?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
staging: rtl8192e: Cleanup checkpatch -f warnings and errors - Part XVII
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / tty / synclink_gt.c
blob18b48cd3b41ddbbb7a76f1c8898b907fac1b09ca
1 /*
2 * Device driver for Microgate SyncLink GT serial adapters.
3 *
4 * written by Paul Fulghum for Microgate Corporation
5 * paulkf@microgate.com
6 *
7 * Microgate and SyncLink are trademarks of Microgate Corporation
8 *
9 * This code is released under the GNU General Public License (GPL)
10 *
11 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
12 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
13 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
14 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
15 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
16 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
17 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
18 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
19 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
20 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
21 * OF THE POSSIBILITY OF SUCH DAMAGE.
22 */
23
24 /*
25 * DEBUG OUTPUT DEFINITIONS
26 *
27 * uncomment lines below to enable specific types of debug output
28 *
29 * DBGINFO information - most verbose output
30 * DBGERR serious errors
31 * DBGBH bottom half service routine debugging
32 * DBGISR interrupt service routine debugging
33 * DBGDATA output receive and transmit data
34 * DBGTBUF output transmit DMA buffers and registers
35 * DBGRBUF output receive DMA buffers and registers
36 */
37
38 #define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt
39 #define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt
40 #define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt
41 #define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt
42 #define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label))
43 /*#define DBGTBUF(info) dump_tbufs(info)*/
44 /*#define DBGRBUF(info) dump_rbufs(info)*/
45
46
47 #include <linux/module.h>
48 #include <linux/errno.h>
49 #include <linux/signal.h>
50 #include <linux/sched.h>
51 #include <linux/timer.h>
52 #include <linux/interrupt.h>
53 #include <linux/pci.h>
54 #include <linux/tty.h>
55 #include <linux/tty_flip.h>
56 #include <linux/serial.h>
57 #include <linux/major.h>
58 #include <linux/string.h>
59 #include <linux/fcntl.h>
60 #include <linux/ptrace.h>
61 #include <linux/ioport.h>
62 #include <linux/mm.h>
63 #include <linux/seq_file.h>
64 #include <linux/slab.h>
65 #include <linux/netdevice.h>
66 #include <linux/vmalloc.h>
67 #include <linux/init.h>
68 #include <linux/delay.h>
69 #include <linux/ioctl.h>
70 #include <linux/termios.h>
71 #include <linux/bitops.h>
72 #include <linux/workqueue.h>
73 #include <linux/hdlc.h>
74 #include <linux/synclink.h>
75
76 #include <asm/system.h>
77 #include <asm/io.h>
78 #include <asm/irq.h>
79 #include <asm/dma.h>
80 #include <asm/types.h>
81 #include <asm/uaccess.h>
82
83 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_GT_MODULE))
84 #define SYNCLINK_GENERIC_HDLC 1
85 #else
86 #define SYNCLINK_GENERIC_HDLC 0
87 #endif
88
89 /*
90 * module identification
91 */
92 static char *driver_name = "SyncLink GT";
93 static char *tty_driver_name = "synclink_gt";
94 static char *tty_dev_prefix = "ttySLG";
95 MODULE_LICENSE("GPL");
96 #define MGSL_MAGIC 0x5401
97 #define MAX_DEVICES 32
98
99 static struct pci_device_id pci_table[] = {
100 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
101 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
102 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
103 {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
104 {0,}, /* terminate list */
105 };
106 MODULE_DEVICE_TABLE(pci, pci_table);
107
108 static int init_one(struct pci_dev *dev,const struct pci_device_id *ent);
109 static void remove_one(struct pci_dev *dev);
110 static struct pci_driver pci_driver = {
111 .name = "synclink_gt",
112 .id_table = pci_table,
113 .probe = init_one,
114 .remove = __devexit_p(remove_one),
115 };
116
117 static bool pci_registered;
118
119 /*
120 * module configuration and status
121 */
122 static struct slgt_info *slgt_device_list;
123 static int slgt_device_count;
124
125 static int ttymajor;
126 static int debug_level;
127 static int maxframe[MAX_DEVICES];
128
129 module_param(ttymajor, int, 0);
130 module_param(debug_level, int, 0);
131 module_param_array(maxframe, int, NULL, 0);
132
133 MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned");
134 MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail");
135 MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)");
136
137 /*
138 * tty support and callbacks
139 */
140 static struct tty_driver *serial_driver;
141
142 static int open(struct tty_struct *tty, struct file * filp);
143 static void close(struct tty_struct *tty, struct file * filp);
144 static void hangup(struct tty_struct *tty);
145 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
146
147 static int write(struct tty_struct *tty, const unsigned char *buf, int count);
148 static int put_char(struct tty_struct *tty, unsigned char ch);
149 static void send_xchar(struct tty_struct *tty, char ch);
150 static void wait_until_sent(struct tty_struct *tty, int timeout);
151 static int write_room(struct tty_struct *tty);
152 static void flush_chars(struct tty_struct *tty);
153 static void flush_buffer(struct tty_struct *tty);
154 static void tx_hold(struct tty_struct *tty);
155 static void tx_release(struct tty_struct *tty);
156
157 static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
158 static int chars_in_buffer(struct tty_struct *tty);
159 static void throttle(struct tty_struct * tty);
160 static void unthrottle(struct tty_struct * tty);
161 static int set_break(struct tty_struct *tty, int break_state);
162
163 /*
164 * generic HDLC support and callbacks
165 */
166 #if SYNCLINK_GENERIC_HDLC
167 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
168 static void hdlcdev_tx_done(struct slgt_info *info);
169 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size);
170 static int hdlcdev_init(struct slgt_info *info);
171 static void hdlcdev_exit(struct slgt_info *info);
172 #endif
173
174
175 /*
176 * device specific structures, macros and functions
177 */
178
179 #define SLGT_MAX_PORTS 4
180 #define SLGT_REG_SIZE 256
181
182 /*
183 * conditional wait facility
184 */
185 struct cond_wait {
186 struct cond_wait *next;
187 wait_queue_head_t q;
188 wait_queue_t wait;
189 unsigned int data;
190 };
191 static void init_cond_wait(struct cond_wait *w, unsigned int data);
192 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w);
193 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *w);
194 static void flush_cond_wait(struct cond_wait **head);
195
196 /*
197 * DMA buffer descriptor and access macros
198 */
199 struct slgt_desc
200 {
201 __le16 count;
202 __le16 status;
203 __le32 pbuf; /* physical address of data buffer */
204 __le32 next; /* physical address of next descriptor */
205
206 /* driver book keeping */
207 char *buf; /* virtual address of data buffer */
208 unsigned int pdesc; /* physical address of this descriptor */
209 dma_addr_t buf_dma_addr;
210 unsigned short buf_count;
211 };
212
213 #define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b))
214 #define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b))
215 #define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b))
216 #define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
217 #define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b))
218 #define desc_count(a) (le16_to_cpu((a).count))
219 #define desc_status(a) (le16_to_cpu((a).status))
220 #define desc_complete(a) (le16_to_cpu((a).status) & BIT15)
221 #define desc_eof(a) (le16_to_cpu((a).status) & BIT2)
222 #define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1)
223 #define desc_abort(a) (le16_to_cpu((a).status) & BIT0)
224 #define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3)
225
226 struct _input_signal_events {
227 int ri_up;
228 int ri_down;
229 int dsr_up;
230 int dsr_down;
231 int dcd_up;
232 int dcd_down;
233 int cts_up;
234 int cts_down;
235 };
236
237 /*
238 * device instance data structure
239 */
240 struct slgt_info {
241 void *if_ptr; /* General purpose pointer (used by SPPP) */
242 struct tty_port port;
243
244 struct slgt_info *next_device; /* device list link */
245
246 int magic;
247
248 char device_name[25];
249 struct pci_dev *pdev;
250
251 int port_count; /* count of ports on adapter */
252 int adapter_num; /* adapter instance number */
253 int port_num; /* port instance number */
254
255 /* array of pointers to port contexts on this adapter */
256 struct slgt_info *port_array[SLGT_MAX_PORTS];
257
258 int line; /* tty line instance number */
259
260 struct mgsl_icount icount;
261
262 int timeout;
263 int x_char; /* xon/xoff character */
264 unsigned int read_status_mask;
265 unsigned int ignore_status_mask;
266
267 wait_queue_head_t status_event_wait_q;
268 wait_queue_head_t event_wait_q;
269 struct timer_list tx_timer;
270 struct timer_list rx_timer;
271
272 unsigned int gpio_present;
273 struct cond_wait *gpio_wait_q;
274
275 spinlock_t lock; /* spinlock for synchronizing with ISR */
276
277 struct work_struct task;
278 u32 pending_bh;
279 bool bh_requested;
280 bool bh_running;
281
282 int isr_overflow;
283 bool irq_requested; /* true if IRQ requested */
284 bool irq_occurred; /* for diagnostics use */
285
286 /* device configuration */
287
288 unsigned int bus_type;
289 unsigned int irq_level;
290 unsigned long irq_flags;
291
292 unsigned char __iomem * reg_addr; /* memory mapped registers address */
293 u32 phys_reg_addr;
294 bool reg_addr_requested;
295
296 MGSL_PARAMS params; /* communications parameters */
297 u32 idle_mode;
298 u32 max_frame_size; /* as set by device config */
299
300 unsigned int rbuf_fill_level;
301 unsigned int rx_pio;
302 unsigned int if_mode;
303 unsigned int base_clock;
304 unsigned int xsync;
305 unsigned int xctrl;
306
307 /* device status */
308
309 bool rx_enabled;
310 bool rx_restart;
311
312 bool tx_enabled;
313 bool tx_active;
314
315 unsigned char signals; /* serial signal states */
316 int init_error; /* initialization error */
317
318 unsigned char *tx_buf;
319 int tx_count;
320
321 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
322 char char_buf[MAX_ASYNC_BUFFER_SIZE];
323 bool drop_rts_on_tx_done;
324 struct _input_signal_events input_signal_events;
325
326 int dcd_chkcount; /* check counts to prevent */
327 int cts_chkcount; /* too many IRQs if a signal */
328 int dsr_chkcount; /* is floating */
329 int ri_chkcount;
330
331 char *bufs; /* virtual address of DMA buffer lists */
332 dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */
333
334 unsigned int rbuf_count;
335 struct slgt_desc *rbufs;
336 unsigned int rbuf_current;
337 unsigned int rbuf_index;
338 unsigned int rbuf_fill_index;
339 unsigned short rbuf_fill_count;
340
341 unsigned int tbuf_count;
342 struct slgt_desc *tbufs;
343 unsigned int tbuf_current;
344 unsigned int tbuf_start;
345
346 unsigned char *tmp_rbuf;
347 unsigned int tmp_rbuf_count;
348
349 /* SPPP/Cisco HDLC device parts */
350
351 int netcount;
352 spinlock_t netlock;
353 #if SYNCLINK_GENERIC_HDLC
354 struct net_device *netdev;
355 #endif
356
357 };
358
359 static MGSL_PARAMS default_params = {
360 .mode = MGSL_MODE_HDLC,
361 .loopback = 0,
362 .flags = HDLC_FLAG_UNDERRUN_ABORT15,
363 .encoding = HDLC_ENCODING_NRZI_SPACE,
364 .clock_speed = 0,
365 .addr_filter = 0xff,
366 .crc_type = HDLC_CRC_16_CCITT,
367 .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS,
368 .preamble = HDLC_PREAMBLE_PATTERN_NONE,
369 .data_rate = 9600,
370 .data_bits = 8,
371 .stop_bits = 1,
372 .parity = ASYNC_PARITY_NONE
373 };
374
375
376 #define BH_RECEIVE 1
377 #define BH_TRANSMIT 2
378 #define BH_STATUS 4
379 #define IO_PIN_SHUTDOWN_LIMIT 100
380
381 #define DMABUFSIZE 256
382 #define DESC_LIST_SIZE 4096
383
384 #define MASK_PARITY BIT1
385 #define MASK_FRAMING BIT0
386 #define MASK_BREAK BIT14
387 #define MASK_OVERRUN BIT4
388
389 #define GSR 0x00 /* global status */
390 #define JCR 0x04 /* JTAG control */
391 #define IODR 0x08 /* GPIO direction */
392 #define IOER 0x0c /* GPIO interrupt enable */
393 #define IOVR 0x10 /* GPIO value */
394 #define IOSR 0x14 /* GPIO interrupt status */
395 #define TDR 0x80 /* tx data */
396 #define RDR 0x80 /* rx data */
397 #define TCR 0x82 /* tx control */
398 #define TIR 0x84 /* tx idle */
399 #define TPR 0x85 /* tx preamble */
400 #define RCR 0x86 /* rx control */
401 #define VCR 0x88 /* V.24 control */
402 #define CCR 0x89 /* clock control */
403 #define BDR 0x8a /* baud divisor */
404 #define SCR 0x8c /* serial control */
405 #define SSR 0x8e /* serial status */
406 #define RDCSR 0x90 /* rx DMA control/status */
407 #define TDCSR 0x94 /* tx DMA control/status */
408 #define RDDAR 0x98 /* rx DMA descriptor address */
409 #define TDDAR 0x9c /* tx DMA descriptor address */
410 #define XSR 0x40 /* extended sync pattern */
411 #define XCR 0x44 /* extended control */
412
413 #define RXIDLE BIT14
414 #define RXBREAK BIT14
415 #define IRQ_TXDATA BIT13
416 #define IRQ_TXIDLE BIT12
417 #define IRQ_TXUNDER BIT11 /* HDLC */
418 #define IRQ_RXDATA BIT10
419 #define IRQ_RXIDLE BIT9 /* HDLC */
420 #define IRQ_RXBREAK BIT9 /* async */
421 #define IRQ_RXOVER BIT8
422 #define IRQ_DSR BIT7
423 #define IRQ_CTS BIT6
424 #define IRQ_DCD BIT5
425 #define IRQ_RI BIT4
426 #define IRQ_ALL 0x3ff0
427 #define IRQ_MASTER BIT0
428
429 #define slgt_irq_on(info, mask) \
430 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask)))
431 #define slgt_irq_off(info, mask) \
432 wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask)))
433
434 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr);
435 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value);
436 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr);
437 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value);
438 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr);
439 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value);
440
441 static void msc_set_vcr(struct slgt_info *info);
442
443 static int startup(struct slgt_info *info);
444 static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info);
445 static void shutdown(struct slgt_info *info);
446 static void program_hw(struct slgt_info *info);
447 static void change_params(struct slgt_info *info);
448
449 static int register_test(struct slgt_info *info);
450 static int irq_test(struct slgt_info *info);
451 static int loopback_test(struct slgt_info *info);
452 static int adapter_test(struct slgt_info *info);
453
454 static void reset_adapter(struct slgt_info *info);
455 static void reset_port(struct slgt_info *info);
456 static void async_mode(struct slgt_info *info);
457 static void sync_mode(struct slgt_info *info);
458
459 static void rx_stop(struct slgt_info *info);
460 static void rx_start(struct slgt_info *info);
461 static void reset_rbufs(struct slgt_info *info);
462 static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last);
463 static void rdma_reset(struct slgt_info *info);
464 static bool rx_get_frame(struct slgt_info *info);
465 static bool rx_get_buf(struct slgt_info *info);
466
467 static void tx_start(struct slgt_info *info);
468 static void tx_stop(struct slgt_info *info);
469 static void tx_set_idle(struct slgt_info *info);
470 static unsigned int free_tbuf_count(struct slgt_info *info);
471 static unsigned int tbuf_bytes(struct slgt_info *info);
472 static void reset_tbufs(struct slgt_info *info);
473 static void tdma_reset(struct slgt_info *info);
474 static bool tx_load(struct slgt_info *info, const char *buf, unsigned int count);
475
476 static void get_signals(struct slgt_info *info);
477 static void set_signals(struct slgt_info *info);
478 static void enable_loopback(struct slgt_info *info);
479 static void set_rate(struct slgt_info *info, u32 data_rate);
480
481 static int bh_action(struct slgt_info *info);
482 static void bh_handler(struct work_struct *work);
483 static void bh_transmit(struct slgt_info *info);
484 static void isr_serial(struct slgt_info *info);
485 static void isr_rdma(struct slgt_info *info);
486 static void isr_txeom(struct slgt_info *info, unsigned short status);
487 static void isr_tdma(struct slgt_info *info);
488
489 static int alloc_dma_bufs(struct slgt_info *info);
490 static void free_dma_bufs(struct slgt_info *info);
491 static int alloc_desc(struct slgt_info *info);
492 static void free_desc(struct slgt_info *info);
493 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
494 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count);
495
496 static int alloc_tmp_rbuf(struct slgt_info *info);
497 static void free_tmp_rbuf(struct slgt_info *info);
498
499 static void tx_timeout(unsigned long context);
500 static void rx_timeout(unsigned long context);
501
502 /*
503 * ioctl handlers
504 */
505 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount);
506 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params);
507 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params);
508 static int get_txidle(struct slgt_info *info, int __user *idle_mode);
509 static int set_txidle(struct slgt_info *info, int idle_mode);
510 static int tx_enable(struct slgt_info *info, int enable);
511 static int tx_abort(struct slgt_info *info);
512 static int rx_enable(struct slgt_info *info, int enable);
513 static int modem_input_wait(struct slgt_info *info,int arg);
514 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr);
515 static int tiocmget(struct tty_struct *tty);
516 static int tiocmset(struct tty_struct *tty,
517 unsigned int set, unsigned int clear);
518 static int set_break(struct tty_struct *tty, int break_state);
519 static int get_interface(struct slgt_info *info, int __user *if_mode);
520 static int set_interface(struct slgt_info *info, int if_mode);
521 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
522 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
523 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *gpio);
524 static int get_xsync(struct slgt_info *info, int __user *if_mode);
525 static int set_xsync(struct slgt_info *info, int if_mode);
526 static int get_xctrl(struct slgt_info *info, int __user *if_mode);
527 static int set_xctrl(struct slgt_info *info, int if_mode);
528
529 /*
530 * driver functions
531 */
532 static void add_device(struct slgt_info *info);
533 static void device_init(int adapter_num, struct pci_dev *pdev);
534 static int claim_resources(struct slgt_info *info);
535 static void release_resources(struct slgt_info *info);
536
537 /*
538 * DEBUG OUTPUT CODE
539 */
540 #ifndef DBGINFO
541 #define DBGINFO(fmt)
542 #endif
543 #ifndef DBGERR
544 #define DBGERR(fmt)
545 #endif
546 #ifndef DBGBH
547 #define DBGBH(fmt)
548 #endif
549 #ifndef DBGISR
550 #define DBGISR(fmt)
551 #endif
552
553 #ifdef DBGDATA
554 static void trace_block(struct slgt_info *info, const char *data, int count, const char *label)
555 {
556 int i;
557 int linecount;
558 printk("%s %s data:\n",info->device_name, label);
559 while(count) {
560 linecount = (count > 16) ? 16 : count;
561 for(i=0; i < linecount; i++)
562 printk("%02X ",(unsigned char)data[i]);
563 for(;i<17;i++)
564 printk(" ");
565 for(i=0;i<linecount;i++) {
566 if (data[i]>=040 && data[i]<=0176)
567 printk("%c",data[i]);
568 else
569 printk(".");
570 }
571 printk("\n");
572 data += linecount;
573 count -= linecount;
574 }
575 }
576 #else
577 #define DBGDATA(info, buf, size, label)
578 #endif
579
580 #ifdef DBGTBUF
581 static void dump_tbufs(struct slgt_info *info)
582 {
583 int i;
584 printk("tbuf_current=%d\n", info->tbuf_current);
585 for (i=0 ; i < info->tbuf_count ; i++) {
586 printk("%d: count=%04X status=%04X\n",
587 i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status));
588 }
589 }
590 #else
591 #define DBGTBUF(info)
592 #endif
593
594 #ifdef DBGRBUF
595 static void dump_rbufs(struct slgt_info *info)
596 {
597 int i;
598 printk("rbuf_current=%d\n", info->rbuf_current);
599 for (i=0 ; i < info->rbuf_count ; i++) {
600 printk("%d: count=%04X status=%04X\n",
601 i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status));
602 }
603 }
604 #else
605 #define DBGRBUF(info)
606 #endif
607
608 static inline int sanity_check(struct slgt_info *info, char *devname, const char *name)
609 {
610 #ifdef SANITY_CHECK
611 if (!info) {
612 printk("null struct slgt_info for (%s) in %s\n", devname, name);
613 return 1;
614 }
615 if (info->magic != MGSL_MAGIC) {
616 printk("bad magic number struct slgt_info (%s) in %s\n", devname, name);
617 return 1;
618 }
619 #else
620 if (!info)
621 return 1;
622 #endif
623 return 0;
624 }
625
626 /**
627 * line discipline callback wrappers
628 *
629 * The wrappers maintain line discipline references
630 * while calling into the line discipline.
