2 * Register definitions and functions for:
3 * Philips UCB1400 driver
6 * Author: Nicolas Pitre
7 * Created: September 25, 2006
8 * Copyright: MontaVista Software, Inc.
10 * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
11 * If something doesnt work and it worked before spliting, e-mail me,
12 * dont bother Nicolas please ;-)
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation.
18 * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
19 * covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has
20 * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
23 #ifndef _LINUX__UCB1400_H
24 #define _LINUX__UCB1400_H
26 #include <sound/ac97_codec.h>
27 #include <linux/mutex.h>
28 #include <linux/platform_device.h>
29 #include <linux/gpio.h>
32 * UCB1400 AC-link registers
35 #define UCB_IO_DATA 0x5a
36 #define UCB_IO_DIR 0x5c
37 #define UCB_IE_RIS 0x5e
38 #define UCB_IE_FAL 0x60
39 #define UCB_IE_STATUS 0x62
40 #define UCB_IE_CLEAR 0x62
41 #define UCB_IE_ADC (1 << 11)
42 #define UCB_IE_TSPX (1 << 12)
44 #define UCB_TS_CR 0x64
45 #define UCB_TS_CR_TSMX_POW (1 << 0)
46 #define UCB_TS_CR_TSPX_POW (1 << 1)
47 #define UCB_TS_CR_TSMY_POW (1 << 2)
48 #define UCB_TS_CR_TSPY_POW (1 << 3)
49 #define UCB_TS_CR_TSMX_GND (1 << 4)
50 #define UCB_TS_CR_TSPX_GND (1 << 5)
51 #define UCB_TS_CR_TSMY_GND (1 << 6)
52 #define UCB_TS_CR_TSPY_GND (1 << 7)
53 #define UCB_TS_CR_MODE_INT (0 << 8)
54 #define UCB_TS_CR_MODE_PRES (1 << 8)
55 #define UCB_TS_CR_MODE_POS (2 << 8)
56 #define UCB_TS_CR_BIAS_ENA (1 << 11)
57 #define UCB_TS_CR_TSPX_LOW (1 << 12)
58 #define UCB_TS_CR_TSMX_LOW (1 << 13)
60 #define UCB_ADC_CR 0x66
61 #define UCB_ADC_SYNC_ENA (1 << 0)
62 #define UCB_ADC_VREFBYP_CON (1 << 1)
63 #define UCB_ADC_INP_TSPX (0 << 2)
64 #define UCB_ADC_INP_TSMX (1 << 2)
65 #define UCB_ADC_INP_TSPY (2 << 2)
66 #define UCB_ADC_INP_TSMY (3 << 2)
67 #define UCB_ADC_INP_AD0 (4 << 2)
68 #define UCB_ADC_INP_AD1 (5 << 2)
69 #define UCB_ADC_INP_AD2 (6 << 2)
70 #define UCB_ADC_INP_AD3 (7 << 2)
71 #define UCB_ADC_EXT_REF (1 << 5)
72 #define UCB_ADC_START (1 << 7)
73 #define UCB_ADC_ENA (1 << 15)
75 #define UCB_ADC_DATA 0x68
76 #define UCB_ADC_DAT_VALID (1 << 15)
79 #define UCB_FCSR_AVE (1 << 12)
81 #define UCB_ADC_DAT_MASK 0x3ff
84 #define UCB_ID_1400 0x4304
86 struct ucb1400_gpio_data
{
88 int (*gpio_setup
)(struct device
*dev
, int ngpio
);
89 int (*gpio_teardown
)(struct device
*dev
, int ngpio
);
94 struct snd_ac97
*ac97
;
98 struct input_dev
*ts_idev
;
99 struct task_struct
*ts_task
;
101 wait_queue_head_t ts_wait
;
102 unsigned int ts_restart
:1;
104 unsigned int irq_pending
; /* not bit field shared */
105 struct snd_ac97
*ac97
;
109 struct platform_device
*ucb1400_ts
;
110 struct platform_device
*ucb1400_gpio
;
113 static inline u16
ucb1400_reg_read(struct snd_ac97
*ac97
, u16 reg
)
115 return ac97
->bus
->ops
->read(ac97
, reg
);
118 static inline void ucb1400_reg_write(struct snd_ac97
*ac97
, u16 reg
, u16 val
)
120 ac97
->bus
->ops
->write(ac97
, reg
, val
);
123 static inline u16
ucb1400_gpio_get_value(struct snd_ac97
*ac97
, u16 gpio
)
125 return ucb1400_reg_read(ac97
, UCB_IO_DATA
) & (1 << gpio
);
128 static inline void ucb1400_gpio_set_value(struct snd_ac97
*ac97
, u16 gpio
,
131 ucb1400_reg_write(ac97
, UCB_IO_DATA
, val
?
132 ucb1400_reg_read(ac97
, UCB_IO_DATA
) | (1 << gpio
) :
133 ucb1400_reg_read(ac97
, UCB_IO_DATA
) & ~(1 << gpio
));
136 static inline u16
ucb1400_gpio_get_direction(struct snd_ac97
*ac97
, u16 gpio
)
138 return ucb1400_reg_read(ac97
, UCB_IO_DIR
) & (1 << gpio
);
141 static inline void ucb1400_gpio_set_direction(struct snd_ac97
*ac97
, u16 gpio
,
144 ucb1400_reg_write(ac97
, UCB_IO_DIR
, dir
?
145 ucb1400_reg_read(ac97
, UCB_IO_DIR
) | (1 << gpio
) :
146 ucb1400_reg_read(ac97
, UCB_IO_DIR
) & ~(1 << gpio
));
149 static inline void ucb1400_adc_enable(struct snd_ac97
*ac97
)
151 ucb1400_reg_write(ac97
, UCB_ADC_CR
, UCB_ADC_ENA
);
154 static inline void ucb1400_adc_disable(struct snd_ac97
*ac97
)
156 ucb1400_reg_write(ac97
, UCB_ADC_CR
, 0);
160 unsigned int ucb1400_adc_read(struct snd_ac97
*ac97
, u16 adc_channel
,
163 #ifdef CONFIG_GPIO_UCB1400
164 void __init
ucb1400_gpio_set_data(struct ucb1400_gpio_data
*data
);
166 static inline void ucb1400_gpio_set_data(struct ucb1400_gpio_data
*data
) {}