Don't include linux/config.h from anywhere else in include/
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / include / asm-arm / system.h
blobf5eafd7ed8fada72d8b3e7e63403016b604a14cb
1 #ifndef __ASM_ARM_SYSTEM_H
2 #define __ASM_ARM_SYSTEM_H
4 #ifdef __KERNEL__
7 #define CPU_ARCH_UNKNOWN 0
8 #define CPU_ARCH_ARMv3 1
9 #define CPU_ARCH_ARMv4 2
10 #define CPU_ARCH_ARMv4T 3
11 #define CPU_ARCH_ARMv5 4
12 #define CPU_ARCH_ARMv5T 5
13 #define CPU_ARCH_ARMv5TE 6
14 #define CPU_ARCH_ARMv5TEJ 7
15 #define CPU_ARCH_ARMv6 8
18 * CR1 bits (CP#15 CR1)
20 #define CR_M (1 << 0) /* MMU enable */
21 #define CR_A (1 << 1) /* Alignment abort enable */
22 #define CR_C (1 << 2) /* Dcache enable */
23 #define CR_W (1 << 3) /* Write buffer enable */
24 #define CR_P (1 << 4) /* 32-bit exception handler */
25 #define CR_D (1 << 5) /* 32-bit data address range */
26 #define CR_L (1 << 6) /* Implementation defined */
27 #define CR_B (1 << 7) /* Big endian */
28 #define CR_S (1 << 8) /* System MMU protection */
29 #define CR_R (1 << 9) /* ROM MMU protection */
30 #define CR_F (1 << 10) /* Implementation defined */
31 #define CR_Z (1 << 11) /* Implementation defined */
32 #define CR_I (1 << 12) /* Icache enable */
33 #define CR_V (1 << 13) /* Vectors relocated to 0xffff0000 */
34 #define CR_RR (1 << 14) /* Round Robin cache replacement */
35 #define CR_L4 (1 << 15) /* LDR pc can set T bit */
36 #define CR_DT (1 << 16)
37 #define CR_IT (1 << 18)
38 #define CR_ST (1 << 19)
39 #define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */
40 #define CR_U (1 << 22) /* Unaligned access operation */
41 #define CR_XP (1 << 23) /* Extended page tables */
42 #define CR_VE (1 << 24) /* Vectored interrupts */
44 #define CPUID_ID 0
45 #define CPUID_CACHETYPE 1
46 #define CPUID_TCM 2
47 #define CPUID_TLBTYPE 3
49 #define read_cpuid(reg) \
50 ({ \
51 unsigned int __val; \
52 asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
53 : "=r" (__val) \
54 : \
55 : "cc"); \
56 __val; \
60 * This is used to ensure the compiler did actually allocate the register we
61 * asked it for some inline assembly sequences. Apparently we can't trust
62 * the compiler from one version to another so a bit of paranoia won't hurt.
63 * This string is meant to be concatenated with the inline asm string and
64 * will cause compilation to stop on mismatch.
65 * (for details, see gcc PR 15089)
67 #define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t"
69 #ifndef __ASSEMBLY__
71 #include <linux/linkage.h>
73 struct thread_info;
74 struct task_struct;
76 /* information about the system we're running on */
77 extern unsigned int system_rev;
78 extern unsigned int system_serial_low;
79 extern unsigned int system_serial_high;
80 extern unsigned int mem_fclk_21285;
82 struct pt_regs;
84 void die(const char *msg, struct pt_regs *regs, int err)
85 __attribute__((noreturn));
87 struct siginfo;
88 void notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
89 unsigned long err, unsigned long trap);
91 void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
92 struct pt_regs *),
93 int sig, const char *name);
95 #define xchg(ptr,x) \
96 ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
98 #define tas(ptr) (xchg((ptr),1))
100 extern asmlinkage void __backtrace(void);
101 extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
103 struct mm_struct;
104 extern void show_pte(struct mm_struct *mm, unsigned long addr);
105 extern void __show_regs(struct pt_regs *);
107 extern int cpu_architecture(void);
108 extern void cpu_init(void);
111 * Intel's XScale3 core supports some v6 features (supersections, L2)
112 * but advertises itself as v5 as it does not support the v6 ISA. For
113 * this reason, we need a way to explicitly test for this type of CPU.