631 *
632 * ldisc_receive_buf - pass receive data to line discipline
633 */
634 static void ldisc_receive_buf(struct tty_struct *tty,
635 const __u8 *data, char *flags, int count)
636 {
637 struct tty_ldisc *ld;
638 if (!tty)
639 return;
640 ld = tty_ldisc_ref(tty);
641 if (ld) {
642 if (ld->ops->receive_buf)
643 ld->ops->receive_buf(tty, data, flags, count);
644 tty_ldisc_deref(ld);
645 }
646 }
647
648 /* tty callbacks */
649
650 static int open(struct tty_struct *tty, struct file *filp)
651 {
652 struct slgt_info *info;
653 int retval, line;
654 unsigned long flags;
655
656 line = tty->index;
657 if ((line < 0) || (line >= slgt_device_count)) {
658 DBGERR(("%s: open with invalid line #%d.\n", driver_name, line));
659 return -ENODEV;
660 }
661
662 info = slgt_device_list;
663 while(info && info->line != line)
664 info = info->next_device;
665 if (sanity_check(info, tty->name, "open"))
666 return -ENODEV;
667 if (info->init_error) {
668 DBGERR(("%s init error=%d\n", info->device_name, info->init_error));
669 return -ENODEV;
670 }
671
672 tty->driver_data = info;
673 info->port.tty = tty;
674
675 DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->port.count));
676
677 /* If port is closing, signal caller to try again */
678 if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
679 if (info->port.flags & ASYNC_CLOSING)
680 interruptible_sleep_on(&info->port.close_wait);
681 retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
682 -EAGAIN : -ERESTARTSYS);
683 goto cleanup;
684 }
685
686 mutex_lock(&info->port.mutex);
687 info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
688
689 spin_lock_irqsave(&info->netlock, flags);
690 if (info->netcount) {
691 retval = -EBUSY;
692 spin_unlock_irqrestore(&info->netlock, flags);
693 mutex_unlock(&info->port.mutex);
694 goto cleanup;
695 }
696 info->port.count++;
697 spin_unlock_irqrestore(&info->netlock, flags);
698
699 if (info->port.count == 1) {
700 /* 1st open on this device, init hardware */
701 retval = startup(info);
702 if (retval < 0) {
703 mutex_unlock(&info->port.mutex);
704 goto cleanup;
705 }
706 }
707 mutex_unlock(&info->port.mutex);
708 retval = block_til_ready(tty, filp, info);
709 if (retval) {
710 DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval));
711 goto cleanup;
712 }
713
714 retval = 0;
715
716 cleanup:
717 if (retval) {
718 if (tty->count == 1)
719 info->port.tty = NULL; /* tty layer will release tty struct */
720 if(info->port.count)
721 info->port.count--;
722 }
723
724 DBGINFO(("%s open rc=%d\n", info->device_name, retval));
725 return retval;
726 }
727
728 static void close(struct tty_struct *tty, struct file *filp)
729 {
730 struct slgt_info *info = tty->driver_data;
731
732 if (sanity_check(info, tty->name, "close"))
733 return;
734 DBGINFO(("%s close entry, count=%d\n", info->device_name, info->port.count));
735
736 if (tty_port_close_start(&info->port, tty, filp) == 0)
737 goto cleanup;
738
739 mutex_lock(&info->port.mutex);
740 if (info->port.flags & ASYNC_INITIALIZED)
741 wait_until_sent(tty, info->timeout);
742 flush_buffer(tty);
743 tty_ldisc_flush(tty);
744
745 shutdown(info);
746 mutex_unlock(&info->port.mutex);
747
748 tty_port_close_end(&info->port, tty);
749 info->port.tty = NULL;
750 cleanup:
751 DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->port.count));
752 }
753
754 static void hangup(struct tty_struct *tty)
755 {
756 struct slgt_info *info = tty->driver_data;
757 unsigned long flags;
758
759 if (sanity_check(info, tty->name, "hangup"))
760 return;
761 DBGINFO(("%s hangup\n", info->device_name));
762
763 flush_buffer(tty);
764
765 mutex_lock(&info->port.mutex);
766 shutdown(info);
767
768 spin_lock_irqsave(&info->port.lock, flags);
769 info->port.count = 0;
770 info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
771 info->port.tty = NULL;
772 spin_unlock_irqrestore(&info->port.lock, flags);
773 mutex_unlock(&info->port.mutex);
774
775 wake_up_interruptible(&info->port.open_wait);
776 }
777
778 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
779 {
780 struct slgt_info *info = tty->driver_data;
781 unsigned long flags;
782
783 DBGINFO(("%s set_termios\n", tty->driver->name));
784
785 change_params(info);
786
787 /* Handle transition to B0 status */
788 if (old_termios->c_cflag & CBAUD &&
789 !(tty->termios->c_cflag & CBAUD)) {
790 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
791 spin_lock_irqsave(&info->lock,flags);
792 set_signals(info);
793 spin_unlock_irqrestore(&info->lock,flags);
794 }
795
796 /* Handle transition away from B0 status */
797 if (!(old_termios->c_cflag & CBAUD) &&
798 tty->termios->c_cflag & CBAUD) {
799 info->signals |= SerialSignal_DTR;
800 if (!(tty->termios->c_cflag & CRTSCTS) ||
801 !test_bit(TTY_THROTTLED, &tty->flags)) {
802 info->signals |= SerialSignal_RTS;
803 }
804 spin_lock_irqsave(&info->lock,flags);
805 set_signals(info);
806 spin_unlock_irqrestore(&info->lock,flags);
807 }
808
809 /* Handle turning off CRTSCTS */
810 if (old_termios->c_cflag & CRTSCTS &&
811 !(tty->termios->c_cflag & CRTSCTS)) {
812 tty->hw_stopped = 0;
813 tx_release(tty);
814 }
815 }
816
817 static void update_tx_timer(struct slgt_info *info)
818 {
819 /*
820 * use worst case speed of 1200bps to calculate transmit timeout
821 * based on data in buffers (tbuf_bytes) and FIFO (128 bytes)
822 */
823 if (info->params.mode == MGSL_MODE_HDLC) {
824 int timeout = (tbuf_bytes(info) * 7) + 1000;
825 mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(timeout));
826 }
827 }
828
829 static int write(struct tty_struct *tty,
830 const unsigned char *buf, int count)
831 {
832 int ret = 0;
833 struct slgt_info *info = tty->driver_data;
834 unsigned long flags;
835
836 if (sanity_check(info, tty->name, "write"))
837 return -EIO;
838
839 DBGINFO(("%s write count=%d\n", info->device_name, count));
840
841 if (!info->tx_buf || (count > info->max_frame_size))
842 return -EIO;
843
844 if (!count || tty->stopped || tty->hw_stopped)
845 return 0;
846
847 spin_lock_irqsave(&info->lock, flags);
848
849 if (info->tx_count) {
850 /* send accumulated data from send_char() */
851 if (!tx_load(info, info->tx_buf, info->tx_count))
852 goto cleanup;
853 info->tx_count = 0;
854 }
855
856 if (tx_load(info, buf, count))
857 ret = count;
858
859 cleanup:
860 spin_unlock_irqrestore(&info->lock, flags);
861 DBGINFO(("%s write rc=%d\n", info->device_name, ret));
862 return ret;
863 }
864
865 static int put_char(struct tty_struct *tty, unsigned char ch)
866 {
867 struct slgt_info *info = tty->driver_data;
868 unsigned long flags;
869 int ret = 0;
870
871 if (sanity_check(info, tty->name, "put_char"))
872 return 0;
873 DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
874 if (!info->tx_buf)
875 return 0;
876 spin_lock_irqsave(&info->lock,flags);
877 if (info->tx_count < info->max_frame_size) {
878 info->tx_buf[info->tx_count++] = ch;
879 ret = 1;
880 }
881 spin_unlock_irqrestore(&info->lock,flags);
882 return ret;
883 }
884
885 static void send_xchar(struct tty_struct *tty, char ch)
886 {
887 struct slgt_info *info = tty->driver_data;
888 unsigned long flags;
889
890 if (sanity_check(info, tty->name, "send_xchar"))
891 return;
892 DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch));
893 info->x_char = ch;
894 if (ch) {
895 spin_lock_irqsave(&info->lock,flags);
896 if (!info->tx_enabled)
897 tx_start(info);
898 spin_unlock_irqrestore(&info->lock,flags);
899 }
900 }
901
902 static void wait_until_sent(struct tty_struct *tty, int timeout)
903 {
904 struct slgt_info *info = tty->driver_data;
905 unsigned long orig_jiffies, char_time;
906
907 if (!info )
908 return;
909 if (sanity_check(info, tty->name, "wait_until_sent"))
910 return;
911 DBGINFO(("%s wait_until_sent entry\n", info->device_name));
912 if (!(info->port.flags & ASYNC_INITIALIZED))
913 goto exit;
914
915 orig_jiffies = jiffies;
916
917 /* Set check interval to 1/5 of estimated time to
918 * send a character, and make it at least 1. The check
919 * interval should also be less than the timeout.
920 * Note: use tight timings here to satisfy the NIST-PCTS.
921 */
922
923 if (info->params.data_rate) {
924 char_time = info->timeout/(32 * 5);
925 if (!char_time)
926 char_time++;
927 } else
928 char_time = 1;
929
930 if (timeout)
931 char_time = min_t(unsigned long, char_time, timeout);
932
933 while (info->tx_active) {
934 msleep_interruptible(jiffies_to_msecs(char_time));
935 if (signal_pending(current))
936 break;
937 if (timeout && time_after(jiffies, orig_jiffies + timeout))
938 break;
939 }
940 exit:
941 DBGINFO(("%s wait_until_sent exit\n", info->device_name));
942 }
943
944 static int write_room(struct tty_struct *tty)
945 {
946 struct slgt_info *info = tty->driver_data;
947 int ret;
948
949 if (sanity_check(info, tty->name, "write_room"))
950 return 0;
951 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
952 DBGINFO(("%s write_room=%d\n", info->device_name, ret));
953 return ret;
954 }
955
956 static void flush_chars(struct tty_struct *tty)
957 {
958 struct slgt_info *info = tty->driver_data;
959 unsigned long flags;
960
961 if (sanity_check(info, tty->name, "flush_chars"))
962 return;
963 DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count));
964
965 if (info->tx_count <= 0 || tty->stopped ||
966 tty->hw_stopped || !info->tx_buf)
967 return;
968
969 DBGINFO(("%s flush_chars start transmit\n", info->device_name));
970
971 spin_lock_irqsave(&info->lock,flags);
972 if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count))
973 info->tx_count = 0;
974 spin_unlock_irqrestore(&info->lock,flags);
975 }
976
977 static void flush_buffer(struct tty_struct *tty)
978 {
979 struct slgt_info *info = tty->driver_data;
980 unsigned long flags;
981
982 if (sanity_check(info, tty->name, "flush_buffer"))
983 return;
984 DBGINFO(("%s flush_buffer\n", info->device_name));
985
986 spin_lock_irqsave(&info->lock, flags);
987 info->tx_count = 0;
988 spin_unlock_irqrestore(&info->lock, flags);
989
990 tty_wakeup(tty);
991 }
992
993 /*
994 * throttle (stop) transmitter
995 */
996 static void tx_hold(struct tty_struct *tty)
997 {
998 struct slgt_info *info = tty->driver_data;
999 unsigned long flags;
1000
1001 if (sanity_check(info, tty->name, "tx_hold"))
1002 return;
1003 DBGINFO(("%s tx_hold\n", info->device_name));
1004 spin_lock_irqsave(&info->lock,flags);
1005 if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC)
1006 tx_stop(info);
1007 spin_unlock_irqrestore(&info->lock,flags);
1008 }
1009
1010 /*
1011 * release (start) transmitter
1012 */
1013 static void tx_release(struct tty_struct *tty)
1014 {
1015 struct slgt_info *info = tty->driver_data;
1016 unsigned long flags;
1017
1018 if (sanity_check(info, tty->name, "tx_release"))
1019 return;
1020 DBGINFO(("%s tx_release\n", info->device_name));
1021 spin_lock_irqsave(&info->lock, flags);
1022 if (info->tx_count && tx_load(info, info->tx_buf, info->tx_count))
1023 info->tx_count = 0;
1024 spin_unlock_irqrestore(&info->lock, flags);
1025 }
1026
1027 /*
1028 * Service an IOCTL request
1029 *
1030 * Arguments
1031 *
1032 * tty pointer to tty instance data
1033 * cmd IOCTL command code
1034 * arg command argument/context
1035 *
1036 * Return 0 if success, otherwise error code
1037 */
1038 static int ioctl(struct tty_struct *tty,
1039 unsigned int cmd, unsigned long arg)
1040 {
1041 struct slgt_info *info = tty->driver_data;
1042 void __user *argp = (void __user *)arg;
1043 int ret;
1044
1045 if (sanity_check(info, tty->name, "ioctl"))
1046 return -ENODEV;
1047 DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd));
1048
1049 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1050 (cmd != TIOCMIWAIT)) {
1051 if (tty->flags & (1 << TTY_IO_ERROR))
1052 return -EIO;
1053 }
1054
1055 switch (cmd) {
1056 case MGSL_IOCWAITEVENT:
1057 return wait_mgsl_event(info, argp);
1058 case TIOCMIWAIT:
1059 return modem_input_wait(info,(int)arg);
1060 case MGSL_IOCSGPIO:
1061 return set_gpio(info, argp);
1062 case MGSL_IOCGGPIO:
1063 return get_gpio(info, argp);
1064 case MGSL_IOCWAITGPIO:
1065 return wait_gpio(info, argp);
1066 case MGSL_IOCGXSYNC:
1067 return get_xsync(info, argp);
1068 case MGSL_IOCSXSYNC:
1069 return set_xsync(info, (int)arg);
1070 case MGSL_IOCGXCTRL:
1071 return get_xctrl(info, argp);
1072 case MGSL_IOCSXCTRL:
1073 return set_xctrl(info, (int)arg);
1074 }
1075 mutex_lock(&info->port.mutex);
1076 switch (cmd) {
1077 case MGSL_IOCGPARAMS:
1078 ret = get_params(info, argp);
1079 break;
1080 case MGSL_IOCSPARAMS:
1081 ret = set_params(info, argp);
1082 break;
1083 case MGSL_IOCGTXIDLE:
1084 ret = get_txidle(info, argp);
1085 break;
1086 case MGSL_IOCSTXIDLE:
1087 ret = set_txidle(info, (int)arg);
1088 break;
1089 case MGSL_IOCTXENABLE:
1090 ret = tx_enable(info, (int)arg);
1091 break;
1092 case MGSL_IOCRXENABLE:
1093 ret = rx_enable(info, (int)arg);
1094 break;
1095 case MGSL_IOCTXABORT:
1096 ret = tx_abort(info);
1097 break;
1098 case MGSL_IOCGSTATS:
1099 ret = get_stats(info, argp);
1100 break;
1101 case MGSL_IOCGIF:
1102 ret = get_interface(info, argp);
1103 break;
1104 case MGSL_IOCSIF:
1105 ret = set_interface(info,(int)arg);
1106 break;
1107 default:
1108 ret = -ENOIOCTLCMD;
1109 }
1110 mutex_unlock(&info->port.mutex);
1111 return ret;
1112 }
1113
1114 static int get_icount(struct tty_struct *tty,
1115 struct serial_icounter_struct *icount)
1116
1117 {
1118 struct slgt_info *info = tty->driver_data;
1119 struct mgsl_icount cnow; /* kernel counter temps */
1120 unsigned long flags;
1121
1122 spin_lock_irqsave(&info->lock,flags);
1123 cnow = info->icount;
1124 spin_unlock_irqrestore(&info->lock,flags);
1125
1126 icount->cts = cnow.cts;
1127 icount->dsr = cnow.dsr;
1128 icount->rng = cnow.rng;
1129 icount->dcd = cnow.dcd;
1130 icount->rx = cnow.rx;
1131 icount->tx = cnow.tx;
1132 icount->frame = cnow.frame;
1133 icount->overrun = cnow.overrun;
1134 icount->parity = cnow.parity;
1135 icount->brk = cnow.brk;
1136 icount->buf_overrun = cnow.buf_overrun;
1137
1138 return 0;
1139 }
1140
1141 /*
1142 * support for 32 bit ioctl calls on 64 bit systems
1143 */
1144 #ifdef CONFIG_COMPAT
1145 static long get_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *user_params)
1146 {
1147 struct MGSL_PARAMS32 tmp_params;
1148
1149 DBGINFO(("%s get_params32\n", info->device_name));
1150 memset(&tmp_params, 0, sizeof(tmp_params));
1151 tmp_params.mode = (compat_ulong_t)info->params.mode;
1152 tmp_params.loopback = info->params.loopback;
1153 tmp_params.flags = info->params.flags;
1154 tmp_params.encoding = info->params.encoding;
1155 tmp_params.clock_speed = (compat_ulong_t)info->params.clock_speed;
1156 tmp_params.addr_filter = info->params.addr_filter;
1157 tmp_params.crc_type = info->params.crc_type;
1158 tmp_params.preamble_length = info->params.preamble_length;
1159 tmp_params.preamble = info->params.preamble;
1160 tmp_params.data_rate = (compat_ulong_t)info->params.data_rate;
1161 tmp_params.data_bits = info->params.data_bits;
1162 tmp_params.stop_bits = info->params.stop_bits;
1163 tmp_params.parity = info->params.parity;
1164 if (copy_to_user(user_params, &tmp_params, sizeof(struct MGSL_PARAMS32)))
1165 return -EFAULT;
1166 return 0;
1167 }
1168
1169 static long set_params32(struct slgt_info *info, struct MGSL_PARAMS32 __user *new_params)
1170 {
1171 struct MGSL_PARAMS32 tmp_params;
1172
1173 DBGINFO(("%s set_params32\n", info->device_name));
1174 if (copy_from_user(&tmp_params, new_params, sizeof(struct MGSL_PARAMS32)))
1175 return -EFAULT;
1176
1177 spin_lock(&info->lock);
1178 if (tmp_params.mode == MGSL_MODE_BASE_CLOCK) {
1179 info->base_clock = tmp_params.clock_speed;
1180 } else {
1181 info->params.mode = tmp_params.mode;
1182 info->params.loopback = tmp_params.loopback;
1183 info->params.flags = tmp_params.flags;
1184 info->params.encoding = tmp_params.encoding;
1185 info->params.clock_speed = tmp_params.clock_speed;
1186 info->params.addr_filter = tmp_params.addr_filter;
1187 info->params.crc_type = tmp_params.crc_type;
1188 info->params.preamble_length = tmp_params.preamble_length;
1189 info->params.preamble = tmp_params.preamble;
1190 info->params.data_rate = tmp_params.data_rate;
1191 info->params.data_bits = tmp_params.data_bits;
1192 info->params.stop_bits = tmp_params.stop_bits;
1193 info->params.parity = tmp_params.parity;
1194 }
1195 spin_unlock(&info->lock);
1196
1197 program_hw(info);
1198
1199 return 0;
1200 }
1201
1202 static long slgt_compat_ioctl(struct tty_struct *tty,
1203 unsigned int cmd, unsigned long arg)
1204 {
1205 struct slgt_info *info = tty->driver_data;
1206 int rc = -ENOIOCTLCMD;
1207
1208 if (sanity_check(info, tty->name, "compat_ioctl"))
1209 return -ENODEV;
1210 DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
1211
1212 switch (cmd) {
1213
1214 case MGSL_IOCSPARAMS32:
1215 rc = set_params32(info, compat_ptr(arg));
1216 break;
1217
1218 case MGSL_IOCGPARAMS32:
1219 rc = get_params32(info, compat_ptr(arg));
1220 break;
1221
1222 case MGSL_IOCGPARAMS:
1223 case MGSL_IOCSPARAMS:
1224 case MGSL_IOCGTXIDLE:
1225 case MGSL_IOCGSTATS:
1226 case MGSL_IOCWAITEVENT:
1227 case MGSL_IOCGIF:
1228 case MGSL_IOCSGPIO:
1229 case MGSL_IOCGGPIO:
1230 case MGSL_IOCWAITGPIO:
1231 case MGSL_IOCGXSYNC:
1232 case MGSL_IOCGXCTRL:
1233 case MGSL_IOCSTXIDLE:
1234 case MGSL_IOCTXENABLE:
1235 case MGSL_IOCRXENABLE:
1236 case MGSL_IOCTXABORT:
1237 case TIOCMIWAIT:
1238 case MGSL_IOCSIF:
1239 case MGSL_IOCSXSYNC:
1240 case MGSL_IOCSXCTRL:
1241 rc = ioctl(tty, cmd, arg);
1242 break;
1243 }
1244
1245 DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
1246 return rc;
1247 }
1248 #else
1249 #define slgt_compat_ioctl NULL
1250 #endif /* ifdef CONFIG_COMPAT */
1251
1252 /*
1253 * proc fs support
1254 */
1255 static inline void line_info(struct seq_file *m, struct slgt_info *info)
1256 {
1257 char stat_buf[30];
1258 unsigned long flags;
1259
1260 seq_printf(m, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n",
1261 info->device_name, info->phys_reg_addr,
1262 info->irq_level, info->max_frame_size);
1263
1264 /* output current serial signal states */
1265 spin_lock_irqsave(&info->lock,flags);
1266 get_signals(info);
1267 spin_unlock_irqrestore(&info->lock,flags);
1268
1269 stat_buf[0] = 0;
1270 stat_buf[1] = 0;
1271 if (info->signals & SerialSignal_RTS)
1272 strcat(stat_buf, "|RTS");
1273 if (info->signals & SerialSignal_CTS)
1274 strcat(stat_buf, "|CTS");
1275 if (info->signals & SerialSignal_DTR)
1276 strcat(stat_buf, "|DTR");
1277 if (info->signals & SerialSignal_DSR)
1278 strcat(stat_buf, "|DSR");
1279 if (info->signals & SerialSignal_DCD)
1280 strcat(stat_buf, "|CD");
1281 if (info->signals & SerialSignal_RI)
1282 strcat(stat_buf, "|RI");
1283
1284 if (info->params.mode != MGSL_MODE_ASYNC) {
1285 seq_printf(m, "\tHDLC txok:%d rxok:%d",
1286 info->icount.txok, info->icount.rxok);
1287 if (info->icount.txunder)
