2 * Intel IO-APIC support for multi-Pentium hosts.
4 * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
6 * Many thanks to Stig Venaas for trying out countless experimental
7 * patches and reporting/debugging problems patiently!
9 * (c) 1999, Multiple IO-APIC support, developed by
10 * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
11 * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
12 * further tested and cleaned up by Zach Brown <zab@redhat.com>
13 * and Ingo Molnar <mingo@redhat.com>
16 * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
17 * thanks to Eric Gilmore
19 * for testing these extensively
20 * Paul Diefenbaugh : Added full ACPI support
24 #include <linux/interrupt.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/sched.h>
28 #include <linux/pci.h>
29 #include <linux/mc146818rtc.h>
30 #include <linux/acpi.h>
31 #include <linux/sysdev.h>
32 #include <linux/msi.h>
33 #include <linux/htirq.h>
34 #include <linux/dmar.h>
36 #include <acpi/acpi_bus.h>
38 #include <linux/bootmem.h>
44 #include <asm/proto.h>
45 #include <asm/mach_apic.h>
49 #include <asm/msidef.h>
50 #include <asm/hypertransport.h>
55 unsigned move_cleanup_count
;
57 u8 move_in_progress
: 1;
60 /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
61 struct irq_cfg irq_cfg
[NR_IRQS
] __read_mostly
= {
62 [0] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ0_VECTOR
, },
63 [1] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ1_VECTOR
, },
64 [2] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ2_VECTOR
, },
65 [3] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ3_VECTOR
, },
66 [4] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ4_VECTOR
, },
67 [5] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ5_VECTOR
, },
68 [6] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ6_VECTOR
, },
69 [7] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ7_VECTOR
, },
70 [8] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ8_VECTOR
, },
71 [9] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ9_VECTOR
, },
72 [10] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ10_VECTOR
, },
73 [11] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ11_VECTOR
, },
74 [12] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ12_VECTOR
, },
75 [13] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ13_VECTOR
, },
76 [14] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ14_VECTOR
, },
77 [15] = { .domain
= CPU_MASK_ALL
, .vector
= IRQ15_VECTOR
, },
80 static int assign_irq_vector(int irq
, cpumask_t mask
);
82 #define __apicdebuginit __init
84 int sis_apic_bug
; /* not actually supported, dummy for compile */
86 static int no_timer_check
;
88 static int disable_timer_pin_1 __initdata
;
90 int timer_over_8254 __initdata
= 1;
92 /* Where if anywhere is the i8259 connect in external int mode */
93 static struct { int pin
, apic
; } ioapic_i8259
= { -1, -1 };
95 static DEFINE_SPINLOCK(ioapic_lock
);
96 DEFINE_SPINLOCK(vector_lock
);
99 * # of IRQ routing registers
101 int nr_ioapic_registers
[MAX_IO_APICS
];
104 * Rough estimation of how many shared IRQs there are, can
105 * be changed anytime.
107 #define MAX_PLUS_SHARED_IRQS NR_IRQS
108 #define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
111 * This is performance-critical, we want to do it O(1)
113 * the indexing order of this array favors 1:1 mappings
114 * between pins and IRQs.
117 static struct irq_pin_list
{
118 short apic
, pin
, next
;
119 } irq_2_pin
[PIN_MAP_SIZE
];
123 unsigned int unused
[3];
127 static __attribute_const__
struct io_apic __iomem
*io_apic_base(int idx
)
129 return (void __iomem
*) __fix_to_virt(FIX_IO_APIC_BASE_0
+ idx
)
130 + (mp_ioapics
[idx
].mpc_apicaddr
& ~PAGE_MASK
);
133 static inline unsigned int io_apic_read(unsigned int apic
, unsigned int reg
)
135 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
136 writel(reg
, &io_apic
->index
);
137 return readl(&io_apic
->data
);
140 static inline void io_apic_write(unsigned int apic
, unsigned int reg
, unsigned int value
)
142 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
143 writel(reg
, &io_apic
->index
);
144 writel(value
, &io_apic
->data
);
148 * Re-write a value: to be used for read-modify-write
149 * cycles where the read already set up the index register.
151 static inline void io_apic_modify(unsigned int apic
, unsigned int value
)
153 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
154 writel(value
, &io_apic
->data
);
157 static int io_apic_level_ack_pending(unsigned int irq
)
159 struct irq_pin_list
*entry
;
163 spin_lock_irqsave(&ioapic_lock
, flags
);
164 entry
= irq_2_pin
+ irq
;
172 reg
= io_apic_read(entry
->apic
, 0x10 + pin
*2);
173 /* Is the remote IRR bit set? */
174 pending
|= (reg
>> 14) & 1;
177 entry
= irq_2_pin
+ entry
->next
;
179 spin_unlock_irqrestore(&ioapic_lock
, flags
);
184 * Synchronize the IO-APIC and the CPU by doing
185 * a dummy read from the IO-APIC
187 static inline void io_apic_sync(unsigned int apic
)
189 struct io_apic __iomem
*io_apic
= io_apic_base(apic
);
190 readl(&io_apic
->data
);
193 #define __DO_ACTION(R, ACTION, FINAL) \
197 struct irq_pin_list *entry = irq_2_pin + irq; \
199 BUG_ON(irq >= NR_IRQS); \
205 reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \
207 io_apic_modify(entry->apic, reg); \
211 entry = irq_2_pin + entry->next; \
216 struct { u32 w1
, w2
; };
217 struct IO_APIC_route_entry entry
;
220 static struct IO_APIC_route_entry
ioapic_read_entry(int apic
, int pin
)
222 union entry_union eu
;
224 spin_lock_irqsave(&ioapic_lock
, flags
);
225 eu
.w1
= io_apic_read(apic
, 0x10 + 2 * pin
);
226 eu
.w2
= io_apic_read(apic
, 0x11 + 2 * pin
);
227 spin_unlock_irqrestore(&ioapic_lock
, flags
);
232 * When we write a new IO APIC routing entry, we need to write the high
233 * word first! If the mask bit in the low word is clear, we will enable
234 * the interrupt, and we need to make sure the entry is fully populated
235 * before that happens.
238 __ioapic_write_entry(int apic
, int pin
, struct IO_APIC_route_entry e
)
240 union entry_union eu
;
242 io_apic_write(apic
, 0x11 + 2*pin
, eu
.w2
);
243 io_apic_write(apic
, 0x10 + 2*pin
, eu
.w1
);
246 static void ioapic_write_entry(int apic
, int pin
, struct IO_APIC_route_entry e
)
249 spin_lock_irqsave(&ioapic_lock
, flags
);
250 __ioapic_write_entry(apic
, pin
, e
);
251 spin_unlock_irqrestore(&ioapic_lock
, flags
);
255 * When we mask an IO APIC routing entry, we need to write the low
256 * word first, in order to set the mask bit before we change the
259 static void ioapic_mask_entry(int apic
, int pin
)
262 union entry_union eu
= { .entry
.mask
= 1 };
264 spin_lock_irqsave(&ioapic_lock
, flags
);
265 io_apic_write(apic
, 0x10 + 2*pin
, eu
.w1
);
266 io_apic_write(apic
, 0x11 + 2*pin
, eu
.w2
);
267 spin_unlock_irqrestore(&ioapic_lock
, flags
);
271 static void __target_IO_APIC_irq(unsigned int irq
, unsigned int dest
, u8 vector
)
274 struct irq_pin_list
*entry
= irq_2_pin
+ irq
;
276 BUG_ON(irq
>= NR_IRQS
);
283 io_apic_write(apic
, 0x11 + pin
*2, dest
);
284 reg
= io_apic_read(apic
, 0x10 + pin
*2);
287 io_apic_modify(apic
, reg
);
290 entry
= irq_2_pin
+ entry
->next
;
294 static void set_ioapic_affinity_irq(unsigned int irq
, cpumask_t mask
)
296 struct irq_cfg
*cfg
= irq_cfg
+ irq
;
301 cpus_and(tmp
, mask
, cpu_online_map
);
305 if (assign_irq_vector(irq
, mask
))
308 cpus_and(tmp
, cfg
->domain
, mask
);
309 dest
= cpu_mask_to_apicid(tmp
);
312 * Only the high 8 bits are valid.
314 dest
= SET_APIC_LOGICAL_ID(dest
);
316 spin_lock_irqsave(&ioapic_lock
, flags
);
317 __target_IO_APIC_irq(irq
, dest
, cfg
->vector
);
318 irq_desc
[irq
].affinity
= mask
;
319 spin_unlock_irqrestore(&ioapic_lock
, flags
);
324 * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
325 * shared ISA-space IRQs, so we have to support them. We are super
326 * fast in the common case, and fast for shared ISA-space IRQs.
