staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XVII
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / video / mxsfb.c
blob0b2f2dd41416c0cb17f992fcf80dd33c47871bd8
1 /*
2 * Copyright (C) 2010 Juergen Beisert, Pengutronix
4 * This code is based on:
5 * Author: Vitaly Wool <vital@embeddedalley.com>
7 * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
8 * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version 2
13 * of the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
20 #define DRIVER_NAME "mxsfb"
22 /**
23 * @file
24 * @brief LCDIF driver for i.MX23 and i.MX28
26 * The LCDIF support four modes of operation
27 * - MPU interface (to drive smart displays) -> not supported yet
28 * - VSYNC interface (like MPU interface plus Vsync) -> not supported yet
29 * - Dotclock interface (to drive LC displays with RGB data and sync signals)
30 * - DVI (to drive ITU-R BT656) -> not supported yet
32 * This driver depends on a correct setup of the pins used for this purpose
33 * (platform specific).
35 * For the developer: Don't forget to set the data bus width to the display
36 * in the imx_fb_videomode structure. You will else end up with ugly colours.
37 * If you fight against jitter you can vary the clock delay. This is a feature
38 * of the i.MX28 and you can vary it between 2 ns ... 8 ns in 2 ns steps. Give
39 * the required value in the imx_fb_videomode structure.
42 #include <linux/kernel.h>
43 #include <linux/platform_device.h>
44 #include <linux/clk.h>
45 #include <linux/dma-mapping.h>
46 #include <linux/io.h>
47 #include <mach/mxsfb.h>
49 #define REG_SET 4
50 #define REG_CLR 8
52 #define LCDC_CTRL 0x00
53 #define LCDC_CTRL1 0x10
54 #define LCDC_V4_CTRL2 0x20
55 #define LCDC_V3_TRANSFER_COUNT 0x20
56 #define LCDC_V4_TRANSFER_COUNT 0x30
57 #define LCDC_V4_CUR_BUF 0x40
58 #define LCDC_V4_NEXT_BUF 0x50
59 #define LCDC_V3_CUR_BUF 0x30
60 #define LCDC_V3_NEXT_BUF 0x40
61 #define LCDC_TIMING 0x60
62 #define LCDC_VDCTRL0 0x70
63 #define LCDC_VDCTRL1 0x80
64 #define LCDC_VDCTRL2 0x90
65 #define LCDC_VDCTRL3 0xa0
66 #define LCDC_VDCTRL4 0xb0
67 #define LCDC_DVICTRL0 0xc0
68 #define LCDC_DVICTRL1 0xd0
69 #define LCDC_DVICTRL2 0xe0
70 #define LCDC_DVICTRL3 0xf0
71 #define LCDC_DVICTRL4 0x100
72 #define LCDC_V4_DATA 0x180
73 #define LCDC_V3_DATA 0x1b0
74 #define LCDC_V4_DEBUG0 0x1d0
75 #define LCDC_V3_DEBUG0 0x1f0
77 #define CTRL_SFTRST (1 << 31)
78 #define CTRL_CLKGATE (1 << 30)
79 #define CTRL_BYPASS_COUNT (1 << 19)
80 #define CTRL_VSYNC_MODE (1 << 18)
81 #define CTRL_DOTCLK_MODE (1 << 17)
82 #define CTRL_DATA_SELECT (1 << 16)
83 #define CTRL_SET_BUS_WIDTH(x) (((x) & 0x3) << 10)
84 #define CTRL_GET_BUS_WIDTH(x) (((x) >> 10) & 0x3)
85 #define CTRL_SET_WORD_LENGTH(x) (((x) & 0x3) << 8)
86 #define CTRL_GET_WORD_LENGTH(x) (((x) >> 8) & 0x3)
87 #define CTRL_MASTER (1 << 5)
