[PATCH] convert signal handling of NODEFER to act like other Unix boxes.

[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / cris / arch-v32 / kernel / signal.c

/*
 * Copyright (C) 2003, Axis Communications AB.
 */

#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/syscalls.h>
#include <linux/vmalloc.h>

#include <asm/io.h>
#include <asm/processor.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/arch/ptrace.h>
#include <asm/arch/hwregs/cpu_vect.h>

extern unsigned long cris_signal_return_page;

/* Flag to check if a signal is blockable. */
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))

/*
 * A syscall in CRIS is really a "break 13" instruction, which is 2
 * bytes. The registers is manipulated so upon return the instruction
 * will be executed again.
 *
 * This relies on that PC points to the instruction after the break call.
 */
#define RESTART_CRIS_SYS(regs) regs->r10 = regs->orig_r10; regs->erp -= 2;

/* Signal frames. */
struct signal_frame {
        struct sigcontext sc;
        unsigned long extramask[_NSIG_WORDS - 1];
        unsigned char retcode[8];       /* Trampoline code. */
};

struct rt_signal_frame {
        struct siginfo *pinfo;
        void *puc;
        struct siginfo info;
        struct ucontext uc;
        unsigned char retcode[8];       /* Trampoline code. */
};

int do_signal(int restart, sigset_t *oldset, struct pt_regs *regs);
void keep_debug_flags(unsigned long oldccs, unsigned long oldspc,
                      struct pt_regs *regs);
/*
 * Swap in the new signal mask, and wait for a signal. Define some
 * dummy arguments to be able to reach the regs argument.
 */
int
sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof,
               long srp, struct pt_regs *regs)
{
        sigset_t saveset;

        mask &= _BLOCKABLE;

        spin_lock_irq(&current->sighand->siglock);

        saveset = current->blocked;

        siginitset(&current->blocked, mask);

        recalc_sigpending();
        spin_unlock_irq(&current->sighand->siglock);

        regs->r10 = -EINTR;

        while (1) {
                current->state = TASK_INTERRUPTIBLE;
                schedule();

                if (do_signal(0, &saveset, regs)) {
                        /*
                         * This point is reached twice: once to call
                         * the signal handler, then again to return
                         * from the sigsuspend system call. When
                         * calling the signal handler, R10 hold the
                         * signal number as set by do_signal(). The
                         * sigsuspend  call will always return with
                         * the restored value above; -EINTR.
                         */
                        return regs->r10;
                }
        }
}

/* Define some dummy arguments to be able to reach the regs argument. */
int
sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13,
                  long mof, long srp, struct pt_regs *regs)
{
        sigset_t saveset;
        sigset_t newset;

        if (sigsetsize != sizeof(sigset_t))
                return -EINVAL;

        if (copy_from_user(&newset, unewset, sizeof(newset)))
                return -EFAULT;

        sigdelsetmask(&newset, ~_BLOCKABLE);
        spin_lock_irq(&current->sighand->siglock);

        saveset = current->blocked;
        current->blocked = newset;

        recalc_sigpending();
        spin_unlock_irq(&current->sighand->siglock);

        regs->r10 = -EINTR;

        while (1) {
                current->state = TASK_INTERRUPTIBLE;
                schedule();

                if (do_signal(0, &saveset, regs)) {
                        /* See comment in function above. */
                        return regs->r10;
                }
        }
}

int
sys_sigaction(int signal, const struct old_sigaction *act,
              struct old_sigaction *oact)
{
        int retval;
        struct k_sigaction newk;
        struct k_sigaction oldk;

        if (act) {
                old_sigset_t mask;

                if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
                    __get_user(newk.sa.sa_handler, &act->sa_handler) ||
                    __get_user(newk.sa.sa_restorer, &act->sa_restorer))
                        return -EFAULT;

                __get_user(newk.sa.sa_flags, &act->sa_flags);
                __get_user(mask, &act->sa_mask);
                siginitset(&newk.sa.sa_mask, mask);
        }

        retval = do_sigaction(signal, act ? &newk : NULL, oact ? &oldk : NULL);

        if (!retval && oact) {
                if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
                    __put_user(oldk.sa.sa_handler, &oact->sa_handler) ||
                    __put_user(oldk.sa.sa_restorer, &oact->sa_restorer))
                        return -EFAULT;

                __put_user(oldk.sa.sa_flags, &oact->sa_flags);
                __put_user(oldk.sa.sa_mask.sig[0], &oact->sa_mask);
        }

        return retval;
}

int
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
{
        return do_sigaltstack(uss, uoss, rdusp());
}

static int
restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
{
        unsigned int err = 0;
        unsigned long old_usp;

        /* Always make any pending restarted system calls return -EINTR */
        current_thread_info()->restart_block.fn = do_no_restart_syscall;

        /*
         * Restore the registers from &sc->regs. sc is already checked
         * for VERIFY_READ since the signal_frame was previously
         * checked in sys_sigreturn().
         */
        if (__copy_from_user(regs, sc, sizeof(struct pt_regs)))
                goto badframe;

        /* Make that the user-mode flag is set. */
        regs->ccs |= (1 << (U_CCS_BITNR + CCS_SHIFT));

        /* Restore the old USP. */
        err |= __get_user(old_usp, &sc->usp);
        wrusp(old_usp);

        return err;

badframe:
        return 1;
}

/* Define some dummy arguments to be able to reach the regs argument. */
asmlinkage int
sys_sigreturn(long r10, long r11, long r12, long r13, long mof, long srp,
              struct pt_regs *regs)
{
        sigset_t set;
        struct signal_frame __user *frame;
        unsigned long oldspc = regs->spc;
        unsigned long oldccs = regs->ccs;

        frame = (struct signal_frame *) rdusp();

        /*
         * Since the signal is stacked on a dword boundary, the frame
         * should be dword aligned here as well. It it's not, then the
         * user is trying some funny business.
         */
        if (((long)frame) & 3)
                goto badframe;

        if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
                goto badframe;

        if (__get_user(set.sig[0], &frame->sc.oldmask) ||
            (_NSIG_WORDS > 1 && __copy_from_user(&set.sig[1],
                                                 frame->extramask,
                                                 sizeof(frame->extramask))))
                goto badframe;

        sigdelsetmask(&set, ~_BLOCKABLE);
        spin_lock_irq(&current->sighand->siglock);

        current->blocked = set;

        recalc_sigpending();
        spin_unlock_irq(&current->sighand->siglock);

        if (restore_sigcontext(regs, &frame->sc))
                goto badframe;

        keep_debug_flags(oldccs, oldspc, regs);

        return regs->r10;

badframe:
        force_sig(SIGSEGV, current);
        return 0;
}

/* Define some dummy variables to be able to reach the regs argument. */
asmlinkage int
sys_rt_sigreturn(long r10, long r11, long r12, long r13, long mof, long srp,
                 struct pt_regs *regs)
{
        sigset_t set;
        struct rt_signal_frame __user *frame;
        unsigned long oldspc = regs->spc;
        unsigned long oldccs = regs->ccs;

        frame = (struct rt_signal_frame *) rdusp();

        /*
         * Since the signal is stacked on a dword boundary, the frame
         * should be dword aligned here as well. It it's not, then the
         * user is trying some funny business.
         */
        if (((long)frame) & 3)
                goto badframe;

        if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
                goto badframe;

        if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
                goto badframe;

        sigdelsetmask(&set, ~_BLOCKABLE);
        spin_lock_irq(&current->sighand->siglock);

        current->blocked = set;

        recalc_sigpending();
        spin_unlock_irq(&current->sighand->siglock);

        if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
                goto badframe;

        if (do_sigaltstack(&frame->uc.uc_stack, NULL, rdusp()) == -EFAULT)
                goto badframe;

        keep_debug_flags(oldccs, oldspc, regs);

        return regs->r10;

badframe:
        force_sig(SIGSEGV, current);
        return 0;
}

/* Setup a signal frame. */
static int
setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
                 unsigned long mask)
{
        int err;
        unsigned long usp;

        err = 0;
        usp = rdusp();

        /*
         * Copy the registers. They are located first in sc, so it's
         * possible to use sc directly.
         */
        err |= __copy_to_user(sc, regs, sizeof(struct pt_regs));

        err |= __put_user(mask, &sc->oldmask);
        err |= __put_user(usp, &sc->usp);

        return err;
}

/* Figure out where to put the new signal frame - usually on the stack. */
static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
{
        unsigned long sp;

        sp = rdusp();

        /* This is the X/Open sanctioned signal stack switching. */
        if (ka->sa.sa_flags & SA_ONSTACK) {
                if (!on_sig_stack(sp))
                        sp = current->sas_ss_sp + current->sas_ss_size;
        }

        /* Make sure the frame is dword-aligned. */
        sp &= ~3;

        return (void __user *)(sp - frame_size);
}

/* Grab and setup a signal frame.
 *
 * Basically a lot of state-info is stacked, and arranged for the
 * user-mode program to return to the kernel using either a trampiline
 * which performs the syscall sigreturn(), or a provided user-mode
 * trampoline.
  */
static void
setup_frame(int sig, struct k_sigaction *ka,  sigset_t *set,
            struct pt_regs * regs)
{
        int err;
        unsigned long return_ip;
        struct signal_frame __user *frame;

        err = 0;
        frame = get_sigframe(ka, regs, sizeof(*frame));

        if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
                goto give_sigsegv;

        err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);

        if (err)
                goto give_sigsegv;

        if (_NSIG_WORDS > 1) {
                err |= __copy_to_user(frame->extramask, &set->sig[1],
                                      sizeof(frame->extramask));
        }

        if (err)
                goto give_sigsegv;

        /*
         * Set up to return from user-space. If provided, use a stub
         * already located in user-space.
         */
        if (ka->sa.sa_flags & SA_RESTORER) {
                return_ip = (unsigned long)ka->sa.sa_restorer;
        } else {
                /* Trampoline - the desired return ip is in the signal return page. */
                return_ip = cris_signal_return_page;

                /*
                 * This is movu.w __NR_sigreturn, r9; break 13;
                 *
                 * WE DO NOT USE IT ANY MORE! It's only left here for historical
                 * reasons and because gdb uses it as a signature to notice
                 * signal handler stack frames.
                 */
                err |= __put_user(0x9c5f,         (short __user*)(frame->retcode+0));
                err |= __put_user(__NR_sigreturn, (short __user*)(frame->retcode+2));
                err |= __put_user(0xe93d,         (short __user*)(frame->retcode+4));
        }

        if (err)
                goto give_sigsegv;

        /*
         * Set up registers for signal handler.
         *
         * Where the code enters now.
         * Where the code enter later.
         * First argument, signo.
         */
        regs->erp = (unsigned long) ka->sa.sa_handler;
        regs->srp = return_ip;
        regs->r10 = sig;

        /* Actually move the USP to reflect the stacked frame. */
        wrusp((unsigned long)frame);

        return;

give_sigsegv:
        if (sig == SIGSEGV)
                ka->sa.sa_handler = SIG_DFL;

        force_sig(SIGSEGV, current);
}

static void
setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
               sigset_t *set, struct pt_regs * regs)
{
        int err;
        unsigned long return_ip;
        struct rt_signal_frame __user *frame;

        err = 0;
        frame = get_sigframe(ka, regs, sizeof(*frame));

        if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
                goto give_sigsegv;

        /* TODO: what is the current->exec_domain stuff and invmap ? */

        err |= __put_user(&frame->info, &frame->pinfo);
        err |= __put_user(&frame->uc, &frame->puc);
        err |= copy_siginfo_to_user(&frame->info, info);

        if (err)
                goto give_sigsegv;

        /* Clear all the bits of the ucontext we don't use.  */
        err |= __clear_user(&frame->uc, offsetof(struct ucontext, uc_mcontext));
        err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
        err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));

        if (err)
                goto give_sigsegv;

        /*
         * Set up to return from user-space. If provided, use a stub
         * already located in user-space.
         */
        if (ka->sa.sa_flags & SA_RESTORER) {
                return_ip = (unsigned long) ka->sa.sa_restorer;
        } else {
                /* Trampoline - the desired return ip is in the signal return page. */
                return_ip = cris_signal_return_page + 6;

                /*
                 * This is movu.w __NR_rt_sigreturn, r9; break 13;
                 *
                 * WE DO NOT USE IT ANY MORE! It's only left here for historical
                 * reasons and because gdb uses it as a signature to notice
                 * signal handler stack frames.
                 */
                err |= __put_user(0x9c5f, (short __user*)(frame->retcode+0));

                err |= __put_user(__NR_rt_sigreturn,
                                  (short __user*)(frame->retcode+2));

                err |= __put_user(0xe93d, (short __user*)(frame->retcode+4));
        }

        if (err)
                goto give_sigsegv;

        /*
         * Set up registers for signal handler.
         *
         * Where the code enters now.
         * Where the code enters later.
         * First argument is signo.
         * Second argument is (siginfo_t *).
         * Third argument is unused.
         */
        regs->erp = (unsigned long) ka->sa.sa_handler;
        regs->srp = return_ip;
        regs->r10 = sig;
        regs->r11 = (unsigned long) &frame->info;
        regs->r12 = 0;

        /* Actually move the usp to reflect the stacked frame. */
        wrusp((unsigned long)frame);

        return;

give_sigsegv:
        if (sig == SIGSEGV)
                ka->sa.sa_handler = SIG_DFL;

        force_sig(SIGSEGV, current);
}

/* Invoke a singal handler to, well, handle the signal. */
extern inline void
handle_signal(int canrestart, unsigned long sig,
              siginfo_t *info, struct k_sigaction *ka,
              sigset_t *oldset, struct pt_regs * regs)
{
        /* Check if this got called from a system call. */
        if (canrestart) {
                /* If so, check system call restarting. */
                switch (regs->r10) {
                        case -ERESTART_RESTARTBLOCK:
                        case -ERESTARTNOHAND:
                                /*
                                 * This means that the syscall should
                                 * only be restarted if there was no
                                 * handler for the signal, and since
                                 * this point isn't reached unless
                                 * there is a handler, there's no need
                                 * to restart.
                                 */
                                regs->r10 = -EINTR;
                                break;

                        case -ERESTARTSYS:
                                /*
                                 * This means restart the syscall if
                                 * there is no handler, or the handler
                                 * was registered with SA_RESTART.
                                 */
                                if (!(ka->sa.sa_flags & SA_RESTART)) {
                                        regs->r10 = -EINTR;
                                        break;
                                }

                                /* Fall through. */

                        case -ERESTARTNOINTR:
                                /*
                                 * This means that the syscall should
                                 * be called again after the signal
                                 * handler returns.
                                 */
                                RESTART_CRIS_SYS(regs);
                                break;
                }
        }

        /* Set up the stack frame. */
        if (ka->sa.sa_flags & SA_SIGINFO)
                setup_rt_frame(sig, ka, info, oldset, regs);
        else
                setup_frame(sig, ka, oldset, regs);

        if (ka->sa.sa_flags & SA_ONESHOT)
                ka->sa.sa_handler = SIG_DFL;

        spin_lock_irq(&current->sighand->siglock);
        sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
        if (!(ka->sa.sa_flags & SA_NODEFER))
                sigaddset(&current->blocked,sig);
        recalc_sigpending();
        spin_unlock_irq(&current->sighand->siglock);
}

/*
 * Note that 'init' is a special process: it doesn't get signals it doesn't
 * want to handle. Thus you cannot kill init even with a SIGKILL even by
 * mistake.
 *
 * Also note that the regs structure given here as an argument, is the latest
 * pushed pt_regs. It may or may not be the same as the first pushed registers
 * when the initial usermode->kernelmode transition took place. Therefore
 * we can use user_mode(regs) to see if we came directly from kernel or user
 * mode below.
 */
int
do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
{
        int signr;
        siginfo_t info;
        struct k_sigaction ka;

        /*
         * The common case should go fast, which is why this point is
         * reached from kernel-mode. If that's the case, just return
         * without doing anything.
         */
        if (!user_mode(regs))
                return 1;

        if (!oldset)
                oldset = &current->blocked;

        signr = get_signal_to_deliver(&info, &ka, regs, NULL);

        if (signr > 0) {
                /* Deliver the signal. */
                handle_signal(canrestart, signr, &info, &ka, oldset, regs);
                return 1;
        }

        /* Got here from a system call? */
        if (canrestart) {
                /* Restart the system call - no handlers present. */
                if (regs->r10 == -ERESTARTNOHAND ||
                    regs->r10 == -ERESTARTSYS ||
                    regs->r10 == -ERESTARTNOINTR) {
                        RESTART_CRIS_SYS(regs);
                }

                if (regs->r10 == -ERESTART_RESTARTBLOCK){
                        regs->r10 = __NR_restart_syscall;
                        regs->erp -= 2;
                }
        }

        return 0;
}

asmlinkage void
ugdb_trap_user(struct thread_info *ti, int sig)
{
        if (((user_regs(ti)->exs & 0xff00) >> 8) != SINGLE_STEP_INTR_VECT) {
                /* Zero single-step PC if the reason we stopped wasn't a single
                   step exception. This is to avoid relying on it when it isn't
                   reliable. */
                user_regs(ti)->spc = 0;
        }
        /* FIXME: Filter out false h/w breakpoint hits (i.e. EDA
           not withing any configured h/w breakpoint range). Synchronize with
           what already exists for kernel debugging.  */
        if (((user_regs(ti)->exs & 0xff00) >> 8) == BREAK_8_INTR_VECT) {
                /* Break 8: subtract 2 from ERP unless in a delay slot. */
                if (!(user_regs(ti)->erp & 0x1))
                        user_regs(ti)->erp -= 2;
        }
        sys_kill(ti->task->pid, sig);
}

void
keep_debug_flags(unsigned long oldccs, unsigned long oldspc,
                 struct pt_regs *regs)
{
        if (oldccs & (1 << Q_CCS_BITNR)) {
                /* Pending single step due to single-stepping the break 13
                   in the signal trampoline: keep the Q flag. */
                regs->ccs |= (1 << Q_CCS_BITNR);
                /* S flag should be set - complain if it's not. */
                if (!(oldccs & (1 << (S_CCS_BITNR + CCS_SHIFT)))) {
                        printk("Q flag but no S flag?");
                }
                regs->ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT));
                /* Assume the SPC is valid and interesting. */
                regs->spc = oldspc;

        } else if (oldccs & (1 << (S_CCS_BITNR + CCS_SHIFT))) {
                /* If a h/w bp was set in the signal handler we need
                   to keep the S flag. */
                regs->ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT));
                /* Don't keep the old SPC though; if we got here due to
                   a single-step, the Q flag should have been set. */
        } else if (regs->spc) {
                /* If we were single-stepping *before* the signal was taken,
                   we don't want to restore that state now, because GDB will
                   have forgotten all about it. */
                regs->spc = 0;
                regs->ccs &= ~(1 << (S_CCS_BITNR + CCS_SHIFT));
        }
}

/* Set up the trampolines on the signal return page. */
int __init
cris_init_signal(void)
{
        u16* data = (u16*)kmalloc(PAGE_SIZE, GFP_KERNEL);

        /* This is movu.w __NR_sigreturn, r9; break 13; */
        data[0] = 0x9c5f;
        data[1] = __NR_sigreturn;
        data[2] = 0xe93d;
        /* This is movu.w __NR_rt_sigreturn, r9; break 13; */
        data[3] = 0x9c5f;
        data[4] = __NR_rt_sigreturn;
        data[5] = 0xe93d;

        /* Map to userspace with appropriate permissions (no write access...) */
        cris_signal_return_page = (unsigned long)
          __ioremap_prot(virt_to_phys(data), PAGE_SIZE, PAGE_SIGNAL_TRAMPOLINE);

        return 0;
}

__initcall(cris_init_signal);