?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[ARM] properly report mv78100 stepping A1
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / mach-ep93xx / core.c
blobb4357c388d2e5e87b37e344fbdaa965083fac4e6
1 /*
2 * arch/arm/mach-ep93xx/core.c
3 * Core routines for Cirrus EP93xx chips.
4 *
5 * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
6 * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
7 *
8 * Thanks go to Michael Burian and Ray Lehtiniemi for their key
9 * role in the ep93xx linux community.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or (at
14 * your option) any later version.
15 */
16
17 #include <linux/kernel.h>
18 #include <linux/init.h>
19 #include <linux/platform_device.h>
20 #include <linux/interrupt.h>
21 #include <linux/dma-mapping.h>
22 #include <linux/timex.h>
23 #include <linux/io.h>
24 #include <linux/gpio.h>
25 #include <linux/leds.h>
26 #include <linux/termios.h>
27 #include <linux/amba/bus.h>
28 #include <linux/amba/serial.h>
29 #include <linux/i2c.h>
30 #include <linux/i2c-gpio.h>
31
32 #include <mach/hardware.h>
33 #include <mach/fb.h>
34
35 #include <asm/mach/map.h>
36 #include <asm/mach/time.h>
37 #include <asm/mach/irq.h>
38
39 #include <asm/hardware/vic.h>
40
41
42 /*************************************************************************
43 * Static I/O mappings that are needed for all EP93xx platforms
44 *************************************************************************/
45 static struct map_desc ep93xx_io_desc[] __initdata = {
46 {
47 .virtual = EP93XX_AHB_VIRT_BASE,
48 .pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
49 .length = EP93XX_AHB_SIZE,
50 .type = MT_DEVICE,
51 }, {
52 .virtual = EP93XX_APB_VIRT_BASE,
53 .pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE),
54 .length = EP93XX_APB_SIZE,
55 .type = MT_DEVICE,
56 },
57 };
58
59 void __init ep93xx_map_io(void)
60 {
61 iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
62 }
63
64
65 /*************************************************************************
66 * Timer handling for EP93xx
67 *************************************************************************
68 * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and
69 * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
70 * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz,
71 * is free-running, and can't generate interrupts.
72 *
73 * The 508 kHz timers are ideal for use for the timer interrupt, as the
74 * most common values of HZ divide 508 kHz nicely. We pick one of the 16
75 * bit timers (timer 1) since we don't need more than 16 bits of reload
76 * value as long as HZ >= 8.
77 *
78 * The higher clock rate of timer 4 makes it a better choice than the
79 * other timers for use in gettimeoffset(), while the fact that it can't
80 * generate interrupts means we don't have to worry about not being able
81 * to use this timer for something else. We also use timer 4 for keeping
82 * track of lost jiffies.
83 */
84 static unsigned int last_jiffy_time;
85
86 #define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
87
88 static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
89 {
90 __raw_writel(1, EP93XX_TIMER1_CLEAR);
91 while ((signed long)
92 (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
93 >= TIMER4_TICKS_PER_JIFFY) {
94 last_jiffy_time += TIMER4_TICKS_PER_JIFFY;
95 timer_tick();
96 }
97
98 return IRQ_HANDLED;
99 }
100
101 static struct irqaction ep93xx_timer_irq = {
102 .name = "ep93xx timer",
103 .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
104 .handler = ep93xx_timer_interrupt,
105 };
106
107 static void __init ep93xx_timer_init(void)
108 {
109 /* Enable periodic HZ timer. */
110 __raw_writel(0x48, EP93XX_TIMER1_CONTROL);
111 __raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD);
112 __raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
113
114 /* Enable lost jiffy timer. */
115 __raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
116
117 setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
118 }
119
120 static unsigned long ep93xx_gettimeoffset(void)
121 {
122 int offset;
123
124 offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
125
126 /* Calculate (1000000 / 983040) * offset. */
127 return offset + (53 * offset / 3072);
128 }
129
130 struct sys_timer ep93xx_timer = {
131 .init = ep93xx_timer_init,
132 .offset = ep93xx_gettimeoffset,
133 };
134
135
136 /*************************************************************************