328 static void add_pin_to_irq(unsigned int irq
, int apic
, int pin
)
330 static int first_free_entry
= NR_IRQS
;
331 struct irq_pin_list
*entry
= irq_2_pin
+ irq
;
333 BUG_ON(irq
>= NR_IRQS
);
335 entry
= irq_2_pin
+ entry
->next
;
337 if (entry
->pin
!= -1) {
338 entry
->next
= first_free_entry
;
339 entry
= irq_2_pin
+ entry
->next
;
340 if (++first_free_entry
>= PIN_MAP_SIZE
)
341 panic("io_apic.c: ran out of irq_2_pin entries!");
348 #define DO_ACTION(name,R,ACTION, FINAL) \
350 static void name##_IO_APIC_irq (unsigned int irq) \
351 __DO_ACTION(R, ACTION, FINAL)
353 DO_ACTION( __mask
, 0, |= 0x00010000, io_apic_sync(entry
->apic
) )
355 DO_ACTION( __unmask
, 0, &= 0xfffeffff, )
358 static void mask_IO_APIC_irq (unsigned int irq
)
362 spin_lock_irqsave(&ioapic_lock
, flags
);
363 __mask_IO_APIC_irq(irq
);
364 spin_unlock_irqrestore(&ioapic_lock
, flags
);
367 static void unmask_IO_APIC_irq (unsigned int irq
)
371 spin_lock_irqsave(&ioapic_lock
, flags
);
372 __unmask_IO_APIC_irq(irq
);
373 spin_unlock_irqrestore(&ioapic_lock
, flags
);
376 static void clear_IO_APIC_pin(unsigned int apic
, unsigned int pin
)
378 struct IO_APIC_route_entry entry
;
380 /* Check delivery_mode to be sure we're not clearing an SMI pin */
381 entry
= ioapic_read_entry(apic
, pin
);
382 if (entry
.delivery_mode
== dest_SMI
)
385 * Disable it in the IO-APIC irq-routing table:
387 ioapic_mask_entry(apic
, pin
);
390 static void clear_IO_APIC (void)
394 for (apic
= 0; apic
< nr_ioapics
; apic
++)
395 for (pin
= 0; pin
< nr_ioapic_registers
[apic
]; pin
++)
396 clear_IO_APIC_pin(apic
, pin
);
399 int skip_ioapic_setup
;
402 static int __init
parse_noapic(char *str
)
404 disable_ioapic_setup();
407 early_param("noapic", parse_noapic
);
409 /* Actually the next is obsolete, but keep it for paranoid reasons -AK */
410 static int __init
disable_timer_pin_setup(char *arg
)
412 disable_timer_pin_1
= 1;
415 __setup("disable_timer_pin_1", disable_timer_pin_setup
);
417 static int __init
setup_disable_8254_timer(char *s
)
419 timer_over_8254
= -1;
422 static int __init
setup_enable_8254_timer(char *s
)
428 __setup("disable_8254_timer", setup_disable_8254_timer
);
429 __setup("enable_8254_timer", setup_enable_8254_timer
);
433 * Find the IRQ entry number of a certain pin.
435 static int find_irq_entry(int apic
, int pin
, int type
)
439 for (i
= 0; i
< mp_irq_entries
; i
++)
440 if (mp_irqs
[i
].mpc_irqtype
== type
&&
441 (mp_irqs
[i
].mpc_dstapic
== mp_ioapics
[apic
].mpc_apicid
||
442 mp_irqs
[i
].mpc_dstapic
== MP_APIC_ALL
) &&
443 mp_irqs
[i
].mpc_dstirq
== pin
)
450 * Find the pin to which IRQ[irq] (ISA) is connected
452 static int __init
find_isa_irq_pin(int irq
, int type
)
456 for (i
= 0; i
< mp_irq_entries
; i
++) {
457 int lbus
= mp_irqs
[i
].mpc_srcbus
;
459 if (test_bit(lbus
, mp_bus_not_pci
) &&
460 (mp_irqs
[i
].mpc_irqtype
== type
) &&
461 (mp_irqs
[i
].mpc_srcbusirq
== irq
))
463 return mp_irqs
[i
].mpc_dstirq
;
468 static int __init
find_isa_irq_apic(int irq
, int type
)
472 for (i
= 0; i
< mp_irq_entries
; i
++) {
473 int lbus
= mp_irqs
[i
].mpc_srcbus
;
475 if (test_bit(lbus
, mp_bus_not_pci
) &&
476 (mp_irqs
[i
].mpc_irqtype
== type
) &&
477 (mp_irqs
[i
].mpc_srcbusirq
== irq
))
480 if (i
< mp_irq_entries
) {
482 for(apic
= 0; apic
< nr_ioapics
; apic
++) {
483 if (mp_ioapics
[apic
].mpc_apicid
== mp_irqs
[i
].mpc_dstapic
)
492 * Find a specific PCI IRQ entry.
493 * Not an __init, possibly needed by modules
495 static int pin_2_irq(int idx
, int apic
, int pin
);
497 int IO_APIC_get_PCI_irq_vector(int bus
, int slot
, int pin
)
499 int apic
, i
, best_guess
= -1;
501 apic_printk(APIC_DEBUG
, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
503 if (mp_bus_id_to_pci_bus
[bus
] == -1) {
504 apic_printk(APIC_VERBOSE
, "PCI BIOS passed nonexistent PCI bus %d!\n", bus
);
507 for (i
= 0; i
< mp_irq_entries
; i
++) {
508 int lbus
= mp_irqs
[i
].mpc_srcbus
;
510 for (apic
= 0; apic
< nr_ioapics
; apic
++)
511 if (mp_ioapics
[apic
].mpc_apicid
== mp_irqs
[i
].mpc_dstapic
||
512 mp_irqs
[i
].mpc_dstapic
== MP_APIC_ALL
)
515 if (!test_bit(lbus
, mp_bus_not_pci
) &&
516 !mp_irqs
[i
].mpc_irqtype
&&
518 (slot
== ((mp_irqs
[i
].mpc_srcbusirq
>> 2) & 0x1f))) {
519 int irq
= pin_2_irq(i
,apic
,mp_irqs
[i
].mpc_dstirq
);
521 if (!(apic
|| IO_APIC_IRQ(irq
)))
524 if (pin
== (mp_irqs
[i
].mpc_srcbusirq
& 3))
527 * Use the first all-but-pin matching entry as a
528 * best-guess fuzzy result for broken mptables.
534 BUG_ON(best_guess
>= NR_IRQS
);
538 /* ISA interrupts are always polarity zero edge triggered,
539 * when listed as conforming in the MP table. */
541 #define default_ISA_trigger(idx) (0)
542 #define default_ISA_polarity(idx) (0)
544 /* PCI interrupts are always polarity one level triggered,
545 * when listed as conforming in the MP table. */
547 #define default_PCI_trigger(idx) (1)
548 #define default_PCI_polarity(idx) (1)
550 static int MPBIOS_polarity(int idx
)
552 int bus
= mp_irqs
[idx
].mpc_srcbus
;
556 * Determine IRQ line polarity (high active or low active):
558 switch (mp_irqs
[idx
].mpc_irqflag
& 3)
560 case 0: /* conforms, ie. bus-type dependent polarity */
561 if (test_bit(bus
, mp_bus_not_pci
))
562 polarity
= default_ISA_polarity(idx
);
564 polarity
= default_PCI_polarity(idx
);
566 case 1: /* high active */
571 case 2: /* reserved */
573 printk(KERN_WARNING
"broken BIOS!!\n");
577 case 3: /* low active */
582 default: /* invalid */
584 printk(KERN_WARNING
"broken BIOS!!\n");
592 static int MPBIOS_trigger(int idx
)
594 int bus
= mp_irqs
[idx
].mpc_srcbus
;
598 * Determine IRQ trigger mode (edge or level sensitive):
600 switch ((mp_irqs
[idx
].mpc_irqflag
>>2) & 3)
602 case 0: /* conforms, ie. bus-type dependent */
603 if (test_bit(bus
, mp_bus_not_pci
))
604 trigger
= default_ISA_trigger(idx
);
606 trigger
= default_PCI_trigger(idx
);
613 case 2: /* reserved */
615 printk(KERN_WARNING
"broken BIOS!!\n");
624 default: /* invalid */
626 printk(KERN_WARNING
"broken BIOS!!\n");
634 static inline int irq_polarity(int idx
)
636 return MPBIOS_polarity(idx
);
639 static inline int irq_trigger(int idx
)
641 return MPBIOS_trigger(idx
);
644 static int pin_2_irq(int idx
, int apic
, int pin
)
647 int bus
= mp_irqs
[idx
].mpc_srcbus
;
650 * Debugging check, we are in big trouble if this message pops up!
652 if (mp_irqs
[idx
].mpc_dstirq
!= pin
)
653 printk(KERN_ERR
"broken BIOS or MPTABLE parser, ayiee!!\n");
655 if (test_bit(bus
, mp_bus_not_pci
)) {
656 irq
= mp_irqs
[idx
].mpc_srcbusirq
;
659 * PCI IRQs are mapped in order
663 irq
+= nr_ioapic_registers
[i
++];
666 BUG_ON(irq
>= NR_IRQS
);
670 static int __assign_irq_vector(int irq
, cpumask_t mask
)
673 * NOTE! The local APIC isn't very good at handling
674 * multiple interrupts at the same interrupt level.
675 * As the interrupt level is determined by taking the
676 * vector number and shifting that right by 4, we
677 * want to spread these out a bit so that they don't
678 * all fall in the same interrupt level.