1288 seq_printf(m, " txunder:%d", info->icount.txunder);
1289 if (info->icount.txabort)
1290 seq_printf(m, " txabort:%d", info->icount.txabort);
1291 if (info->icount.rxshort)
1292 seq_printf(m, " rxshort:%d", info->icount.rxshort);
1293 if (info->icount.rxlong)
1294 seq_printf(m, " rxlong:%d", info->icount.rxlong);
1295 if (info->icount.rxover)
1296 seq_printf(m, " rxover:%d", info->icount.rxover);
1297 if (info->icount.rxcrc)
1298 seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
1299 } else {
1300 seq_printf(m, "\tASYNC tx:%d rx:%d",
1301 info->icount.tx, info->icount.rx);
1302 if (info->icount.frame)
1303 seq_printf(m, " fe:%d", info->icount.frame);
1304 if (info->icount.parity)
1305 seq_printf(m, " pe:%d", info->icount.parity);
1306 if (info->icount.brk)
1307 seq_printf(m, " brk:%d", info->icount.brk);
1308 if (info->icount.overrun)
1309 seq_printf(m, " oe:%d", info->icount.overrun);
1310 }
1311
1312 /* Append serial signal status to end */
1313 seq_printf(m, " %s\n", stat_buf+1);
1314
1315 seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1316 info->tx_active,info->bh_requested,info->bh_running,
1317 info->pending_bh);
1318 }
1319
1320 /* Called to print information about devices
1321 */
1322 static int synclink_gt_proc_show(struct seq_file *m, void *v)
1323 {
1324 struct slgt_info *info;
1325
1326 seq_puts(m, "synclink_gt driver\n");
1327
1328 info = slgt_device_list;
1329 while( info ) {
1330 line_info(m, info);
1331 info = info->next_device;
1332 }
1333 return 0;
1334 }
1335
1336 static int synclink_gt_proc_open(struct inode *inode, struct file *file)
1337 {
1338 return single_open(file, synclink_gt_proc_show, NULL);
1339 }
1340
1341 static const struct file_operations synclink_gt_proc_fops = {
1342 .owner = THIS_MODULE,
1343 .open = synclink_gt_proc_open,
1344 .read = seq_read,
1345 .llseek = seq_lseek,
1346 .release = single_release,
1347 };
1348
1349 /*
1350 * return count of bytes in transmit buffer
1351 */
1352 static int chars_in_buffer(struct tty_struct *tty)
1353 {
1354 struct slgt_info *info = tty->driver_data;
1355 int count;
1356 if (sanity_check(info, tty->name, "chars_in_buffer"))
1357 return 0;
1358 count = tbuf_bytes(info);
1359 DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, count));
1360 return count;
1361 }
1362
1363 /*
1364 * signal remote device to throttle send data (our receive data)
1365 */
1366 static void throttle(struct tty_struct * tty)
1367 {
1368 struct slgt_info *info = tty->driver_data;
1369 unsigned long flags;
1370
1371 if (sanity_check(info, tty->name, "throttle"))
1372 return;
1373 DBGINFO(("%s throttle\n", info->device_name));
1374 if (I_IXOFF(tty))
1375 send_xchar(tty, STOP_CHAR(tty));
1376 if (tty->termios->c_cflag & CRTSCTS) {
1377 spin_lock_irqsave(&info->lock,flags);
1378 info->signals &= ~SerialSignal_RTS;
1379 set_signals(info);
1380 spin_unlock_irqrestore(&info->lock,flags);
1381 }
1382 }
1383
1384 /*
1385 * signal remote device to stop throttling send data (our receive data)
1386 */
1387 static void unthrottle(struct tty_struct * tty)
1388 {
1389 struct slgt_info *info = tty->driver_data;
1390 unsigned long flags;
1391
1392 if (sanity_check(info, tty->name, "unthrottle"))
1393 return;
1394 DBGINFO(("%s unthrottle\n", info->device_name));
1395 if (I_IXOFF(tty)) {
1396 if (info->x_char)
1397 info->x_char = 0;
1398 else
1399 send_xchar(tty, START_CHAR(tty));
1400 }
1401 if (tty->termios->c_cflag & CRTSCTS) {
1402 spin_lock_irqsave(&info->lock,flags);
1403 info->signals |= SerialSignal_RTS;
1404 set_signals(info);
1405 spin_unlock_irqrestore(&info->lock,flags);
1406 }
1407 }
1408
1409 /*
1410 * set or clear transmit break condition
1411 * break_state -1=set break condition, 0=clear
1412 */
1413 static int set_break(struct tty_struct *tty, int break_state)
1414 {
1415 struct slgt_info *info = tty->driver_data;
1416 unsigned short value;
1417 unsigned long flags;
1418
1419 if (sanity_check(info, tty->name, "set_break"))
1420 return -EINVAL;
1421 DBGINFO(("%s set_break(%d)\n", info->device_name, break_state));
1422
1423 spin_lock_irqsave(&info->lock,flags);
1424 value = rd_reg16(info, TCR);
1425 if (break_state == -1)
1426 value |= BIT6;
1427 else
1428 value &= ~BIT6;
1429 wr_reg16(info, TCR, value);
1430 spin_unlock_irqrestore(&info->lock,flags);
1431 return 0;
1432 }
1433
1434 #if SYNCLINK_GENERIC_HDLC
1435
1436 /**
1437 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1438 * set encoding and frame check sequence (FCS) options
1439 *
1440 * dev pointer to network device structure
1441 * encoding serial encoding setting
1442 * parity FCS setting
1443 *
1444 * returns 0 if success, otherwise error code
1445 */
1446 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1447 unsigned short parity)
1448 {
1449 struct slgt_info *info = dev_to_port(dev);
1450 unsigned char new_encoding;
1451 unsigned short new_crctype;
1452
1453 /* return error if TTY interface open */
1454 if (info->port.count)
1455 return -EBUSY;
1456
1457 DBGINFO(("%s hdlcdev_attach\n", info->device_name));
1458
1459 switch (encoding)
1460 {
1461 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
1462 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1463 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1464 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1465 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1466 default: return -EINVAL;
1467 }
1468
1469 switch (parity)
1470 {
1471 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
1472 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1473 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1474 default: return -EINVAL;
1475 }
1476
1477 info->params.encoding = new_encoding;
1478 info->params.crc_type = new_crctype;
1479
1480 /* if network interface up, reprogram hardware */
1481 if (info->netcount)
1482 program_hw(info);
1483
1484 return 0;
1485 }
1486
1487 /**
1488 * called by generic HDLC layer to send frame
1489 *
1490 * skb socket buffer containing HDLC frame
1491 * dev pointer to network device structure
1492 */
1493 static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
1494 struct net_device *dev)
1495 {
1496 struct slgt_info *info = dev_to_port(dev);
1497 unsigned long flags;
1498
1499 DBGINFO(("%s hdlc_xmit\n", dev->name));
1500
1501 if (!skb->len)
1502 return NETDEV_TX_OK;
1503
1504 /* stop sending until this frame completes */
1505 netif_stop_queue(dev);
1506
1507 /* update network statistics */
1508 dev->stats.tx_packets++;
1509 dev->stats.tx_bytes += skb->len;
1510
1511 /* save start time for transmit timeout detection */
1512 dev->trans_start = jiffies;
1513
1514 spin_lock_irqsave(&info->lock, flags);
1515 tx_load(info, skb->data, skb->len);
1516 spin_unlock_irqrestore(&info->lock, flags);
1517
1518 /* done with socket buffer, so free it */
1519 dev_kfree_skb(skb);
1520
1521 return NETDEV_TX_OK;
1522 }
1523
1524 /**
1525 * called by network layer when interface enabled
1526 * claim resources and initialize hardware
1527 *
1528 * dev pointer to network device structure
1529 *
1530 * returns 0 if success, otherwise error code
1531 */
1532 static int hdlcdev_open(struct net_device *dev)
1533 {
1534 struct slgt_info *info = dev_to_port(dev);
1535 int rc;
1536 unsigned long flags;
1537
1538 if (!try_module_get(THIS_MODULE))
1539 return -EBUSY;
1540
1541 DBGINFO(("%s hdlcdev_open\n", dev->name));
1542
1543 /* generic HDLC layer open processing */
1544 if ((rc = hdlc_open(dev)))
1545 return rc;
1546
1547 /* arbitrate between network and tty opens */
1548 spin_lock_irqsave(&info->netlock, flags);
1549 if (info->port.count != 0 || info->netcount != 0) {
1550 DBGINFO(("%s hdlc_open busy\n", dev->name));
1551 spin_unlock_irqrestore(&info->netlock, flags);
1552 return -EBUSY;
1553 }
1554 info->netcount=1;
1555 spin_unlock_irqrestore(&info->netlock, flags);
1556
1557 /* claim resources and init adapter */
1558 if ((rc = startup(info)) != 0) {
1559 spin_lock_irqsave(&info->netlock, flags);
1560 info->netcount=0;
1561 spin_unlock_irqrestore(&info->netlock, flags);
1562 return rc;
1563 }
1564
1565 /* assert DTR and RTS, apply hardware settings */
1566 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
1567 program_hw(info);
1568
1569 /* enable network layer transmit */
1570 dev->trans_start = jiffies;
1571 netif_start_queue(dev);
1572
1573 /* inform generic HDLC layer of current DCD status */
1574 spin_lock_irqsave(&info->lock, flags);
1575 get_signals(info);
1576 spin_unlock_irqrestore(&info->lock, flags);
1577 if (info->signals & SerialSignal_DCD)
1578 netif_carrier_on(dev);
1579 else
1580 netif_carrier_off(dev);
1581 return 0;
1582 }
1583
1584 /**
1585 * called by network layer when interface is disabled
1586 * shutdown hardware and release resources
1587 *
1588 * dev pointer to network device structure
1589 *
1590 * returns 0 if success, otherwise error code
1591 */
1592 static int hdlcdev_close(struct net_device *dev)
1593 {
1594 struct slgt_info *info = dev_to_port(dev);
1595 unsigned long flags;
1596
1597 DBGINFO(("%s hdlcdev_close\n", dev->name));
1598
1599 netif_stop_queue(dev);
1600
1601 /* shutdown adapter and release resources */
1602 shutdown(info);
1603
1604 hdlc_close(dev);
1605
1606 spin_lock_irqsave(&info->netlock, flags);
1607 info->netcount=0;
1608 spin_unlock_irqrestore(&info->netlock, flags);
1609
1610 module_put(THIS_MODULE);
1611 return 0;
1612 }
1613
1614 /**
1615 * called by network layer to process IOCTL call to network device
1616 *
1617 * dev pointer to network device structure
1618 * ifr pointer to network interface request structure
1619 * cmd IOCTL command code
1620 *
1621 * returns 0 if success, otherwise error code
1622 */
1623 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1624 {
1625 const size_t size = sizeof(sync_serial_settings);
1626 sync_serial_settings new_line;
1627 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1628 struct slgt_info *info = dev_to_port(dev);
1629 unsigned int flags;
1630
1631 DBGINFO(("%s hdlcdev_ioctl\n", dev->name));
1632
1633 /* return error if TTY interface open */
1634 if (info->port.count)
1635 return -EBUSY;
1636
1637 if (cmd != SIOCWANDEV)
1638 return hdlc_ioctl(dev, ifr, cmd);
1639
1640 memset(&new_line, 0, sizeof(new_line));
1641
1642 switch(ifr->ifr_settings.type) {
1643 case IF_GET_IFACE: /* return current sync_serial_settings */
1644
1645 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1646 if (ifr->ifr_settings.size < size) {
1647 ifr->ifr_settings.size = size; /* data size wanted */
1648 return -ENOBUFS;
1649 }
1650
1651 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1652 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1653 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1654 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1655
1656 switch (flags){
1657 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1658 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
1659 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
1660 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1661 default: new_line.clock_type = CLOCK_DEFAULT;
1662 }
1663
1664 new_line.clock_rate = info->params.clock_speed;
1665 new_line.loopback = info->params.loopback ? 1:0;
1666
1667 if (copy_to_user(line, &new_line, size))
1668 return -EFAULT;
1669 return 0;
1670
1671 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1672
1673 if(!capable(CAP_NET_ADMIN))
1674 return -EPERM;
1675 if (copy_from_user(&new_line, line, size))
1676 return -EFAULT;
1677
1678 switch (new_line.clock_type)
1679 {
1680 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1681 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1682 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
1683 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
1684 case CLOCK_DEFAULT: flags = info->params.flags &
1685 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1686 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1687 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1688 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
1689 default: return -EINVAL;
1690 }
1691
1692 if (new_line.loopback != 0 && new_line.loopback != 1)
1693 return -EINVAL;
1694
1695 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1696 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1697 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1698 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1699 info->params.flags |= flags;
1700
1701 info->params.loopback = new_line.loopback;
1702
1703 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1704 info->params.clock_speed = new_line.clock_rate;
1705 else
1706 info->params.clock_speed = 0;
1707
1708 /* if network interface up, reprogram hardware */
1709 if (info->netcount)
1710 program_hw(info);
1711 return 0;
1712
1713 default:
1714 return hdlc_ioctl(dev, ifr, cmd);
1715 }
1716 }
1717
1718 /**
1719 * called by network layer when transmit timeout is detected
1720 *
1721 * dev pointer to network device structure
1722 */
1723 static void hdlcdev_tx_timeout(struct net_device *dev)
1724 {
1725 struct slgt_info *info = dev_to_port(dev);
1726 unsigned long flags;
1727
1728 DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name));
1729
1730 dev->stats.tx_errors++;
1731 dev->stats.tx_aborted_errors++;
1732
1733 spin_lock_irqsave(&info->lock,flags);
1734 tx_stop(info);
1735 spin_unlock_irqrestore(&info->lock,flags);
1736
1737 netif_wake_queue(dev);
1738 }
1739
1740 /**
1741 * called by device driver when transmit completes
1742 * reenable network layer transmit if stopped
1743 *
1744 * info pointer to device instance information
1745 */
1746 static void hdlcdev_tx_done(struct slgt_info *info)
1747 {
1748 if (netif_queue_stopped(info->netdev))
1749 netif_wake_queue(info->netdev);
1750 }
1751
1752 /**
1753 * called by device driver when frame received
1754 * pass frame to network layer
1755 *
1756 * info pointer to device instance information
1757 * buf pointer to buffer contianing frame data
1758 * size count of data bytes in buf
1759 */
1760 static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
1761 {
1762 struct sk_buff *skb = dev_alloc_skb(size);
1763 struct net_device *dev = info->netdev;
1764
1765 DBGINFO(("%s hdlcdev_rx\n", dev->name));
1766
1767 if (skb == NULL) {
1768 DBGERR(("%s: can't alloc skb, drop packet\n", dev->name));
1769 dev->stats.rx_dropped++;
1770 return;
1771 }
1772
1773 memcpy(skb_put(skb, size), buf, size);
1774
1775 skb->protocol = hdlc_type_trans(skb, dev);
1776
1777 dev->stats.rx_packets++;
1778 dev->stats.rx_bytes += size;
1779
1780 netif_rx(skb);
1781 }
1782
1783 static const struct net_device_ops hdlcdev_ops = {
1784 .ndo_open = hdlcdev_open,
1785 .ndo_stop = hdlcdev_close,
1786 .ndo_change_mtu = hdlc_change_mtu,
1787 .ndo_start_xmit = hdlc_start_xmit,
1788 .ndo_do_ioctl = hdlcdev_ioctl,
1789 .ndo_tx_timeout = hdlcdev_tx_timeout,
1790 };
1791
1792 /**
1793 * called by device driver when adding device instance
1794 * do generic HDLC initialization
1795 *
1796 * info pointer to device instance information
1797 *
1798 * returns 0 if success, otherwise error code
1799 */
1800 static int hdlcdev_init(struct slgt_info *info)
1801 {
1802 int rc;
1803 struct net_device *dev;
1804 hdlc_device *hdlc;
1805
1806 /* allocate and initialize network and HDLC layer objects */
1807
1808 if (!(dev = alloc_hdlcdev(info))) {
1809 printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name);
1810 return -ENOMEM;
1811 }
1812
1813 /* for network layer reporting purposes only */
1814 dev->mem_start = info->phys_reg_addr;
1815 dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1;
1816 dev->irq = info->irq_level;
1817
1818 /* network layer callbacks and settings */
1819 dev->netdev_ops = &hdlcdev_ops;
1820 dev->watchdog_timeo = 10 * HZ;
1821 dev->tx_queue_len = 50;
1822
1823 /* generic HDLC layer callbacks and settings */
1824 hdlc = dev_to_hdlc(dev);
1825 hdlc->attach = hdlcdev_attach;
1826 hdlc->xmit = hdlcdev_xmit;
1827
1828 /* register objects with HDLC layer */
1829 if ((rc = register_hdlc_device(dev))) {
1830 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1831 free_netdev(dev);
1832 return rc;
1833 }
1834
1835 info->netdev = dev;
1836 return 0;
1837 }
1838
1839 /**
1840 * called by device driver when removing device instance
1841 * do generic HDLC cleanup
1842 *
1843 * info pointer to device instance information
1844 */
1845 static void hdlcdev_exit(struct slgt_info *info)
1846 {
1847 unregister_hdlc_device(info->netdev);
1848 free_netdev(info->netdev);
1849 info->netdev = NULL;
1850 }
1851
1852 #endif /* ifdef CONFIG_HDLC */
1853
1854 /*
1855 * get async data from rx DMA buffers
1856 */
1857 static void rx_async(struct slgt_info *info)
1858 {
1859 struct tty_struct *tty = info->port.tty;
1860 struct mgsl_icount *icount = &info->icount;
1861 unsigned int start, end;
1862 unsigned char *p;
1863 unsigned char status;
1864 struct slgt_desc *bufs = info->rbufs;
1865 int i, count;
1866 int chars = 0;
1867 int stat;
1868 unsigned char ch;
1869
1870 start = end = info->rbuf_current;
1871
1872 while(desc_complete(bufs[end])) {
1873 count = desc_count(bufs[end]) - info->rbuf_index;
1874 p = bufs[end].buf + info->rbuf_index;
1875
1876 DBGISR(("%s rx_async count=%d\n", info->device_name, count));
1877 DBGDATA(info, p, count, "rx");
1878
1879 for(i=0 ; i < count; i+=2, p+=2) {
1880 ch = *p;
1881 icount->rx++;
1882
1883 stat = 0;
1884
1885 if ((status = *(p+1) & (BIT1 + BIT0))) {
1886 if (status & BIT1)
1887 icount->parity++;
1888 else if (status & BIT0)
1889 icount->frame++;
1890 /* discard char if tty control flags say so */
1891 if (status & info->ignore_status_mask)
1892 continue;
1893 if (status & BIT1)
1894 stat = TTY_PARITY;
1895 else if (status & BIT0)
1896 stat = TTY_FRAME;
1897 }
1898 if (tty) {
1899 tty_insert_flip_char(tty, ch, stat);
1900 chars++;
1901 }
1902 }
1903
1904 if (i < count) {
1905 /* receive buffer not completed */
1906 info->rbuf_index += i;
1907 mod_timer(&info->rx_timer, jiffies + 1);
1908 break;
1909 }
1910
1911 info->rbuf_index = 0;
1912 free_rbufs(info, end, end);
1913
1914 if (++end == info->rbuf_count)
1915 end = 0;
1916
1917 /* if entire list searched then no frame available */
1918 if (end == start)
1919 break;
1920 }
1921
1922 if (tty && chars)
1923 tty_flip_buffer_push(tty);
1924 }
1925
1926 /*
1927 * return next bottom half action to perform
1928 */
1929 static int bh_action(struct slgt_info *info)
1930 {
1931 unsigned long flags;
1932 int rc;
1933
1934 spin_lock_irqsave(&info->lock,flags);
1935
1936 if (info->pending_bh & BH_RECEIVE) {
1937 info->pending_bh &= ~BH_RECEIVE;
1938 rc = BH_RECEIVE;
1939 } else if (info->pending_bh & BH_TRANSMIT) {
1940 info->pending_bh &= ~BH_TRANSMIT;
1941 rc = BH_TRANSMIT;
1942 } else if (info->pending_bh & BH_STATUS) {
1943 info->pending_bh &= ~BH_STATUS;
1944 rc = BH_STATUS;