115 #ifndef CONFIG_CPU_XSC3
116 #define cpu_is_xsc3() 0
117 #else
118 static inline int cpu_is_xsc3(void)
120 extern unsigned int processor_id;
122 if ((processor_id & 0xffffe000) == 0x69056000)
123 return 1;
125 return 0;
127 #endif
129 #define set_cr(x) \
130 __asm__ __volatile__( \
131 "mcr p15, 0, %0, c1, c0, 0 @ set CR" \
132 : : "r" (x) : "cc")
134 #define get_cr() \
135 ({ \
136 unsigned int __val; \
137 __asm__ __volatile__( \
138 "mrc p15, 0, %0, c1, c0, 0 @ get CR" \
139 : "=r" (__val) : : "cc"); \
140 __val; \
143 extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
144 extern unsigned long cr_alignment; /* defined in entry-armv.S */
146 #define UDBG_UNDEFINED (1 << 0)
147 #define UDBG_SYSCALL (1 << 1)
148 #define UDBG_BADABORT (1 << 2)
149 #define UDBG_SEGV (1 << 3)
150 #define UDBG_BUS (1 << 4)
152 extern unsigned int user_debug;
154 #if __LINUX_ARM_ARCH__ >= 4
155 #define vectors_high() (cr_alignment & CR_V)
156 #else
157 #define vectors_high() (0)
158 #endif
160 #if __LINUX_ARM_ARCH__ >= 6
161 #define mb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
162 : : "r" (0) : "memory")
163 #else
164 #define mb() __asm__ __volatile__ ("" : : : "memory")
165 #endif
166 #define rmb() mb()
167 #define wmb() mb()
168 #define read_barrier_depends() do { } while(0)
169 #define set_mb(var, value) do { var = value; mb(); } while (0)
170 #define set_wmb(var, value) do { var = value; wmb(); } while (0)
171 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
174 * switch_mm() may do a full cache flush over the context switch,
175 * so enable interrupts over the context switch to avoid high
176 * latency.
178 #define __ARCH_WANT_INTERRUPTS_ON_CTXSW
181 * switch_to(prev, next) should switch from task `prev' to `next'
182 * `prev' will never be the same as `next'. schedule() itself
183 * contains the memory barrier to tell GCC not to cache `current'.
185 extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
187 #define switch_to(prev,next,last) \
188 do { \
189 last = __switch_to(prev,task_thread_info(prev), task_thread_info(next)); \
190 } while (0)
193 * On SMP systems, when the scheduler does migration-cost autodetection,
194 * it needs a way to flush as much of the CPU's caches as possible.
196 * TODO: fill this in!
198 static inline void sched_cacheflush(void)
203 * CPU interrupt mask handling.
205 #if __LINUX_ARM_ARCH__ >= 6
207 #define local_irq_save(x) \
208 ({ \
209 __asm__ __volatile__( \
210 "mrs %0, cpsr @ local_irq_save\n" \
211 "cpsid i" \
212 : "=r" (x) : : "memory", "cc"); \
215 #define local_irq_enable() __asm__("cpsie i @ __sti" : : : "memory", "cc")
216 #define local_irq_disable() __asm__("cpsid i @ __cli" : : : "memory", "cc")
217 #define local_fiq_enable() __asm__("cpsie f @ __stf" : : : "memory", "cc")
218 #define local_fiq_disable() __asm__("cpsid f @ __clf" : : : "memory", "cc")
220 #else
223 * Save the current interrupt enable state & disable IRQs
225 #define local_irq_save(x) \
226 ({ \
227 unsigned long temp; \
228 (void) (&temp == &x); \
229 __asm__ __volatile__( \
230 "mrs %0, cpsr @ local_irq_save\n" \
231 " orr %1, %0, #128\n" \
232 " msr cpsr_c, %1" \
233 : "=r" (x), "=r" (temp) \
235 : "memory", "cc"); \
239 * Enable IRQs
241 #define local_irq_enable() \
242 ({ \
243 unsigned long temp; \
244 __asm__ __volatile__( \
245 "mrs %0, cpsr @ local_irq_enable\n" \
246 " bic %0, %0, #128\n" \
247 " msr cpsr_c, %0" \
248 : "=r" (temp) \
250 : "memory", "cc"); \
254 * Disable IRQs
256 #define local_irq_disable() \
257 ({ \
258 unsigned long temp; \
259 __asm__ __volatile__( \
260 "mrs %0, cpsr @ local_irq_disable\n" \
261 " orr %0, %0, #128\n" \
262 " msr cpsr_c, %0" \
263 : "=r" (temp) \
265 : "memory", "cc"); \
269 * Enable FIQs
271 #define local_fiq_enable() \
272 ({ \
273 unsigned long temp; \
274 __asm__ __volatile__( \
275 "mrs %0, cpsr @ stf\n" \
276 " bic %0, %0, #64\n" \
277 " msr cpsr_c, %0" \
278 : "=r" (temp) \
280 : "memory", "cc"); \
284 * Disable FIQs
286 #define local_fiq_disable() \
287 ({ \
288 unsigned long temp; \
289 __asm__ __volatile__( \
290 "mrs %0, cpsr @ clf\n" \
291 " orr %0, %0, #64\n" \
292 " msr cpsr_c, %0" \
293 : "=r" (temp) \
295 : "memory", "cc"); \
298 #endif
301 * Save the current interrupt enable state.