88 #define CTRL_DF16 (1 << 3)
89 #define CTRL_DF18 (1 << 2)
90 #define CTRL_DF24 (1 << 1)
91 #define CTRL_RUN (1 << 0)
93 #define CTRL1_FIFO_CLEAR (1 << 21)
94 #define CTRL1_SET_BYTE_PACKAGING(x) (((x) & 0xf) << 16)
95 #define CTRL1_GET_BYTE_PACKAGING(x) (((x) >> 16) & 0xf)
97 #define TRANSFER_COUNT_SET_VCOUNT(x) (((x) & 0xffff) << 16)
98 #define TRANSFER_COUNT_GET_VCOUNT(x) (((x) >> 16) & 0xffff)
99 #define TRANSFER_COUNT_SET_HCOUNT(x) ((x) & 0xffff)
100 #define TRANSFER_COUNT_GET_HCOUNT(x) ((x) & 0xffff)
103 #define VDCTRL0_ENABLE_PRESENT (1 << 28)
104 #define VDCTRL0_VSYNC_ACT_HIGH (1 << 27)
105 #define VDCTRL0_HSYNC_ACT_HIGH (1 << 26)
106 #define VDCTRL0_DOTCLK_ACT_FAILING (1 << 25)
107 #define VDCTRL0_ENABLE_ACT_HIGH (1 << 24)
108 #define VDCTRL0_VSYNC_PERIOD_UNIT (1 << 21)
109 #define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT (1 << 20)
110 #define VDCTRL0_HALF_LINE (1 << 19)
111 #define VDCTRL0_HALF_LINE_MODE (1 << 18)
112 #define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
113 #define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
115 #define VDCTRL2_SET_HSYNC_PERIOD(x) ((x) & 0x3ffff)
116 #define VDCTRL2_GET_HSYNC_PERIOD(x) ((x) & 0x3ffff)
118 #define VDCTRL3_MUX_SYNC_SIGNALS (1 << 29)
119 #define VDCTRL3_VSYNC_ONLY (1 << 28)
120 #define SET_HOR_WAIT_CNT(x) (((x) & 0xfff) << 16)
121 #define GET_HOR_WAIT_CNT(x) (((x) >> 16) & 0xfff)
122 #define SET_VERT_WAIT_CNT(x) ((x) & 0xffff)
123 #define GET_VERT_WAIT_CNT(x) ((x) & 0xffff)
125 #define VDCTRL4_SET_DOTCLK_DLY(x) (((x) & 0x7) << 29) /* v4 only */
126 #define VDCTRL4_GET_DOTCLK_DLY(x) (((x) >> 29) & 0x7) /* v4 only */
127 #define VDCTRL4_SYNC_SIGNALS_ON (1 << 18)
128 #define SET_DOTCLK_H_VALID_DATA_CNT(x) ((x) & 0x3ffff)
130 #define DEBUG0_HSYNC (1 < 26)
131 #define DEBUG0_VSYNC (1 < 25)
133 #define MIN_XRES 120
134 #define MIN_YRES 120
136 #define RED 0
137 #define GREEN 1
138 #define BLUE 2
139 #define TRANSP 3
141 enum mxsfb_devtype {
142 MXSFB_V3,
143 MXSFB_V4,
146 /* CPU dependent register offsets */
147 struct mxsfb_devdata {
148 unsigned transfer_count;
149 unsigned cur_buf;
150 unsigned next_buf;
151 unsigned debug0;
152 unsigned hs_wdth_mask;
153 unsigned hs_wdth_shift;
154 unsigned ipversion;
157 struct mxsfb_info {
158 struct fb_info fb_info;
159 struct platform_device *pdev;
160 struct clk *clk;
161 void __iomem *base; /* registers */
162 unsigned allocated_size;
163 int enabled;
164 unsigned ld_intf_width;
165 unsigned dotclk_delay;
166 const struct mxsfb_devdata *devdata;
167 int mapped;
170 #define mxsfb_is_v3(host) (host->devdata->ipversion == 3)
171 #define mxsfb_is_v4(host) (host->devdata->ipversion == 4)
173 static const struct mxsfb_devdata mxsfb_devdata[] = {
174 [MXSFB_V3] = {
175 .transfer_count = LCDC_V3_TRANSFER_COUNT,
176 .cur_buf = LCDC_V3_CUR_BUF,
