include/asm-v850/as85ep1.h

   1 /*
   2  * include/asm-v850/as85ep1.h -- AS85EP1 evaluation CPU chip/board
   3  *
   4  *  Copyright (C) 2001,02,03  NEC Electronics Corporation
   5  *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
   6  *
   7  * This file is subject to the terms and conditions of the GNU General
   8  * Public License.  See the file COPYING in the main directory of this
   9  * archive for more details.
  10  *
  11  * Written by Miles Bader <miles@gnu.org>
  12  */
  13
  14 #ifndef __V850_AS85EP1_H__
  15 #define __V850_AS85EP1_H__
  16
  17 #include <asm/v850e.h>
  18
  19
  20 #define CPU_MODEL       "as85ep1"
  21 #define CPU_MODEL_LONG  "NEC V850E/AS85EP1"
  22 #define PLATFORM        "AS85EP1"
  23 #define PLATFORM_LONG   "NEC V850E/AS85EP1 evaluation board"
  24
  25 #define CPU_CLOCK_FREQ  96000000 /*  96MHz */
  26 #define SYS_CLOCK_FREQ  CPU_CLOCK_FREQ
  27
  28
  29 /* 1MB of static RAM.  */
  30 #define SRAM_ADDR       0x00400000
  31 #define SRAM_SIZE       0x00100000 /* 1MB */
  32 /* About 58MB of DRAM.  This can actually be at one of two positions,
  33    determined by jump JP3; we have to use the first position because the
  34    second is partially out of processor instruction addressing range
  35    (though in the second position there's actually 64MB available).  */
  36 #define SDRAM_ADDR      0x00600000
  37 #define SDRAM_SIZE      0x039F8000 /* approx 58MB */
  38
  39 /* For <asm/page.h> */
  40 #define PAGE_OFFSET     SRAM_ADDR
  41
  42 /* We use on-chip RAM, for a few miscellaneous variables that must be
  43    accessible using a load instruction relative to R0.  The AS85EP1 chip
  44    16K of internal RAM located slightly before I/O space.  */
  45 #define R0_RAM_ADDR     0xFFFF8000
  46
  47
  48 /* AS85EP1 specific control registers.  */
  49 #define AS85EP1_CSC_ADDR(n)     (0xFFFFF060 + (n) * 2)
  50 #define AS85EP1_CSC(n)          (*(volatile u16 *)AS85EP1_CSC_ADDR(n))
  51 #define AS85EP1_BSC_ADDR        0xFFFFF066
  52 #define AS85EP1_BSC             (*(volatile u16 *)AS85EP1_BSC_ADDR)
  53 #define AS85EP1_BCT_ADDR(n)     (0xFFFFF480 + (n) * 2)
  54 #define AS85EP1_BCT(n)          (*(volatile u16 *)AS85EP1_BCT_ADDR(n))
  55 #define AS85EP1_DWC_ADDR(n)     (0xFFFFF484 + (n) * 2)
  56 #define AS85EP1_DWC(n)          (*(volatile u16 *)AS85EP1_DWC_ADDR(n))
  57 #define AS85EP1_BCC_ADDR        0xFFFFF488
  58 #define AS85EP1_BCC             (*(volatile u16 *)AS85EP1_BCC_ADDR)
  59 #define AS85EP1_ASC_ADDR        0xFFFFF48A
  60 #define AS85EP1_ASC             (*(volatile u16 *)AS85EP1_ASC_ADDR)
  61 #define AS85EP1_BCP_ADDR        0xFFFFF48C
  62 #define AS85EP1_BCP             (*(volatile u16 *)AS85EP1_BCP_ADDR)
  63 #define AS85EP1_LBS_ADDR        0xFFFFF48E
  64 #define AS85EP1_LBS             (*(volatile u16 *)AS85EP1_LBS_ADDR)
  65 #define AS85EP1_BMC_ADDR        0xFFFFF498
  66 #define AS85EP1_BMC             (*(volatile u16 *)AS85EP1_BMC_ADDR)
  67 #define AS85EP1_PRC_ADDR        0xFFFFF49A
  68 #define AS85EP1_PRC             (*(volatile u16 *)AS85EP1_PRC_ADDR)
  69 #define AS85EP1_SCR_ADDR(n)     (0xFFFFF4A0 + (n) * 4)
  70 #define AS85EP1_SCR(n)          (*(volatile u16 *)AS85EP1_SCR_ADDR(n))
  71 #define AS85EP1_RFS_ADDR(n)     (0xFFFFF4A2 + (n) * 4)
  72 #define AS85EP1_RFS(n)          (*(volatile u16 *)AS85EP1_RFS_ADDR(n))
  73 #define AS85EP1_IRAMM_ADDR      0xFFFFF80A
  74 #define AS85EP1_IRAMM           (*(volatile u8 *)AS85EP1_IRAMM_ADDR)
  75
  76
  77
  78 /* I/O port P0-P13. */
  79 /* Direct I/O.  Bits 0-7 are pins Pn0-Pn7.  */
  80 #define AS85EP1_PORT_IO_ADDR(n) (0xFFFFF400 + (n) * 2)