680 * Also, we've got to be careful not to trash gate
681 * 0x80, because int 0x80 is hm, kind of importantish. ;)
683 static int current_vector
= FIRST_DEVICE_VECTOR
, current_offset
= 0;
684 unsigned int old_vector
;
688 BUG_ON((unsigned)irq
>= NR_IRQS
);
691 /* Only try and allocate irqs on cpus that are present */
692 cpus_and(mask
, mask
, cpu_online_map
);
694 if ((cfg
->move_in_progress
) || cfg
->move_cleanup_count
)
697 old_vector
= cfg
->vector
;
700 cpus_and(tmp
, cfg
->domain
, mask
);
701 if (!cpus_empty(tmp
))
705 for_each_cpu_mask(cpu
, mask
) {
706 cpumask_t domain
, new_mask
;
710 domain
= vector_allocation_domain(cpu
);
711 cpus_and(new_mask
, domain
, cpu_online_map
);
713 vector
= current_vector
;
714 offset
= current_offset
;
717 if (vector
>= FIRST_SYSTEM_VECTOR
) {
718 /* If we run out of vectors on large boxen, must share them. */
719 offset
= (offset
+ 1) % 8;
720 vector
= FIRST_DEVICE_VECTOR
+ offset
;
722 if (unlikely(current_vector
== vector
))
724 if (vector
== IA32_SYSCALL_VECTOR
)
726 for_each_cpu_mask(new_cpu
, new_mask
)
727 if (per_cpu(vector_irq
, new_cpu
)[vector
] != -1)
730 current_vector
= vector
;
731 current_offset
= offset
;
733 cfg
->move_in_progress
= 1;
734 cfg
->old_domain
= cfg
->domain
;
736 for_each_cpu_mask(new_cpu
, new_mask
)
737 per_cpu(vector_irq
, new_cpu
)[vector
] = irq
;
738 cfg
->vector
= vector
;
739 cfg
->domain
= domain
;
745 static int assign_irq_vector(int irq
, cpumask_t mask
)
750 spin_lock_irqsave(&vector_lock
, flags
);
751 err
= __assign_irq_vector(irq
, mask
);
752 spin_unlock_irqrestore(&vector_lock
, flags
);
756 static void __clear_irq_vector(int irq
)
762 BUG_ON((unsigned)irq
>= NR_IRQS
);
764 BUG_ON(!cfg
->vector
);
766 vector
= cfg
->vector
;
767 cpus_and(mask
, cfg
->domain
, cpu_online_map
);
768 for_each_cpu_mask(cpu
, mask
)
769 per_cpu(vector_irq
, cpu
)[vector
] = -1;
772 cfg
->domain
= CPU_MASK_NONE
;
775 void __setup_vector_irq(int cpu
)
777 /* Initialize vector_irq on a new cpu */
778 /* This function must be called with vector_lock held */
781 /* Mark the inuse vectors */
782 for (irq
= 0; irq
< NR_IRQS
; ++irq
) {
783 if (!cpu_isset(cpu
, irq_cfg
[irq
].domain
))
785 vector
= irq_cfg
[irq
].vector
;
786 per_cpu(vector_irq
, cpu
)[vector
] = irq
;
788 /* Mark the free vectors */
789 for (vector
= 0; vector
< NR_VECTORS
; ++vector
) {
790 irq
= per_cpu(vector_irq
, cpu
)[vector
];
793 if (!cpu_isset(cpu
, irq_cfg
[irq
].domain
))
794 per_cpu(vector_irq
, cpu
)[vector
] = -1;
799 static struct irq_chip ioapic_chip
;
801 static void ioapic_register_intr(int irq
, unsigned long trigger
)
804 irq_desc
[irq
].status
|= IRQ_LEVEL
;
805 set_irq_chip_and_handler_name(irq
, &ioapic_chip
,
806 handle_fasteoi_irq
, "fasteoi");
808 irq_desc
[irq
].status
&= ~IRQ_LEVEL
;
809 set_irq_chip_and_handler_name(irq
, &ioapic_chip
,
810 handle_edge_irq
, "edge");
814 static void setup_IO_APIC_irq(int apic
, int pin
, unsigned int irq
,
815 int trigger
, int polarity
)
817 struct irq_cfg
*cfg
= irq_cfg
+ irq
;
818 struct IO_APIC_route_entry entry
;
821 if (!IO_APIC_IRQ(irq
))
825 if (assign_irq_vector(irq
, mask
))
828 cpus_and(mask
, cfg
->domain
, mask
);
830 apic_printk(APIC_VERBOSE
,KERN_DEBUG
831 "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
832 "IRQ %d Mode:%i Active:%i)\n",
833 apic
, mp_ioapics
[apic
].mpc_apicid
, pin
, cfg
->vector
,
834 irq
, trigger
, polarity
);
837 * add it to the IO-APIC irq-routing table:
839 memset(&entry
,0,sizeof(entry
));
841 entry
.delivery_mode
= INT_DELIVERY_MODE
;
842 entry
.dest_mode
= INT_DEST_MODE
;
843 entry
.dest
= cpu_mask_to_apicid(mask
);
844 entry
.mask
= 0; /* enable IRQ */
845 entry
.trigger
= trigger
;
846 entry
.polarity
= polarity
;
847 entry
.vector
= cfg
->vector
;
849 /* Mask level triggered irqs.
850 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
855 ioapic_register_intr(irq
, trigger
);
857 disable_8259A_irq(irq
);
859 ioapic_write_entry(apic
, pin
, entry
);
862 static void __init
setup_IO_APIC_irqs(void)
864 int apic
, pin
, idx
, irq
, first_notcon
= 1;
866 apic_printk(APIC_VERBOSE
, KERN_DEBUG
"init IO_APIC IRQs\n");
868 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
869 for (pin
= 0; pin
< nr_ioapic_registers
[apic
]; pin
++) {
871 idx
= find_irq_entry(apic
,pin
,mp_INT
);
874 apic_printk(APIC_VERBOSE
, KERN_DEBUG
" IO-APIC (apicid-pin) %d-%d", mp_ioapics
[apic
].mpc_apicid
, pin
);
877 apic_printk(APIC_VERBOSE
, ", %d-%d", mp_ioapics
[apic
].mpc_apicid
, pin
);
881 apic_printk(APIC_VERBOSE
, " not connected.\n");
885 irq
= pin_2_irq(idx
, apic
, pin
);
886 add_pin_to_irq(irq
, apic
, pin
);
888 setup_IO_APIC_irq(apic
, pin
, irq
,
889 irq_trigger(idx
), irq_polarity(idx
));
894 apic_printk(APIC_VERBOSE
, " not connected.\n");
898 * Set up the 8259A-master output pin as broadcast to all
901 static void __init
setup_ExtINT_IRQ0_pin(unsigned int apic
, unsigned int pin
, int vector
)
903 struct IO_APIC_route_entry entry
;
906 memset(&entry
,0,sizeof(entry
));
908 disable_8259A_irq(0);
911 apic_write(APIC_LVT0
, APIC_LVT_MASKED
| APIC_DM_EXTINT
);
914 * We use logical delivery to get the timer IRQ
917 entry
.dest_mode
= INT_DEST_MODE
;
918 entry
.mask
= 0; /* unmask IRQ now */
919 entry
.dest
= cpu_mask_to_apicid(TARGET_CPUS
);
920 entry
.delivery_mode
= INT_DELIVERY_MODE
;
923 entry
.vector
= vector
;
926 * The timer IRQ doesn't have to know that behind the
927 * scene we have a 8259A-master in AEOI mode ...
929 set_irq_chip_and_handler_name(0, &ioapic_chip
, handle_edge_irq
, "edge");
932 * Add it to the IO-APIC irq-routing table:
934 spin_lock_irqsave(&ioapic_lock
, flags
);
935 io_apic_write(apic
, 0x11+2*pin
, *(((int *)&entry
)+1));
936 io_apic_write(apic
, 0x10+2*pin
, *(((int *)&entry
)+0));
937 spin_unlock_irqrestore(&ioapic_lock
, flags
);
942 void __apicdebuginit
print_IO_APIC(void)
945 union IO_APIC_reg_00 reg_00
;
946 union IO_APIC_reg_01 reg_01
;
947 union IO_APIC_reg_02 reg_02
;
950 if (apic_verbosity
== APIC_QUIET
)
953 printk(KERN_DEBUG
"number of MP IRQ sources: %d.\n", mp_irq_entries
);
954 for (i
= 0; i
< nr_ioapics
; i
++)
955 printk(KERN_DEBUG
"number of IO-APIC #%d registers: %d.\n",
956 mp_ioapics
[i
].mpc_apicid
, nr_ioapic_registers
[i
]);
959 * We are a bit conservative about what we expect. We have to
960 * know about every hardware change ASAP.
962 printk(KERN_INFO
"testing the IO APIC.......................\n");
964 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
966 spin_lock_irqsave(&ioapic_lock
, flags
);
967 reg_00
.raw
= io_apic_read(apic
, 0);
968 reg_01
.raw
= io_apic_read(apic
, 1);
969 if (reg_01
.bits
.version
>= 0x10)
970 reg_02
.raw
= io_apic_read(apic
, 2);
971 spin_unlock_irqrestore(&ioapic_lock
, flags
);
974 printk(KERN_DEBUG
"IO APIC #%d......\n", mp_ioapics
[apic
].mpc_apicid
);
975 printk(KERN_DEBUG
".... register #00: %08X\n", reg_00
.raw
);
976 printk(KERN_DEBUG
"....... : physical APIC id: %02X\n", reg_00
.bits
.ID
);
978 printk(KERN_DEBUG
".... register #01: %08X\n", *(int *)®_01
);
979 printk(KERN_DEBUG
"....... : max redirection entries: %04X\n", reg_01
.bits
.entries
);
981 printk(KERN_DEBUG
"....... : PRQ implemented: %X\n", reg_01
.bits
.PRQ
);
982 printk(KERN_DEBUG
"....... : IO APIC version: %04X\n", reg_01
.bits
.version
);
984 if (reg_01
.bits
.version
>= 0x10) {
985 printk(KERN_DEBUG
".... register #02: %08X\n", reg_02
.raw
);
986 printk(KERN_DEBUG
"....... : arbitration: %02X\n", reg_02
.bits
.arbitration
);
989 printk(KERN_DEBUG
".... IRQ redirection table:\n");
991 printk(KERN_DEBUG
" NR Dst Mask Trig IRR Pol"
992 " Stat Dmod Deli Vect: \n");
994 for (i
= 0; i
<= reg_01
.bits
.entries
; i
++) {
995 struct IO_APIC_route_entry entry
;
997 entry
= ioapic_read_entry(apic
, i
);
999 printk(KERN_DEBUG
" %02x %03X ",
1004 printk("%1d %1d %1d %1d %1d %1d %1d %02X\n",
1009 entry
.delivery_status
,
1011 entry
.delivery_mode
,
1016 printk(KERN_DEBUG
"IRQ to pin mappings:\n");
1017 for (i
= 0; i
< NR_IRQS
; i
++) {
1018 struct irq_pin_list
*entry
= irq_2_pin
+ i
;
1021 printk(KERN_DEBUG
"IRQ%d ", i
);
1023 printk("-> %d:%d", entry
->apic
, entry
->pin
);
1026 entry
= irq_2_pin
+ entry
->next
;
1031 printk(KERN_INFO
".................................... done.\n");
1038 static __apicdebuginit
void print_APIC_bitfield (int base
)
1043 if (apic_verbosity
== APIC_QUIET
)
1046 printk(KERN_DEBUG
"0123456789abcdef0123456789abcdef\n" KERN_DEBUG
);
1047 for (i
= 0; i
< 8; i
++) {
1048 v
= apic_read(base
+ i
*0x10);
1049 for (j
= 0; j
< 32; j
++) {
1059 void __apicdebuginit
print_local_APIC(void * dummy
)
1061 unsigned int v
, ver
, maxlvt
;
1063 if (apic_verbosity
== APIC_QUIET
)
1066 printk("\n" KERN_DEBUG
"printing local APIC contents on CPU#%d/%d:\n",
1067 smp_processor_id(), hard_smp_processor_id());
1068 v
= apic_read(APIC_ID
);
1069 printk(KERN_INFO
"... APIC ID: %08x (%01x)\n", v
, GET_APIC_ID(v
));
1070 v
= apic_read(APIC_LVR
);
1071 printk(KERN_INFO
"... APIC VERSION: %08x\n", v
);
1072 ver
= GET_APIC_VERSION(v
);
1073 maxlvt
= lapic_get_maxlvt();
1075 v
= apic_read(APIC_TASKPRI
);
1076 printk(KERN_DEBUG
"... APIC TASKPRI: %08x (%02x)\n", v
, v
& APIC_TPRI_MASK
);
1078 v
= apic_read(APIC_ARBPRI
);
1079 printk(KERN_DEBUG
"... APIC ARBPRI: %08x (%02x)\n", v
,
1080 v
& APIC_ARBPRI_MASK
);
1081 v
= apic_read(APIC_PROCPRI
);
1082 printk(KERN_DEBUG
"... APIC PROCPRI: %08x\n", v
);
1084 v
= apic_read(APIC_EOI
);
1085 printk(KERN_DEBUG
"... APIC EOI: %08x\n", v
);
1086 v
= apic_read(APIC_RRR
);
1087 printk(KERN_DEBUG
"... APIC RRR: %08x\n", v
);
1088 v
= apic_read(APIC_LDR
);
1089 printk(KERN_DEBUG
"... APIC LDR: %08x\n", v
);
1090 v
= apic_read(APIC_DFR
);
1091 printk(KERN_DEBUG
"... APIC DFR: %08x\n", v
);
1092 v
= apic_read(APIC_SPIV
);
1093 printk(KERN_DEBUG
"... APIC SPIV: %08x\n", v
);
1095 printk(KERN_DEBUG
"... APIC ISR field:\n");
1096 print_APIC_bitfield(APIC_ISR
);
1097 printk(KERN_DEBUG
"... APIC TMR field:\n");
1098 print_APIC_bitfield(APIC_TMR
);
1099 printk(KERN_DEBUG
"... APIC IRR field:\n");
1100 print_APIC_bitfield(APIC_IRR
);
1102 v
= apic_read(APIC_ESR
);
1103 printk(KERN_DEBUG
"... APIC ESR: %08x\n", v
);
1105 v
= apic_read(APIC_ICR
);
1106 printk(KERN_DEBUG
"... APIC ICR: %08x\n", v
);
1107 v
= apic_read(APIC_ICR2
);
1108 printk(KERN_DEBUG
"... APIC ICR2: %08x\n", v
);
1110 v
= apic_read(APIC_LVTT
);
1111 printk(KERN_DEBUG
"... APIC LVTT: %08x\n", v
);
1113 if (maxlvt
> 3) { /* PC is LVT#4. */
1114 v
= apic_read(APIC_LVTPC
);
1115 printk(KERN_DEBUG
"... APIC LVTPC: %08x\n", v
);
1117 v
= apic_read(APIC_LVT0
);
1118 printk(KERN_DEBUG
"... APIC LVT0: %08x\n", v
);
1119 v
= apic_read(APIC_LVT1
);
1120 printk(KERN_DEBUG
"... APIC LVT1: %08x\n", v
);
1122 if (maxlvt
> 2) { /* ERR is LVT#3. */
1123 v
= apic_read(APIC_LVTERR
);
1124 printk(KERN_DEBUG
"... APIC LVTERR: %08x\n", v
);
1127 v
= apic_read(APIC_TMICT
);
1128 printk(KERN_DEBUG
"... APIC TMICT: %08x\n", v
);
1129 v
= apic_read(APIC_TMCCT
);
1130 printk(KERN_DEBUG
"... APIC TMCCT: %08x\n", v
);
1131 v
= apic_read(APIC_TDCR
);
1132 printk(KERN_DEBUG
"... APIC TDCR: %08x\n", v
);
1136 void print_all_local_APICs (void)
1138 on_each_cpu(print_local_APIC
, NULL
, 1, 1);
1141 void __apicdebuginit
print_PIC(void)
1144 unsigned long flags
;
1146 if (apic_verbosity
== APIC_QUIET
)
1149 printk(KERN_DEBUG
"\nprinting PIC contents\n");
1151 spin_lock_irqsave(&i8259A_lock
, flags
);
1153 v
= inb(0xa1) << 8 | inb(0x21);
1154 printk(KERN_DEBUG
"... PIC IMR: %04x\n", v
);
1156 v
= inb(0xa0) << 8 | inb(0x20);
1157 printk(KERN_DEBUG
"... PIC IRR: %04x\n", v
);
1161 v
= inb(0xa0) << 8 | inb(0x20);
1165 spin_unlock_irqrestore(&i8259A_lock
, flags
);
1167 printk(KERN_DEBUG
"... PIC ISR: %04x\n", v
);
1169 v
= inb(0x4d1) << 8 | inb(0x4d0);
1170 printk(KERN_DEBUG
"... PIC ELCR: %04x\n", v
);
1175 void __init
enable_IO_APIC(void)
1177 union IO_APIC_reg_01 reg_01
;
1178 int i8259_apic
, i8259_pin
;
1180 unsigned long flags
;
1182 for (i
= 0; i
< PIN_MAP_SIZE
; i
++) {
1183 irq_2_pin
[i
].pin
= -1;
1184 irq_2_pin
[i
].next
= 0;
1188 * The number of IO-APIC IRQ registers (== #pins):
1190 for (apic
= 0; apic
< nr_ioapics
; apic
++) {
1191 spin_lock_irqsave(&ioapic_lock
, flags
);
1192 reg_01
.raw
= io_apic_read(apic
, 1);
1193 spin_unlock_irqrestore(&ioapic_lock
, flags
);
1194 nr_ioapic_registers
[apic
] = reg_01
.bits
.entries
+1;
1196 for(apic
= 0; apic
< nr_ioapics
; apic
++) {
1198 /* See if any of the pins is in ExtINT mode */
1199 for (pin
= 0; pin
< nr_ioapic_registers
[apic
]; pin
++) {
1200 struct IO_APIC_route_entry entry
;
1201 entry
= ioapic_read_entry(apic
, pin
);
1203 /* If the interrupt line is enabled and in ExtInt mode
1204 * I have found the pin where the i8259 is connected.