137 * GPIO handling for EP93xx
138 *************************************************************************/
139 static unsigned char gpio_int_unmasked[3];
140 static unsigned char gpio_int_enabled[3];
141 static unsigned char gpio_int_type1[3];
142 static unsigned char gpio_int_type2[3];
143 static unsigned char gpio_int_debounce[3];
144
145 /* Port ordering is: A B F */
146 static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
147 static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
148 static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
149 static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
150 static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
151
152 void ep93xx_gpio_update_int_params(unsigned port)
153 {
154 BUG_ON(port > 2);
155
156 __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
157
158 __raw_writeb(gpio_int_type2[port],
159 EP93XX_GPIO_REG(int_type2_register_offset[port]));
160
161 __raw_writeb(gpio_int_type1[port],
162 EP93XX_GPIO_REG(int_type1_register_offset[port]));
163
164 __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
165 EP93XX_GPIO_REG(int_en_register_offset[port]));
166 }
167
168 void ep93xx_gpio_int_mask(unsigned line)
169 {
170 gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
171 }
172
173 void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
174 {
175 int line = irq_to_gpio(irq);
176 int port = line >> 3;
177 int port_mask = 1 << (line & 7);
178
179 if (enable)
180 gpio_int_debounce[port] |= port_mask;
181 else
182 gpio_int_debounce[port] &= ~port_mask;
183
184 __raw_writeb(gpio_int_debounce[port],
185 EP93XX_GPIO_REG(int_debounce_register_offset[port]));
186 }
187 EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
188
189 /*************************************************************************
190 * EP93xx IRQ handling
191 *************************************************************************/
192 static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
193 {
194 unsigned char status;
195 int i;
196
197 status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
198 for (i = 0; i < 8; i++) {
199 if (status & (1 << i)) {
200 int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
201 generic_handle_irq(gpio_irq);
202 }
203 }
204
205 status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
206 for (i = 0; i < 8; i++) {
207 if (status & (1 << i)) {
208 int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
209 generic_handle_irq(gpio_irq);
210 }
211 }
212 }
213
214 static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
215 {
216 /*
217 * map discontiguous hw irq range to continous sw irq range:
218 *
219 * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
220 */
221 int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
222 int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
223
224 generic_handle_irq(gpio_irq);
225 }
226
227 static void ep93xx_gpio_irq_ack(unsigned int irq)
228 {
229 int line = irq_to_gpio(irq);
230 int port = line >> 3;
231 int port_mask = 1 << (line & 7);
232
233 if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
234 gpio_int_type2[port] ^= port_mask; /* switch edge direction */
235 ep93xx_gpio_update_int_params(port);
236 }
237
238 __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
239 }
240
241 static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
242 {
243 int line = irq_to_gpio(irq);
244 int port = line >> 3;
245 int port_mask = 1 << (line & 7);
246
247 if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
248 gpio_int_type2[port] ^= port_mask; /* switch edge direction */
249
250 gpio_int_unmasked[port] &= ~port_mask;
251 ep93xx_gpio_update_int_params(port);
252
253 __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
254 }
255
256 static void ep93xx_gpio_irq_mask(unsigned int irq)
257 {
258 int line = irq_to_gpio(irq);
259 int port = line >> 3;
260
261 gpio_int_unmasked[port] &= ~(1 << (line & 7));
262 ep93xx_gpio_update_int_params(port);
263 }
264
265 static void ep93xx_gpio_irq_unmask(unsigned int irq)
266 {
267 int line = irq_to_gpio(irq);
268 int port = line >> 3;
269
270 gpio_int_unmasked[port] |= 1 << (line & 7);
271 ep93xx_gpio_update_int_params(port);
272 }
273
274
275 /*
276 * gpio_int_type1 controls whether the interrupt is level (0) or
277 * edge (1) triggered, while gpio_int_type2 controls whether it
278 * triggers on low/falling (0) or high/rising (1).
