Linux 2.6.32.16
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / video / bw2.c
blobb0b147cb4cb3aae5a0090e38145f8b48d1b0e25b
1 /* bw2.c: BWTWO frame buffer driver
3 * Copyright (C) 2003, 2006 David S. Miller (davem@davemloft.net)
4 * Copyright (C) 1996,1998 Jakub Jelinek (jj@ultra.linux.cz)
5 * Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
6 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
8 * Driver layout based loosely on tgafb.c, see that file for credits.
9 */
11 #include <linux/module.h>
12 #include <linux/kernel.h>
13 #include <linux/errno.h>
14 #include <linux/string.h>
15 #include <linux/slab.h>
16 #include <linux/delay.h>
17 #include <linux/init.h>
18 #include <linux/fb.h>
19 #include <linux/mm.h>
20 #include <linux/of_device.h>
22 #include <asm/io.h>
23 #include <asm/fbio.h>
25 #include "sbuslib.h"
28 * Local functions.
31 static int bw2_blank(int, struct fb_info *);
33 static int bw2_mmap(struct fb_info *, struct vm_area_struct *);
34 static int bw2_ioctl(struct fb_info *, unsigned int, unsigned long);
37 * Frame buffer operations
40 static struct fb_ops bw2_ops = {
41 .owner = THIS_MODULE,
42 .fb_blank = bw2_blank,
43 .fb_fillrect = cfb_fillrect,
44 .fb_copyarea = cfb_copyarea,
45 .fb_imageblit = cfb_imageblit,
46 .fb_mmap = bw2_mmap,
47 .fb_ioctl = bw2_ioctl,
48 #ifdef CONFIG_COMPAT
49 .fb_compat_ioctl = sbusfb_compat_ioctl,
50 #endif
53 /* OBio addresses for the bwtwo registers */
54 #define BWTWO_REGISTER_OFFSET 0x400000
56 struct bt_regs {
57 u32 addr;
58 u32 color_map;
59 u32 control;
60 u32 cursor;
63 struct bw2_regs {
64 struct bt_regs cmap;
65 u8 control;
66 u8 status;
67 u8 cursor_start;
68 u8 cursor_end;
69 u8 h_blank_start;
70 u8 h_blank_end;
71 u8 h_sync_start;
72 u8 h_sync_end;
73 u8 comp_sync_end;
74 u8 v_blank_start_high;
75 u8 v_blank_start_low;
76 u8 v_blank_end;
77 u8 v_sync_start;
78 u8 v_sync_end;
79 u8 xfer_holdoff_start;
80 u8 xfer_holdoff_end;
83 /* Status Register Constants */
84 #define BWTWO_SR_RES_MASK 0x70
85 #define BWTWO_SR_1600_1280 0x50
86 #define BWTWO_SR_1152_900_76_A 0x40
87 #define BWTWO_SR_1152_900_76_B 0x60
88 #define BWTWO_SR_ID_MASK 0x0f
89 #define BWTWO_SR_ID_MONO 0x02
90 #define BWTWO_SR_ID_MONO_ECL 0x03
91 #define BWTWO_SR_ID_MSYNC 0x04
92 #define BWTWO_SR_ID_NOCONN 0x0a
94 /* Control Register Constants */
95 #define BWTWO_CTL_ENABLE_INTS 0x80
96 #define BWTWO_CTL_ENABLE_VIDEO 0x40
97 #define BWTWO_CTL_ENABLE_TIMING 0x20
98 #define BWTWO_CTL_ENABLE_CURCMP 0x10
99 #define BWTWO_CTL_XTAL_MASK 0x0C
100 #define BWTWO_CTL_DIVISOR_MASK 0x03
102 /* Status Register Constants */
103 #define BWTWO_STAT_PENDING_INT 0x80
104 #define BWTWO_STAT_MSENSE_MASK 0x70
105 #define BWTWO_STAT_ID_MASK 0x0f
107 struct bw2_par {
108 spinlock_t lock;
109 struct bw2_regs __iomem *regs;
111 u32 flags;
112 #define BW2_FLAG_BLANKED 0x00000001
114 unsigned long which_io;
118 * bw2_blank - Optional function. Blanks the display.
119 * @blank_mode: the blank mode we want.
