KVM: x86 emulator: Don't force #UD for 0F 01 /5
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / dma / ste_dma40_ll.h
blob195ee65ee7f3513111f212c3b51a69bd92d96a67
1 /*
2 * Copyright (C) ST-Ericsson SA 2007-2010
3 * Author: Per Friden <per.friden@stericsson.com> for ST-Ericsson SA
4 * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson SA
5 * License terms: GNU General Public License (GPL) version 2
6 */
7 #ifndef STE_DMA40_LL_H
8 #define STE_DMA40_LL_H
10 #define D40_DREG_PCBASE 0x400
11 #define D40_DREG_PCDELTA (8 * 4)
12 #define D40_LLI_ALIGN 16 /* LLI alignment must be 16 bytes. */
14 #define D40_LCPA_CHAN_SIZE 32
15 #define D40_LCPA_CHAN_DST_DELTA 16
17 #define D40_TYPE_TO_GROUP(type) (type / 16)
18 #define D40_TYPE_TO_EVENT(type) (type % 16)
20 /* Most bits of the CFG register are the same in log as in phy mode */
21 #define D40_SREG_CFG_MST_POS 15
22 #define D40_SREG_CFG_TIM_POS 14
23 #define D40_SREG_CFG_EIM_POS 13
24 #define D40_SREG_CFG_LOG_INCR_POS 12
25 #define D40_SREG_CFG_PHY_PEN_POS 12
26 #define D40_SREG_CFG_PSIZE_POS 10
27 #define D40_SREG_CFG_ESIZE_POS 8
28 #define D40_SREG_CFG_PRI_POS 7
29 #define D40_SREG_CFG_LBE_POS 6
30 #define D40_SREG_CFG_LOG_GIM_POS 5
31 #define D40_SREG_CFG_LOG_MFU_POS 4
32 #define D40_SREG_CFG_PHY_TM_POS 4
33 #define D40_SREG_CFG_PHY_EVTL_POS 0
36 /* Standard channel parameters - basic mode (element register) */
37 #define D40_SREG_ELEM_PHY_ECNT_POS 16
38 #define D40_SREG_ELEM_PHY_EIDX_POS 0
40 #define D40_SREG_ELEM_PHY_ECNT_MASK (0xFFFF << D40_SREG_ELEM_PHY_ECNT_POS)
42 /* Standard channel parameters - basic mode (Link register) */
43 #define D40_SREG_LNK_PHY_TCP_POS 0
44 #define D40_SREG_LNK_PHY_LMP_POS 1
45 #define D40_SREG_LNK_PHY_PRE_POS 2
47 * Source destination link address. Contains the
48 * 29-bit byte word aligned address of the reload area.
50 #define D40_SREG_LNK_PHYS_LNK_MASK 0xFFFFFFF8UL
52 /* Standard basic channel logical mode */
54 /* Element register */
55 #define D40_SREG_ELEM_LOG_ECNT_POS 16
56 #define D40_SREG_ELEM_LOG_LIDX_POS 8
57 #define D40_SREG_ELEM_LOG_LOS_POS 1
58 #define D40_SREG_ELEM_LOG_TCP_POS 0
60 #define D40_SREG_ELEM_LOG_LIDX_MASK (0xFF << D40_SREG_ELEM_LOG_LIDX_POS)
62 /* Link register */
63 #define D40_DEACTIVATE_EVENTLINE 0x0
64 #define D40_ACTIVATE_EVENTLINE 0x1
65 #define D40_EVENTLINE_POS(i) (2 * i)
66 #define D40_EVENTLINE_MASK(i) (0x3 << D40_EVENTLINE_POS(i))
68 /* Standard basic channel logical params in memory */
70 /* LCSP0 */