177 .next_buf = LCDC_V3_NEXT_BUF,
178 .debug0 = LCDC_V3_DEBUG0,
179 .hs_wdth_mask = 0xff,
180 .hs_wdth_shift = 24,
181 .ipversion = 3,
183 [MXSFB_V4] = {
184 .transfer_count = LCDC_V4_TRANSFER_COUNT,
185 .cur_buf = LCDC_V4_CUR_BUF,
186 .next_buf = LCDC_V4_NEXT_BUF,
187 .debug0 = LCDC_V4_DEBUG0,
188 .hs_wdth_mask = 0x3fff,
189 .hs_wdth_shift = 18,
190 .ipversion = 4,
194 #define to_imxfb_host(x) (container_of(x, struct mxsfb_info, fb_info))
196 /* mask and shift depends on architecture */
197 static inline u32 set_hsync_pulse_width(struct mxsfb_info *host, unsigned val)
199 return (val & host->devdata->hs_wdth_mask) <<
200 host->devdata->hs_wdth_shift;
203 static inline u32 get_hsync_pulse_width(struct mxsfb_info *host, unsigned val)
205 return (val >> host->devdata->hs_wdth_shift) &
206 host->devdata->hs_wdth_mask;
209 static const struct fb_bitfield def_rgb565[] = {
210 [RED] = {
211 .offset = 11,
212 .length = 5,
214 [GREEN] = {
215 .offset = 5,
216 .length = 6,
218 [BLUE] = {
219 .offset = 0,
220 .length = 5,
222 [TRANSP] = { /* no support for transparency */
223 .length = 0,
227 static const struct fb_bitfield def_rgb666[] = {
228 [RED] = {
229 .offset = 16,
230 .length = 6,
232 [GREEN] = {
233 .offset = 8,
234 .length = 6,
236 [BLUE] = {
237 .offset = 0,
238 .length = 6,
240 [TRANSP] = { /* no support for transparency */
241 .length = 0,
245 static const struct fb_bitfield def_rgb888[] = {
246 [RED] = {
247 .offset = 16,
248 .length = 8,
250 [GREEN] = {
251 .offset = 8,
252 .length = 8,
254 [BLUE] = {
255 .offset = 0,
256 .length = 8,
258 [TRANSP] = { /* no support for transparency */
259 .length = 0,
263 static inline unsigned chan_to_field(unsigned chan, struct fb_bitfield *bf)
265 chan &= 0xffff;
266 chan >>= 16 - bf->length;
267 return chan << bf->offset;
270 static int mxsfb_check_var(struct fb_var_screeninfo *var,
271 struct fb_info *fb_info)
273 struct mxsfb_info *host = to_imxfb_host(fb_info);
274 const struct fb_bitfield *rgb = NULL;
276 if (var->xres < MIN_XRES)
277 var->xres = MIN_XRES;
278 if (var->yres < MIN_YRES)
279 var->yres = MIN_YRES;
281 var->xres_virtual = var->xres;
283 var->yres_virtual = var->yres;
285 switch (var->bits_per_pixel) {
286 case 16:
287 /* always expect RGB 565 */
288 rgb = def_rgb565;
289 break;
290 case 32:
291 switch (host->ld_intf_width) {
292 case STMLCDIF_8BIT:
293 pr_debug("Unsupported LCD bus width mapping\n");
294 break;
295 case STMLCDIF_16BIT:
296 case STMLCDIF_18BIT:
297 /* 24 bit to 18 bit mapping */
298 rgb = def_rgb666;
299 break;
300 case STMLCDIF_24BIT:
301 /* real 24 bit */
302 rgb = def_rgb888;
303 break;
305 break;
306 default:
307 pr_debug("Unsupported colour depth: %u\n", var->bits_per_pixel);
308 return -EINVAL;
312 * Copy the RGB parameters for this display
313 * from the machine specific parameters.
315 var->red = rgb[RED];
316 var->green = rgb[GREEN];
317 var->blue = rgb[BLUE];
318 var->transp = rgb[TRANSP];
320 return 0;
323 static void mxsfb_enable_controller(struct fb_info *fb_info)
325 struct mxsfb_info *host = to_imxfb_host(fb_info);
326 u32 reg;
328 dev_dbg(&host->pdev->dev, "%s\n", __func__);
330 clk_enable(host->clk);
331 clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U);
333 /* if it was disabled, re-enable the mode again */
334 writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_SET);
336 /* enable the SYNC signals first, then the DMA engine */
337 reg = readl(host->base + LCDC_VDCTRL4);
338 reg |= VDCTRL4_SYNC_SIGNALS_ON;
339 writel(reg, host->base + LCDC_VDCTRL4);
341 writel(CTRL_RUN, host->base + LCDC_CTRL + REG_SET);
343 host->enabled = 1;
346 static void mxsfb_disable_controller(struct fb_info *fb_info)
348 struct mxsfb_info *host = to_imxfb_host(fb_info);
349 unsigned loop;
350 u32 reg;
352 dev_dbg(&host->pdev->dev, "%s\n", __func__);
355 * Even if we disable the controller here, it will still continue
356 * until its FIFOs are running out of data
358 writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_CLR);
360 loop = 1000;
361 while (loop) {
362 reg = readl(host->base + LCDC_CTRL);
363 if (!(reg & CTRL_RUN))
364 break;
365 loop--;
368 writel(VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4 + REG_CLR);
370 clk_disable(host->clk);
372 host->enabled = 0;
375 static int mxsfb_set_par(struct fb_info *fb_info)
377 struct mxsfb_info *host = to_imxfb_host(fb_info);
378 u32 ctrl, vdctrl0, vdctrl4;
379 int line_size, fb_size;
380 int reenable = 0;
382 line_size = fb_info->var.xres * (fb_info->var.bits_per_pixel >> 3);
383 fb_size = fb_info->var.yres_virtual * line_size;
385 if (fb_size > fb_info->fix.smem_len)
386 return -ENOMEM;
388 fb_info->fix.line_length = line_size;
391 * It seems, you can't re-program the controller if it is still running.
392 * This may lead into shifted pictures (FIFO issue?).
393 * So, first stop the controller and drain its FIFOs
395 if (host->enabled) {
396 reenable = 1;
397 mxsfb_disable_controller(fb_info);
400 /* clear the FIFOs */
401 writel(CTRL1_FIFO_CLEAR, host->base + LCDC_CTRL1 + REG_SET);
403 ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER |
404 CTRL_SET_BUS_WIDTH(host->ld_intf_width);
406 switch (fb_info->var.bits_per_pixel) {
407 case 16:
408 dev_dbg(&host->pdev->dev, "Setting up RGB565 mode\n");
409 ctrl |= CTRL_SET_WORD_LENGTH(0);
410 writel(CTRL1_SET_BYTE_PACKAGING(0xf), host->base + LCDC_CTRL1);
411 break;
412 case 32:
413 dev_dbg(&host->pdev->dev, "Setting up RGB888/666 mode\n");
414 ctrl |= CTRL_SET_WORD_LENGTH(3);
415 switch (host->ld_intf_width) {
416 case STMLCDIF_8BIT:
417 dev_dbg(&host->pdev->dev,
418 "Unsupported LCD bus width mapping\n");
419 return -EINVAL;
420 case STMLCDIF_16BIT:
421 case STMLCDIF_18BIT:
422 /* 24 bit to 18 bit mapping */
423 ctrl |= CTRL_DF24; /* ignore the upper 2 bits in
424 * each colour component
426 break;
427 case STMLCDIF_24BIT:
428 /* real 24 bit */
429 break;
431 /* do not use packed pixels = one pixel per word instead */
432 writel(CTRL1_SET_BYTE_PACKAGING(0x7), host->base + LCDC_CTRL1);
433 break;
434 default:
435 dev_dbg(&host->pdev->dev, "Unhandled color depth of %u\n",
436 fb_info->var.bits_per_pixel);
437 return -EINVAL;
