uwb: fix oops when terminating an already terminated reservation
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / net / spider_net.c
blob07599b492359f16bc348f4271eb32793a3a362e0
1 /*
2 * Network device driver for Cell Processor-Based Blade and Celleb platform
4 * (C) Copyright IBM Corp. 2005
5 * (C) Copyright 2006 TOSHIBA CORPORATION
7 * Authors : Utz Bacher <utz.bacher@de.ibm.com>
8 * Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2, or (at your option)
13 * any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/compiler.h>
26 #include <linux/crc32.h>
27 #include <linux/delay.h>
28 #include <linux/etherdevice.h>
29 #include <linux/ethtool.h>
30 #include <linux/firmware.h>
31 #include <linux/if_vlan.h>
32 #include <linux/in.h>
33 #include <linux/init.h>
34 #include <linux/ioport.h>
35 #include <linux/ip.h>
36 #include <linux/kernel.h>
37 #include <linux/mii.h>
38 #include <linux/module.h>
39 #include <linux/netdevice.h>
40 #include <linux/device.h>
41 #include <linux/pci.h>
42 #include <linux/skbuff.h>
43 #include <linux/slab.h>
44 #include <linux/tcp.h>
45 #include <linux/types.h>
46 #include <linux/vmalloc.h>
47 #include <linux/wait.h>
48 #include <linux/workqueue.h>
49 #include <linux/bitops.h>
50 #include <asm/pci-bridge.h>
51 #include <net/checksum.h>
53 #include "spider_net.h"
55 MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \
56 "<Jens.Osterkamp@de.ibm.com>");
57 MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver");
58 MODULE_LICENSE("GPL");
59 MODULE_VERSION(VERSION);
61 static int rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_DEFAULT;
62 static int tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_DEFAULT;
64 module_param(rx_descriptors, int, 0444);
65 module_param(tx_descriptors, int, 0444);
67 MODULE_PARM_DESC(rx_descriptors, "number of descriptors used " \
68 "in rx chains");
69 MODULE_PARM_DESC(tx_descriptors, "number of descriptors used " \
70 "in tx chain");
72 char spider_net_driver_name[] = "spidernet";
74 static struct pci_device_id spider_net_pci_tbl[] = {
75 { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET,
76 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
77 { 0, }
80 MODULE_DEVICE_TABLE(pci, spider_net_pci_tbl);
82 /**
83 * spider_net_read_reg - reads an SMMIO register of a card
84 * @card: device structure
85 * @reg: register to read from
87 * returns the content of the specified SMMIO register.
89 static inline u32
90 spider_net_read_reg(struct spider_net_card *card, u32 reg)
92 /* We use the powerpc specific variants instead of readl_be() because
93 * we know spidernet is not a real PCI device and we can thus avoid the
94 * performance hit caused by the PCI workarounds.
96 return in_be32(card->regs + reg);
99 /**
100 * spider_net_write_reg - writes to an SMMIO register of a card
101 * @card: device structure
102 * @reg: register to write to
103 * @value: value to write into the specified SMMIO register
105 static inline void
106 spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value)
108 /* We use the powerpc specific variants instead of writel_be() because
109 * we know spidernet is not a real PCI device and we can thus avoid the
110 * performance hit caused by the PCI workarounds.
112 out_be32(card->regs + reg, value);
115 /** spider_net_write_phy - write to phy register
116 * @netdev: adapter to be written to
117 * @mii_id: id of MII
118 * @reg: PHY register
119 * @val: value to be written to phy register
121 * spider_net_write_phy_register writes to an arbitrary PHY
122 * register via the spider GPCWOPCMD register. We assume the queue does
123 * not run full (not more than 15 commands outstanding).
125 static void
126 spider_net_write_phy(struct net_device *netdev, int mii_id,
127 int reg, int val)
129 struct spider_net_card *card = netdev_priv(netdev);
130 u32 writevalue;
132 writevalue = ((u32)mii_id << 21) |
133 ((u32)reg << 16) | ((u32)val);
135 spider_net_write_reg(card, SPIDER_NET_GPCWOPCMD, writevalue);
138 /** spider_net_read_phy - read from phy register
139 * @netdev: network device to be read from
140 * @mii_id: id of MII
141 * @reg: PHY register
143 * Returns value read from PHY register
145 * spider_net_write_phy reads from an arbitrary PHY
146 * register via the spider GPCROPCMD register
148 static int
149 spider_net_read_phy(struct net_device *netdev, int mii_id, int reg)
151 struct spider_net_card *card = netdev_priv(netdev);
152 u32 readvalue;
154 readvalue = ((u32)mii_id << 21) | ((u32)reg << 16);
155 spider_net_write_reg(card, SPIDER_NET_GPCROPCMD, readvalue);
157 /* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT
158 * interrupt, as we poll for the completion of the read operation
159 * in spider_net_read_phy. Should take about 50 us */
160 do {
161 readvalue = spider_net_read_reg(card, SPIDER_NET_GPCROPCMD);
162 } while (readvalue & SPIDER_NET_GPREXEC);
164 readvalue &= SPIDER_NET_GPRDAT_MASK;
166 return readvalue;
170 * spider_net_setup_aneg - initial auto-negotiation setup
171 * @card: device structure
173 static void
174 spider_net_setup_aneg(struct spider_net_card *card)
176 struct mii_phy *phy = &card->phy;
177 u32 advertise = 0;
178 u16 bmsr, estat;
180 bmsr = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
181 estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS);
183 if (bmsr & BMSR_10HALF)
184 advertise |= ADVERTISED_10baseT_Half;
185 if (bmsr & BMSR_10FULL)
186 advertise |= ADVERTISED_10baseT_Full;
187 if (bmsr & BMSR_100HALF)
188 advertise |= ADVERTISED_100baseT_Half;
189 if (bmsr & BMSR_100FULL)
190 advertise |= ADVERTISED_100baseT_Full;
192 if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_TFULL))
193 advertise |= SUPPORTED_1000baseT_Full;
194 if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_THALF))
195 advertise |= SUPPORTED_1000baseT_Half;
197 mii_phy_probe(phy, phy->mii_id);
198 phy->def->ops->setup_aneg(phy, advertise);
203 * spider_net_rx_irq_off - switch off rx irq on this spider card
204 * @card: device structure
206 * switches off rx irq by masking them out in the GHIINTnMSK register
208 static void
209 spider_net_rx_irq_off(struct spider_net_card *card)
211 u32 regvalue;
213 regvalue = SPIDER_NET_INT0_MASK_VALUE & (~SPIDER_NET_RXINT);
214 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
218 * spider_net_rx_irq_on - switch on rx irq on this spider card
219 * @card: device structure
221 * switches on rx irq by enabling them in the GHIINTnMSK register
223 static void
224 spider_net_rx_irq_on(struct spider_net_card *card)
226 u32 regvalue;
228 regvalue = SPIDER_NET_INT0_MASK_VALUE | SPIDER_NET_RXINT;
229 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
233 * spider_net_set_promisc - sets the unicast address or the promiscuous mode
234 * @card: card structure
236 * spider_net_set_promisc sets the unicast destination address filter and
237 * thus either allows for non-promisc mode or promisc mode
239 static void
240 spider_net_set_promisc(struct spider_net_card *card)
242 u32 macu, macl;
243 struct net_device *netdev = card->netdev;
245 if (netdev->flags & IFF_PROMISC) {
246 /* clear destination entry 0 */
247 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, 0);
248 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, 0);
249 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
250 SPIDER_NET_PROMISC_VALUE);
251 } else {
252 macu = netdev->dev_addr[0];
253 macu <<= 8;
254 macu |= netdev->dev_addr[1];
255 memcpy(&macl, &netdev->dev_addr[2], sizeof(macl));
257 macu |= SPIDER_NET_UA_DESCR_VALUE;
258 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, macu);
259 spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, macl);
260 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
261 SPIDER_NET_NONPROMISC_VALUE);
266 * spider_net_get_mac_address - read mac address from spider card
267 * @card: device structure
269 * reads MAC address from GMACUNIMACU and GMACUNIMACL registers
271 static int
272 spider_net_get_mac_address(struct net_device *netdev)
274 struct spider_net_card *card = netdev_priv(netdev);
275 u32 macl, macu;
277 macl = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACL);
278 macu = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACU);
280 netdev->dev_addr[0] = (macu >> 24) & 0xff;
281 netdev->dev_addr[1] = (macu >> 16) & 0xff;
282 netdev->dev_addr[2] = (macu >> 8) & 0xff;
283 netdev->dev_addr[3] = macu & 0xff;
284 netdev->dev_addr[4] = (macl >> 8) & 0xff;
285 netdev->dev_addr[5] = macl & 0xff;
287 if (!is_valid_ether_addr(&netdev->dev_addr[0]))
288 return -EINVAL;
290 return 0;
294 * spider_net_get_descr_status -- returns the status of a descriptor
295 * @descr: descriptor to look at
297 * returns the status as in the dmac_cmd_status field of the descriptor
299 static inline int
300 spider_net_get_descr_status(struct spider_net_hw_descr *hwdescr)
302 return hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_IND_PROC_MASK;
306 * spider_net_free_chain - free descriptor chain
307 * @card: card structure
308 * @chain: address of chain
311 static void
312 spider_net_free_chain(struct spider_net_card *card,
313 struct spider_net_descr_chain *chain)
315 struct spider_net_descr *descr;
317 descr = chain->ring;
318 do {
319 descr->bus_addr = 0;
320 descr->hwdescr->next_descr_addr = 0;
321 descr = descr->next;
322 } while (descr != chain->ring);
324 dma_free_coherent(&card->pdev->dev, chain->num_desc,
325 chain->hwring, chain->dma_addr);
329 * spider_net_init_chain - alloc and link descriptor chain
330 * @card: card structure
331 * @chain: address of chain
333 * We manage a circular list that mirrors the hardware structure,
334 * except that the hardware uses bus addresses.
336 * Returns 0 on success, <0 on failure
338 static int
339 spider_net_init_chain(struct spider_net_card *card,
340 struct spider_net_descr_chain *chain)
342 int i;
343 struct spider_net_descr *descr;
344 struct spider_net_hw_descr *hwdescr;
345 dma_addr_t buf;
346 size_t alloc_size;
348 alloc_size = chain->num_desc * sizeof(struct spider_net_hw_descr);
350 chain->hwring = dma_alloc_coherent(&card->pdev->dev, alloc_size,
351 &chain->dma_addr, GFP_KERNEL);
353 if (!chain->hwring)
354 return -ENOMEM;
356 memset(chain->ring, 0, chain->num_desc * sizeof(struct spider_net_descr));
358 /* Set up the hardware pointers in each descriptor */
359 descr = chain->ring;
360 hwdescr = chain->hwring;
361 buf = chain->dma_addr;
362 for (i=0; i < chain->num_desc; i++, descr++, hwdescr++) {
363 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
364 hwdescr->next_descr_addr = 0;
366 descr->hwdescr = hwdescr;
367 descr->bus_addr = buf;
368 descr->next = descr + 1;
369 descr->prev = descr - 1;
371 buf += sizeof(struct spider_net_hw_descr);
373 /* do actual circular list */
374 (descr-1)->next = chain->ring;
375 chain->ring->prev = descr-1;
377 spin_lock_init(&chain->lock);
378 chain->head = chain->ring;
379 chain->tail = chain->ring;
380 return 0;
384 * spider_net_free_rx_chain_contents - frees descr contents in rx chain
385 * @card: card structure
387 * returns 0 on success, <0 on failure
389 static void
390 spider_net_free_rx_chain_contents(struct spider_net_card *card)
392 struct spider_net_descr *descr;
394 descr = card->rx_chain.head;
395 do {
396 if (descr->skb) {
397 pci_unmap_single(card->pdev, descr->hwdescr->buf_addr,
398 SPIDER_NET_MAX_FRAME,
399 PCI_DMA_BIDIRECTIONAL);
400 dev_kfree_skb(descr->skb);
401 descr->skb = NULL;
403 descr = descr->next;
404 } while (descr != card->rx_chain.head);
408 * spider_net_prepare_rx_descr - Reinitialize RX descriptor
409 * @card: card structure
410 * @descr: descriptor to re-init
412 * Return 0 on succes, <0 on failure.
414 * Allocates a new rx skb, iommu-maps it and attaches it to the
415 * descriptor. Mark the descriptor as activated, ready-to-use.
417 static int
418 spider_net_prepare_rx_descr(struct spider_net_card *card,
419 struct spider_net_descr *descr)
421 struct spider_net_hw_descr *hwdescr = descr->hwdescr;
422 dma_addr_t buf;
423 int offset;
424 int bufsize;
426 /* we need to round up the buffer size to a multiple of 128 */
427 bufsize = (SPIDER_NET_MAX_FRAME + SPIDER_NET_RXBUF_ALIGN - 1) &
428 (~(SPIDER_NET_RXBUF_ALIGN - 1));
430 /* and we need to have it 128 byte aligned, therefore we allocate a
431 * bit more */
432 /* allocate an skb */
433 descr->skb = netdev_alloc_skb(card->netdev,
434 bufsize + SPIDER_NET_RXBUF_ALIGN - 1);
435 if (!descr->skb) {
436 if (netif_msg_rx_err(card) && net_ratelimit())
437 dev_err(&card->netdev->dev,
438 "Not enough memory to allocate rx buffer\n");
439 card->spider_stats.alloc_rx_skb_error++;
440 return -ENOMEM;
442 hwdescr->buf_size = bufsize;
443 hwdescr->result_size = 0;
444 hwdescr->valid_size = 0;
445 hwdescr->data_status = 0;
446 hwdescr->data_error = 0;
448 offset = ((unsigned long)descr->skb->data) &
449 (SPIDER_NET_RXBUF_ALIGN - 1);
450 if (offset)
451 skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset);
452 /* iommu-map the skb */
453 buf = pci_map_single(card->pdev, descr->skb->data,
454 SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
455 if (pci_dma_mapping_error(card->pdev, buf)) {
456 dev_kfree_skb_any(descr->skb);
457 descr->skb = NULL;
458 if (netif_msg_rx_err(card) && net_ratelimit())
459 dev_err(&card->netdev->dev, "Could not iommu-map rx buffer\n");
460 card->spider_stats.rx_iommu_map_error++;
461 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
462 } else {
463 hwdescr->buf_addr = buf;
464 wmb();
465 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_CARDOWNED |
466 SPIDER_NET_DMAC_NOINTR_COMPLETE;
469 return 0;
473 * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
474 * @card: card structure
476 * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the
477 * chip by writing to the appropriate register. DMA is enabled in
478 * spider_net_enable_rxdmac.
480 static inline void
481 spider_net_enable_rxchtails(struct spider_net_card *card)
483 /* assume chain is aligned correctly */
484 spider_net_write_reg(card, SPIDER_NET_GDADCHA ,
485 card->rx_chain.tail->bus_addr);
489 * spider_net_enable_rxdmac - enables a receive DMA controller
490 * @card: card structure
492 * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
493 * in the GDADMACCNTR register
495 static inline void
496 spider_net_enable_rxdmac(struct spider_net_card *card)
498 wmb();
499 spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
500 SPIDER_NET_DMA_RX_VALUE);
504 * spider_net_disable_rxdmac - disables the receive DMA controller
505 * @card: card structure
507 * spider_net_disable_rxdmac terminates processing on the DMA controller
508 * by turing off the DMA controller, with the force-end flag set.
510 static inline void
511 spider_net_disable_rxdmac(struct spider_net_card *card)
513 spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
514 SPIDER_NET_DMA_RX_FEND_VALUE);
518 * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains
519 * @card: card structure
521 * refills descriptors in the rx chain: allocates skbs and iommu-maps them.
523 static void
524 spider_net_refill_rx_chain(struct spider_net_card *card)
526 struct spider_net_descr_chain *chain = &card->rx_chain;
527 unsigned long flags;
529 /* one context doing the refill (and a second context seeing that
530 * and omitting it) is ok. If called by NAPI, we'll be called again
531 * as spider_net_decode_one_descr is called several times. If some
532 * interrupt calls us, the NAPI is about to clean up anyway. */
533 if (!spin_trylock_irqsave(&chain->lock, flags))
534 return;
536 while (spider_net_get_descr_status(chain->head->hwdescr) ==
537 SPIDER_NET_DESCR_NOT_IN_USE) {
538 if (spider_net_prepare_rx_descr(card, chain->head))
539 break;
540 chain->head = chain->head->next;
543 spin_unlock_irqrestore(&chain->lock, flags);
547 * spider_net_alloc_rx_skbs - Allocates rx skbs in rx descriptor chains
548 * @card: card structure
550 * Returns 0 on success, <0 on failure.
552 static int
553 spider_net_alloc_rx_skbs(struct spider_net_card *card)
555 struct spider_net_descr_chain *chain = &card->rx_chain;
556 struct spider_net_descr *start = chain->tail;
557 struct spider_net_descr *descr = start;
559 /* Link up the hardware chain pointers */
560 do {
561 descr->prev->hwdescr->next_descr_addr = descr->bus_addr;
562 descr = descr->next;
563 } while (descr != start);
565 /* Put at least one buffer into the chain. if this fails,
566 * we've got a problem. If not, spider_net_refill_rx_chain
567 * will do the rest at the end of this function. */
568 if (spider_net_prepare_rx_descr(card, chain->head))
569 goto error;
570 else
571 chain->head = chain->head->next;
573 /* This will allocate the rest of the rx buffers;
574 * if not, it's business as usual later on. */
575 spider_net_refill_rx_chain(card);
576 spider_net_enable_rxdmac(card);
577 return 0;
579 error:
580 spider_net_free_rx_chain_contents(card);
581 return -ENOMEM;
585 * spider_net_get_multicast_hash - generates hash for multicast filter table
586 * @addr: multicast address
588 * returns the hash value.
590 * spider_net_get_multicast_hash calculates a hash value for a given multicast
591 * address, that is used to set the multicast filter tables
593 static u8
594 spider_net_get_multicast_hash(struct net_device *netdev, __u8 *addr)
596 u32 crc;
597 u8 hash;
598 char addr_for_crc[ETH_ALEN] = { 0, };
599 int i, bit;
601 for (i = 0; i < ETH_ALEN * 8; i++) {
602 bit = (addr[i / 8] >> (i % 8)) & 1;
603 addr_for_crc[ETH_ALEN - 1 - i / 8] += bit << (7 - (i % 8));
606 crc = crc32_be(~0, addr_for_crc, netdev->addr_len);
608 hash = (crc >> 27);
609 hash <<= 3;
610 hash |= crc & 7;
611 hash &= 0xff;
613 return hash;
617 * spider_net_set_multi - sets multicast addresses and promisc flags
618 * @netdev: interface device structure
620 * spider_net_set_multi configures multicast addresses as needed for the
621 * netdev interface. It also sets up multicast, allmulti and promisc
622 * flags appropriately
624 static void
625 spider_net_set_multi(struct net_device *netdev)
627 struct dev_mc_list *mc;
628 u8 hash;
629 int i;
630 u32 reg;
631 struct spider_net_card *card = netdev_priv(netdev);
632 unsigned long bitmask[SPIDER_NET_MULTICAST_HASHES / BITS_PER_LONG] =
633 {0, };
635 spider_net_set_promisc(card);
637 if (netdev->flags & IFF_ALLMULTI) {
638 for (i = 0; i < SPIDER_NET_MULTICAST_HASHES; i++) {
639 set_bit(i, bitmask);
641 goto write_hash;
644 /* well, we know, what the broadcast hash value is: it's xfd
645 hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */
646 set_bit(0xfd, bitmask);
648 for (mc = netdev->mc_list; mc; mc = mc->next) {
649 hash = spider_net_get_multicast_hash(netdev, mc->dmi_addr);
650 set_bit(hash, bitmask);
653 write_hash:
654 for (i = 0; i < SPIDER_NET_MULTICAST_HASHES / 4; i++) {
655 reg = 0;
656 if (test_bit(i * 4, bitmask))
657 reg += 0x08;
658 reg <<= 8;
659 if (test_bit(i * 4 + 1, bitmask))
660 reg += 0x08;
661 reg <<= 8;
662 if (test_bit(i * 4 + 2, bitmask))
663 reg += 0x08;
664 reg <<= 8;
665 if (test_bit(i * 4 + 3, bitmask))
666 reg += 0x08;
668 spider_net_write_reg(card, SPIDER_NET_GMRMHFILnR + i * 4, reg);
673 * spider_net_prepare_tx_descr - fill tx descriptor with skb data
674 * @card: card structure
675 * @skb: packet to use
677 * returns 0 on success, <0 on failure.
679 * fills out the descriptor structure with skb data and len. Copies data,
680 * if needed (32bit DMA!)
682 static int
683 spider_net_prepare_tx_descr(struct spider_net_card *card,
684 struct sk_buff *skb)
686 struct spider_net_descr_chain *chain = &card->tx_chain;
687 struct spider_net_descr *descr;
688 struct spider_net_hw_descr *hwdescr;
689 dma_addr_t buf;
690 unsigned long flags;
692 buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
693 if (pci_dma_mapping_error(card->pdev, buf)) {
694 if (netif_msg_tx_err(card) && net_ratelimit())
695 dev_err(&card->netdev->dev, "could not iommu-map packet (%p, %i). "
696 "Dropping packet\n", skb->data, skb->len);
697 card->spider_stats.tx_iommu_map_error++;
698 return -ENOMEM;
701 spin_lock_irqsave(&chain->lock, flags);
702 descr = card->tx_chain.head;
703 if (descr->next == chain->tail->prev) {
704 spin_unlock_irqrestore(&chain->lock, flags);
705 pci_unmap_single(card->pdev, buf, skb->len, PCI_DMA_TODEVICE);
706 return -ENOMEM;
708 hwdescr = descr->hwdescr;
709 chain->head = descr->next;
711 descr->skb = skb;
712 hwdescr->buf_addr = buf;
713 hwdescr->buf_size = skb->len;
714 hwdescr->next_descr_addr = 0;
715 hwdescr->data_status = 0;
717 hwdescr->dmac_cmd_status =
718 SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_TXFRMTL;
719 spin_unlock_irqrestore(&chain->lock, flags);
721 if (skb->ip_summed == CHECKSUM_PARTIAL)
722 switch (ip_hdr(skb)->protocol) {
723 case IPPROTO_TCP:
724 hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_TCP;
725 break;
726 case IPPROTO_UDP:
727 hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_UDP;
728 break;
731 /* Chain the bus address, so that the DMA engine finds this descr. */
732 wmb();
733 descr->prev->hwdescr->next_descr_addr = descr->bus_addr;
735 card->netdev->trans_start = jiffies; /* set netdev watchdog timer */
736 return 0;
739 static int
740 spider_net_set_low_watermark(struct spider_net_card *card)
742 struct spider_net_descr *descr = card->tx_chain.tail;
743 struct spider_net_hw_descr *hwdescr;
744 unsigned long flags;
745 int status;
746 int cnt=0;
747 int i;
749 /* Measure the length of the queue. Measurement does not
750 * need to be precise -- does not need a lock. */
751 while (descr != card->tx_chain.head) {
752 status = descr->hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_NOT_IN_USE;
753 if (status == SPIDER_NET_DESCR_NOT_IN_USE)
754 break;
755 descr = descr->next;
756 cnt++;
759 /* If TX queue is short, don't even bother with interrupts */
760 if (cnt < card->tx_chain.num_desc/4)
761 return cnt;
763 /* Set low-watermark 3/4th's of the way into the queue. */
764 descr = card->tx_chain.tail;
765 cnt = (cnt*3)/4;
766 for (i=0;i<cnt; i++)
767 descr = descr->next;
769 /* Set the new watermark, clear the old watermark */
770 spin_lock_irqsave(&card->tx_chain.lock, flags);
771 descr->hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_TXDESFLG;
772 if (card->low_watermark && card->low_watermark != descr) {
773 hwdescr = card->low_watermark->hwdescr;
774 hwdescr->dmac_cmd_status =
775 hwdescr->dmac_cmd_status & ~SPIDER_NET_DESCR_TXDESFLG;
777 card->low_watermark = descr;
778 spin_unlock_irqrestore(&card->tx_chain.lock, flags);
779 return cnt;
783 * spider_net_release_tx_chain - processes sent tx descriptors
784 * @card: adapter structure
785 * @brutal: if set, don't care about whether descriptor seems to be in use
787 * returns 0 if the tx ring is empty, otherwise 1.
789 * spider_net_release_tx_chain releases the tx descriptors that spider has
790 * finished with (if non-brutal) or simply release tx descriptors (if brutal).
791 * If some other context is calling this function, we return 1 so that we're
792 * scheduled again (if we were scheduled) and will not loose initiative.
794 static int
795 spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
797 struct net_device *dev = card->netdev;
798 struct spider_net_descr_chain *chain = &card->tx_chain;
799 struct spider_net_descr *descr;
800 struct spider_net_hw_descr *hwdescr;
801 struct sk_buff *skb;
802 u32 buf_addr;
803 unsigned long flags;
804 int status;
806 while (1) {
807 spin_lock_irqsave(&chain->lock, flags);
808 if (chain->tail == chain->head) {
809 spin_unlock_irqrestore(&chain->lock, flags);
810 return 0;
812 descr = chain->tail;
813 hwdescr = descr->hwdescr;
815 status = spider_net_get_descr_status(hwdescr);
816 switch (status) {
817 case SPIDER_NET_DESCR_COMPLETE:
818 dev->stats.tx_packets++;
819 dev->stats.tx_bytes += descr->skb->len;
820 break;
822 case SPIDER_NET_DESCR_CARDOWNED:
823 if (!brutal) {
824 spin_unlock_irqrestore(&chain->lock, flags);
825 return 1;
828 /* fallthrough, if we release the descriptors
829 * brutally (then we don't care about
830 * SPIDER_NET_DESCR_CARDOWNED) */
832 case SPIDER_NET_DESCR_RESPONSE_ERROR:
833 case SPIDER_NET_DESCR_PROTECTION_ERROR:
834 case SPIDER_NET_DESCR_FORCE_END:
835 if (netif_msg_tx_err(card))
836 dev_err(&card->netdev->dev, "forcing end of tx descriptor "
837 "with status x%02x\n", status);
838 dev->stats.tx_errors++;
839 break;
841 default:
842 dev->stats.tx_dropped++;
843 if (!brutal) {
844 spin_unlock_irqrestore(&chain->lock, flags);
845 return 1;
849 chain->tail = descr->next;
850 hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_NOT_IN_USE;
851 skb = descr->skb;
852 descr->skb = NULL;
853 buf_addr = hwdescr->buf_addr;
854 spin_unlock_irqrestore(&chain->lock, flags);
856 /* unmap the skb */
857 if (skb) {
858 pci_unmap_single(card->pdev, buf_addr, skb->len,
859 PCI_DMA_TODEVICE);
860 dev_kfree_skb(skb);
863 return 0;
867 * spider_net_kick_tx_dma - enables TX DMA processing
868 * @card: card structure
870 * This routine will start the transmit DMA running if
871 * it is not already running. This routine ned only be
872 * called when queueing a new packet to an empty tx queue.
873 * Writes the current tx chain head as start address
874 * of the tx descriptor chain and enables the transmission
875 * DMA engine.
877 static inline void
878 spider_net_kick_tx_dma(struct spider_net_card *card)
880 struct spider_net_descr *descr;
882 if (spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR) &
883 SPIDER_NET_TX_DMA_EN)
884 goto out;
886 descr = card->tx_chain.tail;
887 for (;;) {
888 if (spider_net_get_descr_status(descr->hwdescr) ==
889 SPIDER_NET_DESCR_CARDOWNED) {
890 spider_net_write_reg(card, SPIDER_NET_GDTDCHA,
891 descr->bus_addr);
892 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
893 SPIDER_NET_DMA_TX_VALUE);
894 break;
896 if (descr == card->tx_chain.head)
897 break;
898 descr = descr->next;
901 out:
902 mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER);
906 * spider_net_xmit - transmits a frame over the device
907 * @skb: packet to send out
908 * @netdev: interface device structure
910 * returns 0 on success, !0 on failure
912 static int
913 spider_net_xmit(struct sk_buff *skb, struct net_device *netdev)
915 int cnt;
916 struct spider_net_card *card = netdev_priv(netdev);
918 spider_net_release_tx_chain(card, 0);
920 if (spider_net_prepare_tx_descr(card, skb) != 0) {
921 netdev->stats.tx_dropped++;
922 netif_stop_queue(netdev);
923 return NETDEV_TX_BUSY;
926 cnt = spider_net_set_low_watermark(card);
927 if (cnt < 5)
928 spider_net_kick_tx_dma(card);
929 return NETDEV_TX_OK;
933 * spider_net_cleanup_tx_ring - cleans up the TX ring
934 * @card: card structure
936 * spider_net_cleanup_tx_ring is called by either the tx_timer
937 * or from the NAPI polling routine.
938 * This routine releases resources associted with transmitted
939 * packets, including updating the queue tail pointer.
941 static void
942 spider_net_cleanup_tx_ring(struct spider_net_card *card)
944 if ((spider_net_release_tx_chain(card, 0) != 0) &&
945 (card->netdev->flags & IFF_UP)) {
946 spider_net_kick_tx_dma(card);
947 netif_wake_queue(card->netdev);
952 * spider_net_do_ioctl - called for device ioctls
953 * @netdev: interface device structure
954 * @ifr: request parameter structure for ioctl
955 * @cmd: command code for ioctl
957 * returns 0 on success, <0 on failure. Currently, we have no special ioctls.
958 * -EOPNOTSUPP is returned, if an unknown ioctl was requested
960 static int
961 spider_net_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
963 switch (cmd) {
964 default:
965 return -EOPNOTSUPP;
970 * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on
971 * @descr: descriptor to process
972 * @card: card structure
974 * Fills out skb structure and passes the data to the stack.
975 * The descriptor state is not changed.
977 static void
978 spider_net_pass_skb_up(struct spider_net_descr *descr,
979 struct spider_net_card *card)
981 struct spider_net_hw_descr *hwdescr = descr->hwdescr;
982 struct sk_buff *skb = descr->skb;
983 struct net_device *netdev = card->netdev;
984 u32 data_status = hwdescr->data_status;
985 u32 data_error = hwdescr->data_error;
987 skb_put(skb, hwdescr->valid_size);
989 /* the card seems to add 2 bytes of junk in front
990 * of the ethernet frame */
991 #define SPIDER_MISALIGN 2
992 skb_pull(skb, SPIDER_MISALIGN);
993 skb->protocol = eth_type_trans(skb, netdev);
995 /* checksum offload */
996 if (card->options.rx_csum) {
997 if ( ( (data_status & SPIDER_NET_DATA_STATUS_CKSUM_MASK) ==
998 SPIDER_NET_DATA_STATUS_CKSUM_MASK) &&
999 !(data_error & SPIDER_NET_DATA_ERR_CKSUM_MASK))
1000 skb->ip_summed = CHECKSUM_UNNECESSARY;
1001 else
1002 skb->ip_summed = CHECKSUM_NONE;
1003 } else
1004 skb->ip_summed = CHECKSUM_NONE;
1006 if (data_status & SPIDER_NET_VLAN_PACKET) {
1007 /* further enhancements: HW-accel VLAN
1008 * vlan_hwaccel_receive_skb
1012 /* update netdevice statistics */
1013 netdev->stats.rx_packets++;
1014 netdev->stats.rx_bytes += skb->len;
1016 /* pass skb up to stack */
1017 netif_receive_skb(skb);
1020 static void show_rx_chain(struct spider_net_card *card)
1022 struct spider_net_descr_chain *chain = &card->rx_chain;
1023 struct spider_net_descr *start= chain->tail;
1024 struct spider_net_descr *descr= start;
1025 struct spider_net_hw_descr *hwd = start->hwdescr;
1026 struct device *dev = &card->netdev->dev;
1027 u32 curr_desc, next_desc;
1028 int status;
1030 int tot = 0;
1031 int cnt = 0;
1032 int off = start - chain->ring;
1033 int cstat = hwd->dmac_cmd_status;
1035 dev_info(dev, "Total number of descrs=%d\n",
1036 chain->num_desc);
1037 dev_info(dev, "Chain tail located at descr=%d, status=0x%x\n",
1038 off, cstat);
1040 curr_desc = spider_net_read_reg(card, SPIDER_NET_GDACTDPA);
1041 next_desc = spider_net_read_reg(card, SPIDER_NET_GDACNEXTDA);
1043 status = cstat;
1046 hwd = descr->hwdescr;
1047 off = descr - chain->ring;
1048 status = hwd->dmac_cmd_status;
1050 if (descr == chain->head)
1051 dev_info(dev, "Chain head is at %d, head status=0x%x\n",
1052 off, status);
1054 if (curr_desc == descr->bus_addr)
1055 dev_info(dev, "HW curr desc (GDACTDPA) is at %d, status=0x%x\n",
1056 off, status);
1058 if (next_desc == descr->bus_addr)
1059 dev_info(dev, "HW next desc (GDACNEXTDA) is at %d, status=0x%x\n",
1060 off, status);
1062 if (hwd->next_descr_addr == 0)
1063 dev_info(dev, "chain is cut at %d\n", off);
1065 if (cstat != status) {
1066 int from = (chain->num_desc + off - cnt) % chain->num_desc;
1067 int to = (chain->num_desc + off - 1) % chain->num_desc;
1068 dev_info(dev, "Have %d (from %d to %d) descrs "
1069 "with stat=0x%08x\n", cnt, from, to, cstat);
1070 cstat = status;
1071 cnt = 0;
1074 cnt ++;
1075 tot ++;
1076 descr = descr->next;
1077 } while (descr != start);
1079 dev_info(dev, "Last %d descrs with stat=0x%08x "
1080 "for a total of %d descrs\n", cnt, cstat, tot);
1082 #ifdef DEBUG
1083 /* Now dump the whole ring */
1084 descr = start;
1087 struct spider_net_hw_descr *hwd = descr->hwdescr;
1088 status = spider_net_get_descr_status(hwd);
1089 cnt = descr - chain->ring;
1090 dev_info(dev, "Descr %d stat=0x%08x skb=%p\n",
1091 cnt, status, descr->skb);
1092 dev_info(dev, "bus addr=%08x buf addr=%08x sz=%d\n",
1093 descr->bus_addr, hwd->buf_addr, hwd->buf_size);
1094 dev_info(dev, "next=%08x result sz=%d valid sz=%d\n",
1095 hwd->next_descr_addr, hwd->result_size,
1096 hwd->valid_size);
1097 dev_info(dev, "dmac=%08x data stat=%08x data err=%08x\n",
1098 hwd->dmac_cmd_status, hwd->data_status,
1099 hwd->data_error);
1100 dev_info(dev, "\n");
1102 descr = descr->next;
1103 } while (descr != start);
1104 #endif
1109 * spider_net_resync_head_ptr - Advance head ptr past empty descrs
1111 * If the driver fails to keep up and empty the queue, then the
1112 * hardware wil run out of room to put incoming packets. This
1113 * will cause the hardware to skip descrs that are full (instead
1114 * of halting/retrying). Thus, once the driver runs, it wil need
1115 * to "catch up" to where the hardware chain pointer is at.
1117 static void spider_net_resync_head_ptr(struct spider_net_card *card)
1119 unsigned long flags;
1120 struct spider_net_descr_chain *chain = &card->rx_chain;
1121 struct spider_net_descr *descr;
1122 int i, status;
1124 /* Advance head pointer past any empty descrs */
1125 descr = chain->head;
1126 status = spider_net_get_descr_status(descr->hwdescr);
1128 if (status == SPIDER_NET_DESCR_NOT_IN_USE)
1129 return;
1131 spin_lock_irqsave(&chain->lock, flags);
1133 descr = chain->head;
1134 status = spider_net_get_descr_status(descr->hwdescr);
1135 for (i=0; i<chain->num_desc; i++) {
1136 if (status != SPIDER_NET_DESCR_CARDOWNED) break;
1137 descr = descr->next;
1138 status = spider_net_get_descr_status(descr->hwdescr);
1140 chain->head = descr;
1142 spin_unlock_irqrestore(&chain->lock, flags);
1145 static int spider_net_resync_tail_ptr(struct spider_net_card *card)
1147 struct spider_net_descr_chain *chain = &card->rx_chain;
1148 struct spider_net_descr *descr;
1149 int i, status;
1151 /* Advance tail pointer past any empty and reaped descrs */
1152 descr = chain->tail;
1153 status = spider_net_get_descr_status(descr->hwdescr);
1155 for (i=0; i<chain->num_desc; i++) {
1156 if ((status != SPIDER_NET_DESCR_CARDOWNED) &&
1157 (status != SPIDER_NET_DESCR_NOT_IN_USE)) break;
1158 descr = descr->next;
1159 status = spider_net_get_descr_status(descr->hwdescr);
1161 chain->tail = descr;
1163 if ((i == chain->num_desc) || (i == 0))
1164 return 1;
1165 return 0;
1169 * spider_net_decode_one_descr - processes an RX descriptor
1170 * @card: card structure
1172 * Returns 1 if a packet has been sent to the stack, otherwise 0.
1174 * Processes an RX descriptor by iommu-unmapping the data buffer
1175 * and passing the packet up to the stack. This function is called
1176 * in softirq context, e.g. either bottom half from interrupt or
1177 * NAPI polling context.
1179 static int
1180 spider_net_decode_one_descr(struct spider_net_card *card)
1182 struct net_device *dev = card->netdev;
1183 struct spider_net_descr_chain *chain = &card->rx_chain;
1184 struct spider_net_descr *descr = chain->tail;
1185 struct spider_net_hw_descr *hwdescr = descr->hwdescr;
1186 u32 hw_buf_addr;
1187 int status;
1189 status = spider_net_get_descr_status(hwdescr);
1191 /* Nothing in the descriptor, or ring must be empty */
1192 if ((status == SPIDER_NET_DESCR_CARDOWNED) ||
1193 (status == SPIDER_NET_DESCR_NOT_IN_USE))
1194 return 0;
1196 /* descriptor definitively used -- move on tail */
1197 chain->tail = descr->next;
1199 /* unmap descriptor */
1200 hw_buf_addr = hwdescr->buf_addr;
1201 hwdescr->buf_addr = 0xffffffff;
1202 pci_unmap_single(card->pdev, hw_buf_addr,
1203 SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
1205 if ( (status == SPIDER_NET_DESCR_RESPONSE_ERROR) ||
1206 (status == SPIDER_NET_DESCR_PROTECTION_ERROR) ||
1207 (status == SPIDER_NET_DESCR_FORCE_END) ) {
1208 if (netif_msg_rx_err(card))
1209 dev_err(&dev->dev,
1210 "dropping RX descriptor with state %d\n", status);
1211 dev->stats.rx_dropped++;
1212 goto bad_desc;
1215 if ( (status != SPIDER_NET_DESCR_COMPLETE) &&
1216 (status != SPIDER_NET_DESCR_FRAME_END) ) {
1217 if (netif_msg_rx_err(card))
1218 dev_err(&card->netdev->dev,
1219 "RX descriptor with unknown state %d\n", status);
1220 card->spider_stats.rx_desc_unk_state++;
1221 goto bad_desc;
1224 /* The cases we'll throw away the packet immediately */
1225 if (hwdescr->data_error & SPIDER_NET_DESTROY_RX_FLAGS) {
1226 if (netif_msg_rx_err(card))
1227 dev_err(&card->netdev->dev,
1228 "error in received descriptor found, "
1229 "data_status=x%08x, data_error=x%08x\n",
1230 hwdescr->data_status, hwdescr->data_error);
1231 goto bad_desc;
1234 if (hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_BAD_STATUS) {
1235 dev_err(&card->netdev->dev, "bad status, cmd_status=x%08x\n",
1236 hwdescr->dmac_cmd_status);
1237 pr_err("buf_addr=x%08x\n", hw_buf_addr);
1238 pr_err("buf_size=x%08x\n", hwdescr->buf_size);
1239 pr_err("next_descr_addr=x%08x\n", hwdescr->next_descr_addr);
1240 pr_err("result_size=x%08x\n", hwdescr->result_size);
1241 pr_err("valid_size=x%08x\n", hwdescr->valid_size);
1242 pr_err("data_status=x%08x\n", hwdescr->data_status);
1243 pr_err("data_error=x%08x\n", hwdescr->data_error);
1244 pr_err("which=%ld\n", descr - card->rx_chain.ring);
1246 card->spider_stats.rx_desc_error++;
1247 goto bad_desc;
1250 /* Ok, we've got a packet in descr */
1251 spider_net_pass_skb_up(descr, card);
1252 descr->skb = NULL;
1253 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
1254 return 1;
1256 bad_desc:
1257 if (netif_msg_rx_err(card))
1258 show_rx_chain(card);
1259 dev_kfree_skb_irq(descr->skb);
1260 descr->skb = NULL;
1261 hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
1262 return 0;
1266 * spider_net_poll - NAPI poll function called by the stack to return packets
1267 * @netdev: interface device structure
1268 * @budget: number of packets we can pass to the stack at most
1270 * returns 0 if no more packets available to the driver/stack. Returns 1,
1271 * if the quota is exceeded, but the driver has still packets.
1273 * spider_net_poll returns all packets from the rx descriptors to the stack
1274 * (using netif_receive_skb). If all/enough packets are up, the driver
1275 * reenables interrupts and returns 0. If not, 1 is returned.
1277 static int spider_net_poll(struct napi_struct *napi, int budget)
1279 struct spider_net_card *card = container_of(napi, struct spider_net_card, napi);
1280 struct net_device *netdev = card->netdev;
1281 int packets_done = 0;
1283 while (packets_done < budget) {
1284 if (!spider_net_decode_one_descr(card))
1285 break;
1287 packets_done++;
1290 if ((packets_done == 0) && (card->num_rx_ints != 0)) {
1291 if (!spider_net_resync_tail_ptr(card))
1292 packets_done = budget;
1293 spider_net_resync_head_ptr(card);
1295 card->num_rx_ints = 0;
1297 spider_net_refill_rx_chain(card);
1298 spider_net_enable_rxdmac(card);
1300 spider_net_cleanup_tx_ring(card);
1302 /* if all packets are in the stack, enable interrupts and return 0 */
1303 /* if not, return 1 */
1304 if (packets_done < budget) {
1305 netif_rx_complete(netdev, napi);
1306 spider_net_rx_irq_on(card);
1307 card->ignore_rx_ramfull = 0;
1310 return packets_done;
1314 * spider_net_change_mtu - changes the MTU of an interface
1315 * @netdev: interface device structure
1316 * @new_mtu: new MTU value
1318 * returns 0 on success, <0 on failure
1320 static int
1321 spider_net_change_mtu(struct net_device *netdev, int new_mtu)
1323 /* no need to re-alloc skbs or so -- the max mtu is about 2.3k
1324 * and mtu is outbound only anyway */
1325 if ( (new_mtu < SPIDER_NET_MIN_MTU ) ||
1326 (new_mtu > SPIDER_NET_MAX_MTU) )
1327 return -EINVAL;
1328 netdev->mtu = new_mtu;
1329 return 0;
1333 * spider_net_set_mac - sets the MAC of an interface
1334 * @netdev: interface device structure
1335 * @ptr: pointer to new MAC address
1337 * Returns 0 on success, <0 on failure. Currently, we don't support this
1338 * and will always return EOPNOTSUPP.
1340 static int
1341 spider_net_set_mac(struct net_device *netdev, void *p)
1343 struct spider_net_card *card = netdev_priv(netdev);
1344 u32 macl, macu, regvalue;
1345 struct sockaddr *addr = p;
1347 if (!is_valid_ether_addr(addr->sa_data))
1348 return -EADDRNOTAVAIL;
1350 /* switch off GMACTPE and GMACRPE */
1351 regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
1352 regvalue &= ~((1 << 5) | (1 << 6));
1353 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
1355 /* write mac */
1356 macu = (addr->sa_data[0]<<24) + (addr->sa_data[1]<<16) +
1357 (addr->sa_data[2]<<8) + (addr->sa_data[3]);
1358 macl = (addr->sa_data[4]<<8) + (addr->sa_data[5]);
1359 spider_net_write_reg(card, SPIDER_NET_GMACUNIMACU, macu);
1360 spider_net_write_reg(card, SPIDER_NET_GMACUNIMACL, macl);
1362 /* switch GMACTPE and GMACRPE back on */
1363 regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
1364 regvalue |= ((1 << 5) | (1 << 6));
1365 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
1367 spider_net_set_promisc(card);
1369 /* look up, whether we have been successful */
1370 if (spider_net_get_mac_address(netdev))
1371 return -EADDRNOTAVAIL;
1372 if (memcmp(netdev->dev_addr,addr->sa_data,netdev->addr_len))
1373 return -EADDRNOTAVAIL;
1375 return 0;
1379 * spider_net_link_reset
1380 * @netdev: net device structure
1382 * This is called when the PHY_LINK signal is asserted. For the blade this is
1383 * not connected so we should never get here.
1386 static void
1387 spider_net_link_reset(struct net_device *netdev)
1390 struct spider_net_card *card = netdev_priv(netdev);
1392 del_timer_sync(&card->aneg_timer);
1394 /* clear interrupt, block further interrupts */
1395 spider_net_write_reg(card, SPIDER_NET_GMACST,
1396 spider_net_read_reg(card, SPIDER_NET_GMACST));
1397 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
1399 /* reset phy and setup aneg */
1400 card->aneg_count = 0;
1401 card->medium = BCM54XX_COPPER;
1402 spider_net_setup_aneg(card);
1403 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
1408 * spider_net_handle_error_irq - handles errors raised by an interrupt
1409 * @card: card structure
1410 * @status_reg: interrupt status register 0 (GHIINT0STS)
1412 * spider_net_handle_error_irq treats or ignores all error conditions
1413 * found when an interrupt is presented
1415 static void
1416 spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg,
1417 u32 error_reg1, u32 error_reg2)
1419 u32 i;
1420 int show_error = 1;
1422 /* check GHIINT0STS ************************************/
1423 if (status_reg)
1424 for (i = 0; i < 32; i++)
1425 if (status_reg & (1<<i))
1426 switch (i)
1428 /* let error_reg1 and error_reg2 evaluation decide, what to do
1429 case SPIDER_NET_PHYINT:
1430 case SPIDER_NET_GMAC2INT:
1431 case SPIDER_NET_GMAC1INT:
1432 case SPIDER_NET_GFIFOINT:
1433 case SPIDER_NET_DMACINT:
1434 case SPIDER_NET_GSYSINT:
1435 break; */
1437 case SPIDER_NET_GIPSINT:
1438 show_error = 0;
1439 break;
1441 case SPIDER_NET_GPWOPCMPINT:
1442 /* PHY write operation completed */
1443 show_error = 0;
1444 break;
1445 case SPIDER_NET_GPROPCMPINT:
1446 /* PHY read operation completed */
1447 /* we don't use semaphores, as we poll for the completion
1448 * of the read operation in spider_net_read_phy. Should take
1449 * about 50 us */
1450 show_error = 0;
1451 break;
1452 case SPIDER_NET_GPWFFINT:
1453 /* PHY command queue full */
1454 if (netif_msg_intr(card))
1455 dev_err(&card->netdev->dev, "PHY write queue full\n");
1456 show_error = 0;
1457 break;
1459 /* case SPIDER_NET_GRMDADRINT: not used. print a message */
1460 /* case SPIDER_NET_GRMARPINT: not used. print a message */
1461 /* case SPIDER_NET_GRMMPINT: not used. print a message */
1463 case SPIDER_NET_GDTDEN0INT:
1464 /* someone has set TX_DMA_EN to 0 */
1465 show_error = 0;
1466 break;
1468 case SPIDER_NET_GDDDEN0INT: /* fallthrough */
1469 case SPIDER_NET_GDCDEN0INT: /* fallthrough */
1470 case SPIDER_NET_GDBDEN0INT: /* fallthrough */
1471 case SPIDER_NET_GDADEN0INT:
1472 /* someone has set RX_DMA_EN to 0 */
1473 show_error = 0;
1474 break;
1476 /* RX interrupts */
1477 case SPIDER_NET_GDDFDCINT:
1478 case SPIDER_NET_GDCFDCINT:
1479 case SPIDER_NET_GDBFDCINT:
1480 case SPIDER_NET_GDAFDCINT:
1481 /* case SPIDER_NET_GDNMINT: not used. print a message */
1482 /* case SPIDER_NET_GCNMINT: not used. print a message */
1483 /* case SPIDER_NET_GBNMINT: not used. print a message */
1484 /* case SPIDER_NET_GANMINT: not used. print a message */
1485 /* case SPIDER_NET_GRFNMINT: not used. print a message */
1486 show_error = 0;
1487 break;
1489 /* TX interrupts */
1490 case SPIDER_NET_GDTFDCINT:
1491 show_error = 0;
1492 break;
1493 case SPIDER_NET_GTTEDINT:
1494 show_error = 0;
1495 break;
1496 case SPIDER_NET_GDTDCEINT:
1497 /* chain end. If a descriptor should be sent, kick off
1498 * tx dma
1499 if (card->tx_chain.tail != card->tx_chain.head)
1500 spider_net_kick_tx_dma(card);
1502 show_error = 0;
1503 break;
1505 /* case SPIDER_NET_G1TMCNTINT: not used. print a message */
1506 /* case SPIDER_NET_GFREECNTINT: not used. print a message */
1509 /* check GHIINT1STS ************************************/
1510 if (error_reg1)
1511 for (i = 0; i < 32; i++)
1512 if (error_reg1 & (1<<i))
1513 switch (i)
1515 case SPIDER_NET_GTMFLLINT:
1516 /* TX RAM full may happen on a usual case.
1517 * Logging is not needed. */
1518 show_error = 0;
1519 break;
1520 case SPIDER_NET_GRFDFLLINT: /* fallthrough */
1521 case SPIDER_NET_GRFCFLLINT: /* fallthrough */
1522 case SPIDER_NET_GRFBFLLINT: /* fallthrough */
1523 case SPIDER_NET_GRFAFLLINT: /* fallthrough */
1524 case SPIDER_NET_GRMFLLINT:
1525 /* Could happen when rx chain is full */
1526 if (card->ignore_rx_ramfull == 0) {
1527 card->ignore_rx_ramfull = 1;
1528 spider_net_resync_head_ptr(card);
1529 spider_net_refill_rx_chain(card);
1530 spider_net_enable_rxdmac(card);
1531 card->num_rx_ints ++;
1532 netif_rx_schedule(card->netdev,
1533 &card->napi);
1535 show_error = 0;
1536 break;
1538 /* case SPIDER_NET_GTMSHTINT: problem, print a message */
1539 case SPIDER_NET_GDTINVDINT:
1540 /* allrighty. tx from previous descr ok */
1541 show_error = 0;
1542 break;
1544 /* chain end */
1545 case SPIDER_NET_GDDDCEINT: /* fallthrough */
1546 case SPIDER_NET_GDCDCEINT: /* fallthrough */
1547 case SPIDER_NET_GDBDCEINT: /* fallthrough */
1548 case SPIDER_NET_GDADCEINT:
1549 spider_net_resync_head_ptr(card);
1550 spider_net_refill_rx_chain(card);
1551 spider_net_enable_rxdmac(card);
1552 card->num_rx_ints ++;
1553 netif_rx_schedule(card->netdev,
1554 &card->napi);
1555 show_error = 0;
1556 break;
1558 /* invalid descriptor */
1559 case SPIDER_NET_GDDINVDINT: /* fallthrough */
1560 case SPIDER_NET_GDCINVDINT: /* fallthrough */
1561 case SPIDER_NET_GDBINVDINT: /* fallthrough */
1562 case SPIDER_NET_GDAINVDINT:
1563 /* Could happen when rx chain is full */
1564 spider_net_resync_head_ptr(card);
1565 spider_net_refill_rx_chain(card);
1566 spider_net_enable_rxdmac(card);
1567 card->num_rx_ints ++;
1568 netif_rx_schedule(card->netdev,
1569 &card->napi);
1570 show_error = 0;
1571 break;
1573 /* case SPIDER_NET_GDTRSERINT: problem, print a message */
1574 /* case SPIDER_NET_GDDRSERINT: problem, print a message */
1575 /* case SPIDER_NET_GDCRSERINT: problem, print a message */
1576 /* case SPIDER_NET_GDBRSERINT: problem, print a message */
1577 /* case SPIDER_NET_GDARSERINT: problem, print a message */
1578 /* case SPIDER_NET_GDSERINT: problem, print a message */
1579 /* case SPIDER_NET_GDTPTERINT: problem, print a message */
1580 /* case SPIDER_NET_GDDPTERINT: problem, print a message */
1581 /* case SPIDER_NET_GDCPTERINT: problem, print a message */
1582 /* case SPIDER_NET_GDBPTERINT: problem, print a message */
1583 /* case SPIDER_NET_GDAPTERINT: problem, print a message */
1584 default:
1585 show_error = 1;
1586 break;
1589 /* check GHIINT2STS ************************************/
1590 if (error_reg2)
1591 for (i = 0; i < 32; i++)
1592 if (error_reg2 & (1<<i))
1593 switch (i)
1595 /* there is nothing we can (want to) do at this time. Log a
1596 * message, we can switch on and off the specific values later on
1597 case SPIDER_NET_GPROPERINT:
1598 case SPIDER_NET_GMCTCRSNGINT:
1599 case SPIDER_NET_GMCTLCOLINT:
1600 case SPIDER_NET_GMCTTMOTINT:
1601 case SPIDER_NET_GMCRCAERINT:
1602 case SPIDER_NET_GMCRCALERINT:
1603 case SPIDER_NET_GMCRALNERINT:
1604 case SPIDER_NET_GMCROVRINT:
1605 case SPIDER_NET_GMCRRNTINT:
1606 case SPIDER_NET_GMCRRXERINT:
1607 case SPIDER_NET_GTITCSERINT:
1608 case SPIDER_NET_GTIFMTERINT:
1609 case SPIDER_NET_GTIPKTRVKINT:
1610 case SPIDER_NET_GTISPINGINT:
1611 case SPIDER_NET_GTISADNGINT:
1612 case SPIDER_NET_GTISPDNGINT:
1613 case SPIDER_NET_GRIFMTERINT:
1614 case SPIDER_NET_GRIPKTRVKINT:
1615 case SPIDER_NET_GRISPINGINT:
1616 case SPIDER_NET_GRISADNGINT:
1617 case SPIDER_NET_GRISPDNGINT:
1618 break;
1620 default:
1621 break;
1624 if ((show_error) && (netif_msg_intr(card)) && net_ratelimit())
1625 dev_err(&card->netdev->dev, "Error interrupt, GHIINT0STS = 0x%08x, "
1626 "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n",
1627 status_reg, error_reg1, error_reg2);
1629 /* clear interrupt sources */
1630 spider_net_write_reg(card, SPIDER_NET_GHIINT1STS, error_reg1);
1631 spider_net_write_reg(card, SPIDER_NET_GHIINT2STS, error_reg2);
1635 * spider_net_interrupt - interrupt handler for spider_net
1636 * @irq: interrupt number
1637 * @ptr: pointer to net_device
1639 * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
1640 * interrupt found raised by card.
1642 * This is the interrupt handler, that turns off
1643 * interrupts for this device and makes the stack poll the driver
1645 static irqreturn_t
1646 spider_net_interrupt(int irq, void *ptr)
1648 struct net_device *netdev = ptr;
1649 struct spider_net_card *card = netdev_priv(netdev);
1650 u32 status_reg, error_reg1, error_reg2;
1652 status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS);
1653 error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS);
1654 error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS);
1656 if (!(status_reg & SPIDER_NET_INT0_MASK_VALUE) &&
1657 !(error_reg1 & SPIDER_NET_INT1_MASK_VALUE) &&
1658 !(error_reg2 & SPIDER_NET_INT2_MASK_VALUE))
1659 return IRQ_NONE;
1661 if (status_reg & SPIDER_NET_RXINT ) {
1662 spider_net_rx_irq_off(card);
1663 netif_rx_schedule(netdev, &card->napi);
1664 card->num_rx_ints ++;
1666 if (status_reg & SPIDER_NET_TXINT)
1667 netif_rx_schedule(netdev, &card->napi);
1669 if (status_reg & SPIDER_NET_LINKINT)
1670 spider_net_link_reset(netdev);
1672 if (status_reg & SPIDER_NET_ERRINT )
1673 spider_net_handle_error_irq(card, status_reg,
1674 error_reg1, error_reg2);
1676 /* clear interrupt sources */
1677 spider_net_write_reg(card, SPIDER_NET_GHIINT0STS, status_reg);
1679 return IRQ_HANDLED;
1682 #ifdef CONFIG_NET_POLL_CONTROLLER
1684 * spider_net_poll_controller - artificial interrupt for netconsole etc.
1685 * @netdev: interface device structure
1687 * see Documentation/networking/netconsole.txt
1689 static void
1690 spider_net_poll_controller(struct net_device *netdev)
1692 disable_irq(netdev->irq);
1693 spider_net_interrupt(netdev->irq, netdev);
1694 enable_irq(netdev->irq);
1696 #endif /* CONFIG_NET_POLL_CONTROLLER */
1699 * spider_net_enable_interrupts - enable interrupts
1700 * @card: card structure
1702 * spider_net_enable_interrupt enables several interrupts
1704 static void
1705 spider_net_enable_interrupts(struct spider_net_card *card)
1707 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK,
1708 SPIDER_NET_INT0_MASK_VALUE);
1709 spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK,
1710 SPIDER_NET_INT1_MASK_VALUE);
1711 spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK,
1712 SPIDER_NET_INT2_MASK_VALUE);
1716 * spider_net_disable_interrupts - disable interrupts
1717 * @card: card structure
1719 * spider_net_disable_interrupts disables all the interrupts
1721 static void
1722 spider_net_disable_interrupts(struct spider_net_card *card)
1724 spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
1725 spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
1726 spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
1727 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
1731 * spider_net_init_card - initializes the card
1732 * @card: card structure
1734 * spider_net_init_card initializes the card so that other registers can
1735 * be used
1737 static void
1738 spider_net_init_card(struct spider_net_card *card)
1740 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
1741 SPIDER_NET_CKRCTRL_STOP_VALUE);
1743 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
1744 SPIDER_NET_CKRCTRL_RUN_VALUE);
1746 /* trigger ETOMOD signal */
1747 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
1748 spider_net_read_reg(card, SPIDER_NET_GMACOPEMD) | 0x4);
1750 spider_net_disable_interrupts(card);
1754 * spider_net_enable_card - enables the card by setting all kinds of regs
1755 * @card: card structure
1757 * spider_net_enable_card sets a lot of SMMIO registers to enable the device
1759 static void
1760 spider_net_enable_card(struct spider_net_card *card)
1762 int i;
1763 /* the following array consists of (register),(value) pairs
1764 * that are set in this function. A register of 0 ends the list */
1765 u32 regs[][2] = {
1766 { SPIDER_NET_GRESUMINTNUM, 0 },
1767 { SPIDER_NET_GREINTNUM, 0 },
1769 /* set interrupt frame number registers */
1770 /* clear the single DMA engine registers first */
1771 { SPIDER_NET_GFAFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1772 { SPIDER_NET_GFBFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1773 { SPIDER_NET_GFCFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1774 { SPIDER_NET_GFDFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1775 /* then set, what we really need */
1776 { SPIDER_NET_GFFRMNUM, SPIDER_NET_FRAMENUM_VALUE },
1778 /* timer counter registers and stuff */
1779 { SPIDER_NET_GFREECNNUM, 0 },
1780 { SPIDER_NET_GONETIMENUM, 0 },
1781 { SPIDER_NET_GTOUTFRMNUM, 0 },
1783 /* RX mode setting */
1784 { SPIDER_NET_GRXMDSET, SPIDER_NET_RXMODE_VALUE },
1785 /* TX mode setting */
1786 { SPIDER_NET_GTXMDSET, SPIDER_NET_TXMODE_VALUE },
1787 /* IPSEC mode setting */
1788 { SPIDER_NET_GIPSECINIT, SPIDER_NET_IPSECINIT_VALUE },
1790 { SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE },
1792 { SPIDER_NET_GMRWOLCTRL, 0 },
1793 { SPIDER_NET_GTESTMD, 0x10000000 },
1794 { SPIDER_NET_GTTQMSK, 0x00400040 },
1796 { SPIDER_NET_GMACINTEN, 0 },
1798 /* flow control stuff */
1799 { SPIDER_NET_GMACAPAUSE, SPIDER_NET_MACAPAUSE_VALUE },
1800 { SPIDER_NET_GMACTXPAUSE, SPIDER_NET_TXPAUSE_VALUE },
1802 { SPIDER_NET_GMACBSTLMT, SPIDER_NET_BURSTLMT_VALUE },
1803 { 0, 0}
1806 i = 0;
1807 while (regs[i][0]) {
1808 spider_net_write_reg(card, regs[i][0], regs[i][1]);
1809 i++;
1812 /* clear unicast filter table entries 1 to 14 */
1813 for (i = 1; i <= 14; i++) {
1814 spider_net_write_reg(card,
1815 SPIDER_NET_GMRUAFILnR + i * 8,
1816 0x00080000);
1817 spider_net_write_reg(card,
1818 SPIDER_NET_GMRUAFILnR + i * 8 + 4,
1819 0x00000000);
1822 spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, 0x08080000);
1824 spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
1826 /* set chain tail adress for RX chains and
1827 * enable DMA */
1828 spider_net_enable_rxchtails(card);
1829 spider_net_enable_rxdmac(card);
1831 spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE);
1833 spider_net_write_reg(card, SPIDER_NET_GMACLENLMT,
1834 SPIDER_NET_LENLMT_VALUE);
1835 spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
1836 SPIDER_NET_OPMODE_VALUE);
1838 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
1839 SPIDER_NET_GDTBSTA);
1843 * spider_net_download_firmware - loads firmware into the adapter
1844 * @card: card structure
1845 * @firmware_ptr: pointer to firmware data
1847 * spider_net_download_firmware loads the firmware data into the
1848 * adapter. It assumes the length etc. to be allright.
1850 static int
1851 spider_net_download_firmware(struct spider_net_card *card,
1852 const void *firmware_ptr)
1854 int sequencer, i;
1855 const u32 *fw_ptr = firmware_ptr;
1857 /* stop sequencers */
1858 spider_net_write_reg(card, SPIDER_NET_GSINIT,
1859 SPIDER_NET_STOP_SEQ_VALUE);
1861 for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
1862 sequencer++) {
1863 spider_net_write_reg(card,
1864 SPIDER_NET_GSnPRGADR + sequencer * 8, 0);
1865 for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
1866 spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
1867 sequencer * 8, *fw_ptr);
1868 fw_ptr++;
1872 if (spider_net_read_reg(card, SPIDER_NET_GSINIT))
1873 return -EIO;
1875 spider_net_write_reg(card, SPIDER_NET_GSINIT,
1876 SPIDER_NET_RUN_SEQ_VALUE);
1878 return 0;
1882 * spider_net_init_firmware - reads in firmware parts
1883 * @card: card structure
1885 * Returns 0 on success, <0 on failure
1887 * spider_net_init_firmware opens the sequencer firmware and does some basic
1888 * checks. This function opens and releases the firmware structure. A call
1889 * to download the firmware is performed before the release.
1891 * Firmware format
1892 * ===============
1893 * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being
1894 * the program for each sequencer. Use the command
1895 * tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \
1896 * Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \
1897 * Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin
1899 * to generate spider_fw.bin, if you have sequencer programs with something
1900 * like the following contents for each sequencer:
1901 * <ONE LINE COMMENT>
1902 * <FIRST 4-BYTES-WORD FOR SEQUENCER>
1903 * <SECOND 4-BYTES-WORD FOR SEQUENCER>
1904 * ...
1905 * <1024th 4-BYTES-WORD FOR SEQUENCER>
1907 static int
1908 spider_net_init_firmware(struct spider_net_card *card)
1910 struct firmware *firmware = NULL;
1911 struct device_node *dn;
1912 const u8 *fw_prop = NULL;
1913 int err = -ENOENT;
1914 int fw_size;
1916 if (request_firmware((const struct firmware **)&firmware,
1917 SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) == 0) {
1918 if ( (firmware->size != SPIDER_NET_FIRMWARE_LEN) &&
1919 netif_msg_probe(card) ) {
1920 dev_err(&card->netdev->dev,
1921 "Incorrect size of spidernet firmware in " \
1922 "filesystem. Looking in host firmware...\n");
1923 goto try_host_fw;
1925 err = spider_net_download_firmware(card, firmware->data);
1927 release_firmware(firmware);
1928 if (err)
1929 goto try_host_fw;
1931 goto done;
1934 try_host_fw:
1935 dn = pci_device_to_OF_node(card->pdev);
1936 if (!dn)
1937 goto out_err;
1939 fw_prop = of_get_property(dn, "firmware", &fw_size);
1940 if (!fw_prop)
1941 goto out_err;
1943 if ( (fw_size != SPIDER_NET_FIRMWARE_LEN) &&
1944 netif_msg_probe(card) ) {
1945 dev_err(&card->netdev->dev,
1946 "Incorrect size of spidernet firmware in host firmware\n");
1947 goto done;
1950 err = spider_net_download_firmware(card, fw_prop);
1952 done:
1953 return err;
1954 out_err:
1955 if (netif_msg_probe(card))
1956 dev_err(&card->netdev->dev,
1957 "Couldn't find spidernet firmware in filesystem " \
1958 "or host firmware\n");
1959 return err;
1963 * spider_net_open - called upon ifonfig up
1964 * @netdev: interface device structure
1966 * returns 0 on success, <0 on failure
1968 * spider_net_open allocates all the descriptors and memory needed for
1969 * operation, sets up multicast list and enables interrupts
1972 spider_net_open(struct net_device *netdev)
1974 struct spider_net_card *card = netdev_priv(netdev);
1975 int result;
1977 result = spider_net_init_firmware(card);
1978 if (result)
1979 goto init_firmware_failed;
1981 /* start probing with copper */
1982 card->aneg_count = 0;
1983 card->medium = BCM54XX_COPPER;
1984 spider_net_setup_aneg(card);
1985 if (card->phy.def->phy_id)
1986 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
1988 result = spider_net_init_chain(card, &card->tx_chain);
1989 if (result)
1990 goto alloc_tx_failed;
1991 card->low_watermark = NULL;
1993 result = spider_net_init_chain(card, &card->rx_chain);
1994 if (result)
1995 goto alloc_rx_failed;
1997 /* Allocate rx skbs */
1998 if (spider_net_alloc_rx_skbs(card))
1999 goto alloc_skbs_failed;
2001 spider_net_set_multi(netdev);
2003 /* further enhancement: setup hw vlan, if needed */
2005 result = -EBUSY;
2006 if (request_irq(netdev->irq, spider_net_interrupt,
2007 IRQF_SHARED, netdev->name, netdev))
2008 goto register_int_failed;
2010 spider_net_enable_card(card);
2012 netif_start_queue(netdev);
2013 netif_carrier_on(netdev);
2014 napi_enable(&card->napi);
2016 spider_net_enable_interrupts(card);
2018 return 0;
2020 register_int_failed:
2021 spider_net_free_rx_chain_contents(card);
2022 alloc_skbs_failed:
2023 spider_net_free_chain(card, &card->rx_chain);
2024 alloc_rx_failed:
2025 spider_net_free_chain(card, &card->tx_chain);
2026 alloc_tx_failed:
2027 del_timer_sync(&card->aneg_timer);
2028 init_firmware_failed:
2029 return result;
2033 * spider_net_link_phy
2034 * @data: used for pointer to card structure
2037 static void spider_net_link_phy(unsigned long data)
2039 struct spider_net_card *card = (struct spider_net_card *)data;
2040 struct mii_phy *phy = &card->phy;
2042 /* if link didn't come up after SPIDER_NET_ANEG_TIMEOUT tries, setup phy again */
2043 if (card->aneg_count > SPIDER_NET_ANEG_TIMEOUT) {
2045 pr_debug("%s: link is down trying to bring it up\n",
2046 card->netdev->name);
2048 switch (card->medium) {
2049 case BCM54XX_COPPER:
2050 /* enable fiber with autonegotiation first */
2051 if (phy->def->ops->enable_fiber)
2052 phy->def->ops->enable_fiber(phy, 1);
2053 card->medium = BCM54XX_FIBER;
2054 break;
2056 case BCM54XX_FIBER:
2057 /* fiber didn't come up, try to disable fiber autoneg */
2058 if (phy->def->ops->enable_fiber)
2059 phy->def->ops->enable_fiber(phy, 0);
2060 card->medium = BCM54XX_UNKNOWN;
2061 break;
2063 case BCM54XX_UNKNOWN:
2064 /* copper, fiber with and without failed,
2065 * retry from beginning */
2066 spider_net_setup_aneg(card);
2067 card->medium = BCM54XX_COPPER;
2068 break;
2071 card->aneg_count = 0;
2072 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
2073 return;
2076 /* link still not up, try again later */
2077 if (!(phy->def->ops->poll_link(phy))) {
2078 card->aneg_count++;
2079 mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
2080 return;
2083 /* link came up, get abilities */
2084 phy->def->ops->read_link(phy);
2086 spider_net_write_reg(card, SPIDER_NET_GMACST,
2087 spider_net_read_reg(card, SPIDER_NET_GMACST));
2088 spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0x4);
2090 if (phy->speed == 1000)
2091 spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0x00000001);
2092 else
2093 spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0);
2095 card->aneg_count = 0;
2097 pr_info("%s: link up, %i Mbps, %s-duplex %sautoneg.\n",
2098 card->netdev->name, phy->speed,
2099 phy->duplex == 1 ? "Full" : "Half",
2100 phy->autoneg == 1 ? "" : "no ");
2102 return;
2106 * spider_net_setup_phy - setup PHY
2107 * @card: card structure
2109 * returns 0 on success, <0 on failure
2111 * spider_net_setup_phy is used as part of spider_net_probe.
2113 static int
2114 spider_net_setup_phy(struct spider_net_card *card)
2116 struct mii_phy *phy = &card->phy;
2118 spider_net_write_reg(card, SPIDER_NET_GDTDMASEL,
2119 SPIDER_NET_DMASEL_VALUE);
2120 spider_net_write_reg(card, SPIDER_NET_GPCCTRL,
2121 SPIDER_NET_PHY_CTRL_VALUE);
2123 phy->dev = card->netdev;
2124 phy->mdio_read = spider_net_read_phy;
2125 phy->mdio_write = spider_net_write_phy;
2127 for (phy->mii_id = 1; phy->mii_id <= 31; phy->mii_id++) {
2128 unsigned short id;
2129 id = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
2130 if (id != 0x0000 && id != 0xffff) {
2131 if (!mii_phy_probe(phy, phy->mii_id)) {
2132 pr_info("Found %s.\n", phy->def->name);
2133 break;
2138 return 0;
2142 * spider_net_workaround_rxramfull - work around firmware bug
2143 * @card: card structure
2145 * no return value
2147 static void
2148 spider_net_workaround_rxramfull(struct spider_net_card *card)
2150 int i, sequencer = 0;
2152 /* cancel reset */
2153 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2154 SPIDER_NET_CKRCTRL_RUN_VALUE);
2156 /* empty sequencer data */
2157 for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
2158 sequencer++) {
2159 spider_net_write_reg(card, SPIDER_NET_GSnPRGADR +
2160 sequencer * 8, 0x0);
2161 for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
2162 spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
2163 sequencer * 8, 0x0);
2167 /* set sequencer operation */
2168 spider_net_write_reg(card, SPIDER_NET_GSINIT, 0x000000fe);
2170 /* reset */
2171 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2172 SPIDER_NET_CKRCTRL_STOP_VALUE);
2176 * spider_net_stop - called upon ifconfig down
2177 * @netdev: interface device structure
2179 * always returns 0
2182 spider_net_stop(struct net_device *netdev)
2184 struct spider_net_card *card = netdev_priv(netdev);
2186 napi_disable(&card->napi);
2187 netif_carrier_off(netdev);
2188 netif_stop_queue(netdev);
2189 del_timer_sync(&card->tx_timer);
2190 del_timer_sync(&card->aneg_timer);
2192 spider_net_disable_interrupts(card);
2194 free_irq(netdev->irq, netdev);
2196 spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
2197 SPIDER_NET_DMA_TX_FEND_VALUE);
2199 /* turn off DMA, force end */
2200 spider_net_disable_rxdmac(card);
2202 /* release chains */
2203 spider_net_release_tx_chain(card, 1);
2204 spider_net_free_rx_chain_contents(card);
2206 spider_net_free_chain(card, &card->tx_chain);
2207 spider_net_free_chain(card, &card->rx_chain);
2209 return 0;
2213 * spider_net_tx_timeout_task - task scheduled by the watchdog timeout
2214 * function (to be called not under interrupt status)
2215 * @data: data, is interface device structure
2217 * called as task when tx hangs, resets interface (if interface is up)
2219 static void
2220 spider_net_tx_timeout_task(struct work_struct *work)
2222 struct spider_net_card *card =
2223 container_of(work, struct spider_net_card, tx_timeout_task);
2224 struct net_device *netdev = card->netdev;
2226 if (!(netdev->flags & IFF_UP))
2227 goto out;
2229 netif_device_detach(netdev);
2230 spider_net_stop(netdev);
2232 spider_net_workaround_rxramfull(card);
2233 spider_net_init_card(card);
2235 if (spider_net_setup_phy(card))
2236 goto out;
2238 spider_net_open(netdev);
2239 spider_net_kick_tx_dma(card);
2240 netif_device_attach(netdev);
2242 out:
2243 atomic_dec(&card->tx_timeout_task_counter);
2247 * spider_net_tx_timeout - called when the tx timeout watchdog kicks in.
2248 * @netdev: interface device structure
2250 * called, if tx hangs. Schedules a task that resets the interface
2252 static void
2253 spider_net_tx_timeout(struct net_device *netdev)
2255 struct spider_net_card *card;
2257 card = netdev_priv(netdev);
2258 atomic_inc(&card->tx_timeout_task_counter);
2259 if (netdev->flags & IFF_UP)
2260 schedule_work(&card->tx_timeout_task);
2261 else
2262 atomic_dec(&card->tx_timeout_task_counter);
2263 card->spider_stats.tx_timeouts++;
2267 * spider_net_setup_netdev_ops - initialization of net_device operations
2268 * @netdev: net_device structure
2270 * fills out function pointers in the net_device structure
2272 static void
2273 spider_net_setup_netdev_ops(struct net_device *netdev)
2275 netdev->open = &spider_net_open;
2276 netdev->stop = &spider_net_stop;
2277 netdev->hard_start_xmit = &spider_net_xmit;
2278 netdev->set_multicast_list = &spider_net_set_multi;
2279 netdev->set_mac_address = &spider_net_set_mac;
2280 netdev->change_mtu = &spider_net_change_mtu;
2281 netdev->do_ioctl = &spider_net_do_ioctl;
2282 /* tx watchdog */
2283 netdev->tx_timeout = &spider_net_tx_timeout;
2284 netdev->watchdog_timeo = SPIDER_NET_WATCHDOG_TIMEOUT;
2285 /* HW VLAN */
2286 #ifdef CONFIG_NET_POLL_CONTROLLER
2287 /* poll controller */
2288 netdev->poll_controller = &spider_net_poll_controller;
2289 #endif /* CONFIG_NET_POLL_CONTROLLER */
2290 /* ethtool ops */
2291 netdev->ethtool_ops = &spider_net_ethtool_ops;
2295 * spider_net_setup_netdev - initialization of net_device
2296 * @card: card structure
2298 * Returns 0 on success or <0 on failure
2300 * spider_net_setup_netdev initializes the net_device structure
2302 static int
2303 spider_net_setup_netdev(struct spider_net_card *card)
2305 int result;
2306 struct net_device *netdev = card->netdev;
2307 struct device_node *dn;
2308 struct sockaddr addr;
2309 const u8 *mac;
2311 SET_NETDEV_DEV(netdev, &card->pdev->dev);
2313 pci_set_drvdata(card->pdev, netdev);
2315 init_timer(&card->tx_timer);
2316 card->tx_timer.function =
2317 (void (*)(unsigned long)) spider_net_cleanup_tx_ring;
2318 card->tx_timer.data = (unsigned long) card;
2319 netdev->irq = card->pdev->irq;
2321 card->aneg_count = 0;
2322 init_timer(&card->aneg_timer);
2323 card->aneg_timer.function = spider_net_link_phy;
2324 card->aneg_timer.data = (unsigned long) card;
2326 card->options.rx_csum = SPIDER_NET_RX_CSUM_DEFAULT;
2328 netif_napi_add(netdev, &card->napi,
2329 spider_net_poll, SPIDER_NET_NAPI_WEIGHT);
2331 spider_net_setup_netdev_ops(netdev);
2333 netdev->features = NETIF_F_IP_CSUM | NETIF_F_LLTX;
2334 /* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
2335 * NETIF_F_HW_VLAN_FILTER */
2337 netdev->irq = card->pdev->irq;
2338 card->num_rx_ints = 0;
2339 card->ignore_rx_ramfull = 0;
2341 dn = pci_device_to_OF_node(card->pdev);
2342 if (!dn)
2343 return -EIO;
2345 mac = of_get_property(dn, "local-mac-address", NULL);
2346 if (!mac)
2347 return -EIO;
2348 memcpy(addr.sa_data, mac, ETH_ALEN);
2350 result = spider_net_set_mac(netdev, &addr);
2351 if ((result) && (netif_msg_probe(card)))
2352 dev_err(&card->netdev->dev,
2353 "Failed to set MAC address: %i\n", result);
2355 result = register_netdev(netdev);
2356 if (result) {
2357 if (netif_msg_probe(card))
2358 dev_err(&card->netdev->dev,
2359 "Couldn't register net_device: %i\n", result);
2360 return result;
2363 if (netif_msg_probe(card))
2364 pr_info("Initialized device %s.\n", netdev->name);
2366 return 0;
2370 * spider_net_alloc_card - allocates net_device and card structure
2372 * returns the card structure or NULL in case of errors
2374 * the card and net_device structures are linked to each other
2376 static struct spider_net_card *
2377 spider_net_alloc_card(void)
2379 struct net_device *netdev;
2380 struct spider_net_card *card;
2381 size_t alloc_size;
2383 alloc_size = sizeof(struct spider_net_card) +
2384 (tx_descriptors + rx_descriptors) * sizeof(struct spider_net_descr);
2385 netdev = alloc_etherdev(alloc_size);
2386 if (!netdev)
2387 return NULL;
2389 card = netdev_priv(netdev);
2390 card->netdev = netdev;
2391 card->msg_enable = SPIDER_NET_DEFAULT_MSG;
2392 INIT_WORK(&card->tx_timeout_task, spider_net_tx_timeout_task);
2393 init_waitqueue_head(&card->waitq);
2394 atomic_set(&card->tx_timeout_task_counter, 0);
2396 card->rx_chain.num_desc = rx_descriptors;
2397 card->rx_chain.ring = card->darray;
2398 card->tx_chain.num_desc = tx_descriptors;
2399 card->tx_chain.ring = card->darray + rx_descriptors;
2401 return card;
2405 * spider_net_undo_pci_setup - releases PCI ressources
2406 * @card: card structure
2408 * spider_net_undo_pci_setup releases the mapped regions
2410 static void
2411 spider_net_undo_pci_setup(struct spider_net_card *card)
2413 iounmap(card->regs);
2414 pci_release_regions(card->pdev);
2418 * spider_net_setup_pci_dev - sets up the device in terms of PCI operations
2419 * @pdev: PCI device
2421 * Returns the card structure or NULL if any errors occur
2423 * spider_net_setup_pci_dev initializes pdev and together with the
2424 * functions called in spider_net_open configures the device so that
2425 * data can be transferred over it
2426 * The net_device structure is attached to the card structure, if the
2427 * function returns without error.
2429 static struct spider_net_card *
2430 spider_net_setup_pci_dev(struct pci_dev *pdev)
2432 struct spider_net_card *card;
2433 unsigned long mmio_start, mmio_len;
2435 if (pci_enable_device(pdev)) {
2436 dev_err(&pdev->dev, "Couldn't enable PCI device\n");
2437 return NULL;
2440 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
2441 dev_err(&pdev->dev,
2442 "Couldn't find proper PCI device base address.\n");
2443 goto out_disable_dev;
2446 if (pci_request_regions(pdev, spider_net_driver_name)) {
2447 dev_err(&pdev->dev,
2448 "Couldn't obtain PCI resources, aborting.\n");
2449 goto out_disable_dev;
2452 pci_set_master(pdev);
2454 card = spider_net_alloc_card();
2455 if (!card) {
2456 dev_err(&pdev->dev,
2457 "Couldn't allocate net_device structure, aborting.\n");
2458 goto out_release_regions;
2460 card->pdev = pdev;
2462 /* fetch base address and length of first resource */
2463 mmio_start = pci_resource_start(pdev, 0);
2464 mmio_len = pci_resource_len(pdev, 0);
2466 card->netdev->mem_start = mmio_start;
2467 card->netdev->mem_end = mmio_start + mmio_len;
2468 card->regs = ioremap(mmio_start, mmio_len);
2470 if (!card->regs) {
2471 dev_err(&pdev->dev,
2472 "Couldn't obtain PCI resources, aborting.\n");
2473 goto out_release_regions;
2476 return card;
2478 out_release_regions:
2479 pci_release_regions(pdev);
2480 out_disable_dev:
2481 pci_disable_device(pdev);
2482 pci_set_drvdata(pdev, NULL);
2483 return NULL;
2487 * spider_net_probe - initialization of a device
2488 * @pdev: PCI device
2489 * @ent: entry in the device id list
2491 * Returns 0 on success, <0 on failure
2493 * spider_net_probe initializes pdev and registers a net_device
2494 * structure for it. After that, the device can be ifconfig'ed up
2496 static int __devinit
2497 spider_net_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
2499 int err = -EIO;
2500 struct spider_net_card *card;
2502 card = spider_net_setup_pci_dev(pdev);
2503 if (!card)
2504 goto out;
2506 spider_net_workaround_rxramfull(card);
2507 spider_net_init_card(card);
2509 err = spider_net_setup_phy(card);
2510 if (err)
2511 goto out_undo_pci;
2513 err = spider_net_setup_netdev(card);
2514 if (err)
2515 goto out_undo_pci;
2517 return 0;
2519 out_undo_pci:
2520 spider_net_undo_pci_setup(card);
2521 free_netdev(card->netdev);
2522 out:
2523 return err;
2527 * spider_net_remove - removal of a device
2528 * @pdev: PCI device
2530 * Returns 0 on success, <0 on failure
2532 * spider_net_remove is called to remove the device and unregisters the
2533 * net_device
2535 static void __devexit
2536 spider_net_remove(struct pci_dev *pdev)
2538 struct net_device *netdev;
2539 struct spider_net_card *card;
2541 netdev = pci_get_drvdata(pdev);
2542 card = netdev_priv(netdev);
2544 wait_event(card->waitq,
2545 atomic_read(&card->tx_timeout_task_counter) == 0);
2547 unregister_netdev(netdev);
2549 /* switch off card */
2550 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2551 SPIDER_NET_CKRCTRL_STOP_VALUE);
2552 spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2553 SPIDER_NET_CKRCTRL_RUN_VALUE);
2555 spider_net_undo_pci_setup(card);
2556 free_netdev(netdev);
2559 static struct pci_driver spider_net_driver = {
2560 .name = spider_net_driver_name,
2561 .id_table = spider_net_pci_tbl,
2562 .probe = spider_net_probe,
2563 .remove = __devexit_p(spider_net_remove)
2567 * spider_net_init - init function when the driver is loaded
2569 * spider_net_init registers the device driver
2571 static int __init spider_net_init(void)
2573 printk(KERN_INFO "Spidernet version %s.\n", VERSION);
2575 if (rx_descriptors < SPIDER_NET_RX_DESCRIPTORS_MIN) {
2576 rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MIN;
2577 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
2579 if (rx_descriptors > SPIDER_NET_RX_DESCRIPTORS_MAX) {
2580 rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MAX;
2581 pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
2583 if (tx_descriptors < SPIDER_NET_TX_DESCRIPTORS_MIN) {
2584 tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MIN;
2585 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
2587 if (tx_descriptors > SPIDER_NET_TX_DESCRIPTORS_MAX) {
2588 tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MAX;
2589 pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
2592 return pci_register_driver(&spider_net_driver);
2596 * spider_net_cleanup - exit function when driver is unloaded
2598 * spider_net_cleanup unregisters the device driver
2600 static void __exit spider_net_cleanup(void)
2602 pci_unregister_driver(&spider_net_driver);
2605 module_init(spider_net_init);
2606 module_exit(spider_net_cleanup);