71 #define D40_MEM_LCSP0_ECNT_POS 16
72 #define D40_MEM_LCSP0_SPTR_POS 0
74 #define D40_MEM_LCSP0_ECNT_MASK (0xFFFF << D40_MEM_LCSP0_ECNT_POS)
75 #define D40_MEM_LCSP0_SPTR_MASK (0xFFFF << D40_MEM_LCSP0_SPTR_POS)
77 /* LCSP1 */
78 #define D40_MEM_LCSP1_SPTR_POS 16
79 #define D40_MEM_LCSP1_SCFG_MST_POS 15
80 #define D40_MEM_LCSP1_SCFG_TIM_POS 14
81 #define D40_MEM_LCSP1_SCFG_EIM_POS 13
82 #define D40_MEM_LCSP1_SCFG_INCR_POS 12
83 #define D40_MEM_LCSP1_SCFG_PSIZE_POS 10
84 #define D40_MEM_LCSP1_SCFG_ESIZE_POS 8
85 #define D40_MEM_LCSP1_SLOS_POS 1
86 #define D40_MEM_LCSP1_STCP_POS 0
88 #define D40_MEM_LCSP1_SPTR_MASK (0xFFFF << D40_MEM_LCSP1_SPTR_POS)
89 #define D40_MEM_LCSP1_SCFG_TIM_MASK (0x1 << D40_MEM_LCSP1_SCFG_TIM_POS)
90 #define D40_MEM_LCSP1_SCFG_INCR_MASK (0x1 << D40_MEM_LCSP1_SCFG_INCR_POS)
91 #define D40_MEM_LCSP1_SCFG_PSIZE_MASK (0x3 << D40_MEM_LCSP1_SCFG_PSIZE_POS)
92 #define D40_MEM_LCSP1_SLOS_MASK (0x7F << D40_MEM_LCSP1_SLOS_POS)
93 #define D40_MEM_LCSP1_STCP_MASK (0x1 << D40_MEM_LCSP1_STCP_POS)
95 /* LCSP2 */
96 #define D40_MEM_LCSP2_ECNT_POS 16
98 #define D40_MEM_LCSP2_ECNT_MASK (0xFFFF << D40_MEM_LCSP2_ECNT_POS)
100 /* LCSP3 */
101 #define D40_MEM_LCSP3_DCFG_MST_POS 15
102 #define D40_MEM_LCSP3_DCFG_TIM_POS 14
103 #define D40_MEM_LCSP3_DCFG_EIM_POS 13
104 #define D40_MEM_LCSP3_DCFG_INCR_POS 12
105 #define D40_MEM_LCSP3_DCFG_PSIZE_POS 10
106 #define D40_MEM_LCSP3_DCFG_ESIZE_POS 8
107 #define D40_MEM_LCSP3_DLOS_POS 1
108 #define D40_MEM_LCSP3_DTCP_POS 0
110 #define D40_MEM_LCSP3_DLOS_MASK (0x7F << D40_MEM_LCSP3_DLOS_POS)
111 #define D40_MEM_LCSP3_DTCP_MASK (0x1 << D40_MEM_LCSP3_DTCP_POS)
114 /* Standard channel parameter register offsets */
115 #define D40_CHAN_REG_SSCFG 0x00
116 #define D40_CHAN_REG_SSELT 0x04
117 #define D40_CHAN_REG_SSPTR 0x08
118 #define D40_CHAN_REG_SSLNK 0x0C
119 #define D40_CHAN_REG_SDCFG 0x10
120 #define D40_CHAN_REG_SDELT 0x14
121 #define D40_CHAN_REG_SDPTR 0x18
122 #define D40_CHAN_REG_SDLNK 0x1C
124 /* DMA Register Offsets */
125 #define D40_DREG_GCC 0x000
126 #define D40_DREG_PRTYP 0x004
127 #define D40_DREG_PRSME 0x008
128 #define D40_DREG_PRSMO 0x00C
129 #define D40_DREG_PRMSE 0x010
130 #define D40_DREG_PRMSO 0x014
131 #define D40_DREG_PRMOE 0x018
132 #define D40_DREG_PRMOO 0x01C
133 #define D40_DREG_PRMO_PCHAN_BASIC 0x1
134 #define D40_DREG_PRMO_PCHAN_MODULO 0x2
135 #define D40_DREG_PRMO_PCHAN_DOUBLE_DST 0x3
136 #define D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG 0x1
137 #define D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY 0x2