303 #define local_save_flags(x) \
304 ({ \
305 __asm__ __volatile__( \
306 "mrs %0, cpsr @ local_save_flags" \
307 : "=r" (x) : : "memory", "cc"); \
311 * restore saved IRQ & FIQ state
313 #define local_irq_restore(x) \
314 __asm__ __volatile__( \
315 "msr cpsr_c, %0 @ local_irq_restore\n" \
317 : "r" (x) \
318 : "memory", "cc")
320 #define irqs_disabled() \
321 ({ \
322 unsigned long flags; \
323 local_save_flags(flags); \
324 (int)(flags & PSR_I_BIT); \
327 #ifdef CONFIG_SMP
329 #define smp_mb() mb()
330 #define smp_rmb() rmb()
331 #define smp_wmb() wmb()
332 #define smp_read_barrier_depends() read_barrier_depends()
334 #else
336 #define smp_mb() barrier()
337 #define smp_rmb() barrier()
338 #define smp_wmb() barrier()
339 #define smp_read_barrier_depends() do { } while(0)
341 #endif /* CONFIG_SMP */
343 #if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
345 * On the StrongARM, "swp" is terminally broken since it bypasses the
346 * cache totally. This means that the cache becomes inconsistent, and,
347 * since we use normal loads/stores as well, this is really bad.
348 * Typically, this causes oopsen in filp_close, but could have other,
349 * more disasterous effects. There are two work-arounds:
350 * 1. Disable interrupts and emulate the atomic swap
351 * 2. Clean the cache, perform atomic swap, flush the cache
353 * We choose (1) since its the "easiest" to achieve here and is not
354 * dependent on the processor type.
356 * NOTE that this solution won't work on an SMP system, so explcitly
357 * forbid it here.
359 #define swp_is_buggy
360 #endif
362 static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
364 extern void __bad_xchg(volatile void *, int);
365 unsigned long ret;
366 #ifdef swp_is_buggy
367 unsigned long flags;
368 #endif
369 #if __LINUX_ARM_ARCH__ >= 6
370 unsigned int tmp;
371 #endif
373 switch (size) {
374 #if __LINUX_ARM_ARCH__ >= 6
375 case 1:
376 asm volatile("@ __xchg1\n"
377 "1: ldrexb %0, [%3]\n"
378 " strexb %1, %2, [%3]\n"
379 " teq %1, #0\n"
380 " bne 1b"
381 : "=&r" (ret), "=&r" (tmp)
382 : "r" (x), "r" (ptr)
383 : "memory", "cc");
384 break;
385 case 4:
386 asm volatile("@ __xchg4\n"
387 "1: ldrex %0, [%3]\n"
388 " strex %1, %2, [%3]\n"
389 " teq %1, #0\n"
390 " bne 1b"
391 : "=&r" (ret), "=&r" (tmp)
392 : "r" (x), "r" (ptr)
393 : "memory", "cc");
394 break;
395 #elif defined(swp_is_buggy)
396 #ifdef CONFIG_SMP
397 #error SMP is not supported on this platform
398 #endif
399 case 1:
400 local_irq_save(flags);
401 ret = *(volatile unsigned char *)ptr;
402 *(volatile unsigned char *)ptr = x;
403 local_irq_restore(flags);
404 break;
406 case 4:
407 local_irq_save(flags);
408 ret = *(volatile unsigned long *)ptr;
409 *(volatile unsigned long *)ptr = x;
410 local_irq_restore(flags);
411 break;
412 #else
413 case 1:
414 asm volatile("@ __xchg1\n"
415 " swpb %0, %1, [%2]"
416 : "=&r" (ret)
417 : "r" (x), "r" (ptr)
418 : "memory", "cc");
419 break;
420 case 4:
421 asm volatile("@ __xchg4\n"
422 " swp %0, %1, [%2]"
423 : "=&r" (ret)
424 : "r" (x), "r" (ptr)
425 : "memory", "cc");
426 break;
427 #endif
428 default:
429 __bad_xchg(ptr, size), ret = 0;
430 break;
433 return ret;
436 extern void disable_hlt(void);
437 extern void enable_hlt(void);
439 #endif /* __ASSEMBLY__ */
441 #define arch_align_stack(x) (x)
443 #endif /* __KERNEL__ */
445 #endif