279 */
280 static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
281 {
282 struct irq_desc *desc = irq_desc + irq;
283 const int gpio = irq_to_gpio(irq);
284 const int port = gpio >> 3;
285 const int port_mask = 1 << (gpio & 7);
286
287 gpio_direction_input(gpio);
288
289 switch (type) {
290 case IRQ_TYPE_EDGE_RISING:
291 gpio_int_type1[port] |= port_mask;
292 gpio_int_type2[port] |= port_mask;
293 desc->handle_irq = handle_edge_irq;
294 break;
295 case IRQ_TYPE_EDGE_FALLING:
296 gpio_int_type1[port] |= port_mask;
297 gpio_int_type2[port] &= ~port_mask;
298 desc->handle_irq = handle_edge_irq;
299 break;
300 case IRQ_TYPE_LEVEL_HIGH:
301 gpio_int_type1[port] &= ~port_mask;
302 gpio_int_type2[port] |= port_mask;
303 desc->handle_irq = handle_level_irq;
304 break;
305 case IRQ_TYPE_LEVEL_LOW:
306 gpio_int_type1[port] &= ~port_mask;
307 gpio_int_type2[port] &= ~port_mask;
308 desc->handle_irq = handle_level_irq;
309 break;
310 case IRQ_TYPE_EDGE_BOTH:
311 gpio_int_type1[port] |= port_mask;
312 /* set initial polarity based on current input level */
313 if (gpio_get_value(gpio))
314 gpio_int_type2[port] &= ~port_mask; /* falling */
315 else
316 gpio_int_type2[port] |= port_mask; /* rising */
317 desc->handle_irq = handle_edge_irq;
318 break;
319 default:
320 pr_err("ep93xx: failed to set irq type %d for gpio %d\n",
321 type, gpio);
322 return -EINVAL;
323 }
324
325 gpio_int_enabled[port] |= port_mask;
326
327 desc->status &= ~IRQ_TYPE_SENSE_MASK;
328 desc->status |= type & IRQ_TYPE_SENSE_MASK;
329
330 ep93xx_gpio_update_int_params(port);
331
332 return 0;
333 }
334
335 static struct irq_chip ep93xx_gpio_irq_chip = {
336 .name = "GPIO",
337 .ack = ep93xx_gpio_irq_ack,
338 .mask_ack = ep93xx_gpio_irq_mask_ack,
339 .mask = ep93xx_gpio_irq_mask,
340 .unmask = ep93xx_gpio_irq_unmask,
341 .set_type = ep93xx_gpio_irq_type,
342 };
343
344
345 void __init ep93xx_init_irq(void)
346 {
347 int gpio_irq;
348
349 vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
350 vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
351
352 for (gpio_irq = gpio_to_irq(0);
353 gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
354 set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
355 set_irq_handler(gpio_irq, handle_level_irq);
356 set_irq_flags(gpio_irq, IRQF_VALID);
357 }
358
359 set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
360 set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
361 set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
362 set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
363 set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
364 set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
365 set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
366 set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
367 set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
368 }
369
370
371 /*************************************************************************
372 * EP93xx System Controller Software Locked register handling
373 *************************************************************************/
374
375 /*
376 * syscon_swlock prevents anything else from writing to the syscon
377 * block while a software locked register is being written.
378 */
379 static DEFINE_SPINLOCK(syscon_swlock);
380
381 void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
382 {
383 unsigned long flags;
384
385 spin_lock_irqsave(&syscon_swlock, flags);
386
387 __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
388 __raw_writel(val, reg);
389
390 spin_unlock_irqrestore(&syscon_swlock, flags);
391 }
392 EXPORT_SYMBOL(ep93xx_syscon_swlocked_write);
393
394 void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
395 {
396 unsigned long flags;
397 unsigned int val;
398
399 spin_lock_irqsave(&syscon_swlock, flags);
400
401 val = __raw_readl(EP93XX_SYSCON_DEVCFG);
402 val |= set_bits;
403 val &= ~clear_bits;
404 __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
405 __raw_writel(val, EP93XX_SYSCON_DEVCFG);
406
407 spin_unlock_irqrestore(&syscon_swlock, flags);
408 }
409 EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
410
411
412 /*************************************************************************
413 * EP93xx peripheral handling