1206 if ((entry
.mask
== 0) && (entry
.delivery_mode
== dest_ExtINT
)) {
1207 ioapic_i8259
.apic
= apic
;
1208 ioapic_i8259
.pin
= pin
;
1214 /* Look to see what if the MP table has reported the ExtINT */
1215 i8259_pin
= find_isa_irq_pin(0, mp_ExtINT
);
1216 i8259_apic
= find_isa_irq_apic(0, mp_ExtINT
);
1217 /* Trust the MP table if nothing is setup in the hardware */
1218 if ((ioapic_i8259
.pin
== -1) && (i8259_pin
>= 0)) {
1219 printk(KERN_WARNING
"ExtINT not setup in hardware but reported by MP table\n");
1220 ioapic_i8259
.pin
= i8259_pin
;
1221 ioapic_i8259
.apic
= i8259_apic
;
1223 /* Complain if the MP table and the hardware disagree */
1224 if (((ioapic_i8259
.apic
!= i8259_apic
) || (ioapic_i8259
.pin
!= i8259_pin
)) &&
1225 (i8259_pin
>= 0) && (ioapic_i8259
.pin
>= 0))
1227 printk(KERN_WARNING
"ExtINT in hardware and MP table differ\n");
1231 * Do not trust the IO-APIC being empty at bootup
1237 * Not an __init, needed by the reboot code
1239 void disable_IO_APIC(void)
1242 * Clear the IO-APIC before rebooting:
1247 * If the i8259 is routed through an IOAPIC
1248 * Put that IOAPIC in virtual wire mode
1249 * so legacy interrupts can be delivered.
1251 if (ioapic_i8259
.pin
!= -1) {
1252 struct IO_APIC_route_entry entry
;
1254 memset(&entry
, 0, sizeof(entry
));
1255 entry
.mask
= 0; /* Enabled */
1256 entry
.trigger
= 0; /* Edge */
1258 entry
.polarity
= 0; /* High */
1259 entry
.delivery_status
= 0;
1260 entry
.dest_mode
= 0; /* Physical */
1261 entry
.delivery_mode
= dest_ExtINT
; /* ExtInt */
1263 entry
.dest
= GET_APIC_ID(apic_read(APIC_ID
));
1266 * Add it to the IO-APIC irq-routing table:
1268 ioapic_write_entry(ioapic_i8259
.apic
, ioapic_i8259
.pin
, entry
);
1271 disconnect_bsp_APIC(ioapic_i8259
.pin
!= -1);
1275 * There is a nasty bug in some older SMP boards, their mptable lies
1276 * about the timer IRQ. We do the following to work around the situation:
1278 * - timer IRQ defaults to IO-APIC IRQ
1279 * - if this function detects that timer IRQs are defunct, then we fall
1280 * back to ISA timer IRQs
1282 static int __init
timer_irq_works(void)
1284 unsigned long t1
= jiffies
;
1285 unsigned long flags
;
1287 local_save_flags(flags
);
1289 /* Let ten ticks pass... */
1290 mdelay((10 * 1000) / HZ
);
1291 local_irq_restore(flags
);
1294 * Expect a few ticks at least, to be sure some possible
1295 * glue logic does not lock up after one or two first
1296 * ticks in a non-ExtINT mode. Also the local APIC
1297 * might have cached one ExtINT interrupt. Finally, at
1298 * least one tick may be lost due to delays.
1302 if (jiffies
- t1
> 4)
1308 * In the SMP+IOAPIC case it might happen that there are an unspecified
1309 * number of pending IRQ events unhandled. These cases are very rare,
1310 * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
1311 * better to do it this way as thus we do not have to be aware of
1312 * 'pending' interrupts in the IRQ path, except at this point.
1315 * Edge triggered needs to resend any interrupt
1316 * that was delayed but this is now handled in the device
1321 * Starting up a edge-triggered IO-APIC interrupt is
1322 * nasty - we need to make sure that we get the edge.
1323 * If it is already asserted for some reason, we need
1324 * return 1 to indicate that is was pending.
1326 * This is not complete - we should be able to fake
1327 * an edge even if it isn't on the 8259A...
1330 static unsigned int startup_ioapic_irq(unsigned int irq
)
1332 int was_pending
= 0;
1333 unsigned long flags
;
1335 spin_lock_irqsave(&ioapic_lock
, flags
);
1337 disable_8259A_irq(irq
);
1338 if (i8259A_irq_pending(irq
))
1341 __unmask_IO_APIC_irq(irq
);
1342 spin_unlock_irqrestore(&ioapic_lock
, flags
);
1347 static int ioapic_retrigger_irq(unsigned int irq
)
1349 struct irq_cfg
*cfg
= &irq_cfg
[irq
];
1351 unsigned long flags
;
1353 spin_lock_irqsave(&vector_lock
, flags
);
1355 cpu_set(first_cpu(cfg
->domain
), mask
);
1357 send_IPI_mask(mask
, cfg
->vector
);
1358 spin_unlock_irqrestore(&vector_lock
, flags
);
1364 * Level and edge triggered IO-APIC interrupts need different handling,
1365 * so we use two separate IRQ descriptors. Edge triggered IRQs can be
1366 * handled with the level-triggered descriptor, but that one has slightly
1367 * more overhead. Level-triggered interrupts cannot be handled with the
1368 * edge-triggered handler, without risking IRQ storms and other ugly
1373 asmlinkage
void smp_irq_move_cleanup_interrupt(void)
1375 unsigned vector
, me
;
1380 me
= smp_processor_id();
1381 for (vector
= FIRST_EXTERNAL_VECTOR
; vector
< NR_VECTORS
; vector
++) {
1383 struct irq_desc
*desc
;
1384 struct irq_cfg
*cfg
;
1385 irq
= __get_cpu_var(vector_irq
)[vector
];
1389 desc
= irq_desc
+ irq
;
1390 cfg
= irq_cfg
+ irq
;
1391 spin_lock(&desc
->lock
);
1392 if (!cfg
->move_cleanup_count
)
1395 if ((vector
== cfg
->vector
) && cpu_isset(me
, cfg
->domain
))
1398 __get_cpu_var(vector_irq
)[vector
] = -1;
1399 cfg
->move_cleanup_count
--;
1401 spin_unlock(&desc
->lock
);
1407 static void irq_complete_move(unsigned int irq
)
1409 struct irq_cfg
*cfg
= irq_cfg
+ irq
;
1410 unsigned vector
, me
;
1412 if (likely(!cfg
->move_in_progress
))
1415 vector
= ~get_irq_regs()->orig_ax
;
1416 me
= smp_processor_id();
1417 if ((vector
== cfg
->vector
) && cpu_isset(me
, cfg
->domain
)) {
1418 cpumask_t cleanup_mask
;
1420 cpus_and(cleanup_mask
, cfg
->old_domain
, cpu_online_map
);
1421 cfg
->move_cleanup_count
= cpus_weight(cleanup_mask
);
1422 send_IPI_mask(cleanup_mask
, IRQ_MOVE_CLEANUP_VECTOR
);
1423 cfg
->move_in_progress
= 0;
1427 static inline void irq_complete_move(unsigned int irq
) {}
1430 static void ack_apic_edge(unsigned int irq
)
1432 irq_complete_move(irq
);
1433 move_native_irq(irq
);
1437 static void ack_apic_level(unsigned int irq
)
1439 int do_unmask_irq
= 0;
1441 irq_complete_move(irq
);
1442 #ifdef CONFIG_GENERIC_PENDING_IRQ
1443 /* If we are moving the irq we need to mask it */
1444 if (unlikely(irq_desc
[irq
].status
& IRQ_MOVE_PENDING
)) {
1446 mask_IO_APIC_irq(irq
);
1451 * We must acknowledge the irq before we move it or the acknowledge will
1452 * not propagate properly.
1456 /* Now we can move and renable the irq */
1457 if (unlikely(do_unmask_irq
)) {
1458 /* Only migrate the irq if the ack has been received.
1460 * On rare occasions the broadcast level triggered ack gets
1461 * delayed going to ioapics, and if we reprogram the
1462 * vector while Remote IRR is still set the irq will never
1465 * To prevent this scenario we read the Remote IRR bit
1466 * of the ioapic. This has two effects.
1467 * - On any sane system the read of the ioapic will
1468 * flush writes (and acks) going to the ioapic from
1470 * - We get to see if the ACK has actually been delivered.
1472 * Based on failed experiments of reprogramming the
1473 * ioapic entry from outside of irq context starting
1474 * with masking the ioapic entry and then polling until
1475 * Remote IRR was clear before reprogramming the
1476 * ioapic I don't trust the Remote IRR bit to be
1477 * completey accurate.
1479 * However there appears to be no other way to plug
1480 * this race, so if the Remote IRR bit is not
1481 * accurate and is causing problems then it is a hardware bug
1482 * and you can go talk to the chipset vendor about it.
1484 if (!io_apic_level_ack_pending(irq
))
1485 move_masked_irq(irq
);
1486 unmask_IO_APIC_irq(irq
);
1490 static struct irq_chip ioapic_chip __read_mostly
= {
1492 .startup
= startup_ioapic_irq
,
1493 .mask
= mask_IO_APIC_irq
,
1494 .unmask
= unmask_IO_APIC_irq
,
1495 .ack
= ack_apic_edge
,
1496 .eoi
= ack_apic_level
,
1498 .set_affinity
= set_ioapic_affinity_irq
,
1500 .retrigger
= ioapic_retrigger_irq
,
1503 static inline void init_IO_APIC_traps(void)
1508 * NOTE! The local APIC isn't very good at handling
1509 * multiple interrupts at the same interrupt level.
1510 * As the interrupt level is determined by taking the
1511 * vector number and shifting that right by 4, we
1512 * want to spread these out a bit so that they don't
1513 * all fall in the same interrupt level.
