arm: remove machine_desc.io_pg_offst and .phys_io
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / arm / mach-gemini / board-wbd111.c
blob8b88d50d4337db51378737a70bfd4bc2959b7b3b
1 /*
2 * Support for Wiliboard WBD-111
4 * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/platform_device.h>
14 #include <linux/leds.h>
15 #include <linux/input.h>
16 #include <linux/skbuff.h>
17 #include <linux/gpio_keys.h>
18 #include <linux/mdio-gpio.h>
19 #include <linux/mtd/mtd.h>
20 #include <linux/mtd/partitions.h>
21 #include <asm/mach-types.h>
22 #include <asm/mach/arch.h>
23 #include <asm/mach/time.h>
26 #include "common.h"
28 static struct gpio_keys_button wbd111_keys[] = {
30 .code = KEY_SETUP,
31 .gpio = 5,
32 .active_low = 1,
33 .desc = "reset",
34 .type = EV_KEY,
38 static struct gpio_keys_platform_data wbd111_keys_data = {
39 .buttons = wbd111_keys,
40 .nbuttons = ARRAY_SIZE(wbd111_keys),
43 static struct platform_device wbd111_keys_device = {
44 .name = "gpio-keys",
45 .id = -1,
46 .dev = {
47 .platform_data = &wbd111_keys_data,
51 static struct gpio_led wbd111_leds[] = {
53 .name = "L3red",
54 .gpio = 1,
57 .name = "L4green",
58 .gpio = 2,
61 .name = "L4red",
62 .gpio = 3,
65 .name = "L3green",
66 .gpio = 5,
70 static struct gpio_led_platform_data wbd111_leds_data = {
71 .num_leds = ARRAY_SIZE(wbd111_leds),
72 .leds = wbd111_leds,
75 static struct platform_device wbd111_leds_device = {
76 .name = "leds-gpio",
77 .id = -1,
78 .dev = {
79 .platform_data = &wbd111_leds_data,
83 static struct sys_timer wbd111_timer = {
84 .init = gemini_timer_init,
87 #ifdef CONFIG_MTD_PARTITIONS
88 static struct mtd_partition wbd111_partitions[] = {
90 .name = "RedBoot",
91 .offset = 0,
92 .size = 0x020000,
93 .mask_flags = MTD_WRITEABLE,
94 } , {
95 .name = "kernel",
96 .offset = 0x020000,
97 .size = 0x100000,
98 } , {
99 .name = "rootfs",
100 .offset = 0x120000,
101 .size = 0x6a0000,
102 } , {
103 .name = "VCTL",
104 .offset = 0x7c0000,
105 .size = 0x010000,
106 .mask_flags = MTD_WRITEABLE,
107 } , {
108 .name = "cfg",
109 .offset = 0x7d0000,
110 .size = 0x010000,
111 .mask_flags = MTD_WRITEABLE,
112 } , {
113 .name = "FIS",
114 .offset = 0x7e0000,
115 .size = 0x010000,
116 .mask_flags = MTD_WRITEABLE,
119 #define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions)
120 #else
121 #define wbd111_partitions NULL
122 #define wbd111_num_partitions 0
123 #endif /* CONFIG_MTD_PARTITIONS */
125 static void __init wbd111_init(void)
127 gemini_gpio_init();
128 platform_register_uart();
129 platform_register_pflash(SZ_8M, wbd111_partitions,
130 wbd111_num_partitions);
131 platform_device_register(&wbd111_leds_device);
132 platform_device_register(&wbd111_keys_device);
135 MACHINE_START(WBD111, "Wiliboard WBD-111")
136 .boot_params = 0x100,
137 .map_io = gemini_map_io,
138 .init_irq = gemini_init_irq,
139 .timer = &wbd111_timer,
140 .init_machine = wbd111_init,
141 MACHINE_END