1945 } else {
1946 /* Mark BH routine as complete */
1947 info->bh_running = false;
1948 info->bh_requested = false;
1949 rc = 0;
1950 }
1951
1952 spin_unlock_irqrestore(&info->lock,flags);
1953
1954 return rc;
1955 }
1956
1957 /*
1958 * perform bottom half processing
1959 */
1960 static void bh_handler(struct work_struct *work)
1961 {
1962 struct slgt_info *info = container_of(work, struct slgt_info, task);
1963 int action;
1964
1965 if (!info)
1966 return;
1967 info->bh_running = true;
1968
1969 while((action = bh_action(info))) {
1970 switch (action) {
1971 case BH_RECEIVE:
1972 DBGBH(("%s bh receive\n", info->device_name));
1973 switch(info->params.mode) {
1974 case MGSL_MODE_ASYNC:
1975 rx_async(info);
1976 break;
1977 case MGSL_MODE_HDLC:
1978 while(rx_get_frame(info));
1979 break;
1980 case MGSL_MODE_RAW:
1981 case MGSL_MODE_MONOSYNC:
1982 case MGSL_MODE_BISYNC:
1983 case MGSL_MODE_XSYNC:
1984 while(rx_get_buf(info));
1985 break;
1986 }
1987 /* restart receiver if rx DMA buffers exhausted */
1988 if (info->rx_restart)
1989 rx_start(info);
1990 break;
1991 case BH_TRANSMIT:
1992 bh_transmit(info);
1993 break;
1994 case BH_STATUS:
1995 DBGBH(("%s bh status\n", info->device_name));
1996 info->ri_chkcount = 0;
1997 info->dsr_chkcount = 0;
1998 info->dcd_chkcount = 0;
1999 info->cts_chkcount = 0;
2000 break;
2001 default:
2002 DBGBH(("%s unknown action\n", info->device_name));
2003 break;
2004 }
2005 }
2006 DBGBH(("%s bh_handler exit\n", info->device_name));
2007 }
2008
2009 static void bh_transmit(struct slgt_info *info)
2010 {
2011 struct tty_struct *tty = info->port.tty;
2012
2013 DBGBH(("%s bh_transmit\n", info->device_name));
2014 if (tty)
2015 tty_wakeup(tty);
2016 }
2017
2018 static void dsr_change(struct slgt_info *info, unsigned short status)
2019 {
2020 if (status & BIT3) {
2021 info->signals |= SerialSignal_DSR;
2022 info->input_signal_events.dsr_up++;
2023 } else {
2024 info->signals &= ~SerialSignal_DSR;
2025 info->input_signal_events.dsr_down++;
2026 }
2027 DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals));
2028 if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2029 slgt_irq_off(info, IRQ_DSR);
2030 return;
2031 }
2032 info->icount.dsr++;
2033 wake_up_interruptible(&info->status_event_wait_q);
2034 wake_up_interruptible(&info->event_wait_q);
2035 info->pending_bh |= BH_STATUS;
2036 }
2037
2038 static void cts_change(struct slgt_info *info, unsigned short status)
2039 {
2040 if (status & BIT2) {
2041 info->signals |= SerialSignal_CTS;
2042 info->input_signal_events.cts_up++;
2043 } else {
2044 info->signals &= ~SerialSignal_CTS;
2045 info->input_signal_events.cts_down++;
2046 }
2047 DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals));
2048 if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2049 slgt_irq_off(info, IRQ_CTS);
2050 return;
2051 }
2052 info->icount.cts++;
2053 wake_up_interruptible(&info->status_event_wait_q);
2054 wake_up_interruptible(&info->event_wait_q);
2055 info->pending_bh |= BH_STATUS;
2056
2057 if (info->port.flags & ASYNC_CTS_FLOW) {
2058 if (info->port.tty) {
2059 if (info->port.tty->hw_stopped) {
2060 if (info->signals & SerialSignal_CTS) {
2061 info->port.tty->hw_stopped = 0;
2062 info->pending_bh |= BH_TRANSMIT;
2063 return;
2064 }
2065 } else {
2066 if (!(info->signals & SerialSignal_CTS))
2067 info->port.tty->hw_stopped = 1;
2068 }
2069 }
2070 }
2071 }
2072
2073 static void dcd_change(struct slgt_info *info, unsigned short status)
2074 {
2075 if (status & BIT1) {
2076 info->signals |= SerialSignal_DCD;
2077 info->input_signal_events.dcd_up++;
2078 } else {
2079 info->signals &= ~SerialSignal_DCD;
2080 info->input_signal_events.dcd_down++;
2081 }
2082 DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals));
2083 if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2084 slgt_irq_off(info, IRQ_DCD);
2085 return;
2086 }
2087 info->icount.dcd++;
2088 #if SYNCLINK_GENERIC_HDLC
2089 if (info->netcount) {
2090 if (info->signals & SerialSignal_DCD)
2091 netif_carrier_on(info->netdev);
2092 else
2093 netif_carrier_off(info->netdev);
2094 }
2095 #endif
2096 wake_up_interruptible(&info->status_event_wait_q);
2097 wake_up_interruptible(&info->event_wait_q);
2098 info->pending_bh |= BH_STATUS;
2099
2100 if (info->port.flags & ASYNC_CHECK_CD) {
2101 if (info->signals & SerialSignal_DCD)
2102 wake_up_interruptible(&info->port.open_wait);
2103 else {
2104 if (info->port.tty)
2105 tty_hangup(info->port.tty);
2106 }
2107 }
2108 }
2109
2110 static void ri_change(struct slgt_info *info, unsigned short status)
2111 {
2112 if (status & BIT0) {
2113 info->signals |= SerialSignal_RI;
2114 info->input_signal_events.ri_up++;
2115 } else {
2116 info->signals &= ~SerialSignal_RI;
2117 info->input_signal_events.ri_down++;
2118 }
2119 DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals));
2120 if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) {
2121 slgt_irq_off(info, IRQ_RI);
2122 return;
2123 }
2124 info->icount.rng++;
2125 wake_up_interruptible(&info->status_event_wait_q);
2126 wake_up_interruptible(&info->event_wait_q);
2127 info->pending_bh |= BH_STATUS;
2128 }
2129
2130 static void isr_rxdata(struct slgt_info *info)
2131 {
2132 unsigned int count = info->rbuf_fill_count;
2133 unsigned int i = info->rbuf_fill_index;
2134 unsigned short reg;
2135
2136 while (rd_reg16(info, SSR) & IRQ_RXDATA) {
2137 reg = rd_reg16(info, RDR);
2138 DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg));
2139 if (desc_complete(info->rbufs[i])) {
2140 /* all buffers full */
2141 rx_stop(info);
2142 info->rx_restart = 1;
2143 continue;
2144 }
2145 info->rbufs[i].buf[count++] = (unsigned char)reg;
2146 /* async mode saves status byte to buffer for each data byte */
2147 if (info->params.mode == MGSL_MODE_ASYNC)
2148 info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8);
2149 if (count == info->rbuf_fill_level || (reg & BIT10)) {
2150 /* buffer full or end of frame */
2151 set_desc_count(info->rbufs[i], count);
2152 set_desc_status(info->rbufs[i], BIT15 | (reg >> 8));
2153 info->rbuf_fill_count = count = 0;
2154 if (++i == info->rbuf_count)
2155 i = 0;
2156 info->pending_bh |= BH_RECEIVE;
2157 }
2158 }
2159
2160 info->rbuf_fill_index = i;
2161 info->rbuf_fill_count = count;
2162 }
2163
2164 static void isr_serial(struct slgt_info *info)
2165 {
2166 unsigned short status = rd_reg16(info, SSR);
2167
2168 DBGISR(("%s isr_serial status=%04X\n", info->device_name, status));
2169
2170 wr_reg16(info, SSR, status); /* clear pending */
2171
2172 info->irq_occurred = true;
2173
2174 if (info->params.mode == MGSL_MODE_ASYNC) {
2175 if (status & IRQ_TXIDLE) {
2176 if (info->tx_active)
2177 isr_txeom(info, status);
2178 }
2179 if (info->rx_pio && (status & IRQ_RXDATA))
2180 isr_rxdata(info);
2181 if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
2182 info->icount.brk++;
2183 /* process break detection if tty control allows */
2184 if (info->port.tty) {
2185 if (!(status & info->ignore_status_mask)) {
2186 if (info->read_status_mask & MASK_BREAK) {
2187 tty_insert_flip_char(info->port.tty, 0, TTY_BREAK);
2188 if (info->port.flags & ASYNC_SAK)
2189 do_SAK(info->port.tty);
2190 }
2191 }
2192 }
2193 }
2194 } else {
2195 if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
2196 isr_txeom(info, status);
2197 if (info->rx_pio && (status & IRQ_RXDATA))
2198 isr_rxdata(info);
2199 if (status & IRQ_RXIDLE) {
2200 if (status & RXIDLE)
2201 info->icount.rxidle++;
2202 else
2203 info->icount.exithunt++;
2204 wake_up_interruptible(&info->event_wait_q);
2205 }
2206
2207 if (status & IRQ_RXOVER)
2208 rx_start(info);
2209 }
2210
2211 if (status & IRQ_DSR)
2212 dsr_change(info, status);
2213 if (status & IRQ_CTS)
2214 cts_change(info, status);
2215 if (status & IRQ_DCD)
2216 dcd_change(info, status);
2217 if (status & IRQ_RI)
2218 ri_change(info, status);
2219 }
2220
2221 static void isr_rdma(struct slgt_info *info)
2222 {
2223 unsigned int status = rd_reg32(info, RDCSR);
2224
2225 DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status));
2226
2227 /* RDCSR (rx DMA control/status)
2228 *
2229 * 31..07 reserved
2230 * 06 save status byte to DMA buffer
2231 * 05 error
2232 * 04 eol (end of list)
2233 * 03 eob (end of buffer)
2234 * 02 IRQ enable
2235 * 01 reset
2236 * 00 enable
2237 */
2238 wr_reg32(info, RDCSR, status); /* clear pending */
2239
2240 if (status & (BIT5 + BIT4)) {
2241 DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name));
2242 info->rx_restart = true;
2243 }
2244 info->pending_bh |= BH_RECEIVE;
2245 }
2246
2247 static void isr_tdma(struct slgt_info *info)
2248 {
2249 unsigned int status = rd_reg32(info, TDCSR);
2250
2251 DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status));
2252
2253 /* TDCSR (tx DMA control/status)
2254 *
2255 * 31..06 reserved
2256 * 05 error
2257 * 04 eol (end of list)
2258 * 03 eob (end of buffer)
2259 * 02 IRQ enable
2260 * 01 reset
2261 * 00 enable
2262 */
2263 wr_reg32(info, TDCSR, status); /* clear pending */
2264
2265 if (status & (BIT5 + BIT4 + BIT3)) {
2266 // another transmit buffer has completed
2267 // run bottom half to get more send data from user
2268 info->pending_bh |= BH_TRANSMIT;
2269 }
2270 }
2271
2272 /*
2273 * return true if there are unsent tx DMA buffers, otherwise false
2274 *
2275 * if there are unsent buffers then info->tbuf_start
2276 * is set to index of first unsent buffer
2277 */
2278 static bool unsent_tbufs(struct slgt_info *info)
2279 {
2280 unsigned int i = info->tbuf_current;
2281 bool rc = false;
2282
2283 /*
2284 * search backwards from last loaded buffer (precedes tbuf_current)
2285 * for first unsent buffer (desc_count > 0)
2286 */
2287
2288 do {
2289 if (i)
2290 i--;
2291 else
2292 i = info->tbuf_count - 1;
2293 if (!desc_count(info->tbufs[i]))
2294 break;
2295 info->tbuf_start = i;
2296 rc = true;
2297 } while (i != info->tbuf_current);
2298
2299 return rc;
2300 }
2301
2302 static void isr_txeom(struct slgt_info *info, unsigned short status)
2303 {
2304 DBGISR(("%s txeom status=%04x\n", info->device_name, status));
2305
2306 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
2307 tdma_reset(info);
2308 if (status & IRQ_TXUNDER) {
2309 unsigned short val = rd_reg16(info, TCR);
2310 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
2311 wr_reg16(info, TCR, val); /* clear reset bit */
2312 }
2313
2314 if (info->tx_active) {
2315 if (info->params.mode != MGSL_MODE_ASYNC) {
2316 if (status & IRQ_TXUNDER)
2317 info->icount.txunder++;
2318 else if (status & IRQ_TXIDLE)
2319 info->icount.txok++;
2320 }
2321
2322 if (unsent_tbufs(info)) {
2323 tx_start(info);
2324 update_tx_timer(info);
2325 return;
2326 }
2327 info->tx_active = false;
2328
2329 del_timer(&info->tx_timer);
2330
2331 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) {
2332 info->signals &= ~SerialSignal_RTS;
2333 info->drop_rts_on_tx_done = false;
2334 set_signals(info);
2335 }
2336
2337 #if SYNCLINK_GENERIC_HDLC
2338 if (info->netcount)
2339 hdlcdev_tx_done(info);
2340 else
2341 #endif
2342 {
2343 if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2344 tx_stop(info);
2345 return;
2346 }
2347 info->pending_bh |= BH_TRANSMIT;
2348 }
2349 }
2350 }
2351
2352 static void isr_gpio(struct slgt_info *info, unsigned int changed, unsigned int state)
2353 {
2354 struct cond_wait *w, *prev;
2355
2356 /* wake processes waiting for specific transitions */
2357 for (w = info->gpio_wait_q, prev = NULL ; w != NULL ; w = w->next) {
2358 if (w->data & changed) {
2359 w->data = state;
2360 wake_up_interruptible(&w->q);
2361 if (prev != NULL)
2362 prev->next = w->next;
2363 else
2364 info->gpio_wait_q = w->next;
2365 } else
2366 prev = w;
2367 }
2368 }
2369
2370 /* interrupt service routine
2371 *
2372 * irq interrupt number
2373 * dev_id device ID supplied during interrupt registration
2374 */
2375 static irqreturn_t slgt_interrupt(int dummy, void *dev_id)
2376 {
2377 struct slgt_info *info = dev_id;
2378 unsigned int gsr;
2379 unsigned int i;
2380
2381 DBGISR(("slgt_interrupt irq=%d entry\n", info->irq_level));
2382
2383 while((gsr = rd_reg32(info, GSR) & 0xffffff00)) {
2384 DBGISR(("%s gsr=%08x\n", info->device_name, gsr));
2385 info->irq_occurred = true;
2386 for(i=0; i < info->port_count ; i++) {
2387 if (info->port_array[i] == NULL)
2388 continue;
2389 spin_lock(&info->port_array[i]->lock);
2390 if (gsr & (BIT8 << i))
2391 isr_serial(info->port_array[i]);
2392 if (gsr & (BIT16 << (i*2)))
2393 isr_rdma(info->port_array[i]);
2394 if (gsr & (BIT17 << (i*2)))
2395 isr_tdma(info->port_array[i]);
2396 spin_unlock(&info->port_array[i]->lock);
2397 }
2398 }
2399
2400 if (info->gpio_present) {
2401 unsigned int state;
2402 unsigned int changed;
2403 spin_lock(&info->lock);
2404 while ((changed = rd_reg32(info, IOSR)) != 0) {
2405 DBGISR(("%s iosr=%08x\n", info->device_name, changed));
2406 /* read latched state of GPIO signals */
2407 state = rd_reg32(info, IOVR);
2408 /* clear pending GPIO interrupt bits */
2409 wr_reg32(info, IOSR, changed);
2410 for (i=0 ; i < info->port_count ; i++) {
2411 if (info->port_array[i] != NULL)
2412 isr_gpio(info->port_array[i], changed, state);
2413 }
2414 }
2415 spin_unlock(&info->lock);
2416 }
2417
2418 for(i=0; i < info->port_count ; i++) {
2419 struct slgt_info *port = info->port_array[i];
2420 if (port == NULL)
2421 continue;
2422 spin_lock(&port->lock);
2423 if ((port->port.count || port->netcount) &&
2424 port->pending_bh && !port->bh_running &&
2425 !port->bh_requested) {
2426 DBGISR(("%s bh queued\n", port->device_name));
2427 schedule_work(&port->task);
2428 port->bh_requested = true;
2429 }
2430 spin_unlock(&port->lock);
2431 }
2432
2433 DBGISR(("slgt_interrupt irq=%d exit\n", info->irq_level));
2434 return IRQ_HANDLED;
2435 }
2436
2437 static int startup(struct slgt_info *info)
2438 {
2439 DBGINFO(("%s startup\n", info->device_name));
2440
2441 if (info->port.flags & ASYNC_INITIALIZED)
2442 return 0;
2443
2444 if (!info->tx_buf) {
2445 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2446 if (!info->tx_buf) {
2447 DBGERR(("%s can't allocate tx buffer\n", info->device_name));
2448 return -ENOMEM;
2449 }
2450 }
2451
2452 info->pending_bh = 0;
2453
2454 memset(&info->icount, 0, sizeof(info->icount));
2455
2456 /* program hardware for current parameters */
2457 change_params(info);
2458
2459 if (info->port.tty)
2460 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
2461
2462 info->port.flags |= ASYNC_INITIALIZED;
2463
2464 return 0;
2465 }
2466
2467 /*
2468 * called by close() and hangup() to shutdown hardware
2469 */
2470 static void shutdown(struct slgt_info *info)
2471 {
2472 unsigned long flags;
2473
2474 if (!(info->port.flags & ASYNC_INITIALIZED))
2475 return;
2476
2477 DBGINFO(("%s shutdown\n", info->device_name));
2478
2479 /* clear status wait queue because status changes */
2480 /* can't happen after shutting down the hardware */
2481 wake_up_interruptible(&info->status_event_wait_q);
2482 wake_up_interruptible(&info->event_wait_q);
2483
2484 del_timer_sync(&info->tx_timer);
2485 del_timer_sync(&info->rx_timer);
2486
2487 kfree(info->tx_buf);
2488 info->tx_buf = NULL;
2489
2490 spin_lock_irqsave(&info->lock,flags);
2491
2492 tx_stop(info);
2493 rx_stop(info);
2494
2495 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
2496
2497 if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
2498 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2499 set_signals(info);
2500 }
2501
2502 flush_cond_wait(&info->gpio_wait_q);
2503
2504 spin_unlock_irqrestore(&info->lock,flags);
2505
2506 if (info->port.tty)
2507 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
2508
2509 info->port.flags &= ~ASYNC_INITIALIZED;
2510 }
2511
2512 static void program_hw(struct slgt_info *info)
2513 {
2514 unsigned long flags;
2515
2516 spin_lock_irqsave(&info->lock,flags);
2517
2518 rx_stop(info);
2519 tx_stop(info);
2520
2521 if (info->params.mode != MGSL_MODE_ASYNC ||
2522 info->netcount)
2523 sync_mode(info);
2524 else
2525 async_mode(info);
2526
2527 set_signals(info);
2528
2529 info->dcd_chkcount = 0;
2530 info->cts_chkcount = 0;
2531 info->ri_chkcount = 0;
2532 info->dsr_chkcount = 0;
2533
2534 slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI);
2535 get_signals(info);
2536
2537 if (info->netcount ||
2538 (info->port.tty && info->port.tty->termios->c_cflag & CREAD))
2539 rx_start(info);
2540
2541 spin_unlock_irqrestore(&info->lock,flags);
2542 }
2543
2544 /*
2545 * reconfigure adapter based on new parameters
2546 */
2547 static void change_params(struct slgt_info *info)
2548 {
2549 unsigned cflag;
2550 int bits_per_char;
2551
2552 if (!info->port.tty || !info->port.tty->termios)
2553 return;
2554 DBGINFO(("%s change_params\n", info->device_name));
2555
2556 cflag = info->port.tty->termios->c_cflag;
2557
2558 /* if B0 rate (hangup) specified then negate DTR and RTS */
2559 /* otherwise assert DTR and RTS */
2560 if (cflag & CBAUD)
2561 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
2562 else
2563 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2564
2565 /* byte size and parity */
2566
2567 switch (cflag & CSIZE) {
2568 case CS5: info->params.data_bits = 5; break;
2569 case CS6: info->params.data_bits = 6; break;
2570 case CS7: info->params.data_bits = 7; break;
2571 case CS8: info->params.data_bits = 8; break;
2572 default: info->params.data_bits = 7; break;
2573 }
2574
2575 info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1;
2576
2577 if (cflag & PARENB)
2578 info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN;
2579 else
2580 info->params.parity = ASYNC_PARITY_NONE;
2581
2582 /* calculate number of jiffies to transmit a full
2583 * FIFO (32 bytes) at specified data rate
2584 */
2585 bits_per_char = info->params.data_bits +
2586 info->params.stop_bits + 1;
2587
2588 info->params.data_rate = tty_get_baud_rate(info->port.tty);
2589
2590 if (info->params.data_rate) {
2591 info->timeout = (32*HZ*bits_per_char) /
2592 info->params.data_rate;
2593 }
2594 info->timeout += HZ/50; /* Add .02 seconds of slop */
2595
2596 if (cflag & CRTSCTS)
2597 info->port.flags |= ASYNC_CTS_FLOW;
2598 else
2599 info->port.flags &= ~ASYNC_CTS_FLOW;
2600
2601 if (cflag & CLOCAL)
2602 info->port.flags &= ~ASYNC_CHECK_CD;
2603 else
2604 info->port.flags |= ASYNC_CHECK_CD;
2605
2606 /* process tty input control flags */
2607
2608 info->read_status_mask = IRQ_RXOVER;
2609 if (I_INPCK(info->port.tty))
2610 info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
2611 if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
2612 info->read_status_mask |= MASK_BREAK;
2613 if (I_IGNPAR(info->port.tty))
2614 info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
2615 if (I_IGNBRK(info->port.tty)) {
2616 info->ignore_status_mask |= MASK_BREAK;
2617 /* If ignoring parity and break indicators, ignore
2618 * overruns too. (For real raw support).