440 writel(ctrl, host->base + LCDC_CTRL);
442 writel(TRANSFER_COUNT_SET_VCOUNT(fb_info->var.yres) |
443 TRANSFER_COUNT_SET_HCOUNT(fb_info->var.xres),
444 host->base + host->devdata->transfer_count);
446 vdctrl0 = VDCTRL0_ENABLE_PRESENT | /* always in DOTCLOCK mode */
447 VDCTRL0_VSYNC_PERIOD_UNIT |
448 VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
449 VDCTRL0_SET_VSYNC_PULSE_WIDTH(fb_info->var.vsync_len);
450 if (fb_info->var.sync & FB_SYNC_HOR_HIGH_ACT)
451 vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH;
452 if (fb_info->var.sync & FB_SYNC_VERT_HIGH_ACT)
453 vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
454 if (fb_info->var.sync & FB_SYNC_DATA_ENABLE_HIGH_ACT)
455 vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
456 if (fb_info->var.sync & FB_SYNC_DOTCLK_FAILING_ACT)
457 vdctrl0 |= VDCTRL0_DOTCLK_ACT_FAILING;
459 writel(vdctrl0, host->base + LCDC_VDCTRL0);
461 /* frame length in lines */
462 writel(fb_info->var.upper_margin + fb_info->var.vsync_len +
463 fb_info->var.lower_margin + fb_info->var.yres,
464 host->base + LCDC_VDCTRL1);
466 /* line length in units of clocks or pixels */
467 writel(set_hsync_pulse_width(host, fb_info->var.hsync_len) |
468 VDCTRL2_SET_HSYNC_PERIOD(fb_info->var.left_margin +
469 fb_info->var.hsync_len + fb_info->var.right_margin +
470 fb_info->var.xres),
471 host->base + LCDC_VDCTRL2);
473 writel(SET_HOR_WAIT_CNT(fb_info->var.left_margin +
474 fb_info->var.hsync_len) |
475 SET_VERT_WAIT_CNT(fb_info->var.upper_margin +
476 fb_info->var.vsync_len),
477 host->base + LCDC_VDCTRL3);
479 vdctrl4 = SET_DOTCLK_H_VALID_DATA_CNT(fb_info->var.xres);
480 if (mxsfb_is_v4(host))
481 vdctrl4 |= VDCTRL4_SET_DOTCLK_DLY(host->dotclk_delay);
482 writel(vdctrl4, host->base + LCDC_VDCTRL4);
484 writel(fb_info->fix.smem_start +
485 fb_info->fix.line_length * fb_info->var.yoffset,
486 host->base + host->devdata->next_buf);
488 if (reenable)
489 mxsfb_enable_controller(fb_info);
491 return 0;
494 static int mxsfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
495 u_int transp, struct fb_info *fb_info)
497 unsigned int val;
498 int ret = -EINVAL;
501 * If greyscale is true, then we convert the RGB value
502 * to greyscale no matter what visual we are using.
504 if (fb_info->var.grayscale)
505 red = green = blue = (19595 * red + 38470 * green +
506 7471 * blue) >> 16;
508 switch (fb_info->fix.visual) {
509 case FB_VISUAL_TRUECOLOR:
511 * 12 or 16-bit True Colour. We encode the RGB value
512 * according to the RGB bitfield information.
514 if (regno < 16) {
515 u32 *pal = fb_info->pseudo_palette;
517 val = chan_to_field(red, &fb_info->var.red);
518 val |= chan_to_field(green, &fb_info->var.green);
519 val |= chan_to_field(blue, &fb_info->var.blue);
521 pal[regno] = val;
522 ret = 0;
524 break;
526 case FB_VISUAL_STATIC_PSEUDOCOLOR:
527 case FB_VISUAL_PSEUDOCOLOR:
528 break;
531 return ret;
534 static int mxsfb_blank(int blank, struct fb_info *fb_info)
536 struct mxsfb_info *host = to_imxfb_host(fb_info);
538 switch (blank) {
539 case FB_BLANK_POWERDOWN:
540 case FB_BLANK_VSYNC_SUSPEND:
541 case FB_BLANK_HSYNC_SUSPEND:
542 case FB_BLANK_NORMAL:
543 if (host->enabled)
544 mxsfb_disable_controller(fb_info);
545 break;
547 case FB_BLANK_UNBLANK:
548 if (!host->enabled)
549 mxsfb_enable_controller(fb_info);
550 break;
552 return 0;
555 static int mxsfb_pan_display(struct fb_var_screeninfo *var,
556 struct fb_info *fb_info)
558 struct mxsfb_info *host = to_imxfb_host(fb_info);
559 unsigned offset;
561 if (var->xoffset != 0)
562 return -EINVAL;
564 offset = fb_info->fix.line_length * var->yoffset;
566 /* update on next VSYNC */
567 writel(fb_info->fix.smem_start + offset,
568 host->base + host->devdata->next_buf);
570 return 0;
573 static struct fb_ops mxsfb_ops = {
574 .owner = THIS_MODULE,
575 .fb_check_var = mxsfb_check_var,
576 .fb_set_par = mxsfb_set_par,
577 .fb_setcolreg = mxsfb_setcolreg,
578 .fb_blank = mxsfb_blank,
579 .fb_pan_display = mxsfb_pan_display,
580 .fb_fillrect = cfb_fillrect,
581 .fb_copyarea = cfb_copyarea,
582 .fb_imageblit = cfb_imageblit,
585 static int __devinit mxsfb_restore_mode(struct mxsfb_info *host)
587 struct fb_info *fb_info = &host->fb_info;
588 unsigned line_count;
589 unsigned period;
590 unsigned long pa, fbsize;
591 int bits_per_pixel, ofs;
592 u32 transfer_count, vdctrl0, vdctrl2, vdctrl3, vdctrl4, ctrl;
593 struct fb_videomode vmode;
595 /* Only restore the mode when the controller is running */
596 ctrl = readl(host->base + LCDC_CTRL);
597 if (!(ctrl & CTRL_RUN))
598 return -EINVAL;
600 vdctrl0 = readl(host->base + LCDC_VDCTRL0);
601 vdctrl2 = readl(host->base + LCDC_VDCTRL2);
602 vdctrl3 = readl(host->base + LCDC_VDCTRL3);
603 vdctrl4 = readl(host->base + LCDC_VDCTRL4);
605 transfer_count = readl(host->base + host->devdata->transfer_count);
607 vmode.xres = TRANSFER_COUNT_GET_HCOUNT(transfer_count);
608 vmode.yres = TRANSFER_COUNT_GET_VCOUNT(transfer_count);
610 switch (CTRL_GET_WORD_LENGTH(ctrl)) {
611 case 0:
612 bits_per_pixel = 16;
613 break;
614 case 3:
615 bits_per_pixel = 32;
616 case 1:
617 default:
618 return -EINVAL;
621 fb_info->var.bits_per_pixel = bits_per_pixel;
623 vmode.pixclock = KHZ2PICOS(clk_get_rate(host->clk) / 1000U);
624 vmode.hsync_len = get_hsync_pulse_width(host, vdctrl2);
625 vmode.left_margin = GET_HOR_WAIT_CNT(vdctrl3) - vmode.hsync_len;
626 vmode.right_margin = VDCTRL2_GET_HSYNC_PERIOD(vdctrl2) - vmode.hsync_len -
627 vmode.left_margin - vmode.xres;
628 vmode.vsync_len = VDCTRL0_GET_VSYNC_PULSE_WIDTH(vdctrl0);
629 period = readl(host->base + LCDC_VDCTRL1);
630 vmode.upper_margin = GET_VERT_WAIT_CNT(vdctrl3) - vmode.vsync_len;
631 vmode.lower_margin = period - vmode.vsync_len - vmode.upper_margin - vmode.yres;
633 vmode.vmode = FB_VMODE_NONINTERLACED;
635 vmode.sync = 0;
636 if (vdctrl0 & VDCTRL0_HSYNC_ACT_HIGH)
637 vmode.sync |= FB_SYNC_HOR_HIGH_ACT;
638 if (vdctrl0 & VDCTRL0_VSYNC_ACT_HIGH)
639 vmode.sync |= FB_SYNC_VERT_HIGH_ACT;
641 pr_debug("Reconstructed video mode:\n");
642 pr_debug("%dx%d, hsync: %u left: %u, right: %u, vsync: %u, upper: %u, lower: %u\n",
643 vmode.xres, vmode.yres,
644 vmode.hsync_len, vmode.left_margin, vmode.right_margin,
645 vmode.vsync_len, vmode.upper_margin, vmode.lower_margin);
646 pr_debug("pixclk: %ldkHz\n", PICOS2KHZ(vmode.pixclock));
648 fb_add_videomode(&vmode, &fb_info->modelist);
650 host->ld_intf_width = CTRL_GET_BUS_WIDTH(ctrl);
651 host->dotclk_delay = VDCTRL4_GET_DOTCLK_DLY(vdctrl4);
653 fb_info->fix.line_length = vmode.xres * (bits_per_pixel >> 3);
655 pa = readl(host->base + host->devdata->cur_buf);
656 fbsize = fb_info->fix.line_length * vmode.yres;