  81 #define AS85EP1_PORT_IO(n)      (*(volatile u8 *)AS85EP1_PORT_IO_ADDR(n))
  82 /* Port mode (for direct I/O, 0 = output, 1 = input).  */
  83 #define AS85EP1_PORT_PM_ADDR(n) (0xFFFFF420 + (n) * 2)
  84 #define AS85EP1_PORT_PM(n)      (*(volatile u8 *)AS85EP1_PORT_PM_ADDR(n))
  85 /* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
  86 #define AS85EP1_PORT_PMC_ADDR(n) (0xFFFFF440 + (n) * 2)
  87 #define AS85EP1_PORT_PMC(n)     (*(volatile u8 *)AS85EP1_PORT_PMC_ADDR(n))
  88
  89
  90 /* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
  91 #define IRQ_INTCCC(n)   (0x0C + (n))
  92 #define IRQ_INTCCC_NUM  8
  93 #define IRQ_INTCMD(n)   (0x14 + (n)) /* interval timer interrupts 0-5 */
  94 #define IRQ_INTCMD_NUM  6
  95 #define IRQ_INTSRE(n)   (0x1E + (n)*3) /* UART 0-1 reception error */
  96 #define IRQ_INTSRE_NUM  2
  97 #define IRQ_INTSR(n)    (0x1F + (n)*3) /* UART 0-1 reception completion */
  98 #define IRQ_INTSR_NUM   2
  99 #define IRQ_INTST(n)    (0x20 + (n)*3) /* UART 0-1 transmission completion */
 100 #define IRQ_INTST_NUM   2
 101
 102 #define NUM_CPU_IRQS    64
 103
 104 #ifndef __ASSEMBLY__
 105 /* Initialize chip interrupts.  */
 106 extern void as85ep1_init_irqs (void);
 107 #endif
 108
 109
 110 /* AS85EP1 UART details (basically the same as the V850E/MA1, but 2 channels).  */
 111 #define V850E_UART_NUM_CHANNELS         2
 112 #define V850E_UART_BASE_FREQ            (SYS_CLOCK_FREQ / 4)
 113 #define V850E_UART_CHIP_NAME            "V850E/NA85E"
 114
 115 /* This is a function that gets called before configuring the UART.  */
 116 #define V850E_UART_PRE_CONFIGURE        as85ep1_uart_pre_configure
 117 #ifndef __ASSEMBLY__
 118 extern void as85ep1_uart_pre_configure (unsigned chan,
 119                                         unsigned cflags, unsigned baud);
 120 #endif
 121
 122 /* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
 123
 124 /* CTS for UART channel 1 is pin P54 (bit 4 of port 5).  */
 125 #define V850E_UART_CTS(chan)   ((chan) == 1 ? !(AS85EP1_PORT_IO(5) & 0x10) : 1)
 126 /* RTS for UART channel 1 is pin P53 (bit 3 of port 5).  */
 127 #define V850E_UART_SET_RTS(chan, val)                                         \
 128    do {                                                                       \
 129            if (chan == 1) {                                                   \
 130                    unsigned old = AS85EP1_PORT_IO(5);                         \
 131                    if (val)                                                   \
 132                            AS85EP1_PORT_IO(5) = old & ~0x8;                   \
 133                    else                                                       \
 134                            AS85EP1_PORT_IO(5) = old | 0x8;                    \
 135            }                                                                  \
 136    } while (0)
 137
 138
 139 /* Timer C details.  */
 140 #define V850E_TIMER_C_BASE_ADDR         0xFFFFF600
 141
 142 /* Timer D details (the AS85EP1 actually has 5 of these; should change later). */
 143 #define V850E_TIMER_D_BASE_ADDR         0xFFFFF540
 144 #define V850E_TIMER_D_TMD_BASE_ADDR     (V850E_TIMER_D_BASE_ADDR + 0x0)
 145 #define V850E_TIMER_D_CMD_BASE_ADDR     (V850E_TIMER_D_BASE_ADDR + 0x2)
 146 #define V850E_TIMER_D_TMCD_BASE_ADDR    (V850E_TIMER_D_BASE_ADDR + 0x4)
 147
 148 #define V850E_TIMER_D_BASE_FREQ         SYS_CLOCK_FREQ
 149 #define V850E_TIMER_D_TMCD_CS_MIN       2 /* min 2^2 divider */
 150
 151
 152 /* For <asm/param.h> */
 153 #ifndef HZ
 154 #define HZ      100
 155 #endif
 156
 157
 158 #endif /* __V850_AS85EP1_H__ */