2619 */
2620 if (I_IGNPAR(info->port.tty))
2621 info->ignore_status_mask |= MASK_OVERRUN;
2622 }
2623
2624 program_hw(info);
2625 }
2626
2627 static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount)
2628 {
2629 DBGINFO(("%s get_stats\n", info->device_name));
2630 if (!user_icount) {
2631 memset(&info->icount, 0, sizeof(info->icount));
2632 } else {
2633 if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount)))
2634 return -EFAULT;
2635 }
2636 return 0;
2637 }
2638
2639 static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params)
2640 {
2641 DBGINFO(("%s get_params\n", info->device_name));
2642 if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS)))
2643 return -EFAULT;
2644 return 0;
2645 }
2646
2647 static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params)
2648 {
2649 unsigned long flags;
2650 MGSL_PARAMS tmp_params;
2651
2652 DBGINFO(("%s set_params\n", info->device_name));
2653 if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS)))
2654 return -EFAULT;
2655
2656 spin_lock_irqsave(&info->lock, flags);
2657 if (tmp_params.mode == MGSL_MODE_BASE_CLOCK)
2658 info->base_clock = tmp_params.clock_speed;
2659 else
2660 memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS));
2661 spin_unlock_irqrestore(&info->lock, flags);
2662
2663 program_hw(info);
2664
2665 return 0;
2666 }
2667
2668 static int get_txidle(struct slgt_info *info, int __user *idle_mode)
2669 {
2670 DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode));
2671 if (put_user(info->idle_mode, idle_mode))
2672 return -EFAULT;
2673 return 0;
2674 }
2675
2676 static int set_txidle(struct slgt_info *info, int idle_mode)
2677 {
2678 unsigned long flags;
2679 DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode));
2680 spin_lock_irqsave(&info->lock,flags);
2681 info->idle_mode = idle_mode;
2682 if (info->params.mode != MGSL_MODE_ASYNC)
2683 tx_set_idle(info);
2684 spin_unlock_irqrestore(&info->lock,flags);
2685 return 0;
2686 }
2687
2688 static int tx_enable(struct slgt_info *info, int enable)
2689 {
2690 unsigned long flags;
2691 DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable));
2692 spin_lock_irqsave(&info->lock,flags);
2693 if (enable) {
2694 if (!info->tx_enabled)
2695 tx_start(info);
2696 } else {
2697 if (info->tx_enabled)
2698 tx_stop(info);
2699 }
2700 spin_unlock_irqrestore(&info->lock,flags);
2701 return 0;
2702 }
2703
2704 /*
2705 * abort transmit HDLC frame
2706 */
2707 static int tx_abort(struct slgt_info *info)
2708 {
2709 unsigned long flags;
2710 DBGINFO(("%s tx_abort\n", info->device_name));
2711 spin_lock_irqsave(&info->lock,flags);
2712 tdma_reset(info);
2713 spin_unlock_irqrestore(&info->lock,flags);
2714 return 0;
2715 }
2716
2717 static int rx_enable(struct slgt_info *info, int enable)
2718 {
2719 unsigned long flags;
2720 unsigned int rbuf_fill_level;
2721 DBGINFO(("%s rx_enable(%08x)\n", info->device_name, enable));
2722 spin_lock_irqsave(&info->lock,flags);
2723 /*
2724 * enable[31..16] = receive DMA buffer fill level
2725 * 0 = noop (leave fill level unchanged)
2726 * fill level must be multiple of 4 and <= buffer size
2727 */
2728 rbuf_fill_level = ((unsigned int)enable) >> 16;
2729 if (rbuf_fill_level) {
2730 if ((rbuf_fill_level > DMABUFSIZE) || (rbuf_fill_level % 4)) {
2731 spin_unlock_irqrestore(&info->lock, flags);
2732 return -EINVAL;
2733 }
2734 info->rbuf_fill_level = rbuf_fill_level;
2735 if (rbuf_fill_level < 128)
2736 info->rx_pio = 1; /* PIO mode */
2737 else
2738 info->rx_pio = 0; /* DMA mode */
2739 rx_stop(info); /* restart receiver to use new fill level */
2740 }
2741
2742 /*
2743 * enable[1..0] = receiver enable command
2744 * 0 = disable
2745 * 1 = enable
2746 * 2 = enable or force hunt mode if already enabled
2747 */
2748 enable &= 3;
2749 if (enable) {
2750 if (!info->rx_enabled)
2751 rx_start(info);
2752 else if (enable == 2) {
2753 /* force hunt mode (write 1 to RCR[3]) */
2754 wr_reg16(info, RCR, rd_reg16(info, RCR) | BIT3);
2755 }
2756 } else {
2757 if (info->rx_enabled)
2758 rx_stop(info);
2759 }
2760 spin_unlock_irqrestore(&info->lock,flags);
2761 return 0;
2762 }
2763
2764 /*
2765 * wait for specified event to occur
2766 */
2767 static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr)
2768 {
2769 unsigned long flags;
2770 int s;
2771 int rc=0;
2772 struct mgsl_icount cprev, cnow;
2773 int events;
2774 int mask;
2775 struct _input_signal_events oldsigs, newsigs;
2776 DECLARE_WAITQUEUE(wait, current);
2777
2778 if (get_user(mask, mask_ptr))
2779 return -EFAULT;
2780
2781 DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask));
2782
2783 spin_lock_irqsave(&info->lock,flags);
2784
2785 /* return immediately if state matches requested events */
2786 get_signals(info);
2787 s = info->signals;
2788
2789 events = mask &
2790 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2791 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2792 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2793 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2794 if (events) {
2795 spin_unlock_irqrestore(&info->lock,flags);
2796 goto exit;
2797 }
2798
2799 /* save current irq counts */
2800 cprev = info->icount;
2801 oldsigs = info->input_signal_events;
2802
2803 /* enable hunt and idle irqs if needed */
2804 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
2805 unsigned short val = rd_reg16(info, SCR);
2806 if (!(val & IRQ_RXIDLE))
2807 wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE));
2808 }
2809
2810 set_current_state(TASK_INTERRUPTIBLE);
2811 add_wait_queue(&info->event_wait_q, &wait);
2812
2813 spin_unlock_irqrestore(&info->lock,flags);
2814
2815 for(;;) {
2816 schedule();
2817 if (signal_pending(current)) {
2818 rc = -ERESTARTSYS;
2819 break;
2820 }
2821
2822 /* get current irq counts */
2823 spin_lock_irqsave(&info->lock,flags);
2824 cnow = info->icount;
2825 newsigs = info->input_signal_events;
2826 set_current_state(TASK_INTERRUPTIBLE);
2827 spin_unlock_irqrestore(&info->lock,flags);
2828
2829 /* if no change, wait aborted for some reason */
2830 if (newsigs.dsr_up == oldsigs.dsr_up &&
2831 newsigs.dsr_down == oldsigs.dsr_down &&
2832 newsigs.dcd_up == oldsigs.dcd_up &&
2833 newsigs.dcd_down == oldsigs.dcd_down &&
2834 newsigs.cts_up == oldsigs.cts_up &&
2835 newsigs.cts_down == oldsigs.cts_down &&
2836 newsigs.ri_up == oldsigs.ri_up &&
2837 newsigs.ri_down == oldsigs.ri_down &&
2838 cnow.exithunt == cprev.exithunt &&
2839 cnow.rxidle == cprev.rxidle) {
2840 rc = -EIO;
2841 break;
2842 }
2843
2844 events = mask &
2845 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2846 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2847 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2848 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2849 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2850 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2851 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2852 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2853 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2854 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2855 if (events)
2856 break;
2857
2858 cprev = cnow;
2859 oldsigs = newsigs;
2860 }
2861
2862 remove_wait_queue(&info->event_wait_q, &wait);
2863 set_current_state(TASK_RUNNING);
2864
2865
2866 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2867 spin_lock_irqsave(&info->lock,flags);
2868 if (!waitqueue_active(&info->event_wait_q)) {
2869 /* disable enable exit hunt mode/idle rcvd IRQs */
2870 wr_reg16(info, SCR,
2871 (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE));
2872 }
2873 spin_unlock_irqrestore(&info->lock,flags);
2874 }
2875 exit:
2876 if (rc == 0)
2877 rc = put_user(events, mask_ptr);
2878 return rc;
2879 }
2880
2881 static int get_interface(struct slgt_info *info, int __user *if_mode)
2882 {
2883 DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode));
2884 if (put_user(info->if_mode, if_mode))
2885 return -EFAULT;
2886 return 0;
2887 }
2888
2889 static int set_interface(struct slgt_info *info, int if_mode)
2890 {
2891 unsigned long flags;
2892 unsigned short val;
2893
2894 DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode));
2895 spin_lock_irqsave(&info->lock,flags);
2896 info->if_mode = if_mode;
2897
2898 msc_set_vcr(info);
2899
2900 /* TCR (tx control) 07 1=RTS driver control */
2901 val = rd_reg16(info, TCR);
2902 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
2903 val |= BIT7;
2904 else
2905 val &= ~BIT7;
2906 wr_reg16(info, TCR, val);
2907
2908 spin_unlock_irqrestore(&info->lock,flags);
2909 return 0;
2910 }
2911
2912 static int get_xsync(struct slgt_info *info, int __user *xsync)
2913 {
2914 DBGINFO(("%s get_xsync=%x\n", info->device_name, info->xsync));
2915 if (put_user(info->xsync, xsync))
2916 return -EFAULT;
2917 return 0;
2918 }
2919
2920 /*
2921 * set extended sync pattern (1 to 4 bytes) for extended sync mode
2922 *
2923 * sync pattern is contained in least significant bytes of value
2924 * most significant byte of sync pattern is oldest (1st sent/detected)
2925 */
2926 static int set_xsync(struct slgt_info *info, int xsync)
2927 {
2928 unsigned long flags;
2929
2930 DBGINFO(("%s set_xsync=%x)\n", info->device_name, xsync));
2931 spin_lock_irqsave(&info->lock, flags);
2932 info->xsync = xsync;
2933 wr_reg32(info, XSR, xsync);
2934 spin_unlock_irqrestore(&info->lock, flags);
2935 return 0;
2936 }
2937
2938 static int get_xctrl(struct slgt_info *info, int __user *xctrl)
2939 {
2940 DBGINFO(("%s get_xctrl=%x\n", info->device_name, info->xctrl));
2941 if (put_user(info->xctrl, xctrl))
2942 return -EFAULT;
2943 return 0;
2944 }
2945
2946 /*
2947 * set extended control options
2948 *
2949 * xctrl[31:19] reserved, must be zero
2950 * xctrl[18:17] extended sync pattern length in bytes
2951 * 00 = 1 byte in xsr[7:0]
2952 * 01 = 2 bytes in xsr[15:0]
2953 * 10 = 3 bytes in xsr[23:0]
2954 * 11 = 4 bytes in xsr[31:0]
2955 * xctrl[16] 1 = enable terminal count, 0=disabled
2956 * xctrl[15:0] receive terminal count for fixed length packets
2957 * value is count minus one (0 = 1 byte packet)
2958 * when terminal count is reached, receiver
2959 * automatically returns to hunt mode and receive
2960 * FIFO contents are flushed to DMA buffers with
2961 * end of frame (EOF) status
2962 */
2963 static int set_xctrl(struct slgt_info *info, int xctrl)
2964 {
2965 unsigned long flags;
2966
2967 DBGINFO(("%s set_xctrl=%x)\n", info->device_name, xctrl));
2968 spin_lock_irqsave(&info->lock, flags);
2969 info->xctrl = xctrl;
2970 wr_reg32(info, XCR, xctrl);
2971 spin_unlock_irqrestore(&info->lock, flags);
2972 return 0;
2973 }
2974
2975 /*
2976 * set general purpose IO pin state and direction
2977 *
2978 * user_gpio fields:
2979 * state each bit indicates a pin state
2980 * smask set bit indicates pin state to set
2981 * dir each bit indicates a pin direction (0=input, 1=output)
2982 * dmask set bit indicates pin direction to set
2983 */
2984 static int set_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
2985 {
2986 unsigned long flags;
2987 struct gpio_desc gpio;
2988 __u32 data;
2989
2990 if (!info->gpio_present)
2991 return -EINVAL;
2992 if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
2993 return -EFAULT;
2994 DBGINFO(("%s set_gpio state=%08x smask=%08x dir=%08x dmask=%08x\n",
2995 info->device_name, gpio.state, gpio.smask,
2996 gpio.dir, gpio.dmask));
2997
2998 spin_lock_irqsave(&info->port_array[0]->lock, flags);
2999 if (gpio.dmask) {
3000 data = rd_reg32(info, IODR);
3001 data |= gpio.dmask & gpio.dir;
3002 data &= ~(gpio.dmask & ~gpio.dir);
3003 wr_reg32(info, IODR, data);
3004 }
3005 if (gpio.smask) {
3006 data = rd_reg32(info, IOVR);
3007 data |= gpio.smask & gpio.state;
3008 data &= ~(gpio.smask & ~gpio.state);
3009 wr_reg32(info, IOVR, data);
3010 }
3011 spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
3012
3013 return 0;
3014 }
3015
3016 /*
3017 * get general purpose IO pin state and direction
3018 */
3019 static int get_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
3020 {
3021 struct gpio_desc gpio;
3022 if (!info->gpio_present)
3023 return -EINVAL;
3024 gpio.state = rd_reg32(info, IOVR);
3025 gpio.smask = 0xffffffff;
3026 gpio.dir = rd_reg32(info, IODR);
3027 gpio.dmask = 0xffffffff;
3028 if (copy_to_user(user_gpio, &gpio, sizeof(gpio)))
3029 return -EFAULT;
3030 DBGINFO(("%s get_gpio state=%08x dir=%08x\n",
3031 info->device_name, gpio.state, gpio.dir));
3032 return 0;
3033 }
3034
3035 /*
3036 * conditional wait facility
3037 */
3038 static void init_cond_wait(struct cond_wait *w, unsigned int data)
3039 {
3040 init_waitqueue_head(&w->q);
3041 init_waitqueue_entry(&w->wait, current);
3042 w->data = data;
3043 }
3044
3045 static void add_cond_wait(struct cond_wait **head, struct cond_wait *w)
3046 {
3047 set_current_state(TASK_INTERRUPTIBLE);
3048 add_wait_queue(&w->q, &w->wait);
3049 w->next = *head;
3050 *head = w;
3051 }
3052
3053 static void remove_cond_wait(struct cond_wait **head, struct cond_wait *cw)
3054 {
3055 struct cond_wait *w, *prev;
3056 remove_wait_queue(&cw->q, &cw->wait);
3057 set_current_state(TASK_RUNNING);
3058 for (w = *head, prev = NULL ; w != NULL ; prev = w, w = w->next) {
3059 if (w == cw) {
3060 if (prev != NULL)
3061 prev->next = w->next;
3062 else
3063 *head = w->next;
3064 break;
3065 }
3066 }
3067 }
3068
3069 static void flush_cond_wait(struct cond_wait **head)
3070 {
3071 while (*head != NULL) {
3072 wake_up_interruptible(&(*head)->q);
3073 *head = (*head)->next;
3074 }
3075 }
3076
3077 /*
3078 * wait for general purpose I/O pin(s) to enter specified state
3079 *
3080 * user_gpio fields:
3081 * state - bit indicates target pin state
3082 * smask - set bit indicates watched pin
3083 *
3084 * The wait ends when at least one watched pin enters the specified
3085 * state. When 0 (no error) is returned, user_gpio->state is set to the
3086 * state of all GPIO pins when the wait ends.
3087 *
3088 * Note: Each pin may be a dedicated input, dedicated output, or
3089 * configurable input/output. The number and configuration of pins
3090 * varies with the specific adapter model. Only input pins (dedicated
3091 * or configured) can be monitored with this function.