1515 * Also, we've got to be careful not to trash gate
1516 * 0x80, because int 0x80 is hm, kind of importantish. ;)
1518 for (irq
= 0; irq
< NR_IRQS
; irq
++) {
1520 if (IO_APIC_IRQ(tmp
) && !irq_cfg
[tmp
].vector
) {
1522 * Hmm.. We don't have an entry for this,
1523 * so default to an old-fashioned 8259
1524 * interrupt if we can..
1527 make_8259A_irq(irq
);
1529 /* Strange. Oh, well.. */
1530 irq_desc
[irq
].chip
= &no_irq_chip
;
1535 static void enable_lapic_irq (unsigned int irq
)
1539 v
= apic_read(APIC_LVT0
);
1540 apic_write(APIC_LVT0
, v
& ~APIC_LVT_MASKED
);
1543 static void disable_lapic_irq (unsigned int irq
)
1547 v
= apic_read(APIC_LVT0
);
1548 apic_write(APIC_LVT0
, v
| APIC_LVT_MASKED
);
1551 static void ack_lapic_irq (unsigned int irq
)
1556 static void end_lapic_irq (unsigned int i
) { /* nothing */ }
1558 static struct hw_interrupt_type lapic_irq_type __read_mostly
= {
1559 .name
= "local-APIC",
1560 .typename
= "local-APIC-edge",
1561 .startup
= NULL
, /* startup_irq() not used for IRQ0 */
1562 .shutdown
= NULL
, /* shutdown_irq() not used for IRQ0 */
1563 .enable
= enable_lapic_irq
,
1564 .disable
= disable_lapic_irq
,
1565 .ack
= ack_lapic_irq
,
1566 .end
= end_lapic_irq
,
1569 static void setup_nmi (void)
1572 * Dirty trick to enable the NMI watchdog ...
1573 * We put the 8259A master into AEOI mode and
1574 * unmask on all local APICs LVT0 as NMI.
1576 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
1577 * is from Maciej W. Rozycki - so we do not have to EOI from
1578 * the NMI handler or the timer interrupt.
1580 printk(KERN_INFO
"activating NMI Watchdog ...");
1582 enable_NMI_through_LVT0(NULL
);
1588 * This looks a bit hackish but it's about the only one way of sending
1589 * a few INTA cycles to 8259As and any associated glue logic. ICR does
1590 * not support the ExtINT mode, unfortunately. We need to send these
1591 * cycles as some i82489DX-based boards have glue logic that keeps the
1592 * 8259A interrupt line asserted until INTA. --macro
1594 static inline void unlock_ExtINT_logic(void)
1597 struct IO_APIC_route_entry entry0
, entry1
;
1598 unsigned char save_control
, save_freq_select
;
1599 unsigned long flags
;
1601 pin
= find_isa_irq_pin(8, mp_INT
);
1602 apic
= find_isa_irq_apic(8, mp_INT
);
1606 spin_lock_irqsave(&ioapic_lock
, flags
);
1607 *(((int *)&entry0
) + 1) = io_apic_read(apic
, 0x11 + 2 * pin
);
1608 *(((int *)&entry0
) + 0) = io_apic_read(apic
, 0x10 + 2 * pin
);
1609 spin_unlock_irqrestore(&ioapic_lock
, flags
);
1610 clear_IO_APIC_pin(apic
, pin
);
1612 memset(&entry1
, 0, sizeof(entry1
));
1614 entry1
.dest_mode
= 0; /* physical delivery */
1615 entry1
.mask
= 0; /* unmask IRQ now */
1616 entry1
.dest
= hard_smp_processor_id();
1617 entry1
.delivery_mode
= dest_ExtINT
;
1618 entry1
.polarity
= entry0
.polarity
;
1622 spin_lock_irqsave(&ioapic_lock
, flags
);
1623 io_apic_write(apic
, 0x11 + 2 * pin
, *(((int *)&entry1
) + 1));
1624 io_apic_write(apic
, 0x10 + 2 * pin
, *(((int *)&entry1
) + 0));
1625 spin_unlock_irqrestore(&ioapic_lock
, flags
);
1627 save_control
= CMOS_READ(RTC_CONTROL
);
1628 save_freq_select
= CMOS_READ(RTC_FREQ_SELECT
);
1629 CMOS_WRITE((save_freq_select
& ~RTC_RATE_SELECT
) | 0x6,
1631 CMOS_WRITE(save_control
| RTC_PIE
, RTC_CONTROL
);
1636 if ((CMOS_READ(RTC_INTR_FLAGS
) & RTC_PF
) == RTC_PF
)
1640 CMOS_WRITE(save_control
, RTC_CONTROL
);
1641 CMOS_WRITE(save_freq_select
, RTC_FREQ_SELECT
);
1642 clear_IO_APIC_pin(apic
, pin
);
1644 spin_lock_irqsave(&ioapic_lock
, flags
);
1645 io_apic_write(apic
, 0x11 + 2 * pin
, *(((int *)&entry0
) + 1));
1646 io_apic_write(apic
, 0x10 + 2 * pin
, *(((int *)&entry0
) + 0));
1647 spin_unlock_irqrestore(&ioapic_lock
, flags
);
1651 * This code may look a bit paranoid, but it's supposed to cooperate with
1652 * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
1653 * is so screwy. Thanks to Brian Perkins for testing/hacking this beast
1654 * fanatically on his truly buggy board.
1656 * FIXME: really need to revamp this for modern platforms only.
1658 static inline void check_timer(void)
1660 struct irq_cfg
*cfg
= irq_cfg
+ 0;
1661 int apic1
, pin1
, apic2
, pin2
;
1662 unsigned long flags
;
1664 local_irq_save(flags
);
1667 * get/set the timer IRQ vector:
1669 disable_8259A_irq(0);
1670 assign_irq_vector(0, TARGET_CPUS
);
1673 * Subtle, code in do_timer_interrupt() expects an AEOI
1674 * mode for the 8259A whenever interrupts are routed
1675 * through I/O APICs. Also IRQ0 has to be enabled in
1676 * the 8259A which implies the virtual wire has to be
1677 * disabled in the local APIC.
1679 apic_write(APIC_LVT0
, APIC_LVT_MASKED
| APIC_DM_EXTINT
);
1681 if (timer_over_8254
> 0)
1682 enable_8259A_irq(0);
1684 pin1
= find_isa_irq_pin(0, mp_INT
);
1685 apic1
= find_isa_irq_apic(0, mp_INT
);
1686 pin2
= ioapic_i8259
.pin
;
1687 apic2
= ioapic_i8259
.apic
;
1689 apic_printk(APIC_VERBOSE
,KERN_INFO
"..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
1690 cfg
->vector
, apic1
, pin1
, apic2
, pin2
);
1694 * Ok, does IRQ0 through the IOAPIC work?
1696 unmask_IO_APIC_irq(0);
1697 if (!no_timer_check
&& timer_irq_works()) {
1698 nmi_watchdog_default();
1699 if (nmi_watchdog
== NMI_IO_APIC
) {
1700 disable_8259A_irq(0);
1702 enable_8259A_irq(0);
1704 if (disable_timer_pin_1
> 0)
1705 clear_IO_APIC_pin(0, pin1
);
1708 clear_IO_APIC_pin(apic1
, pin1
);
1709 apic_printk(APIC_QUIET
,KERN_ERR
"..MP-BIOS bug: 8254 timer not "
1710 "connected to IO-APIC\n");
1713 apic_printk(APIC_VERBOSE
,KERN_INFO
"...trying to set up timer (IRQ0) "
1714 "through the 8259A ... ");
1716 apic_printk(APIC_VERBOSE
,"\n..... (found apic %d pin %d) ...",
1719 * legacy devices should be connected to IO APIC #0
1721 setup_ExtINT_IRQ0_pin(apic2
, pin2
, cfg
->vector
);
1722 if (timer_irq_works()) {
1723 apic_printk(APIC_VERBOSE
," works.\n");
1724 nmi_watchdog_default();
1725 if (nmi_watchdog
== NMI_IO_APIC
) {
1731 * Cleanup, just in case ...
1733 clear_IO_APIC_pin(apic2
, pin2
);
1735 apic_printk(APIC_VERBOSE
," failed.\n");
1737 if (nmi_watchdog
== NMI_IO_APIC
) {
1738 printk(KERN_WARNING
"timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
1742 apic_printk(APIC_VERBOSE
, KERN_INFO
"...trying to set up timer as Virtual Wire IRQ...");
1744 disable_8259A_irq(0);
1745 irq_desc
[0].chip
= &lapic_irq_type
;
1746 apic_write(APIC_LVT0
, APIC_DM_FIXED
| cfg
->vector
); /* Fixed mode */
1747 enable_8259A_irq(0);
1749 if (timer_irq_works()) {
1750 apic_printk(APIC_VERBOSE
," works.\n");
1753 apic_write(APIC_LVT0
, APIC_LVT_MASKED
| APIC_DM_FIXED
| cfg
->vector
);
1754 apic_printk(APIC_VERBOSE
," failed.\n");
1756 apic_printk(APIC_VERBOSE
, KERN_INFO
"...trying to set up timer as ExtINT IRQ...");
1760 apic_write(APIC_LVT0
, APIC_DM_EXTINT
);
1762 unlock_ExtINT_logic();
1764 if (timer_irq_works()) {
1765 apic_printk(APIC_VERBOSE
," works.\n");
1768 apic_printk(APIC_VERBOSE
," failed :(.\n");
1769 panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n");
1771 local_irq_restore(flags
);
1774 static int __init
notimercheck(char *s
)
1779 __setup("no_timer_check", notimercheck
);
1783 * IRQs that are handled by the PIC in the MPS IOAPIC case.
1784 * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
1785 * Linux doesn't really care, as it's not actually used
1786 * for any interrupt handling anyway.
1788 #define PIC_IRQS (1<<2)
1790 void __init
setup_IO_APIC(void)
1794 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
1798 io_apic_irqs
= ~0; /* all IRQs go through IOAPIC */
1800 io_apic_irqs
= ~PIC_IRQS
;
1802 apic_printk(APIC_VERBOSE
, "ENABLING IO-APIC IRQs\n");
1805 setup_IO_APIC_irqs();
1806 init_IO_APIC_traps();
1812 struct sysfs_ioapic_data
{
1813 struct sys_device dev
;
1814 struct IO_APIC_route_entry entry
[0];
1816 static struct sysfs_ioapic_data
* mp_ioapic_data
[MAX_IO_APICS
];
1818 static int ioapic_suspend(struct sys_device
*dev
, pm_message_t state
)
1820 struct IO_APIC_route_entry
*entry
;
1821 struct sysfs_ioapic_data
*data
;
1824 data
= container_of(dev
, struct sysfs_ioapic_data
, dev
);
1825 entry
= data
->entry
;
1826 for (i
= 0; i
< nr_ioapic_registers
[dev
->id
]; i
++, entry
++ )
1827 *entry
= ioapic_read_entry(dev
->id
, i
);
1832 static int ioapic_resume(struct sys_device
*dev
)
1834 struct IO_APIC_route_entry
*entry
;
1835 struct sysfs_ioapic_data
*data
;
1836 unsigned long flags
;
1837 union IO_APIC_reg_00 reg_00
;
1840 data
= container_of(dev
, struct sysfs_ioapic_data
, dev
);
1841 entry
= data
->entry
;
1843 spin_lock_irqsave(&ioapic_lock
, flags
);
1844 reg_00
.raw
= io_apic_read(dev
->id
, 0);
1845 if (reg_00
.bits
.ID
!= mp_ioapics
[dev
->id
].mpc_apicid
) {
1846 reg_00
.bits
.ID
= mp_ioapics
[dev
->id
].mpc_apicid
;
1847 io_apic_write(dev
->id
, 0, reg_00
.raw
);
1849 spin_unlock_irqrestore(&ioapic_lock
, flags
);
1850 for (i
= 0; i
< nr_ioapic_registers
[dev
->id
]; i
++)
1851 ioapic_write_entry(dev
->id
, i
, entry
[i
]);
1856 static struct sysdev_class ioapic_sysdev_class
= {
1858 .suspend
= ioapic_suspend
,
1859 .resume
= ioapic_resume
,
1862 static int __init
ioapic_init_sysfs(void)
1864 struct sys_device
* dev
;
1867 error
= sysdev_class_register(&ioapic_sysdev_class
);
1871 for (i
= 0; i
< nr_ioapics
; i
++ ) {
1872 size
= sizeof(struct sys_device
) + nr_ioapic_registers
[i
]
1873 * sizeof(struct IO_APIC_route_entry
);
1874 mp_ioapic_data
[i
] = kzalloc(size
, GFP_KERNEL
);
1875 if (!mp_ioapic_data
[i
]) {
1876 printk(KERN_ERR
"Can't suspend/resume IOAPIC %d\n", i
);
1879 dev
= &mp_ioapic_data
[i
]->dev
;
1881 dev
->cls
= &ioapic_sysdev_class
;
1882 error
= sysdev_register(dev
);
1884 kfree(mp_ioapic_data
[i
]);
1885 mp_ioapic_data
[i
] = NULL
;
1886 printk(KERN_ERR
"Can't suspend/resume IOAPIC %d\n", i
);
1894 device_initcall(ioapic_init_sysfs
);
1897 * Dynamic irq allocate and deallocation
1899 int create_irq(void)
1901 /* Allocate an unused irq */
1904 unsigned long flags
;
1907 spin_lock_irqsave(&vector_lock
, flags
);
1908 for (new = (NR_IRQS
- 1); new >= 0; new--) {
1909 if (platform_legacy_irq(new))
1911 if (irq_cfg
[new].vector
!= 0)
1913 if (__assign_irq_vector(new, TARGET_CPUS
) == 0)
1917 spin_unlock_irqrestore(&vector_lock
, flags
);
1920 dynamic_irq_init(irq
);
1925 void destroy_irq(unsigned int irq
)
1927 unsigned long flags
;
1929 dynamic_irq_cleanup(irq
);
1931 spin_lock_irqsave(&vector_lock
, flags
);
1932 __clear_irq_vector(irq
);
1933 spin_unlock_irqrestore(&vector_lock
, flags
);
1937 * MSI message composition
1939 #ifdef CONFIG_PCI_MSI
1940 static int msi_compose_msg(struct pci_dev
*pdev
, unsigned int irq
, struct msi_msg
*msg
)
1942 struct irq_cfg
*cfg
= irq_cfg
+ irq
;
1948 err
= assign_irq_vector(irq
, tmp
);
1950 cpus_and(tmp
, cfg
->domain
, tmp
);
1951 dest
= cpu_mask_to_apicid(tmp
);
1953 msg
->address_hi
= MSI_ADDR_BASE_HI
;
1956 ((INT_DEST_MODE
== 0) ?
1957 MSI_ADDR_DEST_MODE_PHYSICAL
:
1958 MSI_ADDR_DEST_MODE_LOGICAL
) |
1959 ((INT_DELIVERY_MODE
!= dest_LowestPrio
) ?
1960 MSI_ADDR_REDIRECTION_CPU
:
1961 MSI_ADDR_REDIRECTION_LOWPRI
) |
1962 MSI_ADDR_DEST_ID(dest
);
1965 MSI_DATA_TRIGGER_EDGE
|
1966 MSI_DATA_LEVEL_ASSERT
|
1967 ((INT_DELIVERY_MODE
!= dest_LowestPrio
) ?
1968 MSI_DATA_DELIVERY_FIXED
:
1969 MSI_DATA_DELIVERY_LOWPRI
) |
1970 MSI_DATA_VECTOR(cfg
->vector
);
1976 static void set_msi_irq_affinity(unsigned int irq
, cpumask_t mask
)
1978 struct irq_cfg
*cfg
= irq_cfg
+ irq
;
1983 cpus_and(tmp
, mask
, cpu_online_map
);
1984 if (cpus_empty(tmp
))
1987 if (assign_irq_vector(irq
, mask
))
1990 cpus_and(tmp
, cfg
->domain
, mask
);
1991 dest
= cpu_mask_to_apicid(tmp
);
1993 read_msi_msg(irq
, &msg
);
1995 msg
.data
&= ~MSI_DATA_VECTOR_MASK
;
1996 msg
.data
|= MSI_DATA_VECTOR(cfg
->vector
);
1997 msg
.address_lo
&= ~MSI_ADDR_DEST_ID_MASK
;
1998 msg
.address_lo
|= MSI_ADDR_DEST_ID(dest
);
2000 write_msi_msg(irq
, &msg
);
2001 irq_desc
[irq
].affinity
= mask
;
2003 #endif /* CONFIG_SMP */
2006 * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
2007 * which implement the MSI or MSI-X Capability Structure.
