drivers/regulator/lp3971.c

   1 /*
   2  * Regulator driver for National Semiconductors LP3971 PMIC chip
   3  *
   4  *  Copyright (C) 2009 Samsung Electronics
   5  *  Author: Marek Szyprowski <m.szyprowski@samsung.com>
   6  *
   7  * Based on wm8350.c
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  */
  14
  15 #include <linux/bug.h>
  16 #include <linux/err.h>
  17 #include <linux/i2c.h>
  18 #include <linux/kernel.h>
  19 #include <linux/regulator/driver.h>
  20 #include <linux/regulator/lp3971.h>
  21 #include <linux/slab.h>
  22
  23 struct lp3971 {
  24         struct device *dev;
  25         struct mutex io_lock;
  26         struct i2c_client *i2c;
  27         int num_regulators;
  28         struct regulator_dev **rdev;
  29 };
  30
  31 static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg);
  32 static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val);
  33
  34 #define LP3971_SYS_CONTROL1_REG 0x07
  35
  36 /* System control register 1 initial value,
  37    bits 4 and 5 are EPROM programmable */
  38 #define SYS_CONTROL1_INIT_VAL 0x40
  39 #define SYS_CONTROL1_INIT_MASK 0xCF
  40
  41 #define LP3971_BUCK_VOL_ENABLE_REG 0x10
  42 #define LP3971_BUCK_VOL_CHANGE_REG 0x20
  43
  44 /*      Voltage control registers shift:
  45         LP3971_BUCK1 -> 0
  46         LP3971_BUCK2 -> 4
  47         LP3971_BUCK3 -> 6
  48 */
  49 #define BUCK_VOL_CHANGE_SHIFT(x) (((!!x) << 2) | (x & ~0x01))
  50 #define BUCK_VOL_CHANGE_FLAG_GO 0x01
  51 #define BUCK_VOL_CHANGE_FLAG_TARGET 0x02
  52 #define BUCK_VOL_CHANGE_FLAG_MASK 0x03
  53
  54 #define LP3971_BUCK1_BASE 0x23
  55 #define LP3971_BUCK2_BASE 0x29
  56 #define LP3971_BUCK3_BASE 0x32
  57
  58 static const int buck_base_addr[] = {
  59         LP3971_BUCK1_BASE,
  60         LP3971_BUCK2_BASE,
  61         LP3971_BUCK3_BASE,
  62 };
  63
  64 #define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x])
  65 #define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1)
  66
  67 static const int buck_voltage_map[] = {
  68            0,  800,  850,  900,  950, 1000, 1050, 1100,
  69         1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
  70         1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
  71         3000, 3300,
  72 };
  73
  74 #define BUCK_TARGET_VOL_MASK 0x3f
  75 #define BUCK_TARGET_VOL_MIN_IDX 0x01
  76 #define BUCK_TARGET_VOL_MAX_IDX 0x19
  77
  78 #define LP3971_BUCK_RAMP_REG(x) (buck_base_addr[x]+2)
  79
  80 #define LP3971_LDO_ENABLE_REG 0x12
  81 #define LP3971_LDO_VOL_CONTR_BASE 0x39
  82
  83 /*      Voltage control registers:
  84         LP3971_LDO1 -> LP3971_LDO_VOL_CONTR_BASE + 0
  85         LP3971_LDO2 -> LP3971_LDO_VOL_CONTR_BASE + 0
  86         LP3971_LDO3 -> LP3971_LDO_VOL_CONTR_BASE + 1
  87         LP3971_LDO4 -> LP3971_LDO_VOL_CONTR_BASE + 1
  88         LP3971_LDO5 -> LP3971_LDO_VOL_CONTR_BASE + 2
  89 */
  90 #define LP3971_LDO_VOL_CONTR_REG(x)     (LP3971_LDO_VOL_CONTR_BASE + (x >> 1))
  91
  92 /*      Voltage control registers shift:
  93         LP3971_LDO1 -> 0, LP3971_LDO2 -> 4
  94         LP3971_LDO3 -> 0, LP3971_LDO4 -> 4
  95         LP3971_LDO5 -> 0
  96 */
  97 #define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2)
  98 #define LDO_VOL_CONTR_MASK 0x0f
  99
 100 static const int ldo45_voltage_map[] = {
 101         1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
 102         1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
 103 };
 104
 105 static const int ldo123_voltage_map[] = {
 106         1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
 107         2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
 108 };
 109
 110 static const int *ldo_voltage_map[] = {
 111         ldo123_voltage_map, /* LDO1 */
 112         ldo123_voltage_map, /* LDO2 */
 113         ldo123_voltage_map, /* LDO3 */
 114         ldo45_voltage_map, /* LDO4 */
 115         ldo45_voltage_map, /* LDO5 */
 116 };
 117
