
"Solos PCI Driver %s Unloaded\n", VERSION
);
1294 module_init(solos_pci_init
);
1295 module_exit(solos_pci_exit
);