120 * @info: frame buffer structure that represents a single frame buffer
122 static int
123 bw2_blank(int blank, struct fb_info *info)
125 struct bw2_par *par = (struct bw2_par *) info->par;
126 struct bw2_regs __iomem *regs = par->regs;
127 unsigned long flags;
128 u8 val;
130 spin_lock_irqsave(&par->lock, flags);
132 switch (blank) {
133 case FB_BLANK_UNBLANK: /* Unblanking */
134 val = sbus_readb(&regs->control);
135 val |= BWTWO_CTL_ENABLE_VIDEO;
136 sbus_writeb(val, &regs->control);
137 par->flags &= ~BW2_FLAG_BLANKED;
138 break;
140 case FB_BLANK_NORMAL: /* Normal blanking */
141 case FB_BLANK_VSYNC_SUSPEND: /* VESA blank (vsync off) */
142 case FB_BLANK_HSYNC_SUSPEND: /* VESA blank (hsync off) */
143 case FB_BLANK_POWERDOWN: /* Poweroff */
144 val = sbus_readb(&regs->control);
145 val &= ~BWTWO_CTL_ENABLE_VIDEO;
146 sbus_writeb(val, &regs->control);
147 par->flags |= BW2_FLAG_BLANKED;
148 break;
151 spin_unlock_irqrestore(&par->lock, flags);
153 return 0;
156 static struct sbus_mmap_map bw2_mmap_map[] = {
158 .size = SBUS_MMAP_FBSIZE(1)
160 { .size = 0 }
163 static int bw2_mmap(struct fb_info *info, struct vm_area_struct *vma)
165 struct bw2_par *par = (struct bw2_par *)info->par;
167 return sbusfb_mmap_helper(bw2_mmap_map,
168 info->fix.smem_start, info->fix.smem_len,
169 par->which_io,
170 vma);
173 static int bw2_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
175 return sbusfb_ioctl_helper(cmd, arg, info,
176 FBTYPE_SUN2BW, 1, info->fix.smem_len);
180 * Initialisation
183 static void __devinit bw2_init_fix(struct fb_info *info, int linebytes)
185 strlcpy(info->fix.id, "bwtwo", sizeof(info->fix.id));
187 info->fix.type = FB_TYPE_PACKED_PIXELS;
188 info->fix.visual = FB_VISUAL_MONO01;
190 info->fix.line_length = linebytes;
192 info->fix.accel = FB_ACCEL_SUN_BWTWO;
195 static u8 bw2regs_1600[] __devinitdata = {
196 0x14, 0x8b, 0x15, 0x28, 0x16, 0x03, 0x17, 0x13,
197 0x18, 0x7b, 0x19, 0x05, 0x1a, 0x34, 0x1b, 0x2e,
198 0x1c, 0x00, 0x1d, 0x0a, 0x1e, 0xff, 0x1f, 0x01,
199 0x10, 0x21, 0
202 static u8 bw2regs_ecl[] __devinitdata = {
203 0x14, 0x65, 0x15, 0x1e, 0x16, 0x04, 0x17, 0x0c,
204 0x18, 0x5e, 0x19, 0x03, 0x1a, 0xa7, 0x1b, 0x23,
205 0x1c, 0x00, 0x1d, 0x08, 0x1e, 0xff, 0x1f, 0x01,
206 0x10, 0x20, 0
209 static u8 bw2regs_analog[] __devinitdata = {
210 0x14, 0xbb, 0x15, 0x2b, 0x16, 0x03, 0x17, 0x13,
211 0x18, 0xb0, 0x19, 0x03, 0x1a, 0xa6, 0x1b, 0x22,
212 0x1c, 0x01, 0x1d, 0x05, 0x1e, 0xff, 0x1f, 0x01,
213 0x10, 0x20, 0
216 static u8 bw2regs_76hz[] __devinitdata = {
217 0x14, 0xb7, 0x15, 0x27, 0x16, 0x03, 0x17, 0x0f,
218 0x18, 0xae, 0x19, 0x03, 0x1a, 0xae, 0x1b, 0x2a,
219 0x1c, 0x01, 0x1d, 0x09, 0x1e, 0xff, 0x1f, 0x01,
220 0x10, 0x24, 0
223 static u8 bw2regs_66hz[] __devinitdata = {
224 0x14, 0xbb, 0x15, 0x2b, 0x16, 0x04, 0x17, 0x14,
225 0x18, 0xae, 0x19, 0x03, 0x1a, 0xa8, 0x1b, 0x24,
226 0x1c, 0x01, 0x1d, 0x05, 0x1e, 0xff, 0x1f, 0x01,
227 0x10, 0x20, 0
230 static int __devinit bw2_do_default_mode(struct bw2_par *par,
231 struct fb_info *info,
232 int *linebytes)
234 u8 status, mon;
235 u8 *p;
237 status = sbus_readb(&par->regs->status);
238 mon = status & BWTWO_SR_RES_MASK;
239 switch (status & BWTWO_SR_ID_MASK) {
240 case BWTWO_SR_ID_MONO_ECL:
241 if (mon == BWTWO_SR_1600_1280) {
242 p = bw2regs_1600;
243 info->var.xres = info->var.xres_virtual = 1600;
244 info->var.yres = info->var.yres_virtual = 1280;
245 *linebytes = 1600 / 8;
246 } else
247 p = bw2regs_ecl;
248 break;
250 case BWTWO_SR_ID_MONO:
251 p = bw2regs_analog;
252 break;
254 case BWTWO_SR_ID_MSYNC:
255 if (mon == BWTWO_SR_1152_900_76_A ||
256 mon == BWTWO_SR_1152_900_76_B)
257 p = bw2regs_76hz;
258 else
259 p = bw2regs_66hz;
260 break;
262 case BWTWO_SR_ID_NOCONN:
263 return 0;
265 default:
266 printk(KERN_ERR "bw2: can't handle SR %02x\n",
267 status);
268 return -EINVAL;
270 for ( ; *p; p += 2) {
271 u8 __iomem *regp = &((u8 __iomem *)par->regs)[p[0]];
272 sbus_writeb(p[1], regp);
274 return 0;
277 static int __devinit bw2_probe(struct of_device *op, const struct of_device_id *match)
279 struct device_node *dp = op->node;
280 struct fb_info *info;
281 struct bw2_par *par;
282 int linebytes, err;
284 info = framebuffer_alloc(sizeof(struct bw2_par), &op->dev);
286 err = -ENOMEM;
287 if (!info)
288 goto out_err;
289 par = info->par;
291 spin_lock_init(&par->lock);
293 info->fix.smem_start = op->resource[0].start;
294 par->which_io = op->resource[0].flags & IORESOURCE_BITS;
296 sbusfb_fill_var(&info->var, dp, 1);
297 linebytes = of_getintprop_default(dp, "linebytes",
298 info->var.xres);
300 info->var.red.length = info->var.green.length =
301 info->var.blue.length = info->var.bits_per_pixel;
302 info->var.red.offset = info->var.green.offset =
303 info->var.blue.offset = 0;
305 par->regs = of_ioremap(&op->resource[0], BWTWO_REGISTER_OFFSET,
306 sizeof(struct bw2_regs), "bw2 regs");
307 if (!par->regs)
308 goto out_release_fb;
310 if (!of_find_property(dp, "width", NULL)) {
311 err = bw2_do_default_mode(par, info, &linebytes);
312 if (err)
313 goto out_unmap_regs;
316 info->fix.smem_len = PAGE_ALIGN(linebytes * info->var.yres);
318 info->flags = FBINFO_DEFAULT;
319 info->fbops = &bw2_ops;
321 info->screen_base = of_ioremap(&op->resource[0], 0,
322 info->fix.smem_len, "bw2 ram");
323 if (!info->screen_base)
324 goto out_unmap_regs;
326 bw2_blank(FB_BLANK_UNBLANK, info);
328 bw2_init_fix(info, linebytes);
330 err = register_framebuffer(info);
331 if (err < 0)
332 goto out_unmap_screen;
334 dev_set_drvdata(&op->dev, info);
336 printk(KERN_INFO "%s: bwtwo at %lx:%lx\n",
337 dp->full_name, par->which_io, info->fix.smem_start);
339 return 0;
341 out_unmap_screen:
342 of_iounmap(&op->resource[0], info->screen_base, info->fix.smem_len);
344 out_unmap_regs:
345 of_iounmap(&op->resource[0], par->regs, sizeof(struct bw2_regs));
347 out_release_fb:
348 framebuffer_release(info);
350 out_err:
351 return err;
354 static int __devexit bw2_remove(struct of_device *op)
356 struct fb_info *info = dev_get_drvdata(&op->dev);
357 struct bw2_par *par = info->par;
359 unregister_framebuffer(info);
361 of_iounmap(&op->resource[0], par->regs, sizeof(struct bw2_regs));
362 of_iounmap(&op->resource[0], info->screen_base, info->fix.smem_len);
364 framebuffer_release(info);
366 dev_set_drvdata(&op->dev, NULL);
368 return 0;
371 static const struct of_device_id bw2_match[] = {
373 .name = "bwtwo",
377 MODULE_DEVICE_TABLE(of, bw2_match);
379 static struct of_platform_driver bw2_driver = {
380 .name = "bw2",
381 .match_table = bw2_match,
382 .probe = bw2_probe,
383 .remove = __devexit_p(bw2_remove),
386 static int __init bw2_init(void)
388 if (fb_get_options("bw2fb", NULL))
389 return -ENODEV;
391 return of_register_driver(&bw2_driver, &of_bus_type);
394 static void __exit bw2_exit(void)
396 of_unregister_driver(&bw2_driver);
399 module_init(bw2_init);
400 module_exit(bw2_exit);
402 MODULE_DESCRIPTION("framebuffer driver for BWTWO chipsets");
403 MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
404 MODULE_VERSION("2.0");
405 MODULE_LICENSE("GPL");