3092 */
3093 static int wait_gpio(struct slgt_info *info, struct gpio_desc __user *user_gpio)
3094 {
3095 unsigned long flags;
3096 int rc = 0;
3097 struct gpio_desc gpio;
3098 struct cond_wait wait;
3099 u32 state;
3100
3101 if (!info->gpio_present)
3102 return -EINVAL;
3103 if (copy_from_user(&gpio, user_gpio, sizeof(gpio)))
3104 return -EFAULT;
3105 DBGINFO(("%s wait_gpio() state=%08x smask=%08x\n",
3106 info->device_name, gpio.state, gpio.smask));
3107 /* ignore output pins identified by set IODR bit */
3108 if ((gpio.smask &= ~rd_reg32(info, IODR)) == 0)
3109 return -EINVAL;
3110 init_cond_wait(&wait, gpio.smask);
3111
3112 spin_lock_irqsave(&info->port_array[0]->lock, flags);
3113 /* enable interrupts for watched pins */
3114 wr_reg32(info, IOER, rd_reg32(info, IOER) | gpio.smask);
3115 /* get current pin states */
3116 state = rd_reg32(info, IOVR);
3117
3118 if (gpio.smask & ~(state ^ gpio.state)) {
3119 /* already in target state */
3120 gpio.state = state;
3121 } else {
3122 /* wait for target state */
3123 add_cond_wait(&info->gpio_wait_q, &wait);
3124 spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
3125 schedule();
3126 if (signal_pending(current))
3127 rc = -ERESTARTSYS;
3128 else
3129 gpio.state = wait.data;
3130 spin_lock_irqsave(&info->port_array[0]->lock, flags);
3131 remove_cond_wait(&info->gpio_wait_q, &wait);
3132 }
3133
3134 /* disable all GPIO interrupts if no waiting processes */
3135 if (info->gpio_wait_q == NULL)
3136 wr_reg32(info, IOER, 0);
3137 spin_unlock_irqrestore(&info->port_array[0]->lock, flags);
3138
3139 if ((rc == 0) && copy_to_user(user_gpio, &gpio, sizeof(gpio)))
3140 rc = -EFAULT;
3141 return rc;
3142 }
3143
3144 static int modem_input_wait(struct slgt_info *info,int arg)
3145 {
3146 unsigned long flags;
3147 int rc;
3148 struct mgsl_icount cprev, cnow;
3149 DECLARE_WAITQUEUE(wait, current);
3150
3151 /* save current irq counts */
3152 spin_lock_irqsave(&info->lock,flags);
3153 cprev = info->icount;
3154 add_wait_queue(&info->status_event_wait_q, &wait);
3155 set_current_state(TASK_INTERRUPTIBLE);
3156 spin_unlock_irqrestore(&info->lock,flags);
3157
3158 for(;;) {
3159 schedule();
3160 if (signal_pending(current)) {
3161 rc = -ERESTARTSYS;
3162 break;
3163 }
3164
3165 /* get new irq counts */
3166 spin_lock_irqsave(&info->lock,flags);
3167 cnow = info->icount;
3168 set_current_state(TASK_INTERRUPTIBLE);
3169 spin_unlock_irqrestore(&info->lock,flags);
3170
3171 /* if no change, wait aborted for some reason */
3172 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3173 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3174 rc = -EIO;
3175 break;
3176 }
3177
3178 /* check for change in caller specified modem input */
3179 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3180 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3181 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
3182 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3183 rc = 0;
3184 break;
3185 }
3186
3187 cprev = cnow;
3188 }
3189 remove_wait_queue(&info->status_event_wait_q, &wait);
3190 set_current_state(TASK_RUNNING);
3191 return rc;
3192 }
3193
3194 /*
3195 * return state of serial control and status signals
3196 */
3197 static int tiocmget(struct tty_struct *tty)
3198 {
3199 struct slgt_info *info = tty->driver_data;
3200 unsigned int result;
3201 unsigned long flags;
3202
3203 spin_lock_irqsave(&info->lock,flags);
3204 get_signals(info);
3205 spin_unlock_irqrestore(&info->lock,flags);
3206
3207 result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3208 ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3209 ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3210 ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) +
3211 ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3212 ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3213
3214 DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result));
3215 return result;
3216 }
3217
3218 /*
3219 * set modem control signals (DTR/RTS)
3220 *
3221 * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit
3222 * TIOCMSET = set/clear signal values
3223 * value bit mask for command
3224 */
3225 static int tiocmset(struct tty_struct *tty,
3226 unsigned int set, unsigned int clear)
3227 {
3228 struct slgt_info *info = tty->driver_data;
3229 unsigned long flags;
3230
3231 DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear));
3232
3233 if (set & TIOCM_RTS)
3234 info->signals |= SerialSignal_RTS;
3235 if (set & TIOCM_DTR)
3236 info->signals |= SerialSignal_DTR;
3237 if (clear & TIOCM_RTS)
3238 info->signals &= ~SerialSignal_RTS;
3239 if (clear & TIOCM_DTR)
3240 info->signals &= ~SerialSignal_DTR;
3241
3242 spin_lock_irqsave(&info->lock,flags);
3243 set_signals(info);
3244 spin_unlock_irqrestore(&info->lock,flags);
3245 return 0;
3246 }
3247
3248 static int carrier_raised(struct tty_port *port)
3249 {
3250 unsigned long flags;
3251 struct slgt_info *info = container_of(port, struct slgt_info, port);
3252
3253 spin_lock_irqsave(&info->lock,flags);
3254 get_signals(info);
3255 spin_unlock_irqrestore(&info->lock,flags);
3256 return (info->signals & SerialSignal_DCD) ? 1 : 0;
3257 }
3258
3259 static void dtr_rts(struct tty_port *port, int on)
3260 {
3261 unsigned long flags;
3262 struct slgt_info *info = container_of(port, struct slgt_info, port);
3263
3264 spin_lock_irqsave(&info->lock,flags);
3265 if (on)
3266 info->signals |= SerialSignal_RTS + SerialSignal_DTR;
3267 else
3268 info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
3269 set_signals(info);
3270 spin_unlock_irqrestore(&info->lock,flags);
3271 }
3272
3273
3274 /*
3275 * block current process until the device is ready to open
3276 */
3277 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3278 struct slgt_info *info)
3279 {
3280 DECLARE_WAITQUEUE(wait, current);
3281 int retval;
3282 bool do_clocal = false;
3283 bool extra_count = false;
3284 unsigned long flags;
3285 int cd;
3286 struct tty_port *port = &info->port;
3287
3288 DBGINFO(("%s block_til_ready\n", tty->driver->name));
3289
3290 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3291 /* nonblock mode is set or port is not enabled */
3292 port->flags |= ASYNC_NORMAL_ACTIVE;
3293 return 0;
3294 }
3295
3296 if (tty->termios->c_cflag & CLOCAL)
3297 do_clocal = true;
3298
3299 /* Wait for carrier detect and the line to become
3300 * free (i.e., not in use by the callout). While we are in
3301 * this loop, port->count is dropped by one, so that
3302 * close() knows when to free things. We restore it upon
3303 * exit, either normal or abnormal.
3304 */
3305
3306 retval = 0;
3307 add_wait_queue(&port->open_wait, &wait);
3308
3309 spin_lock_irqsave(&info->lock, flags);
3310 if (!tty_hung_up_p(filp)) {
3311 extra_count = true;
3312 port->count--;
3313 }
3314 spin_unlock_irqrestore(&info->lock, flags);
3315 port->blocked_open++;
3316
3317 while (1) {
3318 if ((tty->termios->c_cflag & CBAUD))
3319 tty_port_raise_dtr_rts(port);
3320
3321 set_current_state(TASK_INTERRUPTIBLE);
3322
3323 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
3324 retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3325 -EAGAIN : -ERESTARTSYS;
3326 break;
3327 }
3328
3329 cd = tty_port_carrier_raised(port);
3330
3331 if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd ))
3332 break;
3333
3334 if (signal_pending(current)) {
3335 retval = -ERESTARTSYS;
3336 break;
3337 }
3338
3339 DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
3340 tty_unlock();
3341 schedule();
3342 tty_lock();
3343 }
3344
3345 set_current_state(TASK_RUNNING);
3346 remove_wait_queue(&port->open_wait, &wait);
3347
3348 if (extra_count)
3349 port->count++;
3350 port->blocked_open--;
3351
3352 if (!retval)
3353 port->flags |= ASYNC_NORMAL_ACTIVE;
3354
3355 DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval));
3356 return retval;
3357 }
3358
3359 static int alloc_tmp_rbuf(struct slgt_info *info)
3360 {
3361 info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL);
3362 if (info->tmp_rbuf == NULL)
3363 return -ENOMEM;
3364 return 0;
3365 }
3366
3367 static void free_tmp_rbuf(struct slgt_info *info)
3368 {
3369 kfree(info->tmp_rbuf);
3370 info->tmp_rbuf = NULL;
3371 }
3372
3373 /*
3374 * allocate DMA descriptor lists.
3375 */
3376 static int alloc_desc(struct slgt_info *info)
3377 {
3378 unsigned int i;
3379 unsigned int pbufs;
3380
3381 /* allocate memory to hold descriptor lists */
3382 info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr);
3383 if (info->bufs == NULL)
3384 return -ENOMEM;
3385
3386 memset(info->bufs, 0, DESC_LIST_SIZE);
3387
3388 info->rbufs = (struct slgt_desc*)info->bufs;
3389 info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count;
3390
3391 pbufs = (unsigned int)info->bufs_dma_addr;
3392
3393 /*
3394 * Build circular lists of descriptors
3395 */
3396
3397 for (i=0; i < info->rbuf_count; i++) {
3398 /* physical address of this descriptor */
3399 info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc));
3400
3401 /* physical address of next descriptor */
3402 if (i == info->rbuf_count - 1)
3403 info->rbufs[i].next = cpu_to_le32(pbufs);
3404 else
3405 info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc)));
3406 set_desc_count(info->rbufs[i], DMABUFSIZE);
3407 }
3408
3409 for (i=0; i < info->tbuf_count; i++) {
3410 /* physical address of this descriptor */
3411 info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc));
3412
3413 /* physical address of next descriptor */
3414 if (i == info->tbuf_count - 1)
3415 info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc));
3416 else
3417 info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc)));
3418 }
3419
3420 return 0;
3421 }
3422
3423 static void free_desc(struct slgt_info *info)
3424 {
3425 if (info->bufs != NULL) {
3426 pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr);
3427 info->bufs = NULL;
3428 info->rbufs = NULL;
3429 info->tbufs = NULL;
3430 }
3431 }
3432
3433 static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3434 {
3435 int i;
3436 for (i=0; i < count; i++) {
3437 if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL)
3438 return -ENOMEM;
3439 bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr);
3440 }
3441 return 0;
3442 }
3443
3444 static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count)
3445 {
3446 int i;
3447 for (i=0; i < count; i++) {
3448 if (bufs[i].buf == NULL)
3449 continue;
3450 pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr);
3451 bufs[i].buf = NULL;
3452 }
3453 }
3454
3455 static int alloc_dma_bufs(struct slgt_info *info)
3456 {
3457 info->rbuf_count = 32;
3458 info->tbuf_count = 32;
3459
3460 if (alloc_desc(info) < 0 ||
3461 alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 ||
3462 alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 ||
3463 alloc_tmp_rbuf(info) < 0) {
3464 DBGERR(("%s DMA buffer alloc fail\n", info->device_name));
3465 return -ENOMEM;
3466 }
3467 reset_rbufs(info);
3468 return 0;
3469 }
3470
3471 static void free_dma_bufs(struct slgt_info *info)
3472 {
3473 if (info->bufs) {
3474 free_bufs(info, info->rbufs, info->rbuf_count);
3475 free_bufs(info, info->tbufs, info->tbuf_count);
3476 free_desc(info);
3477 }
3478 free_tmp_rbuf(info);
3479 }
3480
3481 static int claim_resources(struct slgt_info *info)
3482 {
3483 if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) {
3484 DBGERR(("%s reg addr conflict, addr=%08X\n",
3485 info->device_name, info->phys_reg_addr));
3486 info->init_error = DiagStatus_AddressConflict;
3487 goto errout;
3488 }
3489 else
3490 info->reg_addr_requested = true;
3491
3492 info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE);
3493 if (!info->reg_addr) {
3494 DBGERR(("%s can't map device registers, addr=%08X\n",
3495 info->device_name, info->phys_reg_addr));
3496 info->init_error = DiagStatus_CantAssignPciResources;
3497 goto errout;
3498 }
3499 return 0;
3500
3501 errout:
3502 release_resources(info);
3503 return -ENODEV;
3504 }
3505
3506 static void release_resources(struct slgt_info *info)
3507 {
3508 if (info->irq_requested) {
3509 free_irq(info->irq_level, info);
3510 info->irq_requested = false;
3511 }
3512
3513 if (info->reg_addr_requested) {
3514 release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE);
3515 info->reg_addr_requested = false;
3516 }
3517
3518 if (info->reg_addr) {
3519 iounmap(info->reg_addr);
3520 info->reg_addr = NULL;
3521 }
3522 }
3523
3524 /* Add the specified device instance data structure to the
3525 * global linked list of devices and increment the device count.
3526 */
3527 static void add_device(struct slgt_info *info)
3528 {
3529 char *devstr;
3530
3531 info->next_device = NULL;
3532 info->line = slgt_device_count;
3533 sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line);
3534
3535 if (info->line < MAX_DEVICES) {
3536 if (maxframe[info->line])
3537 info->max_frame_size = maxframe[info->line];
3538 }
3539
3540 slgt_device_count++;
3541
3542 if (!slgt_device_list)
3543 slgt_device_list = info;
3544 else {
3545 struct slgt_info *current_dev = slgt_device_list;
3546 while(current_dev->next_device)
3547 current_dev = current_dev->next_device;
3548 current_dev->next_device = info;
3549 }
3550
3551 if (info->max_frame_size < 4096)
3552 info->max_frame_size = 4096;
3553 else if (info->max_frame_size > 65535)
3554 info->max_frame_size = 65535;
3555
3556 switch(info->pdev->device) {
3557 case SYNCLINK_GT_DEVICE_ID:
3558 devstr = "GT";
3559 break;
3560 case SYNCLINK_GT2_DEVICE_ID:
3561 devstr = "GT2";
3562 break;
3563 case SYNCLINK_GT4_DEVICE_ID:
3564 devstr = "GT4";
3565 break;
3566 case SYNCLINK_AC_DEVICE_ID:
3567 devstr = "AC";
3568 info->params.mode = MGSL_MODE_ASYNC;
3569 break;
3570 default:
3571 devstr = "(unknown model)";
3572 }
3573 printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n",
3574 devstr, info->device_name, info->phys_reg_addr,
3575 info->irq_level, info->max_frame_size);
3576
3577 #if SYNCLINK_GENERIC_HDLC
3578 hdlcdev_init(info);
3579 #endif
3580 }
3581
3582 static const struct tty_port_operations slgt_port_ops = {
3583 .carrier_raised = carrier_raised,
3584 .dtr_rts = dtr_rts,
3585 };
3586
3587 /*
3588 * allocate device instance structure, return NULL on failure
3589 */
3590 static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3591 {
3592 struct slgt_info *info;
3593
3594 info = kzalloc(sizeof(struct slgt_info), GFP_KERNEL);
3595
3596 if (!info) {
3597 DBGERR(("%s device alloc failed adapter=%d port=%d\n",
3598 driver_name, adapter_num, port_num));
3599 } else {
3600 tty_port_init(&info->port);
3601 info->port.ops = &slgt_port_ops;
3602 info->magic = MGSL_MAGIC;
3603 INIT_WORK(&info->task, bh_handler);
3604 info->max_frame_size = 4096;
3605 info->base_clock = 14745600;
3606 info->rbuf_fill_level = DMABUFSIZE;
3607 info->port.close_delay = 5*HZ/10;
3608 info->port.closing_wait = 30*HZ;
3609 init_waitqueue_head(&info->status_event_wait_q);
3610 init_waitqueue_head(&info->event_wait_q);
3611 spin_lock_init(&info->netlock);
3612 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3613 info->idle_mode = HDLC_TXIDLE_FLAGS;
3614 info->adapter_num = adapter_num;
3615 info->port_num = port_num;
3616
3617 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3618 setup_timer(&info->rx_timer, rx_timeout, (unsigned long)info);
3619
3620 /* Copy configuration info to device instance data */
3621 info->pdev = pdev;
3622 info->irq_level = pdev->irq;
3623 info->phys_reg_addr = pci_resource_start(pdev,0);
3624
3625 info->bus_type = MGSL_BUS_TYPE_PCI;
3626 info->irq_flags = IRQF_SHARED;
3627
3628 info->init_error = -1; /* assume error, set to 0 on successful init */
3629 }
3630
3631 return info;
3632 }
3633
3634 static void device_init(int adapter_num, struct pci_dev *pdev)
3635 {
3636 struct slgt_info *port_array[SLGT_MAX_PORTS];
3637 int i;
3638 int port_count = 1;
3639
3640 if (pdev->device == SYNCLINK_GT2_DEVICE_ID)
3641 port_count = 2;
3642 else if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
3643 port_count = 4;
3644
3645 /* allocate device instances for all ports */
3646 for (i=0; i < port_count; ++i) {
3647 port_array[i] = alloc_dev(adapter_num, i, pdev);
3648 if (port_array[i] == NULL) {
3649 for (--i; i >= 0; --i)
3650 kfree(port_array[i]);
3651 return;
3652 }
3653 }
3654
3655 /* give copy of port_array to all ports and add to device list */
3656 for (i=0; i < port_count; ++i) {
3657 memcpy(port_array[i]->port_array, port_array, sizeof(port_array));
3658 add_device(port_array[i]);
3659 port_array[i]->port_count = port_count;
3660 spin_lock_init(&port_array[i]->lock);
3661 }
3662
3663 /* Allocate and claim adapter resources */
3664 if (!claim_resources(port_array[0])) {
3665
3666 alloc_dma_bufs(port_array[0]);
3667
3668 /* copy resource information from first port to others */
3669 for (i = 1; i < port_count; ++i) {
3670 port_array[i]->irq_level = port_array[0]->irq_level;
3671 port_array[i]->reg_addr = port_array[0]->reg_addr;
3672 alloc_dma_bufs(port_array[i]);
3673 }
3674
3675 if (request_irq(port_array[0]->irq_level,
3676 slgt_interrupt,
3677 port_array[0]->irq_flags,
3678 port_array[0]->device_name,
3679 port_array[0]) < 0) {
3680 DBGERR(("%s request_irq failed IRQ=%d\n",
3681 port_array[0]->device_name,
3682 port_array[0]->irq_level));
3683 } else {
3684 port_array[0]->irq_requested = true;
3685 adapter_test(port_array[0]);
3686 for (i=1 ; i < port_count ; i++) {
3687 port_array[i]->init_error = port_array[0]->init_error;
3688 port_array[i]->gpio_present = port_array[0]->gpio_present;
3689 }
3690 }
3691 }
3692
3693 for (i=0; i < port_count; ++i)
3694 tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev));
3695 }
3696
3697 static int __devinit init_one(struct pci_dev *dev,
3698 const struct pci_device_id *ent)
3699 {
3700 if (pci_enable_device(dev)) {
3701 printk("error enabling pci device %p\n", dev);
3702 return -EIO;
3703 }
3704 pci_set_master(dev);
3705 device_init(slgt_device_count, dev);
3706 return 0;
3707 }
3708
3709 static void __devexit remove_one(struct pci_dev *dev)
3710 {
3711 }
3712
3713 static const struct tty_operations ops = {
3714 .open = open,
3715 .close = close,
3716 .write = write,
3717 .put_char = put_char,
3718 .flush_chars = flush_chars,
3719 .write_room = write_room,
3720 .chars_in_buffer = chars_in_buffer,
3721 .flush_buffer = flush_buffer,
3722 .ioctl = ioctl,
3723 .compat_ioctl = slgt_compat_ioctl,
3724 .throttle = throttle,
3725 .unthrottle = unthrottle,
3726 .send_xchar = send_xchar,
3727 .break_ctl = set_break,
3728 .wait_until_sent = wait_until_sent,
3729 .set_termios = set_termios,
3730 .stop = tx_hold,
3731 .start = tx_release,
3732 .hangup = hangup,
3733 .tiocmget = tiocmget,
3734 .tiocmset = tiocmset,
3735 .get_icount = get_icount,
3736 .proc_fops = &synclink_gt_proc_fops,
3737 };
3738
3739 static void slgt_cleanup(void)
3740 {
3741 int rc;
3742 struct slgt_info *info;
3743 struct slgt_info *tmp;
3744
3745 printk(KERN_INFO "unload %s\n", driver_name);
3746
3747 if (serial_driver) {
3748 for (info=slgt_device_list ; info != NULL ; info=info->next_device)
3749 tty_unregister_device(serial_driver, info->line);
3750 if ((rc = tty_unregister_driver(serial_driver)))
3751 DBGERR(("tty_unregister_driver error=%d\n", rc));
3752 put_tty_driver(serial_driver);
3753 }
3754
3755 /* reset devices */
3756 info = slgt_device_list;
3757 while(info) {
3758 reset_port(info);
3759 info = info->next_device;
3760 }
3761
3762 /* release devices */
3763 info = slgt_device_list;
3764 while(info) {
3765 #if SYNCLINK_GENERIC_HDLC
3766 hdlcdev_exit(info);
3767 #endif
3768 free_dma_bufs(info);
3769 free_tmp_rbuf(info);
3770 if (info->port_num == 0)
3771 release_resources(info);
3772 tmp = info;
3773 info = info->next_device;
3774 kfree(tmp);
3775 }
3776
3777 if (pci_registered)
3778 pci_unregister_driver(&pci_driver);
3779 }
3780
3781 /*
3782 * Driver initialization entry point.