 118 #define LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[(x - LP3971_LDO1)])
 119
 120 #define LDO_VOL_MIN_IDX 0x00
 121 #define LDO_VOL_MAX_IDX 0x0f
 122
 123 static int lp3971_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
 124 {
 125         int ldo = rdev_get_id(dev) - LP3971_LDO1;
 126         return 1000 * LDO_VOL_VALUE_MAP(ldo)[index];
 127 }
 128
 129 static int lp3971_ldo_is_enabled(struct regulator_dev *dev)
 130 {
 131         struct lp3971 *lp3971 = rdev_get_drvdata(dev);
 132         int ldo = rdev_get_id(dev) - LP3971_LDO1;
 133         u16 mask = 1 << (1 + ldo);
 134         u16 val;
 135
 136         val = lp3971_reg_read(lp3971, LP3971_LDO_ENABLE_REG);
 137         return (val & mask) != 0;
 138 }
 139
 140 static int lp3971_ldo_enable(struct regulator_dev *dev)
 141 {
 142         struct lp3971 *lp3971 = rdev_get_drvdata(dev);
 143         int ldo = rdev_get_id(dev) - LP3971_LDO1;
 144         u16 mask = 1 << (1 + ldo);
 145
 146         return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, mask);
 147 }
 148
 149 static int lp3971_ldo_disable(struct regulator_dev *dev)
 150 {
 151         struct lp3971 *lp3971 = rdev_get_drvdata(dev);
 152         int ldo = rdev_get_id(dev) - LP3971_LDO1;
 153         u16 mask = 1 << (1 + ldo);
 154
 155         return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, 0);
 156 }
 157
 158 static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
 159 {
 160         struct lp3971 *lp3971 = rdev_get_drvdata(dev);
 161         int ldo = rdev_get_id(dev) - LP3971_LDO1;
 162         u16 val, reg;
 163
 164         reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo));
 165         val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK;
 166
 167         return 1000 * LDO_VOL_VALUE_MAP(ldo)[val];
 168 }
 169
 170 static int lp3971_ldo_set_voltage(struct regulator_dev *dev,
 171                                   int min_uV, int max_uV)
 172 {
 173         struct lp3971 *lp3971 = rdev_get_drvdata(dev);
 174         int ldo = rdev_get_id(dev) - LP3971_LDO1;
 175         int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
 176         const int *vol_map = LDO_VOL_VALUE_MAP(ldo);
 177         u16 val;
 178
 179         if (min_vol < vol_map[LDO_VOL_MIN_IDX] ||
 180             min_vol > vol_map[LDO_VOL_MAX_IDX])
 181                 return -EINVAL;
 182
 183         for (val = LDO_VOL_MIN_IDX; val <= LDO_VOL_MAX_IDX; val++)
 184                 if (vol_map[val] >= min_vol)
 185                         break;
 186
 187         if (val > LDO_VOL_MAX_IDX || vol_map[val] > max_vol)
 188                 return -EINVAL;
 189
 190         return lp3971_set_bits(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo),
 191                         LDO_VOL_CONTR_MASK << LDO_VOL_CONTR_SHIFT(ldo),
 192                         val << LDO_VOL_CONTR_SHIFT(ldo));
 193 }
 194
 195 static struct regulator_ops lp3971_ldo_ops = {
 196         .list_voltage = lp3971_ldo_list_voltage,
 197         .is_enabled = lp3971_ldo_is_enabled,
 198         .enable = lp3971_ldo_enable,
 199         .disable = lp3971_ldo_disable,
 200         .get_voltage = lp3971_ldo_get_voltage,
 201         .set_voltage = lp3971_ldo_set_voltage,
 202 };
 203
 204 static int lp3971_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
 205 {
 206         return 1000 * buck_voltage_map[index];
 207 }
 208
 209 static int lp3971_dcdc_is_enabled(struct regulator_dev *dev)
 210 {
 211         struct lp3971 *lp3971 = rdev_get_drvdata(dev);
 212         int buck = rdev_get_id(dev) - LP3971_DCDC1;
 213         u16 mask = 1 << (buck * 2);
 214         u16 val;
 215
 216         val = lp3971_reg_read(lp3971, LP3971_BUCK_VOL_ENABLE_REG);
 217         return (val & mask) != 0;
 218 }
 219
 220 static int lp3971_dcdc_enable(struct regulator_dev *dev)
 221 {
 222         struct lp3971 *lp3971 = rdev_get_drvdata(dev);
 223         int buck = rdev_get_id(dev) - LP3971_DCDC1;
 224         u16 mask = 1 << (buck * 2);
 225
 226         return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, mask);
 227 }
 228
 229 static int lp3971_dcdc_disable(struct regulator_dev *dev)
 230 {
 231         struct lp3971 *lp3971 = rdev_get_drvdata(dev);
 232         int buck = rdev_get_id(dev) - LP3971_DCDC1;
 233         u16 mask = 1 << (buck * 2);
 234
 235         return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, 0);
 236 }
 237
 238 static int lp3971_dcdc_get_voltage(struct regulator_dev *dev)
 239 {
 240         struct lp3971 *lp3971 = rdev_get_drvdata(dev);
 241         int buck = rdev_get_id(dev) - LP3971_DCDC1;
 242         u16 reg;
 243         int val;
 244
 245         reg = lp3971_reg_read(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck));
 246         reg &= BUCK_TARGET_VOL_MASK;
 247
 248         if (reg <= BUCK_TARGET_VOL_MAX_IDX)
 249                 val = 1000 * buck_voltage_map[reg];
 250         else {
 251                 val = 0;
 252                 dev_warn(&dev->dev, "chip reported incorrect voltage value.\n");
 253         }
 254
 255         return val;
 256 }
 257
 258 static int lp3971_dcdc_set_voltage(struct regulator_dev *dev,
 259                                   int min_uV, int max_uV)
 260 {
 261         struct lp3971 *lp3971 = rdev_get_drvdata(dev);
 262         int buck = rdev_get_id(dev) - LP3971_DCDC1;
 263         int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
 264         const int *vol_map = buck_voltage_map;
 265         u16 val;
 266         int ret;
 267
 268         if (min_vol < vol_map[BUCK_TARGET_VOL_MIN_IDX] ||
 269             min_vol > vol_map[BUCK_TARGET_VOL_MAX_IDX])
 270                 return -EINVAL;
 271
 272         for (val = BUCK_TARGET_VOL_MIN_IDX; val <= BUCK_TARGET_VOL_MAX_IDX;
 273              val++)
 274                 if (vol_map[val] >= min_vol)
 275                         break;
 276
 277         if (val > BUCK_TARGET_VOL_MAX_IDX || vol_map[val] > max_vol)
 278                 return -EINVAL;
 279
 280         ret = lp3971_set_bits(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck),
 281                BUCK_TARGET_VOL_MASK, val);
 282         if (ret)
 283                 return ret;
 284
 285         ret = lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG,
 286                BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck),
 287                BUCK_VOL_CHANGE_FLAG_GO << BUCK_VOL_CHANGE_SHIFT(buck));
 288         if (ret)
 289                 return ret;
 290
 291         return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG,
 292                BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck),
 293                0 << BUCK_VOL_CHANGE_SHIFT(buck));
 294 }
 295
 296 static struct regulator_ops lp3971_dcdc_ops = {
 297         .list_voltage = lp3971_dcdc_list_voltage,
 298         .is_enabled = lp3971_dcdc_is_enabled,
 299         .enable = lp3971_dcdc_enable,
 300         .disable = lp3971_dcdc_disable,
 301         .get_voltage = lp3971_dcdc_get_voltage,
 302         .set_voltage = lp3971_dcdc_set_voltage,
 303 };
 304
 305 static struct regulator_desc regulators[] = {
 306         {
 307                 .name = "LDO1",
 308                 .id = LP3971_LDO1,
 309                 .ops = &lp3971_ldo_ops,
 310                 .n_voltages = ARRAY_SIZE(ldo123_voltage_map),
 311                 .type = REGULATOR_VOLTAGE,
 312                 .owner = THIS_MODULE,
 313         },
 314         {
 315                 .name = "LDO2",
 316                 .id = LP3971_LDO2,
 317                 .ops = &lp3971_ldo_ops,
 318                 .n_voltages = ARRAY_SIZE(ldo123_voltage_map),
 319                 .type = REGULATOR_VOLTAGE,
 320                 .owner = THIS_MODULE,
 321         },
 322         {
 323                 .name = "LDO3",
 324                 .id = LP3971_LDO3,
 325                 .ops = &lp3971_ldo_ops,
 326                 .n_voltages = ARRAY_SIZE(ldo123_voltage_map),
 327                 .type = REGULATOR_VOLTAGE,
 328                 .owner = THIS_MODULE,
 329         },
 330         {
 331                 .name = "LDO4",
 332                 .id = LP3971_LDO4,
 333                 .ops = &lp3971_ldo_ops,
 334                 .n_voltages = ARRAY_SIZE(ldo45_voltage_map),
 335                 .type = REGULATOR_VOLTAGE,
 336                 .owner = THIS_MODULE,
 337         },
 338         {
 339                 .name = "LDO5",
 340                 .id = LP3971_LDO5,
 341                 .ops = &lp3971_ldo_ops,
 342                 .n_voltages = ARRAY_SIZE(ldo45_voltage_map),
 343                 .type = REGULATOR_VOLTAGE,
 344                 .owner = THIS_MODULE,
 345         },
 346         {
 347                 .name = "DCDC1",
 348                 .id = LP3971_DCDC1,
 349                 .ops = &lp3971_dcdc_ops,
 350                 .n_voltages = ARRAY_SIZE(buck_voltage_map),
 351                 .type = REGULATOR_VOLTAGE,
 352                 .owner = THIS_MODULE,
 353         },
 354         {
 355                 .name = "DCDC2",
 356                 .id = LP3971_DCDC2,
 357                 .ops = &lp3971_dcdc_ops,
 358                 .n_voltages = ARRAY_SIZE(buck_voltage_map),
 359                 .type = REGULATOR_VOLTAGE,
 360                 .owner = THIS_MODULE,
 361         },
 362         {
 363                 .name = "DCDC3",
 364                 .id = LP3971_DCDC3,
 365                 .ops = &lp3971_dcdc_ops,
 366                 .n_voltages = ARRAY_SIZE(buck_voltage_map),
 367                 .type = REGULATOR_VOLTAGE,
 368                 .owner = THIS_MODULE,
 369         },
 370 };
 371
 372 static int lp3971_i2c_read(struct i2c_client *i2c, char reg, int count,
 373         u16 *dest)
 374 {
 375         int ret;
 376
 377         if (count != 1)
 378                 return -EIO;
 379         ret = i2c_smbus_read_byte_data(i2c, reg);
 380         if (ret < 0 || count != 1)
 381                 return -EIO;
 382
 383         *dest = ret;
 384         return 0;
 385 }
 386
 387 static int lp3971_i2c_write(struct i2c_client *i2c, char reg, int count,
 388         const u16 *src)
 389 {
 390         int ret;
 391
 392         if (count != 1)
 393                 return -EIO;
 394         ret = i2c_smbus_write_byte_data(i2c, reg, *src);
 395         if (ret >= 0)
 396                 return 0;
 397
 398         return ret;
 399 }
 400
 401 static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg)
 402 {
 403         u16 val = 0;
 404
 405         mutex_lock(&lp3971->io_lock);
 406
 407         lp3971_i2c_read(lp3971->i2c, reg, 1, &val);
 408
 409         dev_dbg(lp3971->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg,
 410                 (unsigned)val&0xff);
 411
 412         mutex_unlock(&lp3971->io_lock);
 413
 414         return val & 0xff;
 415 }
 416
 417 static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val)
 418 {
 419         u16 tmp;
 420         int ret;
 421
 422         mutex_lock(&lp3971->io_lock);
 423
 424         ret = lp3971_i2c_read(lp3971->i2c, reg, 1, &tmp);
 425         tmp = (tmp & ~mask) | val;
 426         if (ret == 0) {
 427                 ret = lp3971_i2c_write(lp3971->i2c, reg, 1, &tmp);
 428                 dev_dbg(lp3971->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg,
 429                         (unsigned)val&0xff);
 430         }
 431         mutex_unlock(&lp3971->io_lock);
 432
 433         return ret;
 434 }
 435
 436 static int __devinit setup_regulators(struct lp3971 *lp3971,
 437                                       struct lp3971_platform_data *pdata)
 438 {
 439         int i, err;
 440
 441         lp3971->num_regulators = pdata->num_regulators;
 442         lp3971->rdev = kcalloc(pdata->num_regulators,
 443                                 sizeof(struct regulator_dev *), GFP_KERNEL);
 444         if (!lp3971->rdev) {
 445                 err = -ENOMEM;
 446                 goto err_nomem;
 447         }
 448
 449         /* Instantiate the regulators */
 450         for (i = 0; i < pdata->num_regulators; i++) {
 451                 struct lp3971_regulator_subdev *reg = &pdata->regulators[i];
 452                 lp3971->rdev[i] = regulator_register(&regulators[reg->id],
 453                                         lp3971->dev, reg->initdata, lp3971);
 454
 455                 if (IS_ERR(lp3971->rdev[i])) {
 456                         err = PTR_ERR(lp3971->rdev[i]);
 457                         dev_err(lp3971->dev, "regulator init failed: %d\n",
 458                                 err);
 459                         goto error;
 460                 }
 461         }
 462
 463         return 0;
 464
 465 error:
 466         while (--i >= 0)
 467                 regulator_unregister(lp3971->rdev[i]);
 468         kfree(lp3971->rdev);
 469         lp3971->rdev = NULL;
 470 err_nomem:
 471         return err;
 472 }
 473
 474 static int __devinit lp3971_i2c_probe(struct i2c_client *i2c,
 475                             const struct i2c_device_id *id)
 476 {
 477         struct lp3971 *lp3971;
 478         struct lp3971_platform_data *pdata = i2c->dev.platform_data;
 479         int ret;
 480         u16 val;
 481
 482         if (!pdata) {
 483                 dev_dbg(&i2c->dev, "No platform init data supplied\n");
 484                 return -ENODEV;
 485         }
 486
 487         lp3971 = kzalloc(sizeof(struct lp3971), GFP_KERNEL);
 488         if (lp3971 == NULL)
 489                 return -ENOMEM;
 490
 491         lp3971->i2c = i2c;
 492         lp3971->dev = &i2c->dev;
 493
 494         mutex_init(&lp3971->io_lock);
 495
 496         /* Detect LP3971 */
 497         ret = lp3971_i2c_read(i2c, LP3971_SYS_CONTROL1_REG, 1, &val);
 498         if (ret == 0 && (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL)
 499                 ret = -ENODEV;
 500         if (ret < 0) {
 501                 dev_err(&i2c->dev, "failed to detect device\n");
 502                 goto err_detect;
 503         }
 504
 505         ret = setup_regulators(lp3971, pdata);
 506         if (ret < 0)
 507                 goto err_detect;
 508
 509         i2c_set_clientdata(i2c, lp3971);
 510         return 0;
 511
 512 err_detect:
 513         kfree(lp3971);
 514         return ret;
 515 }
 516
 517 static int __devexit lp3971_i2c_remove(struct i2c_client *i2c)
 518 {
 519         struct lp3971 *lp3971 = i2c_get_clientdata(i2c);
 520         int i;
 521
 522         for (i = 0; i < lp3971->num_regulators; i++)
 523                 regulator_unregister(lp3971->rdev[i]);
 524
 525         kfree(lp3971->rdev);
 526         kfree(lp3971);
 527
 528         return 0;
 529 }
 530
 531 static const struct i2c_device_id lp3971_i2c_id[] = {
 532        { "lp3971", 0 },
 533        { }
 534 };
 535 MODULE_DEVICE_TABLE(i2c, lp3971_i2c_id);
 536
 537 static struct i2c_driver lp3971_i2c_driver = {
 538         .driver = {
 539                 .name = "LP3971",
 540                 .owner = THIS_MODULE,
 541         },
 542         .probe    = lp3971_i2c_probe,
 543         .remove   = __devexit_p(lp3971_i2c_remove),
 544         .id_table = lp3971_i2c_id,
 545 };
 546
 547 static int __init lp3971_module_init(void)
 548 {
 549         int ret;
 550
 551         ret = i2c_add_driver(&lp3971_i2c_driver);
 552         if (ret != 0)
 553                 pr_err("Failed to register I2C driver: %d\n", ret);
 554
 555         return ret;
 556 }
 557 module_init(lp3971_module_init);
 558
 559 static void __exit lp3971_module_exit(void)
 560 {
 561         i2c_del_driver(&lp3971_i2c_driver);
 562 }
 563 module_exit(lp3971_module_exit);
 564
 565 MODULE_LICENSE("GPL");
 566 MODULE_AUTHOR("Marek Szyprowski <m.szyprowski@samsung.com>");
 567 MODULE_DESCRIPTION("LP3971 PMIC driver");