138 #define D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG 0x3
140 #define D40_DREG_LCPA 0x020
141 #define D40_DREG_LCLA 0x024
142 #define D40_DREG_ACTIVE 0x050
143 #define D40_DREG_ACTIVO 0x054
144 #define D40_DREG_FSEB1 0x058
145 #define D40_DREG_FSEB2 0x05C
146 #define D40_DREG_PCMIS 0x060
147 #define D40_DREG_PCICR 0x064
148 #define D40_DREG_PCTIS 0x068
149 #define D40_DREG_PCEIS 0x06C
150 #define D40_DREG_LCMIS0 0x080
151 #define D40_DREG_LCMIS1 0x084
152 #define D40_DREG_LCMIS2 0x088
153 #define D40_DREG_LCMIS3 0x08C
154 #define D40_DREG_LCICR0 0x090
155 #define D40_DREG_LCICR1 0x094
156 #define D40_DREG_LCICR2 0x098
157 #define D40_DREG_LCICR3 0x09C
158 #define D40_DREG_LCTIS0 0x0A0
159 #define D40_DREG_LCTIS1 0x0A4
160 #define D40_DREG_LCTIS2 0x0A8
161 #define D40_DREG_LCTIS3 0x0AC
162 #define D40_DREG_LCEIS0 0x0B0
163 #define D40_DREG_LCEIS1 0x0B4
164 #define D40_DREG_LCEIS2 0x0B8
165 #define D40_DREG_LCEIS3 0x0BC
166 #define D40_DREG_PSEG1 0x110
167 #define D40_DREG_PSEG2 0x114
168 #define D40_DREG_PSEG3 0x118
169 #define D40_DREG_PSEG4 0x11C
170 #define D40_DREG_PCEG1 0x120
171 #define D40_DREG_PCEG2 0x124
172 #define D40_DREG_PCEG3 0x128
173 #define D40_DREG_PCEG4 0x12C
174 #define D40_DREG_RSEG1 0x130
175 #define D40_DREG_RSEG2 0x134
176 #define D40_DREG_RSEG3 0x138
177 #define D40_DREG_RSEG4 0x13C
178 #define D40_DREG_RCEG1 0x140
179 #define D40_DREG_RCEG2 0x144
180 #define D40_DREG_RCEG3 0x148
181 #define D40_DREG_RCEG4 0x14C
182 #define D40_DREG_STFU 0xFC8
183 #define D40_DREG_ICFG 0xFCC
184 #define D40_DREG_PERIPHID0 0xFE0
185 #define D40_DREG_PERIPHID1 0xFE4
186 #define D40_DREG_PERIPHID2 0xFE8
187 #define D40_DREG_PERIPHID2_REV_POS 4
188 #define D40_DREG_PERIPHID2_REV_MASK (0xf << D40_DREG_PERIPHID2_REV_POS)
189 #define D40_DREG_PERIPHID2_DESIGNER_MASK 0xf
190 #define D40_DREG_PERIPHID3 0xFEC
191 #define D40_DREG_CELLID0 0xFF0
192 #define D40_DREG_CELLID1 0xFF4
193 #define D40_DREG_CELLID2 0xFF8
194 #define D40_DREG_CELLID3 0xFFC
196 /* LLI related structures */
199 * struct d40_phy_lli - The basic configration register for each physical
200 * channel.
202 * @reg_cfg: The configuration register.
203 * @reg_elt: The element register.
204 * @reg_ptr: The pointer register.
205 * @reg_lnk: The link register.
207 * These registers are set up for both physical and logical transfers
208 * Note that the bit in each register means differently in logical and
209 * physical(standard) mode.