3783 */
3784 static int __init slgt_init(void)
3785 {
3786 int rc;
3787
3788 printk(KERN_INFO "%s\n", driver_name);
3789
3790 serial_driver = alloc_tty_driver(MAX_DEVICES);
3791 if (!serial_driver) {
3792 printk("%s can't allocate tty driver\n", driver_name);
3793 return -ENOMEM;
3794 }
3795
3796 /* Initialize the tty_driver structure */
3797
3798 serial_driver->owner = THIS_MODULE;
3799 serial_driver->driver_name = tty_driver_name;
3800 serial_driver->name = tty_dev_prefix;
3801 serial_driver->major = ttymajor;
3802 serial_driver->minor_start = 64;
3803 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3804 serial_driver->subtype = SERIAL_TYPE_NORMAL;
3805 serial_driver->init_termios = tty_std_termios;
3806 serial_driver->init_termios.c_cflag =
3807 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3808 serial_driver->init_termios.c_ispeed = 9600;
3809 serial_driver->init_termios.c_ospeed = 9600;
3810 serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
3811 tty_set_operations(serial_driver, &ops);
3812 if ((rc = tty_register_driver(serial_driver)) < 0) {
3813 DBGERR(("%s can't register serial driver\n", driver_name));
3814 put_tty_driver(serial_driver);
3815 serial_driver = NULL;
3816 goto error;
3817 }
3818
3819 printk(KERN_INFO "%s, tty major#%d\n",
3820 driver_name, serial_driver->major);
3821
3822 slgt_device_count = 0;
3823 if ((rc = pci_register_driver(&pci_driver)) < 0) {
3824 printk("%s pci_register_driver error=%d\n", driver_name, rc);
3825 goto error;
3826 }
3827 pci_registered = true;
3828
3829 if (!slgt_device_list)
3830 printk("%s no devices found\n",driver_name);
3831
3832 return 0;
3833
3834 error:
3835 slgt_cleanup();
3836 return rc;
3837 }
3838
3839 static void __exit slgt_exit(void)
3840 {
3841 slgt_cleanup();
3842 }
3843
3844 module_init(slgt_init);
3845 module_exit(slgt_exit);
3846
3847 /*
3848 * register access routines
3849 */
3850
3851 #define CALC_REGADDR() \
3852 unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \
3853 if (addr >= 0x80) \
3854 reg_addr += (info->port_num) * 32; \
3855 else if (addr >= 0x40) \
3856 reg_addr += (info->port_num) * 16;
3857
3858 static __u8 rd_reg8(struct slgt_info *info, unsigned int addr)
3859 {
3860 CALC_REGADDR();
3861 return readb((void __iomem *)reg_addr);
3862 }
3863
3864 static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value)
3865 {
3866 CALC_REGADDR();
3867 writeb(value, (void __iomem *)reg_addr);
3868 }
3869
3870 static __u16 rd_reg16(struct slgt_info *info, unsigned int addr)
3871 {
3872 CALC_REGADDR();
3873 return readw((void __iomem *)reg_addr);
3874 }
3875
3876 static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value)
3877 {
3878 CALC_REGADDR();
3879 writew(value, (void __iomem *)reg_addr);
3880 }
3881
3882 static __u32 rd_reg32(struct slgt_info *info, unsigned int addr)
3883 {
3884 CALC_REGADDR();
3885 return readl((void __iomem *)reg_addr);
3886 }
3887
3888 static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value)
3889 {
3890 CALC_REGADDR();
3891 writel(value, (void __iomem *)reg_addr);
3892 }
3893
3894 static void rdma_reset(struct slgt_info *info)
3895 {
3896 unsigned int i;
3897
3898 /* set reset bit */
3899 wr_reg32(info, RDCSR, BIT1);
3900
3901 /* wait for enable bit cleared */
3902 for(i=0 ; i < 1000 ; i++)
3903 if (!(rd_reg32(info, RDCSR) & BIT0))
3904 break;
3905 }
3906
3907 static void tdma_reset(struct slgt_info *info)
3908 {
3909 unsigned int i;
3910
3911 /* set reset bit */
3912 wr_reg32(info, TDCSR, BIT1);
3913
3914 /* wait for enable bit cleared */
3915 for(i=0 ; i < 1000 ; i++)
3916 if (!(rd_reg32(info, TDCSR) & BIT0))
3917 break;
3918 }
3919
3920 /*
3921 * enable internal loopback
3922 * TxCLK and RxCLK are generated from BRG
3923 * and TxD is looped back to RxD internally.
3924 */
3925 static void enable_loopback(struct slgt_info *info)
3926 {
3927 /* SCR (serial control) BIT2=looopback enable */
3928 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2));
3929
3930 if (info->params.mode != MGSL_MODE_ASYNC) {
3931 /* CCR (clock control)
3932 * 07..05 tx clock source (010 = BRG)
3933 * 04..02 rx clock source (010 = BRG)
3934 * 01 auxclk enable (0 = disable)
3935 * 00 BRG enable (1 = enable)
3936 *
3937 * 0100 1001
3938 */
3939 wr_reg8(info, CCR, 0x49);
3940
3941 /* set speed if available, otherwise use default */
3942 if (info->params.clock_speed)
3943 set_rate(info, info->params.clock_speed);
3944 else
3945 set_rate(info, 3686400);
3946 }
3947 }
3948
3949 /*
3950 * set baud rate generator to specified rate
3951 */
3952 static void set_rate(struct slgt_info *info, u32 rate)
3953 {
3954 unsigned int div;
3955 unsigned int osc = info->base_clock;
3956
3957 /* div = osc/rate - 1
3958 *
3959 * Round div up if osc/rate is not integer to
3960 * force to next slowest rate.
3961 */
3962
3963 if (rate) {
3964 div = osc/rate;
3965 if (!(osc % rate) && div)
3966 div--;
3967 wr_reg16(info, BDR, (unsigned short)div);
3968 }
3969 }
3970
3971 static void rx_stop(struct slgt_info *info)
3972 {
3973 unsigned short val;
3974
3975 /* disable and reset receiver */
3976 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
3977 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
3978 wr_reg16(info, RCR, val); /* clear reset bit */
3979
3980 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE);
3981
3982 /* clear pending rx interrupts */
3983 wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER);
3984
3985 rdma_reset(info);
3986
3987 info->rx_enabled = false;
3988 info->rx_restart = false;
3989 }
3990
3991 static void rx_start(struct slgt_info *info)
3992 {
3993 unsigned short val;
3994
3995 slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA);
3996
3997 /* clear pending rx overrun IRQ */
3998 wr_reg16(info, SSR, IRQ_RXOVER);
3999
4000 /* reset and disable receiver */
4001 val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */
4002 wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */
4003 wr_reg16(info, RCR, val); /* clear reset bit */
4004
4005 rdma_reset(info);
4006 reset_rbufs(info);
4007
4008 if (info->rx_pio) {
4009 /* rx request when rx FIFO not empty */
4010 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14));
4011 slgt_irq_on(info, IRQ_RXDATA);
4012 if (info->params.mode == MGSL_MODE_ASYNC) {
4013 /* enable saving of rx status */
4014 wr_reg32(info, RDCSR, BIT6);
4015 }
4016 } else {
4017 /* rx request when rx FIFO half full */
4018 wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14));
4019 /* set 1st descriptor address */
4020 wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
4021
4022 if (info->params.mode != MGSL_MODE_ASYNC) {
4023 /* enable rx DMA and DMA interrupt */
4024 wr_reg32(info, RDCSR, (BIT2 + BIT0));
4025 } else {
4026 /* enable saving of rx status, rx DMA and DMA interrupt */
4027 wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
4028 }
4029 }
4030
4031 slgt_irq_on(info, IRQ_RXOVER);
4032
4033 /* enable receiver */
4034 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1));
4035
4036 info->rx_restart = false;
4037 info->rx_enabled = true;
4038 }
4039
4040 static void tx_start(struct slgt_info *info)
4041 {
4042 if (!info->tx_enabled) {
4043 wr_reg16(info, TCR,
4044 (unsigned short)((rd_reg16(info, TCR) | BIT1) & ~BIT2));
4045 info->tx_enabled = true;
4046 }
4047
4048 if (desc_count(info->tbufs[info->tbuf_start])) {
4049 info->drop_rts_on_tx_done = false;
4050
4051 if (info->params.mode != MGSL_MODE_ASYNC) {
4052 if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
4053 get_signals(info);
4054 if (!(info->signals & SerialSignal_RTS)) {
4055 info->signals |= SerialSignal_RTS;
4056 set_signals(info);
4057 info->drop_rts_on_tx_done = true;
4058 }
4059 }
4060
4061 slgt_irq_off(info, IRQ_TXDATA);
4062 slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE);
4063 /* clear tx idle and underrun status bits */
4064 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
4065 } else {
4066 slgt_irq_off(info, IRQ_TXDATA);
4067 slgt_irq_on(info, IRQ_TXIDLE);
4068 /* clear tx idle status bit */
4069 wr_reg16(info, SSR, IRQ_TXIDLE);
4070 }
4071 /* set 1st descriptor address and start DMA */
4072 wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc);
4073 wr_reg32(info, TDCSR, BIT2 + BIT0);
4074 info->tx_active = true;
4075 }
4076 }
4077
4078 static void tx_stop(struct slgt_info *info)
4079 {
4080 unsigned short val;
4081
4082 del_timer(&info->tx_timer);
4083
4084 tdma_reset(info);
4085
4086 /* reset and disable transmitter */
4087 val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */
4088 wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */
4089
4090 slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER);
4091
4092 /* clear tx idle and underrun status bit */
4093 wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER));
4094
4095 reset_tbufs(info);
4096
4097 info->tx_enabled = false;
4098 info->tx_active = false;
4099 }
4100
4101 static void reset_port(struct slgt_info *info)
4102 {
4103 if (!info->reg_addr)
4104 return;
4105
4106 tx_stop(info);
4107 rx_stop(info);
4108
4109 info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
4110 set_signals(info);
4111
4112 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4113 }
4114
4115 static void reset_adapter(struct slgt_info *info)
4116 {
4117 int i;
4118 for (i=0; i < info->port_count; ++i) {
4119 if (info->port_array[i])
4120 reset_port(info->port_array[i]);
4121 }
4122 }
4123
4124 static void async_mode(struct slgt_info *info)
4125 {
4126 unsigned short val;
4127
4128 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4129 tx_stop(info);
4130 rx_stop(info);
4131
4132 /* TCR (tx control)
4133 *
4134 * 15..13 mode, 010=async
4135 * 12..10 encoding, 000=NRZ
4136 * 09 parity enable
4137 * 08 1=odd parity, 0=even parity
4138 * 07 1=RTS driver control
4139 * 06 1=break enable
4140 * 05..04 character length
4141 * 00=5 bits
4142 * 01=6 bits
4143 * 10=7 bits
4144 * 11=8 bits
4145 * 03 0=1 stop bit, 1=2 stop bits
4146 * 02 reset
4147 * 01 enable
4148 * 00 auto-CTS enable
4149 */
4150 val = 0x4000;
4151
4152 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4153 val |= BIT7;
4154
4155 if (info->params.parity != ASYNC_PARITY_NONE) {
4156 val |= BIT9;
4157 if (info->params.parity == ASYNC_PARITY_ODD)
4158 val |= BIT8;
4159 }
4160
4161 switch (info->params.data_bits)
4162 {
4163 case 6: val |= BIT4; break;
4164 case 7: val |= BIT5; break;
4165 case 8: val |= BIT5 + BIT4; break;
4166 }
4167
4168 if (info->params.stop_bits != 1)
4169 val |= BIT3;
4170
4171 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4172 val |= BIT0;
4173
4174 wr_reg16(info, TCR, val);
4175
4176 /* RCR (rx control)
4177 *
4178 * 15..13 mode, 010=async
4179 * 12..10 encoding, 000=NRZ
4180 * 09 parity enable
4181 * 08 1=odd parity, 0=even parity
4182 * 07..06 reserved, must be 0
4183 * 05..04 character length
4184 * 00=5 bits
4185 * 01=6 bits
4186 * 10=7 bits
4187 * 11=8 bits
4188 * 03 reserved, must be zero
4189 * 02 reset
4190 * 01 enable
4191 * 00 auto-DCD enable
4192 */
4193 val = 0x4000;
4194
4195 if (info->params.parity != ASYNC_PARITY_NONE) {
4196 val |= BIT9;
4197 if (info->params.parity == ASYNC_PARITY_ODD)
4198 val |= BIT8;
4199 }
4200
4201 switch (info->params.data_bits)
4202 {
4203 case 6: val |= BIT4; break;
4204 case 7: val |= BIT5; break;
4205 case 8: val |= BIT5 + BIT4; break;
4206 }
4207
4208 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4209 val |= BIT0;
4210
4211 wr_reg16(info, RCR, val);
4212
4213 /* CCR (clock control)
4214 *
4215 * 07..05 011 = tx clock source is BRG/16
4216 * 04..02 010 = rx clock source is BRG
4217 * 01 0 = auxclk disabled
4218 * 00 1 = BRG enabled
4219 *
4220 * 0110 1001
4221 */
4222 wr_reg8(info, CCR, 0x69);
4223
4224 msc_set_vcr(info);
4225
4226 /* SCR (serial control)
4227 *
4228 * 15 1=tx req on FIFO half empty
4229 * 14 1=rx req on FIFO half full
4230 * 13 tx data IRQ enable
4231 * 12 tx idle IRQ enable
4232 * 11 rx break on IRQ enable
4233 * 10 rx data IRQ enable
4234 * 09 rx break off IRQ enable
4235 * 08 overrun IRQ enable
4236 * 07 DSR IRQ enable
4237 * 06 CTS IRQ enable
4238 * 05 DCD IRQ enable
4239 * 04 RI IRQ enable
4240 * 03 0=16x sampling, 1=8x sampling
4241 * 02 1=txd->rxd internal loopback enable
4242 * 01 reserved, must be zero
4243 * 00 1=master IRQ enable
4244 */
4245 val = BIT15 + BIT14 + BIT0;
4246 /* JCR[8] : 1 = x8 async mode feature available */
4247 if ((rd_reg32(info, JCR) & BIT8) && info->params.data_rate &&
4248 ((info->base_clock < (info->params.data_rate * 16)) ||
4249 (info->base_clock % (info->params.data_rate * 16)))) {
4250 /* use 8x sampling */
4251 val |= BIT3;
4252 set_rate(info, info->params.data_rate * 8);
4253 } else {
4254 /* use 16x sampling */
4255 set_rate(info, info->params.data_rate * 16);
4256 }
4257 wr_reg16(info, SCR, val);
4258
4259 slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER);
4260
4261 if (info->params.loopback)
4262 enable_loopback(info);
4263 }
4264
4265 static void sync_mode(struct slgt_info *info)
4266 {
4267 unsigned short val;
4268
4269 slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
4270 tx_stop(info);
4271 rx_stop(info);
4272
4273 /* TCR (tx control)
4274 *
4275 * 15..13 mode
4276 * 000=HDLC/SDLC
4277 * 001=raw bit synchronous
4278 * 010=asynchronous/isochronous
4279 * 011=monosync byte synchronous
4280 * 100=bisync byte synchronous
4281 * 101=xsync byte synchronous
4282 * 12..10 encoding
4283 * 09 CRC enable
4284 * 08 CRC32
4285 * 07 1=RTS driver control
4286 * 06 preamble enable
4287 * 05..04 preamble length
4288 * 03 share open/close flag
4289 * 02 reset
4290 * 01 enable
4291 * 00 auto-CTS enable
4292 */
4293 val = BIT2;
4294
4295 switch(info->params.mode) {
4296 case MGSL_MODE_XSYNC:
4297 val |= BIT15 + BIT13;
4298 break;
4299 case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4300 case MGSL_MODE_BISYNC: val |= BIT15; break;
4301 case MGSL_MODE_RAW: val |= BIT13; break;
4302 }
4303 if (info->if_mode & MGSL_INTERFACE_RTS_EN)
4304 val |= BIT7;
4305
4306 switch(info->params.encoding)
4307 {
4308 case HDLC_ENCODING_NRZB: val |= BIT10; break;
4309 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
4310 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
4311 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
4312 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4313 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4314 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4315 }
4316
4317 switch (info->params.crc_type & HDLC_CRC_MASK)
4318 {
4319 case HDLC_CRC_16_CCITT: val |= BIT9; break;
4320 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4321 }
4322
4323 if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
4324 val |= BIT6;
4325
4326 switch (info->params.preamble_length)
4327 {
4328 case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break;
4329 case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break;
4330 case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break;
4331 }
4332
4333 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4334 val |= BIT0;
4335
4336 wr_reg16(info, TCR, val);
4337
4338 /* TPR (transmit preamble) */
4339
4340 switch (info->params.preamble)
4341 {
4342 case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
4343 case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
4344 case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break;
4345 case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break;
4346 case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break;
4347 default: val = 0x7e; break;
4348 }
4349 wr_reg8(info, TPR, (unsigned char)val);
4350
4351 /* RCR (rx control)
4352 *
4353 * 15..13 mode
4354 * 000=HDLC/SDLC
4355 * 001=raw bit synchronous
4356 * 010=asynchronous/isochronous
4357 * 011=monosync byte synchronous
4358 * 100=bisync byte synchronous
4359 * 101=xsync byte synchronous
4360 * 12..10 encoding
4361 * 09 CRC enable
4362 * 08 CRC32
4363 * 07..03 reserved, must be 0
4364 * 02 reset
4365 * 01 enable
4366 * 00 auto-DCD enable
4367 */
4368 val = 0;
4369
4370 switch(info->params.mode) {
4371 case MGSL_MODE_XSYNC:
4372 val |= BIT15 + BIT13;
4373 break;
4374 case MGSL_MODE_MONOSYNC: val |= BIT14 + BIT13; break;
4375 case MGSL_MODE_BISYNC: val |= BIT15; break;
4376 case MGSL_MODE_RAW: val |= BIT13; break;
4377 }
4378
4379 switch(info->params.encoding)
4380 {
4381 case HDLC_ENCODING_NRZB: val |= BIT10; break;
4382 case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break;
4383 case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break;
4384 case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break;
4385 case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break;
4386 case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break;
4387 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
4388 }
4389
4390 switch (info->params.crc_type & HDLC_CRC_MASK)
4391 {
4392 case HDLC_CRC_16_CCITT: val |= BIT9; break;
4393 case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
4394 }
4395
4396 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4397 val |= BIT0;
4398
4399 wr_reg16(info, RCR, val);
4400
4401 /* CCR (clock control)
4402 *
4403 * 07..05 tx clock source
4404 * 04..02 rx clock source
4405 * 01 auxclk enable
4406 * 00 BRG enable
4407 */
4408 val = 0;
4409
4410 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4411 {
4412 // when RxC source is DPLL, BRG generates 16X DPLL
4413 // reference clock, so take TxC from BRG/16 to get
4414 // transmit clock at actual data rate
4415 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4416 val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */
4417 else
4418 val |= BIT6; /* 010, txclk = BRG */
4419 }
4420 else if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4421 val |= BIT7; /* 100, txclk = DPLL Input */
4422 else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4423 val |= BIT5; /* 001, txclk = RXC Input */
4424
4425 if (info->params.flags & HDLC_FLAG_RXC_BRG)
4426 val |= BIT3; /* 010, rxclk = BRG */
4427 else if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4428 val |= BIT4; /* 100, rxclk = DPLL */
4429 else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4430 val |= BIT2; /* 001, rxclk = TXC Input */
4431
4432 if (info->params.clock_speed)
4433 val |= BIT1 + BIT0;
4434
4435 wr_reg8(info, CCR, (unsigned char)val);
4436
4437 if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL))
4438 {
4439 // program DPLL mode
4440 switch(info->params.encoding)
4441 {
4442 case HDLC_ENCODING_BIPHASE_MARK:
4443 case HDLC_ENCODING_BIPHASE_SPACE:
4444 val = BIT7; break;
4445 case HDLC_ENCODING_BIPHASE_LEVEL:
4446 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:
4447 val = BIT7 + BIT6; break;
4448 default: val = BIT6; // NRZ encodings
4449 }
4450 wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val));
4451
4452 // DPLL requires a 16X reference clock from BRG
4453 set_rate(info, info->params.clock_speed * 16);
4454 }
4455 else
4456 set_rate(info, info->params.clock_speed);
4457
4458 tx_set_idle(info);
4459
4460 msc_set_vcr(info);
4461
4462 /* SCR (serial control)
4463 *
4464 * 15 1=tx req on FIFO half empty
4465 * 14 1=rx req on FIFO half full