2009 static struct irq_chip msi_chip
= {
2011 .unmask
= unmask_msi_irq
,
2012 .mask
= mask_msi_irq
,
2013 .ack
= ack_apic_edge
,
2015 .set_affinity
= set_msi_irq_affinity
,
2017 .retrigger
= ioapic_retrigger_irq
,
2020 int arch_setup_msi_irq(struct pci_dev
*dev
, struct msi_desc
*desc
)
2028 ret
= msi_compose_msg(dev
, irq
, &msg
);
2034 set_irq_msi(irq
, desc
);
2035 write_msi_msg(irq
, &msg
);
2037 set_irq_chip_and_handler_name(irq
, &msi_chip
, handle_edge_irq
, "edge");
2042 void arch_teardown_msi_irq(unsigned int irq
)
2049 static void dmar_msi_set_affinity(unsigned int irq
, cpumask_t mask
)
2051 struct irq_cfg
*cfg
= irq_cfg
+ irq
;
2056 cpus_and(tmp
, mask
, cpu_online_map
);
2057 if (cpus_empty(tmp
))
2060 if (assign_irq_vector(irq
, mask
))
2063 cpus_and(tmp
, cfg
->domain
, mask
);
2064 dest
= cpu_mask_to_apicid(tmp
);
2066 dmar_msi_read(irq
, &msg
);
2068 msg
.data
&= ~MSI_DATA_VECTOR_MASK
;
2069 msg
.data
|= MSI_DATA_VECTOR(cfg
->vector
);
2070 msg
.address_lo
&= ~MSI_ADDR_DEST_ID_MASK
;
2071 msg
.address_lo
|= MSI_ADDR_DEST_ID(dest
);
2073 dmar_msi_write(irq
, &msg
);
2074 irq_desc
[irq
].affinity
= mask
;
2076 #endif /* CONFIG_SMP */
2078 struct irq_chip dmar_msi_type
= {
2080 .unmask
= dmar_msi_unmask
,
2081 .mask
= dmar_msi_mask
,
2082 .ack
= ack_apic_edge
,
2084 .set_affinity
= dmar_msi_set_affinity
,
2086 .retrigger
= ioapic_retrigger_irq
,
2089 int arch_setup_dmar_msi(unsigned int irq
)
2094 ret
= msi_compose_msg(NULL
, irq
, &msg
);
2097 dmar_msi_write(irq
, &msg
);
2098 set_irq_chip_and_handler_name(irq
, &dmar_msi_type
, handle_edge_irq
,
2104 #endif /* CONFIG_PCI_MSI */
2106 * Hypertransport interrupt support
2108 #ifdef CONFIG_HT_IRQ
2112 static void target_ht_irq(unsigned int irq
, unsigned int dest
, u8 vector
)
2114 struct ht_irq_msg msg
;
2115 fetch_ht_irq_msg(irq
, &msg
);
2117 msg
.address_lo
&= ~(HT_IRQ_LOW_VECTOR_MASK
| HT_IRQ_LOW_DEST_ID_MASK
);
2118 msg
.address_hi
&= ~(HT_IRQ_HIGH_DEST_ID_MASK
);
2120 msg
.address_lo
|= HT_IRQ_LOW_VECTOR(vector
) | HT_IRQ_LOW_DEST_ID(dest
);
2121 msg
.address_hi
|= HT_IRQ_HIGH_DEST_ID(dest
);
2123 write_ht_irq_msg(irq
, &msg
);
2126 static void set_ht_irq_affinity(unsigned int irq
, cpumask_t mask
)
2128 struct irq_cfg
*cfg
= irq_cfg
+ irq
;
2132 cpus_and(tmp
, mask
, cpu_online_map
);
2133 if (cpus_empty(tmp
))
2136 if (assign_irq_vector(irq
, mask
))
2139 cpus_and(tmp
, cfg
->domain
, mask
);
2140 dest
= cpu_mask_to_apicid(tmp
);
2142 target_ht_irq(irq
, dest
, cfg
->vector
);
2143 irq_desc
[irq
].affinity
= mask
;
2147 static struct irq_chip ht_irq_chip
= {
2149 .mask
= mask_ht_irq
,
2150 .unmask
= unmask_ht_irq
,
2151 .ack
= ack_apic_edge
,
2153 .set_affinity
= set_ht_irq_affinity
,
2155 .retrigger
= ioapic_retrigger_irq
,
2158 int arch_setup_ht_irq(unsigned int irq
, struct pci_dev
*dev
)
2160 struct irq_cfg
*cfg
= irq_cfg
+ irq
;
2165 err
= assign_irq_vector(irq
, tmp
);
2167 struct ht_irq_msg msg
;
2170 cpus_and(tmp
, cfg
->domain
, tmp
);
2171 dest
= cpu_mask_to_apicid(tmp
);
2173 msg
.address_hi
= HT_IRQ_HIGH_DEST_ID(dest
);
2177 HT_IRQ_LOW_DEST_ID(dest
) |
2178 HT_IRQ_LOW_VECTOR(cfg
->vector
) |
2179 ((INT_DEST_MODE
== 0) ?
2180 HT_IRQ_LOW_DM_PHYSICAL
:
2181 HT_IRQ_LOW_DM_LOGICAL
) |
2182 HT_IRQ_LOW_RQEOI_EDGE
|
2183 ((INT_DELIVERY_MODE
!= dest_LowestPrio
) ?
2184 HT_IRQ_LOW_MT_FIXED
:
2185 HT_IRQ_LOW_MT_ARBITRATED
) |
2186 HT_IRQ_LOW_IRQ_MASKED
;
2188 write_ht_irq_msg(irq
, &msg
);
2190 set_irq_chip_and_handler_name(irq
, &ht_irq_chip
,
2191 handle_edge_irq
, "edge");
2195 #endif /* CONFIG_HT_IRQ */
2197 /* --------------------------------------------------------------------------
2198 ACPI-based IOAPIC Configuration
2199 -------------------------------------------------------------------------- */
2203 #define IO_APIC_MAX_ID 0xFE
2205 int __init
io_apic_get_redir_entries (int ioapic
)
2207 union IO_APIC_reg_01 reg_01
;
2208 unsigned long flags
;
2210 spin_lock_irqsave(&ioapic_lock
, flags
);
2211 reg_01
.raw
= io_apic_read(ioapic
, 1);
2212 spin_unlock_irqrestore(&ioapic_lock
, flags
);
2214 return reg_01
.bits
.entries
;
2218 int io_apic_set_pci_routing (int ioapic
, int pin
, int irq
, int triggering
, int polarity
)
2220 if (!IO_APIC_IRQ(irq
)) {
2221 apic_printk(APIC_QUIET
,KERN_ERR
"IOAPIC[%d]: Invalid reference to IRQ 0\n",
2227 * IRQs < 16 are already in the irq_2_pin[] map
2230 add_pin_to_irq(irq
, ioapic
, pin
);
2232 setup_IO_APIC_irq(ioapic
, pin
, irq
, triggering
, polarity
);
2238 int acpi_get_override_irq(int bus_irq
, int *trigger
, int *polarity
)
2242 if (skip_ioapic_setup
)
2245 for (i
= 0; i
< mp_irq_entries
; i
++)
2246 if (mp_irqs
[i
].mpc_irqtype
== mp_INT
&&
2247 mp_irqs
[i
].mpc_srcbusirq
== bus_irq
)
2249 if (i
>= mp_irq_entries
)
2252 *trigger
= irq_trigger(i
);
2253 *polarity
= irq_polarity(i
);
2257 #endif /* CONFIG_ACPI */
2260 * This function currently is only a helper for the i386 smp boot process where
2261 * we need to reprogram the ioredtbls to cater for the cpus which have come online
2262 * so mask in all cases should simply be TARGET_CPUS
2265 void __init
setup_ioapic_dest(void)
2267 int pin
, ioapic
, irq
, irq_entry
;
2269 if (skip_ioapic_setup
== 1)
2272 for (ioapic
= 0; ioapic
< nr_ioapics
; ioapic
++) {
2273 for (pin
= 0; pin
< nr_ioapic_registers
[ioapic
]; pin
++) {
2274 irq_entry
= find_irq_entry(ioapic
, pin
, mp_INT
);
2275 if (irq_entry
== -1)
2277 irq
= pin_2_irq(irq_entry
, ioapic
, pin
);
2279 /* setup_IO_APIC_irqs could fail to get vector for some device
2280 * when you have too many devices, because at that time only boot
2283 if (!irq_cfg
[irq
].vector
)
2284 setup_IO_APIC_irq(ioapic
, pin
, irq
,
2285 irq_trigger(irq_entry
),
2286 irq_polarity(irq_entry
));
2288 set_ioapic_affinity_irq(irq
, TARGET_CPUS
);
2295 #define IOAPIC_RESOURCE_NAME_SIZE 11
2297 static struct resource
*ioapic_resources
;
2299 static struct resource
* __init
ioapic_setup_resources(void)
2302 struct resource
*res
;
2306 if (nr_ioapics
<= 0)
2309 n
= IOAPIC_RESOURCE_NAME_SIZE
+ sizeof(struct resource
);
2312 mem
= alloc_bootmem(n
);
2317 mem
+= sizeof(struct resource
) * nr_ioapics
;
2319 for (i
= 0; i
< nr_ioapics
; i
++) {
2321 res
[i
].flags
= IORESOURCE_MEM
| IORESOURCE_BUSY
;
2322 sprintf(mem
, "IOAPIC %u", i
);
2323 mem
+= IOAPIC_RESOURCE_NAME_SIZE
;
2327 ioapic_resources
= res
;
2332 void __init
ioapic_init_mappings(void)
2334 unsigned long ioapic_phys
, idx
= FIX_IO_APIC_BASE_0
;
2335 struct resource
*ioapic_res
;
2338 ioapic_res
= ioapic_setup_resources();
2339 for (i
= 0; i
< nr_ioapics
; i
++) {
2340 if (smp_found_config
) {
2341 ioapic_phys
= mp_ioapics
[i
].mpc_apicaddr
;
2343 ioapic_phys
= (unsigned long)
2344 alloc_bootmem_pages(PAGE_SIZE
);
2345 ioapic_phys
= __pa(ioapic_phys
);
2347 set_fixmap_nocache(idx
, ioapic_phys
);
2348 apic_printk(APIC_VERBOSE
,
2349 "mapped IOAPIC to %016lx (%016lx)\n",
2350 __fix_to_virt(idx
), ioapic_phys
);
2353 if (ioapic_res
!= NULL
) {
2354 ioapic_res
->start
= ioapic_phys
;
2355 ioapic_res
->end
= ioapic_phys
+ (4 * 1024) - 1;
2361 static int __init
ioapic_insert_resources(void)
2364 struct resource
*r
= ioapic_resources
;
2368 "IO APIC resources could be not be allocated.\n");
2372 for (i
= 0; i
< nr_ioapics
; i
++) {
2373 insert_resource(&iomem_resource
, r
);
2380 /* Insert the IO APIC resources after PCI initialization has occured to handle
2381 * IO APICS that are mapped in on a BAR in PCI space. */
2382 late_initcall(ioapic_insert_resources
);