211 * This struct must be 16 bytes aligned, and only contain physical registers
212 * since it will be directly accessed by the DMA.
214 struct d40_phy_lli {
215 u32 reg_cfg;
216 u32 reg_elt;
217 u32 reg_ptr;
218 u32 reg_lnk;
222 * struct d40_phy_lli_bidir - struct for a transfer.
224 * @src: Register settings for src channel.
225 * @dst: Register settings for dst channel.
227 * All DMA transfers have a source and a destination.
230 struct d40_phy_lli_bidir {
231 struct d40_phy_lli *src;
232 struct d40_phy_lli *dst;
237 * struct d40_log_lli - logical lli configuration
239 * @lcsp02: Either maps to register lcsp0 if src or lcsp2 if dst.
240 * @lcsp13: Either maps to register lcsp1 if src or lcsp3 if dst.
242 * This struct must be 8 bytes aligned since it will be accessed directy by
243 * the DMA. Never add any none hw mapped registers to this struct.
246 struct d40_log_lli {
247 u32 lcsp02;
248 u32 lcsp13;
252 * struct d40_log_lli_bidir - For both src and dst
254 * @src: pointer to src lli configuration.
255 * @dst: pointer to dst lli configuration.
257 * You always have a src and a dst when doing DMA transfers.
260 struct d40_log_lli_bidir {
261 struct d40_log_lli *src;
262 struct d40_log_lli *dst;
266 * struct d40_log_lli_full - LCPA layout
268 * @lcsp0: Logical Channel Standard Param 0 - Src.
269 * @lcsp1: Logical Channel Standard Param 1 - Src.
270 * @lcsp2: Logical Channel Standard Param 2 - Dst.
271 * @lcsp3: Logical Channel Standard Param 3 - Dst.
273 * This struct maps to LCPA physical memory layout. Must map to
274 * the hw.
276 struct d40_log_lli_full {
277 u32 lcsp0;
278 u32 lcsp1;
279 u32 lcsp2;
280 u32 lcsp3;
284 * struct d40_def_lcsp - Default LCSP1 and LCSP3 settings
286 * @lcsp3: The default configuration for dst.
287 * @lcsp1: The default configuration for src.
289 struct d40_def_lcsp {
290 u32 lcsp3;
291 u32 lcsp1;
294 /* Physical channels */
296 enum d40_lli_flags {
297 LLI_ADDR_INC = 1 << 0,
298 LLI_TERM_INT = 1 << 1,
299 LLI_CYCLIC = 1 << 2,
300 LLI_LAST_LINK = 1 << 3,
303 void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
304 u32 *src_cfg,
305 u32 *dst_cfg,
306 bool is_log);
308 void d40_log_cfg(struct stedma40_chan_cfg *cfg,
309 u32 *lcsp1,
310 u32 *lcsp2);
312 int d40_phy_sg_to_lli(struct scatterlist *sg,
313 int sg_len,
314 dma_addr_t target,
315 struct d40_phy_lli *lli,
316 dma_addr_t lli_phys,
317 u32 reg_cfg,
318 struct stedma40_half_channel_info *info,
319 struct stedma40_half_channel_info *otherinfo,
320 unsigned long flags);
322 /* Logical channels */
324 int d40_log_sg_to_lli(struct scatterlist *sg,
325 int sg_len,
326 dma_addr_t dev_addr,
327 struct d40_log_lli *lli_sg,
328 u32 lcsp13, /* src or dst*/
329 u32 data_width1, u32 data_width2);
331 void d40_log_lli_lcpa_write(struct d40_log_lli_full *lcpa,
332 struct d40_log_lli *lli_dst,
333 struct d40_log_lli *lli_src,
334 int next, unsigned int flags);
336 void d40_log_lli_lcla_write(struct d40_log_lli *lcla,
337 struct d40_log_lli *lli_dst,
338 struct d40_log_lli *lli_src,
339 int next, unsigned int flags);
341 #endif /* STE_DMA40_LLI_H */