657 if (pa < fb_info->fix.smem_start)
658 return -EINVAL;
659 if (pa + fbsize > fb_info->fix.smem_start + fb_info->fix.smem_len)
660 return -EINVAL;
661 ofs = pa - fb_info->fix.smem_start;
662 if (ofs) {
663 memmove(fb_info->screen_base, fb_info->screen_base + ofs, fbsize);
664 writel(fb_info->fix.smem_start, host->base + host->devdata->next_buf);
667 line_count = fb_info->fix.smem_len / fb_info->fix.line_length;
668 fb_info->fix.ypanstep = 1;
670 clk_enable(host->clk);
671 host->enabled = 1;
673 return 0;
676 static int __devinit mxsfb_init_fbinfo(struct mxsfb_info *host)
678 struct fb_info *fb_info = &host->fb_info;
679 struct fb_var_screeninfo *var = &fb_info->var;
680 struct mxsfb_platform_data *pdata = host->pdev->dev.platform_data;
681 dma_addr_t fb_phys;
682 void *fb_virt;
683 unsigned fb_size = pdata->fb_size;
685 fb_info->fbops = &mxsfb_ops;
686 fb_info->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST;
687 strlcpy(fb_info->fix.id, "mxs", sizeof(fb_info->fix.id));
688 fb_info->fix.type = FB_TYPE_PACKED_PIXELS;
689 fb_info->fix.ypanstep = 1;
690 fb_info->fix.visual = FB_VISUAL_TRUECOLOR,
691 fb_info->fix.accel = FB_ACCEL_NONE;
693 var->bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16;
694 var->nonstd = 0;
695 var->activate = FB_ACTIVATE_NOW;
696 var->accel_flags = 0;
697 var->vmode = FB_VMODE_NONINTERLACED;
699 host->dotclk_delay = pdata->dotclk_delay;
700 host->ld_intf_width = pdata->ld_intf_width;
702 /* Memory allocation for framebuffer */
703 if (pdata->fb_phys) {
704 if (!fb_size)
705 return -EINVAL;
707 fb_phys = pdata->fb_phys;
709 if (!request_mem_region(fb_phys, fb_size, host->pdev->name))
710 return -ENOMEM;
712 fb_virt = ioremap(fb_phys, fb_size);
713 if (!fb_virt) {
714 release_mem_region(fb_phys, fb_size);
715 return -ENOMEM;
717 host->mapped = 1;
718 } else {
719 if (!fb_size)
720 fb_size = SZ_2M; /* default */
721 fb_virt = alloc_pages_exact(fb_size, GFP_DMA);
722 if (!fb_virt)
723 return -ENOMEM;
725 fb_phys = virt_to_phys(fb_virt);
728 fb_info->fix.smem_start = fb_phys;
729 fb_info->screen_base = fb_virt;
730 fb_info->screen_size = fb_info->fix.smem_len = fb_size;
732 if (mxsfb_restore_mode(host))
733 memset(fb_virt, 0, fb_size);
735 return 0;
738 static void __devexit mxsfb_free_videomem(struct mxsfb_info *host)
740 struct fb_info *fb_info = &host->fb_info;
742 if (host->mapped) {
743 iounmap(fb_info->screen_base);
744 release_mem_region(fb_info->fix.smem_start,
745 fb_info->screen_size);
746 } else {
747 free_pages_exact(fb_info->screen_base, fb_info->fix.smem_len);
751 static int __devinit mxsfb_probe(struct platform_device *pdev)
753 struct mxsfb_platform_data *pdata = pdev->dev.platform_data;
754 struct resource *res;
755 struct mxsfb_info *host;
756 struct fb_info *fb_info;
757 struct fb_modelist *modelist;
758 int i, ret;
760 if (!pdata) {
761 dev_err(&pdev->dev, "No platformdata. Giving up\n");
762 return -ENODEV;
765 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
766 if (!res) {
767 dev_err(&pdev->dev, "Cannot get memory IO resource\n");
768 return -ENODEV;
771 if (!request_mem_region(res->start, resource_size(res), pdev->name))
772 return -EBUSY;
774 fb_info = framebuffer_alloc(sizeof(struct mxsfb_info), &pdev->dev);
775 if (!fb_info) {
776 dev_err(&pdev->dev, "Failed to allocate fbdev\n");