4466 * 13 tx data IRQ enable
4467 * 12 tx idle IRQ enable
4468 * 11 underrun IRQ enable
4469 * 10 rx data IRQ enable
4470 * 09 rx idle IRQ enable
4471 * 08 overrun IRQ enable
4472 * 07 DSR IRQ enable
4473 * 06 CTS IRQ enable
4474 * 05 DCD IRQ enable
4475 * 04 RI IRQ enable
4476 * 03 reserved, must be zero
4477 * 02 1=txd->rxd internal loopback enable
4478 * 01 reserved, must be zero
4479 * 00 1=master IRQ enable
4480 */
4481 wr_reg16(info, SCR, BIT15 + BIT14 + BIT0);
4482
4483 if (info->params.loopback)
4484 enable_loopback(info);
4485 }
4486
4487 /*
4488 * set transmit idle mode
4489 */
4490 static void tx_set_idle(struct slgt_info *info)
4491 {
4492 unsigned char val;
4493 unsigned short tcr;
4494
4495 /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits
4496 * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits
4497 */
4498 tcr = rd_reg16(info, TCR);
4499 if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) {
4500 /* disable preamble, set idle size to 16 bits */
4501 tcr = (tcr & ~(BIT6 + BIT5)) | BIT4;
4502 /* MSB of 16 bit idle specified in tx preamble register (TPR) */
4503 wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff));
4504 } else if (!(tcr & BIT6)) {
4505 /* preamble is disabled, set idle size to 8 bits */
4506 tcr &= ~(BIT5 + BIT4);
4507 }
4508 wr_reg16(info, TCR, tcr);
4509
4510 if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) {
4511 /* LSB of custom tx idle specified in tx idle register */
4512 val = (unsigned char)(info->idle_mode & 0xff);
4513 } else {
4514 /* standard 8 bit idle patterns */
4515 switch(info->idle_mode)
4516 {
4517 case HDLC_TXIDLE_FLAGS: val = 0x7e; break;
4518 case HDLC_TXIDLE_ALT_ZEROS_ONES:
4519 case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
4520 case HDLC_TXIDLE_ZEROS:
4521 case HDLC_TXIDLE_SPACE: val = 0x00; break;
4522 default: val = 0xff;
4523 }
4524 }
4525
4526 wr_reg8(info, TIR, val);
4527 }
4528
4529 /*
4530 * get state of V24 status (input) signals
4531 */
4532 static void get_signals(struct slgt_info *info)
4533 {
4534 unsigned short status = rd_reg16(info, SSR);
4535
4536 /* clear all serial signals except DTR and RTS */
4537 info->signals &= SerialSignal_DTR + SerialSignal_RTS;
4538
4539 if (status & BIT3)
4540 info->signals |= SerialSignal_DSR;
4541 if (status & BIT2)
4542 info->signals |= SerialSignal_CTS;
4543 if (status & BIT1)
4544 info->signals |= SerialSignal_DCD;
4545 if (status & BIT0)
4546 info->signals |= SerialSignal_RI;
4547 }
4548
4549 /*
4550 * set V.24 Control Register based on current configuration
4551 */
4552 static void msc_set_vcr(struct slgt_info *info)
4553 {
4554 unsigned char val = 0;
4555
4556 /* VCR (V.24 control)
4557 *
4558 * 07..04 serial IF select
4559 * 03 DTR
4560 * 02 RTS
4561 * 01 LL
4562 * 00 RL
4563 */
4564
4565 switch(info->if_mode & MGSL_INTERFACE_MASK)
4566 {
4567 case MGSL_INTERFACE_RS232:
4568 val |= BIT5; /* 0010 */
4569 break;
4570 case MGSL_INTERFACE_V35:
4571 val |= BIT7 + BIT6 + BIT5; /* 1110 */
4572 break;
4573 case MGSL_INTERFACE_RS422:
4574 val |= BIT6; /* 0100 */
4575 break;
4576 }
4577
4578 if (info->if_mode & MGSL_INTERFACE_MSB_FIRST)
4579 val |= BIT4;
4580 if (info->signals & SerialSignal_DTR)
4581 val |= BIT3;
4582 if (info->signals & SerialSignal_RTS)
4583 val |= BIT2;
4584 if (info->if_mode & MGSL_INTERFACE_LL)
4585 val |= BIT1;
4586 if (info->if_mode & MGSL_INTERFACE_RL)
4587 val |= BIT0;
4588 wr_reg8(info, VCR, val);
4589 }
4590
4591 /*
4592 * set state of V24 control (output) signals
4593 */
4594 static void set_signals(struct slgt_info *info)
4595 {
4596 unsigned char val = rd_reg8(info, VCR);
4597 if (info->signals & SerialSignal_DTR)
4598 val |= BIT3;
4599 else
4600 val &= ~BIT3;
4601 if (info->signals & SerialSignal_RTS)
4602 val |= BIT2;
4603 else
4604 val &= ~BIT2;
4605 wr_reg8(info, VCR, val);
4606 }
4607
4608 /*
4609 * free range of receive DMA buffers (i to last)
4610 */
4611 static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last)
4612 {
4613 int done = 0;
4614
4615 while(!done) {
4616 /* reset current buffer for reuse */
4617 info->rbufs[i].status = 0;
4618 set_desc_count(info->rbufs[i], info->rbuf_fill_level);
4619 if (i == last)
4620 done = 1;
4621 if (++i == info->rbuf_count)
4622 i = 0;
4623 }
4624 info->rbuf_current = i;
4625 }
4626
4627 /*
4628 * mark all receive DMA buffers as free
4629 */
4630 static void reset_rbufs(struct slgt_info *info)
4631 {
4632 free_rbufs(info, 0, info->rbuf_count - 1);
4633 info->rbuf_fill_index = 0;
4634 info->rbuf_fill_count = 0;
4635 }
4636
4637 /*
4638 * pass receive HDLC frame to upper layer
4639 *
4640 * return true if frame available, otherwise false
4641 */
4642 static bool rx_get_frame(struct slgt_info *info)
4643 {
4644 unsigned int start, end;
4645 unsigned short status;
4646 unsigned int framesize = 0;
4647 unsigned long flags;
4648 struct tty_struct *tty = info->port.tty;
4649 unsigned char addr_field = 0xff;
4650 unsigned int crc_size = 0;
4651
4652 switch (info->params.crc_type & HDLC_CRC_MASK) {
4653 case HDLC_CRC_16_CCITT: crc_size = 2; break;
4654 case HDLC_CRC_32_CCITT: crc_size = 4; break;
4655 }
4656
4657 check_again:
4658
4659 framesize = 0;
4660 addr_field = 0xff;
4661 start = end = info->rbuf_current;
4662
4663 for (;;) {
4664 if (!desc_complete(info->rbufs[end]))
4665 goto cleanup;
4666
4667 if (framesize == 0 && info->params.addr_filter != 0xff)
4668 addr_field = info->rbufs[end].buf[0];
4669
4670 framesize += desc_count(info->rbufs[end]);
4671
4672 if (desc_eof(info->rbufs[end]))
4673 break;
4674
4675 if (++end == info->rbuf_count)
4676 end = 0;
4677
4678 if (end == info->rbuf_current) {
4679 if (info->rx_enabled){
4680 spin_lock_irqsave(&info->lock,flags);
4681 rx_start(info);
4682 spin_unlock_irqrestore(&info->lock,flags);
4683 }
4684 goto cleanup;
4685 }
4686 }
4687
4688 /* status
4689 *
4690 * 15 buffer complete
4691 * 14..06 reserved
4692 * 05..04 residue
4693 * 02 eof (end of frame)
4694 * 01 CRC error
4695 * 00 abort
4696 */
4697 status = desc_status(info->rbufs[end]);
4698
4699 /* ignore CRC bit if not using CRC (bit is undefined) */
4700 if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE)
4701 status &= ~BIT1;
4702
4703 if (framesize == 0 ||
4704 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4705 free_rbufs(info, start, end);
4706 goto check_again;
4707 }
4708
4709 if (framesize < (2 + crc_size) || status & BIT0) {
4710 info->icount.rxshort++;
4711 framesize = 0;
4712 } else if (status & BIT1) {
4713 info->icount.rxcrc++;
4714 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX))
4715 framesize = 0;
4716 }
4717
4718 #if SYNCLINK_GENERIC_HDLC
4719 if (framesize == 0) {
4720 info->netdev->stats.rx_errors++;
4721 info->netdev->stats.rx_frame_errors++;
4722 }
4723 #endif
4724
4725 DBGBH(("%s rx frame status=%04X size=%d\n",
4726 info->device_name, status, framesize));
4727 DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, info->rbuf_fill_level), "rx");
4728
4729 if (framesize) {
4730 if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
4731 framesize -= crc_size;
4732 crc_size = 0;
4733 }
4734
4735 if (framesize > info->max_frame_size + crc_size)
4736 info->icount.rxlong++;
4737 else {
4738 /* copy dma buffer(s) to contiguous temp buffer */
4739 int copy_count = framesize;
4740 int i = start;
4741 unsigned char *p = info->tmp_rbuf;
4742 info->tmp_rbuf_count = framesize;
4743
4744 info->icount.rxok++;
4745
4746 while(copy_count) {
4747 int partial_count = min_t(int, copy_count, info->rbuf_fill_level);
4748 memcpy(p, info->rbufs[i].buf, partial_count);
4749 p += partial_count;
4750 copy_count -= partial_count;
4751 if (++i == info->rbuf_count)
4752 i = 0;
4753 }
4754
4755 if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
4756 *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK;
4757 framesize++;
4758 }
4759
4760 #if SYNCLINK_GENERIC_HDLC
4761 if (info->netcount)
4762 hdlcdev_rx(info,info->tmp_rbuf, framesize);
4763 else
4764 #endif
4765 ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize);
4766 }
4767 }
4768 free_rbufs(info, start, end);
4769 return true;
4770
4771 cleanup:
4772 return false;
4773 }
4774
4775 /*
4776 * pass receive buffer (RAW synchronous mode) to tty layer
4777 * return true if buffer available, otherwise false
4778 */
4779 static bool rx_get_buf(struct slgt_info *info)
4780 {
4781 unsigned int i = info->rbuf_current;
4782 unsigned int count;
4783
4784 if (!desc_complete(info->rbufs[i]))
4785 return false;
4786 count = desc_count(info->rbufs[i]);
4787 switch(info->params.mode) {
4788 case MGSL_MODE_MONOSYNC:
4789 case MGSL_MODE_BISYNC:
4790 case MGSL_MODE_XSYNC:
4791 /* ignore residue in byte synchronous modes */
4792 if (desc_residue(info->rbufs[i]))
4793 count--;
4794 break;
4795 }
4796 DBGDATA(info, info->rbufs[i].buf, count, "rx");
4797 DBGINFO(("rx_get_buf size=%d\n", count));
4798 if (count)
4799 ldisc_receive_buf(info->port.tty, info->rbufs[i].buf,
4800 info->flag_buf, count);
4801 free_rbufs(info, i, i);
4802 return true;
4803 }
4804
4805 static void reset_tbufs(struct slgt_info *info)
4806 {
4807 unsigned int i;
4808 info->tbuf_current = 0;
4809 for (i=0 ; i < info->tbuf_count ; i++) {
4810 info->tbufs[i].status = 0;
4811 info->tbufs[i].count = 0;
4812 }
4813 }
4814
4815 /*
4816 * return number of free transmit DMA buffers
4817 */
4818 static unsigned int free_tbuf_count(struct slgt_info *info)
4819 {
4820 unsigned int count = 0;
4821 unsigned int i = info->tbuf_current;
4822
4823 do
4824 {
4825 if (desc_count(info->tbufs[i]))
4826 break; /* buffer in use */
4827 ++count;
4828 if (++i == info->tbuf_count)
4829 i=0;
4830 } while (i != info->tbuf_current);
4831
4832 /* if tx DMA active, last zero count buffer is in use */
4833 if (count && (rd_reg32(info, TDCSR) & BIT0))
4834 --count;
4835
4836 return count;
4837 }
4838
4839 /*
4840 * return number of bytes in unsent transmit DMA buffers
4841 * and the serial controller tx FIFO
4842 */
4843 static unsigned int tbuf_bytes(struct slgt_info *info)
4844 {
4845 unsigned int total_count = 0;
4846 unsigned int i = info->tbuf_current;
4847 unsigned int reg_value;
4848 unsigned int count;
4849 unsigned int active_buf_count = 0;
4850
4851 /*
4852 * Add descriptor counts for all tx DMA buffers.
4853 * If count is zero (cleared by DMA controller after read),
4854 * the buffer is complete or is actively being read from.
4855 *
4856 * Record buf_count of last buffer with zero count starting
4857 * from current ring position. buf_count is mirror
4858 * copy of count and is not cleared by serial controller.
4859 * If DMA controller is active, that buffer is actively
4860 * being read so add to total.
4861 */
4862 do {
4863 count = desc_count(info->tbufs[i]);
4864 if (count)
4865 total_count += count;
4866 else if (!total_count)
4867 active_buf_count = info->tbufs[i].buf_count;
4868 if (++i == info->tbuf_count)
4869 i = 0;
4870 } while (i != info->tbuf_current);
4871
4872 /* read tx DMA status register */
4873 reg_value = rd_reg32(info, TDCSR);
4874
4875 /* if tx DMA active, last zero count buffer is in use */
4876 if (reg_value & BIT0)
4877 total_count += active_buf_count;
4878
4879 /* add tx FIFO count = reg_value[15..8] */
4880 total_count += (reg_value >> 8) & 0xff;
4881
4882 /* if transmitter active add one byte for shift register */
4883 if (info->tx_active)
4884 total_count++;
4885
4886 return total_count;
4887 }
4888
4889 /*
4890 * load data into transmit DMA buffer ring and start transmitter if needed
4891 * return true if data accepted, otherwise false (buffers full)
4892 */
4893 static bool tx_load(struct slgt_info *info, const char *buf, unsigned int size)
4894 {
4895 unsigned short count;
4896 unsigned int i;
4897 struct slgt_desc *d;
4898
4899 /* check required buffer space */
4900 if (DIV_ROUND_UP(size, DMABUFSIZE) > free_tbuf_count(info))
4901 return false;
4902
4903 DBGDATA(info, buf, size, "tx");
4904
4905 /*
4906 * copy data to one or more DMA buffers in circular ring
4907 * tbuf_start = first buffer for this data
4908 * tbuf_current = next free buffer
4909 *
4910 * Copy all data before making data visible to DMA controller by
4911 * setting descriptor count of the first buffer.
4912 * This prevents an active DMA controller from reading the first DMA
4913 * buffers of a frame and stopping before the final buffers are filled.
4914 */
4915
4916 info->tbuf_start = i = info->tbuf_current;
4917
4918 while (size) {
4919 d = &info->tbufs[i];
4920
4921 count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size);
4922 memcpy(d->buf, buf, count);
4923
4924 size -= count;
4925 buf += count;
4926
4927 /*
4928 * set EOF bit for last buffer of HDLC frame or
4929 * for every buffer in raw mode
4930 */
4931 if ((!size && info->params.mode == MGSL_MODE_HDLC) ||
4932 info->params.mode == MGSL_MODE_RAW)
4933 set_desc_eof(*d, 1);
4934 else
4935 set_desc_eof(*d, 0);
4936
4937 /* set descriptor count for all but first buffer */
4938 if (i != info->tbuf_start)
4939 set_desc_count(*d, count);
4940 d->buf_count = count;
4941
4942 if (++i == info->tbuf_count)
4943 i = 0;
4944 }
4945
4946 info->tbuf_current = i;
4947
4948 /* set first buffer count to make new data visible to DMA controller */
4949 d = &info->tbufs[info->tbuf_start];
4950 set_desc_count(*d, d->buf_count);
4951
4952 /* start transmitter if needed and update transmit timeout */
4953 if (!info->tx_active)
4954 tx_start(info);
4955 update_tx_timer(info);
4956
4957 return true;
4958 }
4959
4960 static int register_test(struct slgt_info *info)
4961 {
4962 static unsigned short patterns[] =
4963 {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696};
4964 static unsigned int count = ARRAY_SIZE(patterns);
4965 unsigned int i;
4966 int rc = 0;
4967
4968 for (i=0 ; i < count ; i++) {
4969 wr_reg16(info, TIR, patterns[i]);
4970 wr_reg16(info, BDR, patterns[(i+1)%count]);
4971 if ((rd_reg16(info, TIR) != patterns[i]) ||
4972 (rd_reg16(info, BDR) != patterns[(i+1)%count])) {
4973 rc = -ENODEV;
4974 break;
4975 }
4976 }
4977 info->gpio_present = (rd_reg32(info, JCR) & BIT5) ? 1 : 0;
4978 info->init_error = rc ? 0 : DiagStatus_AddressFailure;
4979 return rc;
4980 }
4981
4982 static int irq_test(struct slgt_info *info)
4983 {
4984 unsigned long timeout;
4985 unsigned long flags;
4986 struct tty_struct *oldtty = info->port.tty;
4987 u32 speed = info->params.data_rate;
4988
4989 info->params.data_rate = 921600;
4990 info->port.tty = NULL;
4991
4992 spin_lock_irqsave(&info->lock, flags);
4993 async_mode(info);
4994 slgt_irq_on(info, IRQ_TXIDLE);
4995
4996 /* enable transmitter */
4997 wr_reg16(info, TCR,
4998 (unsigned short)(rd_reg16(info, TCR) | BIT1));
4999
5000 /* write one byte and wait for tx idle */
5001 wr_reg16(info, TDR, 0);
5002
5003 /* assume failure */
5004 info->init_error = DiagStatus_IrqFailure;
5005 info->irq_occurred = false;
5006
5007 spin_unlock_irqrestore(&info->lock, flags);
5008
5009 timeout=100;
5010 while(timeout-- && !info->irq_occurred)
5011 msleep_interruptible(10);
5012
5013 spin_lock_irqsave(&info->lock,flags);
5014 reset_port(info);
5015 spin_unlock_irqrestore(&info->lock,flags);
5016
5017 info->params.data_rate = speed;
5018 info->port.tty = oldtty;
5019
5020 info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure;
5021 return info->irq_occurred ? 0 : -ENODEV;
5022 }
5023
5024 static int loopback_test_rx(struct slgt_info *info)
5025 {
5026 unsigned char *src, *dest;
5027 int count;
5028
5029 if (desc_complete(info->rbufs[0])) {
5030 count = desc_count(info->rbufs[0]);
5031 src = info->rbufs[0].buf;
5032 dest = info->tmp_rbuf;
5033
5034 for( ; count ; count-=2, src+=2) {
5035 /* src=data byte (src+1)=status byte */
5036 if (!(*(src+1) & (BIT9 + BIT8))) {
5037 *dest = *src;
5038 dest++;
5039 info->tmp_rbuf_count++;
5040 }
5041 }
5042 DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx");
5043 return 1;
5044 }
5045 return 0;
5046 }
5047
5048 static int loopback_test(struct slgt_info *info)
5049 {
5050 #define TESTFRAMESIZE 20
5051
5052 unsigned long timeout;
5053 u16 count = TESTFRAMESIZE;
5054 unsigned char buf[TESTFRAMESIZE];
5055 int rc = -ENODEV;
5056 unsigned long flags;
5057
5058 struct tty_struct *oldtty = info->port.tty;
5059 MGSL_PARAMS params;
5060
5061 memcpy(&params, &info->params, sizeof(params));
5062
5063 info->params.mode = MGSL_MODE_ASYNC;
5064 info->params.data_rate = 921600;
5065 info->params.loopback = 1;
5066 info->port.tty = NULL;
5067
5068 /* build and send transmit frame */
5069 for (count = 0; count < TESTFRAMESIZE; ++count)
5070 buf[count] = (unsigned char)count;
5071
5072 info->tmp_rbuf_count = 0;
5073 memset(info->tmp_rbuf, 0, TESTFRAMESIZE);
5074
5075 /* program hardware for HDLC and enabled receiver */
5076 spin_lock_irqsave(&info->lock,flags);
5077 async_mode(info);
5078 rx_start(info);
5079 tx_load(info, buf, count);
5080 spin_unlock_irqrestore(&info->lock, flags);
5081
5082 /* wait for receive complete */
5083 for (timeout = 100; timeout; --timeout) {
5084 msleep_interruptible(10);
5085 if (loopback_test_rx(info)) {
5086 rc = 0;
5087 break;
5088 }
5089 }
5090
5091 /* verify received frame length and contents */
5092 if (!rc && (info->tmp_rbuf_count != count ||
5093 memcmp(buf, info->tmp_rbuf, count))) {
5094 rc = -ENODEV;
5095 }
5096
5097 spin_lock_irqsave(&info->lock,flags);
5098 reset_adapter(info);
5099 spin_unlock_irqrestore(&info->lock,flags);
5100
5101 memcpy(&info->params, &params, sizeof(info->params));
5102 info->port.tty = oldtty;
5103
5104 info->init_error = rc ? DiagStatus_DmaFailure : 0;
5105 return rc;
5106 }
5107
5108 static int adapter_test(struct slgt_info *info)
5109 {
5110 DBGINFO(("testing %s\n", info->device_name));
5111 if (register_test(info) < 0) {
5112 printk("register test failure %s addr=%08X\n",
5113 info->device_name, info->phys_reg_addr);
5114 } else if (irq_test(info) < 0) {
5115 printk("IRQ test failure %s IRQ=%d\n",
5116 info->device_name, info->irq_level);
5117 } else if (loopback_test(info) < 0) {
5118 printk("loopback test failure %s\n", info->device_name);
5119 }
5120 return info->init_error;
5121 }
5122
5123 /*
5124 * transmit timeout handler
5125 */
5126 static void tx_timeout(unsigned long context)
5127 {
5128 struct slgt_info *info = (struct slgt_info*)context;
5129 unsigned long flags;
5130
5131 DBGINFO(("%s tx_timeout\n", info->device_name));
5132 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
5133 info->icount.txtimeout++;
5134 }
5135 spin_lock_irqsave(&info->lock,flags);
5136 tx_stop(info);
5137 spin_unlock_irqrestore(&info->lock,flags);
5138
5139 #if SYNCLINK_GENERIC_HDLC
5140 if (info->netcount)
5141 hdlcdev_tx_done(info);
5142 else
5143 #endif
5144 bh_transmit(info);
5145 }
5146
5147 /*
5148 * receive buffer polling timer
5149 */
5150 static void rx_timeout(unsigned long context)
5151 {
5152 struct slgt_info *info = (struct slgt_info*)context;
5153 unsigned long flags;
5154
5155 DBGINFO(("%s rx_timeout\n", info->device_name));
5156 spin_lock_irqsave(&info->lock, flags);
5157 info->pending_bh |= BH_RECEIVE;
5158 spin_unlock_irqrestore(&info->lock, flags);
5159 bh_handler(&info->task);
5160 }
5161
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree