offb: Fix bug in calculating requested vram size
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / pcmcia / sa11xx_base.c
blob0c62fe31a40e20ead5c0709757f177c738376574
1 /*======================================================================
3 Device driver for the PCMCIA control functionality of StrongARM
4 SA-1100 microprocessors.
6 The contents of this file are subject to the Mozilla Public
7 License Version 1.1 (the "License"); you may not use this file
8 except in compliance with the License. You may obtain a copy of
9 the License at http://www.mozilla.org/MPL/
11 Software distributed under the License is distributed on an "AS
12 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
13 implied. See the License for the specific language governing
14 rights and limitations under the License.
16 The initial developer of the original code is John G. Dorsey
17 <john+@cs.cmu.edu>. Portions created by John G. Dorsey are
18 Copyright (C) 1999 John G. Dorsey. All Rights Reserved.
20 Alternatively, the contents of this file may be used under the
21 terms of the GNU Public License version 2 (the "GPL"), in which
22 case the provisions of the GPL are applicable instead of the
23 above. If you wish to allow the use of your version of this file
24 only under the terms of the GPL and not to allow others to use
25 your version of this file under the MPL, indicate your decision
26 by deleting the provisions above and replace them with the notice
27 and other provisions required by the GPL. If you do not delete
28 the provisions above, a recipient may use your version of this
29 file under either the MPL or the GPL.
31 ======================================================================*/
33 #include <linux/module.h>
34 #include <linux/init.h>
35 #include <linux/cpufreq.h>
36 #include <linux/ioport.h>
37 #include <linux/kernel.h>
38 #include <linux/spinlock.h>
39 #include <linux/io.h>
40 #include <linux/slab.h>
42 #include <mach/hardware.h>
43 #include <asm/irq.h>
44 #include <asm/system.h>
46 #include "soc_common.h"
47 #include "sa11xx_base.h"
51 * sa1100_pcmcia_default_mecr_timing
52 * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
54 * Calculate MECR clock wait states for given CPU clock
55 * speed and command wait state. This function can be over-
56 * written by a board specific version.
58 * The default is to simply calculate the BS values as specified in
59 * the INTEL SA1100 development manual
60 * "Expansion Memory (PCMCIA) Configuration Register (MECR)"
61 * that's section 10.2.5 in _my_ version of the manual ;)
63 static unsigned int
64 sa1100_pcmcia_default_mecr_timing(struct soc_pcmcia_socket *skt,
65 unsigned int cpu_speed,
66 unsigned int cmd_time)
68 return sa1100_pcmcia_mecr_bs(cmd_time, cpu_speed);
71 /* sa1100_pcmcia_set_mecr()
72 * ^^^^^^^^^^^^^^^^^^^^^^^^
74 * set MECR value for socket <sock> based on this sockets
75 * io, mem and attribute space access speed.
76 * Call board specific BS value calculation to allow boards
77 * to tweak the BS values.
79 static int
80 sa1100_pcmcia_set_mecr(struct soc_pcmcia_socket *skt, unsigned int cpu_clock)
82 struct soc_pcmcia_timing timing;
83 u32 mecr, old_mecr;
84 unsigned long flags;
85 unsigned int bs_io, bs_mem, bs_attr;
87 soc_common_pcmcia_get_timing(skt, &timing);
89 bs_io = skt->ops->get_timing(skt, cpu_clock, timing.io);
90 bs_mem = skt->ops->get_timing(skt, cpu_clock, timing.mem);
91 bs_attr = skt->ops->get_timing(skt, cpu_clock, timing.attr);
93 local_irq_save(flags);
95 old_mecr = mecr = MECR;
96 MECR_FAST_SET(mecr, skt->nr, 0);
97 MECR_BSIO_SET(mecr, skt->nr, bs_io);
98 MECR_BSA_SET(mecr, skt->nr, bs_attr);
99 MECR_BSM_SET(mecr, skt->nr, bs_mem);
100 if (old_mecr != mecr)
101 MECR = mecr;
103 local_irq_restore(flags);
105 debug(skt, 2, "FAST %X BSM %X BSA %X BSIO %X\n",
106 MECR_FAST_GET(mecr, skt->nr),
107 MECR_BSM_GET(mecr, skt->nr), MECR_BSA_GET(mecr, skt->nr),
108 MECR_BSIO_GET(mecr, skt->nr));
110 return 0;
113 #ifdef CONFIG_CPU_FREQ
114 static int
115 sa1100_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
116 unsigned long val,
117 struct cpufreq_freqs *freqs)
119 switch (val) {
120 case CPUFREQ_PRECHANGE:
121 if (freqs->new > freqs->old)
122 sa1100_pcmcia_set_mecr(skt, freqs->new);
123 break;
125 case CPUFREQ_POSTCHANGE:
126 if (freqs->new < freqs->old)
127 sa1100_pcmcia_set_mecr(skt, freqs->new);
128 break;
129 case CPUFREQ_RESUMECHANGE:
130 sa1100_pcmcia_set_mecr(skt, freqs->new);
131 break;
134 return 0;
137 #endif
139 static int
140 sa1100_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
142 return sa1100_pcmcia_set_mecr(skt, cpufreq_get(0));
145 static int
146 sa1100_pcmcia_show_timing(struct soc_pcmcia_socket *skt, char *buf)
148 struct soc_pcmcia_timing timing;
149 unsigned int clock = cpufreq_get(0);
150 unsigned long mecr = MECR;
151 char *p = buf;
153 soc_common_pcmcia_get_timing(skt, &timing);
155 p+=sprintf(p, "I/O : %u (%u)\n", timing.io,
156 sa1100_pcmcia_cmd_time(clock, MECR_BSIO_GET(mecr, skt->nr)));
158 p+=sprintf(p, "attribute: %u (%u)\n", timing.attr,
159 sa1100_pcmcia_cmd_time(clock, MECR_BSA_GET(mecr, skt->nr)));
161 p+=sprintf(p, "common : %u (%u)\n", timing.mem,
162 sa1100_pcmcia_cmd_time(clock, MECR_BSM_GET(mecr, skt->nr)));
164 return p - buf;
167 static const char *skt_names[] = {
168 "PCMCIA socket 0",
169 "PCMCIA socket 1",
172 #define SKT_DEV_INFO_SIZE(n) \
173 (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
175 int sa11xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt)
177 skt->res_skt.start = _PCMCIA(skt->nr);
178 skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
179 skt->res_skt.name = skt_names[skt->nr];
180 skt->res_skt.flags = IORESOURCE_MEM;
182 skt->res_io.start = _PCMCIAIO(skt->nr);
183 skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
184 skt->res_io.name = "io";
185 skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
187 skt->res_mem.start = _PCMCIAMem(skt->nr);
188 skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
189 skt->res_mem.name = "memory";
190 skt->res_mem.flags = IORESOURCE_MEM;
192 skt->res_attr.start = _PCMCIAAttr(skt->nr);
193 skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
194 skt->res_attr.name = "attribute";
195 skt->res_attr.flags = IORESOURCE_MEM;
197 return soc_pcmcia_add_one(skt);
199 EXPORT_SYMBOL(sa11xx_drv_pcmcia_add_one);
201 void sa11xx_drv_pcmcia_ops(struct pcmcia_low_level *ops)
204 * set default MECR calculation if the board specific
205 * code did not specify one...
207 if (!ops->get_timing)
208 ops->get_timing = sa1100_pcmcia_default_mecr_timing;
210 /* Provide our SA11x0 specific timing routines. */
211 ops->set_timing = sa1100_pcmcia_set_timing;
212 ops->show_timing = sa1100_pcmcia_show_timing;
213 #ifdef CONFIG_CPU_FREQ
214 ops->frequency_change = sa1100_pcmcia_frequency_change;
215 #endif
217 EXPORT_SYMBOL(sa11xx_drv_pcmcia_ops);
219 int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
220 int first, int nr)
222 struct skt_dev_info *sinfo;
223 struct soc_pcmcia_socket *skt;
224 int i, ret = 0;
226 sa11xx_drv_pcmcia_ops(ops);
228 sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
229 if (!sinfo)
230 return -ENOMEM;
232 sinfo->nskt = nr;
234 /* Initialize processor specific parameters */
235 for (i = 0; i < nr; i++) {
236 skt = &sinfo->skt[i];
238 skt->nr = first + i;
239 skt->ops = ops;
240 skt->socket.owner = ops->owner;
241 skt->socket.dev.parent = dev;
242 skt->socket.pci_irq = NO_IRQ;
244 ret = sa11xx_drv_pcmcia_add_one(skt);
245 if (ret)
246 break;
249 if (ret) {
250 while (--i >= 0)
251 soc_pcmcia_remove_one(&sinfo->skt[i]);
252 kfree(sinfo);
253 } else {
254 dev_set_drvdata(dev, sinfo);
257 return ret;
259 EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe);
261 static int __init sa11xx_pcmcia_init(void)
263 return 0;
265 fs_initcall(sa11xx_pcmcia_init);
267 static void __exit sa11xx_pcmcia_exit(void) {}
269 module_exit(sa11xx_pcmcia_exit);
271 MODULE_AUTHOR("John Dorsey <john+@cs.cmu.edu>");
272 MODULE_DESCRIPTION("Linux PCMCIA Card Services: SA-11xx core socket driver");
273 MODULE_LICENSE("Dual MPL/GPL");