777 ret = -ENOMEM;
778 goto error_alloc_info;
781 host = to_imxfb_host(fb_info);
783 host->base = ioremap(res->start, resource_size(res));
784 if (!host->base) {
785 dev_err(&pdev->dev, "ioremap failed\n");
786 ret = -ENOMEM;
787 goto error_ioremap;
790 host->pdev = pdev;
791 platform_set_drvdata(pdev, host);
793 host->devdata = &mxsfb_devdata[pdev->id_entry->driver_data];
795 host->clk = clk_get(&host->pdev->dev, NULL);
796 if (IS_ERR(host->clk)) {
797 ret = PTR_ERR(host->clk);
798 goto error_getclock;
801 fb_info->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
802 if (!fb_info->pseudo_palette) {
803 ret = -ENOMEM;
804 goto error_pseudo_pallette;
807 INIT_LIST_HEAD(&fb_info->modelist);
809 ret = mxsfb_init_fbinfo(host);
810 if (ret != 0)
811 goto error_init_fb;
813 for (i = 0; i < pdata->mode_count; i++)
814 fb_add_videomode(&pdata->mode_list[i], &fb_info->modelist);
816 modelist = list_first_entry(&fb_info->modelist,
817 struct fb_modelist, list);
818 fb_videomode_to_var(&fb_info->var, &modelist->mode);
820 /* init the color fields */
821 mxsfb_check_var(&fb_info->var, fb_info);
823 platform_set_drvdata(pdev, fb_info);
825 ret = register_framebuffer(fb_info);
826 if (ret != 0) {
827 dev_err(&pdev->dev,"Failed to register framebuffer\n");
828 goto error_register;
831 if (!host->enabled) {
832 writel(0, host->base + LCDC_CTRL);
833 mxsfb_set_par(fb_info);
834 mxsfb_enable_controller(fb_info);
837 dev_info(&pdev->dev, "initialized\n");
839 return 0;
841 error_register:
842 if (host->enabled)
843 clk_disable(host->clk);
844 fb_destroy_modelist(&fb_info->modelist);
845 error_init_fb:
846 kfree(fb_info->pseudo_palette);
847 error_pseudo_pallette:
848 clk_put(host->clk);
849 error_getclock:
850 iounmap(host->base);
851 error_ioremap:
852 framebuffer_release(fb_info);
853 error_alloc_info:
854 release_mem_region(res->start, resource_size(res));
856 return ret;
859 static int __devexit mxsfb_remove(struct platform_device *pdev)
861 struct fb_info *fb_info = platform_get_drvdata(pdev);
862 struct mxsfb_info *host = to_imxfb_host(fb_info);
863 struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
865 if (host->enabled)
866 mxsfb_disable_controller(fb_info);
868 unregister_framebuffer(fb_info);
869 kfree(fb_info->pseudo_palette);
870 mxsfb_free_videomem(host);
871 iounmap(host->base);
872 clk_put(host->clk);
874 framebuffer_release(fb_info);
875 release_mem_region(res->start, resource_size(res));
877 platform_set_drvdata(pdev, NULL);
879 return 0;
882 static struct platform_device_id mxsfb_devtype[] = {
884 .name = "imx23-fb",
885 .driver_data = MXSFB_V3,
886 }, {
887 .name = "imx28-fb",
888 .driver_data = MXSFB_V4,
889 }, {
890 /* sentinel */
893 MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
895 static struct platform_driver mxsfb_driver = {
896 .probe = mxsfb_probe,
897 .remove = __devexit_p(mxsfb_remove),
898 .id_table = mxsfb_devtype,
899 .driver = {
900 .name = DRIVER_NAME,
904 static int __init mxsfb_init(void)
906 return platform_driver_register(&mxsfb_driver);
909 static void __exit mxsfb_exit(void)
911 platform_driver_unregister(&mxsfb_driver);
914 module_init(mxsfb_init);
915 module_exit(mxsfb_exit);
917 MODULE_DESCRIPTION("Freescale mxs framebuffer driver");
918 MODULE_AUTHOR("Sascha Hauer, Pengutronix");
919 MODULE_LICENSE("GPL");