414 *************************************************************************/
415 #define EP93XX_UART_MCR_OFFSET (0x0100)
416
417 static void ep93xx_uart_set_mctrl(struct amba_device *dev,
418 void __iomem *base, unsigned int mctrl)
419 {
420 unsigned int mcr;
421
422 mcr = 0;
423 if (!(mctrl & TIOCM_RTS))
424 mcr |= 2;
425 if (!(mctrl & TIOCM_DTR))
426 mcr |= 1;
427
428 __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
429 }
430
431 static struct amba_pl010_data ep93xx_uart_data = {
432 .set_mctrl = ep93xx_uart_set_mctrl,
433 };
434
435 static struct amba_device uart1_device = {
436 .dev = {
437 .init_name = "apb:uart1",
438 .platform_data = &ep93xx_uart_data,
439 },
440 .res = {
441 .start = EP93XX_UART1_PHYS_BASE,
442 .end = EP93XX_UART1_PHYS_BASE + 0x0fff,
443 .flags = IORESOURCE_MEM,
444 },
445 .irq = { IRQ_EP93XX_UART1, NO_IRQ },
446 .periphid = 0x00041010,
447 };
448
449 static struct amba_device uart2_device = {
450 .dev = {
451 .init_name = "apb:uart2",
452 .platform_data = &ep93xx_uart_data,
453 },
454 .res = {
455 .start = EP93XX_UART2_PHYS_BASE,
456 .end = EP93XX_UART2_PHYS_BASE + 0x0fff,
457 .flags = IORESOURCE_MEM,
458 },
459 .irq = { IRQ_EP93XX_UART2, NO_IRQ },
460 .periphid = 0x00041010,
461 };
462
463 static struct amba_device uart3_device = {
464 .dev = {
465 .init_name = "apb:uart3",
466 .platform_data = &ep93xx_uart_data,
467 },
468 .res = {
469 .start = EP93XX_UART3_PHYS_BASE,
470 .end = EP93XX_UART3_PHYS_BASE + 0x0fff,
471 .flags = IORESOURCE_MEM,
472 },
473 .irq = { IRQ_EP93XX_UART3, NO_IRQ },
474 .periphid = 0x00041010,
475 };
476
477
478 static struct resource ep93xx_rtc_resource[] = {
479 {
480 .start = EP93XX_RTC_PHYS_BASE,
481 .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1,
482 .flags = IORESOURCE_MEM,
483 },
484 };
485
486 static struct platform_device ep93xx_rtc_device = {
487 .name = "ep93xx-rtc",
488 .id = -1,
489 .num_resources = ARRAY_SIZE(ep93xx_rtc_resource),
490 .resource = ep93xx_rtc_resource,
491 };
492
493
494 static struct resource ep93xx_ohci_resources[] = {
495 [0] = {
496 .start = EP93XX_USB_PHYS_BASE,
497 .end = EP93XX_USB_PHYS_BASE + 0x0fff,
498 .flags = IORESOURCE_MEM,
499 },
500 [1] = {
501 .start = IRQ_EP93XX_USB,
502 .end = IRQ_EP93XX_USB,
503 .flags = IORESOURCE_IRQ,
504 },
505 };
506
507
508 static struct platform_device ep93xx_ohci_device = {
509 .name = "ep93xx-ohci",
510 .id = -1,
511 .dev = {
512 .dma_mask = &ep93xx_ohci_device.dev.coherent_dma_mask,
513 .coherent_dma_mask = DMA_BIT_MASK(32),
514 },
515 .num_resources = ARRAY_SIZE(ep93xx_ohci_resources),
516 .resource = ep93xx_ohci_resources,
517 };
518
519 static struct ep93xx_eth_data ep93xx_eth_data;
520
521 static struct resource ep93xx_eth_resource[] = {
522 {
523 .start = EP93XX_ETHERNET_PHYS_BASE,
524 .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
525 .flags = IORESOURCE_MEM,
526 }, {
527 .start = IRQ_EP93XX_ETHERNET,
528 .end = IRQ_EP93XX_ETHERNET,
529 .flags = IORESOURCE_IRQ,
530 }
531 };
532
533 static struct platform_device ep93xx_eth_device = {
534 .name = "ep93xx-eth",
535 .id = -1,
536 .dev = {
537 .platform_data = &ep93xx_eth_data,
538 },
539 .num_resources = ARRAY_SIZE(ep93xx_eth_resource),
540 .resource = ep93xx_eth_resource,
541 };
542
543 void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
544 {
545 if (copy_addr)
546 memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
547
548 ep93xx_eth_data = *data;
549 platform_device_register(&ep93xx_eth_device);
550 }
551
552
553 /*************************************************************************
554 * EP93xx i2c peripheral handling
555 *************************************************************************/
556 static struct i2c_gpio_platform_data ep93xx_i2c_data;
557
558 static struct platform_device ep93xx_i2c_device = {
559 .name = "i2c-gpio",
560 .id = 0,
561 .dev.platform_data = &ep93xx_i2c_data,
562 };
563
564 void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
565 struct i2c_board_info *devices, int num)
566 {
567 /*
568 * Set the EEPROM interface pin drive type control.
569 * Defines the driver type for the EECLK and EEDAT pins as either
570 * open drain, which will require an external pull-up, or a normal
571 * CMOS driver.
572 */
573 if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
574 pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
575 if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
576 pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
577
578 __raw_writel((data->sda_is_open_drain << 1) |
579 (data->scl_is_open_drain << 0),
580 EP93XX_GPIO_EEDRIVE);
581
582 ep93xx_i2c_data = *data;
583 i2c_register_board_info(0, devices, num);
584 platform_device_register(&ep93xx_i2c_device);
585 }
586
587
588 /*************************************************************************
589 * EP93xx LEDs
590 *************************************************************************/
591 static struct gpio_led ep93xx_led_pins[] = {
592 {
593 .name = "platform:grled",
594 .gpio = EP93XX_GPIO_LINE_GRLED,
595 }, {
596 .name = "platform:rdled",
597 .gpio = EP93XX_GPIO_LINE_RDLED,
598 },
599 };
600
601 static struct gpio_led_platform_data ep93xx_led_data = {
602 .num_leds = ARRAY_SIZE(ep93xx_led_pins),
603 .leds = ep93xx_led_pins,
604 };
605
606 static struct platform_device ep93xx_leds = {
607 .name = "leds-gpio",
608 .id = -1,
609 .dev = {
610 .platform_data = &ep93xx_led_data,
611 },
612 };
613
614
615 /*************************************************************************
616 * EP93xx pwm peripheral handling
617 *************************************************************************/
618 static struct resource ep93xx_pwm0_resource[] = {
619 {
620 .start = EP93XX_PWM_PHYS_BASE,
621 .end = EP93XX_PWM_PHYS_BASE + 0x10 - 1,
622 .flags = IORESOURCE_MEM,
623 },
624 };
625
626 static struct platform_device ep93xx_pwm0_device = {
627 .name = "ep93xx-pwm",
628 .id = 0,
629 .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource),
630 .resource = ep93xx_pwm0_resource,
631 };
632
633 static struct resource ep93xx_pwm1_resource[] = {
634 {
635 .start = EP93XX_PWM_PHYS_BASE + 0x20,
636 .end = EP93XX_PWM_PHYS_BASE + 0x30 - 1,
637 .flags = IORESOURCE_MEM,
638 },
639 };
640
641 static struct platform_device ep93xx_pwm1_device = {
642 .name = "ep93xx-pwm",
643 .id = 1,
644 .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource),
645 .resource = ep93xx_pwm1_resource,
646 };
647
648 void __init ep93xx_register_pwm(int pwm0, int pwm1)
649 {
650 if (pwm0)
651 platform_device_register(&ep93xx_pwm0_device);
652
653 /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
654 if (pwm1)
655 platform_device_register(&ep93xx_pwm1_device);
656 }
657
658 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
659 {
660 int err;
661
662 if (pdev->id == 0) {
663 err = 0;
664 } else if (pdev->id == 1) {
665 err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
666 dev_name(&pdev->dev));
667 if (err)
668 return err;
669 err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
670 if (err)
671 goto fail;
672
673 /* PWM 1 output on EGPIO[14] */
674 ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
675 } else {
676 err = -ENODEV;
677 }
678
679 return err;
680
681 fail:
682 gpio_free(EP93XX_GPIO_LINE_EGPIO14);
683 return err;
684 }
685 EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
686
687 void ep93xx_pwm_release_gpio(struct platform_device *pdev)
688 {
689 if (pdev->id == 1) {
690 gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
691 gpio_free(EP93XX_GPIO_LINE_EGPIO14);
692
693 /* EGPIO[14] used for GPIO */
694 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
695 }
696 }
697 EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
698
699
700 /*************************************************************************
701 * EP93xx video peripheral handling
702 *************************************************************************/
703 static struct ep93xxfb_mach_info ep93xxfb_data;
704
705 static struct resource ep93xx_fb_resource[] = {
706 {
707 .start = EP93XX_RASTER_PHYS_BASE,
708 .end = EP93XX_RASTER_PHYS_BASE + 0x800 - 1,
709 .flags = IORESOURCE_MEM,
710 },
711 };
712
713 static struct platform_device ep93xx_fb_device = {
714 .name = "ep93xx-fb",
715 .id = -1,
716 .dev = {
717 .platform_data = &ep93xxfb_data,
718 .coherent_dma_mask = DMA_BIT_MASK(32),
719 .dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask,
720 },
721 .num_resources = ARRAY_SIZE(ep93xx_fb_resource),
722 .resource = ep93xx_fb_resource,
723 };
724
725 void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
726 {
727 ep93xxfb_data = *data;
728 platform_device_register(&ep93xx_fb_device);
729 }
730
731 extern void ep93xx_gpio_init(void);
732
733 void __init ep93xx_init_devices(void)
734 {
735 /* Disallow access to MaverickCrunch initially */
736 ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
737
738 ep93xx_gpio_init();
739
740 amba_device_register(&uart1_device, &iomem_resource);
741 amba_device_register(&uart2_device, &iomem_resource);
742 amba_device_register(&uart3_device, &iomem_resource);
743
744 platform_device_register(&ep93xx_rtc_device);
745 platform_device_register(&ep93xx_ohci_device);
746 platform_device_register(&ep93xx_leds);
747 }
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree